Gebruiksaanwijzing /service van het product 3650 van de fabrikant Cisco Systems
Ga naar pagina of 94
v Catalyst 3650 Switch Hardware Installation Guide OL-29734-01 Preface Purpose This guide describes th e hardware features of the Catalyst 3650 switch es. It de scribes the physical and performance characteristics of each sw itch, ex plains ho w to install a switch, and provides troubleshooting i nformation.
vi Catalyst 3650 Switch Hard ware I nstallation Guide OL-29734-01 Preface The safety warnings for this product are transl ated into se v eral languages in th e Re gulat ory Compliance and Safety Information for t he Catalyst 3650 Swit ch that is a v ailable on Cisco.
CH A P T E R 1-1 Catalyst 3650 Switch Hardware Installation Guide OL-29734-01 1 Product Overview The Catalyst 3650 series switches are Ethe rnet switches to which you can connect devices such as Cisco IP Phones, Cisco W i reless Acce ss Points, workstations, and other network de vices such as servers, routers, and other switches.
1-2 Catalyst 3650 Switch Hard ware I nstallation Guide OL-29734-01 Chapter 1 Produ ct Overvi ew Switch Models Catalyst 3650-24TD-L LAN Base Stackable 24 10/100/1000 Eth ernet do wnlink ports, 2 1-Giga.
1-3 Catalyst 3650 Switch Hardware Installation Guide OL-29734-01 Chapter 1 Product Overvie w Switch Models Catalyst 3650-48TD-S IP Base Stackable 48 10/100/1000 Eth ernet do wnlink ports, 2 1-Gigabit .
1-4 Catalyst 3650 Switch Hard ware I nstallation Guide OL-29734-01 Chapter 1 Produ ct Overvi ew Front Pan el Front Panel This section describes the fro nt panel components: • 24 or 48 do wnlink port.
1-5 Catalyst 3650 Switch Hardware Installation Guide OL-29734-01 Chapter 1 Product Overvie w Front Panel Note The illustrations of the Cat alyst 3650 switch are not intended to d epict any particul ar color scheme. They are pro v ided as a reference for vari ous features and markings d escribed within th is guide.
1-6 Catalyst 3650 Switch Hard ware I nstallation Guide OL-29734-01 Chapter 1 Produ ct Overvi ew Front Pan el 10/100/1000 Ethernet Ports The 10/100/1000 Ether net ports use RJ-45 connectors with Eth ernet pinouts. The maximum cable lengt h is 328 feet (100 meters).
1-7 Catalyst 3650 Switch Hardware Installation Guide OL-29734-01 Chapter 1 Product Overvie w Front Panel USB Mini-Type B Port The switch pro vides a USB mini-T ype B console connection on the front panel, an d the RJ-45 console port on the swi tch rear panel.
1-8 Catalyst 3650 Switch Hard ware I nstallation Guide OL-29734-01 Chapter 1 Produ ct Overvi ew Front Pan el Uplink Ports The switch supports four SFP module slots that provide uplink ports to c onnect to other de vices.
1-9 Catalyst 3650 Switch Hardware Installation Guide OL-29734-01 Chapter 1 Product Overvie w Front Panel Figure 1 -4 S witch Fr ont P a nel LEDs SYST LED 1 ST A T (status) 5 PoE 1 1. Only switches with PoE+ ports. The illustrations of the Catalyst 3 650 switch are not inte nded to depict any particular color sch eme.
1-10 Catalyst 3650 Switch Hard ware I nstallation Guide OL-29734-01 Chapter 1 Produ ct Overvi ew Front Pan el For information on th e SYST LED colors during POST , see the “Diagnosing Problems” section on page 5-1 . Port LEDs and Modes Each Ethernet port, 1-Gigabit Ethern et module slot, an d 10-Gigabit Ethern et module slot has a port LED.
1-11 Catalyst 3650 Switch Hardware Installation Guide OL-29734-01 Chapter 1 Product Overvie w Front Panel T able 1 -4 Meaning of S witch LED Colors in Diff erent Modes Port Mode Port LED Color Meaning ST A T (port status) Of f No link, or port was admin istrati vely shut do wn.
