Gebruiksaanwijzing /service van het product 6100 van de fabrikant Cisco Systems
Ga naar pagina of 26
CHAPTER Cisco 6100 Series User Guide 3-1 3 Cisco 6100 Ser ies System Cab les This chapter provides Netw ork Equipment Building Systems (NEBS) compliance cabling guidelines, cabling configuration diag.
3 Cisco 6100 Series System Cables 78-6643-01 09/27/99 Cisco 6100 Series User Guide 3-2 T able 3-1 shows an ov erview of the cables used for each Cisco 6100 Series system configuration.
78-6643-01 09/27/99 Cisco 6100 Series System Cables 3 Cisco 6100 Series User Guide 3-3 3.1 NEBS Compliance Cabling Guidelines T o comply with NEBS requirements, ensure that all cables are scre wed in to the backplane and that the Champ connectors are tie wrapped.
3 Cisco 6100 Series System Cables 78-6643-01 09/27/99 Cisco 6100 Series User Guide 3-4 3.2.1 MC to PSC Cab les Y ou can use the following cables when you are cabling the MC to the PSC in a Direct Connect with a PSC configuration: • One-to-one cables—Used to connect the MC to the PSC for systems using dual-port CAP or DMT -2 A TU-C modules.
78-6643-01 09/27/99 Cisco 6100 Series System Cables 3 Cisco 6100 Series User Guide 3-5 Figure 3-2 shows the cabling between the MC and the PSC in which the cables listed in T able 3-2 are used.
3 Cisco 6100 Series System Cables 78-6643-01 09/27/99 Cisco 6100 Series User Guide 3-6 T w o-to-One Cab les Y ou can use two-to-one cables to connect one MC to two PSCs for systems using dual-port or quad-port A TU-C modules. Quad-port A TU-C modules will be av ailable in a future release.
78-6643-01 09/27/99 Cisco 6100 Series System Cables 3 Cisco 6100 Series User Guide 3-7 Figure 3-4 shows the cabling between one MC and tw o PSCs in which the cables listed in T able 3-3 are used.
3 Cisco 6100 Series System Cables 78-6643-01 09/27/99 Cisco 6100 Series User Guide 3-8 3.2.2 PSC to MDF Cab les Y ou can use the following cables to connect the PSC to the MDF in a Direct Connect with a PSC configuration: • One-to-one cables—Used to connect the PSC to the MDF .
78-6643-01 09/27/99 Cisco 6100 Series System Cables 3 Cisco 6100 Series User Guide 3-9 Figure 3-6 shows the cabling between the PSC to the MDF in which the cables listed in T able 3-4 are used.
3 Cisco 6100 Series System Cables 78-6643-01 09/27/99 Cisco 6100 Series User Guide 3-10 Note When you use the two-to-two cable, see T able C-3 on page C-8 for port mapping information.
78-6643-01 09/27/99 Cisco 6100 Series System Cables 3 Cisco 6100 Series User Guide 3-11 Figure 3-9 shows the cabling between the xDSL subscriber line connectors on the PSC and the MDF in which the cables listed in T able 3-5 are used.
3 Cisco 6100 Series System Cables 78-6643-01 09/27/99 Cisco 6100 Series User Guide 3-12 3.3.1 T wo-to-Three Cab les T o associate the MDF wire pairs and the MC modem ports, the two-to-three cable remaps the wire pairs from the MC connectors to the MDF connectors.
78-6643-01 09/27/99 Cisco 6100 Series System Cables 3 Cisco 6100 Series User Guide 3-13 Figure 3-12 shows the cabling between the MC and the MDF in which the cables listed in T able 3-6 are used. Figure 3-12 MC to MDF Cabling Diagram with T w o-to-Three Cables 3.
3 Cisco 6100 Series System Cables 78-6643-01 09/27/99 Cisco 6100 Series User Guide 3-14 Figure 3-13 shows the three-to-three cable. Figure 3-13 Three-to-Three Cable 23648 J40 J41 P5 Slots 7, 8, 21 to .
