Gebruiksaanwijzing /service van het product 78-15328-01 van de fabrikant Cisco Systems
Ga naar pagina of 1209
Corporate He adquarters Cisc o Syst ems , Inc . 170 West Ta sman Drive San Jos e, CA 95 134-1706 USA http://www.ci sco.com Tel: 408 526-4000 800 553- NETS (638 7) Fax: 408 526-4100 Catalyst 650 0 Series Sw itc h Command Reference R ele ase 7 .
THE SPECIFICATIONS AND INFORMATION REG ARDING THE PRODUCTS IN THIS MANUAL ARE SUBJECT TO CHANGE WITHOU T NOTICE. ALL STATEMENT S, INFORMATI ON, AND RECOMMENDA TIONS IN T HIS MANUAL ARE BELIEVED TO BE ACCURATE BUT ARE PRES ENTED WITHOUT WARRANTY OF ANY KIND, EXPRE SS OR IMPLIED.
iii Catalyst 6500 Series Switch Command Reference—Release 7.6 78-15328-01 CONTENTS Preface xx v Audienc e xxv Organi zation xx v Relat ed D ocum ent atio n xxv Conv enti ons xxvi Obtain ing Documentati on xxvii Cisco.
Cont ents iv Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 clea r bo o t sy st em 2-1 2 clea r ca m 2-13 clear ca m no ti fic a tion 2-14 clear channel st atistics 2-15 c.
Content s v Catalyst 6500 Series Switch Command Reference—Release 7.6 78-15328-01 clea r mls cef 2-52 clea r mls ent ry 2-53 clear ml s entry cef adjacency 2-5 5 clear ml s exclude protocol 2-56 cle.
Cont ents vi Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 clea r se c ur it y acl log fl o w 2-95 clea r se c ur it y acl m ap 2-96 clea r sn m p acc e ss 2-98 clear snm.
Content s vii Catalyst 6500 Series Switch Command Reference—Release 7.6 78-15328-01 clea r vm ps s tati stic s 2-137 clear v tp pruneeligi ble 2 -138 clea r vtp sta tisti cs 2-139 commit 2-140 commi.
Cont ents viii Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 set 2-194 set acco unting commands 2-195 set acco unting connect 2-196 set acco unting exec 2-197 set acco un.
Content s ix Catalyst 6500 Series Switch Command Reference—Release 7.6 78-15328-01 set de fa ult portstat us 2-251 set do t1 q-all-tagge d 2 -252 set do t1 x 2 -253 set en ab lepass 2-256 set err di.
Cont ents x Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 set ip ht tp port 2-297 set ip ht tp server 2-298 set ip per mit 2 -299 set ip re direct 2-30 1 set ip ro ute 2-.
Content s xi Catalyst 6500 Series Switch Command Reference—Release 7.6 78-15328-01 set mls fl ow 2 -343 set mls nd e 2-345 set mls ra te 2-349 set mls s tati sti cs pr otoc ol 2-350 set mls ve rify .
Cont ents xii Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 set p ort gmrp 2-398 set po rt g vrp 2-399 set po rt h ost 2-401 set po rt i nl inepo wer 2-402 set po rt j um.
Content s xiii Catalyst 6500 Series Switch Command Reference—Release 7.6 78-15328-01 set qo s ac l mac 2-457 set qo s ac l map 2-459 set qo s au toqos 2-461 set qos br idged-microf low-pol icing 2- .
Cont ents xiv Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 set se cur ity acl f eat ure ra teli mit 2-5 09 set s ecurity acl ip 2-510 set s ecurity acl ip x 2-516 set s .
Content s xv Catalyst 6500 Series Switch Command Reference—Release 7.6 78-15328-01 set sp an tree global-d efault 2-570 set s pan tree guard 2-572 set s pan tree hello 2-574 set sp ant ree link -typ.
Cont ents xvi Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 set syst em name 2-624 set syst em supervisor- update 2-625 set sy ste m sw itch mode all ow 2-627 set syst em.
Content s xvii Catalyst 6500 Series Switch Command Reference—Release 7.6 78-15328-01 show boot 2-672 show boot d evice 2-673 show cam 2-6 74 show cam agin gtim e 2-676 show cam coun t 2-677 show cam.
Cont ents xviii Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 show gvrp statist ics 2-740 show ifi ndex 2 -742 show igmp fl ooding 2-743 show igmp l eave-que ry-type 2-74.
Content s xix Catalyst 6500 Series Switch Command Reference—Release 7.6 78-15328-01 show mls exc l ude prot ocol 2-806 show mls m ult icast 2-8 07 show mls nde 2-812 show mls net flow-route 2-813 sh.
Cont ents xx Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 show port flowcontr ol 2-884 show port inlinep ower 2-886 show port jumbo 2-887 show port l2proto col-tunnel 2-.
Content s xxi Catalyst 6500 Series Switch Command Reference—Release 7.6 78-15328-01 show qos mac- cos 2-949 show qos maps 2-951 show qos pol icer 2-954 show qos pol icy-source 2-95 6 show qos rs vp .
Cont ents xxii Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 show snmp ta rget param s 2 -1006 show snmp use r 2-1008 show snmp vi ew 2-1010 show span 2-1012 show spant r.
Content s xxiii Catalyst 6500 Series Switch Command Reference—Release 7.6 78-15328-01 show top re port 2-1078 show traf fic 2-1080 show trun k 2-108 1 show udl d 2-1084 show user s 2-1086 show ver s.
Cont ents xxiv Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 APPENDI X A Acronyms A-1 I NDEX.
xxv Catalyst 6500 Series Switch Command Reference—Release 7.6 78-15328-01 Preface This pr efa ce d escri b es t he a udie nce, o rganizatio n, an d co nv en tion s o f thi s pu blica ti on an d p rovid es information on how to obtain relate d documentation.
xxvi Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Preface Conv entions • System Message Guid e—Catal yst 6500 Series , Catalyst 4000 F amily , Catalyst 2948G , and C.
xxvii Catalyst 6500 Series Switch Command Reference—Release 7.6 78-15328-01 Pre face Obtaining Docume ntation Notes us e the follo wing con ventio ns: Note Means r eader tak e note . Notes contain helpf ul suggestions or referen ces to material not co vered in the publica tion.
xxvii i Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Preface Obtain in g Technical Assis ta nce • Nonregiste red Ci sco. co m u ser s can o rd er doc um en tati on th rou gh a l oca l ac count rep re sen tative by calling Ci sco System s Corporate He adquar ters (Cal ifornia , U.
xxix Catalyst 6500 Series Switch Command Reference—Release 7.6 78-15328-01 Pre face Ob taining Technical Assistance Technica l Assista nce Ce nter The Cisco T AC is a vai lable to a ll customers wh o need tec hnical assista nce with a Cisco product, technol ogy , or solut ion.
xxx Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Preface Obtainin g Addi ti ona l Publicat io ns and Info rmatio n Obtaining Ad ditional Public ations and In formation Informa tion ab out Cisco pro ducts, tec hn ologie s, and net wor k solutions is available from various onlin e and printe d source s.
C HA PTER 1-1 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 1 Command-Line Interface s This chapt er desc ribes the c ommand- line inte rfaces (CL I) av ailab le on the Cata.
1-2 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapte r 1 Command-Li ne Int erface s Switch CLI Note EI A/TIA- 232 was known as RS-232 before its accepta nce as a standa rd by the Electron ic Indust ries Alliance and T elecommunic ations Indus try Associat ion.
1-3 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 1 Command-L in e In terfaces Switch CLI After con ne cting thr ough a T elne t se ssion, yo u see th is di spla y: host% telnet cat6000-1.cisco.com Trying 172.16.44.30 .
1-4 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapte r 1 Command-Li ne Int erface s Switch CLI Using the Command-Line Editing Features Catalyst 650 0 seri es swit ch s oft ware i ncl udes an enha nce d e diti ng mode tha t p rovides a set of e dit ing ke y f u nc tions simil ar to th ose of the Emac s ed ito r .
1-5 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 1 Command-L in e In terfaces Switch CLI In the follo wing e xample, when you enter the letter s conf and press the .
1-6 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapte r 1 Command-Li ne Int erface s Switch CLI Deleti ng Entrie s Perform on e of thes e tasks to delete command e ntr.
1-7 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 1 Command-L in e In terfaces Switch CLI Redisplayi ng the Current Command Line If you ente r a comma nd and the syst em suddenl y sends a message to your scre en, you can recall you r curr ent co mman d line en tr y .
1-8 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapte r 1 Command-Li ne Int erface s Switch CLI Using Command Aliases Like regular com mands , alia ses are no t case se nsitive. Ho we ver , unlike regular command s, some aliases cannot be abbreviat ed.
1-9 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 1 Command-L in e In terfaces Switch CLI Accessing Command He lp T o see a list of top-le vel comma nds and comm and cate gori es, type help i n norma l or pri vileg ed mo de.
1-10 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapte r 1 Command-Li ne Int erface s Switch CLI session Tunnel to ATM or Router module set Set commands, use 'set.
1-11 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 1 Command-L in e In terfaces Switch CLI Y ou can designat e ports by entering th e modu le and por t numbe r pairs, separat ed by commas . T o spe cify a rang e of po rts, use a d as h ( -) bet wee n the mo dule n umb er and po rt n umb er p airs .
1-12 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapte r 1 Command-Li ne Int erface s Switch CLI Using Command Self-Repeat Use the com mand self -r epea t functi on to display matches to all possible keywords if a st ri ng repres ents a unique match.
1-13 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 1 Command-L in e In terfaces ROM Moni tor CLI ROM Monitor CLI The ROM monitor is a R OM-ba sed prog ram that executes up on platform startup , reset, or when a fatal exception oc curs.
1-14 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapte r 1 Command-Li ne Int erface s ROM Moni to r CLI.
C HA PTER 2-1 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 2 Catalyst 6500 Series Switch and ROM Monitor Commands This chap ter co ntain s an alpha betica l listin g of all switc h and R OM monitor comman ds a v ail abl e on the Catalyst 6500 series switches.
2-2 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 Cataly st 6500 Series Switch and R OM Monitor Commands alias alias T o set and display command aliase s, use the alias command. alias [ name = value ] Syntax D escr i pti on Defaults Thi s command has no de fa ult set tings.
2-3 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s alias k=stack s=set rommon 4 > s PS1=rommon ! >.
2-4 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands boot boot T o b oot up an ext erna l proc es s, use t he boot co mman d. boot [ -x ] [ -v ] [ device : ][ imagename ] Syntax D escr i pti on Defaults Thi s command has no de fa ult set tings.
Chapter 2 Catalyst 6 500 Series Swi tch and ROM M onitor Commands cd 2-5 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 22 cd T o s et the default Fla sh device for the sy stem , use t he cd comm and. cd [[ m/ ] de vice : ] Syntax Descript ion Defaults The de fault Flash device is bootfl ash.
2-6 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands clear acl lo g clear acllog T o disable A CL log rate limiting, use the cl ear ac llog command. clear ac llog Syntax D escr i pti on This comm and ha s no a rgume nts o r keywords.
2-7 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clea r al i as clear alias T o clear th e abbre viated ve rsions of co mmands, us e the clea r alias comm and.
2-8 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands clear arp clear arp T o delete a specif ic entry or all entries from the ARP table , use the cl ear arp command.
2-9 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clea r banner m otd clear banner motd T o cl ear the m essag e-o f-t he-da y banne r, use th e clear banner motd command .
2-10 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands clear boot aut o-config clear boot auto-conf ig T o cl.
2-11 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear boot dev ice clear boot device T o clear the .
2-12 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands clear boot sy stem clear boot system T o cl ear the con tent s of the B OOT envi ronm en t va ria ble and t he c onf igur ati on re gist er set ting, u se the clear boo t syste m command.
2-13 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear c am clear cam T o delete a specif ic entry or all entries from the CAM table, use the clea r cam command .
2-14 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands clear cam no tificat io n clear cam notification T o clear th e CAM notif icati on counter s and hi story log, use the cl ear cam notif ication comman d.
2-15 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear channel st atisti cs clear channel sta tistics T o clear P AgP stat istical info rmation, u se the clea r channel statistic s comm and.
2-16 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands clear conf i g clear config T o clear the system or module conf iguration information store d in NVRAM, use the clear c onf ig comm and.
2-17 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear config This e x ample sho ws how to delete al.
2-18 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands clear conf i g pvlan clear config pvlan T o clear all priv ate VL AN configurat ions in the syst em inclu ding por t mappings, use the clea r con fig pvlan comm and.
2-19 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clea r co ps clear cops T o cl ear Comm on Open Po licy Se rvi ce ( COPS) co nfigurat ions, us e t he c lea r cops comman d.
2-20 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands clear cops This example shows how to clear al l COPS ser vers: Console> (enable) clear cops server all All COPS servers cleared.
2-21 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clea r count ers clear counters T o cle ar MAC counters, Ethe rCh annel MAC counters , port count ers , and t he cha nn el tra ffi c perc en tile , use the clea r counters co mmand.
2-22 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands clear cry pto key rsa clear crypto key rsa T o remov e all RSA public-ke y pairs, use the clea r crypto k ey rsa comm and.
2-23 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear dot1x con fig clear dot1x config T o disable dot1x on all ports and return v alues to the default settings, u se the clear dot 1x conf ig comm and.
2-24 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands clear dot 1x gues t- vlan clear dot1x guest-vlan T o remove any active 802.1 x auto ports from the guest VLAN , u se th e clear dot1x gue st-vl an co mman d.
2-25 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear gmr p statistics clear gmrp statistics T o clear all the GMRP stati s tics info rma tio n from a specif ied VLAN or all VLANs, use th e clear gm rp statistics command.
2-26 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands clear gvr p stat is ti cs clear gvrp s tatistics T o clear all the GVRP statis tics info rmation , use the clea r gvrp statis tics comma n d.
2-27 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear i gmp statisti cs clear igmp statistics T o cle ar I GMP snoo pi ng st ati stica l inf orm atio n, use the clear igmp statistics command.
2-28 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands clear ip ali as clear ip alias T o clear IP al iases that wer e set using the set ip alias command , use the clear ip alias command .
2-29 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear ip dns domain clear ip dns domai n T o clear the de fault DNS domain na me, use the clear ip dns domain command.
2-30 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands clear ip dn s server clear ip dns server T o remov e a DNS s erver from the DNS serve r listing, use the clear i p dns ser ver command .
2-31 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear ip pe rmi t clear ip permit T o remov e a specified IP address and mask or all IP addresses and masks from the permit list, use the clear ip permit comman d.
2-32 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands clear ip pe rm i t Console> (enable) clear ip permit all IP permit list cleared. WARNING IP permit list is still enabled.
2-33 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear i p route clear ip route T o delete IP routi n g table entries, use the clear ip r oute command.
2-34 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands clear kerb eros clie nts m and atory clear kerberos clients ma ndatory T o disable mandatory Kerb eros authentica tion for services on the netw ork, use the clea r kerbe ros clients mandatory comm and.
2-35 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clea r ke rber os cred e nti a ls for w ard clear kerberos creden tials forward T o disa ble credent ials forw arding, use the clear kerber os cr edentials f orward command .
2-36 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands clear kerb eros cre ds clear kerberos creds T o de lete all t he Kerb eros cr edentia ls, use t he c lear kerberos creds comm and.
2-37 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear ker ber os re alm clear kerberos realm T o clear a n entry t hat m aps the nam e of a K erb eros rea lm to a D NS do main name or a hos t na me , use the clea r k er beros rea lm command.
2-38 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands clear kerb eros se rv er clear kerberos server T o clea r a s pecifi ed Ke y Distrib ution Cen ter (KDC) entry , use the clear k erber os server co mmand.
2-39 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clea r key conf i g-k e y clear key config-key T o remo ve a pri vate 3DE S key , use the clea r key con fig-key command.
2-40 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands clear l2prot ocol- tun nel cos clear l2protoco l-tunne.
2-41 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear l2pr oto c ol- tunn el s t atis t ics clear l.
2-42 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands clear lac p-ch annel st ati st i cs clear lacp-channel statistic s T o clea r Link Aggr egation Control Protocol (LA CP) statistical informat ion, use t he clear lacp-channe l statistics command.
2-43 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear lda clear lda T o remove the ac celerated server lo ad balancin g (ASLB ) MLS entries or MA C addresses from the swit ch, use the cl ear lda comman d.
2-44 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands clear lda Usage Guid el i nes This c omm and is suppor ted on ly o n sw itc he s configu red w ith th e Supe r visor En gine 1 wi th L aye r 3 Switching Engine WS-F6K-PFC (Pol icy Feature Card) .
2-45 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clea r lo ca luse r clear localuser T o delete a loca l user a ccount f rom the switch, use the clear localus er command.
2-46 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands clear log clear log T o delet e module , system error log, or dump l og entri es, use the c lea r log co mmand .
2-47 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear log comma nd clear log comma nd T o clear the command log entry table, u s e t h e clear l o g co mmand comm and.
2-48 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands clear log gi ng buffer clear loggi ng buffer T o clear th e system logg ing bu f f er , use the clea r loggi ng buffe r command .
2-49 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear loggi ng level clear logging leve l T o reset the logging le vel for a fa cility or for all f acilities to their default settings, use t he clea r logging lev el command.
2-50 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands clear log ging leve l Defaults Thi s command has no de fa ult set tings. Comma nd T ypes Sw itch co mman d.
2-51 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear logging server clear logging server T o delete a syslog serve r from the system log serv er table, use the cl ear logg ing ser ver comm and.
2-52 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands clear mls cef clear mls cef T o clear CEF summa ry statisti cs, use the cl ear mls cef com mand. clear mls cef Syntax D escr i pti on This comm and ha s no a rgume nts o r keywords.
2-53 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clea r ml s ent ry clear mls entry T o clea r MLS entr ies in the Cata lyst 6500 se ries swi tches, use the clea r mls entry co mmand.
2-54 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands clear mls ent ry Up to 16 routers can be included e xplicitly as MLS-RPs.
2-55 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear ml s entry cef adjacency clear mls entry ce f adjacenc y T o clear CEF adjacen cy statistics, u se the clear ml s entry cef adj acency co mmand.
2-56 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands clear mls excl ude pro tocol clear mls exclude protoco.
Chapter 2 Catalyst 6 500 Series Swi tch and ROM M onitor Commands clear mls multicast statistics 2-57 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 22 clear mls multicast statistics T o remov e ML S multicast sta tistics main tained b y th e MSFC on the switc h, use th e clea r mls multicast statistics command.
2-58 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands clear mls nde f low clear mls nde flow T o reset t he NDE f ilters in the Catalyst 6500 series switch es, use t h e clea r mls nde f low command.
2-59 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear mls st atistics clear mls statistics T o clear hard wa re-instal led MLS statist ics entri es, use the cl ear mls stat istics co mmand.
2-60 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands clear m ls st atistics Relat e d Commands set mls sta .
2-61 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear ml s statist ics entry clear mls statistics en try T o clear statistics for MLS entries, use the clea r mls st atistics entr y command.
2-62 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands clear m ls st atistics entry • IPX address— ipx_ne t.ipx_nod e (for exampl e 3.0034.1 245.A B45, A43.
2-63 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear module password clear module pa ssword T o clear the password set by the password [ usernam e ] N AM command, us e the cl ear m odu le pa sswor d comm and.
2-64 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands clear mult i cast route r clear multicast router T o clear manual ly config ured multicast rou ter ports from the multic ast router port list, use the clea r multicast r outer comman d.
2-65 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clea r ntp serv er clear ntp server T o r emove o ne or m ore s erver s f rom th e NT P s er ver ta bl e, u s e the c lea r ntp server command.
2-66 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands clear ntp ti mezone clear ntp timezone T o return the time zo ne to its default, UTC, use the clear ntp timezone command.
2-67 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear pbf clear pbf T o remo ve the MA C address for the PFC2, use the clear pbf command. clear pbf Syntax Descript ion This c omm and ha s no keywords or argume nts.
2-68 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands clear pbf -m ap clear pbf-map T o clear PBF map infor mation, use the cl ear p bf-ma p command.
2-69 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear pbf-map This e x ample sho ws how to clea r a.
2-70 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands clear port broa dcast clear port broadca st T o disable broadcast/multicas t suppression on one or more ports, use the clear port br oa dcast comm and.
2-71 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear po rt cops clear port cops T o clear por t roles, use the clear port cops comman d. clear por t cops mod / port rol e s ro l e 1 [ ro l e 2 ].
2-72 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands clear port hos t clear port host T o cle ar the port co nfigurati on for opti mizing a hos t connec tion, use the clear port host comm and.
2-73 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear port qos cos clear port qos cos T o return the v alues set by the set port qos cos command to the def ault settings for all specified ports, use the clea r port qo s cos co mmand.
2-74 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands clear port se curity clear port security T o clear al l MA C add r ess es o r a s p eci f ic MA C address fr o m th e lis t of se cu re MA C addresses o n a p o rt, use the clea r port securit y command.
2-75 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear pvla n mapping clear pvlan mapping T o d ele te a pr ivate VLAN mappi n g, use t h e clear pvlan mapping command.
2-76 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands clear qos acl clear qos acl T o remo ve v arious A CL conf igurat ions , use the cl ear qos acl command .