1-12 Catalyst 3650 Switch Hard ware I nstallation Guide OL-29734-01 Chapter 1 Produ ct Overvi ew Front Pan el USB Console LED The USB console LED ( Figure 1-4 ) shows whether there is an acti ve USB connectio n to the port. ACTV LED PoE+ 1 Of f PoE+ is off.
1-13 Catalyst 3650 Switch Hardware Installation Guide OL-29734-01 Chapter 1 Product Overvie w Front Panel STACK LED The ST ACK LED sho w s the sequence of member swit ches in a stack. Up to nine s witches can be members of a stack. The f irst nine port LEDs show the member n umber of a switch in a stack.
1-14 Catalyst 3650 Switch Hard ware I nstallation Guide OL-29734-01 Chapter 1 Produ ct Overvi ew Front Pan el Uplink Ports LEDs The four uplink ports ha ve four status LEDs. Each port LED is labeled according to its SFP and SFP+ module status. For SFP ports, a G(x) labeling nomenclature is used, where G = 1 Gigabit and x = the port number .
1-15 Catalyst 3650 Switch Hardware Installation Guide OL-29734-01 Chapter 1 Product Overvie w Rear Panel Figur e 1 -6 Uplink P orts LEDs Rear Panel The switch rear panel in cludes StackWise connectors, ports, f a n modules, and po wer supply modules. See Figure 1-7 .
1-16 Catalyst 3650 Switch Hard ware I nstallation Guide OL-29734-01 Chapter 1 Produ ct Overvi ew Rear Panel Figure 1 -7 Catalyst 3650 Switch Rear P anel RJ-45 Console Port LED StackWise Ports StackW ise ports are used to connect switches in Stac kW ise stacking c onfigurations.
1-17 Catalyst 3650 Switch Hardware Installation Guide OL-29734-01 Chapter 1 Product Overvie w Rear Panel For Catalyst 3650 switches where stacking is specif ied, StackW ise adapters are preinstalled in the StackW ise ports, and optional St ackW ise cables can be ordered.
1-18 Catalyst 3650 Switch Hard ware I nstallation Guide OL-29734-01 Chapter 1 Produ ct Overvi ew Rear Panel The po wer supply modules ha ve two status LEDs.
1-19 Catalyst 3650 Switch Hardware Installation Guide OL-29734-01 Chapter 1 Product Overvie w Rear Panel For in formation about replacing a power supply module, w iring a DC po wer supply module, and module specifications, see Chapter 3, “Power Supply Installati on, ” and Appendix A, “T echnical Specifications.
1-20 Catalyst 3650 Switch Hard ware I nstallation Guide OL-29734-01 Chapter 1 Produ ct Overvi ew Management Options Management Ports Ethernet Management Port Y ou can connect the switch to a host such as a Wi ndo ws workstation or a terminal serv er through the 10/100/1000 Ethernet management port or one of the cons ole ports (see Figure 1-7 ).
1-21 Catalyst 3650 Switch Hardware Installation Guide OL-29734-01 Chapter 1 Product Overvie w Management Options For info rmation on starting the Netw ork Assistant applicat ion, see the Getting Starte d with Cisco Network Assistant guide on Cisco.com.
1-22 Catalyst 3650 Switch Hard ware I nstallation Guide OL-29734-01 Chapter 1 Produ ct Overvi ew Management Options.
CH A P T E R 2-1 Catalyst 3650 Switch Hardware Installation Guide OL-29734-01 2 Switch Installation This chapter describes h ow to install and connect a Catalyst 3650 switch. It also in cludes planning and cabling considerations for stacki ng switches.
2-2 Catalyst 3650 Switch Hard ware I nstallation Guide OL-29734-01 Chapter 2 Switch Installatio n Preparing for Installation War ni n g Ethernet cables must be shielded when used in a central office enviro nment. Statement 171 War ni n g V oice over IP (VoIP) service and the emergency calling service do not functio n if power fails or is disrupted.
