Gebruiksaanwijzing /service van het product MS4103 van de fabrikant Honeywell
Ga naar pagina of 268
Damper s, Actuator s and V alves Application And Selection Guide control your environment with honeywell DAmPerS, v Al veS AnD ActuA torS.
SUPPORT Contact Information Phone Fax Commercial Components T echnical Hotline 888-516-9347 Customer Care Order Entry 888-793-8193 800-356-0149 Product Dr op-Ship T eam 763-954-4140 800-356-0149 Butte.
3 T ABLE OF CONTENTS Section 1: DCA & Damper Selection Dampers ...................................................................................... 8 DCA ...........................................................................................
4 Section 3: Submittal Sheets (CONT .) MP958 ................................................................................ 104 Modutrol IV Motor M4185; M8185 ................................................................... 105 M6184; M6194 .....
5 Pneumatic V alve Actuator Parts and Accessories .................... 196 Foot Mounted Motor Accessories ............................................ 198 Damper and V alve Linkage Accessories ...................................200 Section 8: Competitive Cross Refer ence Direct Coupled Actuator .
6.
7 Section 1: DCA & Damper Selection Dampers ...................................................................................... 8 DCA ........................................................................................... 12 Fire and Smoke .
8 Use the following guidelines to determine the actuator quantity and torque r equirements for your damper configuration. Determine Damper Actuator Locations Use the following configuration to determine the amount of actuator locations your damper will requir e.
9 DCA & DAMPER SELECTION Damper Sizing Dam pers ca n b e si zed us ing two di ff er ent me tho ds; act ual siz ing and nominal sizing. When actual sizing is used the damper dim ensi ons wi ll b e t he same as th e si zes or de r ed.
10 Damper And Actuator Sizing 3-V Blades - D2 and D3 Dampers Ho ne yw e ll V ol um e Co n tr o l Da mp e rs feature a 3-V design that’ s proven to meet hi gher -lev el s yst em r eq uir em ents while minimizing flow-through system loss.
11 DCA & DAMPER SELECTION Damper And Actuator Sizing Standar d Round Dampers Custom Dampers Need a custom damper? Contact the T ake-Of f Service. Below is a sample list of the products we fr equently quote.
12 Dir ect Coupled Actuators • ML Non-Spring Retu rn • 61 Floating, 24 Va c • 71 Modulating, 24 Va c Input Signal T ype Fail Safe Mode ML 61 61 System Cont ro lled Numbers XXX 2 B • 1 Standard.
13 Power Supply Control Input/Output Order Specification Number Approximate Area of Damper (4.5 lb-in/sq. ft.) Running Time 24 V ac/dc 24 V ac V A Rating (Running) On/Off, Floating 0/2-10 Vdc 2-10 Vd.
14 Fir e & Smoke Actuators Honeywell’ s complete line of two-position, fast-acting spring- return actuators meet all of your needs for fire and smoke contr ol applications. All models are designed to meet the UL-555 and UL-555S high temperature r equirements for fir e dampers and com bine d fi r e an d s mok e da mpe rs.
15 V AL VE SELECTION Section 2: V alve Selection Control V alve Applications ......................................................... 17 Control V alve Selection Criteria .................................................. 18 2-W ay ..................
16.
17 Control V alve Applications Fan Coil/Zone Va lve Contr ol V alve Applications V AL VE SELECTION.
18 Contr ol V alve Selection Criteria 2-W ay Unitary Globe Fan Coil Cartridge Cage Cartridge Globe Threaded Flanged Attribute Specification VU52 VU53 VCzA/B V58x2 V5011N.
19 V AL VE SELECTION Globe Control Ball Butterfly Pressure-Balanced Threaded Flanged Resilient Seat Attribute Specification V5862A3 VGF2xP VBN2 VBF2 VFF1 VFF2 Pipe Size 1/2" [DN15] • 3/4".
20 Contr ol V alve Selection Criteria 3-W ay Unitary Globe Fan Coil Cartridge Cage Cartridge Globe Threaded Flanged Attribute Specification VU54 VCzM/N V58x3 V5863A3 V5013N.
21 Control Ball Butterfly Threaded Flanged Resilient Seat Attribute Specification VBN3 VBF3 VFF3 VFF6 Pipe Size 1/2" [DN15] • 3/4" [DN20] • 1" [DN25] • 1 1/4" [DN32] • 1 .
22 Actuator O.S. Number VU443A1008 VU443A1024 VU443A1115 VU443A1180 VU443E1009 VU444A1007 Power Supply Voltage 120 Vac 208 Vac 230 Vac 120 V ac 120 Vac 120 V ac Frequenc y 60 Hz 60 Hz 50 / 60 Hz 60 Hz 60 Hz 60 Hz Power (60 Hz) 5 VA 5 VA 5 VA 5 VA 5 VA 5 VA Control 2-P osition SPST •••••• Aux Switch SPST 2.
23 Actuator O.S. Number VU444A1098 VU444A1106 VU444A1155 VU843A1004 VU843A1087 VU844A1003 VU844A1060 Power Supply Voltage 227 Vac 230 V ac 120 V ac 24 Vac 24 Vac 24 V ac 24 V ac Frequenc y 60 Hz 50 / 60 Hz 60 Hz 50 / 60 Hz 50 / 60 Hz 50 / 60 Hz 50 / 60 Hz Power (60 Hz) 5 VA 5 VA 5 VA 0.
24 Cartridge Cage V alves Non-Fail Safe Actuator O.S. Number VC6834ZZ11 VC6934ZZ11 VC7934ZZ11 VC4011ZZ11 VC4013ZZ11 VC8114ZZ11 VC8714ZZ11 Power Supply Voltage 24 V ac 24 Vac 24 V ac 100-130 V ac 200-2.
25 Fail Safe Actuator O.S. Number VC6936ZZ11-530 VC7936ZZ11-529 Power Supply Voltage 24 V ac 24 V ac Frequenc y 50/60 Hz 50/60 Hz Power 12 VA 1 2 VA Control 2-10 Vdc • 4-20 mA (external 500 Ohm resi.
26 Cartridge Globe V alves Non-Fail Safe Actuator O.S. Number M6410A1029 M6410A3017 M7410F1000 M7410F3006 Power Supply Voltage 24 Vac 24 Vac 24 Vac 24 Vac Frequenc y 50/60 Hz 50/60 Hz 50/60 Hz 50/60 Hz Power 0.7 V A 0.7 VA 1.4 V A 1.4 V A Stem Force (lb.
27 Fail Safe Pneumatic Actuator O.S. Number M6435A1004 M6435A3000 M7435F1001 M7435F3007 MP958A1009 MP958A1017 MP958A1025 Power Supply Voltage 24 Vac 24 V ac 24 Vac 24 Vac Frequenc y 50/60 Hz 50/60 Hz 50/60 Hz 50/60 Hz Power 10 VA 1 0 VA 5 VA 5 VA Stem Force (lb.
28 Contr ol Ball V alves ½- 3" 2-W ay NPT NEMA 2 Actuator Features Non-fail Safe Actuator O.S. Number MN6105A1011 MN6105A1011 MN7505A2001 MN7505A2001 Power Supply Voltage 24 Vac 24 Vac 24 Vac 24 Vac Frequenc y 50 / 60 Hz 50 / 60 Hz 50 / 60 Hz 50 / 60 Hz Power 5 VA 5 VA 5 VA 5 VA Actuator T or que (lb.
29 Actuator Features Fail Safe Actuator O.S. Number MS8105A1030 MS8105A1030 MS7505A2030 MS7505A2030 Valve Only Valve Only Power Supply Voltage 24 Vac 24 Vac 24 Vac 24 Vac Frequenc y 50 / 60 Hz 50 / 60 Hz 50 / 60 Hz 50 / 60 Hz Power 8VA 8VA 7.5 VA 7.5 V A Actuator T or que (lb.
30 Contr ol Ball V alves ½- 3" 2-W ay NPT NEMA 3R Common Features • Max static pressur e 360 psi (250°F) • Medium: W ater/glycol solutions up to 50%. • T emperature range: -22 to +250°F • Field congurable open or closed fail-safe position • Removable handle for manual operation • ANSI class IV leakage (0.
31 Actuator Features Fail Safe Actuator O.S. Number MS8105A1030 MS8105A1030 MS7505A2030 MS7505A2030 Valve Only Valve Only Power Supply Voltage 24 Vac 24 Vac 24 Vac 24 Vac Frequenc y 50 / 60 Hz 50 / 60 Hz 50 / 60 Hz 50 / 60 Hz Power 8VA 8VA 7.5 VA 7.5 V A Actuator T or que (lb.
32 Contr ol Ball V alves ½- 2½" 3-W ay NPT NEMA 2 Actuator Features Non-fail Safe F ail Safe Actuator O.S. Number MN6105A1011 MN7505A2001 MS8105A1030 MS7505A2030 Valve Only Power Supply Voltage 24 Vac 24 Vac 24 V ac 24 Vac Frequenc y 50 / 60 Hz 50 / 60 Hz 50 / 60 Hz 50 / 60 Hz Power 5 VA 5 VA 8 VA 7.
33 Actuator Features Non-fail Safe Fail Safe Actuator O.S. Number MN6105A1011 MN7505A2001 MS8105A1030 MS7505A2030 V alve Only Power Supply Voltage 24 Vac 24 Vac 24 V ac 24 V ac Frequenc y 50 / 60 Hz 50 / 60 Hz 50 / 60 Hz 50 / 60 Hz Power 5 VA 5 VA 8 VA 7.
34 Flanged Contr ol Ball V alves 4"- 6" 2-W ay Flanged NEMA 2+3R Actuator Features Non-fail Safe Fail Safe V alve Only Actuator O.S. Number MN6110A1003 4 to 5 in. MN7510A2001 4 to 5 in. MS8110A1008 4 to 5 in. MS7510A2008 4 to 5 in. Valve Only MN6134A1003 6 in.