2-77 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clea r qos acl This e xample sho ws ho w to det ach an A CL from a specif ic VLAN: Console> (enable) clear qos acl map ftp_acl 4 Hardware programming in progress.
2-78 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands clear qos conf ig clear qos config T o the defau lt settings and delete th e CoS assigned to MAC a d dresses, use the clear q os config co mm an d to return the v alues set by the set qos command .
2-79 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear qos cos-dscp -map clear qos cos-dsc p-map To clear CoS-to-DSCP mappin g set by the set qos cos- dscp-map command and return to the defa ult setting, u se the c lea r qos co s-ds cp-m ap command .
2-80 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands clear qos dscp-c os- map clear qos dscp-c os-map To cl.
2-81 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clea r qo s ipp rec -d sc p- ma p clear qos ipprec .
2-82 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands clear qos m ac-c os clear qos mac-c os T o clear the v alues set by the set qos mac-cos command, use the clear qos mac-cos comm and.
2-83 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clea r qo s map clear qos map T o return the v alues to the default settin gs, use the clear qos map comm and.
2-84 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands clear qos m ap Exam ples This example sho w s how to return the values to the de fault settin gs: Console> (enable) clear qos map 2q2t This command will take map values back to factory default.
2-85 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clea r qo s pol ic ed -ds c p-ma p clear qos policed -dscp-map T o reset t he police r-t o-dscp map ping tabl e to the defaul ts, use th e clear qos policed-dscp-map .
2-86 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands clear qos pol icer clear qos policer T o clear policin g rules f rom N VRA M, use the clear qos polic er co mmand.
2-87 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear qos polic er This exam pl e sh ows how t o clear a specif ic aggre gate policing rule: Console> (enable) clear qos policer aggregate my_micro my_micro QoS microflow policer cleared.
2-88 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands clear qos statis ti cs clear qos statistics T o clear QoS stati stic counte rs, use the clear qos sta tistics comm and.
2-89 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear radius clear radius T o clear one or all of th e RADI US serv ers fro m the RADI US serv er tab le or r emov e a shared k ey entry , use the clear ra dius comm and.
2-90 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands clear rcp clear rcp T o clear rcp infor mation for f ile transfe rs, use th e clear r cp comman d. clea r rcp Syntax D escr i pti on This comm and ha s no a rgume nts o r keywords.
2-91 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear r gmp statis tics clear rgmp statistics T o clear RGMP s tatistics informati o n for all VLANs, use the clea r rgmp stat istics co mmand.
2-92 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands clear sec urity acl clear security acl T o remove a specific acces s contr ol entry (ACE) or all ACEs from a VACL and to delete th e VACLs from the edit buf fer , use the clear s ecurity acl command .
2-93 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear securit y acl Usage Guid el i nes Changes you make by enterin g this com mand are saved to NVRA M and hardware only af ter you en ter the commit command.
2-94 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands clear sec urity acl cap ture-po rts clear security acl captu re-ports T o re move a po rt from the captur e port list, use the clear security a cl capture - ports comman d.
2-95 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear securit y acl log f low clear security acl log flo w T o clea r all f lows in the security A CL log tabl e, use the c lear security ac l log flo w command .
2-96 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands clear sec urity acl m ap clear security acl map T o re move VAC L-to-VLAN mapping, use the clear securit y acl map comm and.
2-97 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear security acl map This e xample shows how to rem ov e all VACL-to-VLAN m appings fr om a specif ic VLAN: Console> (enable) clear security acl map 5 Map deletion in progress.
2-98 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands clear snm p access clear snmp access T o remove the acce ss rights of an SNMP gro up, use the clear sn mp acce ss comma n d.
2-99 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear snmp access-l ist clear snmp acces s-list T o clear the IP ad dress of a host that is ass ociated with an access lis t number , use the clea r s nm p access-list command.
2-100 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands clear snm p commu nity clear snmp communit y T o clear an SNMP co mmunity table, use the clear s nmp community command.
2-101 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clea r snmp commun ity-ext clear snmp communit y-ex t T o clea r an e xisting commun ity strin g, use the clear s nmp com mu nity-e xt comman d.
2-102 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands clear snm p group clear snmp grou p T o remo ve the SNMP user fr om an SNMP grou p, use the clea r snm p group co mmand .
2-103 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear snmp ifalias clear snmp i falias T o clea r an SN MP interf ace alias, u se th e clear snmp if alias comm and.
2-104 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands clear snm p notify clear snmp notify T o clear the SNMP notify name in the snmpNotifyT able, use the clear snmp notify co mmand.
2-105 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear snmp targe taddr clear snmp targetadd r T o clear the SNMP tar get address entr y in the T arge tAddressT able, use the clear snmp tar getaddr comm and.
2-106 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands clear snm p target par ams clear snmp targ etparams T o clear the SNMP tar get parameter s used in the snmp T argetP aramsT able, use the clea r snmp target par am s com mand .
2-107 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear snmp trap clear snmp t rap T o cle ar an en tr y from th e SNMP trap re ceiver table, use t he clea r sn mp tra p command.
2-108 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands clear snm p user clear snmp us er T o remo ve an SN MP user , use the c lear snmp user comman d.
2-109 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clea r sn m p view clear snmp vi ew T o remo ve the MI B view en try from the v acmV ie wT reeF amilyT able, use the clea r snmp view comm and.
2-110 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands clear spa ntree d ete cted-p rot ocols clear spantree.
2-111 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clea r s pa ntr e e m s t clear spantree mst T o clear the map ping of VLA Ns to an MST instanc e, use the clea r spantr ee mst co mman d.
2-112 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands clear spa ntree p ort cost clear spantree portc ost T o clear th e port cost o f a port on the switc h, use the clea r spant ree por tcos t comm and.
2-113 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear span tree portinstan cecost clear spantree porti nstanceco st T o restore the def ault path cost to an instance on a port, use the clear s pantr ee portinstancecos t comm and.
2-114 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands clear spa ntree p ort instance cost Relat e d Command.
2-115 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear spantree po rtinstancepri clear spantree porti nstancepri T o restore the def ault path cost to an instance on a port, use the clear s pantr ee portinstan cepri comm and.
2-116 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands clear spa ntree p ort pri clear spantree portp ri T o clear the port priority of a port on the switch, use the clear sp antr ee portpri comm and.
2-117 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear sp an tre e por tvla nco st clear spantree portv lancost T o restore the def ault path cost to a VLAN on a port, use the clear span tree port vlanc ost command .
2-118 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands clear spa ntree p ortvlanc ost Usage Guid el i nes This command is valid in PVST+ mode only . If you do not spe cify a VL AN, a ll V LAN s ar e cle are d.
2-119 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear sp an tre e por tvla npr i clear spantree portv lanpri T o reset the spanning tree port VLAN prior ity , use the clear spantr ee portvlanpri comm and.
2-120 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands clear spa ntree ro ot clear spantree root T o resto r.
2-121 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear spantree r oot This e xample sho ws ho w to clear th e spanning tr ee root on an instance: Console> (enable) clear spantree root mistp-instance 1 Instance 1 bridge priority set to 32768.
2-122 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands clear spa ntree sta tistics clear spantree statistic s T o clear the s panning tree stat istics, use the clear s pant ree statis tics command.
2-123 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear sp antree stati stics This e x ample sho ws .
2-124 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands clear spa ntree u pli nk fast clear spantree uplink f.
2-125 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear ta cacs key clear tacacs key T o remov e the ke y setting used for T A CACS+ authen tication and encryption, use the clear ta cacs key comm and.
2-126 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands clear tac acs se rve r clear tacacs serv er T o remo ve a host fr om the lis t of T A CA CS+ serv ers, use the clea r taca cs server comma nd.
2-127 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear timezone clear timezone T o return the time zo ne to its default, UTC, use the clear t imezone command .
2-128 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands clear top clear top T o sto p the T opN process, us e th e clea r top command . clear to p { all | r e port_nu m } Syntax D escr i pti on Defaults Thi s command has no de fa ult set tings.
2-129 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clea r tr un k clear trunk T o restore a trunk port to its defa u lt trunk type and mode or to clear specif ic VLANs from the allo wed VLAN list for a trunk port , use the clear trunk comman d.
2-130 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands clear vl an clear vlan T o delete an ex isting VLAN from a manage ment domain or to clear VLANs that are secured b y a Fire wall Ser vices Module, use the cl ear vlan comm and.
2-131 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s cle ar v lan Relat e d Commands set vlan show vlan.
2-132 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands clear vl an co unters clear vlan counte rs T o retu rn the soft ware- cache d counte rs to 0 for all VLANs, use the clear vl an co unte rs co mman d.
2-133 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear vla n mapping clear vlan mapping T o delet e existing IEE E 802.1 Q VLAN-to- ISL VLAN mapping s or reserved-t o-nonre served VLAN mappin g, use the clear vlan mapping command.
2-134 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands clear vl an mappi ng Relat e d Commands set vlan show.
2-135 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear vmps r cp clear vmps rcp T o delete the VMPS rcp username from the VMPS serv er table, use the clear vmps rcp command.
2-136 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands clear vm p s serv er clear vmps server T o de lete a VMP S server from th e VMP S serv er table, u se the clea r vmps serv er command.
2-137 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s clear vmp s statisti cs clear vmps statistics T o delete e xisting VMPS statistics, use the clear vmps statisti cs command .
2-138 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands clear vt p pru neeli gib le clear vtp pruneeligibl e T o specify which VLANs in the VTP domain are ine ligible f or pruning, use th e clear vt p pr unee ligible command .
Chapter 2 Catalyst 6 500 Series Swi tch and ROM M onitor Commands clear vtp statistics 2-139 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 2 clear vtp statistics T o delete VTP statistics, u se the clear v tp stat istics comman d.
2-140 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands commit commit T o commit al l A CEs or a specif ic A CE in NVRAM that has not been written to hardw are, use the commit comm an d.
2-141 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s comm it Relat e d Commands ro llback.
2-142 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands commit lda commit lda T o commit ASL B confi g uration that h as not bee n written to h ardwar e to NVRAM, use the commit lda comm and.
2-143 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s configu r e configure T o download a c onfiguration file from an rcp se rver or the networ k and execute each c omman d in that fi le, use the conf igure comman d.
2-144 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands configu re Wed May 19 1999, 17:42:50 >> set ip alias conc7 198.133.219.207 IP alias added. >> set ip alias montreux 198.
2-145 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s confr eg confreg T o conf ig ure the config uration reg ister utility , use the confr eg co mmand. confreg [ num ] Syntax Descript ion Defaults Thi s command has no de fa ult set tings.
2-146 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands confreg enter to boot: 0 = ROM Monitor 1 = the boot h.
2-147 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s cont ext context T o di splay the con text of a l oade d im age, use the contex t command. cont ext Syntax Descript ion This c omm and ha s no a rgume nts o r keywords.
2-148 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands context a0 : 00000000 00000400 | s4 : 00000000 000000.
2-149 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s copy copy T o uploa d or download a Flash ima ge or a s wit ch configur at ion to or fro m a Flas h device, rcp server , or TFTP se rver, use t he copy comm and.
2-150 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands copy Comma nd T ypes Sw itch co mman d.
2-151 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s copy Exam ples Th is exampl e sh ows how to use t he copy command to upload t he switch c o nfig uration to a f ile named cat.
2-152 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands copy Console> (enable) copy tftp config IP address or name of remote host? 172.20.22.7 Name of configuration file? cat.
2-153 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s copy This example shows ho w t o configure a Cata .
2-154 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands copy Relat e d Commands conf igure set boot config-r .
2-155 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s delete delete T o delete a conf iguration f ile, use the del ete comm and. delete [[ m/ ] device : ] file n a me Syntax Descript ion Defaults Thi s command has no de fa ult set tings.
2-156 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands dev dev T o list t he de vice IDs av ailable on a switch, use the de v command. dev Syntax D escr i pti on This comm and ha s no a rgume nts o r keywords.
2-157 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s dir—RO M monit or dir—ROM monitor T o list the files of the name d device, use the dir comman d. dir de vice Syntax Descript ion Defaults Thi s command has no de fa ult set tings.
2-158 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands dir—swit c h dir—switch T o display a list of f iles on a Flash memory dev ice, use the dir command.
2-159 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s dir—switch Exam ples This example sho ws how to .
2-160 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands disabl e disable T o re turn t o n orma l mo de from p rivileged mo de, use the disable comman d. disable Syntax D escr i pti on This comm and ha s no a rgume nts o r keywords.
Chapter 2 Catalyst 6 500 Series Swi tch and ROM M onitor Commands discon nect 2-161 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 22 disconn ect T o clo se an ac tive console po rt or T elnet se ssion, use the di sconnect command .
2-162 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands downlo ad down load T o copy a software im age from a specified host to the Flash me mory of a designate d module , use the download command.
2-163 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s download The download seri al comm and uses Kermit through th e serial EI A/TIA -232 conso le port. The download serial co mman d is not allowed from a T elne t session.
2-164 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands downlo ad This sam ple sessio n shows how to connect .
2-165 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s download This example shows ho w to upgrade the EPLD ima ge in force mod e on the modu le in slot 5: Console> (enable) download epld aq_cr128_art.
2-166 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands enable enable T o ac tivate privileged mo de, u se the enable com ma nd. I n p rivileged mo de , ad di tio na l c omm ands ar e av ailable, and cer tain comman ds disp lay additi onal informa tion.
Chapter 2 Catalyst 6 500 Series Swi tch and ROM M onitor Commands format 2-167 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 22 format T o fo rmat boo tflas h or a Fl ash PC ca rd (a Flash d evice must be fo rmat ted be fore it ca n be u sed), u se the fo r m a t command.
2-168 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands format Y ou can al so specify device1 : monlib-f ilen.
2-169 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s fram e frame T o displ ay an individual stac k fram e, use the fr ame command.
2-170 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands fsck fsck T o che ck a Flas h file s yst em f or da mage and t o repa ir any pr oble ms, u se t he fsck comman d.
2-171 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s fsc k Ente r th e dir command ag ain to see that t.
2-172 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands histor y—ROM mon it or history—ROM monitor T o displ ay the co mman d history (th e last 16 co mman ds executed in the ROM monitor e n vironment ), use the history co mmand .
2-173 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s history—swi tch history—switch T o s how the co nt en ts of t he co mma nd hist ory buffer , use th e history command.
2-174 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands l2tra ce l2trace T o displa y the Layer 2 path taken by th e packe ts that sta rt at a specif ied sourc e address and end at a specif ied d estination address, us e the l2trace command .
2-175 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s l2trace The Lay er 2 trace feature is not sup ported when multiple de vices ar e attached to one po rt throug h hubs (for exa mple, multiple CDP neighbors detected on a port).
2-176 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands l2tra ce This examp le shows how to display a su mmar.
2-177 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s meminfo meminfo T o display informat io n about the main memory , p acket memory , and NVRAM, use the me min fo command.
2-178 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands ping ping T o s end I CM P e ch o-req ue st pa cket s to an othe r nod e on t he n etwor k, use t he ping command .
2-179 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s ping The guide lines for th e ping -s command are as fo llows: • The maximum w aiting time befor e timing out is 2 seconds.
2-180 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands ping 64 bytes from elvis: icmp_seq=4. time=11 ms 64 bytes from elvis: icmp_seq=5. time=7 ms 64 bytes from elvis: icmp_seq=6.
Chapter 2 Catalyst 6 500 Series Swi tch and ROM M onitor Commands pwd 2-181 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 22 pwd T o show the cu rrent sett ing of the cd command, use the pwd comm and.
2-182 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands quit quit T o exit a CLI session, use the quit comm and. quit Syntax D escr i pti on This comm and ha s no a rgume nts o r keywords.
2-183 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s reconfi rm vmps reconfirm vmps T o reconf irm the curr ent dynam ic port VLA N members hip assign ments with the VMPS s erv er , use the reconf irm vmps comm and.
2-184 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands reload reload T o force a module to acc ept a do wnload through SCP , use the reload comm and. Th is com mand rese ts the module and prompt s you to initia te a download when th e reset is com plete.
2-185 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s repeat repeat T o repeat a com mand, use the repe a t command . rep e a t [ num | string ] Syntax Descript ion Defaults If no argu ment is specifie d, th e last command is repeated.
2-186 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands repeat rommon 23 > repeat dir dir bootflash: File .
2-187 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s reset—ROM moni tor reset—ROM monitor T o perf orm a soft re set of t he swi tch, use the res et ROM monit or c om mand.
2-188 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands reset—s witch reset—switch T o restart the system or an ind ividual module, schedule a system reset, or cancel a sche duled reset, use the res et command.
2-189 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s reset—switch Y ou can use the rese t min down command to reset the switch as part of a minimal do wntime software upgrade in a system with a redundant supervi sor engine .
2-190 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands reset—s witch This e xample sho ws ho w to schedule.
Chapter 2 Catalyst 6 500 Series Swi tch and ROM M onitor Commands rest ore co un te rs 2-191 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 2F2 restore counters T o rest ore MA C and port co unters, use the re stor e counters command.
2-192 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands rollbac k rollback T o clear chan ges made to the A C L edit buf fer since its last sa ve, use the r ollback command .
2-193 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s session session T o open a se ssion with a mod ule (for e xample, the MSM, N AM, or A TM) , use the session comman d.
2-194 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set set T o display all of the R OM monitor va r iable names with their v alues, use the set comman d. set Syntax D escr i pti on This comm and ha s no a rgume nts o r keywords.
2-195 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set ac cou nt in g co mm an ds set accountin g commands T o en able comm and ev ent acco unting on t he swit ch, use the set accounting commands comm and.
2-196 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set acco unt ing con nec t set accountin g connect T o ena ble a cco unti ng of o utbou nd co nne ctio n events on t h e switc h, use the set accounting co nnect comm and.
2-197 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set accou nting ex ec set accountin g exec T o enabl e account ing of norm al logi n sessions on th e switch, use the se t acco untin g exec comman d.
2-198 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set acco unt ing exe c Relat e d Commands set account.
2-199 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set account ing suppress set accountin g suppress .
2-200 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set acco untin g sy stem set accountin g system T o enable acc ounting of system e ve nts on the switch, use the set ac count ing system command .
2-201 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set accounti ng system Relat e d Commands set acco.
2-202 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set acco unt ing upd ate set accountin g update T o con figure the fr equen cy of account ing updat es, use th e set accounting update command.
2-203 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set acllog ratelimit set acllog ratelimit T o lim it the nu mbe r of pa ckets se nt to the r oute p roc essor CPU for bri dged ACEs, use the set ac llog rate limit command .
2-204 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set aclme rge algo set aclmerge algo T o selec t the A CL mer ge algori thm, u se the set acl merge alg o command.
2-205 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set aclm erge bdd set aclmerge bdd T o enabl e or disab le the bina ry dec ision diag ram (BDD ) A C L merge algor ithm, use the set a clmerge bdd comm and.
2-206 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set al ias set alias T o define a li ases (sho rtha nd versi on s) of co mm an ds, use the se t al ias command.
2-207 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s s e t ar p set arp T o add IP ad dress- to-MA C address mapping entries to the ARP tabl e and to set th e ARP aging time for the table , use the set arp command .
2-208 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set ar p This e xample sho ws how to conf igure a permanent ARP entr y , which will remain in the ARP cache after a system reset: Console> (enable) set arp permanent 198.
2-209 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set authentication enable set authentica tion enab.
2-210 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set authent ication enable Usage Guid el i nes Use au.
2-211 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set auth enticati on login set authentica tion login T o enable T A CA C S+, RADIUS, or K erberos as the authenticati on method for log in, use the set authen tic atio n l og in command.
2-212 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set a uth e n t ic a t ion lo g in Usage Guid el i nes This comm and all ows you to choose th e authen tica tion meth od for the we b interfac e.
2-213 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set au tho riz at io n comm an d s set authorizatio n commands T o enable auth orization of comman d e vents on the switc h, use the set authorizat ion comm ands comm and.
2-214 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set authori zation com m a nds Exam ples This exampl .
2-215 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set authori zation ena ble set authorizatio n enable T o enable auth orization of pri vileged mode sessions on the switch, use the set author ization en able comm and.
2-216 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set a uth o r i zat ion e n a b le Exam ples Th is ex.
2-217 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set authorization exec set authorizatio n exec T o enable auth orization of ex ec, normal login mode, sessio n ev ents on the switc h, use the set authorization e xec command.
2-218 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set authori zation exec Exam ples This example sho ws.
2-219 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set ba nne r lc d set banner lc d T o con figure th e Ca talyst 650 0 se rie s Swi tc h Fabric Mod ule L CD use r bann er, use the set banner lcd comm and.
2-220 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set bann er m ot d set banner motd T o prog ram an MO TD banner to appear befo re ses sion log in, us e the set banner motd comman d.
2-221 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set banner tel net set banner te lnet T o di splay o r s uppr ess t he “ Cisc o System s Conso le” T elnet ba nner me ssage , use the s et banner telnet comm and.
2-222 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set boot aut o-conf ig set boot auto-con fig T o specif y one or mor e configur ation files to us e to config ure the switc h at bootup, use the set boot auto-c onfig comm and.
