Gebruiksaanwijzing /service van het product AGP 4X/8X van de fabrikant Gigabyte
Ga naar pagina of 96
When you installing AGP card, please make sure the following notice is fully understood and practiced. If your AGP card has "AGP 4X/8X (1.5V) notch"(show below), please make sure your AGP card is AGP 4X/8X (1.5V). Caution: AGP 2X card is not supported by Intel ® 845(GE/PE) / 845(E/ G) / 850(E) / E7205 / 865(G/PE/P) / 875P .
0 0 0 0 0 The author assumes no responsibility for any errors or omissions that may appear in this document nor does the author make a commitment to update the information contained herein. 0 0 0 0 0 Third-party brands and names are the property of their respective owners.
May 14, 2004 Mother Board GA-8IPE775 Pro/GA-8IPE775-G/GA-8IPE775.
FCC Part 15, Subpart B, Section 15.107(a) and Section 15.109 (a),Class B Digital Device DECLARA TION OF CONFORMITY Per FCC Part 2 Section 2.1077(a) Responsible Party Name: Addre ss: Phone/Fax No: hereby declares that the product Pr oduct Name: Conforms to the following specifications: This device complies with part 15 of the FCC Rules.
USER'S MANUAL GA-8IPE775 Series Intel ® Pentium ® 4 Socket 775 Processor Motherboard Pentium ® 4 Processor Motherboard Rev. 1004 12ME-8IPE775-1004.
- 2 - GA-8IPE775 Series Motherboard English T able of Content Warning ................................................................................................... 4 Chapter 1 Introduction ........................................................
T able of Content English - 3 - PnP/PCI Configurations ............................................................................. 4 5 PC Health Status ........................................................................................ 4 6 Frequency/V oltage Control .
- 4 - GA-8IPE775 Series Motherboard English Computer motherboards and expansion cards contain very delicate Integrated Circuit (IC) chips. T o protect them against damage from static electricity, you should follow some precautions whenever you work on your computer.
Introduction English - 5 - CPU y Supports the latest Intel ® Pentium ® 4 Socket 775 CPU y Supports 533/800MHz FSB y L2 cache varies with CPU Motherboard y GA-8IPE775 Series Motherboard: GA-8IPE775 P.
- 6 - GA-8IPE775 Series Motherboard English On-Board LAN y Build in Marvell 8001 Chipset (10/100/1000 Mbit) y 1 RJ45 port On-Board IEEE1394 y Ti TSB43AB23 On-Board Sound y ALC850 CODEC (UAJ) y Support.
Introduction English - 7 - Only for GA-8IPE775 Pro. Only for GA-8IPE775-G. CD_IN GA-8IPE775 (Pro/-G) KB_MS COMA LPT USB LAN ATX_12V SOCKET 775 CPU_FAN FDD IDE1 IDE2 DDR2 COMB PWR_LED BAT PCI1 PCI2 F_U.
- 8 - GA-8IPE775 Series Motherboard English Block Diagram Serial A T A Channels LGA 775 Processor Intel 865PE AC97 CODEC ICH5 CPUCLK+/- (200MHz) System Bus 800MHz 266/333/400MHz ZCLK (66MHz) HCLK+/- (200MHz) 66MHz 33 MHz 14.318 MHz 48 MHz 24 MHz 33 MHz LPC BUS AGP 8X/4X AGPCLK (66MHz) 5 PCI PCICLK (33MHz) AC97 Link MIC LINE-IN LINE-OUT 8 USB (2.
Introduction English - 9 -.
- 10 - GA-8IPE775 Series Motherboard English.
Hardware Installation Process English - 11 - T o set up your computer , you must complete the following steps: Step 1- Install the Central Processing Unit (CPU) Step 2- Install memory modules Step 3- .
- 12 - GA-8IPE775 Series Motherboard English Step 1: Install the Central Processing Unit (CPU) Step 1-1: Installation of the CPU Before installing the CPU, please comply with the following conditions: 1 . Please make sure that the motherboard supports the CPU.
Hardware Installation Process English - 13 - Step 1-2: Installation of the Heatsink Fig.1 Please apply an even layer of heatsink paste on the surface of the installed CPU. Fig. 3 Please attach the power connector of the heatsink to the CPU fan header located on the motherboard.
