Gebruiksaanwijzing /service van het product 12416 van de fabrikant Cisco
Ga naar pagina of 416
Y ou'll be entered into a quarterly drawing for free Cisco Press books by returning this su rvey! Cisco is dedicated to customer satisfaction and would like to hear your thoughts on these prin ted manuals. Please visit the Ci sco Product Comments on-line sur vey at www .
BUSINESS REPLY MAIL FIRST-CLASS MAIL PERMIT NO. 4631 SAN JOSE CA POSTAGE WILL BE PAID BY ADDRESSEE NO POST A GE NECESSAR Y IF MAILED IN THE UNITED ST A TES DOCUMENT RESOURCE CONNECTION CISCO SYSTEMS I.
Corporate Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 USA http://www.cisco.com Tel: 408 526-4000 800 553-NETS (6387) Fax: 408 526-4100 Cisco 1 20 1 6, Cisco 1 241 6,.
THE SPECIFICA T IONS AND INFORM A TION REGARDIN G THE PRODUCTS IN THIS MAN U AL ARE SUBJECT TO CHANGE WITHOUT NO TICE. ALL ST A TEMENTS, INFORMA TION, AND RECOMMENDA TION S IN THIS MANU AL A RE BELIEVED TO BE A CCURA TE BUT ARE PRESENTED WITHOUT W ARRAN TY OF ANY KIN D, EXPRESS OR IMPLIED.
xiii Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 About This Guide Audience The Cisco 12016, Cisco 12416 , and Cisco 12816 Router Installatio n and Conf igur ation Guide is written for hardware instal lers and system administrators of Cisco routers.
About This Guide Document Organiza tion xiv Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Document Organization This installation and conf iguratio.
xv Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 About This Guide Document Co nventions Document Conventions This publicati on uses the follo wing con vention s: • Ctrl represents the key labeled Cont r ol .
About This Guide Obtaining Documentation xvi Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 T imesaver Means the described action saves time . Y ou can sav e time by performin g the action described in the paragr aph.
xvii Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 About This Guide Obtaining Documentation Product Documentation DVD Cisco documentation and add itional lite rature are a vailable in the Product Documentation D V D package, whi ch may ha ve shi pped with your p roduct.
About This Guide Documentation Fee dback xviii Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 • Instructions for ordering documentat ion using the Order ing tool are at this UR L: http://www .cisco .
xix Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 About This Guide Cisco Product Secu rity Overview A current list of security ad visories and not ices for Cisco produc ts is av ailabl e at this UR L: http://www .
About This Guide Obtaining Technical Assistance xx Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 The link on this pag e has the current PGP k ey ID in use. Obtaining Technical Assistance Cisco T echnical Support pro vides 24-hour-a-day a ward-winning technical assistance.
xxi Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 About This Guide Obtaining Te chnical Assistance Submitting a Service Request Using the online T A C Service Request T ool is the f astest way to open S3 and S4 service requests.
About This Guide Obtaining Additional Publ icat ions and Information xxii Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Se verity 3 (S3)—Oper ational perf ormance of your netw ork is impaired, b ut most b usiness operations remain functi onal .
xxiii Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 About This Guide Obtaining Additional Public ations and Information solv e them, using real-w orld case studies and b usiness strategies to help readers make sound technology in ves tment decisions.
About This Guide Obtaining Additional Publ icat ions and Information xxiv Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01.
iii Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 CONTENTS About This Guide xiii Audience xiii Purpose xiii Document Organization xiv Document Conventio ns xv Obtaining Documentation xvi Cisco.
Contents iv Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 AC Power Supplies 1-10 DC Power Shelf 1-12 DC Power Supplies 1-15 Chassis Card Cages 1-17.
v Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Contents PRP Reset Switch 1-37 PRP Alphanumeric Message Displays 1-38 PRP Memory Components 1-39 PR.
Contents vi Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Site Wiring Guidelines 2-24 GRP Port Connection Guidelines 2-25 GRP Auxiliary and Console.
vii Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Contents Connecting to th e Front Grounding Receptacle 3-22 Connecting to th e Top Rear Receptacl.
Contents viii Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Booting from the Cisco IOS Software Image 4-12 Configuring the Router 4-14 Cisco IOS Us.
ix Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Contents squeeze Command 4-51 Booting from Flash Memory 4-52 Copying Image Files to or From Flash .
Contents x Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Analyzing the Data 5-30 crc16 Output 5-30 Grant Parity and Request Errors 5-33 Properly Se.
xi Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Contents Removing and Installing the Front Covers and Bezel Extende rs on Original Cisco 12000 Ser.
Contents xii Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Removing and Replacing Cards from the Chass is 7-79 Removing and Replacing RP and Line C.
CH A P T E R 1-1 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 1 Product Overview This chap ter pro vides an o vervie w of the Cisco 1201 6, Cisco 12416, an d Cisco 12816 series routers.
Chapter 1 Product Overview Physical and Fu nctional Descrip tion of Router 1-2 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Physical and Functional Description of Router The Cisco 12000 series router chassis is a sheet-metal enclosure that houses router components.
1-3 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 1 Product Overview Physical and Functional De scription of Rou ter Figur e 1 -1 Cisco 120.
Chapter 1 Product Overview Physical and Fu nctional Descrip tion of Router 1-4 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 AC and DC Power Subsystems A router ships wi th either an A C or D C po wered syste m.
1-5 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 1 Product Overview Physical and Functional De scription of Rou ter Figur e 1 -2 Standa rd.
Chapter 1 Product Overview Physical and Fu nctional Descrip tion of Router 1-6 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 A C po wer to the rout er is pro vided through po wer cords connected f rom A C power outlets to connectors on back of the po wer shelf as sho w n in Figure 1-3 .
1-7 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 1 Product Overview Physical and Functional De scription of Rou ter Optional AC Power Shelf The po wer subsystem consists of a double-le vel A C-input po wer shelf with bays for 4 A C-input po wer supplies.
Chapter 1 Product Overview Physical and Fu nctional Descrip tion of Router 1-8 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Figur e 1 -4 Optional .
1-9 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 1 Product Overview Physical and Functional De scription of Rou ter A C po wer to the rout er is pro vided through po wer cords connected f rom A C po wer outlets to the connec tors on the back of the po wer shelf as shown in Figure 1-5 .
Chapter 1 Product Overview Physical and Fu nctional Descrip tion of Router 1-10 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 AC Power Supplies Each A C PEM con verts 200 to 24 0 V A C into -48 VDC, which is distrib uted through the chassis backpl ane to all cards, RPs, and the blower modules.
1-11 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 1 Product Overview Physical and Functional De scription of Rou ter Figure 1-7 identif ies the components of a 2500 W A C power supply .
Chapter 1 Product Overview Physical and Fu nctional Descrip tion of Router 1-12 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 • ILMI (yello w)—Indicates the PEM is operating in a current-limitin g condition.
1-13 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 1 Product Overview Physical and Functional De scription of Rou ter Figur e 1 -8 DC-Input.
Chapter 1 Product Overview Physical and Fu nctional Descrip tion of Router 1-14 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Figur e 1 -9 DC-Input.
1-15 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 1 Product Overview Physical and Functional De scription of Rou ter DC Power Supplies Each DC PEM operates from a nominal so urce DC voltage of –48 t o –60 VDC and requires a de dicated 60 amp se rvice.
Chapter 1 Product Overview Physical and Fu nctional Descrip tion of Router 1-16 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Figure 1-11 identif ies the components of a 2400 W DC po wer supply .
1-17 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 1 Product Overview Chassis Card Cages For add itional informati on about troubl eshooting DC PEMs, see the “T roub leshooting th e DC-Input Power Subsystem” section on page 5-10 .
Chapter 1 Product Overview Chassis Card Cages 1-18 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Lower Card Cage The lower card cage also has eight user -con figurable slots th at support add itional line cards, an alarm card, and an optional, redundant RP .
1-19 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 1 Product Overview Switch Fabric Overview Switch Fabric Overview The switch fabric provides synchronized gigabit-speed connections between line cards and the RP .
Chapter 1 Product Overview Switch Fabric Overview 1-20 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 The router also ships with a blank switch fabric card installed in the far left (non-work ing) slot of the switch f abric card cage.
1-21 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 1 Product Overview Alarm Card, Line Card, and Rout Processor Overview Alarm Card, Line C.
Chapter 1 Product Overview Alarm Card, Line Card, and Rout Processor Overview 1-22 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Some of the f unctions that the alarm cards pro vide are: • Supplies +5 VDC to the MBus modules on rou ter components (see AC a n d DC Po wer Subsystems, page 1-4 ).
1-23 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 1 Product Overview Alarm Card, Line Card, and Rout Processor Overview Figur e 1 -12 Alar.
Chapter 1 Product Overview Alarm Card, Line Card, and Rout Processor Overview 1-24 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Route Processor Selection T wo types of RPs are a v ailable: a Gigabit Route Processor (GRP) or a Performance Route Processor (PRP).