35 Actuator Features Non-fail Safe Fail Safe V alve Only Actuator O.S. Number MN6110A1003 4 to 5 in. MN7510A2001 4 to 5 in. MS8110A1008 4 to 5 in. MS7510A2008 4 to 5 in. Valve Only MN6134A1003 6 in. MN7234A2008 6 in. MS8120A1007 6 in. MS7520A2007 6 in.
36 NPT Globe V alves ½- 3" With Dedicated V alve Actuators For more than 50 years, Honeywell Globe V alves (V5011/13, VGF) have pr ovided precise contr ol for most applications. Globe valves provide the rangeability and close-off needed to keep tight contr ol of the environment.
37 Actuator Features Non-Fail Safe Fail Safe Actuator O.S. Number ML7421A1032 ML6421A1017 ML7425A3013 ML7425B3012 ML6425A3022 ML6425B3013 Power Supply Voltage 24 V ac 24 Vac 24 Vac 24 V ac 24 Vac 24 Vac Frequenc y 50 / 60 Hz 50 / 60 Hz 50 / 60 Hz 50 / 60 Hz 50 / 60 Hz 50 / 60 Hz Power 12 VA 11 VA 1 2 VA 1 2 VA 11 VA 1 1 VA Actuator Stem Force (lbs.
38 Common Features • ANSI body class 150 • Close-Off pr essure = maximum differ ential pressur e • Maximum static water pressur e (250°F): 240 psi • Maximum steam pressur e 2-way steam valves, 337°F: 100 psi 2-way water valves: 15 psi • Stem travel: 0.
39 Actuator Features Non-Fail Safe Actuator O.S. Number MN7510A2001 MN7510A2209 MN6110A1003 MN6110A1201 MN7220A2007 MN7220A2205 MN6120A1002 MN6120A1200 MN7234A2008 MN6134A1003 Power Supply Voltage 24 .
40 Actuator Features F ail Safe Actuator O.S. Number MS7505A2030 MS7505A2130 MS8105A1030 MS8105A1130 MS4105A1030 MS4105A1130 MS7510A2008 MS7510A2206 MS7510H2209 MS8110A1008 MS8110A1206 Power Supply Voltage 24 Vac 24 Vac 100-250 Vac 24 V ac 24 V ac Frequenc y 50 / 60 Hz 50 / 60 Hz 60 Hz 50 / 60 Hz 50 / 60 Hz Power 7.
41 Actuator Features F ail Safe Actuator O.S. Number MS4110A1002 MS4110A1200 MS7520A2007 MS7520A2205 MS7520H2208 MS8120A1007 MS8120A1205 MS4120A1001 MS4120A1209 Power Supply Voltage 100-250 Vac 24 Vac 24 Vac 100-250 Vac Frequenc y 60 Hz 50 / 60 Hz 50 / 60 Hz 60 Hz Power 45 VA 1 6 VA 40 VA 6 0 VA Actuator T or que (lb.
42 Flanged Globe V alves 2½- 3" With Direct Coupled Actuators and V alve Linkage Common Features • ANSI body class 125 or 250 • Close-off pr essure = Maximum dif ferential pr essure • Maxi.
43 Q5020A1003 Required Actuator Features Non-fail Safe Actuator O.S. Number MN7220A2007 MN6120A1002 MN7234A2008 MN6134A1003 Power Supply Voltage 24 V ac 24 Vac 24 Vac 24 V ac Frequenc y 50 / 60 Hz 50 / 60 Hz 50 / 60 Hz 50 / 60 Hz Power 6 VA 6 VA 9 VA 9 VA Actuator T or que (lb.
44 Flanged Globe V alves 2½- 3" With Direct Coupled Spring Return Actuators and V alve Linkage Common Features • ANSI body class 125 or 250 • Close-off pr essure = Maximum dif ferential pr e.
45 Q5020A1003 Required Actuator Features Fail Safe Actuator O.S. Number MS7520A2007 MS7520A2205 MS7520H2208 MS8120A1007 MS4120A1001 Power Supply Voltage 24 Vac 24 Vac 100-250 Vac Frequenc y 50 / 60 Hz 50 / 60 Hz 60 Hz Power 16 VA 4 0 VA 6 0 VA Actuator T or que (lb.
46 Thr eaded and Flanged Globe V alves 2"- 3" With T andem Direct Coupled Actuators and V alve Linkage Common Features • Stem travel: 0.75" • Rangeability: 50:1 • Body material: B.
47 Actuator Features Fail Safe Actuator O.S. Number (T wo required per linkage/v alve) MS7520A2007 MS7520A2205 MS8120A1007 MS4120A1001 Power Supply Voltage 24 Vac 24 Vac 100-250 Vac Frequenc y 60 Hz 60 Hz 60 Hz Power 16 VA 4 0 VA 60 VA Actuator T or que (lb.
48 Flanged Globe V alves 2½- 3" With Dedicated V alve Actuators Common Features • ANSI body class 125 or 250 • Close-off pr essure = Maximum dif ferential pr essure • Maximum static water .
49 Actuator Features Non-fail Safe Actuator O.S. Number ML6420A3049 ML6420A3056 ML7421A1032 ML6421A1017 Power Supply Voltage 24 Vac 24 Vac 24 V ac 24 Vac Frequenc y 50 / 60 Hz 50 / 60 Hz 50 / 60 Hz 50 / 60 Hz Power 6 VA 6 VA 1 2 VA 1 1 VA Actuator T or que (lb.
50 Flanged Globe V alves 2½- 3" With Dedicated V alve Actuators Common Features • ANSI body class 125 or 250 • Close-off pr essure = Maximum dif ferential pr essure • Maximum static water .
51 V AL VE SELECTION Notes & Numbers.
52 Flanged Globe V alves 4"- 6" With T andem Direct Coupled Actuators and V alve Linkage Common Features • Stem travel: 1.5" • Rangeability: 50:1 • Body material: Cast iron • Se.
53 Actuator Features Fail Safe Actuator O.S. Number (T wo Actuators per v alve/linkage) MS7520A2007 MS7520A2205 MS8120A1007 MS4120A1001 Power Supply Voltage 24 Vac 24 V ac 100-250 Vac Frequenc y 60 Hz 60 Hz 60 Hz Power 16 VA 4 0 VA 6 0 VA Actuator T or que (lb.
54 Actuator Features Non-fail Safe Actuator O.S. Number ML7421B1023 ML6421B1040 Power Supply Voltage 24 Vac 24 Vac Frequenc y 50 / 60 Hz 50 / 60 Hz Power 12 VA 1 1 VA Actuator T or que (lb.
55 Q5020C1009 Required Actuator Features Non-fail Safe Fail Safe Actuator O.S. Number MN6120A1002 MN6120A1200 MN7220A2007 MN7220A2205 MS7520A2007 MS7520A2205 MS7520H2208 MS8120A1007 MS8120A1205 MN4120.
56 NPT Globe V alves ½- 3" With Pneumatic Actuators Common Features • Rolling diaphragm for long life and low hysteresis • Easily installation and attachment to the valve • Direct or r everse acting • No positive positioner Actuator Features Without Positive P ositioner Actuator O.
57 SPRING RANGE PSI (kPa) L - LOWER SEAT U - UPPER SEAT ACTUATOR AIR PRESSURE IN PSI (kPa) 4-11 (30-75) 11 (75) 12 (85) 13 (90) 14 (95) 15 (105) 16 (110) 17 (115) 18 (125) 4 (30) 3 (20) 2 (15) 1 (5) 0.
58 NPT Globe V alves ½- 3" With Pneumatic Actuators Common Features • Rolling diaphragm for long life and low hysteresis • Easily installation and attachment to the valve • Direct or r everse acting • Integrated positive positioner Actuator Features With Positive P ositioner Actuator O.
59 Chart C 8 (55) 7 (50) 6 (40) 5 (35) 4 (30) 3 (20) 2 (15) 1 (10) 0 (0) 4 (30) 3 (20) 2 (15) 1 (10) 0 (0) 3 (20) 2 (15) 1 (10) 0 (0) 0 (0) 10 (70) 20 (140) 30 (205) 40 (275) 60 (515) 70 (480) 50 (345.
60 Flanged Globe V alves 2½- 3" With Pneumatic Actuators Common Features • Rolling diaphragm for long life and low hysteresis • Easily installation and attachment to the valve • Direct or r everse acting • No positive positioner Actuator Features Without Positive P ositioner Actuator O.
61 Chart L 12 (83) 13 (90) 14 (96) 15 (103) 16 (110) 17 (117) 18 (124) 19 (131) 20 (138) 21 (144) 22 (152) 23 (159) 24 (165) 25 (172) 12 (83) 11 (76) 13 (90) 14 (96) 15 (103) 16 (110) 17 (117) 18 (124.
62 Flanged Globe V alves 2½- 3" With Pneumatic Actuators Common Features • Rolling diaphragm for long life and low hysteresis • Easily installation and attachment to the valve • Direct or r everse acting • Integrated positive positioner Actuator Features With P ositive Positioner Actuator O.
63 Chart L 12 (83) 13 (90) 14 (96) 15 (103) 16 (110) 17 (117) 18 (124) 19 (131) 20 (138) 21 (144) 22 (152) 23 (159) 24 (165) 25 (172) 12 (83) 11 (76) 13 (90) 14 (96) 15 (103) 16 (110) 17 (117) 18 (124.
64 Actuator Features Without Positive Positioner With Positive Positioner Actuator .S. Number MP953C1471 MP953C1489 MP953C1547 MP953E1285 MP953E1400 MP953E1418 Diaphragm 13" 13" 8" 8&qu.
65 12 (85) 11 (75) 13 (90) 14 (95) 15 (105) 16 (1 10) 17 (120) 18 (125) 12 (85) 11 (75) 13 (90) 14 (95) 15 (105) 7 (50) 8 (55) 9 (60) 10 (70) 0 (0) 10 (70) 20 (140) 30 (205) 40 (275) 60 (515) 50 (345) 2-7 (15-50) 4-1 1 (30-75) SPRING RANGE PSI (kPa) V501 1A — 4, 5 AND 6 IN.