2-3 Catalyst 3650 Switch Hardware Installation Guide OL-29734-01 Chapter 2 Switch Installation Preparing for Installation War ni n g T o prevent the system from overheating , do not operate it in an area that exceeds the maximum recommended ambient temperature of: 113°F (45°C) Statement 1047 War ni n g No user -serviceable parts inside.
2-4 Catalyst 3650 Switch Hard ware I nstallation Guide OL-29734-01 Chapter 2 Switch Installatio n Planning a Switch Data Stack • Operating en vironment is within the ranges listed i n Appendix A, “T echnical Specifications. ” • Airflo w around the switch and through the v ents is unrestricted.
2-5 Catalyst 3650 Switch Hardware Installation Guide OL-29734-01 Chapter 2 Switch Installation Planning a Switch Data Stack Switch Stacking Guidelines For general concep ts and managem ent procedu res for switch stacks, se e the switch s oftware confi guration guide on Cisco.
2-6 Catalyst 3650 Switch Hard ware I nstallation Guide OL-29734-01 Chapter 2 Switch Installatio n Planning a Switch Data Stack The configuration e xample ( Figure 2-1 ) uses the supplied 0.5-meter StackW ise cable. The example sho ws the full-ring co nf iguration that pro vides redundant connections.
2-7 Catalyst 3650 Switch Hardware Installation Guide OL-29734-01 Chapter 2 Switch Installation Planning a Switch Data Stack Figure 2-4 sho ws an example of a stack of Catalyst 3650 switches w ith incomplete StackW ise cabling connections. This stack pro vides only half bandwidth and do es not ha ve redund ant connections.
2-8 Catalyst 3650 Switch Hard ware I nstallation Guide OL-29734-01 Chapter 2 Switch Installatio n Planning a Switch Data Stack • If two operating partial ring stacks are connecte d together using a stack cabl e, a stack mer ge can occur . This si tuation re lo ads the whole stack (all switches in the st ack).
2-9 Catalyst 3650 Switch Hardware Installation Guide OL-29734-01 Chapter 2 Switch Installation Installing the Switch Note Make sure that you p ow er of f the switches that you ad d to or remo ve from th e switch stack. After adding or remo ving stack members, make sure th at the switch stack is operating at full bandwidth.
2-10 Catalyst 3650 Switch Hard ware I nstallation Guide OL-29734-01 Chapter 2 Switch Installatio n Installing the Switch Rack-Mounting T o install the switch in a 19-inch rack, follo w the instructions described in this secti on. The 19-inch brackets are incl uded with th e switch.
2-11 Catalyst 3650 Switch Hardware Installation Guide OL-29734-01 Chapter 2 Switch Installation Installing the Switch Figur e 2-7 Rack-Mounting Brac kets Attaching the Rack -Mount Brackets T o install.
2-12 Catalyst 3650 Switch Hard ware I nstallation Guide OL-29734-01 Chapter 2 Switch Installatio n Installing the Switch Figur e 2-8 Attaching Br ack e ts for 1 9-inch Racks 1 Rear- mounting position .
2-13 Catalyst 3650 Switch Hardware Installation Guide OL-29734-01 Chapter 2 Switch Installation Installing the Switch Mounting the Switch in a Rack After the brackets are attached to the switc h, use the supp lied Phil lips machine screws to attach the brackets to the rack ( Figure 2-10 ).
2-14 Catalyst 3650 Switch Hard ware I nstallation Guide OL-29734-01 Chapter 2 Switch Installatio n Installing the Switch Table- or Shelf-Mounting T o install the switch on a table or shelf, locate the adhesi ve strip with the rub ber feet in the mounting-kit en velope.
2-15 Catalyst 3650 Switch Hardware Installation Guide OL-29734-01 Chapter 2 Switch Installation Connecting to the Stack Wise Ports Connecting to the StackWise Ports Before connecting the StackWise cables, re view the “Planning a Switch Data Stack” section on page 2-4 .
2-16 Catalyst 3650 Switch Hard ware I nstallation Guide OL-29734-01 Chapter 2 Switch Installatio n Connecting to the StackW ise Ports Figure 2-1 1 Remo ving the StackWise Adapt er Blank from a StackWi.