1-25 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 1 Product Overview Alarm Card, Line Card, and Rout Processor Overview Figur e 1 -13 Giga.
Chapter 1 Product Overview Alarm Card, Line Card, and Rout Processor Overview 1-26 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Figur e 1 -14 Slot.
1-27 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 1 Product Overview Alarm Card, Line Card, and Rout Processor Overview GRP Reset Switch Access to th e (soft) r eset switch is through a sm all openi ng in the GRP f ront pane l.
Chapter 1 Product Overview Alarm Card, Line Card, and Rout Processor Overview 1-28 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 GRP Auxiliary and Console Ports The auxiliary and co nsole ports on t he GRP are EIA/TIA-23 2 (also kno wn as RS-232) asynchronous serial ports.
1-29 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 1 Product Overview Alarm Card, Line Card, and Rout Processor Overview The transmission speed of the Ethernet po rt is not user -configurable.
Chapter 1 Product Overview Alarm Card, Line Card, and Rout Processor Overview 1-30 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 GRP Alphanumeric Message Displays The alphanumeric message displays are or ganized in two r ows of four LED characters ( Figure 1-16 ).
1-31 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 1 Product Overview Alarm Card, Line Card, and Rout Processor Overview GRP Memory Components This section describes v arious types of memory used on the GRP to support router functions.
Chapter 1 Product Overview Alarm Card, Line Card, and Rout Processor Overview 1-32 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Figur e 1 -1 7 GRP.
1-33 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 1 Product Overview Alarm Card, Line Card, and Rout Processor Overview GRP DRAM The GRP u.
Chapter 1 Product Overview Alarm Card, Line Card, and Rout Processor Overview 1-34 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 GRP Flash Memory Use flash memory to sto re multiple Cisco IOS software and mi crocode images that you can use to operate the router .
1-35 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 1 Product Overview Alarm Card, Line Card, and Rout Processor Overview PRP PCMCIA Card Slots and Status LEDs T wo PCMCIA card slots (slot 0 and slot 1) pro vide the PRP w ith additional flash memory capacity .
Chapter 1 Product Overview Alarm Card, Line Card, and Rout Processor Overview 1-36 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 The follo wing LED.
1-37 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 1 Product Overview Alarm Card, Line Card, and Rout Processor Overview PRP Reset Switch Access to the (soft) reset switch is throug h a small open ing in the PRP front panel (see Figure 1-18 ).
Chapter 1 Product Overview Alarm Card, Line Card, and Rout Processor Overview 1-38 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 PRP Alphanumeric Message Displays The alphanumeric message displays are or ganized in two r ows of four LED characters each ( Figure 1-20 ).
1-39 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 1 Product Overview Alarm Card, Line Card, and Rout Processor Overview PRP Memory Components This section describes v arious types of memory used on the PRP to suppor t router functions.
Chapter 1 Product Overview Alarm Card, Line Card, and Rout Processor Overview 1-40 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Figur e 1 -21 PRP .
1-41 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 1 Product Overview Alarm Card, Line Card, and Rout Processor Overview PRP SDRAM The PRP .
Chapter 1 Product Overview Alarm Card, Line Card, and Rout Processor Overview 1-42 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 PRP NVRAM Non-v ol.
1-43 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 1 Product Overview Alarm Card, Line Card, and Rout Processor Overview Upper and Lower Ca.
Chapter 1 Product Overview Blower Module 1-44 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Blower Module The router has two blo wer modules to distri b ute air within the chassis.
1-45 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 1 Product Overview Blower Module Figur e 1- 2 3 C o o l i n g A i r F l o w T o ensure that th ere is adequate air flo w to pre vent ov erheating inside the card cages keep the front and back of the rout er uno bstructed.
Chapter 1 Product Overview Blower Module 1-46 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Caution Y ou should inspect an d clean the air f ilter one time per month (more often in dusty en vironments).
CH A P T E R 2-1 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 2 Preparing for Installation Before installing your rout er , consider po wer and ca.
Chapter 2 Prep aring for Installation Safety Guidelines 2-2 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Safety Guidelines Before you perform an y procedure in this public ation, re view the safety guidelines in th is section to a void injurin g yourself or damaging the equi pment.
2-3 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 2 Preparing for Installation Safety Guidelines Safety with Electricity • The installati.
Chapter 2 Prep aring for Installation Safety Guidelines 2-4 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Preventing Electrostatic Discharge Damage Many router components can b e damaged b y static electricity .
2-5 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 2 Preparing for Installation Safety Guidelines Figur e 2-1 Connectin g an ESD-Pr eventive.
Chapter 2 Prep aring for Installation Safety Guidelines 2-6 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Lifting Guidelines A fully conf igured router can weigh as much as 275 pounds (lb ) (124.74 kilo grams (kg)), whi le an empty chassi s weighs 125 lb (56.
2-7 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 2 Preparing for Installation Site Requirem ent Guidelines Laser Safety Some line cards are equipped w ith ports that can emit h azardous laser radiation from the ap erture when th ere is no ca ble connected to the po rt.
Chapter 2 Prep aring for Installation Site Requirement Guidelines 2-8 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Figur e 2-2 Equ ipment Rac k T ypes Enclosed Rack Figure 2-2 a sho ws a free-standing, en closed rack with two mou nting posts in the front.
2-9 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 2 Preparing for Installation Site Requirem ent Guidelines Telco Rack Figure 2-2 c sho ws a telco-type rack.
Chapter 2 Prep aring for Installation Site Requirement Guidelines 2-10 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Figur e 2-3 F ront-Mou nted an.
2-11 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 2 Preparing for Installation Site Requirem ent Guidelines Site Layout and Equipment Dime.
Chapter 2 Prep aring for Installation Site Requirement Guidelines 2-12 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 • Install the cable-management brackets incl uded with the route r to keep cables organized.
2-13 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 2 Preparing for Installation Site Requirem ent Guidelines Figur e 2-4 Router Chassis Footpr int and D imensions—T op View) 17.3 in. 18.75 in.
Chapter 2 Prep aring for Installation Site Requirement Guidelines 2-14 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Figure 2-5 sho ws the footprint and outer dimensions of the enhanced version of router chassis.
2-15 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 2 Preparing for Installation Site Requirem ent Guidelines Air Flow Guidelines Cool air is circulated through the rout er chassis by two blo wer modules.
Chapter 2 Prep aring for Installation Site Requirement Guidelines 2-16 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Figur e 2-6 Air Flo w P ath th.
2-17 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 2 Preparing for Installation Site Requirem ent Guidelines Temperature and Humidity Guidelines The operating and nonoperating en vironmen tal site requirements are list ed in Ta b l e A-4 on page A-4 .
Chapter 2 Prep aring for Installation Site Requirement Guidelines 2-18 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 AC-Powered Routers A C PEMs op.
2-19 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 2 Preparing for Installation Site Requirem ent Guidelines Ta b l e 2-1 lists po wer cord options. All A C-input po wer supply pow er cords measure 14 feet (4.
Chapter 2 Prep aring for Installation Site Requirement Guidelines 2-20 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Y ou must terminate DC power cables usin g cable lugs at the po w er shelf end. Ensure the lug s are dual -hole and th at the y are able to fit over M6 termin al studs at 0.
2-21 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 2 Preparing for Installation Site Requirem ent Guidelines Figur e 2-9 T ypical Sour ce D.
Chapter 2 Prep aring for Installation Site Requirement Guidelines 2-22 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Caution DC PEMs contains circui try to trip th e breaker on the PEM if the P EM detects a re verse polarity conditi on.
2-23 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 2 Preparing for Installation Site Requirem ent Guidelines Figur e 2-1 0 Rout er Bonding .
Chapter 2 Prep aring for Installation Site Requirement Guidelines 2-24 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 T o ensure a satisfactory supp.
2-25 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 2 Preparing for Installation GRP Port Connectio n Guidelines Site wiring is unlik ely to emit radio inte rference if you use twisted-pair cable with a good distrib ution of grounding conductors.
Chapter 2 Prep aring for Installation GRP Port Connection Guidelines 2-26 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 GRP Auxiliary and Console P.
2-27 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 2 Preparing for Installation GRP Port Connectio n Guidelines Caution T o maintain Class B EMI compliance, you must use shielded cables when connecting to the auxiliar y and console ports of or iginal GRPs (part nu mbers GRP= and GRP-B=).
Chapter 2 Prep aring for Installation GRP Port Connection Guidelines 2-28 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 GRP Console Port Signals The GRP console port is a DB-25 DCE in terface for connecting a DTE terminal de vice to the router .
2-29 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 2 Preparing for Installation GRP Port Connectio n Guidelines GRP Ethernet Port Connectio.
Chapter 2 Prep aring for Installation GRP Port Connection Guidelines 2-30 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 The GRP Ethernet port does no t prov ide ex ternal routing fu nctions.
