Gebruiksaanwijzing /service van het product 3560-C van de fabrikant Cisco Systems
Ga naar pagina of 92
Americas Headquarters Cisco Systems, In c. 170 West Tasman Drive San Jose, CA 951 34-1706 USA http://www.ci sco.com Tel: 408 526-4000 800 553-NETS (638 7) Fax: 408 527-0883 Catal yst 3560-C and 2960-C.
THE SPECIFICATION S AND INFORMATION REGARDING TH E PRODUCTS IN THIS MANUAL ARE SUBJECT TO CHANGE WITH OUT NOTICE. ALL STATEMENTS , INFORMATION, AND RECOMMENDATI ONS IN THI S MANUAL ARE BE LIEVED TO BE A CCURATE BUT ARE PRESENTED WI THOUT WARRANTY OF ANY KIND, EX PRESS OR IMPLIED.
iii Catalyst 3560-C and 2960-C Switch Hardware Installation Guide OL-23803-02 CONTENTS Preface vii Related Publication s i-viii Obtaining Documentation and Submitting a Serv ice Request i-viii CHAPTER.
Contents iv Catalyst 3560-C and 2960-C Switch Hardware Inst allation Guide OL-23803-02 CHAPTER 2 Switch Installation 2-1 Preparing for Installation 2-1 Warnings 2-1 Installation Guidelines 2-3 Equipme.
Contents v Catalyst 3560-C and 2960-C Switch Hardware Installation Guide OL-23803-02 Switch LEDs 3-2 Switch Connections 3-2 Bad or Damaged Ca ble 3-2 Ethernet and Fib er-Optic Cables 3-2 Link Status 3.
Contents vi Catalyst 3560-C and 2960-C Switch Hardware Inst allation Guide OL-23803-02 Uninstalling the Cisco Microsoft Windows XP and 20 00 USB Driver C-6 Uninstalling the Cisco Microsoft Windows Vis.
vii Catalyst 3560-C and 2960-C Switch Hardware Installation Guide OL-23803-02 Preface This guide describes the hardware features of the Ca talyst 3560- C and 2960-C switches. It describes the physical and performance ch aracteristics of the switc h, explains ho w to install it , and provid es troubleshooting i nformation.
viii Catalyst 3560-C and 2960-C Switch Hardware Inst allation Guide OL-23803-02 Preface Related Publications Related Publications http://www .cisco.com/g o/cat3560c_docs http://www .cisco.com/g o/cat2960c_docs Note Before installing, conf iguring, or upgradin g th e switch, see the rele ase notes on Cisco.
CH A P T E R 1-1 Catalyst 3560-C and 2960-C Switch Hardware Installati on Guide OL-23803-02 1 Product Overview The Catalyst 3560-C and 2960 -C of switches, also referred to as the switch , are Ethe rn.
1-2 Catalyst 3560-C and 2960-C Switch Hardware Inst allation Guide OL-23803-02 Chapter 1 Produ ct Overview Front Pan el Front Panel • 8 or 12 do wnlink Ethernet ports of one of these types: – 10/1.
1-3 Catalyst 3560-C and 2960-C Switch Hardware Installati on Guide OL-23803-02 Chapter 1 Product Overview Front Panel Figure 1 -1 Catalyst 2960CPD-8PT -L Fr ont Panel V iew Figure 1 -2 Catalyst 3560CG.
1-4 Catalyst 3560-C and 2960-C Switch Hardware Inst allation Guide OL-23803-02 Chapter 1 Produ ct Overview Front Pan el Figure 1 -3 Catalyst 3560 CPD-8PT -S Fr ont P anel View Figure 1 -4 Catalyst 296.
1-5 Catalyst 3560-C and 2960-C Switch Hardware Installati on Guide OL-23803-02 Chapter 1 Product Overview Front Panel Figur e 1 -5 Catal yst 3560C -12PC-S F ront P anel V iew 10/100 and 10/100/1000 Fast Ethernet Downlink Ports Y o u can set the 10/100 ports t o operate at 10 or 100 Mb/s i n full-duplex or half-duple x mode.