2-17 Catalyst 3650 Switch Hardware Installation Guide OL-29734-01 Chapter 2 Switch Installation Installing and Re moving SFP and SFP+ Modu les Figure 2-13 Connecting the StackWise Cable to the Stac kWise Adapt er When you need to remov e the St ackW ise cable from the connector , make sure to fully unscre w the correct screws.
2-18 Catalyst 3650 Switch Hard ware I nstallation Guide OL-29734-01 Chapter 2 Switch Installatio n Installing and Removing SFP and SFP+ Modules War ni n g Class 1 laser product. Statement 1008 • Do not remov e the dust plugs from the SFP modu les or the rubber caps fro m the fiber -optic cable until you are ready to conn ect the cable.
2-19 Catalyst 3650 Switch Hardware Installation Guide OL-29734-01 Chapter 2 Switch Installation Connecting De vices to the Ethernet Ports Figur e 2-15 Connecting an SFP Cable to an SF P Module Installe d in an Uplin k P o rt Removing SFP or SFP+ Modules Step 1 Attach an ESD-pre venti ve wrist strap t o your wrist and to an ear th ground surf ace.
2-20 Catalyst 3650 Switch Hard ware I nstallation Guide OL-29734-01 Chapter 2 Switch Installatio n Connecting Devices to the Eth ernet Ports The autone gotiation feature is enabled b y default on the swi t ch. At this setting, the switch ports configure themselv es to op erate at the speed of attached device.
2-21 Catalyst 3650 Switch Hardware Installation Guide OL-29734-01 Chapter 2 Switch Installation Connecting De vices to the Ethernet Ports PoE+ Port Connections The 10/100/1000 PoE+ p o rts ha ve the s.
2-22 Catalyst 3650 Switch Hard ware I nstallation Guide OL-29734-01 Chapter 2 Switch Installatio n Where to Go Ne xt War ni n g V oltages that present a shock hazard ma y exist on Power over Ethernet (PoE) circuits if interconnections are m ade using uninsulated exposed metal contact s, conductors, or terminals.
CH A P T E R 3-1 Catalyst 3650 Switch Hardware Installation Guide OL-29734-01 3 Power Supply Installation This chapter describes ho w to install the po wer supply modules.
3-2 Catalyst 3650 Switch Hard ware I nstallation Guide OL-29734-01 Chapter 3 Powe r Supply Installation Power Supply Module Overview For information on a vailabl e PoE, see these sections: • T able .
3-3 Catalyst 3650 Switch Hardware Installation Guide OL-29734-01 Chapter 3 Power Supply Installation Power Supply Modu le Overview Figure 3-2 640-W AC P ower Supply Module Figur e 3-3 250 -W AC P ow e.
3-4 Catalyst 3650 Switch Hard ware I nstallation Guide OL-29734-01 Chapter 3 Powe r Supply Installation Power Supply Module Overview Figur e 3-4 640 -W DC P ower Supply Module If no po wer supply is installed in a po wer supply slot, instal l a po wer supply slot blank co ver ( Figure 3-5 ).
3-5 Catalyst 3650 Switch Hardware Installation Guide OL-29734-01 Chapter 3 Power Supply Installation Installation Guidelines Installation Guidelines Ta b l e 3 - 1 lists the switches an d the compatible po wer-supply mo dules.
3-6 Catalyst 3650 Switch Hard ware I nstallation Guide OL-29734-01 Chapter 3 Powe r Supply Installation Installing or Replacin g an AC Power Supply War ni n g Blank faceplates and c over panels serve .
3-7 Catalyst 3650 Switch Hardware Installation Guide OL-29734-01 Chapter 3 Power Supply Installation Installing a DC Power Supply Figure 3-6 Inserting the AC-P ow er Supply in the Switc h Step 6 (Optional) Make a loo p in the po wer cord and thread it through the po wer cord retainer ( Figure 3-7 ).
