Gebruiksaanwijzing /service van het product DV710SS van de fabrikant CDA
Ga naar pagina of 56
B UIL T U NDER D OUBLE O VENS Instruction for the use - Installation advice KEEP IN A SAFE PLACE Before operating this oven, please read these instructions car efully.
2 Dear Customer , Thank you for having pur chased and given your pr efer ence to our pr oduct. The safety pr ecautions and r ecommendations within this booklet ar e for your own safety and that of others. They will also pr ovide a means by which to make full use of the featur es offer ed by your appliance.
3 DECLARA TION OF CE CONFORMITY • This double oven has been designed to be used only for cooking. Any other use (such as heating a room) is impr oper and dangerous.
4 IMPOR T ANT PRECAUTIONS AND RECOMMENDA TIONS FOR USE OF ELECTRICAL APPLIANCES Use of any electrical appliance implies the necessity to follow a series of fundamen- tal rules.
5 IMPOR T ANT SAFEGUARDS & RECOMMENDA TIONS ■ Do not carry out any cleaning or maintenance without first disconnecting the appliance from the electrical supply . ■ During and after use of the double oven, certain parts will become very hot. Do not touch hot parts.
6 1 C ONTROL P ANELS Fig. 1.1 Fig. 1.3 Fig. 1.4 1* 2 9 - 10 3 4* 2 1* 3 4* Symbols type 1 Symbols type 2 Symbols type 1 Symbols type 2 A 1* 2 8 3 4* 1* 2 3 6 5 6 5 6 5 6 5 4* 11 12 13 7 Symbols type 1 Symbols type 2 T ype A - CONTROL P ANELS Fig.
7 T ype A - CONTROL P ANELS DESCRIPTION 1. Oven temperature knob (Bottom main oven) 2. Function selector knob (Bottom main oven) 3. Function selector knob (T op oven) 4. Oven temperature knob (T op oven) 5. Main oven temperature indicator light 6. T op oven temperature indicator light 7.
8 Fig. 1.4 Fig. 1.5 Fig. 1.6 Fig. 1.7 1* 2 3 4* 8 7 5 6 1* 2 3 4* 8 7 5 6 11 - 12 Symbols type 1 Symbols type 2 Symbols type 1 Symbols type 2 A 10 1* 2 3 4* 8 7 5 6 13 14 15 9 Symbols type 1 Symbols t.
9 T ype B - CONTROL P ANELS DESCRIPTION 1. Oven temperature knob (Bottom main oven) 2. Function selector knob (Bottom main oven) 3. Function selector knob (T op oven) 4. Oven temperature knob (T op oven) 5. Main oven ON indicator light 6. Main oven temperature indicator light 7.
10 2 T OP O VEN GENERAL FEA TURES This oven features 2 dif ferent thermo- static control functions to satisfy all cooking requir ements, provided by 3 heating elements: • Upper element, 700 W • Lo.
11 GRILLING The infra-red heating element is switched on. The heat is diffused by radiation. Use with the oven door closed and the thermostat knob must be regulated between 50°C and 200°C maximum. For correct use see chapter “USE OF THE GRILL”. Recommended for: Intense grilling, browning, cooking au gratin and toasting etc.
12 3 B OTTOM M AIN O VEN GENERAL FEA TURES The multi-function oven can be pro- grammed for 7 differ ent functions to satisfy every cooking need. The 7 positions are thermostatically controlled and ar .
13 Fig. 3.1 Fig. 3.2 Depending on the models the ther- mostat could have differ ent graphics: - 50 to 225 or - 50 to 250 or - 50 to MAX. TEMPERA TURE KNOB (fig. 3.2) T o tur n on the heating elements of the oven, set the function selector knob to the requir ed position and the temperature knob to the desired temperatur e.
14 GRILLING The infra-red heating element is switched on. The heat is dif fused by radiation. Use with the oven door closed and the temperature knob set between 50°C and 200°C maximum.
15 VENTILA TED GRILL COOKING The infra-red grill and the fan ar e on. The heat is mainly diffused by radiation and the fan then distributes it throughout the oven. The temperature must be r egulated between 50°C and 175°C maximum with the tem- perature knob.
16 The external parts of the oven become hot during operation. Keep children well out of r each. COOKING ADVICE ROASTING T o obtain classical roasting, it is neces- sary to remember: – that it is advisable to maintain a tem- perature between 180 and 200 °C.
17 4 C LOCK AND T IMER WITH “T OUCH -C ONTROLS ” KEYS B OTTOM M AIN O VEN O NL Y Fig. 4.1 Keys: + and – / and T ouched simultaneously (for more than 2 seconds): • setting the clock; • setting the timer volume (by touching once, along with the “ MODE ” key); • to cancel automatic cooking at any time.
18 “TOUCH-CONTROL” KEYS The “touch-control” keys shall be operated by the fingers (just by touching the key). When using touch controls it is best to use the ball of your finger rather than the tip.
19 SETTING THE TIMER VOLUME Y ou can select from three volume levels. • T ouch the “ + / ” and “ – / ” keys simultaneously for more than 2 seconds. • T ouch the “ MODE ” key; you can read on the display the curr ent timer volume (“ ton1 ”, “ ton2 ” or “ ton3 ”).