66 Honeywell Resilient Seat Butterfly V alves family (VFF) of fers options in sizes 2" to 20", highlighted with an industry unique tandem mount using Honeywell direct coupled actuators on valves up to 8" size.
67 Actuator Features Fail Safe Valve Only End-of-line Service 2-Position Modulating Actuator O.S. Number MS8120A1007 MS4120A1001 MS7520A2007 NEMA 2 NEMA 4X NEMA 6 Power Supply Voltage 24 Vac 100-250 Vac 24 Vac Frequenc y 60 Hz 60 Hz 50 / 60 Hz Power (* tandem mount) 40 / 80* V A 60 / 120* V A 16 / 32* V A Actuator T or que lb.
68 Actuator Features Non-fail Safe Floating Modulating Actuator O.S. Number MN6134A1003 Industrial Actuators MN7234A2008 Industrial Actuators NEMA 2 NEMA 4X NEMA 4 NEMA 2 NEMA 4X NEMA 4 Power Supply V.
69 Actuator Features Fail Safe Valve Only End-of-line Service 2-Position Modulating Actuator O.S. Number MS8120A1007 MS4120A1001 MS7520A2007 NEMA 2 NEMA 2 NEMA 2 Power Supply Voltage 24 Vac 100-250 Vac 24 Vac Frequenc y 60 Hz 60 Hz 50 / 60 Hz Power (* tandem mount) 40 / 80* V A 60 / 120* V A 16 / 32* V A Actuator T or que lb.
70 Actuator Features Non-fail Safe Floating Modulating Actuator O.S. Number MN6134A1003 Industrial Actuators MN7234A2008 Industrial Actuators NEMA 2 NEMA 4X NEMA 4 NEMA 2 NEMA 4X NEMA 4 Power Supply V.
71 Actuator Features Fail Safe Valve Only End-of-line Service 2-Position Modulating Actuator O.S. Number MS8120A1007 MS4120A1001 MS7520A2007 NEMA 2 NEMA 2 NEMA 2 Power Supply Voltage 24 Vac 100-250 Vac 24 Vac Frequenc y 60 Hz 60 Hz 50 / 60 Hz Power (* tandem mount) 40 / 80* V A 60 / 120* V A 16 / 32* V A Actuator T or que lb.
72 Common Features Honeywell offers a wide selection of pneumatic actuators: • 20 psi spring return (up to 10" size) • 80 psi spring return • 80 psi double acting bi-directional Resilient S.
73 Actuator Features Fail Safe Actuator 20 psi Actuator 80 psi Actuator 8-13 spring Positioner Standard E-P Solenoid E-P Solenoid Positioner E-P Positioner Power Supply Voltage 24 V ac 120 Vac 24 Vac .
74 Actuator Features Non-fail Safe (Bidirectional) Actuator 80 psi Actuator Standard E-P Solenoid E-P Solenoid Positioner E-P Positioner Power Supply Voltage 24 V ac 120 V Ac 24 V ac Frequenc y 50 / 6.
75 Actuator Features Fail Safe Actuator 20 psi Actuator 80 psi Actuator 8-13 spring Positioner Standard E-P Solenoid E-P Solenoid Positioner E-P Positioner Power Supply Voltage 24 V ac 120 Vac 24 Vac .
76.
77 Section 3: Submittal Sheets Rectangular V olume Contr ol Dampers D1 Series ............................................................................. 78 D2 and D3 Series .................................................................. 79 Round V olume Contr ol Dampers D690 .
78 Rectangular V olume Contr ol Dampers D1 Series D1 Ser ies The D1 series is an extremely low leakage da mper with ru gged steel airfoil blades designed to meet the highest standards established. It is intended for application in medium to high pressure and velocity ratings.
79 D2 and D3 Ser ies D2 series is an ult ra-low l eakage control damper which includes blade and jamb seals. The D3 series is a ge neral purp ose damper intended for applic ations w here low leakage per formance is not necessary . SPECIFICATIONS Size Ra nge 1 Minimum Size One Blade .
80 Round V olume Contr ol Dampers D690 D690 The D690 Round Damper is used in conventional air handling systems to control airflow in a round duct. The damper is designed for use with Honeywell ML6161 an d ML7161 Direct Coupled Actuators. SPECIFICATIONS Application .
81 SUBMITT AL SHEETS DM7600 The DM7600 Co mmercial Zone Damper is used in zoning systems to control airflow in a round duct. A Honeywell ML6161 or ML71 61 Direct Coupled Actuator is factory mounted to the damper to simplify field installation. SPECIFICATIONS Application .
82 S03 Ser ies (MS4103; MS7403; MS7503; MS8103) MS4103, MS7403, MS7503, MS8103 Spring Retur n Direct Coupled Actuators (DCA) ar e used within heating, ventilating, and air- conditioning (HV AC) systems. They can drive a variety of quarter -turn, final control elements requiring spring re turn fail-safe operation.
83 S05 Series (MS4105; MS7105; MS7405; MS7505; MS8105) MS4105, MS7405, MS7505, MS8105 Spring Retur n Direct Coupled Actuators (DCA ) are used within heating, ventilating, and air - conditioning (HV AC) systems. They can drive a variety of qu arter -turn, final control elements requiring spring return fail-safe operation.
84 S10 Series (MS4110; MS7510; MS8110) MS4110, MS7510, MS8110 S10 Series Spring Return Direct Coupled Actuators (DCA) ar e used within heating, ventilating, and air- conditioning (HV AC) systems. They can drive a variety of quarter -turn, final control elements requiring spring re turn fail-safe operation.
85 S20 Series (MS4120; MS7520; MS8120) MS4120, MS7520, MS8120 Spring Return Direct Coupled Actuators (DCA) are used within heatin g, ventilating, and air -conditioning (HV AC) systems. They can drive a variety of quar ter -tur n, final control elements requiring spring return fail-safe operation.
86 ML4125; ML8125 The ML8125 Fast-Acting, T wo- Position Actuators are spring r eturn direct coupled actuators (DCA) with an integral ju nction box for on/off damper contr ol. SPECIFICATIONS Actuator T ype ....................................... Damper Rotational Stroke .
87 ML4135; ML8135 The ML8135 Fast-Acting, T wo- Position Actuators are spring r eturn direct coupled actuators (DCA) with an integral ju nction box for on/ off damper contr ol. SPECIFICATIONS Actuator T ype ....................................... Damper Rotational Stroke .
88 ML6161; ML7161 Used to control dampers in applications such as variable air volume (V A V ) terminal units and for mounting on ball valves; suitable for use with SPDT or floa ting thermosta ts or building automation controls. SPECIFICATIONS Actuator T ype .
89 Non-Spring Retur n Dir ect Coupled Actuator ML6174; ML7174 SUBMITT AL SHEETS ML6174; ML7174 Used to control dampers in applications such as variable ai r volume (V A V) termina l units and for mounting on ball valves; suit able for use with SPDT or floating ther mostats or buildi ng automati on controls.
90 N05 Series (MN6105; MN7505) This non-spring return direct- coupled damper actua tor provides modulating and fl oating/2-position control for: air dampers, V A V units, air handlers, ventilati on flaps, louvers, and rel iable control for air damper applicatio ns with up to 10 sq.
91 Non-Spring Retur n Dir ect Coupled Actuator N10 Series (MN6110; MN7510) SUBMITT AL SHEETS N10 Series (MN6110; MN7510) This non-spring return direct- coupled damper actua tor provides modulating and.
92 N20 Series (MN6120; MN7220) These direct-coupled damper actuators provide adjustable modulating control for: air dampers, V A V units, air handling units, ven tilation flaps, louvers, and reliable control for air damper applica tions wit h up to 4.
93 Non-Spring Retur n Dir ect Coupled Actuator N34 Series (MN6134; MN7234) SUBMITT AL SHEETS N34 Series (MN6134; MN7234) These direct coupled damper actuators provide adjustable modulating control for air dampers, V A V units, air handling units, ventilation flaps, louvers, and reliable control for air damper applications with up to 7.
94 ML4115; ML8115 Spring return direct coupled actuators (DCA) for on/o f f damper control with an integral junction box. The actuator accepts an on/off signal from a single-pole, single- throw (SPST) controller . They are designed to operate reliably in smoke control syste ms requiring Underwriter's Laboratories Inc.
95 Fir e And Smoke Actuator MS4209F; MS4309F; MS4709F; MS4809F; MS8209F; MS8309F SUBMITT AL SHEETS MS4209F; MS4309F; MS4709F; MS4809F; MS8209F; MS8309F Spring return direct coupled actuators (DC A) for on/off damper control with an integral junction box.
96 MS4120F; MS4620F; MS8120F Spring return direct coupled actuators (DC A) for on/off damper control with an integral junction box. The actuator accepts an on/of f signal from a single-pole, si ngle- throw (SPST) contr oller . They are designed to ope rate reliably in smoke control systems requiring Underwriter's Laboratories Inc.
97 Pneumatic Damper Actuator MP909D SUBMITT AL SHEETS MP909D Used for pneumatic proportional control of variable volume ter minal units and small dampers. A vailable in various operating ranges for either individual or sequence operation with other actu ators.
98 MP909E,H These actuators are used for proportional control of variable volume terminal units, mixing boxes, and small to medium sized dampers. They are available in various operating ranges for either independen t operation or sequence operation with other actuators.
99 SUBMITT AL SHEETS Pneumatic Damper Actuator MP913 MP913 Provides pr oporti onal control of variable volume dampers in small high velocity mixing boxes. Replacement devices ar e available for Johnson and Robertshaw devices. Suita ble for direct replacement only , do not attempt to replace larger damper actuators with this unit.