2-31 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 2 Preparing for Installation GRP Port Connectio n Guidelines GRP RJ-45 Ethernet Connections The RJ-45 Ethernet connecti on does not require an external tr anscei ver .
Chapter 2 Prep aring for Installation GRP Port Connection Guidelines 2-32 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 When connecting the RJ-45 port to a hub or rep eater , use the straight-through cable pinout sho wn in Figure 2-16 .
2-33 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 2 Preparing for Installation GRP Port Connectio n Guidelines GRP MII Ethernet Connection.
Chapter 2 Prep aring for Installation GRP Port Connection Guidelines 2-34 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Ta b l e 2-5 lists the signals used on the MII connector . Ta b l e 2-5 GRP M II Ethernet Pinout Pin 1 1 .
2-35 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 2 Preparing for Installation GRP Port Connectio n Guidelines Ta b l e 2-6 lists the cablin g specif ications for 100-Mbps tr ansmission o ver unshielded twisted-pair (UTP) cables.
Chapter 2 Prep aring for Installation PRP Port Connection Guidelines 2-36 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 PRP Port Connection Guidelines This section con tains detailed cabling an d signal information for all interf ace and port connections to the PRP .
2-37 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 2 Preparing for Installation PRP Port Connectio n Guidelines Figur e 2-1 9 PRP A uxiliar.
Chapter 2 Prep aring for Installation PRP Port Connection Guidelines 2-38 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 PRP Auxiliary Port Signals The PRP auxiliary port is a DTE, RJ-45 interface for connectin g a modem or other DCE de vice (such as a CSU/DSU or another ro uter) to the PRP .
2-39 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 2 Preparing for Installation PRP Port Connectio n Guidelines PRP Console Port Signals The PRP console port is a DCE RJ-45 interf ace for connecting a terminal to the router .
Chapter 2 Prep aring for Installation PRP Port Connection Guidelines 2-40 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 PRP Ethernet Connections The PRP has two RJ-45 MDI Ethe rnet ports; ETH0 and ETH1 ( Figure 2-20 ).
2-41 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 2 Preparing for Installation PRP Port Connectio n Guidelines Figure 2-21 sho ws: • Y ou cannot access Netw ork 2.0.0.0 from Ethernet port (E0) on the GRP in Router A.
Chapter 2 Prep aring for Installation PRP Port Connection Guidelines 2-42 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 PRP RJ-45 Ethernet Connections The RJ-45 Ethernet connecti on does not require an external tr anscei ver .
2-43 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 2 Preparing for Installation PRP Port Connectio n Guidelines When connecting the RJ-45 port to a hub or rep eater , use the straight-through cable pinout sho wn in Figure 2-23 .
Chapter 2 Prep aring for Installation PRP Port Connection Guidelines 2-44 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Ta b l e 2-11 lists the cabli ng specif ications for 100-Mbps transmission o ve r unshielded twisted-pair (UTP) cables.
2-45 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 2 Preparing for Installation Alarm Card Connectio n Guidelines Alarm Card Connection Gui.
Chapter 2 Prep aring for Installation Alarm Card Connectio n Guidelines 2-46 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Note T o comply with the.
CH A P T E R 3-1 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 3 Installing the Router This chapter contains the proc edures to install th e router in a rack.
Chapter 3 In stalling the Router Pre-Installation Consideration s and Requirements 3-2 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Pre-Installati.
3-3 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 3 Installing the Router Pre-Installation Consider a tions and Requirements Required Tools.
Chapter 3 In stalling the Router Pre-Installation Consideration s and Requirements 3-4 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Removing the F.
3-5 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 3 Installing the Router Pre-Installation Consider a tions and Requirements Figur e 3-1 Ro.
Chapter 3 In stalling the Router Pre-Installation Consideration s and Requirements 3-6 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Removing the Front Cover from Cisco 12016 Enhanced Series Routers The ne w cover on the Cisco enhanced series of routers has a tw o-piece front co ver .
3-7 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 3 Installing the Router Pre-Installation Consider a tions and Requirements Figur e 3-2 Re.
Chapter 3 In stalling the Router Rack-Mounting the Ro uter Chassis 3-8 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Rack-Mounting the Router Chassis The router chassis can be installed in either a front-mounted position or a center -mounted position.
3-9 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 3 Installing the Router Rack-Mounting the Router Chassis Figur e 3-3 V er ifying Equipmen.
Chapter 3 In stalling the Router Rack-Mounting the Ro uter Chassis 3-10 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Step 1 Determine the location in which you want to position the chassi s in the rack, and mark holes at the same height on both the left and right rack rails.
3-11 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 3 Installing the Router Rack-Mounting the Router Chassis b. Finger -tighten a second scre w in the top hole of the bracket. c. Finger -tighten three more scre ws in the middle of in the bracket.
Chapter 3 In stalling the Router Rack-Mounting the Ro uter Chassis 3-12 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Figur e 3-5 Installi ng a Cen.
3-13 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 3 Installing the Router Rack-Mounting the Router Chassis Installing the Chassis Rack-Mounting Platform The rack-mounting plat form is installed at the bo ttom of an empty rack and acts as a permanent support platfo rm for the chassis.
Chapter 3 In stalling the Router Rack-Mounting the Ro uter Chassis 3-14 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Repeat these steps to at tach a brack et in the same position on the oth er side of the platform.
3-15 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 3 Installing the Router Rack-Mounting the Router Chassis Unpack and Position the Router .
Chapter 3 In stalling the Router Rack-Mounting the Ro uter Chassis 3-16 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Installing the Chassis into the Rack Use the fo llowing procedure to i nstall the c hassis in th e rack.
3-17 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 3 Installing the Router Rack-Mounting the Router Chassis Step 2 Remo ve the fou r bolts and chassis anchor c lips that secure the base of the chassis to the scissor-jack platform ( Figur e 3-9 ).
Chapter 3 In stalling the Router Rack-Mounting the Ro uter Chassis 3-18 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Step 3 Grasp the hand le on t.
3-19 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 3 Installing the Router Rack-Mounting the Router Chassis Step 4 Insert the chassis in to.
Chapter 3 In stalling the Router Rack-Mounting the Ro uter Chassis 3-20 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Figur e 3-1 1 Chassis R ack -.
3-21 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 3 Installing the Router Supplemental Bon ding and Grounding Co nnections Supplemental Bo.
Chapter 3 In stalling the Router Supplemental B onding and G rounding Connec tions 3-22 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Connecting to the Front Grounding Receptacle Use the follo wing procedure to connect the supplemental gro unding cable to front grounding receptacle.
3-23 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 3 Installing the Router Supplemental Bon ding and Grounding Co nnections Step 2 Attach the grounding ca ble to the chassis ( Figure 3-13 ): a.
Chapter 3 In stalling the Router Supplemental B onding and G rounding Connec tions 3-24 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Connecting to the Top Rear Receptacle Use the follo wing procedure to connect the supplemental groundin g cable to to p rear grounding receptacle.
3-25 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 3 Installing the Router Attaching the Vertical Cab le-Management Trough Attaching the Vertical Cable-Management Trough Refer t o Figure 3-15 and use the fol lo wing proced ure to attach the vertical cable-management trough.
Chapter 3 In stalling the Router Attaching the Ver tical Cable-Man agement Trough 3-26 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Figur e 3-15 A.
3-27 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 3 Installing the Router Connecting Line Card Network In terface Ca bles Connecting Line .
Chapter 3 In stalling the Router Connecting Line Car d Network Inter face Cables 3-28 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Step 5 Repeat Steps 3 t hrough 5 for each ad ditional cable connecti on to that line card.
3-29 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 3 Installing the Router Connecting Line Card Network In terface Ca bles Step 6 Insert all cables into their assigned ports.
Chapter 3 In stalling the Router Connecting Line Car d Network Inter face Cables 3-30 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Figur e 3-1 7 C.
3-31 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 3 Installing the Router Connecting GRP Route Processor Cables Connecting GRP Route Processor Cables This section de scribes ho w to connect cables to the console, aux iliary , and Ethernet ports on the GRP .
Chapter 3 In stalling the Router Connecting GRP Route Processor Cables 3-32 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Note T o comply with T el.
3-33 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 3 Installing the Router Connecting GRP Route Processor Cables Connecting to the GRP Auxi.
Chapter 3 In stalling the Router Connecting GRP Route Processor Cables 3-34 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 LEDs on the front panel i ndicate wh ich Etherne t receptacle is activ e when the GRP is operating.
3-35 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 3 Installing the Router Connecting GRP Route Processor Cables RJ-45 Connection Use the follo wing procedure to connect an Ethernet cabl e to the RJ-45 receptacle.
Chapter 3 In stalling the Router Connecting PRP Route Processor Cables 3-36 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Connecting PRP Route Processor Cables This section de scribes ho w to connect cables to the console, aux iliary , and Ethernet ports on the PRP .
3-37 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 3 Installing the Router Connecting PRP Route Processor Cables Note RP cables are not av ailable from Cisco, but are av ailable from any commercial cable vendor .