2-223 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set boo t config -regist er set boot config -register T o con fi gu re t he b oot co nfi gu rat ion regi ster va lue , use th e s et bo ot co n fig-regis te r co mman d.
2-224 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set boot conf ig-regis t er The baud rate speci fied in the conf iguration re gister is use d by the R OM monito r only and is dif feren t from the baud rate spe cif ied by the set system baud command.
2-225 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set boo t config -regist er Relat e d Commands cop.
2-226 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set boot conf ig-regis t er auto-c onf ig set boot config -register au to-config T o configure auto -config file dispe nsation, use the set boot conf ig-reg ister auto -conf ig co mmand .
2-227 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set boot config-register auto-config If you use the set boot auto-con f ig bootflash: switch.cf g with the overwri te option , you mu st use the copy conf ig bootflash:switch.
2-228 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set boot conf ig-regis t er auto-c onf ig This e xamp.
2-229 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set boot device set boot device T o set the Network Analysis Module (NAM) or Int rusion Detection System (IDS) boot environment, use the set boot device command .
2-230 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set boot dev ice This example shows ho w to specify m.
2-231 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set boot sync no w set boot sync now T o imm ediately initiate synchr onization of the s ystem im age be tween th e acti ve an d redund ant supervi sor engine, use the set bo ot sync now command.
2-232 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set boot system f lash set boot system fla sh T o set the BOOT envi ronment v ar iable tha t specif ies a li st of ima ges th e switc h load s at sta rtup, u se th e set boot system flas h com mand.
2-233 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set bo ot system flash Relat e d Commands clear bo.
2-234 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set ca m set cam T o add entries int o the CAM table, set the agin g time for the CAM table, and c on fi gu re t raf f ic fi lt er in g from and to a specifi c host, us e t he set cam co mmand .
2-235 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set ca m Usage Guid el i nes If the gi ven MA C ad.
2-236 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set cam not if i cation set cam notification T o enab.
2-237 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set cam notification Command Mode s Pri vile ged.
2-238 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set cam not if i cation Relat e d Commands clear ca m.
2-239 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set cd p set cdp T o ena ble , disa ble, or co nfigure Ci sco D isc overy Protoc ol (CD P) fea ture s g loba lly on al l po rts o r on specif ied p orts, use the set cdp co mman d.
2-240 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set cd p Usage Guid el i nes The set cdp v ersion command allo ws you to global ly set the hi ghes t version n umber of CDP p ackets t o send.
2-241 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set channelprotocol set channelp rotocol T o set th e protoc ol that man ages chan nelin g on a module , use the se t channe lprotocol comman d.
2-242 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set chan nel protoc ol Relat e d Commands clear la cp.
2-243 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set c hannel vlancost set channel vla ncost T o s et the ch an nel V LAN co st, use th e set channel vlancost comm and.
2-244 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set chan nel vlanc ost After you enter this comm and, you must reenter the set s pantr ee portvlanco st comm and so th at the desired VLAN or VL ANs are a ssociated with all th e channe l ports.
2-245 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set config acl nvram set config acl n vram T o copy the curren t commi tted A CL co nfiguration fr om DRA M back into NVRA M, us e the set config acl n vram com ma nd .
2-246 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set config mode set config mod e T o chang e the conf.
2-247 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set confi g m ode In relea se 7.6(1 0) and lat er releas es, the maxi mum valu e that you can set for the mins v al ue i s 35000 minutes ( 25 days).
2-248 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set cops set cops T o conf igure COPS funct ionality , use the set cops comm and.
2-249 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set cops Names such as the ser ver , domain-name, an d roles can contain a max imum of 31 characters ; longer names are truncate d to 31 characters.
2-250 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set cryp to ke y r sa set crypto key rsa T o gen erate and c onfigure an RSA key pa ir, use the set c rypto key rsa command.
Chapter 2 Catalyst 6 500 Series Swi tch and ROM M onitor Commands set def ault port status 2-251 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 222 set default portstatus T o set t he def ault port sta tus, use the set default portstatus com mand.
2-252 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set dot1q- all-tagg ed set dot1q-all-tagged T o chang e all existing and new dot1q trunk s to the dot1q- only mode , use the set dot1q-all-tagged comm and.
2-253 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set dot1x set dot1x T o conf igure dot1 x on a syste m, use the set do t1x comm and.
2-254 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set d ot1x • re-a uthperiod is 3600 secon ds • supp-timeout is 30 seconds • server-timeo ut is 30 seco nds • max-req count is 2 • shutdown-timeout is 300 seconds.
2-255 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set dot1x This e xample sho ws you ho w to sp ecif.
2-256 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set e nab lep a s s set enablepa ss T o change the passw ord for the pri vileged le vel of the CLI, use the set enablepass comm and.
2-257 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set er rdisabl e-time out set errdisable-timeout T o conf igure a ti meout to au tomatically r e enable p orts that are in the er rdisable st ate, use the set errdisable -timeout comm and.
2-258 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set errdisa ble-time out Y o u can enable or disable e rrdisable t imeout fo r each of the reason s that are lis ted.
2-259 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set er rordetect ion set errordetection T o enabl e or disab le various erro r detect ions, us e the set err ordete ction command .
2-260 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set errord et ection Relat e d Commands sho w err ord.
2-261 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set fea ture ag g-link- partner set feature ag g-link-partner T o enable or dis able the aggres si ve link partn er featu re, use the set fe ature agg-link-partner command.
2-262 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set feature dot1x -rad ius-k eep alive set feature do t1x-radius-keep alive T o ena ble o r disab le the 80 2.
2-263 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set feature mdg set feature mdg T o enable or disable the multiple defau lt gate way feature, use the set feature mdg command.
2-264 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set garp timer set garp timer T o adjust the v alues of the join, leav e, and leav eall timers, u se the set garp timer com mand .
2-265 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set gmrp set gmrp T o enable or d isable GARP Mult icast Reg istration Protoco l (GMRP) on the swit ch in all VLANs on all ports, use the set gm rp comman d.
2-266 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set gmrp f wdall set gmrp fwdall T o enab le or di sable the Forward All fe ature on a specified port or mo dule an d port lis t, use t he set gmrp fwdall comman d.
2-267 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set g mrp regi strat ion set gmrp registration T o spec ify the GMRP regi strat ion type, us e the set gmrp regist ration co mmand.
2-268 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set gmrp timer set gmrp timer T o adjust the v alues of the join, leav e, and leav eall timers, u se the set gmrp timer comman d.
2-269 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set gmrp timer This e xam pl e sho ws how to set t.
2-270 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set gv rp set gvrp T o enab le or disa ble GARP V LAN Registration Protocol (GVRP) globally in the switch or on a pe r-port basis, use the set g vrp command.
2-271 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set gvrp ap plicant set gvrp appli cant T o s pecify whether or not a VLAN is de clare d out of blocki ng ports, use the set gv rp ap pli cant comm and.
2-272 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set gvrp dyna mic- vlan- creati on set gvrp dynamic-vlan-creatio n T o enab le or d isable dynamic VLAN creatio n, use the s et gv rp dynamic-v lan-c reation command.
2-273 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set gvr p regist ration set gvrp reg istra tion T o s et the ad mini stra tive contro l of a n outbo und po rt a nd a pply t o all V L ANs on the tr unk , use t he set gvr p re gistra tion comma nd.
2-274 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set gvrp r egi stratio n This e xample shows ho w to .
2-275 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set gvrp timer set gvrp timer To adju st the v alues of th e join, le av e, and lea veall time rs, use the set gvrp timer command.
2-276 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set gvr p timer This e xam pl e sho ws how to set t h.
2-277 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set igmp set igmp T o ena ble o r di sab le Inte rnet Group Ma nag eme nt Pr otoc ol ( IG MP) s noop ing on the swi tch , use the set ig mp command.
2-278 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set ig mp fastbl ock set igmp fastblock T o enable or d isable the IGMP v ersion 3 fast-bloc k mechanism on the switch, use the set i gmp fastb lock comm and.
2-279 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s se t igmp fastleave set igmp fastleave T o ena ble o r di sab le Inte rn et Group M anag em ent Prot ocol (IG MP) fa stleave proc essin g, us e the set i gmp fa stleave comman d.
2-280 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set igmp flo odi ng set igmp flooding T o acti vate o r to p re ven t flooding o f multica st traf fic a fter the last host lea ves a m ulticast group, e nter the set igmp f loodin g co mman d.
2-281 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set igmp leave-quer y-type set igmp leave-que ry-type T o s et the t ype o f que ry t o be se nt w h en a po rt r ece ives a leave messag e, us e the se t igmp lea ve-query-type comman d.
2-282 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set igmp mode set igmp mode T o s et the IG MP snoopi n g m ode, us e th e set igmp mode co mmand .
2-283 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set igmp ratelimit set igmp ratelimit T o enable o r disable IGMP rate limiting or to set t h e rate limit for I GMP snooping p ackets, use the set igmp ratelimit comman d.
2-284 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set i gmp rate lim it Usage Guid el i nes The set igmp ratelimit { en ab le | disable } comma nd i s suppor ted in bot h t ext and bina ry c onfiguratio n modes.
2-285 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set igmp querier set igmp querier T o conf igure the IGMP q uerier fo r a specif ic VLAN, use the set igmp quer ier command .
2-286 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set ig mp querier This exampl e shows ho w to set the.
2-287 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set igmp v3- processing set igmp v3-processing T o explic itly e nabl e or disa ble I GMP version 3 snoo ping, u se the set igmp v3-processing comm and.
2-288 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set inline pow er def aul ta llocati on set inlinepower defaultallocation T o set t he def ault po wer allocation for a po rt, use th e set inl inepower defaultallocation command.
2-289 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set interface set interface T o conf igure the in- band and Serial L ine Inter net Proto col (SLIP) interf aces on the switc h, use th e set interface command.
2-290 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set in terfac e Usage Guid el i nes The set interfac e sc0 dchp command i s valid only whe n the address is learned f r om the DHCP server and available in privile ged mode only.
2-291 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set interface This exa mple sho ws ho w to releas e a DHCP- learned IP address back to the D HCP IP addres s pool : Console> (enable) set interface sc0 dhcp release Releasing IP address.
2-292 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set i p a l ia s set ip alias T o add aliases o f IP addresses, use the s et ip alias comman d. set ip alias name i p_addr Syntax D escr i pti on Defaults The de fault configurat ion is one IP al ias (0.
2-293 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set ip dns set ip dns T o enab le or dis able DNS, use the set ip dns comman d. set ip dns { ena bl e | di sa ble } Syntax Descript ion Defaults The def ault is DNS is d isabled.
2-294 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set ip dn s domai n set ip dns domain T o set t he defau lt DNS doma in name, u se the se t ip dns doma in command.
2-295 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set ip dns server set ip dns server T o set the IP addre ss of a Dom ain N ame Sy ste m (DNS ) server, use the se t ip dns server comman d.
2-296 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set i p fr agm en t atio n set ip fragmentation T o ena ble or d isable t he frag menta tion of IP packe ts bridge d betw een FDDI and Et herne t networ ks, use the set ip fragment ation command.
2-297 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set ip http port set ip http port T o conf igure the TCP port num ber for the Hy perT ext T ransfer Proto col (HTTP) serv er , use the set ip http port comma nd.
2-298 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set i p ht tp ser v er set ip http server T o e na bl e o r di sab l e th e H TT P se rver, use th e se t ip http server comma nd.
2-299 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set ip permit set ip permit T o enable o r disable the IP permit li st and to specify IP a ddresses to b e added to the I P permit list , use the set ip permit com mand.
2-300 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set i p p e rm it Exam ples This example sho ws how to add an IP address to the IP permit list: Console> (enable) set ip permit 192.
2-301 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set ip redirect set ip redirect T o enable o r disabl e ICMP redire ct me ssage s on the Catalyst 6500 se ries switches, u se the set ip redirect co mman d.
2-302 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set ip route set ip route T o add IP addr esses or alia ses to the IP routing t able, use the set ip route command .
2-303 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set ip route Exam ples These exam ples sho w how t.
2-304 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set ip unreac hable set ip unreachabl e T o enable or disable ICMP unreac hable messages o n the Catalyst 6500 ser ies switc h, use the set ip unreac hable comm and.
2-305 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set kerb eros cli ents mandat ory set kerberos cli.
2-306 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set kerbe ros credent ia ls for ward set kerberos cre.
2-307 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s se t k er ber os lo cal -r eal m set kerberos local-realm T o conf ig ure a switch to authentica te users def ined in the K erberos database, use the set kerberos local-r ealm co mmand .
2-308 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set kerbe ros realm set kerberos realm T o map th e name of a Kerberos re alm to a DNS domai n name or a host name, use the set ke rberos realm comm and.
2-309 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set k erb eros se rv er set kerberos server T o s pecify whi ch Key Distribution Ce nte r (K DC) to us e on the swi tch , use the se t kerberos server comm and.
2-310 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set kerbe ros srvt ab entry set kerberos srvtab ent ry T o enter the SR VT AB f ile directly into the switc h from the comma nd line, use th e set kerberos srvtab entry command.
2-311 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set kerbero s srvtab entry Exam ples This example sho ws how to enter a SR VT AB file dire ctly into the switch: Console> (enable) set kerberos srvtab entry host/niners.
2-312 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set kerbe ros srvt ab rem ote set kerberos srvtab re .
2-313 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set key config- key set key config-key T o d efine a private 3DES key , use th e set key conf ig-ke y command .
2-314 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set l2prot oco l-tun nel cos set l2protoco l-tunnel c os T o apply a CoS value to all ingress tunneling ports, use the set l 2protocol-tunnel cos comm and.
2-315 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set l2p rotocol-tunnel trunk set l2protoco l-tunnel trunk T o set La yer 2 proto col tunnel ing on tru nks, use the set l2pr ot ocol-tunnel trunk comman d.
2-316 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set lacp-ch annel s ys te m-prior it y set lacp-channe l system-priority T o set t he priority o f the sy stem, use th e set lacp-channel system-priority command.
2-317 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set lcperroraction set lcperrorac tion T o con fig.
2-318 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set ld a set lda T o conf ig ure the ASLB information on the Catalyst 6500 series switch , use the set lda comman d.
2-319 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set lda Usage Guid el i nes This c omm and is suppor ted on ly o n sw itc he s configu red w ith th e Supe r visor En gine 1 wi th L aye r 3 Switching Engine WS-F6K-PFC (Pol icy Feature Card) .
2-320 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set ld a This e xample sho ws ho w to specif y the rout er VLAN: Console> (enable) set lda router 110 4/26 Successfully set router vlan and ld port.
2-321 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set length set length T o conf igure the nu mber of lin es in t he terminal d isplay screen, u se the se t length co mman d.
2-322 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set l o c a lu ser set localuser T o conf igure the switch to u se loc al u s er auth en tic atio n to auth en tic ate ac ces s o n the s witch , use the set localuser command.
2-323 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set localuser Exam ples This examp le sho ws ho w .
2-324 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set loggin g buffer set logging bu ffer T o lim it the numbe r of sy stem logg i ng me ssage s buffered, use th e set logging buffer comman d.
2-325 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set logging console set logging co nsole T o enable and disable the sendi ng of sy stem l ogging messages to the console , use t he set logging co nsole comm and.
2-326 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set logg in g history set logging hist ory T o s et th e numbe r an d s ev erity level of sysl og me ssages se nt t o the sysl og hi story ta ble, u se the set log gin g hist ory command .
2-327 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set loggi ng level set logging leve l T o set the faci lity and se verity lev el used when logging system messages, use the se t logging level comm and.
2-328 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set l o g g in g leve l Defaults The defau lt is faci lity is set to all , and leve l is se t to 0 . Comma nd T ypes Sw itch co mman d.
2-329 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set loggi ng level Exam ples This example shows h .
2-330 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set logg ing se rve r set logging server T o ena ble .
2-331 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set logging server Comma nd T ypes Sw itch co mman d. Command Mode s Pri vile ged. Usage Guid el i nes Y ou ca n also se t the loggin g lev el by using th e set l ogging level command.
2-332 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set l o g g in g sess io n set logging sessi on T o enable o r disab le the sending of sy stem logging messa ges to the c urrent log in session , use the se t logging session co mmand .
2-333 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set logging telnet set logging teln et T o enab le or dis able loggi ng on T elnet sessi ons, us e the set logging telnet command.
2-334 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set l o g g in g tim esta mp set logging timestamp T o enab le or disabl e the time -stamp displa y on system logging m essages, us e the set logg ing times tamp comm and.
Chapter 2 Catalyst 6 500 Series Swi tch and ROM M onitor Commands set logout 2-335 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 22 set logout T o set t he number of minutes until th e system di sconnects an idle session automatically , use the set logout command.
2-336 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set m l s ag in gt ime set mls agingtime T o specify the MLS agin g time of shortcuts to an MLS entry in the Catalyst 6500 series switches, use the set mls agingtime comm and.
2-337 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set mls agingti m e If you ente r any of the set mls commands on a Cat a lyst 65 00 series sw itch without MLS, thi s warnin g message di splays: MLS not supported on feature card .
2-338 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set m l s ag in gt ime Relat e d Commands clear mls s.
2-339 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set mls bridged-flow-statistics set mls bridged-f low-statistics T o enable o r disable sta tistics for bridged flo ws for specifi e d VLANs, u se the set mls bridged- flow-s tat istics command.
2-340 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set mls cef l oad -balan ce set mls cef load-bal ance T o in cl ude or exclu de L ayer 4 por ts in a loa d-b ala nc ing hash, us e the set m ls c ef loa d-balance comm an d.
2-341 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set mls cef per-prefix-statistics set mls cef per-prefix-statistics T o set MLS CEF per -prefix s tatistics mode, use the set m ls c ef per-pr efix statistics command .
2-342 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set mls excl ude prot oco l set mls exclude protoco l.
2-343 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set mls flow set mls flow T o specif y the minim um flo w mask used for MLS, use the set mls flow comman d.
2-344 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set m ls flow Exam ples Th ese examples show how to specify that only expired flows to subnet 171. 69.194.
2-345 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set m ls nd e set mls nde T o conf igure the NetFl.
2-346 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set m ls nde Defaults The def aults are N etflo w Data Export v ersion 7, and all expired flo ws are expo rted until the f ilter is specif ied explicitly .
2-347 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set m ls nd e Use th e foll ow ing s yntax to speci fy an IP subn et add ress: • ip_subnet _addr —T his i s the sho rt su bnet addr e ss form at.
2-348 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set m ls nde This e xample sho ws how to specify that.
2-349 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set mls rate set mls rate T o set the rate at which inde x-directed pac kets are sent to the MSFC, u se the set mls rate comman d.
2-350 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set mls sta ti st ic s protocol set mls statistics proto col T o add protocols to the protocols stat istics list, use the set mls stat isti cs protocol command.
2-351 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set mls verify set mls verify T o enabl e or disab le ch ecksu m or packet ch eckin g based on packe t lengt h, use the set mls verify comm and.
2-352 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set ml s verif y Exam ples This examp le sho ws ho w .
2-353 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set module set module T o en able or d isable a m odule, u se th e set module comm and. set m o du le en a ble | disable mod Syntax Descript ion Defaults The def ault is all module s are en abled.
2-354 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set modul e This exampl e shows ho w to disabl e module 2 when conne cted via a T elnet session: Console> (enable) set module disable 2 This command may disconnect your telnet session.
2-355 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set module na m e set module name T o set th e name for a module, use the set module name command.
2-356 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set modul e po wer set module power T o turn the po wer on or of f to a module, use the set module power comm and.
2-357 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set module shutdown set module shutdown T o shut down the N AM and Intrusion Dete ction Syste m Module (I DSM), use the set mo dule shutdown comm and.
2-358 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set msfcaut ostate set msfcautostate T o enab le or d.
2-359 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set msfcautostate Relat e d Commands show msfcauto.
2-360 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set msmautos tate set msmautost ate T o en able or disa ble th e line p rotocol st ate de termina tion of t he MSMs due to port st ate ch ange s, use the set msmautostate command .
2-361 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set multicast router set multicast router T o conf igure a port man ually as a multi cast router por t, use the set mult icast router command.
2-362 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set ntp broad castc li ent set ntp broadcastc lient T o ena ble o r disab le NTP i n broa dc ast- cli ent mode , use t h e set ntp broadcastclient comman d.
2-363 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set ntp b roadcastde lay set ntp broadcastd elay T.
2-364 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set ntp cli ent set ntp client T o enable or disabl e a Catalyst 6500 ser ies switch as an NTP client, use the set ntp client command.
2-365 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set ntp server set ntp server T o s peci fy t he N T P server addr ess a nd co nfigure an N TP se rver auth en tica tio n key , us e the set ntp server command.
2-366 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set nt p summert ime set ntp summertime T o set th e clock ahead one hou r durin g dayli ght saving time, us e the set ntp summertime command.
2-367 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set ntp sum mertime Exam ples Th is exampl e shows.
2-368 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set ntp time zone set ntp timezone T o conf igure the time offs et from G re en wi ch M e an Ti me , use the set ntp timezone comm and.
2-369 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set password set password T o chan ge the lo gin p assw ord on the CLI, us e the set password comman d.
2-370 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set pb f set pbf T o enable po licy - based for warding (P BF) and to set a MA C address for th e PFC2, use th e set pbf comm and.
2-371 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set pbf Relat e d Commands clear pbf show pbf.
