Gebruiksaanwijzing /service van het product ZR-DH921NP van de fabrikant CBC
Ga naar pagina of 51
INSTRUCTION MANUAL Before connecting, operating or adjusting this product, read this instruction booklet carefully and completely . ZR-DH1621NP ZR-DH921NP.
ii © CBC Co., Ltd. All rights reserved. Second Edition (September 200 5 ) COPYRIGHT No part of this document may be reproduced or distributed in any form or by any means without the express written permission of CBC Co., Ltd. (hereafter ‘CBC’). TRADEMARKS GANZ is a registered trademark of CBC Co.
iii RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION CAUTION: T O REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK); NO USER-SERVICEABLE P AR TS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
iv IMPORT ANT SAFETY INSTRUCTIONS 1. Read these instructions. - All these safety and operating instructions should be read before the product is operated. 2. Keep these instructions. - The safety , operating and use instructions should be retained for future reference.
WARNING Pay attention to the following information before installing the GANZ ZR-DH1621NP/ZR-DH921NP . • Keep the product away from heat. Do not expose the product directly to the sun or heating apparatus. (becomes a fire hazard) • Do not leave vessels with water such as a vase, a flowerpot, a cup, which may cause fire or electric shock.
vi.
Contents vii 1 Parts and Features . . . . . . . . . . . . . . . . . . . . . . . . .1 1. 1 DVR System and Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 1. 2 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
viii 3. 4 Display Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16 3. 4. 1 User Defined Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16 3. 4. 2 Sequence . . . . . . . . . . . . .
Appendix B . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32 Recording Rate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32 Appendix C . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
x.
1 1. 1 DVR System and Accessories Appearance may vary . ZR-DH921NP Rack Mount Brackets RS-485/422 T erminal Block Alarm Out T erminal Block Alarm In (2EA) T erminal Block CD-ROM Power Cord RJ-1 1 Cabl.
1. 2 Features 1) High quality digital recording Record and playback High-Resolution digital video by using W avelet compression and decompression circuitry . 2) Simple user interface Simple operation by telemetry , integrated buttons and jog shuttle/dial.
3 1) DISPLA Y T oggles between 1, 4, 9, 16, 6, 8 and 7 split screens (ZR-DH921NP : 1, 4, 9, 6, 8 and 7 split screens). Enter PTZ on-screen menu in PTZ mode. 2) USER Enter user defined screen mode. Use the DISPLA Y button to toggle between 4, 9, 6, 7, 10, 13, 8 and PIP screens.
4 1 1) MENU Enter menu mode; exit sub-menus. 12) PTZ/ENTER Enter PTZ mode; select or confirm menu selection. 13) STOP Stops playback; reset alarms; hold down to select multiple cells in Recording Schedule.
1) PORT A (RS-422) Used for communicating with external devices in full-duplex RS-422. 2) LAN 10/100 Base-T ethernet connection. 3) PORT B (RS-422/RS-485) Used for communicating with external devices in full-duplex RS-422 or half-duplex RS-485 4) ALARM IN ZR-DH1621NP : 16 alarm inputs ZR-DH921NP : 9 alarm inputs 5) ALARM OUT 4 alarm outputs.
6.
2. 1 Power Setup Select power (AC 1 15V/AC 230V) by AC Selector according to input voltage. • If set as figure 1, AC 1 15V is selected. • If set as figure 2, AC 230V is selected. 2. 2 Telemetry Connection Multiple DVRs and keypads may be connected via RS-422 (PORT A).
2. 3 Alarm Connections 2. 3. 1 ALARM INPUT Connect up to 16 alarm sensors (ZR- DH921NP : 9 alarm sensors) using the supplied terminal blocks. 2. 3. 2 ALARM OUTPUT Connect up to 4 separate alarms to the Alarm Output. Alarm may be triggered by numerous events including digital motion detection, Full Disk, Signal Loss, Power Off, Network Access.
2. 4 External Storage 2. 4. 1 Using USB memory device Insert the memory device into the USB port. The system automatically recognizes the device. 2. 4. 2 Connecting CD-R/RW & HDD via USB Connect and power each USB device before powering the DVR. 2.
10.
The features and options of the DVR are configured through the menu. • Use the Jog Dial or directional buttons to navigate through the menu. • Press ENTER button to select or confirm.
3. 1. 3 Video Format The DVR can support both NTSC and P AL formats. This setting can be changed through the Video Format menu. To change the format select either NTSC or PA L and press the MENU button. The system will restart in the chosen format. 3.
Choose the recording methods, Field Rate and Recording Resolution for the block(s). T wo settings can be specified: one for continuous recording, the other for alarm and motion recording. • Field Rate The available rate depends on the resolution and the number of channels being recorded.
3. 2. 2 Specific Dates Schedule In addition to the weekly schedule, up to 16 specific date/time periods can be defined. T o configure the specific recording schedule select Specific Dates. • Add New Schedule With the "Add" highlighted press the ENTER button.
3. 3 Alarm Setup Within the Alarm Setup menu, alarm conditions and events, as well as digital motion detection settings are defined. 3. 3. 1 Alarm Outputs There are four alarm outputs. For each output, define the alarm inputs and conditions. • Alarm Select the alarm input(s) to trigger this alarm output.
3. 4 Display Setup 3. 4. 1 User Defined Screen In addition to the pre-defined screens, the channels can be arranged to the user ’s preference in the 8 variations of multi-screen views. This is very convenient when used with the AUTO sequencing function.
3. 4. 4 T ransparency The on-screen display can be made transparent from 0 ~ 80% so the images are not covered or blocked by the on-screen status or menu. 3. 5 Audio Setup The DVR can record and playback one of audio channel audio. • Gain Select the gain from 0 ~ 5.
