Gebruiksaanwijzing /service van het product OL-6244-01 van de fabrikant Cisco Systems
Ga naar pagina of 1438
Corporate He adquarters Cisc o Syst ems , Inc . 170 West Ta sman Drive San Jos e, CA 95 134-1706 USA http://www.ci sco.com Tel: 408 526-4000 800 553- NETS (638 7) Fax: 408 526-4100 Catalyst 650 0 Series S w itc h Command Reference R ele ase 8 .
THE SPECIFICATIONS AND INFORMATION REG ARDING THE PRODUCTS IN THIS MANUAL ARE SUBJECT TO CHANGE WITHOU T NOTICE. ALL STATEMENT S, INFORMATI ON, AND RECOMMENDA TIONS IN T HIS MANUAL ARE BELIEVED TO BE ACCURATE BU T ARE PRESEN TED WITHOUT WARRANTY OF ANY KIND, EXPRE SS OR IMPLIED.
iii Catalyst 6500 Series Switch Command Reference—Release 8.4 OL-6244-01 CONTENTS Preface xx ix Audienc e xxix Organi zation xx ix Relat ed D ocum ent atio n xxix Conv enti ons xxx Obtain ing Documentati on xxxi Cisco.
Cont ents iv Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 clear ba nne r mo td 2-12 clea r bo o t au to -c onf ig 2-13 clea r bo o t de vi ce 2-14 clea r bo o t sy st em .
Content s v Catalyst 6500 Series Switch Command Reference—Release 8.4 OL-6244-01 clear l acp-channe l statis tics 2-53 clear lda 2-5 4 clear loca lus er 2-56 clear log 2-5 7 clea r log com mand 2-58.
Cont ents vi Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 clea r po r t co ps 2-95 clea r po r t ho st 2-96 clea r po r t qo s au to qos 2-97 clea r po r t qo s co s 2-9 .
Content s vii Catalyst 6500 Series Switch Command Reference—Release 8.4 OL-6244-01 clea r snm p g rou p 2-139 clear snm p ifa lias 2-1 40 clear snm p in form 2-141 clea r snm p n otif y 2-142 clea r.
Cont ents viii Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 clea r vt p sta tis tics 2-180 commit 2-181 commit lda 2-183 confi gure 2-184 confre g 2-186 contex t 2-188 co.
Content s ix Catalyst 6500 Series Switch Command Reference—Release 8.4 OL-6244-01 set acco unting connect 2-241 set acco unting exec 2-242 set acco unting suppres s 2-244 set acco unting system 2-24.
Cont ents x Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 set cops 2-30 0 set cr y pt o ke y rs a 2-302 set d efa ult portstat us 2-303 set d hcp -snooping 2-304 set d o t.
Content s xi Catalyst 6500 Series Switch Command Reference—Release 8.4 OL-6244-01 set ip alia s 2-353 set ip dns 2-354 set ip dn s domain 2-355 set ip dn s server 2-356 set ip fr agmentation 2-357 s.
Cont ents xii Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 set lo ggin g lev el 2-397 set log ging server 2-400 set log ging session 2-402 set lo g ging telnet 2-403 set .
Content s xiii Catalyst 6500 Series Switch Command Reference—Release 8.4 OL-6244-01 set pass word 2-448 set pbf 2-449 set pbf ar p-inspecti on 2 -451 set pb f cl ient 2-452 set pb f gw 2- 454 set pb.
Cont ents xiv Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 set po rt n am e 2-512 set po rt n ego tiat ion 2-513 set po rt p rot oco l 2-514 set po rt q os 2-51 6 set po .
Content s xv Catalyst 6500 Series Switch Command Reference—Release 8.4 OL-6244-01 set qo s dr op-threshol d 2-571 set qos ds cp-cos-map 2 -573 set qo s ds cp-mutatio n- m ap 2-574 set qos ds cp-muta.
Cont ents xvi Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 set se cur ity acl f eat ure ra teli mit 2-6 23 set s ecurity acl ip 2-624 set s ecurity acl ip x 2-630 set s e.
Content s xvii Catalyst 6500 Series Switch Command Reference—Release 8.4 OL-6244-01 set s pan tree enable 2-686 set sp ant ree fwd del ay 2-688 set sp an tree global-d efault 2-690 set s pan tree gu.
Cont ents xviii Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 set syst em highavailab ility 2-741 set syst em highavailab ility ver sioning 2-74 2 set s yst em info-log 2-.
Content s xix Catalyst 6500 Series Switch Command Reference—Release 8.4 OL-6244-01 show acc ounti ng 2-794 show acll og 2-797 show acl mac- pac ket- class ify 2-798 show acl merg e alg o 2 -799 show.
Cont ents xx Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 show dhcp- snooping confi g 2-859 show dhcp- snooping st at istics 2-8 60 show dot1q -all-tagge d 2-861 show dot.
Content s xxi Catalyst 6500 Series Switch Command Reference—Release 8.4 OL-6244-01 show ip ht tp 2-91 8 show ip pe rmi t 2-920 show ip r oute 2-92 2 show kerb eros 2- 924 show l2pr otocol- tunnel st.
Cont ents xxii Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 show mls net flow-ro ute 2-987 show mls pbr -route 2-9 88 show mls s tat istic s 2-989 show mls ver ify 2-994 .
Content s xxiii Catalyst 6500 Series Switch Command Reference—Release 8.4 OL-6244-01 show port dot1q-et hertype 2-10 63 show port dot1qtun nel 2-1064 show por t do t1x 2-106 5 show port errd isab le.
Cont ents xxiv Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 show pvla n capability 2-1125 show pvla n mapping 2-1127 show qos acl editbuf fer 2-11 29 show qos acl info 2-.
Content s xxv Catalyst 6500 Series Switch Command Reference—Release 8.4 OL-6244-01 show snmp acce ss- list 2-11 88 show snmp buf fer 2 -1189 show snmp commu nity 2-1190 show snmp co ntex t 2-1192 sh.
Cont ents xxvi Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 show ssh 2-1254 show star tup- con fig 2- 1255 show summerti me 2-1258 show syst em 2-1259 show syst em health.
Content s xxvii Catalyst 6500 Series Switch Command Reference—Release 8.4 OL-6244-01 sta ck 2-1318 switc h 2-1319 swit ch consol e 2-1320 swit ch fabri c 2-1321 sync 2-13 22 sysret 2-1323 tclqui t 2.
Cont ents xxvii i Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01.
xxix Catalyst 6500 Series Switch Command Reference—Release 8.4 OL-6244-01 Preface This pr efa ce d escri b es t he a udie nce, o rganizatio n, an d co nv en tion s o f thi s pu bli cati on and p rovid es information on how to obtain relate d documentation.
xxx Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Preface Conv entions • A TM Software Configuration Guid e and Com mand Re ference for the Catalyst 5000 F amily a nd 6500 Series Switches • Release Notes for Catalyst 6500 Series For information about M IBs, refer to this URL: http://www .
xxxi Catalyst 6500 Series Switch Command Reference—Release 8.4 OL-6244-01 Pre face Obtaining Docume ntation Obtaining Documentation Cisco d ocume nta tio n an d a dd ition al lite rat ure a re available on Ci sco. co m. Cisco al so pr ovides s ev eral ways to obtain tec hnic al assist anc e an d other te chni cal re source s.
xxxii Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Preface Obtain in g Technical Assis ta nce Obtaining Tech nical Ass istanc e For all customers, par tners, re sellers, .
xxxii i Catalyst 6500 Series Switch Command Reference—Release 8.4 OL-6244-01 Pre face Ob ta ining Additional Publications and Information Definitions of Service Request Severity T o ensure th at all servi ce request s are report ed in a stand ard format , Cisco has established se ver ity def init ions .
xxxiv Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Preface Obtainin g Addi ti ona l Publicat io ns and Info rmatio n • Int ernet Pr otoc ol J ournal is a quarte rly jou.
C HA PTER 1-1 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 1 Command-Line Interface s This chapt er desc ribes the c ommand- line inte rfaces (CL I) av ailab le on the Catal.
1-2 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands Switch CLI Accessing the Switch C LI via the Console Port.
1-3 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Seri es Switch an d ROM Mo nitor Comm and s Switch CLI Operating the Switch CLI This secti on describe s command modes and functions tha t allow you to operate the switch CLI.
1-4 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands Switch CLI Using the Command-Line Editing Features Cataly.
1-5 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Seri es Switch an d ROM Mo nitor Comm and s Switch CLI In the follo wing e xample, when you enter th.
1-6 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands Switch CLI Deleti ng Entrie s Perform on e of thes e task.
1-7 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Seri es Switch an d ROM Mo nitor Comm and s Switch CLI Redisplayi ng the Current Command Line If you ente r a comma nd and the syst em suddenl y sends a message to your scre en, you can recall you r curr ent co mman d line en tr y .
1-8 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands Switch CLI Using Command Aliases Like regular com mands , alia ses are no t case se nsitive. Ho we ver , unlike regular command s, some aliases cannot be abbreviat ed.
1-9 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Seri es Switch an d ROM Mo nitor Comm and s Switch CLI Accessing Command He lp T o see a list of top-le vel comma nds and comm and cate gori es, type help i n norma l or p ri vileg ed mo de.
1-10 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands Switch CLI session Tunnel to ATM or Router module set Se.
1-11 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Seri es Switch an d ROM Mo nitor Comm and s Switch CLI Y ou c an designa te por ts by entering t he modu le and port num ber p airs, separa ted by com mas.
1-12 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands Switch CLI Using Command Self-Repeat Use the com mand self -r epea t functi on to display matches to all possible keywords if a st ri ng repres ents a unique match.
1-13 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Seri es Switch an d ROM Mo nitor Comm and s Switch CLI Using the CL I String Search The pat tern in the comm and output is refer red to as a str ing.
1-14 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands Switch CLI T o enter th ese spe cial char acters as sing le-cha racter pattern s, remo ve the spec ial meaning b y prece ding each ch aracter with a backsl ash ().
1-15 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Seri es Switch an d ROM Mo nitor Comm and s Switch CLI Multiple- Character Pat terns When crea ting re gular e xpressions, you c a n also specify a p attern co ntaining multip le charac ters.
1-16 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands Switch CLI T o use multiplier s with multiple-char acter patterns, you encl ose the pattern in parenth eses.
1-17 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Seri es Switch an d ROM Mo nitor Comm and s ROM Moni tor CLI For exam pl e: _1300_ matc hes an y stri ng that has 1300 some where i n the s trin g. The string’ s 1300 ca n be prec eded b y or end with a spa ce, br ace, or comm a.
1-18 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands ROM Moni to r CLI The manu al bo ot command ha s the following syntax: Note En te r t he copy file-id { tftp | flash | fil e- id } co mma nd to obt ai n an ima ge f ro m t h e ne twork .
C HA PTER 2-1 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 2 Catalyst 6500 Series Switch and ROM Monitor Commands This chap ter co ntain s an alpha betica l listin g of all switc h and R OM monitor comman ds a v ail abl e on the Catalyst 6500 series switches.
2-2 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands alias alias T o set and display command aliases, use the alias command. alias [ name = value ] Syntax D escr i pti on Defaults Thi s command has no de fa ult set tings.
2-3 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Seri es Switch an d ROM Mo nitor Comm and s alias k=stack s=set rommon 4 > s PS1=rommon ! > BO.
2-4 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands boot boot T o b oot up an extern al proc es s, use t he boot co mman d. boot [ -x ] [ -v ] [ device : ][ imagename ] Syntax D escr i pti on Defaults Thi s command has no de fa ult set tings.
Chapter 2 Catalyst 6500 Series Sw itch and ROM Monitor Comm ands cd 2-5 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 22 cd T o s et the default Fla sh device for t he sy stem , use t he cd comm and. cd [[ m/ ] de vice : ] Syntax Descript ion Defaults The de fault Flash device is bootfl ash.
2-6 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands clear acl lo g clear acllog T o disable A CL log rate limiting, use the clear ac llog command. clear ac llog Syntax D escr i pti on This c omm and ha s no a rgument s o r keywords.
2-7 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s clear a cl mac-pac ket-cl assify clear acl mac-p acket-c lassify T o match only MA C packets with MA C A CLs, use the clear ac l mac- packet -cl assi fy command.
2-8 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands clear alias clear alias T o clear the ab bre viated ve rsions of com mands, us e the clea r alias comm and.
2-9 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s clea r ar p clear arp T o delete a specif ic entry or all entries from the ARP table, use the cl ear arp comman d.
2-10 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands clear arp Relat e d Commands set arp show arp.
2-11 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s clea r au to sh ut clear autoshut T o clear the runt im e counters or re set the automatic module shut down settings to the d efault settings, use the cle ar autoshut command.
2-12 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands clear bann er motd clear banner motd T o cl ear the me ssag e-of- the -day ba nner, use the clear banner motd command .
2-13 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s clea r boot au to-conf ig clear boot auto-conf ig T o .
2-14 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands clear boot dev ice clear boot device T o clear the conten ts of th e CONFIG _FILE enviro nment variabl e used to specify t h e NAM s tartup configuratio n files, use the clea r boot device comma nd .
2-15 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s clea r boot system clear boot system T o cl ear the co nt ents of the B OOT e nvir onmen t vari abl e a nd the conf i gurat ion re giste r sett ing, u se t he clear boo t syste m command.
2-16 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands clear cam clear cam T o delete a specif ic entry or all entries from the CAM table, use the cl ear cam command .
2-17 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s clea r cam monit or clear cam monitor T o clear th e config uration f or the MA C-addre ss limits and a ctions, use th e clear cam monito r co mmand .
2-18 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands clear cam no tificat io n clear cam notification T o clear th e CAM notif icati on counter s and hi story log, use the cl ear cam notif ication comman d.
2-19 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s clear channel st atisti cs clear channel sta tistics T o clear P AgP statistica l inform ation, use t he clear channel statistics comm and.
2-20 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands clear conf i g clear config T o clear the system or module conf iguration information stored in NVRAM, u se the clear c onfig comm and.
2-21 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s clear config This exam ple shows how to de lete the co.
2-22 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands clear conf i g checkp oint clear confi g checkpoint T o clear all checkp oint co nfiguration files or a parti cular configura tion che ckpoin t fi le, use the clear conf ig checkpoint command.
2-23 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s clear config pv lan clear config pvlan T o cle ar all priv ate VL AN configurat ions in the syst em inclu ding port mappings, use the c lea r con fig pvlan comm and.
2-24 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands clear cops clear cops T o cl ear Comm on Op en Po licy Se rvi ce ( CO PS) co nfigurat ions, us e t he c lea r cops command .
2-25 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s clea r co ps This e x ample sho ws how to clea r all COPS serv ers: Console> (enable) clear cops server all All COPS servers cleared.
2-26 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands clear coun ters clear counters T o cle ar MAC counters, Ethe rCh annel MAC counters, por t count ers, a nd th e cha nnel tra ff ic percen til e, use the clea r counters co mmand.
2-27 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s clea r count ers Exam ples Th is example shows ho w t .
2-28 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands clear cry pto key rsa clear crypto key rsa T o remov e all RSA public-ke y pairs, use the c lear crypto k ey rsa command .
2-29 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s clear d hcp-snoop ing bindi ngs clear dhcp-sno oping bind ings T o cle ar D HCP sn oop ing bindin g ta ble ent ries, use t he clear dhcp-snooping bindings co mman d.