78-6643-01 09/27/99 Cisco 6100 Series System Cables 3 Cisco 6100 Series User Guide 3-15 Figure 3-14 shows the cabling between the MC and the MDF in which the cables listed in T able 3-7 are used. Figure 3-14 MC to MDF Cabling Diagram with Three-to-Three Cab les 3.
3 Cisco 6100 Series System Cables 78-6643-01 09/27/99 Cisco 6100 Series User Guide 3-16 Figure 3-15 shows the fi ve-to-six cable. Figure 3-15 Five-to-Six Cable Figure 3-16 shows the cabling between the MC and the MDF in which the cables listed in T able 3-8 are used.
78-6643-01 09/27/99 Cisco 6100 Series System Cables 3 Cisco 6100 Series User Guide 3-17 3.4 DOH Configuration Cables In a DOH configuration, use only designated cables to connect the MC, LCC, PSC, and MDF .
3 Cisco 6100 Series System Cables 78-6643-01 09/27/99 Cisco 6100 Series User Guide 3-18 Figure 3-17 shows the cabling connecting the DOH components in which the cables listed in T able 3-9 are used. Figure 3-17 Cabling Components f or a DOH Configuration 3.
78-6643-01 09/27/99 Cisco 6100 Series System Cables 3 Cisco 6100 Series User Guide 3-19 One-to-One Cables Y ou can use one-to-one cables to connect the PSC to the MDF or external v oice equipment.
3 Cisco 6100 Series System Cables 78-6643-01 09/27/99 Cisco 6100 Series User Guide 3-20 Figure 3-20 shows the cabling between the PSC and the e xternal voice equipment in which the cables listed in T able 3-10 are used.
78-6643-01 09/27/99 Cisco 6100 Series System Cables 3 Cisco 6100 Series User Guide 3-21 Figure 3-21 shows the tw o-to-two cable. Figure 3-21 T wo-to-T wo Cable Figure 3-22 shows the cabling between the xDSL subscriber line connectors on the PSC and the MDF in which the cables listed in T able 3-11 are used.
3 Cisco 6100 Series System Cables 78-6643-01 09/27/99 Cisco 6100 Series User Guide 3-22 Figure 3-23 shows the cabling between the v oice lines on the PSC and the voice switching equipment that provides local PO TS service. The cables listed in T able 3-11 are used for the connection.
78-6643-01 09/27/99 Cisco 6100 Series System Cables 3 Cisco 6100 Series User Guide 3-23 3.5.1 Cab ling Diagr ams T wo DS3 system I/O cards are currently av ailable. Figure 3-24 shows the basic cabling of the subtended network configuration with the DS3 system I/O card that is a v ailable from Release 2.
3 Cisco 6100 Series System Cables 78-6643-01 09/27/99 Cisco 6100 Series User Guide 3-24 Figure 3-25 shows the basic cabling of the subtended netw ork configuration with the DS3 system I/O card that is av ailable earlier than Release 2.4.0. Figure 3-25 Basic Cabling f or Subtending Before Release 2.
78-6643-01 09/27/99 Cisco 6100 Series System Cables 3 Cisco 6100 Series User Guide 3-25 3.6 Siecor PO TS Splitter Cables The Siecor ADSL PO TS Splitter Rack-Mount Shelf is compatible with the Cisco 6130. If you use the Siecor PO TS splitter, you need six one-to-one cables to connect the PO TS splitter to the Cisco MC connectors J39 through J44.
3 Cisco 6100 Series System Cables 78-6643-01 09/27/99 Cisco 6100 Series User Guide 3-26.
Een belangrijk punt na aankoop van elk apparaat Cisco Systems 6100 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Cisco Systems 6100 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Cisco Systems 6100 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Cisco Systems 6100 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Cisco Systems 6100 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Cisco Systems 6100 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Cisco Systems 6100 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Cisco Systems 6100 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