3-8 Catalyst 3650 Switch Hard ware I nstallation Guide OL-29734-01 Chapter 3 Powe r Supply Installation Installing a DC Power Supply War ni n g Before performing any of the fo llowing procedures, en sure that power is removed from t he DC circuit.
3-9 Catalyst 3650 Switch Hardware Installation Guide OL-29734-01 Chapter 3 Power Supply Installation Installing a DC Power Supply War ni n g When installing or replacing th e unit, the ground conn ection must always be m ade first and disconnected last.
3-10 Catalyst 3650 Switch Hard ware I nstallation Guide OL-29734-01 Chapter 3 Powe r Supply Installation Installing a DC Power Supply Figure 3-1 0 Attac hing the Ground Lug and Wire Assembly 1 Single-.
3-11 Catalyst 3650 Switch Hardware Installation Guide OL-29734-01 Chapter 3 Power Supply Installation Installing a DC Power Supply Installing the DC Power Supply in the Switch Before installing the po wer supply , see the Installation G uidelines, page 3-5 .
3-12 Catalyst 3650 Switch Hard ware I nstallation Guide OL-29734-01 Chapter 3 Powe r Supply Installation Finding the Power Su pply Module Serial Numb er Figur e 3-12 DC Source A Isolated F rom Sour ce B with No Common Grou nd Figure 3-13 DC Source A and Source B Connections with Common Ground Step 4 T orque all terminal block scre ws to 11 lbf-in.
3-13 Catalyst 3650 Switch Hardware Installation Guide OL-29734-01 Chapter 3 Power Supply Installation Finding the Power Supply Modu le Serial Number Figur e 3-14 1 025-W AC P ower Supply Ser ial Numbe.
3-14 Catalyst 3650 Switch Hard ware I nstallation Guide OL-29734-01 Chapter 3 Powe r Supply Installation Finding the Power Su pply Module Serial Numb er Figure 3-16 640-W DC Po wer Supp ly Module Seri.
CH A P T E R 4-1 Catalyst 3650 Switch Hardware Installation Guide OL-29734-01 4 Installing the Fan This chapter describes ho w to install a fan module. • Overvie w , page 4-1 • Fan Mo dule Installation, page 4-2 • Finding the F an Module Serial Number , page 4-4 Overview The switch has th ree fan modules.
4-2 Catalyst 3650 Switch Hard ware I nstallation Guide OL-29734-01 Chapter 4 Installing the Fa n Fan Module Installation Figur e 4-1 Fan Module Fan Module Installation Installation Guidelines War ni n g Only trained and qualified personnel sh ould be allowed to install, replace, or service this equi pment.
4-3 Catalyst 3650 Switch Hardware Installation Guide OL-29734-01 Chapter 4 Installing the Fan Fan Module Installation Installing a Fan Module Step 1 Pinch the fa n module release ha ndle, and slide t he module out. Caution Y ou should replace the f an module within 5 minu tes to av oid ove rheating the switch.
4-4 Catalyst 3650 Switch Hard ware I nstallation Guide OL-29734-01 Chapter 4 Installing the Fa n Finding the Fan Module Serial Number Finding the Fan Module Serial Number If you contact Cisco T echnical Assistance regardi ng a fan modul e, you need to kno w the fan module serial number .
CH A P T E R 5-1 Catalyst 3650 Switch Hardware Installation Guide OL-29734-01 5 Troubleshooting • Diagnosing Problems, page 5- 1 • Resetting the Switch, page 5-5 • Finding the Switch Serial Numb.
5-2 Catalyst 3650 Switch Hard ware I nstallation Guide OL-29734-01 Chapter 5 Troubleshooting Diagnosing Prob lems Switch Connections Bad or Damaged Cable Always e xamine the cable for marginal damage or fa ilure.
5-3 Catalyst 3650 Switch Hardware Installation Guide OL-29734-01 Chapter 5 Troubleshooting Diagnosing Problems 10/100/1000 Port Connections A port appears to malfun ction: • V erify the stat us of all ports. See T able 1-3 on page 1- 10 for descriptions of the LEDs and their meanings.
