Gebruiksaanwijzing /service van het product 1130AG van de fabrikant Cisco Systems
Ga naar pagina of 126
Americas Headquarters Cisco Systems, In c. 170 West Tasman Drive San Jose, CA 951 34-1706 USA http://www.ci sco.com Tel: 408 526-4000 800 553-NETS (638 7) Fax: 408 527-0883 Cisco Air onet 1 1 30A G S .
THE SPECIFICATION S AND INFORMATION REGA RDING THE PRODUCTS IN THIS MANUAL A RE SUBJECT TO CHANGE W ITHOUT NOTICE. ALL STATEMENTS , INFORMATION, AND RECOMMENDA TIONS IN THI S MANUAL ARE BE LIEVED TO BE A CCURATE BUT ARE PRESENTED WI THOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED.
iii Cisco Aironet 1130AG Series Access Po int Hardware Installation Guide OL-8369-05 CONTENTS Preface ix Audience i-ix Purpose i-ix Organization i-ix Conventi ons i-x Related Publication s i-xii Obtai.
Contents iv Cisco Aironet 1130AG Series Access Po int Hardware Installation Guide OL-8369-05 Warnings 2-2 Unpacking the Access Point 2-3 Package Contents 2-3 Basic Installation Guidelines 2-4 Controll.
Contents v Cisco Aironet 1130AG Series Access Po int Hardware Installation Guide OL-8369-05 Configuring the Access Point System Power Settings Using a Browser 3-12 Running the Carrier Bus y Test 3-14 .
Contents vi Cisco Aironet 1130AG Series Access Po int Hardware Installation Guide OL-8369-05 APPENDIX A Translated Safety Warnings A-1 APPENDIX B Declarations of Confo rmity and Regulatory Information.
Contents vii Cisco Aironet 1130AG Series Access Po int Hardware Installation Guide OL-8369-05 G LOSSARY I NDEX.
Contents viii Cisco Aironet 1130AG Series Access Po int Hardware Installation Guide OL-8369-05.
ix Cisco Aironet 1130AG Series Access Po int Hardware Installation Guide OL-8369-05 Preface Audience This guide is fo r the networking professional who instal ls and manages the Cisco Ai ronet 1130AG Ser ies Access Point. The 1130AG series access point is available in autonomous and light weight configurations.
x Cisco Aironet 1130AG Series Access Po int Hardware Installation Guide OL-8369-05 Preface Conventions Chapter 3, “Troubleshooting Autono mous Access Points,” provides trou bleshooting procedures for basic problems with the auton omous access point.
xi Cisco Aironet 1130AG Series Access Po int Hardware Installation Guide OL-8369-05 Preface Conventions Caution Means reader be careful. In this situation, you mi ght do something th at could result equi pment damage or loss of data. War nin g This warning symbol means danger .
xii Cisco Aironet 1130AG Series Access Po int Hardware Installation Guide OL-8369-05 Preface Related Publications Related Publications These documents provide compl ete information about the autonom o.
xiii Cisco Aironet 1130AG Series Access Po int Hardware Installation Guide OL-8369-05 Preface Locating the Product Serial Number Locating the Product Serial Number The access point seria l number is on the botto m of the housing (refer to Figure 1 ).
xiv Cisco Aironet 1130AG Series Access Po int Hardware Installation Guide OL-8369-05 Preface Locating the Produc t Serial Number.
CH A P T E R 1-1 Cisco Aironet 1130AG Series Access Point Hardware Installation Gu ide OL-8369-05 1 Overview The Cisco Aironet 1130AG Series Access Point is available in autonomous and lightweight configurations.
1-2 Cisco Aironet 1130AG Series Access Po int Hardware Installation Guide OL-8369-05 Chapter 1 Overvi ew Guidelines for Using 1130AG Se ries Lightweight Access Points The lightweight 1131AG ac cess point contains two integrated ra dios: a 2.4-GHz radio (IEEE 802.
1-3 Cisco Aironet 1130AG Series Access Point Hardware Installation Gu ide OL-8369-05 Chapter 1 Overview Hardware Features Hardware Features Key hardware features of the access point include: • Dual-.