2-30 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands clear dhcp -snoo pin g bindings Relat e d Commands show .
2-31 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s clear dhcp-snoo ping statistics clear dhcp-sno oping statisti cs T o clear DHCP snooping statistics, use the cl ear dhcp-sn ooping st atisti cs comm and.
2-32 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands clear dot 1x config clear dot1x config T o disable 8 02.1X on a ll ports and retur n v alues to th e defa ult settin gs, use th e clear dot1 x conf ig comm and.
2-33 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s clea r dot1x vla n-group clear dot1x vlan-gro up T o cl ear a VL AN fr om a VLA N g rou p, use th e clear dot1 x vlan-gr oup command .
2-34 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands clear dot 1x vlan-g roup Relat e d Commands set dot1x sh.
2-35 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s clear ftp clear ftp T o clea r File T ransf er Prot ocol ( FTP) paramete rs, use the clear ftp comman d.
2-36 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands clear gmrp s tatistic s clear gmrp statistics T o clear all the GMRP stati s tics infor ma tion f rom a specif ied VLAN or all VLA Ns, use th e clear gmrp statistics command.
2-37 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s clear gvrp stati stics clear gvrp s tatistics T o clear all the GVRP statis tics info rmation , use the clea r gvrp statistics comma nd.
2-38 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands clear igmp stat is ti cs clear igmp statistics T o cl ear IGMP snoopi ng stati sti cal in form a tion, use the clear igmp statistics command .
2-39 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s clear ip alias clear ip alias T o clear IP al iases that were s et using the set ip alias command , use the clear ip alias command .
2-40 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands clear ip dn s domai n clear ip dns domai n T o clear the de fault DNS domain na me, use the cle ar ip dns domain command.
2-41 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s clear ip dns server clear ip dns server T o remov e a DNS server from the DNS serve r listing, use the clea r ip dns serv er comman d.
2-42 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands clear ip pe rm i t clear ip permit T o remov e a specifi ed IP address and mask or all IP addresses and masks from the permit list, use the clear ip permit comman d.
2-43 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s clear ip pe rmi t Console> (enable) clear ip permit all IP permit list cleared. WARNING IP permit list is still enabled.
2-44 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands clear ip ro ute clear ip route T o delete IP routi ng table entries, use the clear ip r oute command . clear ip r oute destination gat eway Syntax D escr i pti on Defaults The defau lt is destination .
2-45 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s clear k erberos cli ents mandatory clear kerberos clients man datory T o disable mandatory Kerb eros authentica tion for services on the network, use the clear k erber os clients mandatory comm and.
2-46 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands clear kerb eros cre den tials fo rward clear kerberos credentials forward T o disa ble credent ials forw ardi ng, use t he clear ke rbero s credent ials f orward com mand.
2-47 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s clear ke rberos creds clear kerberos creds T o de lete all t h e K erberos cr edentials , use t h e c lear kerbe ros cr eds command.
2-48 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands clear kerb eros rea lm clear kerberos realm T o clea r a n en try t hat m aps the n ame of a K er beros rea lm to a D NS do main na me or a h ost name , us e the clea r ke r b eros rea lm command.
2-49 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s clear ker ber os se rv er clear kerberos server T o clea r a s pecifi ed Ke y Distrib ution Center (KDC) entry , use the clea r kerbe ros serv er command.
2-50 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands clear key conf ig-ke y clear key config-key T o remo ve a pr i v ate 3DES key , use the cle ar key config-k ey comma nd.
2-51 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s clear l2proto col-tu nnel cos clear l2protoco l-tunnel c os T o cl ear the L a yer 2 p rotoc ol tunne ling CoS value fo r all i ng ress tu nne ling por ts, use the c lea r l2protocol-tunnel c os command.
2-52 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands clear l2prot ocol- tun nel stat istics clear l2protoco l.
2-53 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s clea r lacp-cha nnel stat istics clear lacp-channel statistic s T o clea r Link Aggr egation Control Protocol (LA CP) statistical informa tion, use the clear lacp-channe l statistics command.
2-54 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands clear lda clear lda T o remove the ac celerated serve r load balanc ing (A SLB) multi layer swit ching (MLS ) entrie s or MA C addresses fro m the switch, use the clear l da command.
2-55 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s clear lda Usage Guid el i nes This c omm and is suppor ted on ly o n sw itc he s configu red w ith th e Supe r visor En gine 1 wi th L aye r 3 Switching Engine WS-F6K-PFC (Pol icy Feature Card) .
2-56 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands clear loc aluse r clear localuser T o delete a loca l user a ccount f rom the switch, use the clear localuser comman d.
2-57 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s clear log clear log T o delet e module , system error log, or dump l og entri es, use the clea r log co mmand .
2-58 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands clear log com m a nd clear log comma nd T o clear the command log entry table, u s e t h e clear l og command co mmand.
2-59 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s clear logging buffer clear loggi ng buffer T o clear the s ystem logg ing bu f fer , use the clear lo gging buffer command.
2-60 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands clear log gi ng callhom e clear logging cal lhome T o retore the CallHome def ault values or to clea r a d estination addr ess used in the CallHom e feature, use the cle ar loggi ng callhome command .
2-61 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s clear logging callhome Relat e d Commands clear loggin.
2-62 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands clear log gi ng callhom e from clear loggi ng callhome fro m T o clear the Fro m addres s used by the CallHom e feature, u se the clea r logging callhome from comm and.
2-63 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s clear logging callhome r eply-to clear loggi ng callhome re ply-to T o clea r the Reply- to add ress u sed b y the Cal lHome f eature, use the clear lo gging callho me reply -to comm and.
2-64 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands clear log gi ng callhome severit y clear logging cal lho.
2-65 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s clear logging callhome sm tp-ser ver clear logging cal lhome smtp -server T o clear an SMTP ser ver f rom the list of Ca llHome SMTP serv ers, use the clear logg ing callhome smtp- server command.
2-66 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands clear log ging leve l clear logging leve l T o reset the logging le vel for a facility or fo r all f acilities to their default sett in gs, use the cl ear logg ing lev el command.
2-67 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s clear loggi ng level Defaults Thi s command has no de fa ult set tings. Comma nd T ypes Swit ch co mman d.
2-68 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands clear log gi ng server clear logging server T o delete a syslog se rver from the sy stem log server tabl e, us e the clear logging ser ver command.
2-69 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s clea r mls cef clear mls cef T o cl ear Cisco Ex pre ss Forwarding ( CEF) summ ar y s tati stics , use the clear mls cef com mand.
2-70 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands clear mls cef rpf statistic s clear mls cef rpf statistics To clear the coun ters for packets and bytes that failed the h ardware RPF check, use the clea r mls cef rpf statist ics command.
2-71 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s clea r ml s ent ry clear mls entry T o clea r MLS entr ies in the Cata lyst 6500 series switches , use the cl ear mls entry co mmand.
2-72 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands clear mls ent ry Up to 16 routers can be included e xplicitly as MLS-RPs.
2-73 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s clear mls entry cef clear mls entry ce f T o clear CEF adjacen cy statistics, u se the clear ml s entry cef command .
2-74 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands clear mls excl ude pro tocol clear mls exclude protocol .
Chapter 2 Catalyst 6500 Series Sw itch and ROM Monitor Comm ands clear mls multicast statistics 2-75 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 22 clear mls multicast statistics T o remov e ML S multicast sta tistics main tained b y the MSFC o n the switc h, use the clea r mls multicast statistics command .
2-76 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands clear mls nde clear mls nde T o cl ear p ri mary an d se cond ar y ND E co lle ctor de stin ati on s and t o d isab le N DE, use the clear mls nde comm and.
2-77 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s clear mls nd e flow clear mls nde flow T o reset t he NDE f ilters in the Catalyst 6500 series swit ches, use t h e clea r mls nde flow com mand.
2-78 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands clear m ls st atistics clear mls statistics T o clear har dware -instal led MLS statist ics entri es, use the cl ear mls stat istics co mmand.
2-79 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s clear mls st atistics This exampl e shows ho w to clea.
2-80 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands clear m ls st atistics entry clear mls statistics en try T o clear statistics for MLS entries, use the clea r mls s tatist ics entr y command.
2-81 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s clear ml s statist ics entry When en ter ing th e IPX ad dress s yntax, us e the fol lowing form at: • IPX net address—1.
2-82 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands clear m odu le pass w ord clear module pa ssword T o clear the password set by the password [ usernam e ] N AM command, us e the cl ear m odu le pa sswor d comm and.
2-83 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s cle ar ms fcau to stat e clear msfcautosta te T o clear the MSFC autostate co nf iguration , use the cl ear msfcautost ate comma nd.
2-84 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands clear mult i cast route r clear multicast router T o clear manual ly config ured multicast rou ter ports from the multic ast router port list, use the clea r multicast r outer command.
2-85 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s clea r ntp serv er clear ntp server T o r e move one or m ore s erver s f rom th e NT P s erver ta ble, u s e t he c lear n tp server command.
2-86 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands clear ntp ti mezone clear ntp timezone T o return the time zo ne to its default, UTC, use the clear ntp timezone command.
2-87 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s clear pbf clear pbf T o remo ve th e MA C address for the PFC2, use the clear pbf co mmand. clear pbf Syntax Descript ion This c omm and ha s no keywords or argume nts.
2-88 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands clear pbf arp-i nspe ction clear pbf arp-inspection T o clear the ARP-inspect io n A CE from the A CL for a client list or a gate way , u se the clear pbf arp-inspection comman d.
2-89 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s clear p bf client clear pbf client T o cl ear a client or all clients from the lis t, use the clear pbf client command.
2-90 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands clear pbf gw clear pbf gw T o clear a gateway or all gateways, use the clear pbf gw command. clear pbf gw gw_ name [ ip_ad dr ] Syntax D escr i pti on Defaults Thi s command has no de fa ult set tings.
2-91 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s clear pbf-map clear pbf-map T o clear PBF map infor mation, use the clea r pbf-m ap comman d.
2-92 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands clear pbf -m ap Exam ples This example sho ws ho w to clear the A CL with the name PBF_MAP_A CL_11: Console> (enable) clear pbf-map vlan 11 ACL 'PBF_MAP_ACL_11' successfully deleted.
2-93 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s clear pbf vlan clear pbf vlan T o clear PBF-e n abled VLANs an d remo ve them from NVRA M, use the cl ear pbf vlan comman d.
2-94 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands clear port broa dcast clear port broadca st T o disable broadcas t/multicast suppression on one or more ports, use the clear port br oadcast comm and.
2-95 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s clear po rt cops clear port cops T o clear por t roles, use the clear port cops comman d. clear por t cops mod / port rol e s ro l e 1 [ ro l e 2 ].
2-96 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands clear port hos t clear port host T o cle ar the port co nfigurati on for opti mizing a hos t connec tion, use the clear port host comm and.
2-97 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s clear port qos autoqos clear port qos autoqos T o cl ear the autom atic Qo S configurat ion on a per-port ba sis, use t he c lea r port qos autoq os comm and.
2-98 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands clear port qos cos clear port qos cos T o return the v alues set by the set port qos cos command to the def ault settings for all specif ied ports, use the clea r port qo s cos co mmand .
2-99 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s clear p ort secu rity clear port security T o clear al l MA C addresses o r a s peci fic MA C addres s fr o m the lis t o f secu re MAC ad dr es ses o n a p o rt, use the clea r port securit y command.
2-100 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands clear port se curity This e xample sho ws ho w to remov.
2-101 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s clear p ort vlan-m apping clear port vlan-mapping T o cl ear the VL AN mapp ing on a per-port basis, use th e clear port vlan-mapping command .
2-102 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands clear pvl an mapping clear pvlan mapping T o d ele te a pr ivate VLAN ma ppin g, use t h e clear pvlan mapping command.
2-103 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s clea r qos acl clear qos acl T o remo ve v arious A CL conf igurati o ns, use t he clear qos acl command .
2-104 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands clear qos acl Exam ples This example sho ws ho w to de tach an A CL from all int erfaces: Console> (enable) clear qos acl map my_acl all Hardware programming in progress.
2-105 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s clea r qos acl Relat e d Commands commit ro llback se.
2-106 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands clear qos aut oqos clear qos autoqos T o return the global automatic QoS co nfigu ration t o the f actory def ault settings, use the clear qo s autoqos co mmand .
2-107 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s clear qos auto qos V arious error co nditio ns can occu r when the gl obal clea r command i s used.
2-108 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands clear qos aut oqos All ingress and egress QoS scheduling parameters set to factory default. CoS to DSCP, DSCP to COS, IP Precedence to DSCP and policed dscp maps configured.
2-109 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s clear qo s config clear qos config T o return the v a.
2-110 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands clear qos cos -cos-ma p clear qos cos-co s-map T o return the CoS-to-CoS map to the def ault setting, use the clear qos cos- cos-map command .
2-111 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s clear qos cos-dscp -map clear qos cos-dsc p-map To clear CoS-to-DSCP mappin g set by the set qos cos- dscp-map command and return to the defa ult setting, u se the c lea r qos co s-d scp-m ap command .
2-112 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands clear qos dscp-c os- map clear qos dscp-c os-map To cl .
2-113 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s clea r qos dscp-m utation -map clear qos dscp-mutati on-map T o clea r DSCP m utation mappin g, use the clear qos dscp-mutation-map comm and.
2-114 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands clear qos dsc p-mu ta tion-tab le-map clear qos dscp-mutati on-table-ma p T o clear the DSC P mutation tabl e map, use the clear qos dscp-mutation-table- map command .
2-115 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s clea r qo s ipp rec -d sc p- ma p clear qos ipprec -dscp-map T o reset the m apping set b y the set qos ipprec -dscp-map command to t he defa ult setting, u se the clear qos ippre c-dscp-map comm and.
2-116 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands clear qos m ac-c os clear qos mac-c os T o clear the v alues set by t he set qos mac-cos command, use the clear qos mac-cos co mmand.
2-117 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s clea r qo s map clear qos map T o return the v alues to the default settin gs, use the clear qos map command.
2-118 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands clear qos m ap Relat e d Commands set qos map show qos .
2-119 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s clea r qo s pol ic ed -ds c p-ma p clear qos policed -dscp-map T o reset t he police r-t o-dscp map ping table to the defa ults, use th e cle ar qos policed-dscp-map .
2-120 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands clear qos pol icer clear qos policer T o clear poli cing rules f rom N VR AM , use t he clear qos policer command.
2-121 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s clear qos polic er This exam pl e sh ows how t o clear a specif ic aggre gate polic ing rule: Console> (enable) clear qos policer aggregate my_micro my_micro QoS microflow policer cleared.
2-122 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands clear qos statis ti cs clear qos statistics T o clear QoS stati stic counte rs, use the clear qos sta tistics command.
2-123 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s clear radius clear radius T o clear one or all of th e RADIUS s erv ers from the RADI US serv er tab le or r emov e a shared k ey entry , use the clear ra dius comm and.
2-124 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands clear rcp clear rcp T o clear rcp infor mation for f ile transfe rs, use th e clear r cp comman d. clea r rcp Syntax D escr i pti on This c omm and ha s no a rgument s o r keywords.