2-372 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set p bf- m ap set pbf-map T o create security A CLs and to set adjace ncy inform ation, use the set pbf-m ap comman d.
2-373 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set pbf-map If you wan t to add entries other then redirect A CEs to the adjacenc y table, use the set security acl ip PBF_M AP_A CL_(VLA N_ID ) command.
2-374 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set port arp-i nspec tion set port arp-ins pection T o set Addre ss Recogni tion Protocol (ARP) inspec tion thre sholds on a per-port basis, use the set por t arp-inspection comman d.
Chapter 2 Catalyst 6 500 Series Swi tch and ROM M onitor Commands set port auxiliaryvlan 2-375 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 2 set port auxiliaryv lan T o conf ig ure the auxiliary VLA N ports, use the set port auxiliaryvlan comman d.
2-376 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set port auxi liaryv lan Exam ples This example shows.
2-377 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set po rt br oa dca s t set port broadca st T o set broadcast, multica st, or unicast suppres sion for one or more ports, use the set port broadcast command.
2-378 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set port b roa dcast Exam ples This example sho ws how to limit broadcast tra ff ic to 20 percent: Console> (enable) set port broadcast 4/3 20% Port 4/3 broadcast traffic limited to 20.
2-379 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set port c hannel set port channel T o con figure E the rCh ann el on E ther ne t m odule p orts, u se the set port channel comm and.
2-380 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set port chan nel Defaults The def ault is EtherChann el is set to auto and silent on all module ports. The de faults for fra me distribution ar e ip and both .
2-381 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set port c hannel Exam ples Th is ex ampl e sh ows.
2-382 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set port cops set port cops T o create port role s, use the set port cops command. set port cops mod / port rol e s ro l e 1 [ ro l e 2 ].
2-383 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set po rt de bo unc e set port debounce T o enabl e or disab le the de bounce t imer or co nfigure the time r setting on a per-port basis , use the set port debounce command.
2-384 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set port debo unce For 10/100 ports a nd 100BASE-FX p.
2-385 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set port disable set port disable T o disa ble a port or a ra nge of por ts, use the set port disable comm and.
2-386 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set port dot 1q-all-tagg ed set port dot1q-all-tagged T o enable the 802. 1Q tagging feature o n specif ic ports, use the set port dot1q-all-tagge d comma nd.
2-387 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set port dot1q-all-tagged Relat e d Commands set d.
2-388 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set port dot 1qtunnel set port dot1qtunne l T o con figure th e dot1q t un nel mo de f or the po rt, use th e set po rt dot1qtunnel command.
2-389 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set po rt dot1 qtu nn el This examp le shows the o.
2-390 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set port dot1 x set port dot1x T o conf igure do t1x on a po rt, u se the set port dot1x comman d.
2-391 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set po rt dot1 x Comma nd T ypes Sw itch co mman d.
2-392 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set port dot1 x This e xample sho ws how to enable automat ic reauthentica tion on a p ort: Console> (enable) set port dot1x 4/1 re-authentication enable Port 4/1 re-authentication enabled.
2-393 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set port duplex set port duplex T o configu re the dup lex type of a n Ethe rn et p ort o r a rang e o f p ort s, use the set port duplex comm and.
2-394 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set p ort enab le set port enable T o enab le a port or a ra nge of p orts, use the set port enable command .
2-395 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set por t errdi sable-t imeout set port errdisable-timeout T o prevent an er rdisabl ed port fr om being en ab led, use t he set port e rrdisable -timeout command.
2-396 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set port flowcont rol set port flowcontrol T o co nf igure a port to se nd or rec eiv e pau se fram es, use the set port fl owcontr ol comman d.
2-397 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set port flowcontrol Ta b l e 2 - 1 5 describes guidelines for dif ferent conf igurations of the send and re c e ive ke ywords .
2-398 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set port gmrp set port gmrp T o enable or disable GMRP on the specified ports in all VLANs, use the set port gmrp command .
2-399 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set port g vrp set port gvrp T o enab le or disa ble GVRP o n the specif ied port s in all VLANs, use the set port gvrp comm and.
2-400 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set port gvrp This examp le shows what happens if you.
2-401 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set po rt host set port host T o optimize the port conf iguration for a host conn ection, use the set port host com mand.
2-402 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set por t inli n epower set port inlinepower T o s et the i nli ne power mo de of a po rt or group of p orts, u se th e set port inline power command .
2-403 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set port jumbo set port jumbo T o enab le or dis able the jumb o fra me fea ture on a pe r-port ba sis, us e the set port jumbo co mman d.
2-404 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set port l2 prot ocol-tun nel set port l2protoco l-tunnel T o set La yer 2 proto col tunnel ing para meters, use the set port l2protocol-tunnel command .
2-405 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set port l2protoc ol-tunnel • 20 Layer 2 pro toc.
2-406 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set port lacp-cha nnel set port lacp-channe l T o set.
2-407 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set p ort lacp -channel • Y ou ca n assig n a ma ximu m o f 8 port s to a n a dmini str ative key .
2-408 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set port m acro set port macro T o execute a co nfiguration ma cro on a per-port basis, us e the set port macr o comma nd.
2-409 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set port macro Exam ples This exampl e sho ws ho w.
2-410 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set port m acro VLAN Mod/Ports ---- ----------------------- 32 3/1 16/1 Port 3/1 will not send out CDP packets with AuxiliaryVlan information.
2-411 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set port membership set port membership T o set t h e VLAN membership assignmen t to a port, u se the set port membership command.
2-412 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set port member ship Relat e d Commands set pvlan set.
2-413 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set port name set port name T o co nf igure a name for a port, use th e set port name comman d.
2-414 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set p ort nego tia t ion set port negotiatio n T o enabl e or disab le the l ink negotiat ion prot ocol on th e specified port , use th e set port negotiation comm an d.
2-415 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set por t protocol set port protocol T o enab le or dis able prot ocol member ship of por ts, u se the se t port protocol comm an d.
2-416 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set port prot ocol Relat e d Commands show port proto.
2-417 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set po rt qo s set port qos T o specify wheth er an interface is interpreted as a physica l port or as a VLAN, use the set port qos comm and.
2-418 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set port qos This e xample sho ws the outp ut if you .
2-419 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set por t qos auto qos set port qos autoqos T o appl y the auto matic Qo S feature on a pe r-port basis, use the set port qo s autoqos command.
2-420 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set por t qo s au toqos Relat e d Commands set qos a .
2-421 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set port qos cos set port qos cos To set th e def ault val u e for all pa c kets th at hav e arri ve d throug h an un truste d p ort, use the set port qo s cos command.
2-422 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set p ort qos policy -source set port qos policy-source T o set the QoS policy source for all ports in the specif ied module, use the set port qos polic y-source comm and.
2-423 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set port qos poli cy-source This e x ample sho ws .
2-424 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set por t qo s tr ust set port qos trust T o set the .
2-425 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set port qos t rust Relat e d Commands set port qo.
2-426 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set p ort qos trust -device set port qos trust-device T o co nfigure the t ru st mode on a por t on a spe cific device or modu le, us e t he set port qos trust-de vice comm and.
2-427 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set port q os trust-ext set port qos trust-ext T o conf igure the a ccess port on a Cisco I P phone conn ected to the s witch por t, use the set port qos trust- ext com mand .
2-428 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set port rsv p ds bm-ele ction set port rsvp dsbm-ele.
2-429 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set port security set port security T o con figure p or t se cur it y o n a por t or r ange of po rts, use th e set p o rt se cu ri ty command .
2-430 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set po rt secur ity • Shutdown time is indefinite. • T imer type is set to absolute aging. • Unicast floodi ng is enabled.
2-431 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set port security This e x ample sho ws how to set.
2-432 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set po rt speed set port speed T o conf igure the sp eed of a port interf ace, use the set port speed command.
2-433 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set port sync-restart-delay set port sync-restart-del ay T o s pecify the s ynchr oni zati on re sta rt d ela y of a por t, use t he s et port sync- res tart-dela y com mand .
2-434 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set po rt trap set port trap T o enab l e or disab le.
2-435 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set port unicast -flood set port unicast-fl ood T o configure t he swit ch to drop Unicast Flood traffic on an Ether net port, use the set po rt unicast-flood comm and.
2-436 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set p ort uni c a s t- fl ood This exam ple sh ows ho.
2-437 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set port vo ice inter face dh cp set port voice interface dhcp T o set t he port v oice interf ace for the DHCP , TFTP , and D NS server s, use the set po rt voi ce in t er fa ce dhcp comma nd.
2-438 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set port voi ce i nterface dhcp Exam ples This exampl.
2-439 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set power r edundancy set power redundan cy T o tu rn redun da ncy betw een the p ower suppl ies on or o ff, use the set power r edundancy command.
2-440 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set prompt set prompt T o change the prompt for the CLI, use the set prompt com mand. set prompt pr ompt_ stri ng Syntax D escr i pti on Defaults The de fault is the prom pt is set to Console >.
2-441 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set protocolfilt er set protocol filter T o acti v.
2-442 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set pv lan set pvlan T o bind the iso lated or communit y VLAN to the prim ary VLAN and assign the is olated or community ports to the pri vat e VLAN, use the set pvlan comma nd .
2-443 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set pvlan Exam ples Th is example shows ho w to ma.
2-444 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set pvlan ma pping set pvlan mapping T o map isolated or commun ity VLANs to the primary VL AN on the promiscuous port, use the set pvlan mapping comm an d.
2-445 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set pvla n mapping Relat e d Commands clear pvlan .
2-446 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set qo s set qos T o turn o n or turn of f QoS functionality o n the swi tch, use the set qos command .
2-447 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set qos acl default-action set qos acl defau lt-action T o set t he ACL default actions, use the set qos acl default-action command.
2-448 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set q os a c l d efa ult- a cti on This exampl e show.
2-449 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set qos acl ip set qos acl ip T o cre ate or add IP a ccess lists , use th e set qos acl ip comm and.
2-450 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set qo s acl ip Defaults The def ault is there ar e no A CLs. Comma nd T ypes Sw itch co mman d. Command Mode s Pri vile ged.
2-451 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set qos acl ip The optio nal micr oflow micr ofl ow _na me an d aggrega te aggr egate_name key word s and v ariables ar e used to c o nf igure polici ng i n the A CE.
2-452 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set qo s acl ip If the oper ator is positione d after the source a nd source- wildcard, it must match the so urce port.
2-453 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set qos acl ip This example shows ho w to de fine an ICMP access li st: Console> (enable) set qos acl ip icmp_acl trust-dscp my-micro icmp 1.
2-454 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set qo s acl ipx set qos acl ipx T o defin e IPX access lists, use the set qos acl ipx command.
2-455 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set qos acl ipx The optio nal aggregate aggr e ga te_nam e keyword and variable ar e used to configure polici ng in the A CE.
2-456 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set qo s acl ipx Exam ples Th is exam pl e s h ows how to cr ea t e an I P X A CE: Console> (enable) set qos acl ipx my_IPXacl trust-cos aggregate my-agg -1 my_IPXacl editbuffer modified.
2-457 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set qos acl mac set qos acl mac T o define MAC access lists, use th e se t qos acl mac comman d.
2-458 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set qo s acl mac • Case sensiti ve • Cannot be a .
2-459 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set qos acl map set qos acl map T o atta ch an A CL to a specified port or VLAN, us e the set qos acl map comman d.
2-460 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set qo s acl map Relat e d Commands clea r qos acl co.
2-461 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set qos autoqos set qos autoqos T o apply automat ic QoS settings to all ports on the switch , use the set qos autoqos command.
2-462 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set q os b r id ged -m ic rof low- pol icin g set qos.
2-463 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set qos cos- dscp-map set qos cos-dsc p-map To set the CoS-to-DSCP mapping, use th e set qos cos-dscp-ma p command.
2-464 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set qos drop- thres hol d set qos drop-threshold T o p rogram t he tr ansmi t-queu e an d rece iv e -que ue drop threshol ds on all p orts in the system, use th e set qos drop-thr eshold command.
2-465 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set qos drop- threshold The number pr eceding the q letter in the port type dete rmines the number of t he queues that the har dware supports.
2-466 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set qos ds cp-cos- map set qos dscp-c os-map To set the DSCP-to-CoS mapping, use the set qos dscp-cos-map command .
2-467 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set qo s ipp rec -d sc p- ma p set qos ipprec -dscp-map T o set t he IP prece denc e-to-DSCP map, u se th e set qos ipprec-dscp-map comm and.
2-468 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set qos ip prec -ds cp-map Exam ples Th is exampl e s.
2-469 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set qos mac-cos set qos mac-c os T o set the Co S value to the M A C addre ss an d VLAN pa ir, use the set qos mac-cos co mman d.
2-470 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set qo s map set qos map T o map a specif ic CoS value to the transmit- or r ecei ve-pri ority queues an d the thresholds per a vail able priority queue for all ports , use the set qos map comma nd.
2-471 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set qos map Comma nd T ypes Sw itch co mman d.
2-472 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set qo s map This example shows ho w to ma p the CoS .
2-473 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set qo s p olic ed-d s cp- map set qos policed -dscp-map T o set the m apping of p oliced in -profile DSCPs , use the set qos policed-dscp-map command.
2-474 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set qo s polic er set qos policer T o c rea t e a po li ci ng rule f or ACL, us e t he set qos policer co mman d.
2-475 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set qos policer When b oth n ormal a nd exce ss rate s are zero, you c an spec ify an y bur st size.
2-476 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set qo s polic er Relat e d Commands clear qos po lic.
2-477 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set qo s policy-s ource set qos policy-source T o set t he QoS polic y source, use th e set qos policy-source com mand.
2-478 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set qos po lic y-sou rce This example shows the outpu.
2-479 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set qos rsvp set qos rsvp T o turn on or turn of f.
2-480 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set qo s rsvp This e x ample sho ws how to set t he polic y timeout interv al: Console> (enable) set qos rsvp policy-timeout 45 RSVP database policy timeout set to 45 minutes.
2-481 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set qos rxq- ratio set qos rxq-ratio T o set the a.
2-482 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set qos rxq-ra tio Exam ples This e xample s ho ws ho w to set t h e rece ive-queue s ize rati o: Console> (enable) set qos rxq-ratio 1p1q0t 80 20 QoS rxq-ratio is set successfully.
2-483 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set qos statistics export set qos statistics ex port T o globally enable or disable statistics dat a gathering from hardw a re, use the set qos statistics export comm and.
2-484 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set qos sta ti st ic s expor t agg regate set qos sta.
2-485 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set qos statistics export destinat ion set qos statistics ex port destinatio n T o specify the statisti cs data export dest ination address, use the set qos statistics export destination comm and.
2-486 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set q os sta ti st ics e x por t in te rva l set qos .
2-487 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set qos stati stics export port set qos statistics ex port port T o enable or disa ble statist ics data expor t on a por t, u s e t h e set qos statis tics ex port po rt comm and.
2-488 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set qo s txq -rati o set qos txq-ratio T o set the amount of pack et b uf fer memory allo cated to high -priority tra f f ic and lo w-priority traf fic, use the set qos txq-ra tio comma nd.
2-489 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set qos txq-ratio Exam ples Th is e xample shows ho w to set the transmit-queue size ratio: Console> (enable) set qos txq-ratio 2q2t 75 25 QoS txq-ratio is set successfully.
2-490 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set qo s wred set qos wred T o configure th e WRED thr eshold para meter s for the specified por t type, use th e set qos wred comm an d.
2-491 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set qos wred Console> (enable) Relat e d Comman.
2-492 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set qo s wrr set qos wrr To specify the weights th at d etermine ho w many pa ckets will transmit out of one queue before switchin g to the othe r queue, use the set qos wr r comm and.
2-493 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set qos wrr Exam ples Th is example shows how to specify the weights for queue 1 and queue 2 to 30 and 70: Console> (enable) set qos wrr 2q2t 30 70 QoS wrr ratio is set successfully.
2-494 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set radius attribute set radius attribute T o set attrib utes to the RADIUS A CCESS_REQUEST pack et, use the set radius attribute comman d.
2-495 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set radi us deadti me set radius dea dtime T o set the time to skip RADIUS serv er s that do not re ply to an au thentic ation request , use the set radius deadtime comman d.
2-496 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set radius key set radius key T o set the encryptio n and authenticatio n for all communi cation betwee n the RADIUS client an d the serv er , use th e set radius key comma nd.
2-497 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set ra dius retrans m it set radius retransmit T o speci fy the numbe r of tim es the RADI US servers are tr ie d be fore giving up on the server , use the set radius retransmit com mand.
2-498 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set radius server set radius server T o set up the RA DIU S server, use the set radius ser ver command.
2-499 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set ra dius time out set radius timeout T o set the time between retransm issions to the RADIUS server , use the set radius t imeout comman d.
2-500 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set rcp usern ame set rcp username To sp eci fy you r userna m e for r cp f ile tr ans fers, us e th e s et rcp usern ame command.
Chapter 2 Catalyst 6 500 Series Swi tch and ROM M onitor Commands set r gmp 2-501 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 22 set rgmp T o enab le or dis able the Route r-Por ts Group Ma nageme nt Protoco l (RGMP) fe ature on the swit ch, use the set r gmp command.
2-502 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set rspan set rspan T o create re mote Switched Port An alyzer ( SP AN) sessions, us e th e set rspan comm and.
2-503 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set r s pan Defaults The de faults are as fo llows: • Remote SP AN is disabled. • No VLAN f ilterin g.
2-504 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set rspan Exam ples Th is exampl e sh ows how to disab le al l en able d sour ce s ession s: Console> (enable) set rspan disable source all This command will disable all remote span source session(s).
2-505 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set secur ity acl adj acency set security acl adjac ency T o set an entry fo r th e adjac ency ta ble, us e the set securi ty acl adja cency command.
2-506 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set sec urity a cl a rp-inspec tion set security acl arp -inspecti on T o configure Ad dress Reso lution Proto col (ARP) inspection fe ature s, use the set secur ity acl arp-inspection comman d.
2-507 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set security acl arp-inspection Use the set se curity acl arp-inspectio n command in conjun ction w ith the set security acl ip arp-inspection command .
2-508 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set sec urity a cl c apture-por ts set security acl c.
2-509 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set security acl feature ratelimit set security ac.
2-510 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set secu r it y acl ip set security acl ip T o c reate a n ew en try i n a stan dard IP VA CL a nd ap pend th e ne w en try at th e end of t he VA CL, u se the set security a cl ip command .
2-511 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set security acl ip bef ore editbu ffer_ index (Optional ) Inserts the ne w A CE in front of an other ACE.
2-512 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set secu r it y acl ip Defaults Ther e are no def ault ACLs an d no defa ult ACL-V LAN ma ppings. By de fault, AR P is enabled.
2-513 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set security acl ip • Use the ke yword any as an abbrev iation for a sour ce and sou r ce-wil dcar d of 0.
2-514 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set secu r it y acl ip For IP , you ca n enter the fo.
2-515 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set security acl ip Relat e d Commands clea r secu.
2-516 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set secu r it y acl ipx set security acl ipx T o crea te a new entry in a stan dard I PX V A CL an d to appe nd the n ew entry a t the e nd of the V A CL , use the set security acl ipx command .
2-517 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set security acl ipx If you use the capture keyword, the ports that captu re the traf fic and t ransmit out are spe cified by ent erin g th e set se c uri t y a cl ca ptu r e-p or ts co mmand .
2-518 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set secu r it y acl ipx Exam ples Th is exampl e sh ows how to bloc k tr aff ic f rom a specified sou rc e IPX addre ss: Console> (enable) set security acl ipx IPXACL1 deny 1.
2-519 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set security acl log set security acl log T o c on figure th e sec ur i ty ACL log tab l e, us e th e set secur ity acl log comman d.
2-520 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set secu r i t y acl mac set security acl mac T o cre.
2-521 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set security acl mac • Cannot be a num be r • .
2-522 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set secu r i t y acl map set security acl map T o map an exi sting V A CL to a VLAN, use the set security ac l map comm and.
2-523 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set security acl map This e xampl e sho ws the out.
2-524 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set sn mp set snmp T o enable or disable the processing of SNMP requests to the switch and SNMP traps from the switch, use the set snmp comm and.
2-525 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set snmp access set snmp access T o d efine th e ac c ess ri ght s of an SN MP group , u se the se t snmp access command .
2-526 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set sn mp acc e ss • write write view is NULL OI D. • notify notifyvie w is NULL OID. • cont ext contextname is a NULL string.
2-527 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set snmp ac cess-list set snmp access-list T o specify an access lis t number fo r a host or group of host s, use the set snmp ac cess-list command.
2-528 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set sn mp acc e ss-list Relat e d Commands clear sn m.
2-529 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s se t s nm p b u ffe r set snmp buffer T o set t h e siz e of the SNM P UDP so cket recei ve b uff er , use the set snm p buffer command.
2-530 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set sn mp cha ssis-a lias set snmp chassis-alias T o set t he chassis al ias and sav e it in NVRAM and in the c onfi g uration f ile, use the set snmp chassis-alias command.
2-531 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set snmp comm unity set snmp community T o set SNMP comm unities and associat ed access type s, use the set snmp community command.
2-532 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set snmp communi ty There are three co nf igurab le SNMP communi ties, one fo r each acce ss type.
2-533 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set snmp com munity-ext set snmp community-ext T o set a dditional c o mmunity str ings, use the set snmp community-ext command.