Chapter 3 In stalling the Router Connecting PRP Route Processor Cables 3-38 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Connecting to the PRP Aux.
3-39 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 3 Installing the Router Connecting PRP Route Processor Cables Note RJ-45 cables are not a v ailable fr om Ci sco Systems; they are a vailable from outside commercial cable vendors.
Chapter 3 In stalling the Router Connecting an A larm Card Cable 3-40 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Connecting an Alarm Card Cable Each router alarm card has one 25-pin Dsub connector , labeled Alarm ( Figure 3-21 ).
3-41 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 3 Installing the Router Connecting Pow er to the Power Shelf Caution Only safety extra-lo w voltage (SEL V) ci rcuits can be connecte d to the alarm connector .
Chapter 3 In stalling the Router Connecting Power to the Power Shelf 3-42 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Step 1 Connect each A C power cord to the back pa nel of the power shelf and secure them in place w ith their re tention clips ( Figure 3-22 ).
3-43 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 3 Installing the Router Connecting Pow er to the Power Shelf Because there is no color c.
Chapter 3 In stalling the Router Connecting Power to the Power Shelf 3-44 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Figur e 3-23 DC-Input T er .
3-45 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 3 Installing the Router Connecting Pow er to the Power Shelf Step 2 Connect th e ground .
Chapter 3 In stalling the Router Connecting Power to the Power Shelf 3-46 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Step 3 Reins tall the p o wer cable co ver ( Figure 3-25 ).
3-47 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 3 Installing the Router Installing the Front Covers of Ci sco 12016 Original Series Rout.
Chapter 3 In stalling the Router Installing the Front Co vers of Cisco 12016 Original Series Routers 3-48 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-1149.
3-49 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 3 Installing the Router Installing the Front Cover of Cisco 12010 Enhanced Series Ro ute.
Chapter 3 In stalling the Router Installing the Front Co ver of Cisco 12010 Enhanced Series Routers 3-50 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495.
3-51 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 3 Installing the Router Installing the Front Cover of Cisco 12010 Enhanced Series Ro uters This completes the hardw are installation procedures for Cisco 12016, Cisco 12416, and Ci sco 12816 routers.
Chapter 3 In stalling the Router Installing the Front Co ver of Cisco 12010 Enhanced Series Routers 3-52 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495.
CH A P T E R 4-1 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 4 System Startup and Basic Configuration The system startup pro cess and a procedure.
Chapter 4 Syste m Startup and Ba sic Configuration Sources of Cisco IOS Softw are 4-2 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 This chapter p .
4-3 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 4 System Startup and Basic Configuratio n Boot P rocess O vervie w • A terminal de vice is connected to the console po rt on the RP , po wered on, and conf igured for 9600 bps, 8 data bi ts, no parity , and 2 stop bits (9600, 8N2).
Chapter 4 Syste m Startup and Ba sic Configuration Powering On the Router and Observing the Boot Process 4-4 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 7.
4-5 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 4 System Startup and Basic Configuratio n Powering On the Rou ter and Observin g the Boot Process Step 4 Observ e the RP alphanumeric LED di splays during the RP boot pr ocess ( Figure 4-1 ).
Chapter 4 Syste m Startup and Ba sic Configuration Powering On the Router and Observing the Boot Process 4-6 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Step 5 Observe the status of the RP interfaces (see Figure 4-2 for the GRP and Figure 4-3 for the PRP).
4-7 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 4 System Startup and Basic Configuratio n Powering On the Rou ter and Observin g the Boot.
Chapter 4 Syste m Startup and Ba sic Configuration Powering On the Router and Observing the Boot Process 4-8 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Step 6 During the line card boot process, observ e the alphanumeric LED displays on each line card ( Figure 4-4 ).
4-9 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 4 System Startup and Basic Configuratio n Powering On the Rou ter and Observin g the Boot Process RO M I GET The R OM image is being loaded into l ine card memory .
Chapter 4 Syste m Startup and Ba sic Configuration Powering On the Router and Observing the Boot Process 4-10 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-.
4-11 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 4 System Startup and Basic Configuratio n Manually Booting the System Y ou do not need t.
Chapter 4 Syste m Startup and Ba sic Configuration Manually Booting th e System 4-12 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Locating a Valid.
4-13 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 4 System Startup and Basic Configuratio n Manually Booting the System Caution Use the boot flash command with care.
Chapter 4 Syste m Startup and Ba sic Configuration Configuring the Router 4-14 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Note If you did not ch ange the conf iguration re gister setting, the ne xt reload will re vert to the def ault conf iguration regi ster setting (0x0102).
4-15 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 4 System Startup and Basic Configuratio n Cisco IOS User Interface Y ou can use the method t hat suits your operating sty le and your kno wledge of network conf iguration requirements.
Chapter 4 Syste m Startup and Ba sic Configuration Cisco IOS User Interface 4-16 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 The conf iguration modes allo w you to make changes to the run ning conf iguration f ile.
4-17 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 4 System Startup and Basic Configuratio n Cisco IOS User Interface The follo wing example sh ow s the change from user EXEC mode to pri vile ged EXEC mode.
Chapter 4 Syste m Startup and Ba sic Configuration Cisco IOS User Interface 4-18 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Subinterface Configu.
4-19 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 4 System Startup and Basic Configuratio n Cisco IOS User Interface T o use the setup command to change a conf iguration: 1.
Chapter 4 Syste m Startup and Ba sic Configuration Cisco IOS User Interface 4-20 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 to configure each interface of the system.
4-21 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 4 System Startup and Basic Configuratio n Cisco IOS User Interface line vty 0 4 password bambam no snmp server ! no ip routing ! interface Ethernet0 no shutdown ip address 172.
Chapter 4 Syste m Startup and Ba sic Configuration Cisco IOS User Interface 4-22 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 For e xample, during.
4-23 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 4 System Startup and Basic Configuratio n Cisco IOS User Interface Configuring Host Name The host name you conf igure your router with must: • Foll o w the rules for ARP ANET host names.
Chapter 4 Syste m Startup and Ba sic Configuration Cisco IOS User Interface 4-24 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 In either case, you cannot use a number as the first character . Spaces, howe ver , are v a lid password characters.
4-25 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 4 System Startup and Basic Configuratio n Cisco IOS User Interface The follo wing conf iguration dialog e xample shows h o w to conf igure the system for an Ethernet interf ace that uses the IP netw ork layer protocol.
Chapter 4 Syste m Startup and Ba sic Configuration Cisco IOS User Interface 4-26 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 The follo wing example sh o ws ho w to configu re an A TM line card to use IP .
4-27 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 4 System Startup and Basic Configuratio n Cisco IOS User Interface System image file is "tftp://xxx.xxx.xxx.xxx/directory/ghall/gsr-p-mz" cisco 12410/GRP (R5000) processor (revision 0x05) with 262144K bytes of memory.
Chapter 4 Syste m Startup and Ba sic Configuration Cisco IOS User Interface 4-28 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Step 3 Enter the conf igure terminal comman d to enter global conf iguration mode.
4-29 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 4 System Startup and Basic Configuratio n Cisco IOS User Interface clock source internal.
Chapter 4 Syste m Startup and Ba sic Configuration Cisco IOS User Interface 4-30 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Viewing the Running Configuration Settings Y ou can use the sho w startup-config command to vie w the current conf iguration settings stored in NVRAM.
4-31 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 4 System Startup and Basic Configuratio n Configuring the Software Configura tion Register ! map-list atm1 ip 10.1.1.1 atm-vc 1 ip 10.1.1.3 atm-vc 2 ip 10.
Chapter 4 Syste m Startup and Ba sic Configuration Configuring the Software Configuration Register 4-32 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 • Read boot system commands from the conf iguration f ile stored in NVRAM.
4-33 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 4 System Startup and Basic Configuratio n Configuring the Software Configura tion Register The boot f ield ( Ta b l e 4-5 ) defi nes a source for booting a def ault Cisco IOS software i mage required t o run the rout er .
Chapter 4 Syste m Startup and Ba sic Configuration Configuring the Software Configuration Register 4-34 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-.
4-35 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 4 System Startup and Basic Configuratio n Configuring the Software Configura tion Register For e xample, the filename f ormation process may yiel d a range of typical f ilenames like the follo wing: cisco2-grp .
Chapter 4 Syste m Startup and Ba sic Configuration Configuring the Software Configuration Register 4-36 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-.
4-37 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 4 System Startup and Basic Configuratio n Configuring the Software Configura tion Regist.
Chapter 4 Syste m Startup and Ba sic Configuration Configuring the Software Configuration Register 4-38 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-.
4-39 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 4 System Startup and Basic Configuratio n Configuring the Software Configura tion Regist.
Chapter 4 Syste m Startup and Ba sic Configuration Configuring the Software Configuration Register 4-40 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 • Bits 11 and 12 of the softw are config uration r egister determine the data transmission rate of the console terminal.