2-125 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s clear r gmp statis tics clear rgmp statistics T o clear RGMP s tatistics informati o n for all VLANs, use the clear r gmp statist ics comm and.
2-126 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands clear sec urity acl clear security acl T o remove a sp ecific a ccess contr ol entry (ACE) or all ACEs f rom a VAC L and to de lete the VACLs from the edit buf fer , use the clear s ecurity acl command.
2-127 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s clear securit y acl Usage Guid el i nes Changes you make by enterin g this com mand are saved to NVRA M and hardware only af ter you en ter the commit command.
2-128 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands clear sec urity acl cap ture-po rts clear security acl captu re-ports T o r emove a po rt from the captur e port list, use the clear security acl ca pture -ports comman d.
2-129 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s clear security acl counters clear security acl coun ters T o clear the s tatistics for all A CEs on all A CLs, use the c lear securit y acl counte rs command .
2-130 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands clear sec urity acl cram clear security acl cra m T o di sab le compr ess ion a nd reo rderi ng o f ACL masks (CRA M) i n aut omati c m ode , use the clear securit y acl cram co mmand.
2-131 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s clear securit y acl log f low clear security acl log flo w T o clea r all f lo ws in the secu rity A CL log tabl e, use t h e cl ear securi ty acl log flo w co mmand.
2-132 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands clear sec urity acl m ap clear security acl map T o re move VAC L-to-VLA N mapping, use the clear securit y acl map comm and.
2-133 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s clear security acl map This e xample shows ho w to remo ve all VACL -to-VLAN m appings from a specific VL AN: Console> (enable) clear security acl map 5 Map deletion in progress.
2-134 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands clear sec urity acl statis ti cs clear security acl statistic s T o disable t h e collecti o n of sta tistics for all A CEs in a spec ifie d A CL, use the clea r secu rity ac l statistics command.
2-135 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s clear snmp ac cess clear snmp access T o remove the acce ss rights of an SNMP gro up, use the clear sn mp acce ss comma nd.
2-136 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands clear snm p access -list clear snmp acces s-list T o clear the IP ad dress of a host that is ass ociated with an access lis t number , use the clear s nm p access-list command.
2-137 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s clea r s nm p co mm unit y clear snmp communit y T o clear an SNMP comm unity table, use the clear sn mp community command .
2-138 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands clear snm p commu nity-ex t clear snmp communit y-ex t T o clea r an e xisting commun ity strin g, use the clear s nmp community -ext co mmand.
2-139 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s clea r s nm p gr oup clear snmp grou p T o remo ve th e SNMP user fr om an SNMP grou p, use the clear sn mp group co mmand .
2-140 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands clear snm p ifalias clear snmp i falias T o clea r an SN MP interf ace alias, u se the clear snmp ifalias comm and.
2-141 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s clear snmp inf orm clear snmp inform T o clear the SNMP in form requ est conf iguration , use the clear snmp inf orm comma nd.
2-142 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands clear snm p notify clear snmp notify T o clear the SNMP notify name in the snmpNotifyT able, use the clear snmp notify command.
2-143 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s clear snmp targe taddr clear snmp targetadd r T o clear the SNMP tar get address entry in the T arge tAddressT able, use the clea r snmp targetaddr comm and.
2-144 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands clear snm p target par ams clear snmp targ etparams T o clear the SNMP tar get parameters used in the snmpT argetP aramsT able, use the clear snmp target par am s com mand .
2-145 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s clear snmp trap clear snmp t rap T o cl ear an en tr y from th e SNMP trap receiver tabl e, use t he clea r sn mp tra p command.
2-146 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands clear snm p user clear snmp us er T o remo ve an SN MP user , use the clear snmp user comman d.
2-147 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s cle a r sn m p vi ew clear snmp vi ew T o remo ve the MI B vie w entry fr om the vacm V ie wT reeFam ilyT able, use the cl ear snmp view comm and.
2-148 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands clear spa ntree d ete cted-p rot ocols clear spantree d.
2-149 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s clea r s pa ntr e e m s t clear spantree mst T o clea.
2-150 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands clear spa ntree ms t Relat e d Commands set spantree ms.
2-151 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s clea r sp an tre e por tco s t clear spantree portc ost T o clear the po rt cost o f a port on the switc h, use the clear sp ant ree portc ost co mman d.
2-152 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands clear spa ntree p ort instance cost clear spantree porti nstanceco st T o restore the def ault path cost to an instance on a port, use the clear s pantr ee portinsta ncecost comm and.
2-153 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s clear span tree portinstan cecost Relat e d Commands .
2-154 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands clear spa ntree p ort instance pri clear spantree porti nstancepri T o restore the def ault path cost to an instance on a port, use the clear s pantr ee portinstanc epri comm and.
2-155 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s clear spantree po rtpri clear spantree portp ri T o clear the port pr iority of a port on the switch, use the clear spant r ee portpri comm and.
2-156 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands clear spa ntree p ortvlanc ost clear spantree portv lancost T o restore the def ault path cost to a VLAN on a port, use the clear span tree port vlanc ost command .
2-157 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s clear sp an tre e por tvla nco st Usage Guid el i nes This command is valid in PVST+ mode only . If you do not spe cify a VL AN, a ll V LAN s ar e cle are d.
2-158 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands clear spa ntree p ortvlanp ri clear spantree portv lanpri T o reset the spanning tree port VLAN prior ity , use the clear spant ree portvlanpr i co mmand .
2-159 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s clear spantree r oot clear spantree root T o rest ore.
2-160 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands clear spa ntree ro ot This e x ample sho ws how to clear the spa nning tree roo t on an instance : Console> (enable) clear spantree root mistp-instance 1 Instance 1 bridge priority set to 32768.
2-161 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s clear sp antree statistics clear spantree statistic s T o clear the s panning tree stat istics, use the clea r spant ree stati stics command .
2-162 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands clear spa ntree sta tistics This e x ample sho ws how t.
2-163 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s clear spantree up linkfast clear spantree uplink fast.
2-164 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands clear ss h mode clear ssh mode T o clear the Secu re Shell ( SSH) ve rsion and r eturn to compatibil ity mode, u se the clear ssh mode comm and.
2-165 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s clear syst em info-log command clear system info-log command T o r em ove a show comm an d from the s ystem i nform ation loggin g index, use the clear s yste m inf o-log command command .
2-166 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands clear sy stem pr ofile clear system profile T o clear the system prof ile configura tion, use the clear s yst em profile command.
2-167 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s clear ta cacs key clear tacacs key T o remov e the ke y setting used for T ACA CS+ authentica tion and encryption, use the clea r taca cs ke y comm and.
2-168 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands clear tac acs se rve r clear tacacs serv er T o remo ve a host fr om the lis t of T A CA CS+ serv ers, use the clear ta cacs s erver com mand .
2-169 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s clear ti mezone clear timezone T o return the time zo ne to its default, UTC, use the clear ti mezone command .
2-170 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands clear top clear top T o sto p the T opN process, use the clear top command. clear to p { a ll | r eport_nu m } Syntax D escr i pti on Defaults Thi s command has no de fa ult set tings.
2-171 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s clea r tr un k clear trunk T o restore a trunk port to its defa ult trunk type and mode or to clear specific VLANs from the allo wed VLAN list for a trunk port , use the clear trunk comman d.
2-172 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands clear vl an clear vlan T o delete an ex isting VLAN from a manage ment domain or to clear VLANs that are secured b y a Fire wall Ser vices Module, use the clea r vlan co mmand .
2-173 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s clear vlan Relat e d Commands set vlan show vlan.
2-174 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands clear vl an co unters clear vlan counte rs T o retu rn the so ftware- cache d counte rs to 0 for all VLANs, use the clear vl an co unte rs co mman d.
2-175 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s clear vla n mapping clear vlan mapping T o dele te existing IEE E 802.1 Q VLAN-to- ISL VLAN mapping s or reserved-t o-nonre served VL AN mappin g, use the clear vlan mapping command.
2-176 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands clear vm p s rcp clear vmps rcp T o delete the VMPS rcp user name from the VMPS serv er table, use the clear vmps r cp comm and.
2-177 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s clear vmps server clear vmps server T o de lete a VMP S server f rom the VMPS server table, use the c lear vmps ser ver com mand.
2-178 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands clear vm p s stat is ti cs clear vmps statistics T o delete exi sting VMPS statistics, use the clear vmps statisti cs command.
2-179 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s clear vtp pruneel igible clear vtp pruneeligibl e T o specify which VLANs in the VTP domain are ine ligible f or pruning, use th e clear vt p prunee ligible comm and.
Chapter 2 Catalyst 6500 Series Sw itch and ROM Monitor Comm ands clear vtp statistics 2-180 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 2 clear vtp statistics T o delete VT P statistics, use the clear v tp stat istics comman d.
2-181 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s comm it commit T o commit al l A CEs or a specif ic A CE in NVRAM that has not been written to hardw are, use the commit comm an d.
2-182 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands commit Relat e d Commands ro llback.
2-183 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s commit lda commit lda T o commit ASLB c onfi guration th at has not bee n written to hardw are to NVRAM, u se the commit lda comm and.
2-184 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands configu re configure T o download a c onfiguration file from an rcp se rver or the networ k and execute each c omman d in that fi le, use the conf igure comman d.
2-185 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s configu re Exam ples Th is example shows how to do wnload the syst em5 .cfg c onfiguratio n file from t he 192.
2-186 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands confreg confreg T o conf igure the conf iguration re gister utility , use the confr eg comm and. confreg [ num ] Syntax D escr i pti on Defaults Thi s command has no de fa ult set tings.
2-187 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s confr eg enter to boot: 0 = ROM Monitor 1 = the boot .
2-188 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands context context T o di splay the con text of a l oade d im age, use the context co mmand. cont ext Syntax D escr i pti on This c omm and ha s no a rgument s o r keywords.
2-189 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s cont ext a0 : 00000000 00000400 | s4 : 00000000 00000.
2-190 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands copy copy T o u ploa d or downlo ad a Fla sh ima ge or a sw itch co nfigura tion t o or f rom a Fla sh device, r cp server, TFTP se rver, or an S CP s erver, use the copy command.
2-191 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s copy Defaults If a so urc e or d esti nat ion device is not given, the on e spe cified by t he cd command is used.
2-192 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands copy If you ar e copying a softwa re image to mult iple intelligen t switching mo dules of the same type, use the flash keyword a s the co py destina tion.
2-193 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s copy This exam ple shows how to use the copy command to upload t he switch conf iguratio n to a f ile named lab2.
2-194 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands copy Console> (enable) copy flash config Flash device [bootflash]? Name of configuration file? test.cfg Configure using bootflash:test.
2-195 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s copy 4369664 bytes available on device bootflash, pro.
2-196 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands copy ##################################################.
2-197 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s copy Relat e d Commands clear ft p conf igure reset.
2-198 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands dele te delete T o delete a conf iguration f ile, use the delete comm and. delete [[ m/ ] device : ] file n a m e Syntax D escr i pti on Defaults Thi s command has no de fa ult set tings.
2-199 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s dev dev T o list the de vice IDs av ailable on a swit ch, use the de v comm and. dev Syntax Descript ion This c omm and ha s no a rgume nts o r keywords.
2-200 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands dir—ROM monit or dir—ROM monitor T o list the files of the name d device, use the dir comman d. dir de vice Syntax D escr i pti on Defaults Thi s command has no de fa ult set tings.
2-201 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s dir—switch dir—switch T o display a list of f iles on a Flash memory dev ice, use the dir command.
2-202 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands dir—swit c h Exam ples This example sho ws how to dis.
2-203 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s disa ble disable T o re turn t o n orma l mo de f rom p rivileged mo de , use the disable comman d. disable Syntax Descript ion This c omm and ha s no a rgume nts o r keywords.
Chapter 2 Catalyst 6500 Series Sw itch and ROM Monitor Comm ands discon nect 2-204 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 22 disconn ect T o close a sessio n by se ssion ID num ber, use the disconnect command . disconnect session_id Syntax Descript ion Defaults Thi s command has no de fa ult set tings.
2-205 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s download down load T o copy a software image from a specified host to the Flash me mory of a designate d module , use the download command.
2-206 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands downlo ad Befo re you can e xec ute the download vmps c.
2-207 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s download This sam ple sessio n shows how to connect t.
2-208 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands downlo ad This example shows ho w to upgrade the EPLD ima ge in force mod e on the modu le in slot 5: Console> (enable) download epld aq_cr128_art.
2-209 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s enable enable T o ac t iv ate pr ivileged mo de, u se the enable co mma nd. I n p rivileged mo de , ad ditio na l c omm ands ar e av ailable, a n d certai n comman ds display additional information.
Chapter 2 Catalyst 6500 Series Sw itch and ROM Monitor Comm ands format 2-210 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 22 format T o fo rmat boo tflas h or a Fl ash PC ca rd (a Flash d evice must be fo rmat ted be fore it ca n be u sed), u se the fo r m a t command.
2-211 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s for ma t Y ou ca n also spec ify device1 : monlib-f i.
2-212 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands frame frame T o displ ay an individual stac k fram e, use the fr ame command.
2-213 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s fsc k fsck T o check a Fl ash fi le syste m for damage an d to repair any p roblems , use the fsc k co mman d.
2-214 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands fsck Ente r th e dir command ag ain to see that the co .
2-215 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s history—RO M monitor history—ROM monitor T o displ ay the co mman d history (t he last 16 co mman ds executed in the ROM monitor e n vironment ), use the history co mmand .
2-216 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands histor y—sw itc h history—switch T o s how th e co nt en ts of t he co mma nd h isto ry buffer , use the history comma nd.
2-217 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s l2trace l2trace T o displa y the Layer 2 path taken by the pa ckets that sta rt at a specif ied sourc e address an d end at a specif ied d estination address, use the l2trace command .
2-218 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands l2tra ce The Lay er 2 trace feature is not sup ported when multiple de vices ar e attached to one port throug h hubs (for exa mple, multiple CDP neighbors detected on a port).
2-219 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s l2trace This examp le shows how to display a su mmary.
2-220 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands meminfo meminfo T o display informat ion about the main memory , p acket memory , and NVRAM, use the me min fo command.
2-221 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s ping ping T o s end ICM P e ch o-r eque st pa c kets to an othe r nod e on t he n etwor k, use the ping command.
2-222 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands ping The guide lines for th e ping -s command are as follows: • The maximum w aiting time before timing out is 2 seconds.
2-223 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s ping 64 bytes from elvis: icmp_seq=4. time=11 ms 64 bytes from elvis: icmp_seq=5. time=7 ms 64 bytes from elvis: icmp_seq=6.
Chapter 2 Catalyst 6500 Series Sw itch and ROM Monitor Comm ands pwd 2-224 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 22 pwd T o show the cu rrent set ting of the cd command , use the pwd comm and.
2-225 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s quit quit T o exit a CLI session, use the quit comm and. quit Syntax Descript ion This c omm and ha s no a rgume nts o r keywords.
2-226 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands reconfirm vmp s reconfirm vmps T o reconf irm the curr ent dynam ic port VLA N members hip assign ments with the VMPS s erver , use the reconf irm vmps comm and.
2-227 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s reloa d reload T o for ce a modu le to acce pt a download throug h SCP , use the reload comman d. Thi s comma nd resets the module and prompt s you to initia te a download when th e reset is com plete.