- 14 - GA-8IPE775 Series Motherboard English 1 . The DIMM socket has a notch, so the DIMM memory module can only fit in one direction. 2 . Insert the DIMM memory module vertically into the DIMM socket. Then push it down. 3 . Close the plastic clip at both edges of the DIMM sockets to lock the DIMM module.
Hardware Installation Process English - 15 - GA-8IPE775 Series supports the Dual Channel T echnology . After operating the Dual Channel T echnology , the bandwidth of Memory Bus will add double up to 6.
- 16 - GA-8IPE775 Series Motherboard English Step 3: Install expansion cards 1 . Read the related expansion card's instruction document before install the expansion card into the computer. 2 . Remove your computer's chassis cover, screws and slot bracket from the computer.
Hardware Installation Process English - 17 - Step 4: Install I/O Peripherals Cables Step 4-1: I/O Back Panel Introduction This connector supports standard PS/2 keyboard and PS/2 mouse. PS/2 Mouse Connector (6 pin Female) PS/2 Keyboard Connector (6 pin Female) This connector supports 2 standard COM ports and 1 Parallel port.
- 18 - GA-8IPE775 Series Motherboard English If you want the detail information for 2-/4-/6-/8-channel audio setup installation, please refer to page 67. Before you connect your device(s) into USB connector(s), please make sure your device(s) such as USB keyboard,mouse, scanner, zip, speaker.
Hardware Installation Process English - 19 - Step 4-2: Connectors Introduction 1 3 2 7 18 8 17 14 19 15 11 4 16 23 9 13 6 20 5 10 12 22 21 1 ) A TX_12V 2) A TX 3) CPU_FAN 4 ) SYS_F AN 5) PWR_F AN 6) I.
- 20 - GA-8IPE775 Series Motherboard English 1/2) A TX_12V/A TX (Power Connector) With the use of the power connector, the power supply can supply enough stable power to all the components on the motherboard. Before connecting the power connector, please make sure that all components and devices are properly installed.
Hardware Installation Process English - 21 - 3/4/5) CPU_F AN / SYS_F AN / PWR_F AN (Cooler Fan Power Connector) The cooler fan power connector supplies a +12V power voltage via a 3-pin power connector and possesses a foolproof connection design. Most coolers are designed with color-coded power connector wires.
- 22 - GA-8IPE775 Series Motherboard English 7) FDD (Floppy Connector) Please connect the floppy drive ribbon cables to FDD. It supports 360K, 1.2M, 720K, 1.44M and 2.88M bytes floppy disk types. The red stripe of the ribbon cable must be the same side with the Pin1.
Hardware Installation Process English - 23 - 9) F_P ANEL (2 x 10 pins Connector) Please connect the power LED, PC speaker, reset switch and power switch etc. of your chassis front panel to the F_P ANEL connector according to the pin assignment below .
- 24 - GA-8IPE775 Series Motherboard English 10) F_AUDIO (Front Audio Connector) If you want to use Front Audio connector, you must remove 5-6, 9-10 Jumper. In order to utilize the front audio header, your chassis must have front audio connector. Also please make sure the pin assigment on the cable is the same as the pin assigment on the MB header.
Hardware Installation Process English - 25 - 12) CD_IN (CD In Connector) Connect CD-ROM or DVD-ROM audio out to the connector. 1 Pin No. Definition 1 CD-L 2 GND 3 GND 4 CD-R 13) SPDIF_IO (SPDIF In/Out Connector) The SPDIF output is capable of providing digital audio to external speakers or compressed AC3 data to an external Dolby Digital Decoder.
- 26 - GA-8IPE775 Series Motherboard English Pin No. Definition 1 VCC 2N C 3 IRRX 4 GND 5 IRTX 6N C 7 CIRRX 8 +5VSB 9 CIRTX 10 N C 1 4) IR_CIR Make sure the pin 1 on the IR device is aling with pin one the connector . T o enable the IR/CIR function on the board, you are required to purchase an option IR/CIR module.
Hardware Installation Process English - 27 - 16) GAME (GAME Connector) This connector supports joystick, MIDI keyboard and other relate audio devices. 16 2 11 5 17 ) INFO_LINK This connector allows you to connect some external devices to provide you extra function.