1-4 Cisco Aironet 1130AG Series Access Po int Hardware Installation Guide OL-8369-05 Chapter 1 Overvi ew Hardwa re Features Single or Dual-Radio Operation The 1131AG access point supports simultaneous radio operation using a 2.4-GHz 802.11g radio and a 5-GHz 802.
1-5 Cisco Aironet 1130AG Series Access Point Hardware Installation Gu ide OL-8369-05 Chapter 1 Overview Hardware Features Power Sources The access point can receive power from an ext ernal power module or from in line power using the Ethernet cable. The access point supp orts the IEEE 802.
1-6 Cisco Aironet 1130AG Series Access Po int Hardware Installation Guide OL-8369-05 Chapter 1 Overvi ew Hardwa re Features Anti-Theft Features There are three methods of securing the acc ess point: .
1-7 Cisco Aironet 1130AG Series Access Point Hardware Installation Gu ide OL-8369-05 Chapter 1 Overview Network Examples with Autonomous Access Points – When a tamper-resistant head scre w (user supplied ) is used, access to the mounting screws that attach the mounting plat e is greatly restricted.
1-8 Cisco Aironet 1130AG Series Access Po int Hardware Installation Guide OL-8369-05 Chapter 1 Overvi ew Network Exa mples with Autonomous Access Points Root Unit on a Wired LAN An autonomous access point con nected directly to a wired LAN provides a connection point for wireless users.
1-9 Cisco Aironet 1130AG Series Access Point Hardware Installation Gu ide OL-8369-05 Chapter 1 Overview Network Examples with Autonomous Access Points Repeater Unit that Extends Wireless Range An auto.
1-10 Cisco Aironet 1130AG Series Access Po int Hardware Installation Guide OL-8369-05 Chapter 1 Overvi ew Network Exa mples with Autonomous Access Points Central Unit in an All-Wireless Network In an all-wireless network, an autonomous access poin t acts as a stand-alone root unit.
1-11 Cisco Aironet 1130AG Series Access Point Hardware Installation Gu ide OL-8369-05 Chapter 1 Overview Network Example with Lightwe ight Access Points In Figure 1-8 , the autonomo us unit is configured in workgroup bridge mode and is associated to a Cisco Aironet root bridge as a wi reless bridge device.
1-12 Cisco Aironet 1130AG Series Access Po int Hardware Installation Guide OL-8369-05 Chapter 1 Overvi ew Network Exa mple with Li ghtweight Access Points.
CH A P T E R 2-1 Cisco Aironet 1130AG Series Access Point Hardware Installation Gu ide OL-8369-05 2 Installing the Access Point This chapter describes the installation of the access point and includes.
2-2 Cisco Aironet 1130AG Series Access Po int Hardware Installation Guide OL-8369-05 Chapter 2 Insta lling the Access Point Safety Information Safety Information Follow the guidelines i n this section to ensure proper operation and safe use of the access point .
2-3 Cisco Aironet 1130AG Series Access Point Hardware Installation Gu ide OL-8369-05 Chapter 2 Inst alling the Access Point Unpacking the Access Po int War nin g In order to comply with FCC radio frequency (RF) exposure limits, antennas shou ld be located at a minimum of 7.
2-4 Cisco Aironet 1130AG Series Access Po int Hardware Installation Guide OL-8369-05 Chapter 2 Insta lling the Access Point Basic Installation Guidelines Basic Installation Guidelines Because the access point is a radio device, it is su sceptible to interference that can reduce through put and range.
2-5 Cisco Aironet 1130AG Series Access Point Hardware Installation Gu ide OL-8369-05 Chapter 2 Inst alling the Access Point Deploying the Access Po ints on the Wireless Network Deploying the Access Po.
2-6 Cisco Aironet 1130AG Series Access Po int Hardware Installation Guide OL-8369-05 Chapter 2 Insta lling the Access Point Deploying the Access Points on the Wireless Network Step 4 For lightweight access point s, after your access points are dep loyed, ensure that your con troller is not configured as a master controller.
2-7 Cisco Aironet 1130AG Series Access Point Hardware Installation Gu ide OL-8369-05 Chapter 2 Inst alling the Access Point Deploying the Access Po ints on the Wireless Network Mounting Plate The access point mounting plate is designed to accomodate multipl e mounting method s.