3. 6. 2 HDD Management Both internal and external HDD storage devices can be managed through the HDD Management screen. The DVR can support 4 internal HDD drives and up to 20 external IEEE1394 devices. All drives detected by the system are listed with type, capacity and remaining free space.
19 3. 6. 3 Network Setup The DVR can be connected to a TCP/IP network to leverage the features which depend on network connection. Physically connect the DVR to the local network (LAN) using a straight ethernet cable.
• Use Time Server Select this option for automatic time synchronization to occur over the TCP/IP network using the T ime Server (SNTP). • Master Select this option if the DVR will act as the time server for other DVRs on the TCP/IP network. • Use Clock Adjust Select this option for automatic time synchronization via PORT A (RS-422).
21 Additional users can be managed by adding, deleting or changing the permission property of each User ID. 3. 6. 6 Firmware Management Firmware is the internal software of the DVR. This software can be saved or updated. Firmware updates may be necessary to improve the DVR functions.
22 • SMTP Server , Address, Port Number This setting is optional. The DVR can send e-mail directly without the use of SMTP server or MT A (message transfer agent). In certain cases all e-mail should be forwarded to a specific SMTP server . Specify the server host name or IP address in such case.
23 USB Restore/Backup List Pre Recording Time Post Recording Time Sequence Interval Sequence Channel Sequence Skip Video Loss Channel Sequence Alarm Sequence Spot Output (Monitor Output/Input Channel/Auto Select) Spot Input Channel Spot Auto Interval Spot Auto Channels Spot Auto Widh Monitor Output Spot Auto Skip V .
24 3. 6. 10 T elemetry Control • Unit ID When multiple DVRs are connected, assign an ID to each DVR. The Unit ID can be 0 ~ 99. • Unit Baud Rate Select the DVR communication speed. • PORT A, PORT 1, PORT 2 Select either DVR/keypad or one of the PTZ protocol.
3. 8 Event Log The DVR keeps the log of all events it detects. The log can be filtered and displayed through the Event Log screen. Specify the start date and filter options then select Display . Some events such as alarm and motion detection can be reviewed by selecting and pressing the ENTER button.
26.
27 4. 1 On-Screen Display Each channel is indicated either by its channel name or by the channel number . The date and time is displayed at the bottom of the monitor screen. In live view mode the recording status may also be displayed for each channel.
28 4. 5 Remote Access Remote viewing and playback is possible. The DVR can be viewed over the network with a standard web browser . On the brower address bar , type the IP address of the DVR or its DNS resolvable name. Ask a network administrator for detail.
29 Symptoms Resolution No power . - Check power connection to DVR No Front Panel LED activity . - Check position of 1 15V / 230V switch No Monitor Output. - Check and/or replace fuse - Check position of On/Off switch. - Power device on Normal Front Panel LED activity .
30 Symptoms Resolution No playback of audio with video. - Check all audio in/out connections to DVR - Make sure audio is activated and configured - Make sure audio is associated with an active video channel No firmware upgrade. - Check that new firmware version is correct Firmware upgrade failed.
31 Camera Setup Channel Name: no setup Brightness: 50 Contrast: 50 Saturation: 50 Hue: 0 PTZ Model: No PTZ PTZ Baud Rate: 9600 Recording Setup Schedule: Continuous for all channels Manual Recording: C.
32 Recording Rate Based on the number of video inputs and the horizontal resolution, the maximum recording rate will be adjusted automatically . As the number of channels being recorded is changed the maximum recording field/second is limited as in the table below .
33 Recording Time The table below shows the recording time in hours based on standardized general video signal. There may be a difference depending on the contents of the video input, motion and noise level.
34 Recording Time HDD: 250GB Resolution: 720 x 240 V ideo: 16 Channels Audio: none (Unit: Hour) HDD: 250GB Resolution: 720 x 240 V ideo: 9 Channels Audio: none (Unit: Hour) Quality FPS 6F/1S 3F/1S 2F/.
35 The table below shows the recording time in hours based on standardized general video signal. There may be a difference depending on the contents of the video input, motion and noise level.
36 HDD: 250GB Resolution: 360 x 240 V ideo: 16 Channels Audio: none (Unit: Hour) HDD: 250GB Resolution: 360 x 240 V ideo: 9 Channels Audio: none (Unit: Hour) Quality FPS 10F/1S 5F/1S 3F/1S 2F/1S 1F/1S.
37 Main Menu Camera Setup Channel Setup PTZ Model V ideo Format Recording Setup Schedule Manual Recording Record Mode Alarm Setup Alarm Outputs Event Alarm Name Alarm Buzzer Display Setup User Defined.
38 VIDEO FORMA T NTSC/P AL COMPRESSION SYSTEM V ideo: Wavelet, Audio: AC97(8/12bit, 8/12Khz) DVR TYPE T riplex (simultaneous Record, Playback, Live and Playback, LAN access) OPERA TING SYSTEM Embedded Linux VIDEO INPUT/LOOP OUT(ZR-DH1621NP) 16 x Composite 1.
39.
40.
P/NO: 3834RS0071X CBC Co ., Ltd. To ky o. Japan www .ganz.jp.
Een belangrijk punt na aankoop van elk apparaat CBC ZR-DH921NP (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen CBC ZR-DH921NP heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens CBC ZR-DH921NP vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding CBC ZR-DH921NP leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over CBC ZR-DH921NP krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van CBC ZR-DH921NP bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de CBC ZR-DH921NP kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met CBC ZR-DH921NP . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