4-41 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 4 System Startup and Basic Configuratio n Recovering a Lost Password Recovering a Lost Password Use the follo wing procedure to reco ver a lo st password.
Chapter 4 Syste m Startup and Ba sic Configuration Recovering a Lost Password 4-42 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 enable “use net .
4-43 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 4 System Startup and Basic Configuratio n Recovering a Lost Password Step 7 Enter the enable command an d password (if prompted).
Chapter 4 Syste m Startup and Ba sic Configuration Using RP Flash Memory Cards 4-44 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Using RP Flash Me.
4-45 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 4 System Startup and Basic Configuratio n Using RP Flash Memory Cards Step 3 Insert the card i nto the appropriate slo t until the card completely seats in the connector and the ejector button pops out (see Figure 4-5 b) .
Chapter 4 Syste m Startup and Ba sic Configuration Using RP Flash Memory Cards 4-46 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Figur e 4-5 Insta.
4-47 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 4 System Startup and Basic Configuratio n Using RP Flash Memory Cards Formatting a New Flash Memory Card The flash memory card that shipped wi th your router contai ns the defa ult Cisco IOS software i mage you need to boot your rout er .
Chapter 4 Syste m Startup and Ba sic Configuration Using RP Flash Memory Cards 4-48 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Specifying a Cisco IOS Software Image to Boot the System Use the procedure in this section to identi fy a specif ic Cisco IOS software image ( new .
4-49 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 4 System Startup and Basic Configuratio n Using RP Flash Memory Cards Flash Memory Commands This section d escribes console commands th at you can use to access the different types of flash memori es.
Chapter 4 Syste m Startup and Ba sic Configuration Using RP Flash Memory Cards 4-50 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 dir Command T o list the directory cont ents of the flash memo ry in use, enter the dir [ device-name ] command.
4-51 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 4 System Startup and Basic Configuratio n Using RP Flash Memory Cards squeeze Command Th.
Chapter 4 Syste m Startup and Ba sic Configuration Using RP Flash Memory Cards 4-52 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Booting from Flas.
4-53 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 4 System Startup and Basic Configuratio n Using RP Flash Memory Cards Use the follo wing command to copy a f ile to flash memory .
Chapter 4 Syste m Startup and Ba sic Configuration Using RP Flash Memory Cards 4-54 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 CCCCCCCCCCCCCCCCC.
4-55 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 4 System Startup and Basic Configuratio n Using RP Flash Memory Cards Use the follo wing procedure to c opy a boot able image into the flash memory card: Step 1 Boot the r outer .
Chapter 4 Syste m Startup and Ba sic Configuration Using RP Flash Memory Cards 4-56 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Copying Cisco IOS.
4-57 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 4 System Startup and Basic Configuratio n Using RP Flash Memory Cards Step 3 Enter the follo wing commands to designate the f ile named im age.
Chapter 4 Syste m Startup and Ba sic Configuration Using RP Flash Memory Cards 4-58 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Copying the Start.
4-59 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 4 System Startup and Basic Configuratio n Using RP Flash Memory Cards Milo# copy startup-config slot0:myfile2 20575008 bytes available on device slot0, proceed? [confirm] Address or name of remote host [1.
Chapter 4 Syste m Startup and Ba sic Configuration Using RP Flash Memory Cards 4-60 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Copying the Runni.
4-61 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 4 System Startup and Basic Configuratio n Using RP Flash Memory Cards Step 2 Enter the d.
Chapter 4 Syste m Startup and Ba sic Configuration Using RP Flash Memory Cards 4-62 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Booting a New Cis.
4-63 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 4 System Startup and Basic Configuratio n Post-Installation Procedures Post-Installation.
Chapter 4 Syste m Startup and Ba sic Configuration Post-Installation Procedures 4-64 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01.
CH A P T E R 5-1 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 5 Troubleshooting the Installation This chapter con tains general troubl eshooting in formation to help i solate the cause of dif ficulties y ou might encount er during the installation and initial startup of the system.
Chapter 5 Troublesho oting the Installation Troublesh ooting Ov erview 5-2 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Troubleshooting Overview This section de scribes the methods used in t roubleshooting the router .
5-3 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 5 Troubleshooting th e Installation Troubleshooting Ove rview • Chassis backplane po wer distrib ution. –48 VDC po wer from the po wer supplies is transfer red to the cha ssis back plane.
Chapter 5 Troublesho oting the Installation Troublesh ooting Ov erview 5-4 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Identifying Startup Issues.
5-5 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 5 Troubleshooting th e Installation Troubleshooting the Powe r Subsystem Troubleshooting .
Chapter 5 Troublesho oting the Installation Troublesh ooting the Power Su bsystem 5-6 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Troubleshooting.
5-7 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 5 Troubleshooting th e Installation Troubleshooting the Powe r Subsystem Figur e 5-2 250 .
Chapter 5 Troublesho oting the Installation Troublesh ooting the Power Su bsystem 5-8 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Step 2 Make sur.
5-9 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 5 Troubleshooting th e Installation Troubleshooting the Powe r Subsystem • TEMP (flashing yello w—2500 W PEM only )—Indicates that a po wer supply fan is l ocked or malf unctioning.
Chapter 5 Troublesho oting the Installation Troublesh ooting the Power Su bsystem 5-10 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Troubleshootin.
5-11 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 5 Troubleshooting th e Installation Troubleshooting the Powe r Subsystem Figur e 5-4 240.
Chapter 5 Troublesho oting the Installation Troublesh ooting the Power Su bsystem 5-12 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Use the follo wing procedure to troublesh oot the DC PEM if it is not operating properly after inst allation.
5-13 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 5 Troubleshooting th e Installation Troubleshooting the Powe r Subsystem • TEMP (yello w)—Indicates th at the PEM is in an ov ertemperature condition causing a shut-do w n to occur .
Chapter 5 Troublesho oting the Installation Troublesh ooting the Power Su bsystem 5-14 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Additional Pow.
5-15 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 5 Troubleshooting th e Installation Troubleshooting the Powe r Subsystem 16 3300 NA 5064.
Chapter 5 Troublesho oting the Installation Troublesh ooting the Power Su bsystem 5-16 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Use the follo wing procedure to troublesh oot the po wer distrib ution system.
5-17 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 5 Troubleshooting th e Installation Troubleshooting the Processor Subsystem Troubleshooting the Processor Subsystem The router processor subsystem consi sts of the RPs, line cards, and alarm cards.
Chapter 5 Troublesho oting the Installation Troubleshooting the Pr ocessor Subsystem 5-18 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Troubleshoo.
5-19 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 5 Troubleshooting th e Installation Troubleshooting the Processor Subsystem Troubleshooting Using the RP Alphanumeric Display Y ou can use the alphan umeric display to i solate a problem wit h the RP .
Chapter 5 Troublesho oting the Installation Troubleshooting the Pr ocessor Subsystem 5-20 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Troubleshoo.
5-21 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 5 Troubleshooting th e Installation Troubleshooting the Processor Subsystem • Upper ro w—Indicates which software com ponent is runnin g.
Chapter 5 Troublesho oting the Installation Troubleshooting the Pr ocessor Subsystem 5-22 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Troubleshooting Using the Line Card Alphanumeric Display Y ou can analyze the alphanume ric displays to isolat e a problem with the line card.
5-23 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 5 Troubleshooting th e Installation Troubleshooting the Processor Subsystem RST SA VE Contents of the reset reason register are being sav ed.
Chapter 5 Troublesho oting the Installation Troubleshooting the Pr ocessor Subsystem 5-24 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 IOS FA B W 3 Cisco IOS software is w aiting for the fabric to be ready .
5-25 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 5 Troubleshooting th e Installation Troubleshooting the Processor Subsystem RSET DONE System rese t complete . RP MBUS DNLD MBus agent is do w nloading.
Chapter 5 Troublesho oting the Installation Troubleshooting the Pr ocessor Subsystem 5-26 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 DIA G MODE Diagnostic mode. RP DIA G LO AD Do wnloading field diagnostics o ver the MBus.
5-27 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 5 Troubleshooting th e Installation Troubleshooting the Processor Subsystem Troubleshooting Using the Alarm Cards The router is equipped with two al arm cards: • One card occupies the dedicated far left slot of the upper card cage.
Chapter 5 Troublesho oting the Installation Troubleshooting the Pr ocessor Subsystem 5-28 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Figur e 5-7.
5-29 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 5 Troubleshooting th e Installation Troubleshooting the Switch Fabric Note Y ou can use the audio alarm cutoff switch to visually check that the alarm card indicators ar e operating properl y .
Chapter 5 Troublesho oting the Installation Troublesh ooting the Switch Fabr ic 5-30 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Step 3 Enter the sho w controller s f ia command for all installed lin e cards and sa ve the output from each.
5-31 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 5 Troubleshooting th e Installation Troubleshooting the Switch Fabric Router# show contr.