2-8 Cisco Aironet 1130AG Series Access Po int Hardware Installation Guide OL-8369-05 Chapter 2 Insta lling the Access Point Deploying the Access Points on the Wireless Network The mounting p late features are de scribed below: • Keyhole clips—used to attach th e access point to the mounting plate.
2-9 Cisco Aironet 1130AG Series Access Point Hardware Installation Gu ide OL-8369-05 Chapter 2 Inst alling the Access Point Deploying the Access Po ints on the Wireless Network Figur e 2-3 T -Rail Clip Feat ures The adjustable T-ra il clip attaches to the m ounting plate us ing four 6 x 32 x 1/4 i nch flat head screws.
2-10 Cisco Aironet 1130AG Series Access Po int Hardware Installation Guide OL-8369-05 Chapter 2 Insta lling the Access Point Deploying the Access Points on the Wireless Network Figure 2-4 indicates where yo u should push to open and close the adjustable T-ra il clips.
2-11 Cisco Aironet 1130AG Series Access Point Hardware Installation Gu ide OL-8369-05 Chapter 2 Inst alling the Access Point Opening the Access Point Cover Opening the Access Point Cover The top cover.
2-12 Cisco Aironet 1130AG Series Access Po int Hardware Installation Guide OL-8369-05 Chapter 2 Insta lling the Access Point Mounting the Access Point on a Horizo ntal Surface Mounting the Access Poin.
2-13 Cisco Aironet 1130AG Series Access Point Hardware Installation Gu ide OL-8369-05 Chapter 2 Inst alling the Access Point Mounting the Access Point Be low a Suspended Ceiling Step 2 Drill a 3/16 in. (4.7 mm) hole at the X mou nting hole locations you marked .
2-14 Cisco Aironet 1130AG Series Access Po int Hardware Installation Guide OL-8369-05 Chapter 2 Insta lling the Access Point Mounting the Access Point Above a Suspended Ceiling Follow these steps to mount your access point on a suspended ceiling: Step 1 Decide where you want to mount t he access point on your suspended ceili ng.
2-15 Cisco Aironet 1130AG Series Access Point Hardware Installation Gu ide OL-8369-05 Chapter 2 Inst alling the Access Point Mounting the Access Point Abo ve a Suspended Ceiling Follow these steps to mount the access point above a suspended ceiling. Refe r to Figure 2-8 before proceeding.
2-16 Cisco Aironet 1130AG Series Access Po int Hardware Installation Guide OL-8369-05 Chapter 2 Insta lling the Access Point Mounting Access Po int on a Network Cab le Box Step 8 Connect a drop wire to a buildi ng structural element and the hole provided in the bracket mounting clip.
2-17 Cisco Aironet 1130AG Series Access Point Hardware Installation Gu ide OL-8369-05 Chapter 2 Inst alling the Access Point Attaching the Access Poin t to the Mounting Plate Step 3 In the cable bay area, line up the visible access point ke yhole with the mounting plate keyhole c lip located near the secu rity padlock hole (see Figure 2-10 ).
2-18 Cisco Aironet 1130AG Series Access Po int Hardware Installation Guide OL-8369-05 Chapter 2 Insta lling the Access Point Securing the Access Point Securing the Access Point There are two ways to s.
2-19 Cisco Aironet 1130AG Series Access Point Hardware Installation Gu ide OL-8369-05 Chapter 2 Inst alling the Access Point Securing the Access Poin t Securing the Access Point to the Mounting Plate .
2-20 Cisco Aironet 1130AG Series Access Po int Hardware Installation Guide OL-8369-05 Chapter 2 Insta lling the Access Point Securing the Access Point Step 4 Insert a padlock into t he padlock post hole and lock the padlock.
2-21 Cisco Aironet 1130AG Series Access Point Hardware Installation Gu ide OL-8369-05 Chapter 2 Inst alling the Access Point Connecting the Ethernet an d Power Cables Connecting the Ethernet and Power Cables The access point receives power thro ugh the Ethernet cable or an extern al power module.
2-22 Cisco Aironet 1130AG Series Access Po int Hardware Installation Guide OL-8369-05 Chapter 2 Insta lling the Access Point Connecting the Ethernet and Powe r Cables Connecting to an Ethernet Network with an Inline Power Source Caution Be careful when handling the access po int; the bottom pl ate might be hot.