100 MP918A,B Used for proportional con trol of medium- to large-size dampers in HV AC systems. The MP918A,B are rolling diaphragm, piston-type actuators. The MP918A has a positive positio ner . Replacement devices ar e available for Johnson, Powers, Robertshaw , Barber - Colman, and older Honeywell actuator models.
101 SUBMITT AL SHEETS Pneumatic Damper Actuator MP920 MP920 Provides pr oporti onal control of large dampers in HV AC systems or inlet vanes on a V A V fan. Positive positioner ava ilable separately . Replacement devices ar e available for Rober tshaw actua tor models.
102 MP953C ,D Pneumatic actu ators provide proportional control of steam or hot or cold liquids in HV AC systems by operating V5011, V5013, and VGF valve assemblies. Replacement devices are available for older Honeywell actuators. SPECIFICATIONS Actuator T ype .
103 SUBMITT AL SHEETS Pneumatic V alve Actuator MP953E,F MP953E,F Pneumatic actu ators provide proportional control of steam or hot or cold liquids in HV AC systems by operating V5011, V5013, and VGF valve assemblies. Replacement devices are available for older Honeywell actuators.
104 MP958 The MP958 Pneumati c V alve Actuator is direct-acting and used only with Honeywell V5852A2xx, V5862A2xx, V5853A2xx, and V5863A2xx T er minal Unit V alves to control hot and/or chilled water . SPECIFICATIONS Actuator T ype ...................
105 SUBMITT AL SHEETS Modutr ol IV Motor M4185; M8185 M4185; M8185 Series 4 1 and Series 81 Modut rol IV motors are 2-position (line- and low-voltage per moto r control) spring-return motors.
106 M6184; M6194 Series 61 Modutrol IV™ Motors non-spring return floating control motors used with controllers that provide a switched SPDT or floating output to operate dampers or valves. SPECIFICATIONS Application T ype ...........................
107 SUBMITT AL SHEETS Modutr ol IV Motor M6285 for slaving applications M6285 f or sla ving applicatio ns Series 62 Modutrol IV™ Motors are spring retur n flo ating control motors used with contr ollers that pr ovide a switched SPDT or floating output to operate dampers or valves.
108 M6284; M6294 f or sl aving applications These Series 62 Modutrol IV™ Motors non-spring return flo ating control motors ar e used with controllers that provide a switched SPDT or floating output to operate dampers or valves.
109 SUBMITT AL SHEETS Modutr ol IV Motor M6274; M6284; M6285; M6294 Motors with Linear 10K Feedback M6274; M6284; M6285; M6294 Moto rs with Linear 10K F eedbac k Series 62 Modutrol IV™ Motors spring.
110 M7164 Series 71 Modutr ol IV™ Motors non-spring retur n motors used to control dampers and valves. These motors accept a voltage signa l from an electronic controller to position a damper or valve at any point between open a nd closed. SPECIFICATIONS Application T ype .
111 SUBMITT AL SHEETS Modutr ol IV Motor M7274; M7284; M7285; M7286; M7294 M7274; M7284; M728 5; M7286; M7294 The Series 72 Modutrol IV Motors spring return and non-spring return motors are used to contr ol dampers and valves.
112 M9164; M9174; M 9182; M9184; M9194 Series 90 Modutrol IV™ Motors non-spring return modulating proportional control motors use d with controllers that provide a Series 90 output to operate dampers or valves. SPECIFICA TIO NS Application T ype ...
113 SUBMITT AL SHEETS Modutr ol IV Motor M9175; M9185; M9186 M9175; M9185; M91 86 Series 90 Modutrol™ IV Motors spring re turn modulating proportional control motors use d with controllers that provide a Series 90 output to operate dampers or valves.
114 Q7130; Q7230; Q7330 For conver ting Series 90 Modutrol I V motors to Series 70 (electronic) control. SPECIFICATIONS Application T ype .................................. Damper Dimensions, Approxim ate .................... Fits inside wiring junction box of Modutrol IV Motor Control Signal .
115 SUBMITT AL SHEETS Unitary V alve Actuator VU443, VU444; VU843; VU844 VU443, VU444; VU843; VU844 The VU844 Fa n Coil V alve Actuators are used in conjunction with the VU52, VU53 and VU54 valves for controlling the flow of hot or chilled water in commercial HV AC equipmen t such as fan c oil units, terminal reheat coils and convectors.
116 VC Series T wo-position Actuators Control central heating and/or cooling systems, fan coil systems, radiators and convectors. Depending on the mode l selected, it can be controlled by either a low or line voltage SPST controller such as a room thermo stat.
117 Unitary V alve Actuator VC Series Proportional Actuators SUBMITT AL SHEETS VC Series Propor tional Actuators Control central heating and/or cooling systems, fan coil systems, radiators and convectors.
118 VC Series F ail Saf e Propor tional Actuators Control central heating and/or cooling systems, fan coil systems, radiators and convectors. Depending on the mode l selected, it can be controlled by .
119 Unitary V alve Actuator M6410; M7410 SUBMITT AL SHEETS M6410; M7410 Cartridge Globe V alve Actuator are small electric actuators for individual r oom control that pr ovide floating or modulating c ontrol of V5852, V5862 two-way or V5853, V5863 three-way valves.
120 M6435; M7435 Cartri dge Globe V alve Spring Return Ac tuators are small electric actuators for individual room control that provide floating or modulating control of 1/2 and 3/4 in. V5852, V5862 two-way or V5853, V5863 three-way valves. SPECIFICATIONS Actuator T ype .
121 Dir ect Coupled V alve Actuator ML6420; ML7420 SUBMITT AL SHEETS ML6420; ML7420 Direct C oupled Globe V al ve Actuators pr ovide floating or modulating control of chilled water , hot water , or steam, and mount directly on VGF series, V5011, and V5013 globe valves from 1/2 to 3 in.
122 ML6421; ML7421 Direct C oupled Globe V al ve Actuators pr ovide floating or modulating control of chilled water , hot water , or steam, and mount directly on VGF series, V5011, and V5013 valves. These Non-Spring Return Actuators will operate 1/2 to 6 in.
123 SUBMITT AL SHEETS Dir ect Coupled V alve Actuator ML6425; ML7425 ML6425; ML7425 Direct C oupled Globe V al ve Actuators pr ovide floating and modulating control of chilled water , hot water , and steam, and mount directly on VGF series, V5011, and V5013 globe valves.
124 ML6984 The ML6984 is a self-conta ined, self-adjusting, motorized linkage that mounts di rectly onto V5011 two-way or V5013 three-way valves and pr ovides up to 25 mm (1 in.
125 SUBMITT AL SHEETS Dir ect Coupled V alve Actuator ML7984 ML7984 The ML7984 is a self-co ntained, self- adjusting, motorized linkage that mounts directly onto V5011 two-way or V5013 three-way valves and pr ovides up to 25 mm (1 in.) of linear stem travel .
126 Unitary V alve VU52; VU53 VU52; VU53 T wo-way Fan Coil V a lves, the VU53 high pr essur e zone valves are used to control the flow of hot or chilled water in commercial HV AC equipment such as fan coil un its, terminal reheat coils and convectors.
127 SUBMITT AL SHEETS Unitary V alve VU54 VU54 Three-way Fan Coil V alve, the VU54 high pr essur e zone valves ar e used to control the flow of hot or chilled water in commercial HV AC equipment such as fan coil un its, termin al reheat coils and convectors.
128 VCZA; VCZB T wo-way Car tridge Cage V alves are intended fo r hydronic applications in a nor mal indoor environment to control the flow of hot water or chilled water glycol solution to 60% con centration.
129 SUBMITT AL SHEETS Unitary V alve VCZM; VCZN VCZM; VCZN Three-way Cartridge Cage V alves are intended for hydronic applications in a nor mal indoor environment to control the flow of hot water or chilled water glycol solution to 60% con centration.
130 V5852; V5862 T wo-way Car tridge Globe V a lves control hot and/or chilled water for V A V terminal units, fan coil units, small reheaters and r ecoolers in electric/elec tronic temperature control systems.
131 SUBMITT AL SHEETS Unitary V alve V5853; V5863 V5853; V5863 Three-way Cart ridge Globe V alves control hot and/or chilled water for V A V terminal units, fan coil units, small reheaters and recoolers in electric/ electronic temperature control systems.
132 VBN2 The VBN2 T wo-Way Control Ball V alves control hot and chilled water with glycol soluti ons up to 50% in heating, ventilati ng, and air conditionin g (HV AC) systems to provide two-position or modulating functions.
133 SUBMITT AL SHEETS VBN3 The VBN3 Three-W ay Control Ball V alves control hot and chilled water with glycol soluti ons up to 50% in heating, ventilati ng, and air conditioning (HV AC) systems to provide two-position or modulating functions.
134 VBF2 The VBF2 T wo-Way Ball V a lve Assemblies, with and witho ut actuators, con trol hot and chilled water with glycol soluti ons up to 50% in heating, ventilating, and air conditioning (H V AC) systems to provide two-position or modulating functions.
135 SUBMITT AL SHEETS VBF3 The VBF3 Three-W ay Ball V alve Assemblies, with and without actuators, control hot and chilled water with glycol sol utions up to 50% in heating, ventilating, and air conditioning (HV AC) systems to provide two-positi on or modulating functions.
136 V5011F ,G Used for two-position or modulating control of steam and water and glycol solutions (to 50 percent concentration) in heating or coolin g systems. SPECIFICATIONS V alve T ype ............................................ Globe V alve Body Pattern .
137 V5011N Used for two-position or modulating control of steam and water and glycol solutions (to 50 percent concentration) in heating or cooling systems. SPECIFICATIONS V alve T ype ............................................ Globe V alve Body Pattern .
138 V5013N The V5013N is a thre e-way threaded globe valve that controls hot water , cold water , and glycol solutions (up to 50 percent concentration) in heating or cooling HV AC applications. The valves are us ed for mixing service to direct flow from one or two inlets to a common outlet in tw o-position or modulating control systems.