20 Description of the buttons: Time Cooking time. End of cooking time. simultaneously: Switching to manual and program r eset. Minus function to decrease the number shown on the display or to change the buzzer fre- quency . Plus function to increase the number shown on the display .
21 Fig. 5.2 Fig. 5.3 CANCELLING A PROGRAMME If the letter A is not flashing (which means that a cooking program has already been set) by pr essing the two buttons () simultaneously you will cancel the program and switch to manual. If the oven is on, you must switch it off manually .
22 AUDIBLE SIGNAL The audible signal sounds at the end of a minute minder cycle or of a cooking programme for a period of 7 minute. The signal can be cancelled by pressing any function button. Pressing the ( ) button without having previously selected a function the frequency of the signal change.
23 The oven will come on immediately and when the set time or programmed end of cooking time expires, it will automat- ically switch off. During cooking the letter A and the symbol remains on; pr ess button ( ) to display the remaining time until end of cooking or press button ( ) to dis- play the end of cooking time.
24 AUTOMA TIC COOKING T o cook in the oven in automatic mode follow the instructions below: 1. Set the cooking time 2. Set the end of cooking time 3. Set the cooking temperature and function These operations are carried out as fol- lows: 1.
25 The electronic pr ogrammer is a device with the following functions: – 24 hours clock with illuminated display – Timing of oven cooking with automatic switch-off (max. 99 minutes). ELECTRONIC CLOCK Upon immediate connection of the oven or after a mains failure, thr ee zeros will flash on the programmer panel.
26 ELECTRONIC ALARM The programmer can be used as an alarm only for a maximum period of 99 minutes. T o set the alarm, push the ( ) or ( ) button until you obtain the desired time in the display . Once the time has elapsed, an intermit- tent buzzer , lasting 7 minutes, will start; this can be stopped by pressing the ( ) button.
27 Fig. 6.2 The electronic alarm is a device which groups the functions of 24 hours clock with illuminated display and 99 minutes alarm (fig. 6.2). Upon immediate connection of the oven or after a blackout, three zer os will flash on the programmer panel.
28 The function of the timer runs the oven for a preset time (fig. 6.3). ST AR TING UP After setting the function selector and thermostat to the requir ed mode and temperature, r otate the timer knob clockwise until you reach the r equired cooking time (max 120 minutes).
29 The minute counter is a timed acoustic warning device which can be set for a maximum of 60 minutes. The knob must be rotated clockwise as far as the 60 minute position and then set to the requir ed time by rotating it anticlockwise (fig. 6.5). The minute counter is a timed acoustic warning device which can be set for a maximum of 120 minutes.
30 7 C LEANING AND M AINTENANCE GENERAL ADVICE Important: Before any operation of cleaning and maintenance disconnect the appliance fr om the electrical supply . It is advisable to clean when the appliance is cold and especially for cleaning the enam- elled parts.
31 ST AINLESS STEEL SURF ACES (MODELS WITHOUT ANTI-FINGERPRINT TREA TMENT), ALUMINIUM P AR TS AND P AINTED OR SILK-SCREEN PRINTED SURF ACES Clean using an appropriate pr oduct. Always dry thoroughly . IMPORT ANT : these parts must be cleaned very car efully to avoid scratching and abra- sion.
32 OVEN FITTING OUT MODELS WITH EMBOSSED CA VITY The oven shelves are pr ovided with a security block to prevent accidental extraction. They must be inserted operating as per figure 7.1a - 7.1b. T o pull them out operate in the inverse order . Fig. 7.
33 Fig. 7.3b Fig. 7.3a BOTTOM MAIN OVEN TOP OVEN Fig. 7.2a A Fig. 7.2b A MODELS WITH WIRE RACKS – Assemble the wir e racks to the oven walls using the 2 screws (Fig. 7.2a - 7.2b). In the models with catalytic panels interpose the catalytic panels “A” with the arrow up (fig.
34 TELESCOPIC SLIDING SHELF SUPPOR TS (SOME MODELS ONL Y) The telescopic sliding shelf supports make it safer and easier to insert and remove the oven shelves and trays. They stop when they are pulled out to the maximum position. Important! When fitting the sliding shelf supports, make sure that you fit: – The slides to the top wire of a rack.
35 T o remove the telescopic sliding shelf supports: – Remove the side racks by unscrewing the fixing scr ews (Figs. 7.6 - 7.7). – Lay down the telescopic sliding shelf support and side racks, with the telescopic slid- ing shelf support underneath.
36 MODELS WITH SLIDING SHEL VES – Assemble the sliding shelves on the oven wall as in Fig. 7.9a - 7.9b. In the models with catalytic panels interpose the catalytic panels “A” with the arrow up (fig.
37 GREASE FIL TER - SOME MODELS ONL Y (bottom oven only) • Slide in the grease filter on the back of the oven as in fig. 7.11. • Clean the filter after any cooking! The grease filter can be r emoved for cleaning and should be washed regularly in hot soapy water (fig.