2-23 Cisco Aironet 1130AG Series Access Point Hardware Installation Gu ide OL-8369-05 Chapter 2 Inst alling the Access Point Connecting the Ethernet an d Power Cables Step 7 Connect the other end of t.
2-24 Cisco Aironet 1130AG Series Access Po int Hardware Installation Guide OL-8369-05 Chapter 2 Insta lling the Access Point Rotating the Cisco Logo Rotating the Cisco Logo The Cisco logo on the top of the un it can be rotated to correctly p osition the logo for any mou nting arrangement making it always easy to read.
CH A P T E R 3-1 Cisco Aironet 1130AG Series Access Point Hardware Installation Gu ide OL-8369-05 3 Troubleshooting Autonomous Access Points This chapter provides tr oubleshooting procedur es fo r basic prob lems with the autonomous access point (model: AIR-AP1131AG or A IR-AP1131G).
3-2 Cisco Aironet 1130AG Series Access Po int Hardware Installation Guide OL-8369-05 Chapter 3 Troubleshoo ting Autonomous Access Points Checking the Auton omous Access Point LE Ds Checking the Autono.
3-3 Cisco Aironet 1130AG Series Access Point Hardware Installation Gu ide OL-8369-05 Chapter 3 Troubleshooting Auto nomous Access Points Checking the Autonomous A ccess Point LEDs The LED signals are listed in Table 3-1 .
3-4 Cisco Aironet 1130AG Series Access Po int Hardware Installation Guide OL-8369-05 Chapter 3 Troubleshoo ting Autonomous Access Points Checking Basic Settings Checking Basic Settings Mismatched basic settings are the most c ommon causes of lost conn ectivity w ith wireless c lients.
3-5 Cisco Aironet 1130AG Series Access Point Hardware Installation Gu ide OL-8369-05 Chapter 3 Troubleshooting Auto nomous Access Points Checking Basic Setting s Enable Radio Interfaces To enable the radio interfaces, follow these instructions: Step 1 Use your web-browser to access your access poi nt.
3-6 Cisco Aironet 1130AG Series Access Po int Hardware Installation Guide OL-8369-05 Chapter 3 Troubleshoo ting Autonomous Access Points Low Power Condition for Autonomous A ccess Points If a wireless.
3-7 Cisco Aironet 1130AG Series Access Point Hardware Installation Gu ide OL-8369-05 Chapter 3 Troubleshooting Auto nomous Access Points Low Power Condition for Autonomous Access Points The access poi.
3-8 Cisco Aironet 1130AG Series Access Po int Hardware Installation Guide OL-8369-05 Chapter 3 Troubleshoo ting Autonomous Access Points Low Power Condition for Autonomous A ccess Points • %CDP_PD-4.
3-9 Cisco Aironet 1130AG Series Access Point Hardware Installation Gu ide OL-8369-05 Chapter 3 Troubleshooting Auto nomous Access Points Low Power Condition for Autonomous Access Points • %CDP_PD-2-.
3-10 Cisco Aironet 1130AG Series Access Po int Hardware Installation Guide OL-8369-05 Chapter 3 Troubleshoo ting Autonomous Access Points Low Power Condition for Autonomous A ccess Points Configuring .
3-11 Cisco Aironet 1130AG Series Access Point Hardware Installation Gu ide OL-8369-05 Chapter 3 Troubleshooting Auto nomous Access Points Low Power Condition for Autonomous Access Points Refer to Table 3-2 for information on when to use this special Cisco IOS command and the corresponding Ci sco switch power command.
3-12 Cisco Aironet 1130AG Series Access Po int Hardware Installation Guide OL-8369-05 Chapter 3 Troubleshoo ting Autonomous Access Points Low Power Condition for Autonomous A ccess Points Configuring the Access Point System Power Settings Using a Browser You can also use your browser to set the access point System Power Settings.
3-13 Cisco Aironet 1130AG Series Access Point Hardware Installation Gu ide OL-8369-05 Chapter 3 Troubleshooting Auto nomous Access Points Low Power Condition for Autonomous Access Points Follow these .