2-228 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands repeat repeat T o repeat a com mand, use the repe a t command . rep e a t [ num | string ] Syntax D escr i pti on Defaults If no argu ment is specifie d, th e last command is repeated.
2-229 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s repeat rommon 23 > repeat dir dir bootflash: File .
2-230 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands reset— ROM moni tor reset—ROM monitor T o perf orm a soft res et of t he swit ch, use the res et ROM monit or com mand.
2-231 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s reset—switch reset—switch T o restart the system or an ind ividual module, schedule a system reset, or cancel a sche duled rese t, use the res et command.
2-232 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands reset—s witch Y ou ca n use the rese t mi ndown comm and to r eset the swit ch as part of a minimal downt ime so ftw are upgrade in a system with a redundant supervi sor engine .
2-233 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s reset—switch This e xample sho ws ho w to schedu le.
2-234 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands reset—s witch.
Chapter 2 Catalyst 6500 Series Sw itch and ROM Monitor Comm ands restor e co un te rs 2-235 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 2F2 restore counters T o rest ore MA C and port coun ters, use the re store counte rs command .
2-236 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands restore coun ters This exam ple shows how to re store t.
2-237 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s rollback rollback T o clear chan ges made to the A CL edit b uf fer since its last sav e, use the rollback command .
2-238 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands sessio n session T o open a se ssion with a modu le (for e xamp le, the MSM, N AM, or A TM), use the session command.
2-239 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set set T o display all of the R OM monitor va riable names wit h their val ues, use the set comman d. set Syntax Descript ion This c omm and ha s no a rgume nts o r keywords.
2-240 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set acco unt ing comm ands set accountin g commands T o en able comm and e vent accou nting o n the switch , use the set accounting commands comman d.
2-241 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set acco unting c onnect set accountin g connect T o ena ble a cco unti ng of o ut bou nd co nne cti on events o n th e swit ch, use th e set accounting co nnect comm and.
2-242 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set acco unt ing exe c set accountin g exec T o enabl e account ing of norm al login sess ions on the sw itch, us e the se t accou nting ex ec command.
2-243 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set accou nting ex ec Relat e d Commands set accounti.
2-244 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set acco unting su ppress set accountin g suppress T o .
2-245 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set accounti ng system set accountin g system T o enable acc ounting o f system e vents on th e switch, use th e set acco unting sy stem co mmand .
2-246 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set acco untin g sy stem Relat e d Commands set account.
2-247 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set acc ounting update set accountin g update T o con figure the fr equen cy of account ing updat es, use the set accounting updat e command.
2-248 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set a cll o g rate lim it set acllog ratelimit T o lim it the nu mbe r of pa ckets se nt to the r oute p roc essor CPU for bri dged ACEs, use the set ac llog rate limit command .
2-249 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set acl mac-packet-classify set acl mac-packet-c lassify T o set MAC-based A CL looku ps for all packet type s on a VLAN, use the set ac l m a c-p ac ket-c la ssi fy comm and.
2-250 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set al ias set alias T o d efine ali ases (sho rtha nd version s) of co mm an ds, use the se t al ias command.
2-251 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set ar p set arp T o add IP ad dress- to-MA C address mapping en tries to the ARP tabl e and to set th e ARP aging t ime for the table , use the set arp command .
2-252 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set ar p This e xample sho ws how to conf igure a permanent ARP entr y , which will remain in the ARP cache after a system reset: Console> (enable) set arp permanent 198.
2-253 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set authentication enable set authentica tion enabl e.
2-254 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set authent ication enable Exam ples This examp le sho .
2-255 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set auth enticati on login set authentica tion login T o enable T A CA CS+, RADIUS, or K erberos as the authenti cation metho d for login, u se the set authen tic atio n l og in command.
2-256 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set a uth e n t ic a t ion lo g in Usage Guid el i nes This comm and all ows you to choose th e authen tica tion meth od for the we b interfac e.
2-257 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set au tho riz at io n comm an d s set authorizatio n commands T o enable auth orization of comman d e vents on the switc h, use the set author ization comm ands comm and.
2-258 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set authori zation com m a nds Exam ples This exampl e .
2-259 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set authori zation ena ble set authorizatio n enable T o enable auth orization of pri vileged mode sessions on the switch, use the set author ization e nable comm and.
2-260 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set a uth o r i zat ion e n a b le This exampl e shows how to disab le enab le mod e author izatio n: Console> (enable) set authorization enable disable Successfully disabled enable authorization.
2-261 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set authorization exec set authorizatio n exec T o enable authoriza tion of e xec (nor mal mode) session ev ents on the swit ch, use the set author izati on exec com mand .
2-262 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set authori zation exec This exampl e shows ho w to disabl e ex ec mode authoriza tion: Console> (enable) set authorization exec disable Successfully disabled exec authorization.
2-263 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set autoshut set autoshut T o enab le or dis able autom atic module s hutdo wn, use the set module aut oshut comm and.
2-264 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set a uto sh ut When the fre quency thre shold is reac hed and occ urs withi n the defined period , the Eth ernet modul e automatically shuts down .
2-265 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set ba nne r lc d set banner lc d T o con figure t he Ca talyst 650 0 se rie s Swi tc h Fabric Mod ul e L CD use r bann er, use the set banner lcd comm and.
2-266 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set bann er m ot d set banner motd T o prog ram a n MO TD banner to appear before session login , use the set banner motd comm an d.
2-267 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set ba nner tel net set banner te lnet T o di splay or s uppr ess t he “ Cisc o System s C onsole” T elnet banne r me ssage , use t he s et banner telnet comm and.
2-268 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set boot aut o-conf ig set boot auto-con fig T o specif y one or mor e configur ation files to use to configure th e switch at boo tup, use th e set boot auto-c onfig comm and.
2-269 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set boo t config -regist er set boot config -register T o con fi gu re t he b oot co nfi gu rat ion regi ster va lue , use th e s et bo ot co n fig-regis te r co mman d.
2-270 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set boot conf ig-regis t er The baud rate speci fied in the conf iguration re gister is use d by the R OM monitor o nly and is dif ferent from the baud rate spe cif ied by the set system baud command.
2-271 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set boo t config -regist er Relat e d Commands copy s.
2-272 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set boot conf ig-regis t er auto-c onf ig set boot config -register au to-config T o configure auto -config file dispensa tion, use the set boot conf ig-r egister auto -conf ig co mmand .
2-273 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set boot config-register auto-config If you use the set boot auto-con f ig bootflash: switch.cf g with the overwri te option, y ou must u se the copy conf ig bootflash:switch.
2-274 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set boot conf ig-regis t er auto-c onf ig This e xample.
2-275 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set boot device set boot device T o set the Network Analysis Module (NAM) or Int rusion Detection System (I DS) boot environment, use the set boot device command .
2-276 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set boot dev ice This example shows ho w to specify mul.
2-277 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set boot sync no w set boot sync now T o immed iately initiate synchr onizati on of the sy stem imag e betwe en the acti ve and redund ant supervi sor engine, use the set bo ot sync now command.
2-278 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set boot sy nc time r set boot sync timer T o speci fy an amoun t of time fo r the image s ynchroniz ation timer , use the set boot sync timer co mmand .
2-279 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set boot syst em flash set boot system fla sh T o set the BOOT envi ronment v ariab le tha t specif ies a li st of ima ges th e switc h load s at sta rtup, u se th e set boot system flas h com mand.
2-280 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set ca m set cam T o add entries int o the CAM table, set the agin g time for the CAM table, and c on fi gu re t ra f fi c f ilt er i n g from and to a specifi c host, us e t he set cam co mmand .
2-281 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set ca m Usage Guid el i nes If the gi ven MA C addre.
2-282 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set cam monitor set cam monitor T o moni tor the M A C .
2-283 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set ca m monit or Command Mode s Pri vile ged.
2-284 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set cam not if i cation set cam notification T o enable.
2-285 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set cam notification Command Mode s Pri vile ged.
2-286 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set cam not if i cation Relat e d Commands clear ca m c.
2-287 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set cd p set cdp T o ena ble , disa ble, o r co nfigure Ci sco D isc overy Protoc ol (CD P) fea ture s g lob ally on al l po rts o r on specif ied ports, use the set cdp comm and.
2-288 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set cd p Usage Guid el i nes The set cdp v ersion command allo ws you to global ly set the hi ghes t version n umber of CDP p ackets t o send.
2-289 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set channelprotocol set channelp rotocol T o set th e protoc ol that man ages chan nelin g on a module , use the se t channe lprotocol comman d.
2-290 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set chan nel protoc ol Relat e d Commands clear la cp-c.
2-291 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set c hannel vlancost set channel vla ncost T o s et th e chan nel V LAN co st, use th e set channel vlancost comm and.
2-292 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set chan nel vlanc ost After you enter this comm and, you must reenter the set s pantr ee portvlanco st comm and so th at th e desired VLAN or VL ANs are a ssociated with all th e channe l ports.
2-293 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set config acl nvram set config acl n vram T o copy the curren t commi tted A CL co nfiguration fr om DRA M back int o NVRA M, us e the set config acl n vram com ma nd .
2-294 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set config checkpo int set config che ckpoint T o crea te a che ckpoint co nfigurati on file, use the set config checkpoint comma nd.
2-295 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set con fig checkpo int This exam ple sh ows how to s.
2-296 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set config mode set config mod e T o chang e the config.
2-297 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set confi g m ode Usage Guid el i nes Y ou can specify th e time int erv al b etween occu rrence s of sa ving the te x t conf igur ation in NVRAM e v en if the syste m is in binar y mod e.
2-298 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set config mode Relat e d Commands show conf ig mode wr.
2-299 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set config rollback set config rol lback T o roll the curren t conf igur ation f ile back to a checkpoi nt conf igu ratio n file , use the set c onf ig rollbac k comm and.
2-300 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set cops set cops T o conf igure COPS functi onality , use the set cops comman d.
2-301 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set cops Exam ples Th is example sh ows how to configure a s erver as a pri mar y server: Console> (enable) set cops server 171.
2-302 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set cryp to ke y r sa set crypto key rsa T o gen erate a nd c onfigure an RSA key pa ir, use the set c rypto key rsa command.
Chapter 2 Catalyst 6500 Series Sw itch and ROM Monitor Comm ands se t default portstatu s 2-303 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 222 set default portstatus T o set t he def ault port sta tus, use the set default portstatus com mand.
2-304 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set dhcp -snoop ing set dhcp-sno oping T o en able DHC P snoopi ng infor mat ion- opti on host trac king or the M AC address matc hing feature , use the set dhc p-snooping command.
2-305 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set dhcp -snooping This comm and shows ho w to disable DH CP snooping MAC address matchin g: Console> (enable) set dhcp-snooping match-mac disable DHCP Snooping MAC address matching disabled.
2-306 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set dot1q- all-tagg ed set dot1q-all-tagged T o chang e all existing and new dot1q trunk s to the dot1q- only mode , use the set dot1q-all-tagged comm and.
2-307 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set dot1x set dot1x T o configure 802.
2-308 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set d ot1x Defaults The def ault settings are as follo ws: • system-auth-control is enabled. • quiet-period is 60 se cond s.
2-309 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set dot1x T o acti vate th e shut do wn -time out tim er on a po rt, en ter th e set port dot1 x mod/port shutdown-timeout comm and.
2-310 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set d ot1x Th is exam p le s h ows y ou h ow t o s pe c.
2-311 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set dot1x Relat e d Commands clear dot 1x conf ig cle.
2-312 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set e nab lep a s s set enablepa ss T o change the passw ord for the pri vile ged lev el of the CLI, use the set enablepass comm an d.
2-313 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set er rdisabl e-time out set errdisable-timeout T o conf igure a time out to auto matically r eenable ports that are in the err disable state, use the set errdisable -timeout comm and.
2-314 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set errdisa ble-time out • gl2pt-stp-threshold- excee.
2-315 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set er rordetect ion set errordetection T o enabl e or disab le various erro r detect ions, use the set err ordetection co mmand .
2-316 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set errord et ection Defaults The follo wing are the default settings for set erro rdetectio n : • Inband erro r detection is enabled .
2-317 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set er rordetect ion The rapi d boot feat ure is av a.
2-318 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set errord et ection Exam ples Th is exampl e sh ows how to ena ble m emor y er ror det ect ion: Console> (enable) set errordetection memory enable Memory error detection enabled.
2-319 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set fan-tray-version set fan-tray-version T o set t he ve rsion for the fan tr ay in th e chassis, u se the set fan-tray-versi on command.
2-320 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set feature agg-link- partne r set feature ag g-link-partner T o enable or dis able the aggress iv e lin k partn er featu re, use the set fe ature agg-link-partner command.
2-321 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set feature mdg set feature mdg T o enable or disable the multiple defau lt gate way feature, use the set feature mdg comman d.
2-322 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set fi rewall set firewall T o conf igure the paramete rs for a Firew all Services Modul e (FWSM), use the set firewall command.
2-323 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set ftp set ftp T o con figure Fi le Transfer Pr otoc ol ( FTP) para m eters, us e the set ftp comm and.
2-324 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set ft p This example shows how to disable FTP passive mode: Console> (enable) set ftp mode passive disable FTP Passive mode disabled.
2-325 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set garp timer set garp timer T o adjust the v alues of the join, lea ve , and lea veall timers, use the set garp timer comma nd.
2-326 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set gm rp set gmrp T o enable or d isable GARP Multica s t Regi stration Protocol ( GMRP) on the switch in all VLANs on all ports, use the set gm rp co mman d.
2-327 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set gmrp fwdall set gmrp fwdall T o enab le or di sable the Forward All feature on a speci fied port or mo dule an d port lis t, use t he set gmrp fwdall comman d.
2-328 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set gmrp re gis tr ation set gmrp registration T o spec ify the GMRP regi strat ion type , use the set gmrp regis tration comm and.
2-329 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set gmrp timer set gmrp timer T o adjust the v alues of the join, lea ve , and lea veall timers, use the set gmrp timer comman d.
2-330 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set gmrp timer This e xam pl e sho ws how to set t h e .
2-331 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set gvrp set gvrp T o enab le or disa ble GARP V LAN Registrati on Protocol (GVRP) globally in the switch or on a pe r-port basis, use the set g vrp command.
2-332 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set gvrp appl icant set gvrp appli cant T o s pecify whether or not a VLAN is de clared out of blocking ports, use the set gv rp appl ican t comm and.
2-333 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set gvrp dyn a mic-vlan-creat ion set gvrp dynamic-vlan-creatio n T o enab le or d isable dynamic VLAN cr eation, use the set gvrp dyna mic-vlan-c reation command.
2-334 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set gvrp r egi stratio n set gvrp reg istra tion T o s et the ad mini stra tive contro l of a n outbo und po rt a nd appl y t o all VL ANs on the tr unk , use t he set gvr p re gistra tion command.
2-335 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set gvr p regist ration This e xample shows ho w to s.
2-336 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set gvr p timer set gvrp timer To adju st the v alues of the j o in, le av e, and lea veal l timers, use th e set gvrp timer command.
2-337 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set gvrp timer This e xam pl e sho ws how to set t h .
2-338 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set ig mp set igmp T o ena ble o r di sab le Inte rn et Group M anag eme nt Pr otoc ol ( IG MP) sn oop ing on the swi tch , us e the set ig mp command.