1-6 Catalyst 3560-C and 2960-C Switch Hardware Inst allation Guide OL-23803-02 Chapter 1 Produ ct Overview Front Pan el All 8 or 12 do wnlink ports on the Catalyst,35 60C G-8PC-S, 3560C- 8PC-S, and 3560C-12PC-S swit ches are PoE+ capable. The maximum switch power output is 123.
1-7 Catalyst 3560-C and 2960-C Switch Hardware Installati on Guide OL-23803-02 Chapter 1 Product Overview Front Panel Figure 1 -6 P oE Pass-Thr oug h The av ailable switch PoE b udget depends upo n the PoE sent from the u plink switch. See Ta b l e 1 - 2 .
1-8 Catalyst 3560-C and 2960-C Switch Hardware Inst allation Guide OL-23803-02 Chapter 1 Produ ct Overview Front Pan el PoE Uplink Ports (Catalys t 2960CPD-8TT-L, 2960CPD-8 PT-L, and 3560CPD-8PT-S) The 10/100/1000 PoE upl ink ports on the Catalyst 296 0CPD-8TT -L and 2960CPD-8PT -L can receiv e po wer from a PoE or PoE+ switch.
1-9 Catalyst 3560-C and 2960-C Switch Hardware Installati on Guide OL-23803-02 Chapter 1 Product Overview Front Panel PoE-Capable Downlink Ports (Catalyst 2960C PD-8PT-L, 3560CG-8PC- S, 3560CPD-8PT-S,.
1-10 Catalyst 3560-C and 2960-C Switch Hardware Inst allation Guide OL-23803-02 Chapter 1 Produ ct Overview Front Pan el • GLC-FE-100BX-U= • CWDM SFPs For information about SFP modules, see your SFP module documentation and the “Installing SFP Modules” section on page 2-31 .
1-11 Catalyst 3560-C and 2960-C Switch Hardware Installati on Guide OL-23803-02 Chapter 1 Product Overview Front Panel LEDs Y ou can use the switch system and port LEDs to monitor switch activity and performance. Switch Panel LEDs Figure 1 -8 Switc h LEDs 1 Mode button 5 SPD LED (speed) 2 SYST LED (system) 6 PoE LED 1 1.
1-12 Catalyst 3560-C and 2960-C Switch Hardware Inst allation Guide OL-23803-02 Chapter 1 Produ ct Overview Front Pan el System LED Console LEDs The console LEDs show which console port is in use.
1-13 Catalyst 3560-C and 2960-C Switch Hardware Installati on Guide OL-23803-02 Chapter 1 Product Overview Front Panel Modes for Port LEDs The port LEDs, as a g roup or individually , displa y information about the swi tch and abou t the individual ports ( Ta b l e 1 - 5 ).
1-14 Catalyst 3560-C and 2960-C Switch Hardware Inst allation Guide OL-23803-02 Chapter 1 Produ ct Overview Front Pan el PoE LED Even if the PoE mode is no t selected, the LED sho ws PoE problems when they are det ected ( Ta b l e 1 - 8 ). The PoE LED is only on the switch es that support PoE.
1-15 Catalyst 3560-C and 2960-C Switch Hardware Installati on Guide OL-23803-02 Chapter 1 Product Overview Rear Panel Figur e 1 -9 Dual-Pur pose LEDs Rear Panel • A reset bu tton • A security slot.
1-16 Catalyst 3560-C and 2960-C Switch Hardware Inst allation Guide OL-23803-02 Chapter 1 Produ ct Overview Rear Panel Figur e 1 -1 1 Catalyst 3560CG-8PC-S S witch Rear P anel Internal Power Supply All switches excep t the Catalyst 2960CPD-8TT -L, 2960CPD-8PT -L, and 3560CPD-8PT -S are powered through their internal po wer supplies.
1-17 Catalyst 3560-C and 2960-C Switch Hardware Installati on Guide OL-23803-02 Chapter 1 Product Overview Management Options Security Slots The switches hav e security slots on the rear panel. Y ou can install an optional cable lock, such as the type that is used to secure a l apt op computer , to secure the switch.