- 28 - GA-8IPE775 Series Motherboard English 18) F1_1394 (IEEE 1394 Connector) Please Note: Serial interface standard set by Institute of Electrical and Electronics Engineers, which has features like high speed, high bandwidth and hot plug. Be careful with the polarity of the IEEE1394 connector.
Hardware Installation Process English - 29 - 21) CI (Chassis Intrusion, Case Open) This 2-pin connector allows your system to enable or disable the "Case Open" item in BIOS, if the system case begin remove.
- 30 - GA-8IPE775 Series Motherboard English 22) CLR_CMOS (Clear CMOS) Y ou may clear the CMOS data to its default values by this jumper. T o clear CMOS, temporarily short 1-2 pin. Default doesn't include the "Shunter" to prevent from improper use this jumper.
- 3 1 - BIOS Setup English < Ç > Move to previous item < È > Move to next item < Å > Move to the item in the left hand < Æ > Move to the item in the right hand Enter Select.
- 32 - GA-8IPE775 Series Motherboard English z z z z z Standard CMOS Features This setup page includes all the items in standard compatible BIOS. z z z z z Advanced BIOS Features This setup page includes all the items of A ward special enhanced features.
- 3 3 - BIOS Setup English z z z z z Power Management Setup This setup page includes all the items of Green function features. z z z z z PnP/PCI Configurations This setup page includes all the configurations of PCI & PnP ISA resources. z z z z z PC Health Status This setup page is the System auto detect T emperature, voltage, fan, speed.
- 34 - GA-8IPE775 Series Motherboard English Standard CMOS Features Date The date format is <week>, <month>, <day>, <year>. Week The week, from Sun to Sat, determined by the BIOS and is display only Month The month, Jan. Through Dec.
- 3 5 - BIOS Setup English IDE Channel 0 Master, Slave / IDE Channel 1 Master, Slave IDE HDD Auto-Detection Press "Enter" to select this option for automatic device detection. IDE Channel 0 Master(Slave) / IDE Channel 1 Master(Slave) IDE Device Setup.
- 36 - GA-8IPE775 Series Motherboard English Floppy 3 Mode Support (for Japan Area) Disabled Normal Floppy Drive. (Default value) Drive A Drive A is 3 mode Floppy Drive. Drive B Drive B is 3 mode Floppy Drive. Both Drive A & B are 3 mode Floppy Drives.
- 3 7 - BIOS Setup English Advanced BIOS Features Hard Disk Boot Priority Select boot sequence for onboard(or add-on cards) SCSI, RAID, etc. Use < > or < > to select a device, then press<+> to move it up, or <-> to move it down the list.
- 38 - GA-8IPE775 Series Motherboard English Password Check Setup The system will boot but will not access to Setup page if the correct password is not entered at the prompt. (Default value) System The system will not boot and will not access to Setup page if the correct password is not entered at the prompt.
- 3 9 - BIOS Setup English Integrated Peripherals CMOS Setup Utility-Copyright (C) 1984-2004 A ward Software Integrated Peripherals KLJI : Move Enter: Select +/-/PU/PD: V alue F10: Save ESC: Exit F1: .
- 40 - GA-8IPE775 Series Motherboard English On-Chip Primary PCI IDE Enabled Enable onboard 1st channel IDE port. (Default value) Disabled Disable onboard 1st channel IDE port. On-Chip Secondary PCI IDE Enabled Enable onboard 2nd channel IDE port. (Default value) Disabled Disable onboard 2nd channel IDE port.
- 4 1 - BIOS Setup English USB Mouse Support Enabled Enable USB Mouse Support. Disabled Disable USB Mouse Support. (Default value) AC97 Audio Auto Auto detect AC'97 audio function. (Default value) Disabled Disable AC'97 audio function. Onboard H/W 1394 Enabled Enable onboard IEEE 1394 function.
- 42 - GA-8IPE775 Series Motherboard English UART Mode Select This item allows you to determine which Infra Red(IR) function of Onboard I/O chip. ASKIR Set onboard I/O chip UART to ASKIR Mode. IrDA Set onboard I/O chip UART to IrDA Mode. Normal Set onboard I/O chip UART to Normal Mode.