5-4 Catalyst 3650 Switch Hard ware I nstallation Guide OL-29734-01 Chapter 5 Troubleshooting Diagnosing Prob lems • For long w av e SFP+ modules, a mode conditioning patch might improv e performance ov er maximum link distan ces with MMF connecti ons.
5-5 Catalyst 3650 Switch Hardware Installation Guide OL-29734-01 Chapter 5 Troubleshooting Resetting the Switch Autonegotiation and Ne twork Interface Cards Problems sometimes occur between the switch and thi rd-party networ k interface cards (NICs). By default, th e switch ports and interf aces autonegotiate.
5-6 Catalyst 3650 Switch Hard ware I nstallation Guide OL-29734-01 Chapter 5 Troubleshooting Finding the Swit ch Serial Numbe r Finding the Switch Serial Number If you contact Cisco T echnical Assistance, yo u need to know the sw itch serial number . Figure 5-1 shows the serial number location.
A-1 Catalyst 3650 Switch Hardwa re Installation Guide OL-29734-01 APPENDIX A Technical Specifications • Switch Specifications, page A-1 • Po wer Supply Module Specif ications, page A-3 • Fan Mod.
A-2 Catalyst 3650 Switch Hard ware I nstallation Guide OL-29734-01 Appendix A Technical Specific ations Switch Specifications Operating temperatu re ranges an d altitude (DC po wer supply installed) N.
A-3 Catalyst 3650 Switch Hardware Installation Guide OL-29734-01 Appendix A T echnical Specifications Power Supply Modu le Specifications Power Supply Module Specifications T able A -2 Envir onmental .
A-4 Catalyst 3650 Switch Hard ware I nstallation Guide OL-29734-01 Appendix A Technical Specific ations Power Supply Module Specifications T ota l input BT U 1 PWR-C2-1025W A C: 3801 BTUs per hour , 1.
A-5 Catalyst 3650 Switch Hardware Installation Guide OL-29734-01 Appendix A T echnical Specifications Fan Modul e Sp ecifications Fan Module Specifications T able A -5 F an Module En vironmenta l and .
A-6 Catalyst 3650 Switch Hard ware I nstallation Guide OL-29734-01 Appendix A Technical Specific ations Fan Module Specifications.
B-1 Catalyst 3650 Switch Hardwa re Installation Guide OL-29734-01 APPENDIX B Connector and Cab le Specifications This chapte r describes the connector a nd cable specif ications.
B-2 Catalyst 3650 Switch Hard ware I nstallation Guide OL-29734-01 Appendix B Connec tor and Cable Sp ecifications Connector Specifications 10-Gigabit Ethernet CX1 (SFP+ Copper) Connectors The 10-Gigabit Ethernet electrical modul es use CX1 copper connectors similar to th e one sho wn in Figure B-2 .
B-3 Catalyst 3650 Switch Hardware Installation Guide OL-29734-01 Appendix B Connect or and Cable Specifications Connector Specifications Figure B-4 Simplex LC Cable Connector Figure B-5 Copper SFP Mod.
B-4 Catalyst 3650 Switch Hard ware I nstallation Guide OL-29734-01 Appendix B Connec tor and Cable Sp ecifications Connector Specifications Figure B-7 1 0/1 0 0 P ort Pinouts Console Port The switch has t wo console ports: a U SB 5-pin mini-T ype B port on t he front panel (se e Figure B-8 ) and an RJ-45 console port on the rear panel.
B-5 Catalyst 3650 Switch Hardware Installation Guide OL-29734-01 Appendix B Connect or and Cable Specifications Cable and Adapter Specification s terminal. Y ou can order a kit (part number A CS-DSBU ASYN=) containin g that adapter . For consol e port and adapter pino ut information, see Ta b l e B - 2 and Ta b l e B - 3 .
B-6 Catalyst 3650 Switch Hard ware I nstallation Guide OL-29734-01 Appendix B Connec tor and Cable Sp ecifications Cable and Adapter Spec ifications StackWise Cables Minimum Bend Radius and Coiled Diameter Ta b l e B - 1 sp ecifies the minimu m bend radiu s and coiled diameter for each StackWise cable.
