Gebruiksaanwijzing /service van het product FM 2500DD-A van de fabrikant AEG
Ga naar pagina of 40
FM 2500DD-A 949 601 706 325 88-8514 rev . 6-437 GB INSTRUCTION BOOK.
2 Y our Ne w Appliance Thank you for purchasing an AEG appliance. T o enable you to use your new appliance efficiently and safely , please read this instruction book carefully before installing or using the appliance, and retain for future reference.
3 Contents P a ge No. For the user Y our New Appliance ........................................................................................ 2 Safety information ......................................................................................
4 Contents P a ge No. For the electrician Unpacking ...................................................................................................... 20 T echnical data .............................................................................
5 Saf ety Inf ormation Keep an eye on children when the downdraught extractor is in use. Never let children touch or play with the control knobs. Never leave the downdraught extrac- tor unattended when deep-frying or melting fat, paraf fin wax or other easily ignited substances.
6 The downdraught extractor may only be installed by an authorised electri- cian or someone approved by the manufacturer . W ork carried out by unqualified per- sons can lead to personal injury and/or damage to property and may damage the downdraught extractor .
7 Pr oduct Description 32 4 5 7 61 8 Contr ol P anel 1. On/of f 2. Raise the downdraught extractor 3. Lower the downdraught extractor 4. Set the extraction rate 5.
8 Downdraught Extractor The air is sucked in at the air dampers through the fat filter and is then blown via the extraction hose to the extraction duct and out into the open air . Height positions The downdraught extractor has 4 dif ferent extraction strengths: 150m3/h, 220m3/h, 345 m3/h and 480 m3/h.
9 Ho w to use Downdraught Extractor Never leave the down- draught extractor unattended when deep-frying or melting fat or other easily ignited substances. Do not flambe food in the immediate prox- imity of a downdraught extractor that is switched on. This can cause fire.
10 Downdraught Extractor 1. T o turn the downdraught extractor on, press k . 2. T o select the height position, press m . The downdraught extractor will move to middle position and switch on at extraction rate 1. T o turn the downdraught extractor of f, hold l down until bottom position has been reached.
11 The downdraught extractor will then stop rising automatically when the button is released or when top posi- tion is reached. Safety If the downdraught extractor is obstructed when raising, it will switch of f automatically .
12 Raising When the downdraught extractor is switched on. Select the height position within 10 seconds. 1. Press m . The downdraught extractor will move to top position and switch on at extraction rate 1. The dampers will deploy on the way up. Safety If the downdraught extractor is obstructed on the way up, it will switch of f automatically .
13 Extraction rates The downdraught extractor can be set to three levels and intensive extraction. Level 1: 150 m³/h Level 2: 220 m³/h Level 3: 345 m³/h Intensive extraction: 480 m³/h Setting the extraction rate When the downdraught extractor is on, raised and at rate 1.
14 Intensive extraction The downdraught extractor is on and raised. 1. Press b . The downdraught extractor will extract on intensive for 5 minutes. It will then return automatically to its last setting before intensive extrac- tion was activated.
15 Time-contr olled switc hing off Y ou can set the downdraught extrac- tor to switch of f automatically at a later time. T ime-controlled switching of f can be set from 1 to 99 minutes. When the downdraught extractor is switched on and raised up. The suc- tion strength is switched to speed 1, 2 or 3 (not to intensive suction).
16 When the time set has passed, suc- tion strength is switched of f. The downdraught extractor remains in the height position set. If you want to switch of f the extrac- tion rate before the time has passed, press the A button until the display shows “00”.
17 Correct ventilation The extractor works best when there is low pressure in the kitchen. Therefore, the kitchen windows must be closed when the extractor is in operation. At the same time, it is a good idea to open a window in an adjacent room; see fig.
18 Carry out daily cleaning with a well wrung-out cloth. For more stubborn soiling, use a cloth or a soft plastic sponge together with washing-up liquid or all-purpose cleaner . Never use metal cleaning pads, metal wool, hard plastic sponges, scouring powder , soft soap or other abrasive or caustic cleaning agents.
19 7. Assemble the filter , spring and top cabinet in reverse order . The filter must be completely dry before it is re-fitted in the extrac- tor . 8. Reset the filter cleaning indicator by pressing < and A simulta- neously for 3 seconds. "CL" will disappear from the display .