1-18 Catalyst 3560-C and 2960-C Switch Hardware Inst allation Guide OL-23803-02 Chapter 1 Produ ct Overview Network Configurations • Cisco IOS CLI The switch CLI is ba sed on Cisco IOS s oftware and supports deskto p-switching feature s. Y o u can config ure and monitor the swit ch and switch cluste r members from the CLI.
CH A P T E R 2-1 Catalyst 3560-C and 2960-C Switch Hardware Installati on Guide OL-23803-02 2 Switch Installation This chapter describes ho w to start your switch and ho w to interpret the po wer- on self-test (POST) that ensures proper operation. I t also describes ho w to install the switch.
2-2 Catalyst 3560-C and 2960-C Switch Hardware Inst allation Guide OL-23803-02 Chapter 2 Switch Installatio n Preparing for Installation War ni ng Read the wall-mounting in structions carefully before beginning in stallation.
2-3 Catalyst 3560-C and 2960-C Switch Hardware Installati on Guide OL-23803-02 Chapter 2 Switch Installation Preparing for Installation War ni n g For connections outside the build ing where the equip.
2-4 Catalyst 3560-C and 2960-C Switch Hardware Inst allation Guide OL-23803-02 Chapter 2 Switch Installatio n Powering the Switch • T emperature around the unit does not e xceed 113°F (45°C). If the switch is installed in a closed en vironment or in a multirack assembly , the temperature around it might be greater than nor mal room temperature.
2-5 Catalyst 3560-C and 2960-C Switch Hardware Installati on Guide OL-23803-02 Chapter 2 Switch Installation Verifying Switch Operation Note Y ou can use both the u plink port and t he auxiliar y po wer adapter . Howe ver , the auxiliary power input takes preced ence.
2-6 Catalyst 3560-C and 2960-C Switch Hardware Inst allation Guide OL-23803-02 Chapter 2 Switch Installatio n Mounting the Switch On a Desk or Shelf (without Mounting Screws) Step 1 Locate the adhesiv e strip with the ru bber feet in the accessory kit.
2-7 Catalyst 3560-C and 2960-C Switch Hardware Installati on Guide OL-23803-02 Chapter 2 Switch Installation Mounting the Switch Figure 2-1 Installing the Mo unting Screws on T op of a Desk or a Shelf Step 3 Peel the adhesi ve strip of f the bottom of the scre w template, and attach it to the top of the desk or shelf.
2-8 Catalyst 3560-C and 2960-C Switch Hardware Inst allation Guide OL-23803-02 Chapter 2 Switch Installatio n Mounting the Switch Figur e 2-2 Mounting the S witch on T op of a Desk or Shelf After you mount the switch, see the “ After Installing the Switch” section on page 2-31 for info rmation about conf iguring the switch.
2-9 Catalyst 3560-C and 2960-C Switch Hardware Installati on Guide OL-23803-02 Chapter 2 Switch Installation Mounting the Switch Figure 2-3 Installin g the Moun ting Screws Under a Desk or Shelf Step 4 Use a 0.144-inch (3.7 mm) or a #27 d rill bit to drill a 1 /2-inch (12.
2-10 Catalyst 3560-C and 2960-C Switch Hardware Inst allation Guide OL-23803-02 Chapter 2 Switch Installatio n Mounting the Switch Figur e 2-4 Mounting the Switc h Under a Desk or Shelf After you mount the switch, see the “ After Installing the Switch” section on page 2-31 for info rmation about conf iguring the switch.
2-11 Catalyst 3560-C and 2960-C Switch Hardware Installati on Guide OL-23803-02 Chapter 2 Switch Installation Mounting the Switch Step 1 Locate the scre w template. The template is used to ali gn the mounting scre w holes. Note Figure 2-5 sho ws the measurements for the loca tion of the screws on the switch.