B-7 Catalyst 3650 Switch Hardware Installation Guide OL-29734-01 Appendix B Connect or and Cable Specifications Cable and Adapter Specification s StackWise Adapter Blanks A StackW ise adapter blank is installed in the stacki ng port if stack ing is not specif ied at the time of ordering the switch.
B-8 Catalyst 3650 Switch Hard ware I nstallation Guide OL-29734-01 Appendix B Connec tor and Cable Sp ecifications Cable and Adapter Spec ifications Four Twisted-Pair Cable Pinouts Figur e B-13 F our .
B-9 Catalyst 3650 Switch Hardware Installation Guide OL-29734-01 Appendix B Connect or and Cable Specifications Cable and Adapter Specification s Figur e B-16 T wo T wisted-P air Crossov er Cable Schematic Identifying a Crossover Cable T o identify a crosso ver cable, hold the cable ends side-by-side, with the tab at the b ack.
B-10 Catalyst 3650 Switch Hard ware I nstallation Guide OL-29734-01 Appendix B Connec tor and Cable Sp ecifications Cable and Adapter Spec ifications Ta b l e B - 3 lists the pinouts for the console port, RJ-45-to -DB-25 female DTE adapter , and the console d evice.
C-1 Catalyst 3650 Switch Hardwa re Installation Guide OL-29734-01 APPENDIX C Configuring the Switch with the CLI-Based Setup Program This appendix pro vides a CLI-based setup procedure for a Cataly st 3650 stan dalone switch or a swit ch stack. T o set up the switc h by using Express Setup, see the Catalyst 3650 Switc h Getting Started Guide .
C-2 Catalyst 3650 Switch Hard ware I nstallation Guide OL-29734-01 Appendix C Con figuring the Switch with th e CLI-Based Setup Progr am Accessing the CLI Note If you ha ve stack ed Catalyst 3650 sw itches, connec t to the 10/100/100 0 Ethernet management port or console port of one of the stack sw itches.
C-3 Catalyst 3650 Switch Hardware Installation Guide OL-29734-01 Appendix C Configuring the Switch with the CLI-Based Setup Program Accessing the CLI Figure C-1 Connecting the USB Console Cable t o the Catalyst 3650 Switch Step 2 Connect a US B cable to the PC US B po rt.
C-4 Catalyst 3650 Switch Hard ware I nstallation Guide OL-29734-01 Appendix C Con figuring the Switch with th e CLI-Based Setup Progr am Accessing the CLI Step 1 Obtain the Cisco USB console dri ver file from the Cisco.com web site and unzip it. Note Y ou can download the driv er file from the Cisc o.
C-5 Catalyst 3650 Switch Hardware Installation Guide OL-29734-01 Appendix C Configuring the Switch with the CLI-Based Setup Program Entering the Initial Configuration Information Uninstalling the Cisco Microsoft Windows USB Driver Using th e Setup.exe Program Note Disconnect the switch console termin al before uninstalling the driv er .
C-6 Catalyst 3650 Switch Hard ware I nstallation Guide OL-29734-01 Appendix C Con figuring the Switch with th e CLI-Based Setup Progr am Entering the Initial Con figuration Information At any point you may enter a question mark '?' for help.
C-7 Catalyst 3650 Switch Hardware Installation Guide OL-29734-01 Appendix C Configuring the Switch with the CLI-Based Setup Program Entering the Initial Configuration Information Y ou hav e completed the initial conf iguration of the switch, and the swit ch displays its co nfigu ration.
C-8 Catalyst 3650 Switch Hard ware I nstallation Guide OL-29734-01 Appendix C Con figuring the Switch with th e CLI-Based Setup Progr am Entering the Initial Con figuration Information.
Een belangrijk punt na aankoop van elk apparaat Cisco Systems 3650 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Cisco Systems 3650 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Cisco Systems 3650 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Cisco Systems 3650 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Cisco Systems 3650 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Cisco Systems 3650 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Cisco Systems 3650 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Cisco Systems 3650 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
