Gebruiksaanwijzing /service van het product PROMI 1000 van de fabrikant CDV Software
Ga naar pagina of 23
Edition 06/2004 G0301FR0222V01 WIRING DIAGRAM AND INSTRUCTION This device comes with a varistor. The varistor must be connected on the strike terminal (electro- magnet…) operated by the device. If this product operates more than one strikes, each of them should have a varistor.
Edition 10/2003 2 PROMI 1000 USER MANUAL I. PRESENTATION DU PRODUIT .............................................................................................................................. 3 A. Product presentation ..............................
Edition 10/2003 3 I. PRESENTATION DU PRODUIT A. Product presentation - Input voltage 12V AC/DC - 12-digit keypad with LED visual in dicator - EPROM memory storage - Date and hour saving with 3V CR2032.
Edition 10/2003 4 B. Factory Default Values Operating mode: 0 badg e and Pin code Door open time: 1 second Alarm time delay: 00 ala rm disabled Key-in keypad time: 10 seconds Master code: 12345 No time zone No Holiday Anti pass back disabled DTR signal on for printer Programming time : 2 minuts C.
Edition 10/2003 5 reference: TP50XSE2C RS232 with DTR signal (printer on line) 9600 bau ds D ip switchs set up on the printer 1 start ON 7 bits Parity: even 1 2 3 4 5 6 7 8 1 stop IBM mode 40 characte.
Edition 10/2003 6 II. PROGRAMMING A. Colors and audible signals The letter in bolt repres ents the LED col or. (O for orange, G for green and R for red) the digit rep resents th e number of b eep emitte d. The LED turns gree n and the 1 beep is emitte d.
Edition 10/2003 7 --- Present the badge in fron t of the PROMI1000 o r in front the external reader (nal reader: see Menu 10 ) OR Select a user number, enter the 3-digit user number from 000 to 999 --.
Edition 10/2003 8 OR Press 2 to select badge OR Pin code ope rating mode. The LED lights on in green Then press # . The PROMI 1000 returns to the main menu E. Menu 02 – Door release time Enter 02 to enter in the door release time menu Enter the time in seconds from 01 to 99 for a momentarily output or 00 for a latched output.
Edition 10/2003 9 H. Menu 05 – Setting date and hour Enter 05 to enter in the date and hour menu Enter the hour and minutes then the day, month, year and the week day Week day: Monday --------- ente.
Edition 10/2003 10 J. Menu 07 – Holidays Press 07 to enter in the holidays menu 16 different holidays can b e programmed, enter the a holiday number from 01 to 16 Then enter th e day and mon th for this holiday Example: 25 Octobe r, enter 25 10 The LED lights on in green Then press # .
Edition 10/2003 11 To stop the printer at any time keep pressing on the 0 k e y u n t i l t h e L E D l i g h t s o n i n g r e e n a n d a beep is emitt ed. At the end of the printing the a message “END PRINTING” appears on the report. The LED lights on in green Then press # .
Edition 10/2003 12 Press 3 to print all the code of badge and Pin code. To abord the printing report, keep pressing on the 0 key until the LED lights on in green and a beep is emitted. Only the last 8-digit of the code of the badge are printed on the report.
Edition 10/2003 13 The LED lights on in green Then press # . The PROMI 1000 returns to the main menu To program badges an d Pin code selec t Menu 00 . The built-in r eader of the cont roller is set back as the default badge enrolm ent unit on ce you exit from programming.
Edition 10/2003 14 Press 1 to authorize the access for the selected user number (cardholde r) or press 0 to deny ac- cess for the selected user numbe r during the holidays.
Edition 10/2003 15 The LED flashes in r ed and a beep is emitted. Remove the jumper from 2-3 position then the unit goes bac k to stand-by mode. OR Keep the jumper on 2-3 position to reset the badges, pin codes, schedules and holidays from the PROMI 1000 memory.
Edition 10/2003 16 After 3 incorrect badge and/or PIN co de are en tered, the PROMI 1000 reader and the second proximity rea der are lock ed out duri ng 2 minu tes and the alarm rela y is activat ed. 2 au di ble b eeps sound when the badge/PIN code are not valid.
Edition 10/2003 17 Note : 1. During an alarm the reader and the request-to-exit are enabled. 2. To cancel th e alarm go to Menu 03 in programming and enter 00 .
IV. PROGRAMMING DIAGRAM PROMI 1000 Key-in programmin g time : 2minutes and key-in keypad time : 10 seconds , no schedule no holiday 01 Operating mode Press 0 for badge and Pin code Press 1 for badge only Press 2 for badge or Pin code 02 Door release time: Enter 01 to 99 sec.
19 Year format 2-digit Week days: everyday = 0; Monday = 1; Tuesda y = 2 …… Sunday = 7; Monday to Friday = 8 ; Satu rday and Sunday = 9 Signalétique O range LED with 2 beeps validate d ata comput.
V. WIRING DIAGRAM Reset of master code, badges, pin codes and évènts ST1 without normal mode The PROMI 1000 and the remote reader must be separated between each oth er by 60 cm. Also, if two PROMI 1000 are installed next to each other a distance of 60 cm must be kept be- tween the two units.
21 Terminal Signification 12 Input voltage 12VAC or DC V Input voltage 12VAC or DC TN / O c o n t a c t C Common contact RN / C c o n t a c t A N/O alarm contact 5 Remote read er red LED 3 Remote read.
22 User num- ber Badge Pin Code Username Holiday.
23 VI. TEMPLATE PROMI1000 20.5 105 120 135 23 24 15 38 61 75.5 Wiring access Area 30 x 40.
Een belangrijk punt na aankoop van elk apparaat CDV Software PROMI 1000 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen CDV Software PROMI 1000 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens CDV Software PROMI 1000 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding CDV Software PROMI 1000 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over CDV Software PROMI 1000 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van CDV Software PROMI 1000 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de CDV Software PROMI 1000 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met CDV Software PROMI 1000 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
