Gebruiksaanwijzing /service van het product TP970 van de fabrikant Honeywell
Ga naar pagina of 24
® U.S. Registered Trademark Copyright © 1997 Honeywell Inc. • All Rights Reserved SER VICE DA T A TP970 and TP9600 Series Pneumatic Thermostats 75-7134-1 GENERAL The TP970 and TP9600 Series Pneumatic Thermostats are one-, two-, or three-pipe, proportioning thermostats with bimetal elements.
2 TP970 AND TP9600 SERIES PNEUMA TIC THERMOST A TS 75-7134—1 SPECIFICA TIONS Maximum Safe Air Pressure: 25 psi (172 kPa) Maximum Safe T emperature: 150F (66C) (continued) See T ables 1 though 6 for additional specifications.
TP970 AND TP9600 SERIES PNEUMA TIC THERMOST A TS 3 75-7134—1 T able 1. TP970A-D Thermostat Specifications (continued).* T able 2. TP971A-E Thermostat Specifications.
4 TP970 AND TP9600 SERIES PNEUMA TIC THERMOST A TS 75-7134—1 T able 2. TP971A-E Thermostat Specifications (continued).* Old Model No. New Model No. Description Setpoint Supply Air Pressure psi (kPa) Degrees Throttling Range Special Features — TP971A 2110 DA, Heating, 2-Pipe 60-90 ° F DAY Range 13 or 18 Adjustable 2- 10 ° F (1.
TP970 AND TP9600 SERIES PNEUMA TIC THERMOST A TS 5 75-7134—1 T able 3. TP972A Thermostat Specifications.* Action Supply Air Degrees Old Model No. New Model No. Left Bimetal Right Bimetal Setpoint Pressure psi (kPa) Throttling Range Special Features TP972A 1002 TP972A 2002 60-90 ° F 13 (Cooling) or Adjustable — TP972A 1010 TP972A 2010 R.
6 TP970 AND TP9600 SERIES PNEUMA TIC THERMOST A TS 75-7134—1 T able 4. TP973A and B Thermostat Specifications.* Old Model No. New Model No. Action Setpoint Supply Air Pressure psi (kPa) Degrees Thro.
TP970 AND TP9600 SERIES PNEUMA TIC THERMOST A TS 7 75-7134—1 T able 5. TP974A, TP978A-E, TP979A-E Thermostat Specifications. Old Model No. New Model No.
8 TP970 AND TP9600 SERIES PNEUMA TIC THERMOST A TS 75-7134—1 T able 6. TP9600 Thermostat Specifications. Model No. Description Setpoint Slot Includes Stat.
TP970 AND TP9600 SERIES PNEUMA TIC THERMOST A TS 9 75-7134—1 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 (100) (90) (80) (70) (60) (50) (40) (30) (20) (10) 0 15 12.
10 TP970 AND TP9600 SERIES PNEUMA TIC THERMOST A TS 75-7134—1 1 2 M HI LO N.C. N.O. D/N MP516C FAN P638 G TP971 C VALVE HEATING COIL H 120V AC 50/60 HZ AIR STREAM STAT 13/18 PSI (90/124 kPa) D/N MSB K H FILTER DISCHARGE AIR OUTDOOR AIR RETURN AIR C3541 Fig.
TP970 AND TP9600 SERIES PNEUMA TIC THERMOST A TS 11 75-7134—1 TP979A-E The TP979 thermostats provide independent control of heating and cooling with dual thermostats and separate setpoints and branch lines. This enables ZEB operation without selected actuator springs or ratio relays (Fig.
12 TP970 AND TP9600 SERIES PNEUMA TIC THERMOST A TS 75-7134—1 Calibration NOTES: 1. The antihum spring (Fig. 15) must be free. Be sure the spring just touches the throttling plate and is not wedged against it (does not apply to all TP970C and D or any TP970 series starting with 2000, i.
TP970 AND TP9600 SERIES PNEUMA TIC THERMOST A TS 13 75-7134—1 TP972A and TP9620A 1. With 13 psi (90 kPa) main air pressure, turn the DA Y (SUMMER) (left) calibration screw (Fig. 15) until the gage reads 0 psi (0 kPa). 2. T urn the calibration screw in the opposite direction until the gage reads 8 ± 1 psi (55 ± 7 kPa).