3-14 Cisco Aironet 1130AG Series Access Po int Hardware Installation Guide OL-8369-05 Chapter 3 Troubleshoo ting Autonomous Access Points Running the Carrier Busy Test Step 4 If you are us ing a power injector with a Cisco switch, choose one of these Power sett ing options: a.
3-15 Cisco Aironet 1130AG Series Access Point Hardware Installation Gu ide OL-8369-05 Chapter 3 Troubleshooting Auto nomous Access Points Running the Pi ng Test Running the Ping Test You can use the ping test to evalua te th e link to and from a n associated wirele ss device.
3-16 Cisco Aironet 1130AG Series Access Po int Hardware Installation Guide OL-8369-05 Chapter 3 Troubleshoo ting Autonomous Access Points Resetting to th e Default Configuration Using the MODE Button .
3-17 Cisco Aironet 1130AG Series Access Point Hardware Installation Gu ide OL-8369-05 Chapter 3 Troubleshooting Auto nomous Access Points Reloading the Access Point Image Step 7 Click Reset to Defaults . Note If the access point is configur ed with a static IP address, the IP address does not change.
3-18 Cisco Aironet 1130AG Series Access Po int Hardware Installation Guide OL-8369-05 Chapter 3 Troubleshoo ting Autonomous Access Points Reloading the A ccess Point Image Step 9 Hold the MODE button until the Radio LED turns a red color (approximately 20 t o 30 seconds), and release the MODE button.
3-19 Cisco Aironet 1130AG Series Access Point Hardware Installation Gu ide OL-8369-05 Chapter 3 Troubleshooting Auto nomous Access Points Obtaining the Access Point Image File Browser TFTP Interface The TFTP interface allows you to use a TFTP server on a network device to load the access point image file.
3-20 Cisco Aironet 1130AG Series Access Po int Hardware Installation Guide OL-8369-05 Chapter 3 Troubleshoo ting Autonomous Access Points Connecting to the Acc e ss Point Console Port Step 7 Click WIRELESS LAN for an ac ce ss po in t i ma ge fi le , s uc h a s c1130-k9w 7-tar.
3-21 Cisco Aironet 1130AG Series Access Point Hardware Installation Gu ide OL-8369-05 Chapter 3 Troubleshooting Auto nomous Access Points Obtaining the TFTP Server Software Figur e 3-3 Console P or t Location Step 3 Set up a terminal emulator on your PC to communicat e with the access point.
3-22 Cisco Aironet 1130AG Series Access Po int Hardware Installation Guide OL-8369-05 Chapter 3 Troubleshoo ting Autonomous Access Points Obtaining the TFTP Server Software.
CH A P T E R 4-1 Cisco Aironet 1130AG Series Access Point Hardware Installation Gu ide OL-8369-05 4 Troubleshooting Lightweight Access Points This chapter pr ovides troubleshootin g procedures for basic problems with the 11 30AG series lightweight access poin t (model: AIR-LAP1131AG or AIR-LAP1131G ).
4-2 Cisco Aironet 1130AG Series Access Po int Hardware Installation Guide OL-8369-05 Chapter 4 Troub leshooting Lightweight Access Points Guidelines for Using 1130AG Se ries Lightweight Access Points .
4-3 Cisco Aironet 1130AG Series Access Point Hardware Installation Gu ide OL-8369-05 Chapter 4 Troubleshooting Lightweig ht Access Points Checking the Ligh tweight Access Point LEDs Figur e 4-1 Access.
4-4 Cisco Aironet 1130AG Series Access Po int Hardware Installation Guide OL-8369-05 Chapter 4 Troub leshooting Lightweight Access Points Checking the Lightweight Acc ess Point LEDs The LED signals are listed in Table 4-1 .
4-5 Cisco Aironet 1130AG Series Access Point Hardware Installation Gu ide OL-8369-05 Chapter 4 Troubleshooting Lightweig ht Access Points Checking the Ligh tweight Access Point LEDs Boot loader errors Red Red Red DRAM memory test failure. Off Red Blinking red and blue Flash file system failure.
4-6 Cisco Aironet 1130AG Series Access Po int Hardware Installation Guide OL-8369-05 Chapter 4 Troub leshooting Lightweight Access Points Low Power Condition for Li ghtweight Access Points Low Power Condition for Lightweight Access Points War nin g This product must be conn ected to a Power over Ethernet (PoE) IEEE 802.