- 4 3 - BIOS Setup English Midi Port IRQ 5 Set Midi Port IRQ to 5. 10 Set Midi Port IRQ to 10. (Default value) CIR Port Address 31 0 Set CIR Port Address to 310. 32 0 Set CIR Port Address to 320. Disabled Disable this function. (Default value) CIR Port IRQ 5 Set CIR Port IRQ to 5.
- 44 - GA-8IPE775 Series Motherboard English Off by Power button Instant-off Press power button then Power off instantly. (Default value) Delay 4 Sec. Press power button 4 sec. to Power off. Enter suspend if button is pressed less than 4 sec. PME Event Wake Up Disabled Disable this function.
- 4 5 - BIOS Setup English AC BACK Function Soft-Off When AC-power back to the system, the system will be in "Off" state. (Default value) Full-On When AC-power back to the system, the system always in "On" state. Memory When AC-power back to the system, the system will return to the Last state before AC-power off.
- 46 - GA-8IPE775 Series Motherboard English Reset Case Open Status Disabled Don't reset case open status. (Default value) Enabled Clear case open status at next boot. Case Opened If the case is closed, "Case Opened" will show "No".
- 4 7 - BIOS Setup English CPU W arning T emperature 60 o C / 140 o F Monitor CPU T emp. at 60 o C / 140 o F. 70 o C / 158 o F Monitor CPU T emp. at 70 o C / 158 o F. 80 o C / 176 o F Monitor CPU T emp. at 80 o C / 176 o F. 90 o C / 194 o F Monitor CPU T emp.
- 48 - GA-8IPE775 Series Motherboard English Frequency/V oltage Control CPU Clock Ratio This option will not be shown or not be available if you are using a CPU with the locked ratio. This setup option will automatically assign by CPU detection. The option will display "Locked" and read only if the CPU ratio is not changeable.
- 4 9 - BIOS Setup English AGP/PCI/SRC Fixed This item will be available when "CPU Host Clock Control" is set to Enabled. Serial A T A device is very sensitive to SRC clock. SRC over clock may make Serial A T A device function can't work properly.
- 50 - GA-8IPE775 Series Motherboard English CPU OverV oltage Control Supports adjustable CPU Vcore from 0.8375V to 1.7600V. (Default value: Normal) Normal CPU Vcore Display your CPU Vcore Voltage.
- 5 1 - BIOS Setup English Set Supervisor/User Password When you select this function, the following message will appear at the center of the screen to assist you in creating a password. T ype the password, up to eight characters, and press <Enter>.
- 52 - GA-8IPE775 Series Motherboard English Save & Exit Setup Type "Y" will quit the Setup Utility and save the user setup value to RTC CMOS.
T echnical Reference - 53 - English Flash BIOS Method Introduction Method 1: Dual BIOS /Q-Flash A . What is Dual BIOS T echnology? Dual BIOS means that there are two system BIOS (ROM) on the motherboard, one is the Main BIOS and the other is Backup BIOS.
- 54 - GA-8IPE775 Series Motherboard English b. A ward Dual BIOS Flash ROM Programming Utility c. Dual BIOS Item explanation: Wide Range Protection: Disable(Default), Enable Status 1: If any failure (ex.
T echnical Reference - 55 - English Auto Recovery : Enable(Default), Disable When one of the Main BIOS or Backup BIOS occurs checksum failure, the working BIOS will automatically recover the BIOS of checksum failure.
- 56 - GA-8IPE775 Series Motherboard English Q-Flash TM is a BIOS flash utility embedded in Flash ROM. With this utility, users only have to stay in the BIOS menu when they want to update BIOS. Q-Flash ™ allows users to flash BIOS without any utility in DOS or Windows.
T echnical Reference - 57 - English The BIOS file is Fa3 before updating Entering the Q-Flash TM utility: Step1: T o use Q-Flash utility, you must press Del in the boot screen to enter BIOS menu. Part One: Updating BIOS with Q-Flash TM Utility on Dual BIOS Motherboards.