2-12 Catalyst 3560-C and 2960-C Switch Hardware Inst allation Guide OL-23803-02 Chapter 2 Switch Installatio n Mounting the Switch Figure 2-6 Installing th e Mounting Screws on the W all Figure 2-7 Installing th e Switc h on a W all Step 8 Place the switch onto the mo unting scre ws, and slide it do wn until it locks in place.
2-13 Catalyst 3560-C and 2960-C Switch Hardware Installati on Guide OL-23803-02 Chapter 2 Switch Installation Mounting the Switch With a Mounting Tray The mounting kit (part number CMP-MGNT -TRA Y=) is optional. Y ou can order it when you or der your switch, or you can order it l ater from your Cisco representati ve.
2-14 Catalyst 3560-C and 2960-C Switch Hardware Inst allation Guide OL-23803-02 Chapter 2 Switch Installatio n Mounting the Switch Step 4 Place the switch onto th e mounting scre ws, and slide the switch until it l ocks into place.
2-15 Catalyst 3560-C and 2960-C Switch Hardware Installati on Guide OL-23803-02 Chapter 2 Switch Installation Mounting the Switch Step 5 Use the two number -10 Phillips pan-head scre ws to secure the mounting tr ay to the switch.
2-16 Catalyst 3560-C and 2960-C Switch Hardware Inst allation Guide OL-23803-02 Chapter 2 Switch Installatio n Mounting the Switch Step 1 Place the switch on the mounting tray .
2-17 Catalyst 3560-C and 2960-C Switch Hardware Installati on Guide OL-23803-02 Chapter 2 Switch Installation Mounting the Switch War ni n g Read the wall-mounting in structions carefully before beginning in stallation.
2-18 Catalyst 3560-C and 2960-C Switch Hardware Inst allation Guide OL-23803-02 Chapter 2 Switch Installatio n Mounting the Switch In a Rack Installing the switch in a rack r equires an optional br acket kit that is not included with t he switch.
2-19 Catalyst 3560-C and 2960-C Switch Hardware Installati on Guide OL-23803-02 Chapter 2 Switch Installation Mounting the Switch Figure 2-15 sh ows ho w to attach a 23-inch bracket to one side of the switch. F ollo w the same steps to attach the second bracket to the opposite side.
2-20 Catalyst 3560-C and 2960-C Switch Hardware Inst allation Guide OL-23803-02 Chapter 2 Switch Installatio n Mounting the Switch On a DIN Rail The DIN-mount kit (part number CMP-DIN- MNT=) is optional. Y ou can order it when you order your switch, or you can order it l ater from your Cisco representati ve.
2-21 Catalyst 3560-C and 2960-C Switch Hardware Installati on Guide OL-23803-02 Chapter 2 Switch Installation Mounting the Switch Step 2 Use the two number -10 Phillips pan-head scre ws to secure the DIN rail mount to the switch.
2-22 Catalyst 3560-C and 2960-C Switch Hardware Inst allation Guide OL-23803-02 Chapter 2 Switch Installatio n Mounting the Switch Figure 2-19 Mounting the Switch on a DIN Rail Step 2 Rotate the switch do wn towa rd the DIN rail until the release t abs on the DIN rail mount clicks.
2-23 Catalyst 3560-C and 2960-C Switch Hardware Installati on Guide OL-23803-02 Chapter 2 Switch Installation Mounting the Switch Removing the Switch from a DIN Rail Step 1 Ensure that power i s remov ed from the switch, and disconnect all cables and connectors from the front panel of th e switch.
2-24 Catalyst 3560-C and 2960-C Switch Hardware Inst allation Guide OL-23803-02 Chapter 2 Switch Installatio n Installing a Cover for t he Reset Button (Optional) Installing a Cover for the Reset Button (Optional) Y o u can cov er the reset button to prev ent accidental or unauthorized reset of your switch.
2-25 Catalyst 3560-C and 2960-C Switch Hardware Installati on Guide OL-23803-02 Chapter 2 Switch Installation Installing the Power Cord Retainer (Optional) Installing the Power Cord Retainer (Optional) Note This section applies to sw itches with an A C po wer connector .