139 V5051A Single-Seated Ca ge V a lves control steam, air , liquids, or non- combustible gases in two-position , proportional, or floati ng control systems where line isolation is not required. SPECIFICATIONS V alve T ype ............................
140 V5011A,B Used for proportional control of hot or chilled water and glycol solutions (to 50 percent concentration) and for two-position control of low pr essure steam. SPECIFICATIONS V alve T ype ............................................ Globe V alve Body Pattern .
141 V5013B ,C The V5013B are three-way mixing valves. The V5013C ar e three-wa y diverting valves. These valves provide proportional or two-position control of hot or chilled water in heating or cooling systems. These valves are offere d in sizes 2 1/2 in.
142 V GF2 VGF Flanged Globe V alves are used for 2-position or modulating control of steam, hot water , or chilled water -glycol solutions up to 50 percent concentration in heating, ventilati on and air conditioning (HV AC) systems.
143 V GF2 Pressure Balanced VGF Flanged Globe Valves ar e used for 2-position or modulating control of steam, hot water , or chilled water -glycol solutions up to 50 percent concentration in heating, ventilati on and air conditioning (HV AC) systems.
144 VG F 3 VGF Flanged Globe V alves are used for 2-position or modulating control of hot water or chilled water - glycol soluti ons up to 50 percent concentration in heating, ventilation and air conditioning (HV AC) systems.
145 VFF1 Resilient seat in two-way valves, provide contr ol for HV AC system applications i ncluding chil led water , hot water , cooling tower w ater , thermal storage systems, and steam. SPECIFICATIONS Body Pattern ..................................
146 VFF2 Resilient seat two-way valves provide contro l for HV AC sy stem applications includi ng chilled water , hot water , cooling tower water , thermal storage systems, and steam. SPECIFICATIONS Body Pattern .......................................
147 VFF3 Resilient seat three-way valves provide contr ol for HV AC system applications includi ng chilled water , hot water , cooling tower water , thermal storage systems, and steam. SPECIFICATIONS Body Pattern ......................................
148 VFF6 Resilient seat three-way valves provide contro l for HV AC sy stem applications includi ng chilled water , hot water , cooling tower water , thermal storage systems, and steam. SPECIFICATIONS Body Pattern .. ..................................
149 SUBMITT AL SHEETS Q605 Use the Q605 linkage kit to connect Modutrol® motor to standard damper or set of dampers to provide control of duct airflow . SPECIFICATIONS Linkage T ype ........................................ Damper Mounting ...........
150 Q5001 The Q5001 V al ve Linkage connects a Modutrol® Motor to a 2- or 3-way valve. It is used primarily on V5 011 or V5013 steam and water valves. SPECIFICATIONS Linkage T ype ........................................ V alve Mounting .............
151 SUBMITT AL SHEETS Q5020 The Q5020 Globe V alve Linkages connect a Honeywell di rect coupled actuator (DCA) to a steam or wate r globe valve. The Q5020 Linkages ar e compatible wi th two-way and three- way globe valves up to 3 in. (DN80). SPECIFICATIONS Linkage T ype .
152 Q5022 The Q5022A,B Globe V alve Linkages connect one or two Hone ywell direct coupled rotary actuators (DCA) to a globe valve for control of chilled water , hot water , or steam. The Q5022A,B Linkages are compatible with 2 and 3-way globe valves up to 6 in.
153 Direct Coupled Actuators - Spring Retur n Models Wiring for (0)2-10 Vdc propor tioning controller operati ng multiple actua tors Wiring for 3 kOhm Economizer controllers Wiring for 3 position Econ.
154 Direct Coupled Actuators - Spring Retur n Models S03 Series (MS4103, MS 7403, MS7503, MS8103) and S05 Series (MS4105, MS7105, MS7405, MS7505, MS8105) Wiring for low-vo ltage two-position control W.
155 Direct Coupled Actuators - Spring Retur n Models Wiring for (0)2-10 Vdc propor tioning controller operati ng multiple actua tors Wiring for 3 kOhm Economizer controllers Wiring for 3 position Econ.
156 Direct Coupled Actuators - Spring Retur n Models S10 Series (MS4110, MS7510 , MS8110) and S20 Ser ies (MS4120, MS 7520, MS8120) Wiring f or On/Of f Contr ol Wiring f or Floating Contr ol (Floatin g mode setting) Wiring for Proportioni ng controllers (Modulating mode setting) ACTUATOR SPST 24 VAC 1 1 2 2 LINE VOLTAGE POWER SUPPLY.
157 Direct Coupled Actuators - Spring Retur n Models Override to full open (Modulating mode setting) Override to full closed (Modulating mode setting) Wiring f or Prop ortioning controller s operating.
158 Direct Coupled Actuators - Spring Retur n Models ML4125, ML8125, ML4135, and ML8135 T y pical 24 V ac wiring T ypical 120 V a c Wiring T ypical 230 V ac Wiring L1 24 V AC L2 RED BLACK M17585A ( ) .
159 Direct Coupled Actuators - Non-Spring Retur n Models ML6161 and ML7161 ML7161 used with 4-20 mA control ML7161 used with 2-10 Vdc control ML6174 and ML7174 ML7174 used with 4-20 mA control ML7174 used with 2-10 Vdc control L1 (HOT) L2 1 1 POWER SUPPL Y .
160 Direct Coupled Actuators - Non-Spring Retur n Models N05 Series (MN6105, MN7505) and N10 Ser ies (MN6110, MN7510) Wiring for Fl oating Contro l Wiring f or V oltage Control Wiring for A uxiliary Switches FLOATING: DIR 24 V AC 1 1 2 2 LINE VOL T AGE POWER SUPPLY .
161 Direct Coupled Actuators - Non-Spring Retur n Models N20 Series (MN6120, MN7220) and N34 Ser ies (MN6134, MN7234) Used fo r On/Off Contr ol Wiring for Modulating Contr ol Wiring f or Floating Cont ro l Wiring for A uxiliary S witches 4 3 2 FLOATING ACTUATOR 24 VAC 1 1 POWER SUPPLY.
162 Direct Coupled Actuators - Smok e and Fire Actuators ML4115, ML8115, MS4209F , MS4309F , MS4709F , MS4809F , MS8209F , and MS8309F T y pical 24 V ac wiring T ypical 120 V ac wiring T ypical 230 V .
163 F oot Mounted Motors M4185 and M8185 T y pical connections for Series 41 motors T ypical connections for Series 81 motors M6184 and M6194 T y pical wiring f or Seri es 61 motors M6284, M6285, an d.
164 F oot Mounted Motors M6274, M6284, M6285, and M6294 Motors wit h Linear 10K F eedbac k T y pical wiring f or Seri es 62 motors M7164, M7284, M7285, M7286, and M7294 T y pical wiring f or Seri es 70 motors M7685 T ypical wiring for M7685 motors R B W R 1 2 T G Y 4 3 L1 (HOT) L2 POWER SUPPLY.
165 F oot Mounted Motors M9161, M9164, M9171, M9172, M9174, M9175, M9181, M9182, M9184, M9185, M9186, and M9194 T y pical wiring f or Seri es 90 motors Wiring for Po tentiometer Control L1 (HOT) L2 1 1 2 R W B R W B T1 T2 TRANSFORMER POWER SUPPL Y . PROVIDE DISCONNECT MEANS AND OVERLOAD PROTECTION AS REQUIRED.
166 Actuators with Butterfly V alves VFF2, VFF3, and VFF6 T ypical Non-Spring Return Floating Control Actuator wiring T ypical Spring Return Floa ting/Modulating c ontrol wiring T ypical Non-Spring Return 12 0 V ac Floating control wiring 4 3 2 FLOATING ACTUATOR 24 VAC 1 1 POWER SUPPLY.
167 Actuators with Butterfly V alves T ypical Non-Spring Return 12 0 V ac Floating control wiring T ypical Non-Spring Return Modulating contr ol wiring T ypical Spring Retu rn 2-P ositio n, 24 V ac wiring FIELD WIRING A UX SPDT SWITCH/LS3 (VOL T AGE FREE) AUX SPDT SWITCH/LS4 (VOL T AGE FREE) ACTUA T OR COM N.
168.
169 GUIDE SPECIFICA TIONS Section 5: Gui de Sp ec ific at ion s Guide Specifications ..............................................................170.
170 Guide Specifications Threaded Globe V alves 23 00 00 HEA TING, VENTILA TING, AND AIR-CONDITIONING (HV AC) 23 09 00 Instrumentation and Control for HV AC 23 09 13 Instrumentation and Control Devices for HV AC 23 09 13.33 Control V alves Threaded Globe V alves Moun tin g 1.
171 GUIDE SPECIFICA TIONS 23 00 00 HEA TING, VENTILA TING, AND AIR-CONDITIONING (HV AC) 23 09 00 Instrumentation and Control for HV AC 23 09 13 Instrumentation and Control Devices for HV AC 23 09 13.33 Control V alves Pressur e-Balanced Flanged Globe V alves Moun tin g 1.
172 23 00 00 HEA TING, VENTILA TING, AND AIR-CONDITIONING (HV AC) 23 09 00 Instrumentation and Control for HV AC 23 09 13 Instrumentation and Control Devices for HV AC 23 09 13.
173 GUIDE SPECIFICA TIONS 23 00 00 HEA TING, VENTILA TING, AND AIR-CONDITIONING (HV AC) 23 09 00 Instrumentation and Control for HV AC 23 09 13 Instrumentation and Control Devices for HV AC 23 09 13.33 Control V alves Threaded Contr ol Ball V alves and Actuators Mounting and Wiring 1.
174 23 00 00 HEA TING, VENTILA TING, AND AIR-CONDITIONING (HV AC) 23 09 00 Instrumentation and Control for HV AC 23 09 13 Instrumentation and Control Devices for HV AC 23 09 13.33 Control V alves Control Ball V alves and Actuators Mounting and Wiring 1.