2-534 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set snmp community-ext This e xample sho ws how to ch.
2-535 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set snmp e xten ded rmon n etflow set snmp exten dedrmon netfl ow T o enable or disabl e the SNMP extend ed RMON support for t he N AM module , use the set snmp extendedrmon netflow com mand.
2-536 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set sn mp group set snmp group T o establi sh the relations hip bet ween an SNMP g rou p and a us e r with a s p ecif ic security mo d el, use th e set snmp group command.
2-537 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set snmp ifalias set snmp ifalias T o set t he SNMP inte r face alias, us e the set snmp ifalias co mman d.
2-538 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set sn mp noti fy set snmp notify T o set the notifyname entry in the snmpNotifyT able and the notifytag entry in the snmpT argetAddrT able, use the set snmp notify command.
2-539 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set s nmp rm on set snmp rmon T o ena ble or disab le SNMP RM ON support, use the se t snmp rmon comma nd.
2-540 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set snmp rm onm e mory set snmp rmonme mory T o set t he memory usage limit in pe rcentage, use th e set snmp rmonmemory command .
2-541 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set snmp targetad dr set snmp t argetadd r T o conf igure the SNMP tar get address entr ies in the snmpT arg etAddres sT able, use th e set snmp targetaddr co mmand .
2-542 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set snmp targ etadd r Usage Guid el i nes If you us e.
2-543 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set sn mp targetp arams set snmp targ etparams T o.
2-544 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set snmp targ etpara ms Usage Guid el i nes If you us.
2-545 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set snmp trap set snmp trap T o enable or disable t he diffe rent SNMP traps on the system or to add an entry into the SNMP authenti cation trap recei ver ta ble, use the set sn mp tr ap command.
2-546 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set sn mp tra p Defaults The def ault is SNMP traps are disabled. Comma nd T ypes Sw itch co mman d. Command Mode s Pri vile ged.
2-547 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set snmp trap Console> (enable) Relat e d Comma.
2-548 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set sn mp user set snmp user T o conf igure a ne w SNMP user , us e the se t snmp user co mmand .
2-549 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set snmp user This e xample shows how to se t a sp.
2-550 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set sn mp view set snmp view T o co nf igure the SNMP M IB vie w , us e the set snmp view command.
2-551 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set snmp view Exam ples Th is exampl e sh ows how to assign a su bt ree to the view pu blic: Console> (enable) set snmp view public 1.
2-552 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set sp an set span T o enable or disable SP AN and to set up the switch por t and VLAN analyzer for mu ltiple SP AN sessions, use the set span command.
2-553 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set span Usage Guid el i nes After y ou en ab le SP AN , syst em defa ult s a re u sed i f no pa rame ter s w ere ever set.
2-554 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set sp an This example shows how to disable SP AN if multi ple SP AN sessio ns are not defined: Console> (enable) set span disable This command WILL disable your span session(s).
2-555 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set spant ree backb onefast set spantree backbone fast T o en able or disa ble t he span ning tree B ackbo neF ast C on ver gence feat ure, use the set s pan tree backbonefast comman d.
2-556 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set spantr ee bpdu-f il t er set spantree bpdu-filter T o enable or disable BPDU packet f ilter ing on a por t, use the set spantre e bpdu-f ilter command.
2-557 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set spant ree bpdu- guard set spantree bpdu-guard T o ena ble or di sabl e spanning tree BPDU g uard on a port, us e the set spantree bpdu-guard co mman d.
2-558 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set spantr ee bpdu-s ke wing set spantree bpdu-skewin g T o en able or disa ble col lection of t h e sp anning tree BPDU sk ewi ng detect ion statist ics, u se the set spantree bpdu-skew ing command.
2-559 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set s pan tre e cha nne lco st set spantree channelco st T o set t he channel p ath cost and to auto matically a djust the cha nnel port costs, use the set spantree channelcost command .
2-560 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set spantr ee chann elcost Relat e d Commands clear l.
2-561 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set spantree c hannelvlanc ost set spantree channe.
2-562 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set spantr ee defau lt cos tmode set spantree defaultcostmode T o s peci fy t he s pan ning tre e defau lt por t c ost m ode, us e the se t spa ntree de fault co stmode com mand .
2-563 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set spantree defaultcostmode Exam ples Th is examp.
2-564 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set spa ntree disa ble set spantree disable T o disabl e the spanni ng tree alg orithm for all VLANs or a specif ic VLAN or dis able span ning tre e inst an ce , us e th e set spa ntree disable command.
2-565 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set spant ree disable This e x ample sho ws how to disable span ning tree fo r a specif ic instance: Console> (enable) set spantree disable mistp-instance 2 MI-STP instance 2 disabled.
2-566 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set spantr ee enabl e set spantree enabl e T o enable th e spanning tree alg orithm for all VLANs, a specif ic VLAN, a specif ic instance, or all inst an ce s, us e th e set spantr ee enable command.
2-567 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set spantr ee enable Relat e d Commands set spantr.
2-568 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set spantr ee fwddel ay set spantree fwddelay T o set the bridge for ward delay for a VLAN or an instance, use the set spantre e fwddelay command.
2-569 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set spantree fwddelay This e xample shows ho w to .
2-570 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set spantr ee globa l-d efault set spantree globa l-default T o s et the gl ob al s tat es on the sw it ch, use th e set spa ntree globa l-def ault command.
2-571 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set spantr ee global -default This exampl e shows .
2-572 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set spantr ee guard set spantree guard T o enabl e or disab le the spa nning tr ee root gua rd or loop gua rd feat ure on a per-port basis, use t he set spantree guar d command.
2-573 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set spantree guard Exam ples Th is exampl e sh ows how to en abl e r oot gua rd : Console> (enable) set spantree guard root 5/1 Rootguard on port 5/1 is enabled.
2-574 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set s pan tr ee h e llo set spantree hello T o set the bridge hello time for a VLAN or an instance, use the set spantree hello command .
2-575 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set spantree hello This example sho ws how to set .
2-576 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set s pan tr ee li nk - ty pe set spantree link-type T o conf ig ure the link type of a port , use the set spantr ee link-type command .
2-577 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set spantr ee macreducti on set spantree macreduction T o enab le or disa ble the sp anning tree MA C addr ess redu ction feature , use the set spantre e macr educti on comman d.
2-578 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set spantr ee maxage set spantree maxage T o set the bridge max imum aging time for a VLAN or an instan ce, use the set spantree maxage comm and.
2-579 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set spantree maxa ge This exampl e shows ho w to s.
2-580 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set sp antree m ode set spantree mode T o configure the type of Sp anning T ree Proto col mode to run, use the set spantree mode comman d.
2-581 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set spant ree mo de If yo u ch a n g e the sp ann .
2-582 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set sp antree mst set spantree mst T o conf ig ure the mapping of VLANs to an MST instance , use the set spantree mst command .
2-583 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set spantree mst config set spantree mst config T o change the MST region informatio n, use the set spantree mst config co mmand.
2-584 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set spantr ee mst co nfi g Exam ples Th is example sh.
2-585 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set spantree mst link-type set spantree mst link-type T o conf ig ure the link type of a port , use the set spantree mst link-type co mmand .
2-586 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set spantr ee mst max hops set spantree mst maxhops T o s et th e spa nnin g tr ee h op co unt , us e th e set spantree mst ma xhops co mman d.
2-587 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s se t sp a nt r ee ms t vl a n set spantree mst vlan T o conf ig ure the mapping of VLANs to an MST instance , use the set spantree mst v lan command.
2-588 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set sp antree p ortco st set spant ree port cost T o set the path cost for a por t, use the set span tree port cos t comma nd.
2-589 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set sp ant ree po rt cost Comma nd T ypes Sw itch co mman d.
2-590 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set sp antre e port fast set spantree port fast T o allo w a port that is connected to a single workstatio n or PC to start faster when it is connec ted, use the set spantree portfast command.
2-591 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set spantree portfast This exam ple sh ows how to .
2-592 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set spantr ee portfas t bpdu-fi lt er set spantree po.
2-593 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set span tree portfa st bpdu-guard set spantree portfast bp du-guard T o ena ble o r di sab le spanni ng t ree Po rtFast BPDU guard o n a por t, u se the se t spantree portfas t bpdu-guard comman d.
2-594 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set spantr ee portins tancecos t set spantree port instanceco st T o assign the pa th cost of t he port for the sp ecified in stances , use the set spantre e portinstanceco st comm and.
2-595 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set spant ree porti n stancecost Exam ples Th ese .
2-596 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set spantr ee portins tancepri set spantree portinstan cepri T o set the p ort prior ity for inst ances in th e trunk port, use the set spantree portinstancepri comman d.
2-597 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set spantree portinstancepri This exampl e shows h.
2-598 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set spantr ee portp ri set spant ree port pri T o s et the brid ge pr iori ty for a s pa nning t ree po rt, use t h e set spantree portpri command.
2-599 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set sp ant re e po rtv l an cos t set spantree port vlancost T o assign a lower path cost to a set of VLANs on a port , use the set spantree port vlancost command.
2-600 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set spa ntr ee portv la ncost Command Mode s Pri vile ged.
2-601 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set sp ant re e po rtv l an cos t Relat e d Comman.
2-602 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set spantr ee portvla npri set spantree portvlanpri T o set the p ort prior ity for a subset of VLANs in the tru nk port , use th e set spantree portvl anpri comm and.
2-603 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set spantree p ortvlanpri Relat e d Commands clear.
Chapter 2 Catalyst 6 500 Series Swi tch and ROM M onitor Commands set spantree priority 2-604 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 22 set spantree priority T o set the bri dge pri ority for a VLAN or an inst ance whe n PVST+ or MI STP is runnin g, use the set spantree priority command .
2-605 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set spantree priority This exam ple sh ows how to set the br idge pri orit y fo r M ST inst anc e 0: Console> (enable) set spantree priority 28672 mst 0 MST Spantree 0 bridge priority set to 28672.
2-606 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set sp antree r oot set spantree root T o set the primary o r secondar y root fo r specifi c VLANs, all VLANs of the switc h, or a n instance, u se the set spantree root command .
2-607 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set spantree root The set spa ntree root brid ge priorit y value is 16384, except when M A C re ducti on or MISTP are enabled, the n the valu e is 24576.
2-608 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set sp antree r oot These ex amples sho w that setting the b ridge priority to 819 2 was not suf fi cient to make th is switch the root.
2-609 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set spantree uplinkfast set spantree uplinkfast T o enab le fast switcho ver to alter nate ports when the root po rt f ails, use the set spantr ee uplinkfast command.
2-610 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set spantr ee uplinkf ast Y ou do no t have to turn o.
2-611 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set summertime set summertime T o spec i fy whet he r the sys tem s houl d set the clock ah ead o ne hou r du ring daylight saving t ime, us e the set summertime command.
2-612 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set su mmertim e Exam ples Th is exampl e shows how t.
2-613 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set system baud set system baud T o set th e console port ba ud rate, u se the set syst em baud comman d.
2-614 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set system con tact set system contact T o id en ti f y a co ntac t p er s on for t h e sys te m, us e th e set sy stem cont act co mmand .
2-615 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set system core- dump set system core-dump T o enable or disable t he core dump feature, use the set system core-dump comman d.
2-616 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set system cor e-file set system core-file To specify the cor e image filename, use t h e set s ys te m core- file comm and.
2-617 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set system countryco de set system countryco de T o s peci fy t he c ou ntry w here the syste m is physi ca lly loc ated, us e the set syste m countrycode comm and.
2-618 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set system cro ssbar -fa llback set system crossbar-fal lback T o selec t the ac tion tak en when the Switch Fabr ic Module fails, u se the set syst em crossbar -fallbac k comm and.
2-619 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set system highava ilability set system highavailability T o enable or disable h igh system a vai lability for the switc h , us e the set system highav ailability comm an d.
2-620 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set syst em higha vailabi lity ve rsi oning set syste.
2-621 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set system highavailability versioning Exam ples T.
2-622 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set sy stem locati on set system location T o identify the location of the system, use the set sy stem l oca tion command.
2-623 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set s yst em m o dem set system modem T o enable or disable mo dem cont rol lines on the consol e port, use the set system modem comman d.
2-624 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set sy stem name set system name T o conf igure a name for the system, us e the set system name command.
2-625 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set system super visor-upd ate set system supervisor-update T o con figure t he Er asa ble Progr am mabl e L ogic Device (E PLD) upg rade p roce ss, use the set syst em supervisor -update comma nd.
2-626 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set syst em su per viso r-updat e This exam ple sh ows how to disab le EPL D up gra des : Console> (enable) set system supervisor-update disable Supervisor EPLD update during reset is disabled.
2-627 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set system switchmode allow set system switchmode allow T o conf igure the switch ing mode fo r the system, use the set system switchmode allow command.
2-628 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set sy stem switch mode a llo w This example sho ws how to set the switching mode to bu s-only: Console> (enable) set system switchmode allow bus-only System switchmode allow set to bus-only.
2-629 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set system syslog-dump set system syslog-dump T o write system messag es in the syslog bu ffer to a flash f ile before the system fail s, use the set system syslog-dump co mmand.
2-630 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set sy stem s yslog-f ile set system syslog-file T o specify the f lash devi ce and f ile name for the syslo g dump when the system fa ils, use the set system syslog-file comm and.
2-631 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set tacacs attempts set tacacs attempts T o configure t he m aximum number of login a ttempt s allowed to the T A CA CS+ server , use t he set taca cs attemp ts com mand .
2-632 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set taca cs directedre quest set tacacs directed request T o en able or disa ble t he T A CAC S+ di rected- r eques t opt ion, u se the set tacacs dir ectedrequest comman d.
2-633 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set tacacs key set tacacs key T o set the ke y for T A CA CS+ authentication and enc ryption, use the set taca cs ke y co mmand.
2-634 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set tacacs server set tacacs serv er T o de fin e a T ACA CS+ s erv er , use th e set t aca cs se rver co mman d.
2-635 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s s et tacacs timeout set tacacs time out T o set t he response tim eout inte rval for the T A CA CS+ serv er daemon, use th e set tacacs tim eout command.
2-636 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set test diagf ail-act ion set test diagfail-action T o set t he action th at the supervisor en gine tak es when a diagnos tics test f ails, u se the set tes t diagfail-ac tion command.
2-637 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set test d iaglevel set test diaglevel T o s et th e di agnos tic level, us e t he set te st diaglevel co mman d.
2-638 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set ti me set time T o change the time of day on the system clo ck, use the set time comman d.
2-639 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s se t tim ez on e set timezone T o set the time zone for the system, use the set timezo ne com mand.
2-640 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set traffic m on itor set traffic monitor T o conf igure the thr eshold at which a hig h-traf fic log will be g enerated, u se the set traffic monitor comm and.
2-641 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set trunk set trunk T o conf ig ure trunk ports and to add VLANs to the allo wed VLAN list for exis ting trunks, use the set trunk comm and.
2-642 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set trunk The fo llo wing usage guidel ines apply whe.
2-643 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set trunk Relat e d Commands clear tr unk set vtp .
Chapter 2 Catalyst 6 500 Series Swi tch and ROM M onitor Commands set udld 2-644 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 22 set udld T o enab le or dis able the UDLD i nform ation displ ay on s pecif ied por ts or gl oball y on al l port s, use t he set udld command.
2-645 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set udld This exam ple sh ows how to disab l e the UD LD m es sag e displ ay f or po rt 1 o n m odu le 2: Console> (enable) set udld disable 2/1 UDLD disabled on port 2/1.
2-646 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set udld aggres si ve-mod e set udld aggressive-mo de T o enable or disable the UDLD aggr essi ve mode on sp ecified port s , use the set udld aggr essive-mode comm and.
2-647 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set udld interval set udld interval T o set t he UDLD message inte rva l timer , use the set udld inter val com mand.
2-648 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set vl an set vlan T o group p orts int o a VLAN, set t he priv ate VL AN type, map or un map VLAN s to or f rom an in sta nc e, specify a n 802.
2-649 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set v lan Defaults The de fault values ar e as follows: • Switche d Ethern et ports and Ether net repe ater por ts are in VLA N 1.
2-650 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set vl an If you spe cify a r an ge of V LA Ns, y ou cann ot u se the VLAN name .
2-651 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set v lan Exam ples Th is example shows how to set VLAN 850 to incl ude ports 3 throu gh 7 on modul e 3: Console> (enable) set vlan 850 3/3-7 VLAN 850 modified.
2-652 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set vl an mappi n g set vlan mapping T o map r eserved VLANs to n onreserved VL ANs or map 8 02.1Q V LANs to ISL VLANs, use t he set vlan mapping comm and.
2-653 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set vlan mapping If the table is full, the command is aborted wit h an error message indica ting the table is full.
2-654 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set vmps dow nloa dm et hod set vmps down loadmeth od T o spec ify whether to use TFTP or rcp t o do wnl oad the VM PS dat abase, use the set vmps downloadmethod comman d.
2-655 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set vmps downl oadserver set vmps downloadserver T o spec if y the IP ad dress of t h e T FTP or rc p server from wh ich the V MPS databa se is download ed , use the set vmps downloadserver com mand.
2-656 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set vm ps ser ver set vmps server T o conf ig ure the VMPS, use the set vmps server command .
2-657 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set vmps server This example shows how to define a secondary VMPS: Console> (enable) set vmps server 192.
2-658 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set vmps state set vmps state T o enable or disable VMPS, use the set vmps state co mman d. set vmps st ate { enable | disable } Syntax D escr i pti on Defaults By defau lt, VMPS is di sabled.
2-659 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set vtp set vtp T o set t he options for VTP , use the se t vtp command.
2-660 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands set vt p If the re cei ving switch is in se rve r mode, the co nf igurati o n is not changed .
2-661 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s set vtp pruneeligible set vtp pruneeligib le T o specify which VTP dom ain VLANs are pruning elig ible, use the set vtp pruneeligible com mand.
Chapter 2 Catalyst 6 500 Series Swi tch and ROM M onitor Commands sh ow accou nting 2-662 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 22 show accou nting T o di splay ac counti ng setup and con figuratio n infor mati on on t he sw itch , us e the show ac counti ng comm and.
2-663 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show acc oun ting Overall Accounting Traffic: Star.
2-664 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show ac coun ting Relat e d Commands set accounting c.
2-665 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show acllog show acllog T o display the status of A CL log ra te limitin g, use the show acllog command .
2-666 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show ac lmer ge show ac lmerg e T o display informat io n about the A CL merge algor ithm, use the sho w aclm erge command.
2-667 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show ali as show alias T o di splay a li sting of defined c om mand alia ses, use the show al ias comm and.
2-668 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show arp show arp T o dis pla y the ARP t able , use the show arp comman d. show arp [ ip_addr | hostnam e ] [ noalias ] Syntax D escr i pti on Defaults Thi s command has no de fa ult set tings.
2-669 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show auth enticat ion show authen tication T o display authentica tion information, use the show au thentic ation co mman d.
2-670 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show au tho rization show authorizatio n T o display auth orization setup a nd config uration inform ation on the swit ch, use the sho w author ization comm and.
2-671 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show bann er show banne r T o vi ew the me ssa ge .
2-672 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show bo ot show boot T o displa y the conte nts of the BO OT enviro nment vari ables and the conf iguratio n regi ster settin g, use the show boot command.
2-673 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show boo t device show boot de vice T o display the NAM boot string st ored in NVRAM , use the show boot device comm and.
2-674 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show ca m show cam T o display CAM table entr ies, use the show c am command.
2-675 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s sho w ca m 1 00-60-09-78-96-fb * 4/1 [ALL] 1 00-80.
2-676 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show ca m agi ngtime show cam ag ingti me T o display CAM aging time info rmation for all conf igured VLANs, use the show cam agingtime comm and.
2-677 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show cam count show cam co unt T o display the number of CAM entries only , u se the show cam count command .
2-678 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show ca m m sf c show cam msfc T o display the router ’ s MA C- VLAN entries, use the sho w cam msfc comman d.
2-679 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show cam notification show cam notification T o display the status of CAM table notificati ons, notification intervals, and MAC addresses added a nd deleted, use the show ca m noti fication co mman d.
2-680 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show ca m not ification This exam ple shows how to di.
2-681 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show cam notification Relat e d Commands clear ca .
2-682 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show cd p show cdp T o di splay Cisco D iscovery Prot ocol (C DP) infor ma tion, use th e show cdp comm and.
2-683 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show cd p This example shows how to display detai led CDP neighbor informa tion. Th e display varies dependi ng on yo ur ne twork c onfigurati on at the ti me you r un the c omman d.
2-684 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show cd p Port Device-ID Port-ID NativeVLAN -------- .
2-685 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show chan nel show chann el T o d ispl ay E t herCh ann el i nfo rmat ion fo r a ch an nel , u se t he show channel co mm and.
2-686 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show ch anne l This exam ple shows how to di splay c .
2-687 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show chan nel Chan Port if- Oper-group Neighbor Ch.
2-688 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show ch anne l 768 469263 48083 Channel Dely-Exced MT.
2-689 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show chan nel ---- ----- -------- -------- -------.
2-690 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show ch anne l group show chann el group T o disp lay Ether Chan nel gr oup sta tus infor mati on, us e the show channel group comman d.
2-691 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show chan nel gro up Admin Port Device-ID Port-ID .