Chapter 5 Troublesho oting the Installation Troublesh ooting the Switch Fabr ic 5-32 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 To Fabric FIA Er.
5-33 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 5 Troubleshooting th e Installation Troubleshooting the Switch Fabric The common failu re patterns and recommend ed actions for crc16 errors are as follo ws (one step at a time until the problem goes a way): 1.
Chapter 5 Troublesho oting the Installation Troublesh ooting the Switch Fabr ic 5-34 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 -------- -------.
5-35 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 5 Troubleshooting th e Installation Troubleshooting the Switch Fabric Properly Seating Switch Fabric Cards The switch fabric cards in the router can be challenging to insert, and may requ ire a small amount of force to seat correctly .
Chapter 5 Troublesho oting the Installation Troubleshooting the Cooli ng Subsystem 5-36 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 1 Clock Scheduler Card 3 Switch Fabric Cards 1 8-port OC3 POS controller (8 POs).
5-37 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 5 Troubleshooting th e Installation Troubleshooting the Cooling Subsystem Figur e 5-8 Co.
Chapter 5 Troublesho oting the Installation Troubleshooting the Cooli ng Subsystem 5-38 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Blower Module.
5-39 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 5 Troubleshooting th e Installation Troubleshooting the Cooling Subsystem Overtemperatur.
Chapter 5 Troublesho oting the Installation Troubleshooting the Cooli ng Subsystem 5-40 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Step 1 Make sur e the blo wer modules are operating properl y when you po wer on the system.
5-41 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 5 Troubleshooting th e Installation Troubleshooting the Cooling Subsystem.
Chapter 5 Troublesho oting the Installation Troubleshooting the Cooli ng Subsystem 5-42 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01.
CH A P T E R 6-1 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 6 Router Field Diagnostics This chapter descr ibes the diagnostic command s you can .
Chapter 6 Rou ter Field Diagnostics Diagnostics Ove rview 6-2 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 • Easy access to the most current di .
6-3 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 6 Router Field Di agnostics Field-Programmable Gate Array Overview Diagnostic testing stop s when all of the te sts are completed, are terminated by the user , or by default if an error is encount ered .
Chapter 6 Rou ter Field Diagnostics Field-Programm able Gate Arr ay Overview 6-4 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Some FPGA images are b undled within the Cisco IOS image and are updated along with a ne w release.
6-5 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 6 Router Field Di agnostics Field-Programmable Gate Array Overview Note Before updating t.
Chapter 6 Rou ter Field Diagnostics Field-Programm able Gate Arr ay Overview 6-6 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Step 2 Enter the diag slot- number update-fpga source { tftp | flash } sour ce-path command to update the fl ash memory .
6-7 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 6 Router Field Di agnostics Field-Programmable Gate Array Overview FD 3> Compiled by ckhuong on Fri Jan 17 15:51:36 PST 2003 FD 3> view: ckhuong-conn_isp.
Chapter 6 Rou ter Field Diagnostics Using the diag Command 6-8 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Using the diag Command Y ou can use th.
6-9 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 6 Router Field Di agnostics Using the diag Command Diagnostic Commands for Cisco 12000 Series Rout Processors The follo wing diagnostic commands apply t o GRP and PRP route processors.
Chapter 6 Rou ter Field Diagnostics Using the diag Command 6-10 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 sour ce-path Specifies t he path to the diagno stic image f ile c12k-fdiagsbflc-mz. IOS Release Where IOS Release corresponds to the Cisco IOS release number .
6-11 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 6 Router Field Di agnostics Using the diag Command ver bos e (Optional) Enab les progress and error messages to be displayed on th e console.
Chapter 6 Rou ter Field Diagnostics Using the diag Command 6-12 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 After all diagnostic tests are completed on a lin e card, a P ASSED or TEST F AILURE message appears on the console.
6-13 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 6 Router Field Di agnostics diag Command Output Examp les Caution Do not replace memory compo nents without properl y grounding both the bo ard and yourself.
Chapter 6 Rou ter Field Diagnostics diag Command Outp ut Examples 6-14 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 FD 7> ***************************************************** FD 7> GSR Field Diagnostics V6.
6-15 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 6 Router Field Di agnostics diag Command Output Examp les Loading images/award/c12k-fdiagsbflc-mz from 192.164.1.1 (via Ethernet0): !!!!!! (.
Chapter 6 Rou ter Field Diagnostics diag Command Outp ut Examples 6-16 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 FDIAG_STAT_IN_PROGRESS(7): tes.
CH A P T E R 7-1 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 7 Maintaining the Router Y our router is equipped as ordered and is ready for instal lation and startup when it is shipped.
Chapter 7 Maintaining the Router Powering Off the Router 7-2 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 • Removing and Replacing Cards from th.
7-3 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 7 Maintaining the Router Removing and Installing the Front Covers and Beze l Exten ders on Original Cisco 12000 Series Routers Step 3 V erify that the PWR OK indicator on each po wer supply is of f.
Chapter 7 Maintaining the Router Removing and Installi ng the Front Covers and Beze l Extenders on Original Cisco 12000 Series Routers 7-4 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installatio.
7-5 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 7 Maintaining the Router Removing and Installing the Front Covers and Beze l Exten ders o.
Chapter 7 Maintaining the Router Removing and Installi ng the Front Covers and Beze l Extenders on Original Cisco 12000 Series Routers 7-6 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installatio.
7-7 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 7 Maintaining the Router Removing and Installing the Front Covers and Beze l Exten ders o.
Chapter 7 Maintaining the Router Removing and Installi ng the Front Covers and Beze l Extenders on Original Cisco 12000 Series Routers 7-8 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installatio.
7-9 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 7 Maintaining the Router Removing and Installing the Front Covers and Beze l Exten ders o.
Chapter 7 Maintaining the Router Removing and Installi ng the Front Covers and Beze l Extenders on Original Cisco 12000 Series Routers 7-10 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installati.
7-11 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 7 Maintaining the Router Removing and Installing the Front Covers and Beze l Exten ders .
Chapter 7 Maintaining the Router Removing and Installi ng the Front Covers and Beze l Extenders on Original Cisco 12000 Series Routers 7-12 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Step 4 Secure the front co ver to the ai r f ilter door usi ng the (4) scre ws that you remov ed in Step 2.
7-13 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 7 Maintaining the Router Removing and Installing Front Doors o n Cisco 12016 Enhanced Se.
Chapter 7 Maintaining the Router Removing and Installing Front Door s on Cisco 12016 Enhanced Series Routers 7-14 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Step 1 Open the top front door b y pressing the r ight latch b utton ( Figure 7-7 ).
7-15 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 7 Maintaining the Router Removing and Installing Front Doors o n Cisco 12016 Enhanced Series Routers Step 2 Remo ve t he front door by lif ting the (top and bottom) hin ge pins to free the d oor from the chassis ( Fig ure 7-8 ).
Chapter 7 Maintaining the Router Removing and Installing Front Door s on Cisco 12016 Enhanced Series Routers 7-16 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Step 3 Remo ve th e b umpers and pi vot blo cks from the door as sho wn in Figure 7-9 .
7-17 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 7 Maintaining the Router Cleaning or Re placing the Chassis Air Filter Step 4 Reinstall the h ardware to the opposi te sides of the front door: a.
Chapter 7 Maintaining the Router Cleaning or Replacing the Chassis Air Filter 7-18 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Cleaning or Replacing the Chassis Air Filter on Cisco 12016 Original Series Routers Use the follo wing procedure to clean or replace an original series air f ilter .
7-19 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 7 Maintaining the Router Cleaning or Re placing the Chassis Air Filter Step 2 Lift up the air f ilter and c a refully slide it ou t the door ( Figure 7-11 ).
Chapter 7 Maintaining the Router Cleaning or Replacing the Chassis Air Filter 7-20 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Step 3 V isually check the condition of the air f ilter to deter mine whether to cle an it or install a new replacement.
7-21 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 7 Maintaining the Router Cleaning or Re placing the Chassis Air Filter Step 5 Lift up the air f ilter door so that th e four guide pins are inserted in the corresponding ho les on each side of the switch f abric card cage ( Figure 7-13 ).
Chapter 7 Maintaining the Router Cleaning or Replacing the Chassis Air Filter 7-22 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Cleaning or Replacing the Chassis Air Filter on Cisco 12016 Enhanced Series Routers Use the follo wing procedure to clean or rep lace the enhanced series air f ilter .
7-23 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 7 Maintaining the Router Cleaning or Re placing the Chassis Air Filter Step 2 Lift up the air filter and carefu lly slide it out of the door ( Figure 7-11 ).
Chapter 7 Maintaining the Router Removing and Replacing Blower Modules 7-24 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Step 3 V isually check the condition of the air filter to deter mine whether to clean it or install a new replacement.
7-25 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 7 Maintaining the Router Removing and Replac ing Blower Modules If you ar e replaci ng an: • Original blo wer module (GSR16-B LOWER=)—Use an original blo wer module or enhanced capacity blo wer module s as replacements.