175 GUIDE SPECIFICA TIONS 23 00 00 HEA TING, VENTILA TING, AND AIR-CONDITIONING (HV AC) 23 09 00 Instrumentation and Control for HV AC 23 09 13 Instrumentation and Control Devices for HV AC 23 09 13.33 Control V alves Flanged Butterfly V alves and Actuators Mounting and Wiring 1.
176 23 00 00 HEA TING, VENTILA TING, AND AIR-CONDITIONING (HV AC) 23 09 00 Instrumentation and Control for HV AC 23 09 13 Instrumentation and Control Devices for HV AC 23 09 13.33 Control V alves Fan Coil Zone V alves and Dedicated Actuators Mounting and Wiring 1.
177 GUIDE SPECIFICA TIONS 23 00 00 HEA TING, VENTILA TING, AND AIR-CONDITIONING (HV AC) 23 09 00 Instrumentation and Control for HV AC 23 09 13 Instrumentation and Control Devices for HV AC 23 09 13.33 Control V alves Cartridge Cage V alves and Dedicated Actuators Mounting and Wiring 1.
178 23 00 00 HEA TING, VENTILA TING, AND AIR-CONDITIONING (HV AC) 23 09 00 Instrumentation and Control for HV AC 23 09 13 Instrumentation and Control Devices for HV AC 23 09 13.33 Control V alves Cartridge Globe V alves and Dedicated Actuators Mounting and Wiring 1.
179 GUIDE SPECIFICA TIONS 23 00 00 HEA TING, VENTILA TING, AND AIR-CONDITIONING (HV AC) 23 09 00 Instrumentation and Control for HV AC 23 09 13 Instrumentation and Control Devices for HV AC 23 09 13.13 Actuators and Operators Electric Large Linear Globe V alve Actuators Mounting and Wiring 1.
180 23 00 00 HEA TING, VENTILA TING, AND AIR-CONDITIONING (HV AC) 23 09 00 Instrumentation and Control for HV AC 23 09 13 Instrumentation and Control Devices for HV AC 23 09 13.13 Actuators and Operators Direct-Coupled Electr onic Digital Globe V alve Actuators Mounting and Wiring 1.
181 GUIDE SPECIFICA TIONS 23 00 00 HEA TING, VENTILA TING, AND AIR-CONDITIONING (HV AC) 23 09 00 Instrumentation and Control for HV AC 23 09 13 Instrumentation and Control Devices for HV AC 23 09 13.13 Actuators and Operators Direct-Coupled Rotary Actuator Globe V alve Linkage Mounting and Wiring 1.
182 23 00 00 HEA TING, VENTILA TING, AND AIR-CONDITIONING (HV AC) 23 09 00 Instrumentation and Control for HV AC 23 09 13 Instrumentation and Control Devices for HV AC 23 09 13.13 Actuators and Operators T andem Direct-Coupled Rotary Actuator Globe V alve Linkage Mounting and Wiring 1.
183 GUIDE SPECIFICA TIONS 23 00 00 HEA TING, VENTILA TING, AND AIR-CONDITIONING (HV AC) 23 09 00 Instrumentation and Control for HV AC 23 09 13 Instrumentation and Control Devices for HV AC 23 09 13.13 Actuators and Operators Footmount Globe V alve Actuators Mounting and Wiring 1.
184 23 00 00 HEA TING, VENTILA TING, AND AIR-CONDITIONING (HV AC) 23 09 00 Instrumentation and Control for HV AC 23 09 13 Instrumentation and Control Devices for HV AC 23 09 13.13 Actuators and Operators Footmount Globe V alve Actuators Mounting and Wiring 1.
185 ACCESSORIES Section 6: Accessories Ball Joints, Push Rod Accessories ........................................... 186 Control, Positioning, Feedback Accessories ............................ 186 Mounting Accessories .................................
186 Ball Joints, Push Rod Accessories Product Number De scription Used With 103598 Ball Joint ( 1/4 in .) Used With: All Actuators a nd Dampers All Actuators and Dampers 27518 Crankarm ballj oint with.
187 32003532-0 05 High T emperature Dual Switch Assembly ML4105, ML8105, ML4115 , ML8115, ML4125, ML8125, ML4135 , ML8135, MS4209, MS4309, MS47 09, MS4809, MS8209, MS8309 32006306-0 01 Resistor Kit (5.
188 32007205-004 Retaining Clip, Damper Exter nal Drive Pin Used With: Damper with External Actuator Mounting (i.e., 32007205-005 Kit) Damper with Exter nal Actuator Mounting (i.e., 32007205-005 Kit) 32007205-005 Damper Exter nal Drive Pin Kit Used With: Damper with External Actuator Mounting (i.
189 Crankar ms Product Number De scription Used With 205830A Rotary-to-Linear Kit Used With: 35 and 70 lb-in NSR and 25 , 44, 53, and 88 lb-in SR Actuators 35 and 70 lb-in.NS R 26026G Damper Crank Ar m, 1/2 in. damper shaf t All Actuators and Damper Shaft Adaptor Accessories Product Number De scription Used With 205843B Hub Insert, 1 in.
190 Enclosure Accessories Product Number De scription Used With 32003036-001 Weather Enclosure Used With: All Actuators All Actuators 50005859-001 NEMA 4 Enclosure for Dir ect Coupled Actuator 142 lb-in. Spring Return Actu ators; ML6161, ML6174, ML7161 , ML7174; N20 Actuators; N34 Ac tuators; 150 lb-in.
191 Accessories for Obsolete Actuators Product Number De scription Used With 205617 Hub Inser t, 3/4 in. (19mm) Used With: 150 lb-in NSR Actuators (ML Series) 150 lb-in. NSR Actuators (ML Series) 205685 Crank Ar m Kit Used With: 150 lb-in NSR Actuators (ML Series) 150 lb-in.
192 V alv e Actuator Accessories Product Number De scription Used With 114191A Auxiliar y Switch Assembly — 127834A Switch (made) — 272629A Adapter Kit for mounting ML6984/ ML7984 to V50 45 and VGF sta ndard 2-way valves.
193 Pneumatic Damper Actuator P ar ts and Accessories Product Number De scription Used With 14001213-0 01 MP904A and B Diaphragm MP904A,B 14002061-0 01 Damper Linkage Kit w/ T emplate MP909E,F 14002850-0 01 Angle Bracket 5 3/8 in, 137 mm, long, 5 in, 127 mm, wide MP909D,E 14003640-0 01 Angle Bracket 3 in.
194 14004264-001 MP918 Repair kit including Positive Positioner , bracket assembly and fittings MP918A 14004264-002 MP918 Positive Positioner Retrofit Kit includes 10 psi feedback spring MP918B 140043.
195 314440A MP909 - Clevis, Clevis Pin and Cotter Pin Assembly MP909 314503 MP909C Replacement Diaphragm MP909C 315321 Crankar m Balljoint (with 1/4 in male threads), fits 5/16 in.
196 Pneumatic V alv e Actuator P ar t s and Accessories Product Number De scription Used With 14002039-001 MP953D Diaphragm Sleeve MP953B,D,F 14002040-002 MP953D Diaphragm MP953B,D,F 14003124-002 MP95.
197 311851/0062 Stem extension for 8 in. dia. 3/4 in. str oke MP953A,C,E MP953A,C,E (8 in.) 311852 Brown Spring for MP953A,C 3/4 inch stroke (8 inch diam eter), 2-7 psi range MP953A,C (8 in., 2-7 psi) 311855 Gray spring for MP953C (8 inch diameter), 8-12 psi range MP953C 311863 Stem Retainer for the MP953C,E (8 in.
198 F oot Mounted Motor Accessories Product Number De scription Used With 203709D2 Screw T erminal Adapter With Zer o and Span Adjustment fo r Series 2 and Series 3 Modutrol IV Motors Series 2 and Series 3 Modutrol IV™ Motor 220738A Adapter Bracket.
199 221508A2 Resistor Board Assembly for Series 2 Modutrol IV Motors Series 2 Modutrol IV Motors 4074ERU Weatherproofing kit. Pr otects motor from driving rain when mounted in any position Fits all Mo.
200 Damper and V alv e Linkage Accessories Product Number De scription Used With 102546 Ball Joint, 5/16 in. Damper Linkages 101662A/0021 Motor Mounting Bracket Assembly for Q605 Q605 102931/0021 Adap.
201 CROSS REFERENCE Section 8: Competitive Cross Refer ence Direct Coupled Actuator ...........................................................202 Control Ball V alve 2-W ay V alve ......................................................................
202 Competitive Cr oss Refer ence Direct Coupled Actuator Belimo Model T orque (lb-in.) Control Signal Power Feedback Switches Timing (sec) Honeywell Actuator T orque (lb-in.) Control Signal a Power Feedback a Switches Timing (sec) LMB24-3-P5-T 45 lb-in.
203 Belimo Model T orque (lb-in.) Control Signal Power Feedback Switches Timing (sec) Honeywell Actuator T orque (lb-in.) Control Signal a Power Feedback a Switches Timing (sec) NMCB24-3-T 90 lb-in. (10 Nm) On/Off, Floating 24 V ac/Vdc — — 45 MN6110A1003 88 lb-in.
204 Belimo Model T orque (lb-in.) Control Signal Power Feedback Switches Timing (sec) Honeywell Actuator T orque (lb-in.) Control Signal a Power Feedback a Switches Timing (sec) AMX24-MFT 180 lb-in. (20 Nm) MFT 24 Vac/Vdc Variable (0-10 Vdc) — 150 (selectable 95-300) MN7220A2007 175 lb-in.
205 Belimo Model T orque (lb-in.) Control Signal Power Feedback Switches Timing (sec) Honeywell Actuator T orque (lb-in.) Control Signal a Power Feedback a Switches Timing (sec) LF24-ECON- R03 US 35 lb-in. (5 Nm) 0-3 kOhm, type 10 thermistor 24 V ac/Vdc 2-10 Vdc — 95 MS7405A2030 44 lb-in.