4-7 Cisco Aironet 1130AG Series Access Point Hardware Installation Gu ide OL-8369-05 Chapter 4 Troubleshooting Lightweig ht Access Points Low Power Condition for Lightweight Access Points Some Cisco switches that are capabl e of supplying sufficient power requir e a software upgrade to support Intelligent Power Management.
4-8 Cisco Aironet 1130AG Series Access Po int Hardware Installation Guide OL-8369-05 Chapter 4 Troub leshooting Lightweight Access Points Manually Configuring Co ntroller Information Usin g the Ac ces.
4-9 Cisco Aironet 1130AG Series Access Point Hardware Installation Gu ide OL-8369-05 Chapter 4 Troubleshooting Lightweig ht Access Points Returning the Acc ess Point to Autonomous Mode Configuring Con.
4-10 Cisco Aironet 1130AG Series Access Po int Hardware Installation Guide OL-8369-05 Chapter 4 Troub leshooting Lightweight Access Points Returning the Access Poin t to Autonomous Mode Using a WLAN C.
4-11 Cisco Aironet 1130AG Series Access Point Hardware Installation Gu ide OL-8369-05 Chapter 4 Troubleshooting Lightweig ht Access Points Obtaining the Autonomous Access Point Image File MODE Button Setting The lightweight access point MODE b utton is configured from you r Cisco Wireless LAN Controller.
4-12 Cisco Aironet 1130AG Series Access Po int Hardware Installation Guide OL-8369-05 Chapter 4 Troub leshooting Lightweight Access Points Connecting to the Acc e ss Point Console Port Connecting to t.
4-13 Cisco Aironet 1130AG Series Access Point Hardware Installation Gu ide OL-8369-05 Chapter 4 Troubleshooting Lightweig ht Access Points Obtaining the TFTP Server Software Obtaining the TFTP Server Software You can do wnload TFTP server so ftware from several web sites.
4-14 Cisco Aironet 1130AG Series Access Po int Hardware Installation Guide OL-8369-05 Chapter 4 Troub leshooting Lightweight Access Points Obtaining the TFTP Server Software.
A-1 Cisco Aironet 1130AG Series Access Point Hardware Installation Guide OL-8369-05 APPENDIX A Translated Safety Warnings For translated safety warnin gs, re f er to th e safet y war ning docu ment t hat shipped with your access p oint o r th at is available on Cisco.
A-2 Cisco Aironet 1130AG Series Access Point Hardware Installation Guide OL-8369-05 Appendix A Tran slated Safety Warnings.
B-1 Cisco Aironet 1130AG Series Access Point Hardware Installation Guide OL-8369-05 APPENDIX B Declarations of Conformity and Regulatory Information This appendix prov ides declarations of conformit y and regulatory informati on for the Cisco Aironet 1130AG Series Access Points and the Cisco Aironet 1130AG Series Lightwei ght Access Points.
B-2 Cisco Aironet 1130AG Series Access Point Hardware Installation Guide OL-8369-05 Appendix B Declarations of Conformity and Regul atory In formation Manufacturers Federal Communication Commissi on D.
B-3 Cisco Aironet 1130AG Series Access Po int Hardware Installation Guide OL-8369-05 Appendix B Declarations of Conformity and Regulatory Info rmation VCCI Statement for Japan Caution The Part 15 radio devi ce operates on a non-interference basis with other device s operating at this frequency when using the integrat ed antennas.
B-4 Cisco Aironet 1130AG Series Access Point Hardware Installation Guide OL-8369-05 Appendix B Declarations of Conformity and Regul atory In formation Industry Canada Industry Canada Models: AIR-AP113.
B-5 Cisco Aironet 1130AG Series Access Po int Hardware Installation Guide OL-8369-05 Appendix B Declarations of Conformity and Regulatory Info rmation European Community, Switzerland, Norway, Iceland,.
B-6 Cisco Aironet 1130AG Series Access Point Hardware Installation Guide OL-8369-05 Appendix B Declarations of Conformity and Regul atory In formation European Commun ity, Switzerland, Nor way, Iceland, and Liec htenstein This device complies with the EMC requi rements (EN 60601-1-2) of the Medical Directi ve 93/42/EEC.