2-339 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set igmp fastblock set igmp fastblock T o enable or d isable the IGMP v ersion 3 fast-bloc k mechanism on the switch, use th e set i gmp fastb lock comm and.
2-340 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set ig mp fastle ave set igmp fastleave T o ena ble o r disab le Inte rn et Group M a nagem e nt Pr otoc ol ( IGM P) fast leave proces sin g, use the set i gmp fa stleave comman d.
2-341 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set igmp flooding set igmp flooding T o acti vate or to pre vent flooding of mul ticast traf fic after the last host lea ves a multicast group, enter the set igmp f loodin g co mman d.
2-342 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set igmp leave-que ry-type set igmp leave-que ry-type T o s et the t ype o f que ry to be se nt wh en a po rt r ece ives a leave messag e, u se the se t igmp lea ve-query-type comman d.
2-343 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set igmp mode set igmp mode T o s et the IG MP snoopi n g m ode, use th e set igmp mode command .
2-344 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set ig mp querier set igmp querier T o conf igure the IGMP q uerier for a specif ic VLAN, use the set igmp querier command.
2-345 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set igmp querier This exampl e shows ho w to set the .
2-346 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set igmp v3-pro ces sing set igmp v3-processing T o exp licitly e nabl e or disa ble I GMP version 3 snoo ping, u se the set igmp v3-processing comm and.
2-347 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set image-verification set image-verification T o ensure th e integ rity of a do wnloaded image, use the set image-v erif ication command .
2-348 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set inline pow er set inlinepower T o set in line power parame ters, use the set inlinepower comman d.
2-349 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set inlinepower This e xample shows ho w to set the t.
2-350 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set in terfac e set interface T o conf igure the in- band and Serial L ine Inter net Proto col (SLIP) interf aces on th e switch, use the set interface command.
2-351 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set interface Usage Guid el i nes The set interfac e sc0 dchp com mand is valid on ly when the addr ess is lear ned from th e DHCP server and available in privile ged mode only.
2-352 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set in terfac e This exa mple sho ws ho w to r elease a DHCP- learned I P addr ess back to the DHC P IP a ddress p ool: Console> (enable) set interface sc0 dhcp release Releasing IP address.
2-353 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set ip alias set ip alias T o add aliases o f IP addresses, use the s et ip alias comman d. set ip alias name i p_addr Syntax Descript ion Defaults The de fault configurat ion is one IP al ias (0.
2-354 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set ip dns set ip dns T o enab le or dis able DNS, use the set ip dns comman d. set ip dns { ena bl e | di sa ble } Syntax D escr i pti on Defaults The def ault is DNS is d isabled.
2-355 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set ip dns domain set ip dns domain T o set t he defau lt DNS doma in name, us e the set ip dns domain comman d.
2-356 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set ip dns ser ver set ip dns server T o set the IP addres s of a Doma in N ame Sys tem (D NS) s erver , use t he se t ip dns s erver comman d.
2-357 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set ip fragmentation set ip fragmentation T o ena ble or d isable t he frag menta tion of IP packet s bridge d betwee n FDDI and Eth ernet networks, use the set ip fragment ation command.
2-358 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set i p ht tp por t set ip http port T o conf igure the TCP port numbe r for the Hype rT ext T ransfe r Protoco l (HTTP) se rve r , use the set ip http port comma nd.
2-359 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set ip http server set ip http server T o e na bl e o r di sab l e th e HTT P se rver, use the se t ip http server comma nd.
2-360 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set i p p e rm it set ip permit T o enable o r disable the IP p ermit li st and to spe cify IP a ddresses to b e added to the IP permit list , use the set ip permit com mand.
2-361 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set ip permit Exam ples This example sho ws how to add an IP address to the IP permit list: Console> (enable) set ip permit 192.
2-362 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set ip redire ct set ip redirect T o enable o r disab le ICM P re direct me ssage s on the Catalyst 6500 se ries switches, u se the set ip redirect co mman d.
2-363 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set ip route set ip route T o add IP addr esses or a liases to the IP rout ing table, use the set ip route comma nd.
2-364 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set ip rout e Exam ples Th ese examples show ho w to ad.
2-365 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set ip unr eachabl e set ip unreachabl e T o enable or disable ICMP unreac hable messages o n the Catalys t 6500 series switc h, use the set ip unrea chable command.
2-366 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set kerbe ros clients m and atory set kerberos clients .
2-367 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set kerbero s credentials f orward set kerberos crede.
2-368 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set kerb eros loca l-r ealm set kerberos local-realm T o conf igure a switch to authen ticate users def ined in the Kerb eros database, use the set kerberos local-r ealm co mma nd.
2-369 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set k erb eros r eal m set kerberos realm T o map th e name of a Kerbe ros realm to a DNS domai n name or a host name, use the set ke rberos realm comm and.
2-370 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set kerb eros s erver set kerberos server T o s pecify whi ch Key Distribution Ce nte r (K DC) to us e on t he sw itch , use the se t kerberos serv er comm and.
2-371 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set kerbero s srvtab entry set kerberos srvtab ent ry T o enter the SR VT AB f ile directly into the switch fr om the command li n e, use the set kerberos srvtab entry command.
2-372 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set kerbe ros srvt ab entry Exam ples This example sho ws ho w to enter a SR VT AB f ile directly into the switch : Console> (enable) set kerberos srvtab entry host/niners.
2-373 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set kerber os srvtab rem ote set kerberos srvtab re m.
2-374 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set key conf ig-key set key config-key T o d efine a private 3DES key , use t he set key conf ig-ke y comman d.
2-375 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set l2pr otocol -tunne l cos set l2protoco l-tunnel c os T o apply a CoS va lue to all ingress tunneling ports, use the set l2protocol-tunnel cos comm and.
2-376 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set l2prot oco l-tun nel trunk set l2protoco l-tunnel trun k T o set La yer 2 proto col tunnel ing on tru nks, use the set l2pr ot ocol-tunnel trunk command.
2-377 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set lac p-channel system-p riority set lacp-channe l system-priority T o set t he priority of the system , use th e set lacp-channel system-priority command.
2-378 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set lcperror actio n set lcperrorac tion T o con figure.
2-379 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set lda set lda T o conf igure the ASLB informatio n on the Catalyst 6500 series switc h, use the set lda comman d.
2-380 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set ld a Usage Guid el i nes This c omm and is suppor ted on ly o n sw itc he s configu red w ith th e Supe r visor En gine 1 wi th L aye r 3 Switching Engine WS-F6K-PFC (Pol icy Feature Card) .
2-381 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set lda This e x ample sho ws how to specify the ro uter VLAN: Console> (enable) set lda router 110 4/26 Successfully set router vlan and ld port.
2-382 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set l e n g th set length T o conf igure the numb er of line s in t he terminal display scr een, us e the se t length co mman d.
2-383 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set localuser set localuser T o conf igure the switch to us e loc al u ser au th en tic atio n to auth en tic ate ac ces s o n the s witch, use th e set localuser command.
2-384 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set l o c a lu ser Exam ples This examp le sho ws ho w .
2-385 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set logging buffer set logging bu ffer T o lim it the nu mber of sy stem l oggi ng me ssa ges buffered, use t he set logging buffer command.
2-386 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set loggin g callhom e set logging ca llhome T o enable or disable the CallHom e featur e, use the set logging callhome comm and.
2-387 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set logging callhome show logging callhome from show .
2-388 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set logg in g callhome d esti nat ion set logging ca ll.
2-389 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set logging callhome destination Console> (enable) set logging callhome destination adminjane@cisco.com Included adminjane@cisco.
2-390 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set loggin g callhom e f rom set logging ca llhome from T o set t he Fro m e-mai l addres s used by the CallHo me feat ure, u se the set logging callhome fr om comm and.
2-391 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set logging cal lhome r eply-to set logging ca llhome reply-t o T o set the Reply-to e-mail ad dress, use the set logging c allhome r eply-to co mmand .
2-392 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set loggin g callhom e s everity set logging ca llhome severity T o specify the CallHo me sev erity lev e l of system messages to captur e, use the set logging callhome severity command .
2-393 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set logging callhome severity Exam ples This example .
2-394 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set loggin g callhome s mtp-s erv er set logging ca llh.
2-395 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set logging console set logging co nsole T o enable and disable the sendi ng of sy stem l ogging messages to the console , use t he set logging co nsole comm and.
2-396 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set logg in g history set logging hist ory T o s et the numbe r an d s ev erity level of sysl og me ssa ges sent t o the sysl og history ta ble, u se the se t log gin g hist ory command .
2-397 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set l ogging level set logging leve l T o set the faci lity and se verity lev e l used when logging system messages, use the set logging lev el comm and.
2-398 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set l o g g in g leve l Defaults The defau lt is faci lity is set to all , and leve l is se t to 0 . Comma nd T ypes Swit ch co mman d.
2-399 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set l ogging level Exam ples This example shows h ow .
2-400 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set logg ing se rve r set logging server T o ena ble an.
2-401 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set logging server Usage Guid el i nes Y ou c an als o set the loggin g level by using the set logg ing level command.
2-402 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set l o g g in g sess io n set logging sessi on T o enable o r disab le the sending of sy stem log ging me ssages to the c urrent log in session , use the set logging session co mmand .
2-403 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set logging telnet set logging teln et T o enab le or dis able loggi ng on T elnet session s, use the set loggi ng telnet command .
2-404 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set l o g g in g tim esta mp set logging timestamp T o enab le or disabl e the time -stamp displ ay on system logging m essages, us e the set logg ing times tamp comm and.
Chapter 2 Catalyst 6500 Series Sw itch and ROM Monitor Comm ands set logout 2-405 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 22 set logout T o set the number of minutes until the system disc o nnects an idle session automatica lly , use the se t logout command.
2-406 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set macro ciscosmar tports set macro ci scosmartport s T o set the global Cisco SmartPorts tem plate, use the set macro ciscos martports command.
2-407 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set mls agingti m e set mls agingtime T o specify the MLS agin g time of shortcuts to an MLS entry in the Catalyst 6500 series switches, use the set mls agingtime comm and.
2-408 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set m l s ag in gt ime The agingtime v alue can be conf igured as mul tiples of 8 in the r ange o f 8 to 2 024 seconds.
2-409 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set mls bridged-flow-statistics set mls bridged-f low-statistics T o enable or disable sta tistics for bridged flo ws for specifi ed VLANs, u se the set mls bridged- flow-s tat istics command.
2-410 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set mls cef l oad -balan ce set mls cef load-bal ance T o in cl ude or exclu de L ayer 4 por ts in a l oa d-b ala nci ng hash, use th e se t m ls cef load-balanc e comm an d.
2-411 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set mls cef max imum-rou tes set mls cef max imum-r outes To set the maximu m num ber of routes that can be programmed in t he FIB TCAM for a protocol, us e the set mls cef maximum- rou tes command.
2-412 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set mls cef maximum-routes • When the maximum ro utes is exceede d or the allocated TCAM space f or a protocol is fu ll, a system message (FIB_ALLOC _TCAM_FULL) displays.
2-413 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set mls cef per-prefix-statistics set mls cef per-prefix-statistics T o set MLS CEF per -prefix st atistics mo de, use the set m ls cef per-pr efix statistics command .
2-414 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set mls excl ude prot oco l set mls exclude protoco l T.
2-415 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set mls flow set mls flow T o specif y the minim um flo w mask used for MLS, use the set mls flow comman d.
2-416 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set m ls flow Exam ples Th ese examples show how to specify that only expired flows to subnet 171. 69.194.
2-417 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set m ls nd e set mls nde T o conf igure the NetFlo w.
2-418 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set m ls nde Defaults The def aults are N etflo w Data Ex port v e rsion 7, a nd all expired flo ws are e x ported u ntil the f ilter is specif ied explicitly .
2-419 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set m ls nd e In softw are releas e 8.3(1) and la ter releases, the dual destination f eature allo ws NetFlo w expor t data to be sent t o two dest inatio ns simult aneousl y .
2-420 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set m ls nde This e xample shows h ow to specify that only flo ws from a specific port are exp orted: Console> (enable) set mls nde flow include dst_port 23 NDE source port filter set to 23.
2-421 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set m ls nd e Relat e d Commands clear mls nde flo w .
2-422 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set m l s ne tf lo w -ent ry- c r e at e set mls netflo.
2-423 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set mls netflow-per- interface set mls netflow-per-interface T o enable or disable the creation of NetF low entries on a per- VLAN basis, use the se t mls netflow-per -interface comm and.
2-424 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set ml s rate set mls rate T o set the rate at which inde x-directed packe ts are sent to the MSFC, use the set mls rate comm and.
2-425 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set mls statistics protocol set mls statistics proto col T o add protocols to the protocols stat istics list, use the set mls stat isti cs protocol command.
2-426 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set ml s verif y set mls verify T o enab le or disab le ch ecksu m or packet ch eckin g based on packe t lengt h, use the set mls verify comm and.
2-427 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set mls verify Exam ples This examp le sho ws ho w to.
2-428 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set modul e set module T o enab le or d isable a module, u se the set module comman d. set m o du le en a ble | disable mod Syntax D escr i pti on Defaults The def ault is a ll modules ar e enabled .
2-429 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set module This example shows ho w to disable mod ule 2 whe n connecte d through a T elne t session: Console> (enable) set module disable 2 This command may disconnect your telnet session.
2-430 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set modul e au toshu t set module autoshut T o enab le or dis able autom atic module s hutdo wn, use the set module aut oshut comm and.
2-431 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set module autoshut Relat e d Commands clear aut oshu.
2-432 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set modul e na me set module name T o set th e name for a module, use the set module name command.
2-433 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set mod ule p ower set module power T o turn the po wer on or of f to a module, use the set module power command.
2-434 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set modul e po wer Relat e d Commands set poll show env.
2-435 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set module shutdown set module shutdown T o shut down the N AM and Intrusion Dete ction Syste m Module (I DSM), use the set module shutdown comm and.
2-436 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set msfcaut ostate set msfcautostate T o enable o r dis.
2-437 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set msfcautostate Cautio n Y ou should not d isable the MSFC auto state feat ure becau se the Laye r 3 interf ace status might not accura te ly re fle c t th e La yer 2 i nte rface sta tus.
2-438 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set msmautos tate set msmautost ate T o en able or disa ble th e line protocol st ate de termina tion of t he MSMs due to port state ch ange s, use the set msmautostate command .
2-439 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set multicast ratelimit set multicast ratelimit T o conf igure multicast ra te limiting, use the set multicast rat elimit comm and.
2-440 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set m u ltic ast rou te r set multicast router T o conf igure a port man ually as a multi cast router port, us e the set multicast router command.
2-441 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set n tp broa dcastclient set ntp broadcastc lient T o ena ble o r disab le NT P in br oadc ast- cli ent mode , use t h e set ntp broadcastclient comman d.
2-442 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set ntp broad castd el ay set ntp broadcastd elay T o conf igure a tim e-adjust ment f actor so the Catalyst 6500 s eries switch can recei ve br oadcast packets, use the set ntp broadcastdelay comm and.
2-443 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set n tp client set ntp client T o enable or disabl e a Catalyst 6500 ser ies switch as an NTP client, use the set ntp client command.
2-444 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set nt p server set ntp server T o s peci fy t he N T P server addr ess and co nfigure an N TP se rver au th en tica tio n key , us e the se t ntp server command.