2-26 Catalyst 3560-C and 2960-C Switch Hardware Inst allation Guide OL-23803-02 Chapter 2 Switch Installatio n Installing the Po wer Cord Retain er (Optional) Step 3 Slide the retainer throu gh the first l atch. See Figure 2-24 . Figure 2-24 Sliding the Re tainer Thr ough the Latch Step 4 Slide the retainer throu gh the other latches to lock it.
2-27 Catalyst 3560-C and 2960-C Switch Hardware Installati on Guide OL-23803-02 Chapter 2 Switch Installation Installing the Power Cord Retainer (Optional) Figure 2-26 Sleeve Around the P ower Cord Step 6 Secure the A C po wer cord by pressing on the retainer .
2-28 Catalyst 3560-C and 2960-C Switch Hardware Inst allation Guide OL-23803-02 Chapter 2 Switch Installatio n Installing the Cabl e Guard (Optional) Installing the Cable Guard (Optional) The cable guard pre vents tampering with the cables after the cables are installed.
2-29 Catalyst 3560-C and 2960-C Switch Hardware Installati on Guide OL-23803-02 Chapter 2 Switch Installation Installing the Cable Guard (Optional) Step 2 Use the supplied number -10 pan-head scre ws to attach the cable guard to the switch. See Figure 2-29 .
2-30 Catalyst 3560-C and 2960-C Switch Hardware Inst allation Guide OL-23803-02 Chapter 2 Switch Installatio n Installing the Cabl e Guard (Optional) Figure 2-31 Attac hing the Cables to the S witch Step 4 Guide the connected cables through th e slots in the front of the cable guard.
2-31 Catalyst 3560-C and 2960-C Switch Hardware Installati on Guide OL-23803-02 Chapter 2 Switch Installation After Installing the Switch Step 5 (Optional) T o attach the cable guard t o the desk or wall , use a 0.144-inch (3.7 mm) or a #27 drill b it to drill 1/2-inch (1 2.
2-32 Catalyst 3560-C and 2960-C Switch Hardware Inst allation Guide OL-23803-02 Chapter 2 Switch Installatio n Removing SFP Modules War ni ng Class 1 laser product. Statement 1008 Step 1 Attach an ESD-pre venti ve wrist strap to your w rist and to a bare metal surf ace.
2-33 Catalyst 3560-C and 2960-C Switch Hardware Installati on Guide OL-23803-02 Chapter 2 Switch Installation Connecting De vices to the Ethernet Ports Figure 2-35 Removing a Bale -Clasp Latc h SFP Mo.
2-34 Catalyst 3560-C and 2960-C Switch Hardware Inst allation Guide OL-23803-02 Chapter 2 Switch Installatio n Connecting Devices to the Eth ernet Ports Figur e 2-36 Connecting to an Ether net P ort C.
2-35 Catalyst 3560-C and 2960-C Switch Hardware Installati on Guide OL-23803-02 Chapter 2 Switch Installation Where to Go Next restricted access location and users and service people wh o are authorized within the re stricted access location are made aware of the haza rd.
2-36 Catalyst 3560-C and 2960-C Switch Hardware Inst allation Guide OL-23803-02 Chapter 2 Switch Installatio n Where to Go Ne xt.
CH A P T E R 3-1 Catalyst 3560-C and 2960-C Switch Hardware Installati on Guide OL-23803-02 3 Troubleshooting • Diagnosing Problems, page 3- 1 • Resetting the Switch, page 3-5 • Finding the Switch Serial Number , page 3-5 Diagnosing Problems The switch LEDs pro vide troubleshooting informati on about the switch.
3-2 Catalyst 3560-C and 2960-C Switch Hardware Inst allation Guide OL-23803-02 Chapter 3 Troubleshooting Diagnosing Prob lems Switch LEDs Look at the port LEDs informat ion when troublesh ooting the switch. See th e “LEDs” section on page 1-12 for a description of the LED colors and thei r meanings.