B-7 Cisco Aironet 1130AG Series Access Po int Hardware Installation Guide OL-8369-05 Appendix B Declarations of Conformity and Regulatory Info rmation Declaration of Confor mity for RF Exposure For 54 Mbps, 5 GHz access points, the following standards were applied: • Radio: EN 301.
B-8 Cisco Aironet 1130AG Series Access Point Hardware Installation Guide OL-8369-05 Appendix B Declarations of Conformity and Regul atory In formation Guidelines for Operating Cisco Aironet Access Po .
B-9 Cisco Aironet 1130AG Series Access Po int Hardware Installation Guide OL-8369-05 Appendix B Declarations of Conformity and Regulatory Info rmation Administrative Rules for Cisco Aironet Access Poi.
B-10 Cisco Aironet 1130AG Series Access Point Hardware Installation Guide OL-8369-05 Appendix B Declarations of Conformity and Regul atory In formation Administrative Rules for Cisco Ai ronet Access P.
B-11 Cisco Aironet 1130AG Series Access Po int Hardware Installation Guide OL-8369-05 Appendix B Declarations of Conformity and Regulatory Info rmation Declaration of Conf ormity Statements Declaration of Conformity Statements All the Declaration of Conformi ty statements related to this pr oduct can be found at the following URL: http://www.
B-12 Cisco Aironet 1130AG Series Access Point Hardware Installation Guide OL-8369-05 Appendix B Declarations of Conformity and Regul atory In formation Declaration of Con formity Statements DECLARATION OF CONFORMITY with regard to the R&TTE Directive 1999/5/EC according to EN 45014 Cisco Systems Inc.
B-13 Cisco Aironet 1130AG Series Access Po int Hardware Installation Guide OL-8369-05 Appendix B Declarations of Conformity and Regulatory Info rmation Declaration of Conf ormity Statements Annex to DofC# 441919 1. Information on Antennas and Power Levels The AIR-(L)AP1131AG-E-K9 has integral a ntennas.
B-14 Cisco Aironet 1130AG Series Access Point Hardware Installation Guide OL-8369-05 Appendix B Declarations of Conformity and Regul atory In formation Declaration of Con formity Statements.
C-1 Cisco Aironet 1130AG Series Access Point Hardware Installation Guide OL-8369-05 APPENDIX C Access Point Specifications Table C-1 lists the technical specif ications for the 1130AG series access point. Ta b l e C-1 Access P oint Specifications Category 802.
C-2 Cisco Aironet 1130AG Series Access Point Hardware Installation Guide OL-8369-05 Appendix C Access Point Specificatio ns Power Output 100 mW ( 20 dBm) 50 mW (17 dBm) 25 mW (14 dBm) 10 mW (11 dBm) 5.
C-3 Cisco Aironet 1130AG Series Access Po int Hardware Installation Guide OL-8369-05 Appendix C Ac cess Point Specifications Compliance The 1130AG series access point co mplies with UL 2043 for products installed in a building’s environmental ai r handling spaces, such as above suspended ceilings.
C-4 Cisco Aironet 1130AG Series Access Point Hardware Installation Guide OL-8369-05 Appendix C Access Point Specificatio ns.
D-1 Cisco Aironet 1130AG Series Access Point Hardware Installation Guide OL-8369-05 APPENDIX D Channels and Maximum Power Levels For channel and maximum power level settings, refer to the Channels and.
D-2 Cisco Aironet 1130AG Series Access Point Hardware Installation Guide OL-8369-05 Appendix D Channels and Maximum Power Levels.
E-1 Cisco Aironet 1130AG Series Access Point Hardware Installation Guide OL-8369-05 APPENDIX E Console Cable Pinouts This appendix id entifi es the pinouts for the serial console cable that connects to the access point’s serial console port.
E-2 Cisco Aironet 1130AG Series Access Point Hardware Installation Guide OL-8369-05 Appendix E Console Cable Pinouts Overview Overview The access point requires a special se rial cable that connect s the access point serial console port (RJ-45 connector) to your PC’s COM po rt (DB-9 connecto r).
