Gebruiksaanwijzing /service van het product 4400G van de fabrikant Cisco Systems
Ga naar pagina of 28
Q UICK S TART Quick Start Guide for Cisco Digital Me dia Player 4400G 1 Chec king the P ac k age Contents 2 Finding a Suitable Location to S et Up Y our DMP 3 P articipating in a DHCP Ne twork 4 Conne.
2 Revised: July 9, 2008 78-18567-02 Contains Macromedia® Flash™ technology by Adobe Systems , Inc. Copyright 1995-2003 Adobe Systems, Inc. All Rights reserved. Macromed ia, Flash, Macromedia Flash, and Macromedia Flash Lite are trademarks or registere d trademarks of Adobe Systems, Inc.
3 Glossary Cisco Digital Media System (Cisco DMS) is a family of products and technologies, including the ones tha t this guide describes. A Digital Media Pla yer (DMP) is a compact, solid state, addr.
4 Learn More T o learn more about DMS products, related technologies, and Cisco in general: Description Go T o DMS overview http://www.cisco.com/go/dms Release notes for Cisco DMS products http://www.cisco.com/en/US/products/ ps6681/prod_release_notes_list.
5 1 Checking the Package Contents The product package for one DMP 4400G should contain all of the following: • A proof of purchase certificate that contains important legal information, which you should keep. • This quick start guide and other product documentation.
6 2 Finding a Suitable Location to Set Up Your DMP The site where you set up a DM P must be within 6 feet of an AC electrical outlet (socket), with voltage that is standard in your locale, between 100V and 240V . T o understand the supported lengths for different vide o cable types, see the “Connecting to a DMP Display” section on page 8 .
7 3 Participating in a DHCP Network The factory default for a DMP 4400G is to obtain its IP a ddress automatically from a DHCP server . If you will deploy your DMP at a physical location that does not have a DHCP server , see User Guide for Cisco Digital Media Pl ayer Device Manager 5.
8 Step 1 Plug one end of an ordinary Ethernet cable into the Ethernet 10/100 port on the back of the DMP chas sis. Step 2 Plug the other end of the Ethernet cable into a network hub, network switch, or router that participates in a DHCP network. 4 Connecting to a DMP Display W e recommend that you use a digital display , not a nalog.
9 Y ou can use displa ys from any manuf acturer , as long as your displays comply wi th all of the relev ant international standards. If NEC is your pref erred manufacturer for LCD di splays, we recom.
10 T o attach an analog display to your DMP , we recommend that you use the provided composite/RCA cable for both video and audio. Step 1 On the back of your DMP cha ssis, do one of the following: •.
11 • If you will connect your DMP to an analog display , do all of the following: – Plug one yellow jack on the RCA video cable into the CVBS interface on your DMP . – Plug the 3mm jack on the RCA audio cable into the AUDIO interface on your DMP .
12 Step 3 Connect to an AC electrical outlet that y ou know is grounded, and that uses the correct voltage level for your locale. Supported levels range from 100V to 240V . T o protect your DM P from elec trical surges, we recommend that you use a surge protector or an uninterruptible power supply from a reputable ma nufacturer .
13 7 Logging in to DMPDM and Changing its Passwords Step 1 When your DMP display shows the Cisco l ogo and shows an IP address for your DMP , write down the IP address.
14 Ti p T o reconfigure this splash screen in the future to pers ist for less than or more than the factory-default duration of 30 seconds, select Settings > Browser , enter a new duration in milliseconds in the Splash Screen Display T ime (in milliseconds) field, then click Apply .
15 If you have very few DMPs an d will manage each of them in isolation, you can change their DMP W eb Acco unt and DMP Service Account passwords manually in DMPDM. Y ou use the W eb Service Account when you log in to DMPDM itself, and the DMP Service Account is a user account with F TP login privileges.
16 string should contain an actual plus sign, you must encode the plus sign explicitly as %2B . Exclamat ion points ( ! ), question marks ( ? ), ampersands ( & ), and asterisks ( * ) are forbidden in values. T o understand URI encodi ng and its recommended syntax for submitting query strings, see RFC 1630 at http://tools.
17 c. In the Request text box, use the correct syntax for URI encoding and enter mibifc.user=admin&mibifc.password= new_passwor d &mib.save=1 , where new_password is exactly the password that you want to assign to the DMP W eb Account user . d.
18 Note If you just completed the optiona l Step 4 in this procedure, that means you skipped ahead first and have already completed the “Setting Up Centralized Management” section on page 22.
19 If you prefer , you can use DMM-DSM to change the password simultaneously on multiple DMPs in your digital signage network: a. Select Digital Media Players > Advanced T asks > System T asks , then click the blank page icon to create a new system task.
20 – Select the check box for e ach DMP where the DMP Service Account password should change. – Select from the Select an Ev ent T ype list the system task that you named in Step 5b. ( Alternatively , users of DMM-DSM 4.1. x should select this task from the Actions list.
21 Otherwise, if you are not satisfied, do the following: a. From the DMP Display Autodetection (requires HDMI) list, select Disable . b. From the Display Standard list, select the standard that applies in your country . For example, even though our factory default selection is NTSC_M, your country might use PA L instead.
22 Step 5 T o confirm your selections and to implement them until you change them or unti l you restart your DMP , click Apply . Step 6 T o test if your selectio ns are suitable ones for your DMP display , click Show IP in the DMP Mode area. Y our DMP display should show a Cisco logo an d should show the IP address for your DMP .
23 Caution T o stop untrusted DMM appliances from being able to seize control of your DMPs, you must configure your network firewall to restrict which devices you will permit to send inbound traffic to your DMP over TCP port 7777. If you do not know how to work with access control lists, see the manufacturer documentation for your firewall.
24 d. T o confirm your selections and to implement them until you change them or until you restart your DMP , click Apply . e. T o make these configuration changes persist even after you restart your DMP , do the following: – Select Administration > Save Config uration .
25 Step 3 Specify in DMM-DSM th e correct user credentials for your centrally managed DMPs. a. Select Settings > Server Settings . b. Enter the required values: – Servlet Server Address — If you have not already done so, enter the DNS-resolvable hostname and domain for the appliance that is serving DMM-DSM, like dmm.
26 to communicate with your DMPs and, when communication fails, will consider your DMPs to be unreachable and unmanageable. 10 Learning About the Remote Control for DMPs The remote control features require that your DMPs use firmware release 5.0 or later and that your DMM a ppliances use DMM software release 5.
27 11 Product Documentation, Support, and Security For information on obtaining documentation, obtaining support, providing documentation feedback, security guidelines, and also recommended aliases an.
Americas Headquarters Cisco S ystems, Inc. San Jose, CA Asia Pacific Headquarters Cisco Systems (USA) Pte. Ltd. Singapore Europe Headquarte rs Cisco Syste ms International BV Amsterdam, The Netherlands Cisco has mo re than 200 offices worldw ide. Addresses, phone nu mbers, and fax numbers are listed on th e Cisco W ebsite at www .
Een belangrijk punt na aankoop van elk apparaat Cisco Systems 4400G (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Cisco Systems 4400G heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Cisco Systems 4400G vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Cisco Systems 4400G leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Cisco Systems 4400G krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Cisco Systems 4400G bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Cisco Systems 4400G kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Cisco Systems 4400G . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