3-3 Catalyst 3560-C and 2960-C Switch Hardware Installati on Guide OL-23803-02 Chapter 3 Troubleshooting Diagnosing Problems 10/100 and 10/100/100 0 Port Connections A port appears to malfun ction: • V erify the status of all po rts. See T able 1-7 on page 1-14 for descriptions of the LEDs and their meanings.
3-4 Catalyst 3560-C and 2960-C Switch Hardware Inst allation Guide OL-23803-02 Chapter 3 Troubleshooting Diagnosing Prob lems Spanning Tree Loops STP loops can cause serious perfor mance issues that look lik e port or interface pr oblems. A unidirectional link can cause loops.
3-5 Catalyst 3560-C and 2960-C Switch Hardware Installati on Guide OL-23803-02 Chapter 3 Troubleshooting Resetting the Switch Resetting the Switch Note Resetting the switch reboots the swi tch. T o reset the switch: 1. At the switch prompt, enter ena ble , and press Return or Enter .
3-6 Catalyst 3560-C and 2960-C Switch Hardware Inst allation Guide OL-23803-02 Chapter 3 Troubleshooting Finding the Swit ch Serial Number Figure 3-2 Serial Number Locati on f o r the Catalyst 3560CG-.
3-7 Catalyst 3560-C and 2960-C Switch Hardware Installati on Guide OL-23803-02 Chapter 3 Troubleshooting Finding the Switch Serial Number Figur e 3-4 Serial Number Locati on f or the Catalyst 29 60C-8.
3-8 Catalyst 3560-C and 2960-C Switch Hardware Inst allation Guide OL-23803-02 Chapter 3 Troubleshooting Finding the Swit ch Serial Number.
A-1 Catalyst 3560-C and 2960-C Switch Hardware Installation Guide OL-23803-02 APPENDIX A Technical Specifications T able A -1 Environmental and Ph ysical Specific ations for the Catalyst 356 0-C and 2.
A-2 Catalyst 3560-C and 2960-C Switch Hardware Inst allation Guide OL-23803-02 Appendix A Technical Specific ations Phy sical Specifications W eight Catalyst 2960CPD-8TT -L Catalyst 2960CPD-8PT -L Cat.
A-3 Catalyst 3560-C and 2960-C Switch Hardware Installation Guide OL-23803-02 Appendix A T echnical Specifications T able A -2 Cata lyst 3560-C and 2960-C Switch Specifications Po wer Requirements A C input voltage 100 to 240 V A C (autoranging) • Catalyst 2960CPD-8TT -L: 0.
A-4 Catalyst 3560-C and 2960-C Switch Hardware Inst allation Guide OL-23803-02 Appendix A Technical Specific ations Pow er consumption 1 • Catal yst 2960CPD-8TT -L: 15 W , 51 BTUs per hour (A C) 14.
A-5 Catalyst 3560-C and 2960-C Switch Hardware Installation Guide OL-23803-02 Appendix A T echnical Specifications T able A -3 P oE Po wer Consumption Switch Consumption without PoE Consumption with PoE Available PoE Catalyst 2960CPD-8PT -L 14.5 W 43 W 1 51 W 2 22.
A-6 Catalyst 3560-C and 2960-C Switch Hardware Inst allation Guide OL-23803-02 Appendix A Technical Specific ations.
B-1 Catalyst 3560-C and 2960-C Switch Hardware Installation Guide OL-23803-02 APPENDIX B Connector and Cab le Specifications • Connector Specif ications, page B-1 • Cables and Adap ters, page B-3 .
B-2 Catalyst 3560-C and 2960-C Switch Hardware Inst allation Guide OL-23803-02 Appendix B Connec tor and Cable Specific ations Connector Specifications Figure B-2 1 0/ 1 00/1000 Port Pinouts SFP Modul.
B-3 Catalyst 3560-C and 2960-C Switch Hardware Installation Guide OL-23803-02 Appendix B Connect or and Cable Specifications Cables and Adapters Cables and Adapters • SFP Module Cables, page B-3 •.