F-1 Cisco Aironet 1130AG Series Access Point Hardware Installation Guide OL-8369-05 APPENDIX F Priming Lightweight Access Points Prior to Deployment This section describes an optional procedure design.
F-2 Cisco Aironet 1130AG Series Access Point Hardware Installation Guide OL-8369-05 Appendix F Primin g Lightweight Access Points Prior to Deployment Before deploying your lightweight access point s t.
F-3 Cisco Aironet 1130AG Series Access Po int Hardware Installation Guide OL-8369-05 Appendix F Priming Lightwei ght Access Points Prior to Deployment Step 6 If the operating system download is successful , the lightweight access point reboo ts. Normal operation is indicated when the radio LED is blinking to indicate radio activity.
F-4 Cisco Aironet 1130AG Series Access Point Hardware Installation Guide OL-8369-05 Appendix F Primin g Lightweight Access Points Prior to Deployment.
G-1 Cisco Aironet 1130AG Series Access Point Hardware Installation Guide OL-8369-05 APPENDIX G Configuring DHCP Option 43 for Lightweight Access Points This appendix describes th e steps needed to con.
G-2 Cisco Aironet 1130AG Series Access Point Hardware Installation Guide OL-8369-05 Appendix G Configuring DHCP Option 43 for Lightweight Access Points Overview Overview This section contains a DHCP Option 43 configur ation example on a Windows 2003 Enterpr ise DHCP server for use with Cisco Airone t ligh tweight access points.
G-3 Cisco Aironet 1130AG Series Access Po int Hardware Installation Guide OL-8369-05 Appendix G Configuring DHCP Option 43 for Lightw eight Access Points Configuring Option 43 for 1000 and 1500 Series.
G-4 Cisco Aironet 1130AG Series Access Point Hardware Installation Guide OL-8369-05 Appendix G Configuring DHCP Option 43 for Lightweight Access Points Configuring Option 43 for 1100 , 1130, 1200, 124.
GL-1 Cisco Aironet 1130AG Series Access Po int Hardware Installation Guide OL-8369-05 GLOSSARY 802.3af The IEEE standard that describes a mech anism for Power over Ethernet (PoE). The standard provides the cap ability to deliver both p ower and data over standard Ethernet cabling.
Glossary GL-2 Cisco Aironet 1130AG Series Access Po int Hardware Installation Guide OL-8369-05 B beacon A wireless LAN packet that si gna ls the availability and presence of the wireless device.
Glossar y GL-3 Cisco Aironet 1130AG Series Access Po int Hardware Installation Guide OL-8369-05 DHCP Dynamic host configuration proto col. A protocol available with many operating systems that automa tically issues IP addresses within a specified range to devices on the network.
Glossary GL-4 Cisco Aironet 1130AG Series Access Po int Hardware Installation Guide OL-8369-05 ] I IEEE Institute of Electrical and Electronic E n gineer s. A professional society serving electrical engineers through its publ ications, conferences, and standards development activities.
Glossar y GL-5 Cisco Aironet 1130AG Series Access Po int Hardware Installation Guide OL-8369-05 P packet A basic message unit for communication across a network . A packet usually includes routi ng information, data, and sometime s error detection in formation.
Glossary GL-6 Cisco Aironet 1130AG Series Access Po int Hardware Installation Guide OL-8369-05 U UNII Unlicensed National Information Infras t ructure—regulations for UNII devices operating in the 5 .15 to 5.35 GHz and 5.725 to 5.825 GHz frequency band s.
IN-1 Cisco Aironet 1130AG Series Access Po int Hardware Installation Guide OL-8369-05 INDEX A access point image 3-17 antenna connectors C-2 B basic sett ings, checki ng 3-4 bridge confi guration 1-1 .
Index IN-2 Cisco Aironet 1130AG Series Access Po int Hardware Installation Guide OL-8369-05 P package contents 2-3 password reset 3-15 pinouts, serial cable E-2 power connecting 2-21 input C-1 output .
Een belangrijk punt na aankoop van elk apparaat Cisco Systems 1130AG (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Cisco Systems 1130AG heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Cisco Systems 1130AG vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Cisco Systems 1130AG leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Cisco Systems 1130AG krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Cisco Systems 1130AG bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Cisco Systems 1130AG kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Cisco Systems 1130AG . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.