2-445 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set ntp sum mertime set ntp summertime T o set th e clock ahead on e hour durin g dayli ght saving time, u se the set ntp summertime command.
2-446 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set nt p summertim e This exam ple sh ows how to preven.
2-447 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set ntp time zone set ntp timezone T o conf igure the time o ff set from G re en wi c h Me an Ti me , use the set ntp timezone command.
2-448 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set pa sswor d set password T o chan ge the lo gin p assw ord on the CLI, us e the set password comman d. set password Syntax D escr i pti on This c omm and ha s no a rgument s o r keywords.
2-449 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set pbf set pbf T o enable po licy -base d forw arding (PBF) and to set a MA C address fo r the PFC2, use th e set pbf comm and.
2-450 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set pb f Relat e d Commands clear pbf show pbf.
2-451 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set pbf ar p-inspection set pbf arp-inspection T o add an ARP-inspec tio n A CE to the A C L for a c lien t list o r a gat e way , use th e se t pbf arp-inspection comm and.
2-452 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set p bf c li ent set pbf client T o add ne w hosts to a PBF client list, use the set pbf client command.
2-453 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set p bf client Exam ples This example sho ws how to add a ne w host to a client list: Console> (enable) set pbf client cl1 21.
2-454 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set p bf g w set pbf gw T o add a PB F gateway to ha nd le co nnect ion s b etw een VLA Ns , use th e set pbf gw co mman d.
2-455 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set pbf gw Exam ples Th is exampl e sh ows how to ad d a PB F ga teway to hand le co nnecti on s b etwe en V LAN s: Console> (enable) set pbf gw gw1 21.
2-456 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set p bf- m ap set pbf-map T o create security A CLs and to set adjacenc y information or to map a list of hosts to a gatew ay , use the set pbf -ma p command.
2-457 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set pbf-map commit se curity acl ip PBF_MAP _A CL_12 .
2-458 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set p bf- m ap Relat e d Commands clear pbf cli ent cle.
2-459 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set pbf vlan set pbf vlan T o cre ate poli cy-based for ward (PBF ) Layer 2 CAM ent ries on a VLAN, use the set pb f vlan comm and.
2-460 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set p oll set poll T o enab le or d isable system pollin g, use the set poll command. set poll { enable | disable } Syntax D escr i pti on Defaults System pollin g is enab led.
2-461 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set po rt arp- inspect ion set port arp-inspection T .
2-462 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set port arp-i nspec tion Exam ples Th is example shows.
2-463 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set port auto-mdix set port auto-mdix T o enab le or disable the automatic Media-Depend ent In terfa ce Cros sov er (MDIX) f unctio n, use the set port auto -mdix fe atur e.
2-464 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set port auto -mdi x Exam ples Th is example shows ho w.
Chapter 2 Catalyst 6500 Series Sw itch and ROM Monitor Comm ands set port auxiliaryvla n 2-465 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 2 set port auxiliaryv lan T o conf ig ure the auxiliary VLA N ports, use the set port auxiliaryvl an command.
2-466 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set port auxi liaryv lan The pr esence of an IP phone is d etermin ed thr ough CDP packe t exchange be twee n the swi tch and the phone.
2-467 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set po rt br oa dca s t set port broadca st T o set broadcast, multica st, or unicast suppressi on for one or more ports, use the set port broadcast command.
2-468 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set port b roa dcast This e xample sho ws how to limit .
2-469 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set port c hannel set port channel T o con figure E the rCh an nel on E th erne t m odule p orts, u se the set port channel comm and.
2-470 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set port chan nel Defaults The def ault is EtherChann el is set to auto and silent on all module ports. The de faults for frame distribution ar e ip and both .
2-471 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set port c hannel Exam ples Th is ex ampl e sh ows how to s et th e ch an ne l mo de to desirable : Console> (enable) set port channel 2/2-8 mode desirable Ports 2/2-8 channel mode set to desirable.
2-472 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set port cops set port cops T o create port role s, use the set port cops command. set port cops mod / port rol e s ro l e 1 [ ro l e 2 ].
2-473 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set po rt de bo unc e set port debounce T o enabl e or disab le the de bounce t imer or co nfigure the time r setting on a per-port basis , use the set port debounce command.
2-474 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set port debo unce Usage Guid el i nes The debounce timer is the time th e firmw are waits before n otifying the supervisor engine o f a link chan ge a t t he physi cal la ye r .
2-475 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set port dhcp -snoopi ng set port dhcp-sno oping T o enable DHCP t rust and IP Sour ce Guard on a per -port basi s, use the set port dhc p-snooping comm and.
2-476 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set port dhcp -snoop ing Relat e d Commands show port d.
2-477 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set p ort disa ble set port disable T o disa ble a port or a ra nge of port s, use the set port disable comm and.
2-478 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set port dot 1q-all-tagg ed set port dot1q-all-tagged T o enable the 802.1 Q tagging feature o n specif ic ports, use the set port dot1q-all-tagge d comma nd.
2-479 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set port dot1q-all-tagged Relat e d Commands set dot1.
2-480 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set port dot 1q-ethert yp e set port dot1q-eth ertype T o set the Et h erT ype fi eld in the IEEE 802.1Q tag to a cu stom v alue, use the set port dot1q- ethertype comm and.
2-481 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set po rt dot1q- ethert ype Note Y ou can use a custom 802.1Q EtherT ype field on t runk po rts, 802.1Q access ports, and 8 02.
2-482 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set port dot 1qtunnel set port dot1qtunne l T o co nfigure th e dot1q t un nel mo de f or th e po rt, use th e set po rt dot1qtunnel command.
2-483 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set po rt dot1 qtu nn el This examp le shows the outp.
2-484 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set port dot1 x set port dot1x T o con figure 8 02.
2-485 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set po rt dot1 x Defaults The def ault settings are as follo ws: • The mu lti ple h ost f eat ur e is disa ble d.
2-486 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set port dot1 x If you disab le the mu ltiple host featur e, once a 802 .
2-487 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set po rt dot1 x • The authenti cation fail ure VLAN is supported only in the single -authenticat io n mode (the default port m ode).
2-488 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set port dot1 x This exam ple sh ows how to act iv ate .
2-489 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set port duplex set port duplex T o configu re the dup lex type of a n Ethe rn et p ort o r a rang e o f p ort s, use the set port duplex comm and .
2-490 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set p ort enab le set port enable T o enable a po rt or a ra nge of por ts, us e the set port enable command .
2-491 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set por t errdi sable-t imeout set port errdisable-timeout T o prevent an er rdisabl ed port fr om bei ng enab led, use t he set port e rrdisable -timeout command.
2-492 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set port error detect io n set port errordetection T o enab le or dis able link er ror monito ring on an Ethe rChannel port, use the set port err ordetec tion comm and.
2-493 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set port flowcontrol set port flowcontrol T o co nf igure a port to se nd or rec eiv e pause frames, us e the s et por t flowcon tr ol comm an d.
2-494 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set port flowc ontrol Ta b l e 2 - 1 7 descri bes guid eli nes for differe nt c onfigura tions o f the send a nd re ce i ve ke ywor ds.
2-495 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set p ort gm rp set port gmrp T o enable or disable GMRP on the specified ports in all VLANs, use the set port gmrp command .
2-496 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set port gvrp set port gvrp T o enable o r disable GVRP on th e specified ports in all VLA Ns, use the set por t gvrp comman d.
2-497 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set port g vrp This examp le shows what happens if yo.
2-498 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set po rt host set port host T o optimize the port co nf iguration for a host connec tion, use the set port host co mmand.
2-499 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set p ort inlinepower set port inlinepower T o s et the i nli ne power mo de of a po rt or group of p orts, u se t he set port inline power command .
2-500 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set por t inli n epower This exam ple sh ows the o utput i f th e inl ine power fea tu re is not s uppo rte d: Console> (enable) set port inlinepower 2/3-9 auto Feature not supported on module 2.
2-501 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set port jumbo set port jumbo T o enab le or dis able the jumb o frame featur e on a per- port basis , use th e set por t jumbo co mman d.
2-502 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set port l2 prot ocol-tun nel set port l2protoco l-tunnel T o set La yer 2 proto col tunnel ing para meters, use the set port l2protocol-tunnel command.
2-503 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set port l2protoc ol-tunnel • 5 Laye r 2 prot o col.
2-504 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set port l2 prot ocol-tun nel Relat e d Commands clear .
2-505 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set p ort lacp -channel set port lacp-channe l T o se.
2-506 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set port lacp -cha nnel • Y ou ca n assi gn a m axi mu m of 8 p orts to a n admi nistr ative key .
2-507 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set port ma cro set port macro T o execute a co nfiguration ma cro on a per-port basis, us e the set port macr o comma nd.
2-508 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set port m acro T o configure t he QoS se ttings an d the tr usted bou ndary feature on the Cisc o IP Phone , you m ust enab le Cisco Disc overy Protocol (CD P) version 2 or la ter on t he p ort.
2-509 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set port ma cro Do you want to continue (y/n) [n]? Th.
2-510 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set port member ship set port membership T o set t he VLAN me mbership assig nment to a port, us e the set port membership command.
2-511 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set port membership Relat e d Commands set pvlan set .
2-512 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set port name set port name T o co nf igure a name for a port, use th e set port name comman d.
2-513 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set port negotiation set port negotiatio n T o enabl e or disab le the l ink negotiat ion prot ocol on th e specified port , use t he set port negotiation comm an d.
2-514 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set port prot ocol set port protocol T o enab le or dis able protoc ol members hip of po rts , use the se t port protocol co mman d.
2-515 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set por t protocol Relat e d Commands show port proto.
2-516 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set port qos set port qos T o specify wh ether an inter face is inter preted as a phy sical port or as a VLAN, use the set port qos comm and.
2-517 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s se t port qos This e x ample sho ws the output if yo .
2-518 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set por t qo s au toqos set port qos autoqos T o appl y the auto matic Qo S feature on a pe r-port basis, use the set port qo s autoqos command.
2-519 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set por t qos auto qos Relat e d Commands clear port .
2-520 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set por t qo s co s set port qos cos To set th e def ault val u e for all pa c kets th at hav e arri ve d throug h an un truste d p ort, use the set port qo s cos command.
2-521 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set port qos poli cy-source set port qos policy-source T o set the QoS policy source for all ports in the specifi ed module, use the set port qos policy-sourc e comm and.
2-522 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set p ort qos policy -source This e x ample sho ws the .
2-523 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set port qos t rust set port qos trust T o set the tr.
2-524 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set por t qo s tr ust Relat e d Commands set port qos s.
2-525 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set port qos trust-device set port qos trust-device T o co nfigure the t rus t mode on a por t on a speci fic device or module , use the set port qos trust-device comm and.
2-526 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set p ort qos trust -ext set port qos trust-ext T o conf igure the acce ss port on a Cisco I P phone co nnected to the switch po rt, use the set port qos trust- ext com mand .
2-527 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set port rsvp dsbm-election set port rsvp dsbm-electi.
2-528 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set po rt secur ity set port security T o con figure p ort secur it y o n a por t or r ange of po rts, use th e set p o rt se c uri ty command .
2-529 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set port security Defaults The def ault port securit y conf igurati on is as foll ow s: • Port secu rity is disable d.
2-530 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set po rt secur ity Enabling th e automati c conf iguration fea ture automa tically conf igures learned MA C addresses on secure ports.
2-531 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set port security This exampl e shows ho w to set the ag ing type on a port to in activity aging : Console> (enable) set port security 5/1 timer-type inactivity Port 5/1 security timer type inactive.
2-532 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set port sec urity-ac l set port security-acl T o specify the por t access control list (P A CL) mode, use the set port security-a cl comm and.
2-533 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set po rt secur ity-acl ACL interface is set to merge mode for port(s) 3/4.
2-534 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set po rt speed set port speed T o conf igure the spee d of a port interf ace, use the set port speed comman d.
2-535 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set port sync-restart-delay set port sync-restart-del ay T o s pecify the s ync hroni zati on re sta rt d ela y of a por t, use t he s et port sync- resta rt-dela y com mand.
2-536 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set po rt tr ap set port trap T o enab l e or di sable .
2-537 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set port unicast -flood set port unicast-fl ood T o configure t he swit ch to drop Unicast Flood traffic on an Ether net port, use the set po rt unicast-flood comm and.
2-538 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set p ort uni c a s t- fl ood This exam ple sh ows how .
2-539 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set port vlan-mapp ing set port vlan-mapping T o configure VLAN mapp ing on a per-port basis, use the set port vlan-ma pping comman d.
2-540 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set port vl an-m a pping This exam ple sh ows how to enabl e p ort V LAN m appi ng and to c on figure V LAN ma ppin g o n a n individual port .
2-541 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set port vo ice inter face dh cp set port voice interface dhcp T o set t he port v oice interf ace for the DHCP , TFTP , an d DNS serv ers, use the set port voi ce in t er fa ce dhcp comma nd.
2-542 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set port voi ce i nterface dhcp Exam ples This example .
2-543 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set port vtp set port vtp T o enable or disabl e VLAN Trunk Protocol (VTP) on a per-port basis, use th e set port vt p command.
2-544 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set power re dundanc y set power redundan cy T o tu rn redun da ncy b etwee n the p ower suppli es on or o ff, use the set power r edundancy comman d.
2-545 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set prompt set prompt T o change the prompt fo r the CLI, use the set prompt com mand. set prompt pr ompt_ stri ng Syntax Descript ion Defaults The de fault is the prom pt is set to Console >.
2-546 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set p rot o c o lf il ter set protocol filter T o acti .
2-547 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set pvlan set pvlan T o bind the iso lated or co mmunit y VLAN to the prim ary VLAN and assign the is olated or community ports to the pri vate VLAN , u se the set pvlan co mma nd.
2-548 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set pv lan Exam ples Th is example shows ho w to map VL.
2-549 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set pvla n mapping set pvlan mapping T o map isolated or commun ity VLANs to the primary VLAN on the pr omiscuous port, use the set pvl an mapping comm an d.
2-550 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set pvlan ma pping Relat e d Commands clear pvlan mappi.
2-551 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set qos set qos T o turn on or turn of f QoS functionality on the switch, use the set qos comm and. set qos enable | disable Syntax Descript ion Defaults The default is QoS functionalit y is disabled.
2-552 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set q os a c l d efa ult- a cti on set qos acl defau lt-action T o set t he ACL default actions, use the set qos acl default-action command.
2-553 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set qos acl default-action Usage Guid el i nes Configurati ons you make by enter ing this co mmand ar e saved to NVRAM and th e switch an d do not requir e that you ente r the commit comm an d.
2-554 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set qo s acl ip set qos acl ip T o cre ate or add IP a ccess lists , use th e set qos acl ip comm and.
2-555 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set qos acl ip Defaults The def ault is there ar e no A CLs. Comma nd T ypes Swit ch co mman d. Command Mode s Pri vile ged.
2-556 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set qo s acl ip The optio nal micr oflow micr ofl ow _na me an d aggrega te aggr egate_name key words and v ariables are used to c onfigure p olici n g in th e A CE.
2-557 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set qos acl ip If the oper ator is positioned af ter the so urce and source-wildca rd, it m ust match t he source p ort.
2-558 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set qo s acl ip This example shows ho w to define an ICMP acc ess list: Console> (enable) set qos acl ip icmp_acl trust-dscp my-micro icmp 1.