- 58 - GA-8IPE775 Series Motherboard English Exploring the Q-Flash TM / Dual BIOS utility screen The Q-Flash / Dual BIOS utility screen consists of the following key components. Dual BIOS Utility Boot From......................................... Main Bios Main ROM Type/Size.
T echnical Reference - 59 - English Dual BIOS Utility Boot From......................................... Main Bios Main ROM Type/Size..................
- 60 - GA-8IPE775 Series Motherboard English Dual BIOS Utility Boot From......................................... Main Bios Main ROM Type/Size.........
T echnical Reference - 61 - English CMOS Setup Utility-Copyright (C) 1984-2003 Award Software ` Sta ndard CMOS Feature s ` Adva nced BIOS Feature s ` Integrated Peripherals ` Power Ma nagement Setup `.
- 62 - GA-8IPE775 Series Motherboard English Part T wo: Updating BIOS with Q-Flash TM Utility on Single-BIOS Motherboards. This part guides users of single-BIOS motherboards how to update BIOS using the Q-Flash ™ utility. Entering the Q-Flash TM utility: Step1: T o use the Q-Flash utility, you must press Del in the boot screen to enter BIOS menu.
T echnical Reference - 63 - English Steps: 1 . Press arrow buttons on your keyboard to move the light bar to "Update BIOS from Floppy" item in the Q-Flash menu and press Enter button. Later, you will see a box pop up showing the BIOS files you previously downloaded to the floppy disk.
- 64 - GA-8IPE775 Series Motherboard English The porcess of updating BIOS 4. Press any keys to return to the Q-Flash menu when the BIOS updating procedure is completed.
T echnical Reference - 65 - English Method 2: @ BIOS Utility If you don't have DOS boot disk, we recommend that you used Gigabyte @BIOS TM program to flash BIOS. Methods and steps: I. Update BIOS through Internet a. Click "Internet Update" icon b.
- 66 - GA-8IPE775 Series Motherboard English II. Update BIOS NOT through Internet: a. Do not click "Internet Update" icon b . Click "Update New BIOS" c . Please select "All Files" in dialog box while opening the old file.
T echnical Reference - 67 - English Stereo Speakers Connection and Settings: We recommend that you use the speaker with amplifier to acqiire the best sound effect if the stereo output is applied. STEP 1: Connect the stereo speakers or earphone to "Line Out".
- 68 - GA-8IPE775 Series Motherboard English 4 Channel Analog Audio Output Mode STEP 1 : Connect the front channels to "Line Out", the rear channels to "Line In". Line Out Line In STEP 2 : Following installation of the audio driver, you find a icon a Sound Effect icon on the lower right hand taskbar.
T echnical Reference - 69 - English Use the back audio panel to connect the audio out- put without any additional module. STEP 1 : Connect the front channels to "Line Out", the rear channels to "Line In", and the Center/Subwoofer channels to "MIC In".
- 70 - GA-8IPE775 Series Motherboard English STEP 1 : Secure the Audio Combo Kit at the panel on the back of the case. 8 Channel Audio Setup (using Audio Combo Kit, Optional Device): (Audio Combo Kit offers SPDIF output, an optical and coaxial cable and a Surround-Kit.
T echnical Reference - 71 - English STEP 4 : Following installation of the audio driver, you find a icon a Sound Effect icon on the lower right hand taskbar. Click the icon to select the function. STEP 5 : Click "Speaker Configuration" and select both the "UAJ Function" and "Only Surround-Kit".
- 72 - GA-8IPE775 Series Motherboard English S PDIF Output Device (Optional Device) 3. Connect SPDIF to the SPDIF decoder. 1 . Connect the SPDIF output device to the rear bracket of PC, and fix it with screw. 2. Connect SPDIF device to the motherboard.
T echnical Reference - 73 - English Jack-Sensing and UAJ Introduction Install Microsoft DirectX8.1 or later version before to enable Jack-Sensing support for Windows 98/98SE/2000/ME.
- 74 - GA-8IPE775 Series Motherboard English Manual setting: If the device picture shows different from what you set, please press "Manual Selection" to set. If you set wrong with the connectors, the warning message will come out as right picture.
T echnical Reference - 75 - English Xpress Recovery2 Introduction Xpress Recovery2 is designed to provide quick backup and restora- tion of hard disk data.