20 Unpac king Any damages resulting from a trans- port which you have not performed yourself must be communicated to the dealer within one week of receipt of the product. On the rating plate which is placed on the back of the product you will find the CE marking and the prod- uct’ s serial number .
21 T echnical Data Model FM 2500DD-a: Pr oduct dimensions: W idth: 180 mm Depth: 520 mm Height: 600 mm Installation dimensions: W idth: 160 mm Depth: 490 mm Height: 647 mm Extraction rate: Level 1 150.
22 Installation Electrical Installation Installation must be carried out by an authorised electri- cian or by a person autho- rised by the manufacturer . W ork carried out by unquali- fied persons can lead to per- sonal injury and/or damage to property and may spoil thedowndraught extractor .
23 Exhaust connection: The connecting piece for the hose or pipe has a diameter of 120 mm. The exhaust hose must be at least 1 m long. Make sure that the connection is completely airtight.
24 If the downdraught extractor is installed beside a gas appliance, it must only be operated in top posi- tion and extract from the other side, i.e. the damper closest to the gas appliance must be closed permanent- ly . This can be done as follows: 1.
25 3. Fitting the cover plate Fit the cover plate as follows: 1. Position the cover plate against the glass on the top cabinet. 2. Position the cover plate against the top cabinet. 3. Mark the four holes on the top cabinet, using the cover plate as a template.
26 Mounting It is advisable to position the down- draught extractor immediately next to the hob. If two or more hobs are being used, the downdraught extrac- tor should be positioned between them so that optimum use can be made of its variable extraction direc- tion.
27 Cutting Out When fitting this product: read the instructions on this page. When fit- ting this unit in conjunction with other units: read the instructions on the following page. For fitting this unit you will need a Phillips screwdriver and the fixing supplied (see fig.
28 Mounting more than one hob Cutting out The measurement of the selected combination is calculated in the following way: Depth: 490 mm W idth: 1. Calculate the sum of all units’ width. 2. Subtract 20 mm from the total width. Example: A hob of 720 mm + a downdraught of 180 mm + a gas hob of 360 mm.
29 Mounting: When mounting several hobs together you must use a reinforcement beam between each hob as well as the silicone supplied with the hobs (see fig.) 1. Cut a hole of the calculated size in the table top 2. Place the individual hobs upside down on a mat.
30 Overview of the outside width of the units 180 mm Downdraught 360 mm Glass ceramic hob with 2 cooking zones Gas hob with 2 burners Induction hob with 2 cooking zones Grill Grill / Fryer Wo k 580 mm.
31 What to do if ... If the appliance is not working correctly , please carry out the following checks before contacting your local AEG Service Force Centre. IMPOR T ANT : If you call out an engineer to a fault caused by incorrect use or installation, a char ge will be made even if the appliance is under guarantee.
32 In-guarantee customers should ensure that the above checks have been made as the engineer will make a char ge if the fault is not a mecanicas or electrical brakedown. Please note that it will be necessary to provide proof of purchase for any in-guarantee service calls.
33 In the event of your appliance requiring service, or if you wish to purchase spare parts, contact your local AEG Service Force Centre by telephoning: 08705 929 929 Y our call will automatically be routed to the Service Centre covering your post code area.
34 Customer Car e For general enquires concerning your AEG appliance or for further information on AEG products, please contact our Customer Care Department at the address below or visit our website at www .
35 · The appliance has not been serviced, maintained, repaired, taken apart or tampered with by any person not authorised by us. · All service work under this guarantee must be undertaken by a Service Force Centre. Any appliance or defective part replaced shall become the Company’ s property .
36 France Senlis +33 (0)3 44 62 29 29 Germany Nürnber g +49 (0)800 234 7378 Italy Pordenone +39 (0)800 1 1751 1 Sweden S tockholm +46 (0)8 672 53 60 UK Slough +44 (0)1753 219899.
37.
38.
39.
40.
Een belangrijk punt na aankoop van elk apparaat AEG FM 2500DD-A (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen AEG FM 2500DD-A heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens AEG FM 2500DD-A vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding AEG FM 2500DD-A leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over AEG FM 2500DD-A krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van AEG FM 2500DD-A bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de AEG FM 2500DD-A kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met AEG FM 2500DD-A . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