206 Belimo Model T orque (lb-in.) Control Signal Power Feedback Switches Timing (sec) Honeywell Actuator T orque (lb-in.) Control Signal a Power Feedback a Switches Timing (sec) TF24 US 18 lb-in. (2 Nm) On/Off 24 Vac/Vdc — — <75 MS8103A1030 27 lb-in.
207 CROSS REFERENCE Johnson Model T orque (lb-in.) Control Signal Power Feedback Switches Timing (sec) Honeywell Actuator T orque (lb-in.) Control Signal a Power Feedback a Switches Timing (sec) M9106-GGC-2 53 lb-in. (6 Nm) (0) 2-10 Vdc, (0) 4 to 20 mA 20 to 30 V ac at 50/60 Hz (0) 2-10 Vdc for 90 (1 mA at 10 Vdc).
208 Johnson Model T orque (lb-in.) Control Signal Power Feedback Switches Timing (sec) Honeywell Actuator T orque (lb-in.) Control Signal a Power Feedback a Switches Timing (sec) M9109-GGC-2 80 lb-in. (9 Nm) (0) 2-10 Vdc, (0) 4-20 mA, Reversible 20 to 30 V ac at 50/60 Hz (0) 2-10 Vdc for 90 (1 mA at 10 Vdc).
209 Johnson Model T orque (lb-in.) Control Signal Power Feedback Switches Timing (sec) Honeywell Actuator T orque (lb-in.) Control Signal a Power Feedback a Switches Timing (sec) M9124-AGD-2 210 lb-in. (24 Nm) On/Off, Floating 20 to 30 V ac at 50/60 Hz 0-1 35 Ohm — 115-175 for 0-210 lb-in.
210 Johnson Model T orque (lb-in.) Control Signal Power Feedback Switches Timing (sec) Honeywell Actuator T orque (lb-in.) Control Signal a Power Feedback a Switches Timing (sec) M9124-HGC-2 210 lb-in.
211 Johnson Model T orque (lb-in.) Control Signal Power Feedback Switches Timing (sec) Honeywell Actuator T orque (lb-in.) Control Signal a Power Feedback a Switches Timing (sec) M9216-BAA-2 140 lb-in. (16 Nm) & 280 lb-in. (32 Nm) On/Off 120 Vac — — — MS4120A1001 175 lb-in.
212 Johnson Model T orque (lb-in.) Control Signal Power Feedback Switches Timing (sec) Honeywell Actuator T orque (lb-in.) Control Signal a Power Feedback a Switches Timing (sec) M9216-HGA-2 140 lb-in.
213 CROSS REFERENCE Invensys Model T orque (lb-in.) Control Signal Power Feedback Switches Timing (sec) Honeywell Actuator T orque (lb-in.) Control Signal a Power Feedback a Switches Timing (sec) MA41-7153 133 lb-in. (15 Nm) On/Off 24 V ac ±20% 22-30 Vdc — - < 190 MS8120A1007 175 lb-in.
214 Invensys Model T orque (lb-in.) Control Signal Power Feedback Switches Timing (sec) Honeywell Actuator T orque (lb-in.) Control Signal a Power Feedback a Switches Timing (sec) MF41-6043 30 lb-in. (3.4 Nm) Floating 24 Vac 0.05 — — < 90 MN6105A1011 44 lb-in.
215 CROSS REFERENCE Invensys Model T orque (lb-in.) Control Signal Power Feedback Switches Timing (sec) Honeywell Actuator T orque (lb-in.) Control Signal a Power Feedback a Switches Timing (sec) MS4D-6083-160 70 lb-in. (8 Nm) 4-20 mA 24 V ac ±20% 20-30 Vdc 2-10 Vdc - < 85 MN7510A2001 88 lb-in.
216 Siemens Model T orque (lb-in.) Control Signal Power Feedback Switches Timing (sec) Honeywell Actuator T orque (lb-in.) Control Signal a Power Feedback a Switches Timing (sec) GEB161.1U 132 lb-in. (15 Nm) 0-10 Vdc 24 Vac 0-1kOhm — 125 — — — — — — — GEB132.
217 CROSS REFERENCE Siemens Model T orque (lb-in.) Control Signal Power Feedback Switches Timing (sec) Honeywell Actuator T orque (lb-in.) Control Signal a Power Feedback a Switches Timing (sec) GIB175.1P 310 lb-in. (35 Nm) On/Off, Floating 24 V ac 0-1kOhm — 150 — — — — — — — GIB166.
218 Siemens Model T orque (lb-in.) Control Signal Power Feedback Switches Timing (sec) Honeywell Actuator T orque (lb-in.) Control Signal a Power Feedback a Switches Timing (sec) GMA166.1U 62 lb-in. (7 Nm) 0-10 Vdc 24 Vac 0-1kOhm 2 90 — — — — — — — GMA166.
219 CROSS REFERENCE Notes & Numbers.
220 Contr ol Ball V alve Cr oss Refer ence 2-W ay V alve Pipe Size Cv Siem ens Cv Belimo Cv Inve nsys Cv Johnson Cont rol s Cv Honeywell Ni-Brass Stainless Steel 1/2 in. 0.4 599-10203 0.38 VB-2213-500-9-01 0.38 VBN2AB3P0X VBN2AB3S0X 0.63 599-10204 0.68 VB-2213-500-9-02 0.
221 CROSS REFERENCE Pipe Size Cv Siem ens Cv Belimo Cv Inve nsys Cv Johnson Cont rol s Cv Honeywell Ni-Brass Stainless Steel 1/2 in. 0.3 B207+LRB24-3 0.4 171A-10203 0.46 B208+LRB24-3 0.38 VF-2213-505-9-01 0.38 VBN2AB3P0A VBN2AB3S0A 0.63 171A-10204 0.8 B209+LRB24-3 0.
222 Pipe Size Cv Siem ens Cv Belimo Cv Inve nsys Cv Johnson Cont rol s Cv Honeywell Ni-Brass Stainless Steel 1/2 in. 0.3 B207+LRB24-SR 0.4 171C-10203 0.46 B208+LRB24-SR 0.38 VS-2213-505-9-01 0.38 VBN2AB3P0B VBN2AB3S0B 0.63 171C-10204 0.8 B209+LRB24-SR 0.
223 CROSS REFERENCE Pipe Size Cv Siem ens Cv Belimo Cv Inve nsys Cv Johnson Cont rol s Cv Honeywell Ni-Brass Stainless Steel 1/2 in. 0.3 B207+TFX24 US 0.4 171E-10203 0.46 B208+TFX24 US 0.38 V A-2213-536-9-01 0.38 VBN2AB3P0C VBN2AB3S0C 0.63 171E-10204 0.
224 Pipe Size Cv Siem ens Cv Belimo Cv Inve nsys Cv Johnson Cont rol s Cv Honeywell Ni-Brass Stainless Steel 1/2 in. 0.3 B207+TF24-3 US 0.4 171F-10203 0.46 B208+TF24-3 US 0.38 VF-2213-536-9-01 0.38 VBN2AB3P0D VBN2AB3S0D 0.63 171F-10204 0.8 B209+TF24-3 US 0.
225 CROSS REFERENCE Pipe Size Cv Siem ens Cv Belimo Cv Inve nsys Cv Johnson Cont rol s Cv Honeywell Ni-Brass Stainless Steel 1/2 in. 0.3 B207+TF24-SR US 0.4 171G-10203 0.46 B208+TF24-SR US 0.38 VS-2213-536-9-01 0.38 VBN2AB3P0D VBN2AB3S0D 0.63 171G-10204 0.
226 Pipe Size Cv Siem ens Model Cv Beli mo Model Cv Invensys Cv Joh nson Controls Cv Ho neyw ell Mode l Direct-Acting, Brass T rim 2-W ay V alves 1/2" 1 599-03162 0.4 G212 0.4 VB-7213-0-4-01 0.73 VG7241CT 0.73 V5011N1008 1.6 599-03163 1.3 G213 1.
227 Pipe Size Cv John son Controls Cv Be limo Model Cv Invensys Cv Hon eywe ll Mode l Br onze T ri m, A NSI 125 2-W ay V alves 2 1/2" 51 VB-3752-19 65 G665 56 VB-9213-0-5-12 63 V3351A2008 3".
228 Pneumatics Cr oss Refer ence ITE M NUMBER MANUF ACTURER RE PLA CE MEN T ITEM TYP E OF REPLACEMENT REMARKS 2463-863 ROBERTSHAW MP516A1087 FUNCTIONAL 2464-861 ROBERTSHAW MP516A1087 FUNCTIONAL 2466-0.
229 CROSS REFERENCE Pneumatics Cr oss Refer ence ITE M NUMBER MANUF ACTURER RE PLA CE MEN T ITEM TYP E OF REPLACEMENT REMARKS 2568-034 ROBERTSHAW V5 011 F1 089 w ith MP953C1000 FUNCTIONAL 2568-035 ROB.
230 Pneumatics Cr oss Refer ence ITE M NUMBER MANUF ACTURER RE PLA CE MEN T ITEM TYP E OF REPLACEMENT REMARKS MP909A1645 HONEYWELL MP9 09 D12 27 with 14002850- 001 with 312 86 7H wi th 14002061-001 FU.
231 CROSS REFERENCE Modutr ol IV Motor Cr oss Refer ence ITEM NUMBER REPL TYPE REPL ITEM MUL TI REPL REPL SEQ CHANNEL (BUSI GROUP) MFG NAME CUSTOMER REMARKS 2005377 FUNCTIONAL M934A1334/U 1 TRADE SING.
232 Modutr ol IV Motor Cr oss Refer ence ITEM NUMBER REPL TYPE REPL ITEM MUL TI REPL REPL SEQ CHANNEL (BUSI GROUP) MFG NAME CUSTOMER REMARKS M140GGA-1 FUNCTIONAL M9174D1007/U WITH 1 TRADE JOHNSON CONT.