Chapter 7 Maintaining the Router Removing and Replacing Blower Modules 7-26 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 • Heads-do wn orientation—Install the blo wer module in the lo wer blower module bay in the “heads-do wn” orientation with the three f an air intake openings fa ce up.
7-27 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 7 Maintaining the Router Removing and Replac ing Blower Modules Step 2 Install the new blo wer module into the chassis ( Figure 7-17 ): a. Lift the blo wer module (with two hands) and slide it h alfway i nto the module bay .
Chapter 7 Maintaining the Router Removing and Replacing Blower Modules 7-28 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Troubleshooting the Blower Installation Use the follo wing procedure to troubleshoot a blo wer module if it is not operating properly after inst allation.
7-29 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 7 Maintaining the Router Removing and Replacing AC and DC Power Subsystem Components Rem.
Chapter 7 Maintaining the Router Removing and Re placing AC and DC Power Subsyste m Components 7-30 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Power Supply and Power Shelf Compatibility Cisco 12016 series routers are a vailable with either an A C or a DC power supply system.
7-31 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 7 Maintaining the Router Removing and Replacing AC and DC Power Subsystem Components AC Power Supply (PWR-GSR16-AC=) Use to replace original 2000 W A C power supplies only .
Chapter 7 Maintaining the Router Removing and Re placing AC and DC Power Subsyste m Components 7-32 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 I.
7-33 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 7 Maintaining the Router Removing and Rep lacing an AC Po wer Supply Removing and Replacing an AC Power Supply This section pro vides the procedure to remo ve an A C po wer supply from the standard single-le vel A C power shelf.
Chapter 7 Maintaining the Router Removing and Replacing an AC Power Supp ly 7-34 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Figure 7-19 identif ies the components of a 2000 W A C po wer supply .
7-35 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 7 Maintaining the Router Removing and Rep lacing an AC Po wer Supply Figure 7-20 identif ies the components of a 2500 W A C po wer supply .
Chapter 7 Maintaining the Router Removing and Replacing an AC Power Supp ly 7-36 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 T o remov e and replace an A C power supply , use the following procedure.
7-37 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 7 Maintaining the Router Removing and Rep lacing an AC Po wer Supply Step 4 Re mov e the 2000 W PEM ( Figure 7-21 ): a. Release the ejector lev er by lifting the spring cl ip.
Chapter 7 Maintaining the Router Removing and Replacing an AC Power Supp ly 7-38 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Step 5 Re mov e the 2500W PEM ( Figure 7-22 ): a. Loosen the captiv e screw to release the ejector handle.
7-39 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 7 Maintaining the Router Removing and Rep lacing an AC Po wer Supply Step 7 Install the 2000W PEM ( Figure 7-23 ): a. Slide the po wer supply into the bay until it mates with its backplane connector .
Chapter 7 Maintaining the Router Removing and Replacing an AC Power Supp ly 7-40 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Figur e 7 -23 Instal.
7-41 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 7 Maintaining the Router Removing and Rep lacing an AC Po wer Supply Step 8 Install the 2500 W po wer supply ( Figure 7-24 ): a. Slide the po wer supply into the bay until it mates with its backplane connector .
Chapter 7 Maintaining the Router Removing and Replacing an AC Power Supp ly 7-42 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Troubleshooting the AC Power Supply Installation Use the follo wing procedure to troubl eshoot the A C po wer supply if it is not operating properly after i nstallation.
7-43 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 7 Maintaining the Router Removing and Rep lacing an AC Po wer Supply • TEMP (yello w)—Indicates that the powe r supply is in an o ver temperature conditio n, causing a shu t-down to occur .
Chapter 7 Maintaining the Router Removing and Replacing the Standar d AC-Input Power Shelf 7-44 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 • O.
7-45 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 7 Maintaining the Router Removing and Re placing the St andard A C-Input Power Shelf Ste.
Chapter 7 Maintaining the Router Removing and Replacing the Standar d AC-Input Power Shelf 7-46 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Step 3 Unsea t the po wer shelf from the chassis ( Figure 7-26 ): a.
7-47 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 7 Maintaining the Router Removing and Re placing the St andard A C-Input Power Shelf Ste.
Chapter 7 Maintaining the Router Removing and Replacing the Standar d AC-Input Power Shelf 7-48 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Step 5 Inse rt the ne w po wer she lf halfway into the chassis.
7-49 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 7 Maintaining the Router Removing and Re placing the St andard A C-Input Power Shelf Step 7 Seat the po wer shelf to the chassis ( Figure 7-29 ): a.
Chapter 7 Maintaining the Router Removing and Replacing the Standar d AC-Input Power Shelf 7-50 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Step 8 Re connect each of the A C power cords to the back panel of the po wer shelf and secure them in place with their retentio n clips ( Figure 7-30 ).
7-51 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 7 Maintaining the Router Removing and Replacin g the Optional 2-Level A C-Input Power Sh.
Chapter 7 Maintaining the Router Removing and Replacing the Optiona l 2-Level AC-Input Power Shelf 7-52 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-.
7-53 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 7 Maintaining the Router Removing and Replacin g the Optional 2-Level A C-Input Power Shelf Step 3 Loose n the two capti ve screws on each side of the po wer shelf.
Chapter 7 Maintaining the Router Removing and Replacing the Optiona l 2-Level AC-Input Power Shelf 7-54 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Step 6 Inse rt the ne w po wer she lf halfway into the chassis.
7-55 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 7 Maintaining the Router Removing and Replacin g the Optional 2-Level A C-Input Power Sh.
Chapter 7 Maintaining the Router Removing and Replacing the Optiona l 2-Level AC-Input Power Shelf 7-56 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-.
7-57 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 7 Maintaining the Router Removing and Replacin g the Optional 2-Level A C-Input Power Sh.
Chapter 7 Maintaining the Router Removing and Replacing the Optiona l 2-Level AC-Input Power Shelf 7-58 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 • TEMP (yello w)—Indicates that the powe r supply is in an o ver temperature conditio n, causing a shu t-down to occur .
7-59 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 7 Maintaining the Router Upgrading the AC-Input Powe r Shelf • OC (2500 W PEM only) (s.
Chapter 7 Maintaining the Router Removing and Replacing a DC PEM 7-60 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Removing and Replacing a DC PEM This section contains the procedure to remov e and replace an DC PEM from the chassis.
7-61 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 7 Maintaining the Router Removing and Replacing a DC PEM Figure 7-37 identif ies the components of a 2400 W DC po wer supply .
Chapter 7 Maintaining the Router Removing and Replacing a DC PEM 7-62 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Use the following procedure to remo ve and replace a DC PEM. Step 1 Power of f the PEM by switching its circuit break er of f.
7-63 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 7 Maintaining the Router Removing and Replacing a DC PEM Figur e 7 -38 Removing a DC PEM.
Chapter 7 Maintaining the Router Removing and Replacing a DC PEM 7-64 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Step 5 Install the new DC PEM into the po wer shelf ( Figure 7-39 ): a. Slide the PEM halfw a y into the chassi s.
7-65 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 7 Maintaining the Router Removing and Replacing a DC PEM Figur e 7 -39 Installing a DC P EM Step 6 Power on the DC cir cuit breaker assig ned to that PEM.
Chapter 7 Maintaining the Router Removing and Replacing a DC PEM 7-66 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Troubleshooting the DC PEM Installation Use the follo wing procedure to troublesh oot the DC PEM if it is not operating properly after inst allation.
7-67 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 7 Maintaining the Router Removing and Replacing a DC PEM • TEMP (yello w)—Indicates th at the PEM is in an ov ertemperature condition causing a shut-do w n to occur .
Chapter 7 Maintaining the Router Removing and Replacing the DC-Inp ut Power Shelf 7-68 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Removing and Replacing the DC-Input Power Shelf Use the follo wing procedure to remo ve and replace the DC-input po wer shelf.
7-69 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 7 Maintaining the Router Removing and Replacing the DC-Input Power Shelf Step 3 Measure the v oltage acros s each pair of positi ve (+) and neg ati ve (–) t erminals of the power shelf to be sur e they are not re cei ving power .
Chapter 7 Maintaining the Router Removing and Replacing the DC-Inp ut Power Shelf 7-70 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Figur e 7 -41 .
7-71 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 7 Maintaining the Router Removing and Replacing the DC-Input Power Shelf Step 5 Unsea t the po wer shelf from the chassis ( Figure 7-42 ): a.
Chapter 7 Maintaining the Router Removing and Replacing the DC-Inp ut Power Shelf 7-72 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Step 6 Remove .
7-73 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 7 Maintaining the Router Removing and Replacing the DC-Input Power Shelf Step 7 Inse rt the ne w po wer she lf halfway into the chassis.
Chapter 7 Maintaining the Router Removing and Replacing the DC-Inp ut Power Shelf 7-74 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Step 9 Seat the po wer shelf to the chassis ( Figure 7-45 ): a. T ighten the ejector ja ckscre w .