38 MODELS WITH TIL TING GRILL (fig. 7.12a) – The grill is secur ed to the rear wall of the oven on a hinge system that allows it to be lowered to allow pr oper access when cleaning the oven ceiling (fig. 7.12a). – In the fr ont the grill is secured to the ceiling by a hook A .
39 REPLACING THE OVEN LAMP B C Fig. 7.13 WARNING: Ensur e the appliance is switched off before r eplacing the lamp to avoid the possibility of electric shock. • Let the oven cavity and the heating elements cool down; • Switch off the electrical supply; • Unscrew the pr otective cover (fig.
40 Fig. 7.14 Fig. 7.14a B A C Fig. 7.14b Fig. 7.14c Fig. 7.14d REMOVING THE OVEN DOORS The oven doors can easily be removed as follows: – Open the door to the full extent (fig. 7.14a). – Open the lever A completely on the left and right hinges (fig.
41 REMOVING THE INNER P ANE T o clean the inner pane of the oven doors on both sides operate as follows: – Open the door to the full extent (fig. 7.15). – Open the lever A completely on the left and right hinges (fig. 7.16). – Gently close the door (fig.
42 D G Fig. 7.24 Fig. 7.21 Fig. 7.20 E F Fig. 7.23 H Fig. 7.22 REASSEMBLING THE INNER P ANE T o reassemble the inner pane of the oven doors operate as follows: – Make sure the door is locked open (see Fig. 7.17). – Check the correct positioning of the no.
43 DO’S AND DO NOT’S ✓ Do always grill with the oven door closed. ✓ Do always remove the detachable handles when using the grill pan. ✓ Do read the user instructions car efully before using the double oven for the first time.
44 A DVICE FOR THE I NST ALLER IMPORT ANT ✓ Appliance installation and maintenance must only be carried out by QUALIFIED TECHNI- CIANS and in compliance with the local safety standards. Failure to observe this rule will invalidate the warranty . ✓ Always unplug the appliance befor e carrying out any maintenance operations or repairs.
45 8 I NST ALLA TION IMPOR T ANT • The appliance should be installed by a QUALIFIED INST ALLA TION TECHNICIAN. The appliance must be installed in compliance with regulations in for ce.
46 INST ALLA TION "C" BY USING HOUSING UNIT (figs. 8.3a, 8.3b, 8.3c) • Remove the upper cross member support as indicated in figur e 8.3b. • Cut the bottom of the housing as indicated in figure 8.3b. • Screw oven base housing to adjoining cabinetry by suitable scr ews (not supplied) as indicated in figure 8.
47 544 20 538 718 595 42 560 B WARNING ! VER Y IMPORT ANT The underside of the cabinet shall be opened to allow correct air cir culation. 720 min ( * ) B Support base 570 min Fig. 8.1b ( * ) Measure calculated from the underneath of the worktop to the top support base of the “ B ” supports.
48 544 20 538 718 595 600 WARNING ! VER Y IMPORT ANT The underside of the cabinet shall be opened to allow correct air cir culation. 720 min ( * ) B 570 min 20 22 15 20 - 50 18 A B 650 A Support base ( * ) Measure calculated from the underneath of the worktop to the top support base of the “ B ” supports.
49 15 15 30 25 18 18 36 30 544 20 538 718 595 B INST ALLA TION “C” Fig. 8.3a Fig. 8.3c Cabinet for installing the oven ( * ) Measure calculated from the underneath of the worktop to the top support base of the “ B ” supports. Remove single oven shelf, if fitted.
50 10 mm 2 mm KEEP A TTENTION ! ST AND AWA Y FROM LOUVERS POSI- TIONED BELOW THE CONTROL P ANEL. HOT AIR WHICH ESCAPES CAN CAUSE BURNS TO HANDS, F ACE, END/OR EYES. KEEP CHILDREN AW A Y . Fig. 8.6 IMPORT ANT : If installing a base panel leave a space as indicated in fig.
51 OVEN DOOR LOWER TRIM AIR FLOW IMPORT ANT : T o avoid damage to the lower trim please note the following instructions . The lower trim is designed to allow for good air circulation and the corr ect opening of the oven door .
52 GENERAL • The connection to the electrical net- work must be carried out by qualified personnel and must be according to existing norms. • The appliance must be connected to the electrical netw.
53 A B C P D Green & Yellow (Earth) Brown (Live) Blue (Neutral) Fig. 9.1 Fig. 9.2 WARNING: This appliance must be earthed CONNECTING THE DOUBLE OVEN MAINS CABLE – Unscrew the scr ews A securing the cover plate B behind the oven (fig. 9.1). – Remove the cover plate B.
54.
55.
Cod. 1103102 - ß2 Descriptions and illustrations in this booklet are given as simply indicative. The manufacturer reserves the right, considering the characteristics of the models described her e, at any time and without notice, to make eventual necessary modifications for their construction or for commercial needs.
Een belangrijk punt na aankoop van elk apparaat CDA DV710SS (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen CDA DV710SS heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens CDA DV710SS vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding CDA DV710SS leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over CDA DV710SS krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van CDA DV710SS bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de CDA DV710SS kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met CDA DV710SS . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