2-559 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set qos acl ipx set qos acl ipx T o defin e IPX access lists, use the set qos acl ipx command.
2-560 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set qo s acl ipx The optio nal aggregate aggr e ga te_nam e keyword an d variab le a r e use d to c onfigu re po lic ing in th e A CE.
2-561 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set qos acl ipx Exam ples Th is exam pl e s h ows how to cr ea t e an I P X A CE: Console> (enable) set qos acl ipx my_IPXacl trust-cos aggregate my-agg -1 my_IPXacl editbuffer modified.
2-562 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set qo s acl mac set qos acl mac T o define MAC access lists, use the set qos acl mac command.
2-563 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set qos acl mac When you ent er the ACL name, foll ow.
2-564 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set qo s acl mac Relat e d Commands clea r qos acl comm.
2-565 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set qos acl map set qos acl map T o attach an A CL to a specifie d port or VLAN, use the set qos acl map comm and.
2-566 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set qo s acl map This e xample sho ws ho w to attach an A CL to a VLAN: Console> (enable) set qos acl map ftp_acl 4 ACL ftp_acl is attached to vlan 4.
2-567 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set qos autoqos set qos autoqos T o apply automat ic QoS settings to all ports on the switch , use the set qos autoqos command.
2-568 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set q os b r id ged -m ic rof low- pol icin g set qos b.
2-569 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set qos cos-cos-m ap set qos cos-co s-map T o set the CoS- to-CoS map ping on a globa l basis, use the set qos c os-cos-map co mmand .
2-570 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set qo s co s-dsc p-map set qos cos-dsc p-map To set the CoS-to-DSCP mapping, use th e set qos cos-dscp-ma p command.
2-571 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set qo s drop-thr eshold set qos drop-threshold T o p rogram t he tr ansmi t-queu e an d rece iv e-queue dr op thre sholds on all ports in the system, use t he set qos drop-thr eshold command.
2-572 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set qos drop- thres hol d The number pr eceding the q letter in the port type dete rmines the number of t he queues that the har dware supports.
2-573 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set qos dscp- cos-map set qos dscp-c os-map To set the DSCP-to-CoS mapping, use the set qos dscp-cos-map command .
2-574 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set qos dsc p-mutat io n-m a p set qos dscp-mutat ion-map T o conf ig ure a DSCP mutation map, use the set qos dscp-mutation-map command .
2-575 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set qos dscp-m utatio n-table -map set qos dscp-mutat ion-table-map T o conf igure the DSCP mutation table map, use the set qos dscp-mutation-table-map comm and.
2-576 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set qos ds cp-r ewri te set qos dscp-rewrite T o glob a.
2-577 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set qo s ipp rec -d sc p- ma p set qos ipprec -dscp-map T o set t h e IP prece dence- to-DSCP map, u se the set qos ippre c-dscp-map comm and.
2-578 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set qos ip prec -ds cp-map Exam ples Th is exampl e sh .
2-579 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set qos mac-cos set qos mac-c os T o set the C oS value to the M A C addre ss an d VLAN pa ir, use the set qos mac-cos comm and.
2-580 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set qo s map set qos map T o map a specif ic CoS value to the transmit- or rec eiv e-priority queues an d the thresholds per a vail able priority queue for all ports , use the set qos map comma nd.
2-581 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set qos map Comma nd T ypes Swit ch co mman d.
2-582 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set qo s map This example shows ho w to map the CoS val.
2-583 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set qo s p olic ed-d s cp- map set qos policed -dscp-map T o set the m apping of p oliced in -profile DSCPs , use the set qos policed-dscp-map command.
2-584 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set qo s polic er set qos policer T o c r eat e a po li ci ng rule f or ACL, us e t he set qos policer co mman d.
2-585 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set qos policer The exc ess rate must be greater than or equal to the norma l rate.
2-586 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set qos po lic y-sou rce set qos policy-source T o set t he QoS polic y source, use th e set qos policy-source com mand.
2-587 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set qo s policy-s ource This example shows the output.
2-588 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set qo s rsvp set qos rsvp T o turn on or turn of f the.
2-589 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set qos rsvp This e x ample sho ws how to set t he polic y timeout in terv al: Console> (enable) set qos rsvp policy-timeout 45 RSVP database policy timeout set to 45 minutes.
2-590 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set qos rxq-ra tio set qos rxq-ratio T o set the amount of p acket b uffer memor y allocated to h igh-priori ty incoming traf fic and low- priority incomin g traf fic, use the set qos rxq-r atio command .
2-591 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set qos rxq- ratio Exam ples This e xample s ho ws ho w to set t h e rece ive-qu eue size ratio: Console> (enable) set qos rxq-ratio 1p1q0t 80 20 QoS rxq-ratio is set successfully.
2-592 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set qo s st atisti cs export set qos statistics ex port T o globally enable or disable statistics dat a gathering from hardw are, use the set qos statistics expo rt comm and.
2-593 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set qos stat istics export aggr egate set qos statist.
2-594 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set qos sta ti st ic s expor t des t ination set qos statistics ex port destinatio n T o specify the statisti cs data exp ort destination address, use the set qos statistics export destination comm and.
2-595 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set qos statistic s export destination Relat e d Comm.
2-596 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set q os sta ti st ics e x por t in te rva l set qos st.
2-597 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set qos stati stics export port set qos statistics ex port port T o enable or disa ble statist ics data e xport on a por t, u s e t h e set qos statis tics ex port po rt comm and.
2-598 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set qo s txq -rati o set qos txq-ratio T o set the amount of pack et b uf fer memory allocat ed to high-p riority tra f f ic and lo w-priority traf fic, use the set qos txq-ra tio comma nd.
2-599 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set qos txq-ratio Exam ples Th is e xample shows ho w to set the transmit-queue size ratio: Console> (enable) set qos txq-ratio 2q2t 75 25 QoS txq-ratio is set successfully.
2-600 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set qo s wred set qos wred T o conf igure the W RED thre shold pa rameters fo r the specif ied por t type, us e the set qos wred comm and.
2-601 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set qos wred Relat e d Commands clear qos co nf ig sh.
2-602 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set qo s wrr set qos wrr To specify the weights th at d etermine ho w many pa ckets will transmit out of one queue before switchin g to the othe r queue, use the set qos wr r comm and.
2-603 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set qos wrr For 1p2q2 t and 2q2t , on ly two queues can be set; the third queue is strict priority . For 1p3q1 t , three qu eues can b e set; a fourth queue is strict priority .
2-604 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set radius attribute set radius attribute T o set attrib utes to the RADIUS A CCESS_REQUEST pack et, use the set radius attribute command.
2-605 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set radi us deadti me set radius dea dtime T o set the time to skip RADIUS serv er s that do not re ply to an au thentic ation request , use th e set radius deadtime comman d.
2-606 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set radius key set radius key T o set the encryptio n and authenticatio n for all communi cation betwee n the RADIUS client and the serv er , use th e set radius key comma nd.
2-607 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set ra dius retrans m it set radius retransmit T o speci fy the numbe r of tim es the RA DI US servers are trie d be fore giving up on the server , use the set radius retransmit com mand.
2-608 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set radius server set radius server T o set up the RA DIU S server, use the set radius ser ver command.
2-609 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set ra dius time out set radius timeout T o set the time between retransm issions to the RADIUS server , use the set radius timeout comman d.
2-610 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set ra te - li mit set rate-limit T o enable, disable, or set t h e Layer 2 rate li miters, use the set rate-limit command.
2-611 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set ra t e- l im i t • The sof tware alloc ates an L TL in dex for th e fram es. • The L TL index is sub mitted to the f orwardin g engine for aggreg ate rate li miting of all the associated fram es.
2-612 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set rcp usern ame set rcp username To sp eci fy you r userna m e for r cp f ile tr ans fers, use th e s et rcp usern ame command.
Chapter 2 Catalyst 6500 Series Sw itch and ROM Monitor Comm ands set rgmp 2-613 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 22 set rgmp T o enab le or dis able the Ro uter -Ports Group Ma nage ment P rotoc ol (RGM P) featur e on the swi tch, us e the set r gmp command.
2-614 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set rspan set rspan T o create re mote Switched Port An alyzer ( SP AN) sessions, use the set rspan comm and.
2-615 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s s et rs pa n Defaults The de faults are as fo llows: • Remote SP AN is disabled. • No VLAN f ilterin g.
2-616 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set rspan If you pr ovide a session numbe r , b ut the .
2-617 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set secur ity acl adj acency set security acl adjac ency T o set an entr y for th e adjac ency ta ble, u se the set securi ty acl adjace ncy command .
2-618 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set sec urity a cl a rp-inspec tion set security acl arp -inspecti on T o configure Ad dress Res olution Proto col (ARP) inspection fe ature s, use the set se curity acl arp-inspection comman d.
2-619 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set security acl arp-inspection The follo wing MA C a.
2-620 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set sec urity a cl c apture-por ts set security acl cap.
2-621 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set secur ity acl cr am set security acl cra m T o enable a tes t r u n o f the C RAM fe atu r e o r to en able the CRAM fe ature, use the se t s ec u rit y ac l cra m comm and.
2-622 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set secu r it y acl cram This exam ple sh ows how to ma.
2-623 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set security acl feature ratelimit set security acl featu re ratelimit T o s pecify a r ate limi t in pa ckets p er se co nd for AR P insp ect ion, DH CP sn oopin g, a nd 802.
2-624 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set secu r it y acl ip set security acl ip T o c reate a n ew en try i n a stan dard IP VA CL a nd ap pend th e ne w en try at th e end of t he VA CL, u se the set security a cl ip command.
2-625 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set security acl ip deny Block s t r aff ic f rom the source I P a dd ress. src_ip_spec Source IP addre ss and the sourc e mas k.
2-626 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set secu r it y acl ip Defaults Ther e are no def ault ACLs an d no defa ult ACL-V LAN mappi ngs. By defa ult, ARP is ena bled.
2-627 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set security acl ip • Use the ke yword any as an abbrev iation for a sour ce and sou r ce-wil dcar d of 0.
2-628 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set secu r it y acl ip If a L ay er 4 pr otoc ol i s sp.
2-629 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set security acl ip Console> (enable) set security acl ip IPACL1 redirect 3/1 ip 3.7.1.2 0.0.0.255 host 255.
2-630 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set secu r it y acl ipx set security acl ipx T o cr ea te a new entry in a stan dard IPX V ACL and to ap pe nd the new entry a t the e nd of the V ACL, use the set security acl ipx command .
2-631 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set security acl ipx If you use the capture keyword, the ports that captu re the traf fic and t ransmit out are spe cified by ent erin g th e set se c uri t y a cl ca ptu r e-p or ts co mmand .
2-632 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set secu r it y acl ipx Relat e d Commands clea r secur.
2-633 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set security acl log set security acl log T o c on figure th e s ecur i ty ACL log tab l e, us e th e set secur ity acl log comman d.
2-634 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set secu r it y acl log This exampl e shows ho w to disabl e rate lim iting: Console> (enable) set security acl log rate-limit 0 CAUTION: Rate limit for logging eligible packet is disabled.
2-635 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set security acl mac set security acl mac T o cr eat .
2-636 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set secu r i t y acl mac • Must start with an alp ha .
2-637 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set security acl mac commit set security a cl map set.
2-638 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set secu r i t y acl map set security acl map T o map an e xisting A CL to a port or to a VLAN or to enable A CL statistics, use the set secur ity acl map comm and.
2-639 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set security acl map If per-VLAN stati stics are e nabled on a VLAN, subseque nt maps co nfigured on the same VLAN will also ha ve per -VLAN statistics enabled.
2-640 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set secu r i t y acl map Relat e d Commands clea r secu.
2-641 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set security acl stati stics set security acl statisti cs T o enable ag gre gated A CL statis tics on a per -A CL basis , use the set security acl statistic s command.
2-642 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set sn mp set snmp T o enable or disable the processing of SNMP requests to the switch and SNMP traps from the switch, use the set snmp comm and.
2-643 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set snmp access set snmp access T o d efine th e acc ess ri ght s of an SN MP grou p, u se the set snmp access command.
2-644 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set sn mp acc ess • notify notifyvie w is NULL OID. • cont ext contextname is a NULL string. Comma nd T ypes Swit ch co mman d.
2-645 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set snmp ac cess-list set snmp access-list T o specify an access lis t number fo r a host or group of host s, use the set snmp access-list command.
2-646 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set sn mp acc ess-li st Relat e d Commands clear sn mp .
2-647 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s se t s nm p b u ffe r set snmp buffer T o set t h e siz e of t h e SNMP UDP sock et recei ve b u f fer , us e the set snmp buffer command.
2-648 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set sn mp cha ssis-a lias set snmp chassis-alias T o set t he chassis al ias and sa ve it i n NVRAM and in the c onfi guration f ile, use the se t snmp chassis-alias command.
2-649 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set snmp community set snmp community T o set SNMP comm unities and associat ed access type s, use the set snmp community command.
2-650 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set snmp communi ty There are three co nf igurab le SNMP communi ties, one fo r each acce ss type.
2-651 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set snmp community-ext set snmp community-ext T o set ad ditional c ommunity stri ngs, use the set snmp community-ext comman d.
2-652 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set snmp community-ext This e xample sho ws ho w to cha.
2-653 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set snmp e xten ded rmon n etflow set snmp exten dedrmon netfl ow T o enabl e or disab le the SNMP extend ed RMON support for t he N AM modul e, use the set snmp extendedrmon netflow com mand.
2-654 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set sn mp gr oup set snmp group T o establi s h th e r elat i ons h ip bet ween an SNMP g rou p an d a us e r with a sp ecif ic security mo d el, use th e set snmp group command.
2-655 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set snmp ifalias set snmp ifalias T o set t he SNMP inte rface alias, us e the set snmp ifalias co mman d.
2-656 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set sn mp info rm set snmp inform T o conf igure the handling of SNMP info rm requests, use the set s nmp inf orm co mmand.
2-657 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set snmp inform If the number of inf orm requests that are pending in the queue exceeds the configured l imit, the oldest info rm request is remov ed to free up space f or new inform re quests.
2-658 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set sn mp noti fy set snmp notify T o set the notifyname entry in the snmpNotifyT able and the n otifytag entry in the snm pT ar getAddrT able, use the set snmp notify command.
2-659 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set s nmp rm on set snmp rmon T o ena ble or disab le SNMP RM ON support, use the se t snmp rmon comma nd.
2-660 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set snmp rm onm e mory set snmp rmonme mory T o set t he memory usage limit in pe rcentage, use th e set snmp rmonmemory command.
2-661 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set snmp targetad dr set snmp t argetadd r T o conf igure the SNMP tar get address entr ies in the snmpT argetAdd ressT able, use the set snmp targetaddr co mmand .
2-662 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set snmp targ etadd r Usage Guid el i nes If you us e s.
2-663 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set sn mp targetp arams set snmp targ etparams T o co.
2-664 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set snmp targ etpara ms Exam ples This example sho ws h.
2-665 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set snmp trap set snmp trap T o enable or disable the diffe rent SNMP traps on the system or to add an entry into the SNMP authenti cation trap recei ver ta ble, u se the set sn mp tr ap command.
2-666 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set sn mp tra p Defaults The def ault is SNMP traps are disabled. Comma nd T ypes Swit ch co mman d. Command Mode s Pri vile ged.