233 CROSS REFERENCE Modutr ol IV Motor Cr oss Refer ence ITEM NUMBER REPL TYPE REPL ITEM MUL TI REPL REPL SEQ CHANNEL (BUSI GROUP) MFG NAME CUSTOMER REMARKS M6181F1017/U DIRECT M6184D1035/U WITH 1 ALL.
234 Modutr ol IV Motor Cr oss Refer ence ITEM NUMBER REPL TYPE REPL ITEM MUL TI REPL REPL SEQ CHANNEL (BUSI GROUP) MFG NAME CUSTOMER REMARKS M6294D1008/U FUNCTIONAL M6294D1008-S/U 1 ALL M6294F1009/U F.
235 CROSS REFERENCE Modutr ol IV Motor Cr oss Refer ence ITEM NUMBER REPL TYPE REPL ITEM MUL TI REPL REPL SEQ CHANNEL (BUSI GROUP) MFG NAME CUSTOMER REMARKS M734D1012/U DIRECT M9164D1009/U WITH 1 TRAD.
236 Modutr ol IV Motor Cr oss Refer ence ITEM NUMBER REPL TYPE REPL ITEM MUL TI REPL REPL SEQ CHANNEL (BUSI GROUP) MFG NAME CUSTOMER REMARKS M80F AA-2 FUNCTIONAL M9184A1019/U 2 TRADE JOHNSON CONTROLS .
237 CROSS REFERENCE Modutr ol IV Motor Cr oss Refer ence ITEM NUMBER REPL TYPE REPL ITEM MUL TI REPL REPL SEQ CHANNEL (BUSI GROUP) MFG NAME CUSTOMER REMARKS M845C1009/U FUNCTIONAL M8185D1006/U OR 1 TR.
238 Modutr ol IV Motor Cr oss Refer ence ITEM NUMBER REPL TYPE REPL ITEM MUL TI REPL REPL SEQ CHANNEL (BUSI GROUP) MFG NAME CUSTOMER REMARKS M9182C1017/U FUNCTIONAL M9185D1004/U WITH 1 ALL HONEYWELL M.
239 CROSS REFERENCE Modutr ol IV Motor Cr oss Refer ence ITEM NUMBER REPL TYPE REPL ITEM MUL TI REPL REPL SEQ CHANNEL (BUSI GROUP) MFG NAME CUSTOMER REMARKS M941A1024/U FUNCTIONAL M9484D1010/U 1 TRADE.
240 Modutr ol IV Motor Cr oss Refer ence ITEM NUMBER REPL TYPE REPL ITEM MUL TI REPL REPL SEQ CHANNEL (BUSI GROUP) MFG NAME CUSTOMER REMARKS M955C4000/U FUNCTIONAL M9185D1004/U WITH 1 TRADE HONEYWELL .
241 CROSS REFERENCE Modutr ol IV Motor Cr oss Refer ence ITEM NUMBER REPL TYPE REPL ITEM MUL TI REPL REPL SEQ CHANNEL (BUSI GROUP) MFG NAME CUSTOMER REMARKS SQS65 FUNCTIONAL M7410E1036/U 2 TRADE POWER.
242.
243 APPENDIX Sec ti on 8: APPENDIX A: V alve Selection & Sizing ...........................................................244 APPENDIX B: NEMA Standard Classification Code for Enclosur es ................ 263 APPENDIX C: Best Practices for Low Power Control Signal Wiring .
244 Appendix A: V alve Selection and Sizing Appendix A: V alv e Se lection and Sizing Introduction This section provides inf ormation on v alv e selection and sizing. V alves must be selected f or ability to meet temperatu re, pressure, flow control char acteristi c , and piping connection requirements of the hydronic system.
245 APPENDIX V alve Flow T erms Rangeability: The ratio of maximum flow to minimum controllable flow . Approximate r angeability ratios are 50 to 1 for V -por t globe valv es and 30 to 1 for contoured plug valves.
246 Close-off rating of three-wa y v alves: The maximum pressure diff erence between either of the two inlet por ts and the outlet port f or mixing v alves , or the pressure diff erence between the inlet por t and either of the two outlet por ts f or diver ting valv es.
247 APPENDIX V alve T ypes Ball valve: A ball v alve has a precision ball between two seats with a body (Fig. 3). Ball v alv es hav e se v eral por t sizes f or a give body siz e and go from closed to open with a 90 degree turn of the stem. The y are a v ailable in both two-wa y and three-wa y conf igurations.
248 Single-seated valve: A v alv e with one seat, plu g, and disc. Single-seated valv es are suitable f or applications requiring tight shut-off . Si nce a single-seated v alv e has nothing to balance.
249 APPENDIX V alv e Selection Proper valv e selection matches a valv e to the control and h ydronic system ph ysical requir ements. First consider the application requirements an d then consider the valve characteristics necessar y to me et those requirements.
250 Ball V alve Ball valv es are av ailable f or two-position applicati ons either manual (hand) or pow er operated or for mo dulating applications with direct coupled electric actuators . Ball v alves are relativ ely low cost, provide tight c lose off, and are av ailab le in two-w a y and three-wa y conf igurations.
251 APPENDIX Fig. 8. Linear vs. No nlinear System Contr ol. QUICK-OPENING V AL VE A quick-opening tw o-wa y valv e includes only a disc guide and a flat or quick-opening plug.
252 EXAMPLE: When a valv e with the stem at 30 percent of its total lift and e xisting flo w of 3.9 gpm (T a b le 2) opens an a dditional 10 per- cent of its full tra vel, the flow measures 6.
253 APPENDIX Fig. 13. Three-W ay V alve Applications . MIXING V AL VE A mixing v alv e provides tw o inlet por ts and one comm on outlet por t. The v alv e receiv es liquids to be mix ed from the inlet por ts and discharges the liquid through the outlet por t (Fig.
254 W ater V alves Deter mine the capacity index (C v ) f or a v alv e us ed in a w ater application, using th e f or mula: Where: Q = Flow of flui d in gallons per min ute required to pass through the valve . G = Specif ic gra vity of the fluid (w ater = 1).
255 APPENDIX 2. F or hot water coil v alv es: Where: cfm = Airflo w through the coi l. 1.08 = A scaling constant. See Note. TD a = T emperature diff erence of air entering and leaving th e coil. K = V alue from T able 3; based on temperature of water enter ing the coil (pounds per gallon x 60 minutes per hour).
256 c. A manual balancing valve ma y be installed in the boiler byp ass to equalize the boiler drop and the bypass drop . W ATER V ALVE SIZING EXAMPLES EXAMPLE 1: A two-wa y linear valv e is needed to control flow of 45F chilled water to a cooling coil .
257 APPENDIX Fig. 16. Chiller Bypass Application. EXAMPLE 3: Sizing water valv es f or heating coils is especi ally critical. In Figure 17, a v alv e with a C v of 12 will hav e 30 percent of the av ailable pressure drop when full open, while a valve with a C v of 5 will hav e 70 percent of the availab le pressure drop.
258 Use the water valv e C v formula to de termine capacity index f or V alve V1 as f ollo ws: Where: Q = Flow of flui d in gallons per min ute required to pass through the valve is 70 gpm. G = Specif ic gra vity of w ater is 1. h = Pressure drop across the valv e.
259 APPENDIX NO TE: The scaling constant 1.08 is deriv ed as f ollows : Where: Simplifying th e equation: T o find the scaling constant for air conditions other than standard, divide 14.
260 2. Determine the critical pressure drop: h critical = 50% x Pma Where: Pma = Pressure in supply main in psia (absolute pressure) psia = psig + 14.7 Use the smaller value h or h cr itical when calculating C v . T wo-P osition Applications Use line sized v alv es whene v er possible .
261 APPENDIX Select a linear valv e providing close control with a capacity inde x of 4 and meeting the required pressure and tempera- ture ratings . NO TE: F or steam valv es downstream from pressure reducing stations , the steam will be superheated in most cases and must be considered.
262 This larger valv e (2 psi drop) has a ste eper cur ve that is fur- ther aw ay from the desired lin ear valve characteristic. See LINEAR V AL VE under V AL VE SELECTION for more inf or- mation. Fig. 20. Effect of Pressure Drop in Steam V alve Sizing.
263 APPENDIX Appendix B: NEMA Standar d Classif ication Code f or Enclosures NEMA 1— General pur pose. f or indoor prote ction, where condi- tions are not unusually sev ere. NEMA 2— Drip tight. Designed to exclude f alling moisture or dir t. Particular ly applicable to cooling ro oms, laundries, etc.
264 Appendix C: Best Practices f or Low P ow er Control Signal Wiring Low pow er analog signals are commonly used for propor tional control signal wiring in HV AC applications. F ollo wing are a series of best practices f or the pr ev ention o f corruption of these signals due to electro-magnetic interference (“EMI”).
265 APPENDIX Notes & Numbers.
266 Notes & Numbers.
70-0568 Rev . 08-08 AUTOMATION AND CONTROL PRODUCTS W ARRAN TY POLICY Honeywell warr ants the products in this ca talog (except those part s designat ed on Honeywell's price lists as not cove red by this warranty) to be free from defects due to workmanship or materials, unde r normal use and servic e, for the followin g warranty periods.
4 Automation and Control Solutions In the US: Honeywell 1985 Douglas Drive North Golden V alley , MN 55422-3992 In Canada: Honeywell Limited 35 Dynamic Drive T oronto, Ontario M1V 4Z9 customer .honeywell.com 63-9271 PR March 2009 © 2009 Honeywell International Inc.
Een belangrijk punt na aankoop van elk apparaat Honeywell MS4103 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Honeywell MS4103 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Honeywell MS4103 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Honeywell MS4103 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Honeywell MS4103 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Honeywell MS4103 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Honeywell MS4103 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Honeywell MS4103 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.