B-4 Catalyst 3560-C and 2960-C Switch Hardware Inst allation Guide OL-23803-02 Appendix B Connec tor and Cable Specific ations Cables and Adapters Note When the fiber -optic cable span is less than 15.
B-5 Catalyst 3560-C and 2960-C Switch Hardware Installation Guide OL-23803-02 Appendix B Connect or and Cable Specifications Cables and Adapters Figur e B-8 Four T w isted-P air Cro ssov er Cable Schem atics for 1 0 00BASE-T P orts T o identify a crosso ver cable, hold the cable ends side-b y-side, with the tab at the back.
B-6 Catalyst 3560-C and 2960-C Switch Hardware Inst allation Guide OL-23803-02 Appendix B Connec tor and Cable Specific ations Cables and Adapters Ta b l e B - 3 lists the pinouts for the switch console port, RJ-45-to-DB-25 female DTE adapter , and the console device.
C-1 Catalyst 3560-C and 2960-C Switch Hardware Installation Guide OL-23803-02 APPENDIX C Configuring the Switch with the CLI Setup Program This appendix provides a command-line interface (CL I) setup procedure for a standalone sw itch. T o set up the switch by using Express Setup , see the Catalyst 3560-C an d 2960-C Switc h Getting Started Guide .
C-2 Catalyst 3560-C and 2960-C Switch Hardware Inst allation Guide OL-23803-02 Appendix C Con figuring the Switch w ith the CLI Setu p Program Accessing the CLI Throug h the Console Port Figure C-1 Co.
C-3 Catalyst 3560-C and 2960-C Switch Hardware Installation Guide OL-23803-02 Appendix C Configuring the Switch with the CL I Setup Program Accessing the CLI Through the Console Port USB Mini-Type B Console Port Step 1 If you are connecting the switch USB-mini console por t to a W indows-b ased PC for the first time, in stall a USB driv er .
C-4 Catalyst 3560-C and 2960-C Switch Hardware Inst allation Guide OL-23803-02 Appendix C Con figuring the Switch w ith the CLI Setu p Program Accessing the CLI Throug h the Console Port Step 4 Start the ter minal-emulation program on the PC or the terminal.
C-5 Catalyst 3560-C and 2960-C Switch Hardware Installation Guide OL-23803-02 Appendix C Configuring the Switch with the CL I Setup Program Accessing the CLI Through the Console Port Installing the Cisco Microsoft Windows 2000 USB Driver Step 1 Obtain the f ile Cisco_usbconsole_dri ver .
C-6 Catalyst 3560-C and 2960-C Switch Hardware Inst allation Guide OL-23803-02 Appendix C Con figuring the Switch w ith the CLI Setu p Program Accessing the CLI Throug h the Console Port Uninstalling .
C-7 Catalyst 3560-C and 2960-C Switch Hardware Installation Guide OL-23803-02 Appendix C Configuring the Switch with the CL I Setup Program Entering the Initial Configuration Information Step 4 When the Remov e the Program window appears, click Rem ove .
C-8 Catalyst 3560-C and 2960-C Switch Hardware Inst allation Guide OL-23803-02 Appendix C Con figuring the Switch w ith the CLI Setu p Program Entering the Initial Con figuration Information Step 3 Enter an ena ble secret pas sword, and pr ess Return .
C-9 Catalyst 3560-C and 2960-C Switch Hardware Installation Guide OL-23803-02 Appendix C Configuring the Switch with the CL I Setup Program Entering the Initial Configuration Information ! interface FastEthernet1/0/2 interface FastEthernet1/0/3 ! .
C-10 Catalyst 3560-C and 2960-C Switch Hardware Inst allation Guide OL-23803-02 Appendix C Con figuring the Switch w ith the CLI Setu p Program Entering the Initial Con figuration Information.
Een belangrijk punt na aankoop van elk apparaat Cisco Systems 3560-C (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Cisco Systems 3560-C heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Cisco Systems 3560-C vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Cisco Systems 3560-C leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Cisco Systems 3560-C krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Cisco Systems 3560-C bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Cisco Systems 3560-C kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Cisco Systems 3560-C . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