7-75 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 7 Maintaining the Router Removing and Replacing the DC-Input Power Shelf War n in g When reconnecting source DC power cables, alway s connect the ground cable first.
Chapter 7 Maintaining the Router Removing and Replacing the DC-Inp ut Power Shelf 7-76 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Step 11 Po wer on the source DC circuit breakers f or the PEMs.
7-77 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 7 Maintaining the Router Removing and Replacing the DC-Input Power Shelf Troubleshooting.
Chapter 7 Maintaining the Router Removing and Replacing the DC-Inp ut Power Shelf 7-78 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Step 4 Check t.
7-79 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 7 Maintaining the Router Removing and Replacing Cards from the Chassis • OC (2400 W PE.
Chapter 7 Maintaining the Router Removing and Replac ing Cards from the Chassis 7-80 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Caution Handle all cards b y the metal card carrier edges only; a void t ouching the board or any connect or pins.
7-81 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 7 Maintaining the Router Removing and Replacing Cards from the Chassis Figur e 7 -48 Removing a Line Car d from th e Line Car d and RP Card Cage Removing and Replacing an Alarm Card The router is equipped with two alarm card s.
Chapter 7 Maintaining the Router Removing and Replac ing Cards from the Chassis 7-82 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Figur e 7 -49 Al.
7-83 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 7 Maintaining the Router Removing and Replacing Cards from the Chassis Use the follo wing procedure to remove an d replace an alarm card from either the top or botto m card cage.
Chapter 7 Maintaining the Router Removing and Replac ing Cards from the Chassis 7-84 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Removing and Replacing Switch Fabric Cards The switch fabric card cage is located be hind the air fil ter door on the front of the chassis.
7-85 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 7 Maintaining the Router Removing and Replacing Cards from the Chassis Step 2 R e move t he ca r d: a. Pi vot the ejector le vers to unseat t h e card from the backplane connector .
Chapter 7 Maintaining the Router Upgrading the Switch Fabric 7-86 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Upgrading the Switch Fabric The switch fa bric on the Cisco 120 16 and the Cisco 1 2416 routers can be upgraded in the f ield.
7-87 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 7 Maintaining the Router Upgrading the Switch Fabric Upgrade Procedures T o upgrade the switch f abric, follo w these steps: Step 1 Power of f the router .
Chapter 7 Maintaining the Router Removing and Installing a Chassis 7-88 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Step 11 Run the show gsr command to verify that the ne w switch fabric cards are de tected by the system.
7-89 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 7 Maintaining the Router Removing and Installing a Chassis Because you are removing all .
Chapter 7 Maintaining the Router Removing and Installing a Chassis 7-90 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Preparing the Replacement Cha.
7-91 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 7 Maintaining the Router Removing and Installing a Chassis Step 6 Disc onnect the cables from each alarm card. Label each of the alarm card cables before you disconnect them.
Chapter 7 Maintaining the Router Removing and Installing a Chassis 7-92 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Removing the Chassis from the Equipment Rack Use the follo wing procedure to remo ve the chassi s from the equipment rack.
7-93 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 7 Maintaining the Router Removing and Installing a Chassis Step 4 W orking from the top of the ch assis do wn, remove the scre ws that secure the chassis to the mounting flanges on the rack ( Figure 7-54 ).
Chapter 7 Maintaining the Router Removing and Installing a Chassis 7-94 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Figur e 7 -54 Remo ving the M.
7-95 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 7 Maintaining the Router Removing and Installing a Chassis Step 5 Position one person in.
Chapter 7 Maintaining the Router Removing and Installing a Chassis 7-96 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Step 7 T urn the scissor-jack scre w clockwise to slo wly lo wer the scissor-jack platform ( Figure 7-56 ).
7-97 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 7 Maintaining the Router Removing and Replacin g a Power Bus Board Fu se Installing the Replacement Chassis Use the follo wing procedure to inst all the replacement rack in the chassis.
Chapter 7 Maintaining the Router Removing and Replacing a Po wer Bus Board Fuse 7-98 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Use the following procedure to replace a fuse on the po wer bus board.
7-99 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Chapter 7 Maintaining the Router Removing and Replacin g a Power Bus Board Fu se Figur e 7 -58 Removing and Replacing a P ow er Bus Board F use F2 F1 - MBus F2 - 5.
Chapter 7 Maintaining the Router Removing and Replacing a Po wer Bus Board Fuse 7-100 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01.
A-1 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 APPENDIX A Technical Specifications This appendix i ncludes the follo wing sections: • Router S.
Appendix A Technical Sp ecifications Router Specifications A-2 Cisco 12016, Cisco 12416, and Cisco 12816 Router Installation and Configuration Gui de OL-11495-01 Ta b l e A -1 Ph ysical Specifications.
A-3 Cisco 12016, Cisco 12416, and Ci sco 1281 6 Router Installation and Configuration Guide OL-11495-01 Appendix A Technical Sp ecifications Router Specifications Caution T o ensure that th e chassis conf iguration co mplies with the req uired po wer b udgets, use the on-line po wer calculator .
Appendix A Technical Sp ecifications Router Specifications A-4 Cisco 12016, Cisco 12416, and Cisco 12816 Router Installation and Configuration Gui de OL-11495-01 Input current rating 60A maximum @ 40.5 VDC Source DC service requirement Suf ficient to supply the rated i nput current.
A-5 Cisco 12016, Cisco 12416, and Ci sco 1281 6 Router Installation and Configuration Guide OL-11495-01 Appendix A Technical Sp ecifications Compliance and Safety Info rmation Compliance and Safety Information The Cisco 12016, Cisco 2416 and Ci sco 12816 routers are d esigned to meet the re gulatory comp liance an d safety ap prov al requirements .
Appendix A Technical Sp ecifications Compliance and Sa fety Information A-6 Cisco 12016, Cisco 12416, and Cisco 12816 Router Installation and Configuration Gui de OL-11495-01.
B-1 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 APPENDIX B Site Log The site log pro vides a historical record of all action s rele v ant to the operation and maintenance of the rou ter .
Appendix B Site Log B-2 Cisco 12016, Cisco 12416, and Cisco 12816 Router Installation and Configuration Gui de OL-11495-01 Date Action Performed or Symptoms Observed Initials.
B-3 Cisco 12016, Cisco 12416, and Ci sco 1281 6 Router Installation and Configuration Guide OL-11495-01 Appendix B Site Log.
Appendix B Site Log B-4 Cisco 12016, Cisco 12416, and Cisco 12816 Router Installation and Configuration Gui de OL-11495-01.
IN-1 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 INDE X Numerics 100BASE-T maximum cable lengths 2-35, 2-44 specifications 2-35, 2-44 transmissio.
Index IN-2 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 asynchronous serial port s See auxiliary port Asynchronous Transfer Mode, interface config.
IN-3 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Index attaching GRP Ethernet port 3-33 to 3-35 console port 2-39 DC-input power 2-19 DC-input po.
Index IN-4 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 Cisco 12416 and 128 16 router insertion height 3-16 Cisco Express Forwarding (CEF) 2-40 cl.
IN-5 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Index system 4-14 to 4-28 using c onfigu ration mo de 4-27 to 4-28 configuring f lash memory 4-4.
Index IN-6 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 shelf specifications A-3 DC-input power ent ry module removing 7-63 DC-input power shelf t.
IN-7 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Index F Fast Ethernet specifications 2-44 figures alarm card connector location 3-40 status LEDs.
Index IN-8 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 RJ-45 and MII Ethe rnet connecti ons (figure) 3-34 RJ-45 Ethernet connection 2-29 RJ-45 Et.
IN-9 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Configuration Guide OL-11495-01 Index OK (green) 4-4 PWR OK 4-4 route processo r 5-19, 5-20, 5-22 line card alphanumeric LED dis.
Index IN-10 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 OEM bit 4-32 P Packet-over-SONET, interface configuration 4-25 parameters 4-22 part numb .
IN-1 1 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Config uration Guide OL-11495-01 Index R rack insertion 3-18 rack-mounting guidel ines 2-11 platform installati on 3-14 verify.
Index IN-12 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01 site requir ements air flow 2-15 power 2-20 rack mounting 2-7, 2-11 site log B-1 suppleme.
IN-1 3 Cisco 12016, Cisco 12416, and Cisco 12816 R outer Installation and Config uration Guide OL-11495-01 Index sensors 1-46 system specifications A-4 terminal connector locations DC-input power shel.
Index IN-14 Cisco 12016, Cisco 1241 6, and Cisco 12816 Router Installation and Configuration Guide OL-11495-01.
Een belangrijk punt na aankoop van elk apparaat Cisco Cisco 12416 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Cisco Cisco 12416 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Cisco Cisco 12416 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Cisco Cisco 12416 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Cisco Cisco 12416 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Cisco Cisco 12416 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Cisco Cisco 12416 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Cisco Cisco 12416 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