2-692 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show ch anne l group Admin Port Qos-Tx Qos-Rx Qos-Tru.
2-693 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show chan nel gro up Console> show channel grou.
2-694 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show ch annel ha sh show chann el has h T o display the channe l port the traff ic goes to based on the current ch annel distrib ution mode, use the show channel hash command .
2-695 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show channel mac show chann el mac T o display MA C information in the ch annel, use the sho w channel mac comm and.
2-696 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show ch anne lprot oco l show chann elprotocol T o d isp l ay the channeling prot ocol used by each m odule in the sys tem, u s e t h e show channelpr otocol comm and.
2-697 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show channel traffic show chann el traffic T o display c hannel p ort utilization based on MAC counters, use the show ch annel traffic comma nd.
2-698 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show co nfi g show config T o d isplay the nond efaul t sys tem or m odule con figurat ion, u se the show config command.
2-699 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show config ! #frame distribution method set port channel all distribution mac unknown ! #snmp set snmp trap 0.
2-700 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show co nfi g #rcp set rcp username 1 ! #dns set ip dns server 171.68.10.70 primary set ip dns server 171.
2-701 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show config #module 4 empty ! #module 5 : 48-port .
2-702 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show co nfi g #system set system baud 9600 set system modem disable set system name set system location set system contact ! .
2-703 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show config This e xample sho ws how to display the A CL config uration f ile location: Console> (enable) show config acl location ACL configuration is being saved in NVRAM.
2-704 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show co nfi g m od e show config mode T o disp lay the syst em conf igur ation mode cur rent ly runn ing on the swi tch, use the show conf ig mode comm and.
2-705 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show co n fig q os a cl show config qos acl T o display the co mmitted ac cess lis ts in a c ommand l ine form at, use th e show conf ig qos acl comm and.
2-706 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show co ps show cops T o display COPS information, use the show cops comm and.
2-707 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show co p s COPS connection state : connected Last active server : 171.21.34.56 Primary configured server : 171.
2-708 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show co ps COPS RSVP client state -------------------.
2-709 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show count ers show counte rs T o d isplay h ardwa re c oun ter s fo r a por t, all p orts on a m odul e, or a su pervi so r en gin e, u se t he show counters com mand.
2-710 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show co unt ers 15 rxTxHCpkts1024to1518Octets = 0 16 .
2-711 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show count ers Ta b l e 2 - 2 8 describes the possible fie lds in the show coun ter s comm and out put.
2-712 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show co unt ers 32-bit coun ters rxCRCA lignEr rors N.
2-713 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show count ers dot3StatsSingle ColFr am es A co unt of suc cessf ully t ra nsmitte d frame s on a p ar tic ular i nte rf ac e f or wh ich tran smission is inhibited b y exac tly one col lision.
2-714 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show co unt ers Relat e d Commands clear co unters rxPause Numbe r of c ontr ol f ra mes r ece ived at the gi gabi t l evel.
2-715 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show crypto key show crypt o key T o display RSA key pa ir information, use the sho w crypto k ey comm and.
2-716 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show de fau lt show defaul t T o che c k the stat us of the d efault po rt s tat us sett ing, u se the show default command.
2-717 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show dot1 q-all-tagged show dot1q-all-tagg ed T o display the status of the dot1q taggi ng featu re on the switch, use the show dot1q-all-tagged comm and.
Chapter 2 Catalyst 6 500 Series Swi tch and ROM M onitor Commands sh ow dot1x 2-718 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 2 show dot1x T o display the system dot1x capabi lities, protoco l version , and timer val u es, use the show dot1x comm an d.
2-719 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show dvla n statistics show dvlan statistics T o display dynamic VLAN statistic s, use the show dvlan statistics co mmand.
2-720 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show en vironm ent show environme nt T o display en vironmenta l, temperat ure, and inline po wer status infor mation, use the show en vir onment comm and.
2-721 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show en vironment This exam ple shows how to di sp.
2-722 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show en vironm ent This exam ple shows how to di splay t he in line power for al l m odule s: Console> show environment power PS1 Capacity:919.
2-723 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show en vironment Ta b l e 2 - 2 9 descri bes the f ields in t he show environment output.
2-724 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show en vironm ent Relat e d Commands set inlinepowe r defaultallocati on show environment show port inlinepo wer T ota l inline power drawn T o tal in line power drawn from the system.
2-725 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show errdi sable-t imeout show errdisab le-timeo ut T o display the configurat ion and stat us of the errdi sable tim eout, use th e show errd isable-timeout comm and.
2-726 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show err orde tection show errord etection T o display error detectio n settings, use the show errord etec ti on command.
2-727 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show f abric channel show fabri c channel T o display Switch Fab ric Module inform ation, use the show fabric channel command.
2-728 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show fabri c channe l Exam ples Th is exampl e sh ows.
2-729 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show f abric channel Relat e d Commands switch fabric Fab Chan F abric cha nnel number; s ee the “ U sage Guid elines” sectio n for addi tion al infor matio n.
2-730 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show file show file T o display the conte nts of a file that hav e been saved to Flash memory , use the show f ile command.
2-731 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show fla sh show flash T o list bootfl ash or Fl ash PC c ard in formatio n, inc luding file code nam es, version nu mber s, volume ID, status , and si z es , us e t he show flash command.
2-732 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show flas h Console> show flash chips ******** Int.
2-733 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show fla sh USAGE INFO: Bytes Used = 201D9B Bytes .
2-734 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show ga rp ti m er show garp timer T o display all the valu es of the General At tr ibute Reg istration Pro tocol (GARP) timers, us e the sho w garp timer comm and.
2-735 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show gm rp conf igurat ion show gmrp conf iguration T o display complete GMRP-rel ated configu ration informat ion, use th e show gmrp conf iguration comm an d.
2-736 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show gmr p stat is ti cs show gmrp statistics T o display all the GMR P-relate d statistics for a specified VLA N, use the show gmrp statistics comm an d.
2-737 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show gmrp tim er show gm rp timer T o display all the values of the GMRP timers, us e the show gmrp timer co mman d.
2-738 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show gvrp co nfigu rat ion show gvrp c onfigura tion .
2-739 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show gvr p co nfi gur a tio n Disabled Fixed Normal 4/2 Disabled Fixed Active 4/7 Disbled Forb idden Normal 4/3 Disbled Forb idden Active 4/6 GVRP Participants running on no ports.
2-740 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show gvrp s tatistic s show gvrp statistics T o vie w GVRP statistics for a port, use the show gvrp sta tistic s command.
2-741 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show gvrp stat istics Relat e d Commands clear g v.
2-742 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show ifin dex show ifindex T o display the informatio n of the specif ic ifIndex, use the show if index comman d.
2-743 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show igmp flooding show igmp fl ooding T o d isplay w het her t he IGM P f lood in g fea tur e is ena ble d o r disab led, u se the show igmp floo ding comm and.
2-744 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show igm p le ave-q uery -type show igmp le ave-query-type T o d ispl ay t he ty pe of q ue ry to b e sent whe n a po rt r ece iv es a l eave mess age, us e th e show igmp lea ve-query-type comman d.
2-745 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show ig mp m ode show igmp mode T o display the IGMP mode on the switch, use the show i gmp mode comman d.
2-746 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show igm p qu erier info rmatio n show igmp querier information T o disp lay queri er info rmatio n specific to a c onfigured V LAN, use the show igmp queri er inf ormation comm and.
2-747 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show igmp ratelimit-info show igmp ratelimit-info .
2-748 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show igm p s tatistics show igmp statistics T o vie w IGMP statistics f or a partic ular VLAN, use the show igmp statistics co mman d.
2-749 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s sh ow ig mp st a t is ti c s Relat e d Commands cl.
2-750 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show im agem ib show imagemib T o display i mage infor mation prov ided in th e CISCO-IM A GE -MIB for a partic ular imag e, us e the show imagemib command.
2-751 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show interface show interface T o display informat ion on network interf aces, use the show inte rface command .
2-752 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show inte rfa ce Relat e d Commands set interface dest IP address of the host to which the console por t will be conn ected.
2-753 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show ip alias show ip alias T o s how a listi ng of de fined IP al iases, us e the show ip alias co mman d.
Chapter 2 Catalyst 6 500 Series Swi tch and ROM M onitor Commands sh ow ip dns 2-754 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 2 show ip dns T o s how the DNS name server s and the de fault D NS dom ain nam e, us e t he show ip dns command.
2-755 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show ip d ns Relat e d Commands clear ip dns domai.
2-756 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show ip htt p show ip http T o vie w the HTTP conf iguration and the switch web inte rface inf ormation, use the show ip http comm and.
2-757 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show ip http This e xample sho ws the HTTP conf ig.
2-758 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show ip perm i t show ip permit T o display the IP permit list information , use the show ip pe rmit command.
2-759 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show ip permit Relat e d Commands clear ip permit set ip permit set snmp tr ap Last Accessed T ime Date and time of the last attempt to log in to the switch from the address.
Chapter 2 Catalyst 6 500 Series Swi tch and ROM M onitor Commands sh ow ip rout e 2-760 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 2s2 show ip route T o display IP routing table entries, use the show ip r oute command. show ip r oute [ noalias ] Syntax Descript ion Defaults Thi s command has no de fa ult set tings.
2-761 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show ip r out e Relat e d Commands clear ip r oute.
2-762 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show ke rber os show ke rbero s T o display the K erberos conf iguration information , use the show kerberos com mand.
2-763 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show kerberos Relat e d Commands clear ke rberos c.
2-764 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show l2pr otocol-t unnel sta ti st ic s show l2pro to.
2-765 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show l2 protoco l-tunnel stati stics Port VTP Fram.
2-766 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show lacp- channel show lacp-cha nnel T o di splay inf or matio n abo ut the Li nk A ggr egation Contr ol Pr otoc ol ( LACP) channe l, use t he show lacp-channel comman d.
2-767 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show l acp-chan nel Command Mode s Normal. Usage Guid el i nes If you do not speci fy the admi n-key v alue, infor mation about all LA CP channels is di splayed.
2-768 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show lacp- channel This example shows how to display .
2-769 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show l acp-chan nel This example shows how to display the outgo ing port for th e specified source and destination IP addresses: Console> (enable) show lacp-channel hash 808 172.
2-770 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show lcper roracti on show lcperroract ion T o di spl.
2-771 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show lda show lda T o displa y the ASLB conf iguration informati on, use the sho w lda comman d.
2-772 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show lda Command Mode s Normal.
2-773 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show lda LD Router Side: --------------- Router an.
2-774 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show lda This example shows ho w to di splay the num .
2-775 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show localuser show localu ser T o display the local user ac counts for a switch, use the show loca luser comma n d.
2-776 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show log show log T o display the error log for the system or a specif ic module, use the show log comman d.
2-777 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show log NVRAM log: 01.
2-778 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show log com mand show log comma nd T o dis play th e command log entries, u s e t h e show log co mmand command.
2-779 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show l ogging show loggin g T o display the system me ssage log info rma tion, u se the show logging comman d.
2-780 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show loggi ng qos 7 7 radius 7 7 rsvp 7 7 security 7 .
2-781 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show log ging buff er show loggin g buffer T o display sy stem m essages fro m the internal buf fer , use the show logging buffer comman d.
2-782 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show mac show mac T o display MA C counters, use the show mac comman d. show mac [ utilization ] [ mod [/ port ]] Syntax D escr i pti on Defaults Thi s command has no de fa ult set tings.
2-783 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show ma c -------- ---------- ---------- ---------.
2-784 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show mac Rcv -Octet Numbe r of octe t frames re ceived on the port. Xmit-Octet Nu mber o f octet f rames tran smitted on the port.
2-785 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show microco de show microcode T o display the version of the microcod e and the modu le version info rmation, use the sh ow microco de comm and.
2-786 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show ml s show mls T o display MLS Laye r 3 pack et infor mation in t he MLS-base d Catalyst 6500 series swi tches, us e the show mls com mand.
2-787 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show mls MSFC ID Module XTAG MAC Vlans --------------- ------ ---- ----------------- -------------------- 52.
2-788 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show ml s acl-ro ut e show mls acl-route T o display summa ries from A CL for r outing in the MLS-based Cataly st 6500 series switches, u se the show mls acl-r oute command.
2-789 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show mls cef interface show mls cef interface T o display MSFC VLAN informatio n, use the sh ow mls cef i nterf ace command.
2-790 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show ml s c e f in te rfa ce This e xample sho w how to display info rmation for a specif ic CEF VLAN: Console> (enable) show mls cef interface 46 Module 16: vlan 46, IP Address 46.
2-791 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show m l s ce f ma c show mls cef mac T o displ ay.
2-792 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show mls cef summary show mls cef summary T o display a summary of CEF table information , use the show mls cef summary comman d.
2-793 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show mls cef summary Relat e d Commands clear mls cef sho w mls cef interfa ce show mls cef mac show mls entry cef IPX r out e e ntri es N umbe r of IP X ro ut e en t ries.
2-794 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show ml s entry show mls entry T o display state information in the M LS-based Cataly st 6500 series switches, u se the sho w mls entry comm and.
2-795 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show mls entry Usage Guid el i nes On swit che s c.
2-796 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show ml s entry The show mls entry com mand disp lays bridge d flows on a Supervisor En gine 1 when bridg ed flow statistics is enabled.
2-797 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show mls entry For destinati on-only flow: Console.
2-798 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show ml s entry 401.
2-799 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show mls entry 0.0.0.2 0.0.0.2 2 201 101 cc-cc-cc-cc-cc-cc 2 ARPA 0 0 01:03:21 01:00:51 cccccccc cccccccc 0.
2-800 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show ml s entry cef show mls entry cef T o display CEF and adjacenc y entries (and Tx statistics) for IP resolved entries an d IPX resolved or connect ed entries, us e the show mls entry cef comm and.
2-801 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show mls entry cef Exam ples Th is exam ple shows .
2-802 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show ml s entry cef This exam ple sh ows how to displa y adj ace ncy infor mat ion: Console> (enable) show mls entry cef ip adjacency Mod: 16 Destination-IP: 127.
2-803 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show mls entry cef Relat e d Commands clear mls ce.
2-804 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show ml s entry net flow-ro ut e show mls entry netflow-route T o display shortcut informatio n in the MLS-based Catalyst 6500 series switches, use the show mls entry netflow-r oute comman d.
2-805 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show mls entry netflow-route Ente rin g th e desti.
2-806 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show ml s exclude pr otocol show mls exclude protocol T o displa y excluded pr otocols on T CP or UDP f rom being sho rtcuts, u se the show mls exclud e prot ocol comm and.
2-807 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show mls multicast show mls multicast T o display IP multicast MLS inform ation, use the show mls multi cast command.
2-808 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show mls mu lticast If you disab le DNS, no nam e can be speci fied or show n.
2-809 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show mls multicast This e xample shows h ow to dis.
2-810 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show mls mu lticast Receive: Feature Notifications: 0.
2-811 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show mls multicast Relat e d Commands clear mls multicast statist ics Source -IP IP a dd ress o f th e sour ce that co rre sp onds to thi s f low .
2-812 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show ml s nde show mls nde T o display NetFlo w Data Export informati on, use the show mls nde comm and.
2-813 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show mls n etflow-route show mls netflow-route T o display summar ies from NetFlo w for routing in the MLS-based Catalyst 6500 series switch es, use the show mls netflow -route command .
2-814 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show mls pb r-route show mls pbr-route T o display statistics about polic y-based routing (PBR) traff ic, use the show ml s pbr - route command.
2-815 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show mls stati stics show mls statistics T o display MLS statistics info rmation in the MLS-based Cata lyst 6500 seri es switches, use the show mls statistics command.
2-816 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show ml s statis t ics Usage Guid el i nes If your sy.
2-817 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show mls stati stics Exam ples Th is example sh ow.
2-818 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show ml s statis t ics Note Th e foll owing command s are ou tput fr om switc hes configu red wit h the Sup ervisor Engin e 1 with Lay er 3 Switchi ng Eng in e WS-F6 K-PFC.
2-819 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show mls verify show mls verify T o disp lay t he Layer 3 error ch ecki ng conf igur ation, use the show mls verify command .
2-820 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show mod ule show module T o disp la y m odul e sta tus and in forma t ion, use th e show module comma nd.
2-821 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s sh ow m o dul e Mod MAC-Address(es) Hw Fw Sw --- -------------------------------------- ------ ---------- -------------- 1 00-30-80-f7-a5-06 to 00-30-80-f7-a5-07 1.
2-822 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show mod ule Ta b l e 2 - 4 9 describes the possible fi elds in the show module comm and out put. T able 2-49 sho w module Com mand Output F ields Field Description Mod M o dule nu mbe r .
2-823 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show moduleinit show moduleinit T o d ispl ay c ontent s of t he i nform ation stor ed i n the sy stem m odule i niti atio n lo g, use the show moduleinit co mmand.
2-824 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show mod ule init Success_Exit State 2: Entry/Exit/El.
2-825 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show msfc autostate show msfcautosta te T o display the Multilayer Switc h Feature Card (MSFC) auto port state, use the show msfcautosta te comm and.
2-826 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show ms m aut ostate show msmautosta te T o display t.
2-827 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show multicast group show multi cast group T o display the multicast group conf iguration, use the show multicast group comm and.
2-828 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show mult icast gr oup Relat e d Commands clear multi cast router set multicast router show multicast r outer CoS CoS v alu e.
2-829 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show multicast group count show multi cast group coun t T o show the total count of multicast addresses (g roups) in a VLAN, use th e s how multicast group c ount comm and.
2-830 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show mul ticast pr ot ocols st atus show multicast protocols status T o display the status of Layer 2 multicast pro tocol s on the switch, us e the sho w multic ast pr otocol s status comma nd.
2-831 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show multicast router show multicast router T o displa y the port s that have IGMP or RGMP -capab le rou ters assigned t o them, use the show multicast rou t er command.
2-832 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show mul ti ca st router Ta b l e 2 - 5 2 descr ibes the f ields in t he show multic ast ro uter command ou tput.
2-833 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show multicast v3-group show multicast v3-group T o di splay IGM P version 3 in forma ti on ba sed on grou p I P a ddre ss, use t he show mu lti cast v3 -gro up comm and.
2-834 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show ne ts tat show netstat T o display the current ly activ e network connections an d to list statistics for the v arious protocols in the TCP/IP , use the show netstat comman d.
2-835 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show net stat 69 duplicate acks 0 acks for unsent data 3468 packets (15367 bytes) received in-sequence 12 completely duplicate packets (20 bytes) 0 packets with some dup.
2-836 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show ne ts tat This exam ple sh ows how to displ ay U.
2-837 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show net stat Ta b l e 2 - 5 4 descri bes the f ields in t he show netsta t udp comman d o ut pu t.
2-838 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show ne ts tat This example shows how to display I CM.
2-839 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show net stat This exam ple sh ows how to displa y the IP r out ing ta ble: Console> show netstat routes DESTINATION GATEWAY FLAGS USE INTERFACE default 172.
2-840 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show ne ts tat Ta b l e 2 - 5 8 descr ibes the f ields in t he sho w nets tat interfac e command o u tput.
2-841 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show ntp show ntp T o displa y the curren t NTP status, us e the show ntp command . show ntp Syntax Descript ion This c omm and ha s no a rgume nts o r keywords.
2-842 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show ntp Relat e d Commands clear ntp ser ver set ntp.
2-843 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show pbf show pbf T o display PBF-related information , use the show pbf comman d.
2-844 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show pb f -------------------------------------------.
2-845 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show pbf-map show pbf-map T o display PBF map information, use the show pbf- map co mmand . show pbf-map { vla n | config } Syntax Descript ion Defaults Thi s command has no de fa ult set tings.
Chapter 2 Catalyst 6 500 Series Swi tch and ROM M onitor Commands show port 2-846 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 22 show port T o disp lay port st atus infor matio n, use the show port comman d. show port [ mod [ /port ]] Syntax Descript ion Defaults Thi s command has no de fa ult set tings.
2-847 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show port Exam ples Th is example shows how to dis.
2-848 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show po rt Port Security Violation Shutdown-Time Age-.
2-849 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show port 7/8 enable 00-10-7b-00-0a-5f (Port host .
2-850 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show po rt 3/8 onhook 1 full 64k FXS 3/9 onhook 1 ful.
2-851 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show port Vlan VLANs to which the port belon gs. Auxiliaryvla n 1 Auxiliar y VLANs to which the port belongs.
2-852 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show po rt Multi-Coll Number of times multiple collisions oc curred before the port tra nsmitted a frame to the med ia succ essfully .
2-853 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show port Relat e d Commands set port disable set port enable show port status Good-by tes T o tal number of octets in frames with no erro r .
2-854 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show po rt arp-insp ection show port a rp-inspection T o di splay the drop thr eshol d an d shutdown t hres hol d for sp eci fic por ts, u se the show port arp-inspection comman d.
2-855 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show port au xiliaryv lan show port auxiliaryvlan T o display the port auxiliary VLAN status f or a sp ecif ic port, use the sho w port aux ili aryv lan comm and.
2-856 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show po rt au xiliaryvl an This exam ple sh ows how t.
2-857 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show port br oad ca st show port b roadcast T o display broadcast information, use the show port br oadcast comma nd .
2-858 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show po rt br oadcas t Relat e d Commands set port broadcast T ota l-Drop Number of broadcast , multic ast, an d unicast pac kets droppe d because the port bro adcast l imit was exc eeded.