- 76 - GA-8IPE775 Series Motherboard English 1. RESTORE: Restore the backed-up data to your hard disk. (This button will not appear if there is no backup file.) 2. BACKUP: Back up data from hard disk. 3. REMOVE: Remove previously-created backup files to release disk space.
T echnical Reference - 77 - English.
- 78 - GA-8IPE775 Series Motherboard English.
Appendix - 79 - English Revision History Chapter 5 Appendix Pictures below are shown in Windows XP Insert the driver CD-title that came with your motherboard into your CD-ROM drive, the driver CD-title will auto start and show the installation guide.
- 80 - GA-8IPE775 Series Motherboard English Intel Chipset Software Installation Utility T ell the operating system how the chipset components will be configured. USB Patch for WinXP This patch driver can help you to resolve the USB device wake up S3 hang up issue in XP.
Appendix - 81 - English SOFTW ARE APPLICA TION This page reveals the value-added software developed by Gigabyte and its worldwide partners. Gigabyte Windows Utilities Manager(GWUM) This utility can integrate the Gigabyte's applications in the system tray.
- 82 - GA-8IPE775 Series Motherboard English SOFTW ARE INFORMA TION This page list the contects of softwares and drivers in this CD title. HARDW ARE INFORMA TION This page lists all device you have for this motherboard. CONT ACT US Please see the last page for details.
Appendix - 83 - English F AQ Below is a collection of general asked questions. T o check general asked questions based on a specific motherboard model, please log on to http://tw.giga-byte.com/faq/faq.htm Question 1: I cannot see some options that were included in previous BIOS after updating BIOS.
- 84 - GA-8IPE775 Series Motherboard English Question 7: Why cannot I use the IDE 2? Answer: Please refer to the user manual and check whether you have connected any cable that is not provided with the motherboard package to the USB Over Current pin in the Front USB Panel.
Appendix - 85 - English T roubleshooting If you encounter any trouble during boot up, please follow the troubleshooting procedures . T urn off the power and unplug the AC power cable, then remove all of the add-on cards and cables from motherboard. ST ART Failure has been excluded.
- 86 - GA-8IPE775 Series Motherboard English A Failure has been excluded. Ye s No Ye s No Failure has been excluded. Failure has been excluded. Ye s Reinstall Windows OS, and reinstall add-on cards and cables. Then try to reboot the system. Failure has been excluded.
Appendix - 87 - English T echnical Support/RMA Sheet Customer/Country: Company: Phone No.: Contact Person: E-mail Add. : Model name/Lot Number: PCB revision: BIOS version: O.
- 88 - GA-8IPE775 Series Motherboard English Acronyms Meaning ACPI Advanced Configuration and Power Interface APM Advanced Power Management AGP Accelerated Graphics Port AMR Audio Modem Riser ACR Adva.
Appendix - 89 - English Acronyms Meaning IOAPIC Input Output Advanced Programmable Input Controller ISA Industry Standard Architecture LAN Local Area Network I/O Input / Output LBA Logical Block Addre.
- 90 - GA-8IPE775 Series Motherboard English.
- 91 - English Memo Contact Us T aiwan (Headquarters) GIGA-BYTE TECHNOLOGY CO., L TD. Address: No.6, Bau Chiang Road, Hsin-Tien, T aipei 231, T aiwan TEL: +886-2-8912-4888 FAX: +886-2-8912-4003 T ech. Support : http://tw.giga-byte.
- 92 - GA-8IPE775 Series Motherboard English China NINGBO G.B.T . TECH. TRADING CO., L TD. T ech. Support : http://tw.giga-byte.com/T echSupport/ServiceCenter .htm Non-T ech. Support(Sales/Marketing) : http://ggts.gigabyte.com.tw/nontech.
Een belangrijk punt na aankoop van elk apparaat Gigabyte AGP 4X/8X (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Gigabyte AGP 4X/8X heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Gigabyte AGP 4X/8X vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Gigabyte AGP 4X/8X leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Gigabyte AGP 4X/8X krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Gigabyte AGP 4X/8X bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Gigabyte AGP 4X/8X kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Gigabyte AGP 4X/8X . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