14 TP970 AND TP9600 SERIES PNEUMA TIC THERMOST A TS 75-7134—1 TROUBLESHOOTING See T able 7 for troubleshooting procedures. T able 7. TP970 Series Thermostat T roubleshooting Procedures. Problem Possible Cause Solution* Excessive noise If there is an antihum spring, it is not touching the throttling plate.
TP970 AND TP9600 SERIES PNEUMA TIC THERMOST A TS 15 75-7134—1 REP AIR Thermometer Replacement NOTE: The following procedure requires a 1/4-in. (6 mm) nut driver and a small screwdriver . 1. Insert the blade of a small screwdriver under the bimetal (Fig.
16 TP970 AND TP9600 SERIES PNEUMA TIC THERMOST A TS 75-7134—1 O-RING NOZZLE, THRO TTLING PLA TE AND BIMET AL ASSEMBL Y NOZZLE, THRO TTLING PLA TE AND BIMET AL ASSEMBL Y M12208 BOTT OM VIEW OF BIMET AL ASSEMBL Y SCREW SCREW ANTIHUM SPRING OR CONE SCREW IF THERE IS NO ANTIHUM SPRING/CONE, THERE IS AN ADHESIVE P APER DO T ON THE THROTTLING PLA TE.
TP970 AND TP9600 SERIES PNEUMA TIC THERMOST A TS 17 75-7134—1 M12205 SPRING LEVER COVER PLATE CAUTION: THIS PIN IS FREE TO DROP OUT WHEN LEVER IS RELEASED. Day/Auto Lever Assembly Replacement 1. Remove the three Phillips head screws that fasten the lever mechanism to the back of the thermostat (Fig.
18 TP970 AND TP9600 SERIES PNEUMA TIC THERMOST A TS 75-7134—1 PARTS AND ACCESSORIES Parts List TP970-TP974 and TP9600-TP9630 See Figures 22 and 23, and T able 8 for TP970-TP974 and TP9600-TP9630 Thermostat repair parts and assemblies.
TP970 AND TP9600 SERIES PNEUMA TIC THERMOST A TS 19 75-7134—1 T able 8. TP970-TP974 and TP9600-TP9630 Thermostat Repair Parts and Assemblies. Key No .
20 TP970 AND TP9600 SERIES PNEUMA TIC THERMOST A TS 75-7134—1 TP978E See Figure 24 and T able 9 for TP978E Thermostat repair parts and assemblies. The TP978A-D Thermostats have not been replaced. 5 4 3 2 1 M12207 Fig. 24. TP978E Exploded View . Key No .
TP970 AND TP9600 SERIES PNEUMA TIC THERMOST A TS 21 75-7134—1 T able 9. TP978E Thermostat Repair Parts and Assemblies. Model A BCDE Key No. Part No. Description 1 — Screw, No.
22 TP970 AND TP9600 SERIES PNEUMA TIC THERMOST A TS 75-7134—1 T able 1 1. TP970 Series Thermostat Accessories. Part No. Description Airhead: 14000686-002 Two-pipe red—angled 14000742-002 Two-pipe .
TP970 AND TP9600 SERIES PNEUMA TIC THERMOST A TS 23 75-7134—1 T able 12. TP970 Series Thermostat Covers—Satin Chrome. Part Number 14004406-XXX* Honeywell Logo No Logo Setpoint Slot Setpoint Slot O.
24 TP970 AND TP9600 SERIES PNEUMA TIC THERMOST A TS 75-7134—1 75-7134—1 R. F . Re v . 12-97 Home and Building Control Honeywell Limited-Honeywell Limitée 155 Gordon Baker Road North York, Ontario M2H 3N7 Home and Building Control Honeywell Inc. Honeywell Plaza P.
Een belangrijk punt na aankoop van elk apparaat Honeywell TP970 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Honeywell TP970 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Honeywell TP970 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Honeywell TP970 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Honeywell TP970 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Honeywell TP970 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Honeywell TP970 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Honeywell TP970 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