2-859 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show port capabilities show port c apabilities T o display the capabilit ies on the ports, use the show port capabilit ies comm and.
2-860 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show po rt ca pabilitie s This e xample shows th e po.
2-861 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show port capabilities This e xample sho ws the po.
2-862 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show po rt ca pabilitie s Ta b l e 2 - 6 3 describe s the possible fi elds (depen ding on the type of port que ried) and the v alues in th e show port capabilities command ou tput .
2-863 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show port capabilities Relat e d Commands set port.
2-864 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show po rt cd p show po rt cd p T o display the port CDP enable state and the message interv al, use the show port cdp command .
2-865 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s sho w po r t cd p Ta b l e 2 - 6 4 descri bes the f ields in t he show port c dp command o utput.
2-866 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show po rt ch annel show port c hannel T o disp lay Ether Chan nel inf ormation , use the show port channe l command .
2-867 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show port c hannel Exam ples Th is exampl e sh ows.
2-868 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show po rt ch annel priority vlanpri vlanpri-vlans --.
2-869 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show port c hannel 3/4 enabled normal disabled Con.
2-870 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show po rt ch annel Speed S pee d set ting for the port (aut o, 1 0, 10 0, 10 00) . Dupl ex Duplex sett ing for the por t (auto, full, half).
2-871 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show port c hannel Relat e d Commands set port channel show channel sho w chann el gr oup GVRP regist ration Sta tus of the ad ministra tive contro l of an outbo und port (nor mal, fixed, forbidden).
2-872 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show po rt co ps show port c ops T o display COPS informati on on all or individual port s, use the show port cops comm and.
2-873 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show port cops This example shows how to display C.
2-874 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show po rt co unters show port c ount ers T o sho w all the counters for a port, u se the show port count ers command.
2-875 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show por t count ers Ta b l e 2 - 6 7 describ es the possib le fields (de pending on the port t ype que ried) in the show port counters comm an d o utpu t.
2-876 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show po rt de bounce show port d ebounce T o displa y whether the port debo unce tim ers are enabled or disa bled, use the show port debounce comm and.
2-877 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show port dot1q-all-tagged show port d ot1q-all-tagged T o sho w the status of the dot1q-a ll-tagged featur e on all or specif ic ports, use the show port dot1q-all-tagged com mand.
2-878 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show po rt do t1q-ethe rty pe show port d ot1q-ethertyp e T o s how the stat us of t he 8 02. 1q Eth erty pe field on a ll or spe c ific port s, us e the show port dot1q-ethertype comm and.
2-879 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show po r t do t 1qtu nne l show port d ot1qtunnel T o di splay the dot1q tun nel mo de sta tus, use the show port dot1qtunnel command.
2-880 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show po rt do t1x show po rt dot1x T o displa y all t.
2-881 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show po rt dot1 x Th i s ex am pl e displays the s.
2-882 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show po rt er rdisable -timeout show port e rrdisable.
2-883 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show por t errdi sable-t imeout This e xample sho .
2-884 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show po rt f low c ontrol show port fl owcontrol T o display per- port status inf ormation and statistics rela ted to fl ow control, us e the show port flowcont rol command.
2-885 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show por t flowcontr ol Ta b l e 2 - 6 8 descri bes the f ields in t he sh ow p o rt fl owc o nt rol command out put.
2-886 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show po rt i nli ne power show port in linepower T o display the port power admini strati on and opera tional status, use the show po rt i nl i nep ower comm and.
2-887 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s sh ow po rt jumb o show port jumbo T o display th e jumbo fram e setting s for all port s with the feat ure enabled, use the show port jumbo comm an d.
2-888 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show po rt l 2pr otocol-t unn el show port l2 pro tocol-tun nel T o di splay Lay er 2 pr otoc ol tu nnel ing info rma tion on a po rt or ra nge o f por ts, u se the show port l2protocol-tunnel command .
2-889 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show port lacp -channel show port la cp-channel T o display inform ation about LA C P channels b y port or module numb er , use the sho w port lacp-channel comman d.
2-890 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show po rt l acp -channe l This exam ple sh ows how t.
2-891 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show port lacp -channel This exam ple shows how to.
2-892 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show po rt mac show port mac T o displ ay po rt MA C coun ter inf ormation , use the show port mac com mand.
2-893 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show p ort mac Ta b l e 2 - 6 9 describes the possible fie lds in the show p ort ma c comman d outpu t.
2-894 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show po rt mac -addres s show port mac-add ress T o displa y the MA C address as sociat ed with a ph ysical por t or ports, use th e show port mac-address comm and.
2-895 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s sh ow po rt mac -ad d re ss Port Mac address ----- ---------------------- 5/1 00-d0-d3-33-80-9c 5/2 00-d0-d3-33-80-9d .
2-896 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show po rt ne gotiati on show port n egotiation T o di splay the link n egotiat ion pro toco l se ttin g f or t he sp ec ified por t, use t he show port negot iation comm and.
2-897 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show port p rbs show po rt pr bs T o di splay the .
2-898 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show po rt pr otocol show port p rotocol T o v iew proto col filters co nfigured on the E the rChan ne l por ts , use the show port protocol co mmand.
2-899 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show port qo s show po rt qo s T o display QoS-related info rmation, use the show port qos comman d.
2-900 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show po rt qo s Runtime: Port ACL name Type ----- -------------------------------- ---- No ACL is mapped to port 2/1.
2-901 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show port qo s Config: Port ACL name Type ----- -------------------------------- ---- No ACL is mapped to port 4/1.
2-902 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show po rt rsvp show port rsvp T o di splay RSVP i nforma ti on on a per- por t basi s, us e the show po rt rsvp command .
2-903 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show po r t se cur ity show port se curity T o vie w port security conf iguration informatio n and statistics, u se the sho w port se curity co mmand.
2-904 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show po rt s ecu rity Port Secure-Src-Addrs Age-Left .
2-905 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show po r t se cur ity This e xample shows ho w to.
2-906 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show po rt s pan tree show port sp antree T o v iew port spa nnin g t ree in for ma tio n, us e th e show port spantree command.
2-907 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show port sta tus show port st atus T o disp lay port st atus infor matio n, use the show port status co mma nd.
2-908 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show po rt sync-re start-de lay show port sync-restart-delay T o display a port’ s synchronization restar t delay , use the sho w port syn c-r estart-d elay co mmand .
2-909 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show po r t tdr show port tdr T o display the results of the T ime Domain Reflectometer (TDR) test on a port , use the show port t dr comm and.
2-910 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show po rt t dr Port Speed Local pair Pair length Rem.
2-911 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show po rt trap show port trap T o disp lay port t rap stat us, use the show port trap comman d. show port trap [ mod [ /port ]] Syntax Descript ion Defaults Thi s command has no de fa ult set tings.
2-912 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show po rt t runk show port trunk T o display port trun k information, use th e show port trunk co mm an d.
2-913 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show p ort trun k Ta b l e 2 - 7 2 descri bes the f ields in t he show port t runk command outpu t.
2-914 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show po rt un icast-f lood show port unicast-flood T o d isplay the run -time c onfigurat ion o f the po rt u s ing unic ast floo d b lock ing, us e the show port unicast-flood comm and.
2-915 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show po rt voice show port voice T o display vo ice port informat ion, use the show po rt voi ce co mmand .
2-916 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show po rt v oic e Port DNS-Server(s) Domain -------- ----------------- ------------------------------------------------- 7/1 dns-sj3.
2-917 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show po rt voice 7/5 10.
2-918 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show po rt voice ac tive show port vo ice active T o displa y acti ve call inform ation on a port, use the show port voice active co mman d.
2-919 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show por t voice act ive Exam ples T h is ex am p .
2-920 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show po rt voice ac tive Fax Transmit Duration : 3324.
2-921 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show por t voice act ive Low water playout delay :.
2-922 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show po rt v oic e fdl show port vo ice fdl T o display the fac ilities data link (FDL) s tat is tic s for the specif ied ports, use the show port voice fd l comm and.
2-923 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show po rt v o ice f dl Ta b l e 2 - 7 3 descri bes the pos sible fields (d epen ding on th e port ty pe queri ed) in th e s h ow p or t voi ce f dl comm an d o utpu t.
2-924 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show po rt v oic e interfa ce show port vo ice interf ace T o d i s p l a y t h e port vo ice interface configuration, us e t h e show port voic e interfac e command.
2-925 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show proc show proc T o display CPU, memory allocatio n, and process utilizatio n information, use the show pr oc co mmand .
2-926 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show pro c Memory Pool Utilization Memory Pool Type 1.
2-927 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show proc 44 -2 16 0 16 Backend_Rx 45 -2 16 0 16 B.
2-928 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show pro c 5Min A verage me mory poo l usage o ver the last 5-min ute int erv al. 10Mi n A vera ge m em ory p ool usa ge over the last 10 -min ute in terval.
2-929 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show pro tocolfilter show proto colfilter T o list whether proto col filte r ing is enabled or disab led, use the show pr ot ocolfilter com mand.
2-930 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show pvla n show pvlan T o s how th e co nfigur ati on fo r a given private VLA N, u se t he show pvlan command.
2-931 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show pvlan Console> This e x ample sho ws how t.
2-932 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show pvla n capabi li ty show pvlan capability T o d eterm i ne w het he r or not a por t c an be ma de a p riv ate port, us e the show pvlan capability comm and.
2-933 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show pvlan capability Console> (enable) show pvlan capability 5/3 Ports 5/1 - 5/12 are in the same ASIC range as port 5/3.
2-934 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show pvla n mappin g show pvlan mappi ng T o s how the private VLAN map pi ng s configu re d o n pro mi sc uous po rts, use t h e show pvlan mapping comm an d.
2-935 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show pvlan mapp ing Relat e d Commands clear co nf.
2-936 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show qo s acl ed it buf fer show qos acl editbuffer T o display A CL names in the edit buf fer , use the show qo s acl editbuffer command.
2-937 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show qos acl info show qos acl in fo T o display QoS A C L information, use the show qos acl info comman d.
2-938 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show qo s acl info 2. set qos acl ip my_ip_acl trustdscp microflow my-micro aggregate agg tcp 173.22.3.4 255.
2-939 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show qos acl map show qos acl map T o display the ACL mapping inform ation, use the show qos acl map command.
2-940 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show qo s acl map This e xample shows h ow to display.
2-941 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show qos acl resource- usage show qos acl resou rce-us age T o disp lay ACL ma nage ment in forma tion, use t he show qos acl resour ce-usage comman d.
2-942 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show qo s bri dged-m icroflow -polici ng show qos bridged -microflow-p olicing T o disp lay th e VLAN-bri dged pack et- polic ing stat us, u se the show qos bridged-packet-policing comm and.
2-943 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show qos info show qos info T o display QoS-related information for a specif ied port, use the sho w qos i nf o com mand.
2-944 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show qo s info The num ber pr eceding the p lette r in the port_type value (for ex ample, 1p2q2t and 1p1q4t ) determines the threshold in the prio rity queue.
2-945 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show qos info This exam ple sh ows how to displ ay.
2-946 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show qo s info This exam ple sh ows anothe r di splay.
2-947 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show qos info This exam ple shows how to di splay .
2-948 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show qo s info This exam ple shows anothe r di sp lay.
2-949 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show qos mac-cos show qos mac-cos T o display the currently con figur ed QoS-related information f or the MA C address and VLAN pa ir , use the show qos mac-cos command .
2-950 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show qo s mac-cos Relat e d Commands clea r q o s m a.
2-951 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show qos map s show qos maps T o di splay the mappi ng o f d i fferent ma ps, us e the show qos maps comman d.
2-952 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show qo s maps This exam ple shows how to di spla y the ip prec -ds cp-ma p map: Console> show qos maps ipprec-dscp-map IP-Precedence - DSCP map: IP-Prec DSCP ------- ------------------- 0 1 .
2-953 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show qos map s DSCP policed-dscp map: In-profile D.
2-954 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show qo s policer show qos poli cer T o displ ay micr oflow or a ggreg ate pol icers cu rrently conf igured, use the show qos policer comm and.
2-955 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show qos p olicer -------------------- -----------.
2-956 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show qo s policy -source show qos policy-source T o di splay the QoS po licy sour ce i nfor ma tio n, us e the show qos policy-source comman d.
2-957 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show qos rsvp show qos rsvp T o display RSVP information, use the show qos r svp command. show qos rsvp { info | flo w-inf o } Syntax Descript ion Defaults Thi s command has no de fa ult set tings.
2-958 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show qo s statist ics show qos statistics T o displa y the var ious QoS-r elated counters for a speci fied por t, use the sh ow qos s tatis tic s co mmand.
2-959 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show qos stati stics This exampl e sh ows how to displa y the Qo S sta tistic s for mo dule 2: Console> (enable) show qos statistics 2 Warning: QoS is disabled.
2-960 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show qo s statist ics export info show qos statistics export info T o displa y QoS data export configurati on and stati stical in format ion, use t he show qos st atistics export inf o comman d.
2-961 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show qos stat us show qos status T o d i sp l ay if QoS is enabled on the switch, u s e t h e show qo s status comm and.
2-962 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show radi us show radius T o disp lay co nf igured RAD IUS par ameters, u se the sho w radius comma nd. show radi us [ noalias ] Syntax D escr i pti on Defaults Thi s command has no de fa ult set tings.
2-963 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show radius Relat e d Commands set radius attribut.
2-964 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show rcp show rcp T o display rcp informatio n, use the sho w r cp command . show r cp Syntax D escr i pti on This comm and has n o keywords or a rgument s.
2-965 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show reset show reset T o display scheduled reset information, use th e show r eset comman d. show r eset Syntax Descript ion This c omm and ha s no keywords or argume nts.
2-966 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show rgm p group show rgmp group T o displa y all mult icast groups or the c ount of m ulticast g roups that are jo ined b y RGMP-cap able router s, use the show rgmp group command .
2-967 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show rgmp stati stics show rgmp statistics T o displa y all the RGMP-re lated statis tics for a gi ven VLAN, use the show rgmp statistics command.
2-968 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show rspan show rspan T o display the remote SP AN configura tion, use the show rspan comman d. show rspan Syntax D escr i pti on This comm and has n o keywords or a rgument s.
2-969 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s sho w r s pan Destination : Port 6/1 Rspan Vlan : .
2-970 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show run ni ng-conf ig show running-con fig T o display the conf iguration informatio n currently runn ing on the switch or the conf iguration for a specif ic A C L, use the show running-config comman d.
2-971 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show runni ng-conf ig # ***** NON-DEFAULT CONFIGURATION ***** ! ! #time: Mon Jun 11 2001, 08:22:17 ! #version 6.
2-972 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show run ni ng-conf ig set vlan 11 3/2 ! #module 4 em.
2-973 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show securit y acl show security acl T o displa y the co ntents of the VACL that are c urrently c o nfigured or last c ommitted t o NVRAM and hardwa re, use th e show security acl comman d.
2-974 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show s ecur ity ac l ipx1 IPX Committed ipx2 IPX Comm.
2-975 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show securit y acl --------------------------------------------------- arp permit 1. redirect b_1 ip host 43.
2-976 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show s ecur ity ac l ar p-insp ect ion show security .
2-977 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show s ec urit y ac l cap t ure- por t s show security acl c apture-ports T o display the c a pture p ort list, use th e show secur ity acl captur e-ports co mmand.
2-978 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show s ecur ity acl f eature rate limit show security.
2-979 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show security acl log show security acl lo g T o di splay V A C L log i n forma tio n, use the show security acl log comma nd.
2-980 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show s ecur ity ac l l og Defaults Thi s command has no de fa ult set tings. Comma nd T ypes Sw itch co mman d.
2-981 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show security acl log reas sembly- timeo ut, redi .
2-982 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show s ecur ity ac l map show security acl map T o display VACL-to-V LAN mapping for a spe cified VACL or VLAN, use the show security acl map comm and.
2-983 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show secur ity acl res o urce-usage show security acl resou rce-us age T o disp lay VACL ma nage ment infor matio n, use the sho w securit y acl res ourc e-usage co mmand .
2-984 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show snm p show snmp T o display SNMP informat ion, use the show snmp comma nd. show snmp [ no alias ] Syntax D escr i pti on Defaults Thi s command has no de fa ult set tings.
2-985 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show snmp Chassis Alias:my chassis Traps Enabled: .
Chapter 2 Catalyst 6 500 Series Swi tch and ROM M onitor Commands show snmp acce ss 2-986 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 22 show snmp a ccess T o displa y SNMP access inf ormati on, use the show snmp access com mand.
2-987 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show snmp access Ther e are three vers ions of S NMP: • V ersion 1 (SNMPv1)—This is the initial implem entation of SNMP .
2-988 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show s n m p ac cess- list show snmp access-list T o disp lay SNMP a ccess lis t numbe rs and co rresp onding I P addre sses and I P masks , use the show snmp access-list command.
2-989 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show snmp buffer show snmp buffer T o displa y the num be r of SNMP pa ckets that can be saved in the SNM P UD P soc ket receive buf fe r, use the show snmp buffer command.
2-990 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show snmp community show snmp community T o display SNMP conte xt information, use the show snmp community comman d.
2-991 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show snmp community This exam ple sh ows the d isp.
2-992 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show snm p co ntext show snmp c ontext T o display SNMP conte xt information, use the show snmp context comman d.
2-993 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show s n mp coun ters show snmp c ounters T o display SNMP counter info rmation, use the sho w snmp counters com mand.
2-994 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show snm p co unters snmpInASNParseErrs = 0 snmpInToo.
2-995 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show s n mp coun ters snmpInT o talReqV ars Number o f MIB objects retriev ed successfu lly by th e SNMP prot ocol entit y as the resul t of recei ving v alid S NMP Get-Reque st and Get- Next PDUs.
2-996 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show snm p co unters snmpInT raps Num ber of SNMP Tr ap PDUs accept ed and proc essed by the SNMP protoc ol entity .
2-997 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show sn mp engineid show snmp e ngineid T o display the SNMP local engine ID, use the show snmp engineid comman d.
2-998 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show snm p gr oup show snmp group T o di splay the nam e of t he SNMP gro up or col lect ion o f use rs who have a common a ccess p ol icy , use the show snmp g roup command .
2-999 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show snm p gr oup The SNMP func tionality o n the Cata lyst enterp rise LAN switc hes for SNMP v 1 and SNMP v 2c remain s intact; ho we ver , the functionality has greatly e xpanded for SNMPv3.
2-1000 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show snm p i falias show snmp ifalias T o display SNMP interfa ce aliases, use the show snmp ifalias comman d.
2-1001 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show snmp notify show snmp notify T o display the snmpNoti fyT able conf iguration, use th e sho w snm p noti fy command.
2-1002 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show snm p no tify Ta b l e 2 - 8 0 descr ibes the f ields in t he show snmp notify command out put.
2-1003 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show snmp rm onmemo ry show snmp rmonmemory T o display the memory usag e limit in percenta ge, use the show snmp rmonmemory comma nd.
2-1004 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show snm p t argeta ddr show snmp ta rgetadd r T o display the SNMP tar get address entries in the snmpT argetA ddressT able, use the show snmp targetaddr co mmand .
2-1005 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show snmp target addr Ta b l e 2 - 8 1 descri bes the f ields in t he show snmp tar getaddr command ou tput .
2-1006 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show snmp targetparams show snmp ta rgetparams T o d.
2-1007 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show sn mp target para ms Ta b l e 2 - 8 2 descri bes the f ields in t he show snmp tar getparams comma nd output .
2-1008 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show snm p us er show snmp user T o displa y SNMP infor mation fo r a specif ic user , use the show snmp us er comman d.
2-1009 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show s n mp user Ta b l e 2 - 8 3 descri bes the f ields in t he show snmp user comma nd output .
2-1010 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show sn mp vie w show snmp view T o disp lay th e SNMP MIB vi e w conf igurati on, use the show snmp vie w comm and.
2-1011 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s sh ow snmp view Ta b l e 2 - 8 4 descri bes the f ields in t he show snmp view comma nd output.
2-1012 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show span show span T o display informat ion about the curren t SP AN conf iguration, use the show span comm and.
2-1013 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show span Relat e d Commands clear co nfi g set spantree root Multicast Status of whether monitoring m ulticast t raf f ic is enable d or disab led.
2-1014 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show spant ree show spantree T o displ ay span ning tree i nform ation fo r a VLAN or po rt, use t he show spantree comm and.
2-1015 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show spantr ee Exam ples This example (while in P.
2-1016 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show spant ree Port State Role Cost Prio Type ------.
2-1017 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show spantr ee Relat e d Commands show spantr ee .
2-1018 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show spant ree bac kbonefas t show spantree ba ckbonefa st T o disp lay whether the sp anning tree Back boneF ast Con ver gence f eature is ena bled, use th e show spantree backbonefast com mand.
2-1019 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show sp ant r ee bloc k ed por t s show spantree bl ockedports T o di splay o nly the bloc ked por t s o n a p er-VLAN or per-insta nce basi s, use th e show spantree blockedports co mmand .
2-1020 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show spant ree blo cke dports Relat e d Commands sho.
2-1021 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show spantree bpdu-filter show spantree bpdu-filter T o display information ab out BPDU filtering , use the show spantree bpdu-f ilter command.
2-1022 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show spant ree bpd u-guard show spantree bp du-guard T o display informat ion about BPDU guard, use the show spantr ee bpdu-guard comman d.
2-1023 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show spantr ee bpdu-ske wing show spantree bp du-skewing T o display BPDU ske wing detection status, use the show spantree bpdu-skewing comm an d.
2-1024 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show spant ree bpd u-skewi ng .
2-1025 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show spantree conflicts show spantree conflicts T.
2-1026 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show spant ree con flicts This e xample shows th e o.
2-1027 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show sp a ntree defaultcostmode show spantree de faultcostmode T o displa y the curr ent def ault port c os t mode, use th e sh ow span tree de fault costmode co mmand.
2-1028 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show spant ree gua rd show spantree gu ard T o display spanning t ree guard inf ormatio n for the VLANs or i nstances on a po rt, use the show s pantr ee guard com mand .
2-1029 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show spantr ee guard Exam ples Th is exampl e sh .
2-1030 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show spant ree mapp ing show spantree mappi ng T o display VLAN and instan ce mapping informa tion, use the show spantree mapping .
2-1031 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s sh ow spantree mapping This e xample shows h ow t.
2-1032 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show s pant ree mis tp -instanc e show spantree mistp-instan ce T o display instance info rmation, use the show spantree mistp-instance comma nd.
2-1033 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show spantree mistp-instance Ta b l e 2 - 8 9 des.
2-1034 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show spant ree mst show spantree mst T o display MST informa tion, use the show spantree mst comm and.
2-1035 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s sh ow s pan tr ee m st This e xample shows h ow t.
2-1036 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show spant ree mst con fig show spantree mst conf ig.
2-1037 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show spantree mst config 7 301-400 8 - 9 - 10 - 1.
2-1038 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show spant ree port fa st show spantree po rtfast T o di splay Port Fast infor ma tion, use th e show spantree portfast comman d.
2-1039 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s sh ow spantree porti nstancecost show spantree po rtinstanc ecost T o sho w the path cost fo r the inst ances on a port , use the show spantree portinstancecost co mman d.
2-1040 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show spant ree port v lancost show spantree po rtvlanco st T o sho w the path cost for the VLANs or e xtended-r ange VLANs, use the show spantree portvlanc ost comm and.
2-1041 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show spantree statistics show spantree sta tistics T o sho w spanning tree statistica l information, us e the show spantree statistics comman d.
2-1042 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show s pant ree stat istics PORT based information &.
2-1043 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show spantree statistics This e x ample sho ws ho.
2-1044 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show s pant ree stat istics num of similar bpdus to .
2-1045 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show spantree statistics bridge forward delay 15(.
2-1046 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show s pant ree stat istics port _inc onsis tenc y Status of whether the port is i n an inconsist ent (PVI D or p ort type ) stat e or no t.
2-1047 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show spantree statistics Relat e d Commands clear.
2-1048 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show s pant ree sum m ary show spantree su mmary T o d isplay a summ ar y of spanni ng t r ee i nfor ma tio n, use th e show spantree summary comman d.
2-1049 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show sp a ntree summa r y This exam ple shows how.
2-1050 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show s pant ree sum m ary This exam ple sh ows how t.
2-1051 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show spantree up linkfast show spantree up linkfast T o sho w the UplinkF ast feature settings, use the show spantr ee uplinkfast comman d.
2-1052 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show spant ree upl in kfast This e xample sho ws how.
2-1053 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show start up-config show startu p-config T o dis.
2-1054 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show star tup-co nfi g #vtp set vtp domain dan set v.
2-1055 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show start up-config #module 8 empty ! #module 9 .
2-1056 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show summertime show summertime T o disp lay th e curr ent st atus of the sum mertime feature, u se the show summertime comman d.
2-1057 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show system show system T o display system information, use the sho w system command. show system Syntax Descript ion This c omm and ha s no keywords or argume nts.
2-1058 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show sy stem Core Dump Core File -------------------.
2-1059 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show system Syslog Dump Syslog File -------------.
2-1060 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show sy stem Relat e d Commands set system ba ud set.
2-1061 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show system highava ilability show system hi ghava ilability T o display the system high-a v ailability con figurat io n settings, use the show system higha vailability comm an d.
2-1062 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show sys te m superv is or- update show system super.
2-1063 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show system switchmode show system switchmode T o display the system switching mode setting, use the show system switchmode comma nd.
2-1064 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show tacac s show tacacs T o di splay the T ACA CS+ pr otoc ol c on figuration, use th e show ta cacs comm and.
2-1065 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show tacacs Relat e d Commands set tac acs a ttem.
2-1066 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show te ch- suppor t show tech-supp ort T o di splay.
2-1067 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show tech-su pport If you spe cify the config ke .
2-1068 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show te ch- suppor t • show system • show spantr.
Chapter 2 Catalyst 6 500 Series Swi tch and ROM M onitor Commands show test 2-1069 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 222 show test T o display the errors r eport.
2-1070 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show te st DontLearnTest: . ConditionalLearnTest: . BadBpduTest: . TrapTest: . Loopback Status [Reported by Module 2] : Ports 1 2 ----------- .
2-1071 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show test This e xample shows the di splay if you do not specify a module: Console> show test Environmental Status (.
2-1072 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show te st Ta b l e 2 - 9 3 descri bes th e po ssible fields in the show test c om mand ou tput . The fields shown depend on the m odule ty pe qu er ied.
2-1073 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show test Relat e d Commands set tes t di agfa il- ac tion set test dia glevel DPRAM T est results for the dual-po rt RAM.
2-1074 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show time show time T o display the curren t time of day in the system clo ck, use the show time command.
2-1075 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s sho w t imezo ne show timezone T o disp lay th e curr ent time zone and o ff set, us e the show ti mezone comman d.
2-1076 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show top show top T o start the T opN proces s, use the show top comman d.
2-1077 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show top Usage Guid el i nes Y ou can ter minat e T opN pro cesses wit h the background option spec ified only by using the clea r top [ r e port_ num ] command .
2-1078 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show top rep ort show top re port T o list all T opN processes and specif ic T opN reports, use the show top r eport comm and.
2-1079 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show top r eport This exampl e shows ho w to disp.
2-1080 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show traff i c show traffic T o displa y traf fic and peak inform ation, use the show traffic command .
2-1081 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s sho w tr unk show trunk T o display trunking inform ation for the switch, use the sho w trunk co mman d.
2-1082 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show trunk Exam ples Th is example sh ows how to dis.
2-1083 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s sho w tr unk Port Vlans allowed and active in man.
2-1084 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show ud ld show udld T o display UDLD informatio n, use the show udld co mmand. show udl d show udl d port [ mod [ /port ]] Syntax D escr i pti on Defaults Thi s command has no de fa ult set tings.
2-1085 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s s h ow udld Ta b l e 2 - 9 5 descri bes the f ields in t he show udld comman d outpu t.
2-1086 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show users show us ers T o show if the console por t is acti ve and to list all acti ve T elnet sessions with th e IP address or IP alias of the originatin g host, use the show use rs comma nd.
Chapter 2 Catalyst 6 500 Series Swi tch and ROM M onitor Commands show ve rsion 2-1087 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 22 show version T o display so ftware, h ardwar e, and web in terfa ce versio n informa tion, use the show ve r s i o n co mm and .
2-1088 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show vers ion DRAM FLASH NVRAM Module Total Used Fre.
2-1089 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show version Ta b l e 2 - 9 6 descri bes the f ields in t he sh ow ve r s io n comma nd output .
2-1090 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show vlan show vlan T o display VLAN inform ation, use the show vlan comm and.
2-1091 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show v lan 10 VLAN0010 active 18 6/1,6/3 11 VLAN0.
2-1092 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show vlan This exam ple sh ows how to displa y inf o.
2-1093 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show v lan This exam ple shows how to di spla y a.
2-1094 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show vlan Relat e d Commands set trunk set vlan show trunk Second ary-T ype T y pe of second ary VLAN port.
2-1095 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show vlan count ers show vlan cou nters T o displa y counte rs for al l VLANs or a range of VLANs, use the s how vlan count ers comman d.
2-1096 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show vlan counte rs Relat e d Commands clear vl an counters L3-O ut-N onUn ica st-Pkts La yer 3 non unic as t packets for warde d pe r outpu t VLA N.
2-1097 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show vmps show vmps T o di splay V MPS c onfigura tion i nfor mat ion, use the show vmps command . show vmps [ noalias ] Syntax Descript ion Defaults Thi s command has no de fa ult set tings.
2-1098 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show vm ps Relat e d Commands download set vmps server set vmps st ate State Sta tus on whether VMPS is enabled or disabl ed.
2-1099 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show v mp s mac show vmps mac T o disp lay the MA C-addr ess-to-VL AN mappin g tabl e, use the show vmps mac command.
2-1100 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show vm ps statistic s show vmps statistics T o display the VMPS statistics, u se the show vmps statistics command.
2-1101 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show vmps statis tics Relat e d Commands clear vm.
2-1102 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show vm ps vlan show vmps vlan T o displa y all the MA C addresses assigned to a VLA N in the VMPS table, us e the sho w vmps vlan comm and.
2-1103 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show vtp domain show vtp domain T o display VTP domain informati o n, use the show vtp domain comman d.
2-1104 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show vtp do main Relat e d Commands set vtp show vtp statistics Vlan-c ou nt T ota l nu mbe r of V LANs i n the dom ai n.
2-1105 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s show vtp stati stics show vtp statisti cs T o display VTP statistics, use th e s how vtp st atist ics command.
2-1106 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands show vtp s ta tistics Relat e d Commands clear vt p statistic s set vtp No of con fig revision errors Nu mber of conf ig re vision errors .
2-1107 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s slip slip T o attach or detach Se rial Line Internet Protocol (SLI P) for the co nsole port , use the slip command.
2-1108 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands squeeze squeeze T o d el et e Fl ash fil es pe rm an en tly , use th e squeeze command. squeeze [ m/ ] de vice : Syntax D escr i pti on Defaults Thi s command has no de fa ult set tings.
Chapter 2 Catalyst 6 500 Series Swi tch and ROM M onitor Commands stack 2-1109 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 22 stack T o dump a st ack trace of fram es, use the stack co mmand . stack [ -d | - m ] [ num ] Syntax Descript ion Defaults The d ef ault for num is f ive frames.
2-1110 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands switch switch T o swi t ch the c lock f rom the super vi sor cl oc k to th e inte rn al c l ock or fr om th e a ctive supervisor engi ne to the stan dby supervis or engine , use the switch comm and.
2-1111 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s switch console switch console T o swi tch the c onsol e con nection physic ally to t he MSFC on the active supervisor engine , use t he switch consol e command.
2-1112 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands switch fa bri c switch fabric T o reset th e acti ve Switch F abric Module and allo w the standb y Switch Fa b ric Module to take ov e r, use the switch fabric command .
2-1113 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s sync sync T o write th e workin g in-cor e copy o f en vironment v ariables and th e aliases o ut to NVRAM so the y are read on the ne x t reset, use the sync comman d.
2-1114 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands sysre t sysret T o display the return informatio n from the last booted system image, use the sysret com mand.
2-1115 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s tel net telnet T o star t a T elnet connec tion to a remot e host , use the telnet command. teln et ho st [ port ] Syntax Descript ion Defaults Thi s command has no de fa ult set tings.
2-1116 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands test cab le-diagn osti cs test cable-d iagnostics T .
2-1117 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s test cable-diagnostics Exam ples Th is example sh.
2-1118 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands test sn mp tr ap test snmp trap T o send an SNMP trap message to the trap recei vers, use the test snmp trap co mman d.
2-1119 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s t rac erout e traceroute T o di splay a h op- by-hop pa th th rough an I P net work f rom th e Catal yst 6500 se ries swit ch t o a spe ci fic destinati on ho st, use the tracer oute co mmand.
2-1120 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands tracerou te Usage Guid el i nes T o i n te rr up t tr aceroute after the co mmand h as be en issu ed, p ress Ct rl-C .
2-1121 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s t rac erout e Ta b l e 2 - 1 0 5 describes the fiel ds in the trac er oute comm an d o ut pu t.
2-1122 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands unalias unalias T o remov e the alias name and as sociated value from the alias list, us e the unalias comman d.
2-1123 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s undel ete undelete T o recover a delete d file on a Flash memo ry device, use the undelete comman d.
2-1124 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands unse t=varnam e unset=v arname T o remov e a variab le name from the v ariable list, use the unset= varname command.
2-1125 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s varname= varname= T o set the v ariable VA R N A M E to varv alue , use the varnam e= command. No te that th e syntax va rnam e = sets the variab le to a NUL L string.
2-1126 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands verif y verify T o co nf irm the checksum o f a f ile on a Fla sh de vice, use the verify command .
2-1127 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s wait wait T o cau se the C LI to pause for a sp ecif ied nu mber of se conds b efore execu ting t he next command, use the wait comman d.
2-1128 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands whichb oot whichboot T o determine wh ich file booted, use the whichboot command . whichboot Syntax D escr i pti on This comm and ha s no a rgume nts o r keywords.
2-1129 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s write write T o uplo ad the cu rren t configuratio n to the ne twork or di splay the configur ation inf orma tion cu rrently i n running m em ory , u se t he write comm and.
2-1130 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands write Exam ples Th is example sh ows how to upload the syste m5 .
2-1131 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s write This exam ple sh ows how to uploa d t he ru nni ng syst em configu ratio n to a pre spe cified loc ation : Console> (enable) write memory Upload configuration to bootflash:switch.
2-1132 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands write tech -suppo rt write tech-sup port T o gen er .
2-1133 Catalyst 6500 Series Switch Command Refer ence—Release 7.6 78-15328-01 Chapter 2 Cataly st 65 00 Series Swi tc h an d ROM Mo nitor Com mand s write tech-support Note I f y o u a re u pl o a d.
2-1134 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15328-01 Chapter 2 C atalyst 6500 Serie s Switch and ROM Monitor Commands write tech -suppo rt • show pr oc mem • show pr .
A- 1 Catalyst 6500 Series Switch Command Reference—Release 7.6 78-15328-01 APPEND IX A Acronyms T able A-1 d ef ines the ac ronyms used in this p ublication .
A- 2 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15474-01 Appendix A Acronyms CPLD Comple x Pr ogra mma ble L ogic De vice CRC cyclic redunda ncy check CRF concentrato r relay f.
A-3 Catalyst 6500 Series Switch Command Reference—Release 7.6 78-15474-01 Appendix A Acronyms IETF Internet Engine ering T ask For ce IDP initial domain part IDSM I ntrusion D etection System M odul.
A- 4 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15474-01 Appendix A Acronyms MTP Media T ermination Point MTU maximum tra nsmission unit MV AP multiple VLAN access port N AM Ne.
A-5 Catalyst 6500 Series Switch Command Reference—Release 7.6 78-15474-01 Appendix A Acronyms rcp Re mote Copy Prot ocol RGMP Router-Ports Gro up Manageme nt Protocol RIF Routing In fo rma tion F ie.
A- 6 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 7.6 78-15474-01 Appendix A Acronyms U AR T Un i versal Asynch ronous Recei ver/T ransmitter UDLD UniDirectional Link Detection UDLP Uni.
IN-1 Catalyst 6500 Series Switch Command Reference—Release 7.6 78-15328-01 INDEX Symbols ? (help) comm an d c om ple ti o n 1-11 displaying ma tc hes 1-11 switch CLI 1-9 Numerics 3DES keys defining 2-313 removi ng 2-39 802.
Index IN-2 Catalyst 6500 Series S witch Command Reference—Release 7.6 78-15328-01 Address Reco gniti on Protocol See ARP ta b le adj acen cy displaying PBF infor mation 2-843 aggreg ate rate limit c.
Inde x IN-3 Catalyst 6500 Series Switch Command Reference—Release 7.6 78-15328-01 cleari ng NAM boot stri ng 2-11 configurin g auto-config file 2-226 displaying N AM boot string 2-673 setting IDS en.
Index IN-4 Catalyst 6500 Series S witch Command Reference—Release 7.6 78-15328-01 comm an d al ias es 1-8 comm an d h elp 1-9 comman d-l ine p roce ssing 1-3 comm an d m od es 1-3 console p ort 1-2 .
Inde x IN-5 Catalyst 6500 Series Switch Command Reference—Release 7.6 78-15328-01 setting 2-12 configuration register ut ility config uring 2-145 console setting port baud rate 2-613 switching conso.
Index IN-6 Catalyst 6500 Series S witch Command Reference—Release 7.6 78-15328-01 setting action superviso r engine takes after test failure 2-636 setting level 2-637 system 2-1069 disabling mod ule.
Inde x IN-7 Catalyst 6500 Series Switch Command Reference—Release 7.6 78-15328-01 enviro nment displaying inl ine p ow er sta tus 2-720 displaying system status inf ormation 2-720 EPLD config uring .
Index IN-8 Catalyst 6500 Series S witch Command Reference—Release 7.6 78-15328-01 General Att ribute Re gistratio n Protocol See GARP GMRP clearing statistics inf ormation 2-25 disabling Forw ard Al.
Inde x IN-9 Catalyst 6500 Series Switch Command Reference—Release 7.6 78-15328-01 displaying sta tus 2-720 inst ance s assigni ng port path co st 2-594 displaying BPDU sk ew status 2-1023 displaying.
Index IN- 10 Catalyst 6500 Series S witch Command Reference—Release 7.6 78-15328-01 clear ing Kerber os real m to DNS domain na me map 2-37 clea ring secr et ke y 2-39 clearin g speci fic Kerbero s .
Inde x IN- 11 Catalyst 6500 Series Switch Command Reference—Release 7.6 78-15328-01 MAC c oun ters clearin g 2-21 displaying 2-782 displaying c hanne l po rt ut ilizat ion 2-697 restorin g 2-191 mac.
Index IN- 12 Catalyst 6500 Series S witch Command Reference—Release 7.6 78-15328-01 enabling per- prefix statistics for all FI B entries 2-341 exclu ding Laye r 4 ports in a load-b alanc ing hash 2-.
Inde x IN- 13 Catalyst 6500 Series Switch Command Reference—Release 7.6 78-15328-01 See MDG Multipl e Spannin g Tree See MST N NAM cleari ng NAM boot stri ng 2-11 clearing pa ssword 2-63 disabling S.
Index IN- 14 Catalyst 6500 Series S witch Command Reference—Release 7.6 78-15328-01 peak displaying i nform ation 2-1080 per port utilizati on disabling st atistics da ta export 2-484 displaying pa .
Inde x IN- 15 Catalyst 6500 Series Switch Command Reference—Release 7.6 78-15328-01 powering m odule 2-356 power redun dancy turnin g redundan cy betwee n power sup plies on or off 2-439 power suppl.
Index IN- 16 Catalyst 6500 Series S witch Command Reference—Release 7.6 78-15328-01 mappi ng IP preced ence-to- DSCP 2-467 returnin g to fac tory -set Co S de fault s 2-73 returni ng to factory-set .
Inde x IN- 17 Catalyst 6500 Series Switch Command Reference—Release 7.6 78-15328-01 setting attribu tes in access requests 2-494 setting deadtime 2-495 setting encry ption and authentica tion 2-496 .
Index IN- 18 Catalyst 6500 Series S witch Command Reference—Release 7.6 78-15328-01 S securit y access lists See se curity ACL security ACL clearin g changes fr om edit buf fer 2-192 committing to N.
Inde x IN- 19 Catalyst 6500 Series Switch Command Reference—Release 7.6 78-15328-01 displaying snm pN otify Tabl e c onf igur ation 2-1001 displaying t arge t a ddres s e ntrie s 2-1004 displayi ng .
Index IN- 20 Catalyst 6500 Series S witch Command Reference—Release 7.6 78-15328-01 displaying V LAN infor mation 2-1014 displaying VLA N p ath cost 2-1040 enab lin g 2-566 enab lin g B ac kb one Fa.
Inde x IN- 21 Catalyst 6500 Series Switch Command Reference—Release 7.6 78-15328-01 Telne t 1-2 swit ch fabr ic channel displayi ng c oun ter info rm ati on 2-727 displaying sw itch mo de a nd statu.
Index IN- 22 Catalyst 6500 Series S witch Command Reference—Release 7.6 78-15328-01 disabling supp ression of a ccounting in formati on 2-199 disabling TA CACS+ d ire cte d-req ue st op tio n 2-632 .
Inde x IN- 23 Catalyst 6500 Series Switch Command Reference—Release 7.6 78-15328-01 traps displaying st atus inf orma tio n 2-911 trunk clearin g VLAN from allowe d VLAN list 2-129 displaying inform.
Index IN- 24 Catalyst 6500 Series S witch Command Reference—Release 7.6 78-15328-01 mappin g res er ved VL ANs to n onr es er ved VLANs 2-652 VTP confi gurat ion cauti on 2-130 VLAN ACL See VACL VLA.
Inde x IN- 25 Catalyst 6500 Series Switch Command Reference—Release 7.6 78-15328-01.
Een belangrijk punt na aankoop van elk apparaat Cisco Systems 78-15328-01 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Cisco Systems 78-15328-01 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Cisco Systems 78-15328-01 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Cisco Systems 78-15328-01 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Cisco Systems 78-15328-01 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Cisco Systems 78-15328-01 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Cisco Systems 78-15328-01 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Cisco Systems 78-15328-01 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.