2-667 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set snmp trap Console> (enable) This e xample shows ho w to enable all traps: Console> (enable) set snmp trap enable All SNMP traps enabled.
2-668 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set sn mp user set snmp user T o conf igure a ne w SNMP user , use the set snmp user comma nd.
2-669 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set snmp use r This e x ample sho ws how to set a spe.
2-670 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set sn mp view set snmp view T o conf igure the SNMP M IB vie w , use the set snmp view comma nd.
2-671 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set snmp view This e x ample sho ws the response whe .
2-672 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set sp an set span T o enable or disa ble SP AN and to set up the switch por t and VLAN analyzer for mu ltiple SP AN sessions, use the set span command.
2-673 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set span Defaults • SP AN is disabled, • No VLAN f ilterin g is enabled. • Multicast is enabled. • Input pac kets ar e disa bled.
2-674 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set sp an T o speci fy a unique SP AN session ac ross all types of SP AN sessions ( local SP AN, R SP AN, and ESP AN), ent er th e session session_ number op tion.
2-675 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set spant ree backb onefast set spantree backbone fast T o en able or disa ble t he span ning t ree Backbo neF ast C on ver gence feat ure, use th e set s pantr ee backbonefast comman d.
2-676 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set spantr ee bpdu-f il t er set spantree bpdu-filter T o enable or disable BPDU pack et fi lterin g on a por t, use the set spant ree bpdu-filt er comman d.
2-677 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set spant ree bpdu- guard set spantree bpdu-guard T o ena ble or dis abl e span ning tree BPDU g uard on a port, use the set spantree bpdu-guard comman d.
2-678 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set spantr ee bpdu-s ke wing set spantree bpdu-skewin g T o en able or disable collection of t h e sp anning tree BPDU sk ewing detect ion statist ics, us e the set spantree bpdu-skew ing command .
2-679 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set s pan tre e cha nne lco st set spantree channelco st T o set t he channel p ath cost and to auto matically a djust the cha nnel port costs, use the set spantree channelcost command .
2-680 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set spantr ee chann elcost Relat e d Commands clear la .
2-681 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set spantree channel vlancost set spantree channelvla.
2-682 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set spantr ee defau lt cos tmode set spantree defaultcostmode T o s peci fy t he s p anni ng tre e de fau lt por t cost mode , use th e set spa n tree defau lt costm ode com ma nd .
2-683 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set spantree defaultcostmode Exam ples Th is exampl e.
2-684 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set spa ntree disa ble set spantree disable T o disabl e the spanni ng tree alg orithm for all VLA Ns or a specif ic VLAN or disable s panning tree inst an ce , us e th e set spa ntree disable command.
2-685 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set spant r ee disable This e x ample sho ws how to disa ble spanning tree fo r a specif ic instance: Console> (enable) set spantree disable mistp-instance 2 MI-STP instance 2 disabled.
2-686 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set spantr ee enabl e set spantree enabl e T o enable the span ning tree alg orithm fo r all VLANs, a specif ic VLAN, a specif ic instance, or all inst an ce s, use th e set spantr ee enable com mand.
2-687 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set spantr ee enable Relat e d Commands set spantree .
2-688 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set spantr ee fwddel ay set spantree fwddelay T o set the bridge forw ard delay for a VLAN or an instance, use the set spantree fwddelay command .
2-689 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set spantree fwddelay This e xample shows ho w to set.
2-690 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set spantr ee globa l-d efault set spantree globa l-default T o s et th e gl ob al s ta tes on th e sw it ch, use th e set spa ntree globa l-def ault command.
2-691 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set spantr ee global -default This exampl e shows ho .
2-692 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set spantr ee guard set spantree guard T o enabl e or disab le the spa nning tr ee roo t guard or loop gua rd feat ure on a per-port basis, use t he set spantree guar d command.
2-693 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set spantree guard Exam ples Th is exampl e sh ows how to en abl e r oot gua rd : Console> (enable) set spantree guard root 5/1 Rootguard on port 5/1 is enabled.
2-694 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set s pan tr ee h e llo set spantree hello T o set the bridge hello time for a VLAN or an instance, use the set spantree hello command.
2-695 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set spantree hello This example sho ws how to set the spantree hello time for an instance to 3 seconds: Console> (enable) set spantree hello 3 mistp-instance 1 Spantree 1 hello time set to 3 seconds.
2-696 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set s pan tr ee li nk - ty pe set spantree link-type T o conf ig ure the link type of a port, use the set spantr ee link-type co mmand.
2-697 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set spantr ee macreduction set spantree macreduction T o enable or disable the spanni ng tree MA C address reduct ion feature, us e the set spantree macr educti on comman d.
2-698 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set spantr ee maxage set spantree maxage T o set the bridge max imum aging time for a VLAN or an instance , u se the set spantree maxag e comm and.
2-699 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set spantr ee maxage This e xample shows how to se t .
2-700 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set sp antree m ode set spantree mode T o configure the type of Sp anning T ree Proto col mode to run, use the set spantree mode comman d.
2-701 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set span tree mode If yo u ch a n g e the sp ann ing .
2-702 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set sp ant ree mst set spantree mst T o co nf igure the.
2-703 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set spantree m st Ente rin g th e set spantree mst mod/port auto comman ds reverts a port th at is in pr e-stand ard M ST mode back to stan dard M ST mode.
2-704 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set spantr ee mst co nfi g set spantree mst config T o change the MST regi on informa tion, us e the set spantree mst conf ig command.
2-705 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set spantree mst config Exam ples Th is example shows.
2-706 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set s pan tr ee m st li n k -ty pe set spantree mst link-type T o conf ig ure the link type of a port, use the set spantree mst link-type co mmand.
2-707 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set spantree ms t maxhops set spantree mst maxhops T o s et th e spa nni ng tr ee h op co unt , us e t he set spantree mst ma xhops co mman d.
2-708 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set s pan tr ee m st v lan set spantree mst vlan T o conf ig ure the mapping of VLANs to an MST instance , use the set spantree mst vla n command.
2-709 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set sp ant ree po rt cost set spant ree port cost T o set the path cost for a por t, use the set span tree port cos t comma nd.
2-710 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set sp ant ree por tcost Comma nd T ypes Swit ch co mman d.
2-711 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set spantree portfast set spantree port fast T o allo w a port that is connected to a single workstatio n or PC to start faster when it is connec ted, use the set spantree portfast command.
2-712 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set spantr ee portfas t bpdu-fi lt er set spantree port.
2-713 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set span tree portfa st bpdu-guard set spantree portfast bp du-guard T o ena ble o r di sab le spanni ng tree Po rtFast BPDU guard o n a por t, u se the se t spantree port fast bpdu-guard comman d.
2-714 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set spantr ee portins tancecos t set spantree port instanceco st T o assign the pa th cost of the port for the sp ecified in stances , use the set spantre e portinstanceco st comm and.
2-715 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set spantree po rtinstancecost Exam ples Th ese examp.
2-716 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set spantr ee portins tancepri set spantree portinstan cepri T o set the p ort prior ity for inst ances in th e trunk p ort, u se the set spantree portinstancepri comman d.
2-717 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set spantree portinstan cepri This exampl e shows ho .
2-718 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set spantr ee portp ri set spant ree port pri T o s et the brid ge pr iori ty for a s pa nning t ree po rt, use t h e set spantree portpri command .
2-719 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set sp ant re e po rtv l an cos t set spantree port vlancost T o assign a lower path cost to a set of VLANs on a port , use the set spantree port vlancost command.
2-720 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set spa ntr ee portv la ncost Usage Guid el i nes Follo.
2-721 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set spantr ee portvlanp ri set spantree portvlanpri T o s et the port priority fo r a subset of VL ANs in the trun k port, use the set sp antree port vlanp ri comm and.
Chapter 2 Catalyst 6500 Series Sw itch and ROM Monitor Comm ands set spantree priority 2-722 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 22 set spantree priority T o set th e bridge priority for a VLAN or an inst ance whe n PVST+ or MI STP is runnin g, use the set spantree priority command.
2-723 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set spantree priority This exam ple sh ows how to set the br idge pri orit y fo r M ST inst anc e 0: Console> (enable) set spantree priority 28672 mst 0 MST Spantree 0 bridge priority set to 28672.
2-724 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set sp antree r oot set spantree root T o set the primary o r secondar y root fo r specifi c VLANs, all VLANs of the switch, or an instance, use the set spantree root command.
2-725 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set spantree root This c omm and incr e ases p ath co sts to a value g reate r than 3 000. If you en able M ISTP , you cann ot set th e VL AN r oot.
2-726 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set sp antree r oot VLANs 1-10 bridge hello time set to 2 seconds. VLANs 1-10 bridge forward delay set to 13 seconds.
2-727 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set spantree uplinkfast set spantree uplinkfast T o enab le fast switcho ver to altern ate ports when the root port fails, use the set spantr ee uplinkfast command.
2-728 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set spantr ee uplinkf ast Y ou do no t have to turn on .
2-729 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set ss h mode set ssh mode T o set t he Secu re Shell (SSH) v ersion, use the set ssh mode command .
2-730 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set ss h mode Relat e d Commands clear ss h mode set au.
2-731 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set summertime set summertime T o spec ify whet her the sys tem s hould set t he clo ck ahea d o ne hou r during daylig ht saving time , use the set summertime command.
2-732 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set su mmertim e This exam ple sh ows how to prevent th.
2-733 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set system baud set system baud T o set th e consol e port ba ud rate, u se the set syst em baud comman d.
2-734 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set system con tact set system contact T o i d en tif y a co ntac t p ers on for t h e sys te m, use th e set sy stem cont act co mmand .
2-735 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set system core-du mp set system core-dump T o enable or disable the core dump feature , use the set system core-dump co mmand .
2-736 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set system cor e-file set system core-file To specify the cor e image filename, use t h e set s ys te m core- file comm and.
2-737 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set system countryco de set system countryco de T o s peci fy t he c ou ntry w here the syste m is physi ca lly loc ate d, us e the se t system countrycode comm and.
2-738 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set system cra shinfo set system crashinfo T o permit the system t o write a crash information f ile, use t he set system crashinfo comma nd.
2-739 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set system cr ashinfo Relat e d Commands show system.
2-740 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set system cro ssbar -fa llback set system crossbar-fal lback T o selec t the ac tion tak en when th e Switch Fabr ic Module fails, u se the set syst em crossbar -f allback comm and.
2-741 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set system highava ilability set system highavailability T o enable or disable h igh system a vai lability fo r the switc h, use the set system highav ailability comm an d.
2-742 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set syst em higha vailabi lity ve rsi oning set system .
2-743 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set system highavailability versioning Exam ples This.
2-744 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set sy stem info-l og set system info-log T o log the output of speci fied show com mands to a server for tro ubleshoo ting and de bugging, use t he set system inf o-log comma nd.
2-745 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set system info-log Usage Guid el i nes When you enter the sh ow comman d whos e outp ut is t o be l ogg ed, y ou mus t type a del imiti ng chara cter with no sp ac es on ei ther side of the com ma nd.
2-746 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set sy stem l ocation set system location T o identify the location of the system, use the set sy stem l oca tion command.
2-747 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s s et s yst em mo dem set system modem T o enable or disable modem co ntrol lin es on the con sole port , use the set system modem command.
2-748 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set sy stem na me set system name T o conf igure a name for the system , use the set system name comman d.
2-749 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set system profile set system profile T o conf igure a system prof ile file, u se the set system prof ile command .
2-750 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set sy stem profil e • The ALL_ MODULE_PO R TS ke ywo.
2-751 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set syst em supervisor- update set system supervisor-update T o con figure t he Er asa ble Progr am mabl e L ogic Device (E PLD) upg rade p roce ss, use the set sy stem supervisor -update com mand .
2-752 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set syst em su per viso r-updat e This exam ple sh ows how to disab le EPL D up gra des : Console> (enable) set system supervisor-update disable Supervisor EPLD update during reset is disabled.
2-753 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s se t system switchmode allow set system switchmode allow T o conf igure the switch ing mode fo r the syste m, use the set system switch mode allow command.
2-754 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set sy stem switch mode a llow This example sho ws how to set the switching mode to bus- only: Console> (enable) set system switchmode allow bus-only System switchmode allow set to bus-only.
2-755 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set system syslog-dump set system syslog-dump T o write system messag es in the syslog bu ffer to a flash f ile before the system fail s, use the set system syslog-dump co mmand.
2-756 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set sy stem s yslog-f ile set system syslog-file T o speci fy the f lash de vice and f ilename for the sys log dump when the system f ails, use the set system syslog-file comm and.
2-757 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set tacacs attempts set tacacs attempts T o configure t he m aximum number of login a ttempt s allowed to the T A CA CS+ server, use the set taca cs attemp ts com mand .
2-758 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set taca cs directedre quest set tacacs directed request T o en able or disa ble the T A CAC S+ di rected- request option, u se th e set tacacs direc tedrequest comman d.
2-759 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set tacacs key set tacacs key T o set the ke y for T A CA CS+ authentication and encry ption, use the set ta ca cs ke y co mmand.
2-760 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set tacacs server set tacacs serv er T o de fin e a T A CAC S+ ser ver , use the set taca cs s erve r co mm and.
2-761 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set tacacs timeout set tacacs time out T o set t he response tim eout interv al for the T A CA CS+ serv er daemon , use the se t taca cs timeou t command.
2-762 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set test diagf ail-act ion set test diagfail-action T o set t he action th at the supervisor en gine tak es when a diagnos tics test f ails, u se the set tes t diagfail-ac tion command.
2-763 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set test di aglevel set test diaglevel T o s et th e di a gnos tic l evel, use t he set te st diaglevel comm and.
2-764 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set ti me set time T o change the time of day on the system cl ock, use the set time com mand.
2-765 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s se t tim ez on e set timezone T o set the time zone for the system, use the set timezo ne com mand.
2-766 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set traffic m on itor set traffic monitor T o conf igure the thresh old at wh ich a hig h-traf fic log w ill be generated, u se the set traffic monitor comm and.
2-767 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set trunk set trunk T o conf igure trunk ports an d to add VLANs to the allow e d VLAN list for existin g trunks, use the set trunk comm and.
2-768 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set trunk The fo llo wing usage guidel ines apply when .
2-769 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set trunk This exam ple sh ows how to co nfigure a tr un k wi thou t a ny VLA Ns: Console> (enable) set trunk 7/1 on none dot1q Removing Vlan(s) 1-4094 from allowed list.
Chapter 2 Catalyst 6500 Series Sw itch and ROM Monitor Comm ands set udl d 2-770 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 22 set udld T o enab le or dis able the UDLD i nform ation displ ay on s pecif ied port s or glo ball y on all ports , use t he set udld command.
2-771 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set udld This exam ple sh ows how to disab l e the UD LD m es sag e displ ay f or po rt 1 o n m odu le 2: Console> (enable) set udld disable 2/1 UDLD disabled on port 2/1.
2-772 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set udld aggres si ve-mod e set udld aggressive-mo de T o enable or disable the UDLD aggr essi ve mode on sp ecif ied ports, us e the set udld aggressiv e -mode comm and.
2-773 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set udld interval set udld interval T o set t he UDLD message inte rva l timer , use the set udld interv a l com mand.
2-774 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set vl an set vlan T o group p orts int o a VLAN, set the private VLAN type , map or un map VLA Ns to or f rom an instance , specify a n 802.
2-775 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set v lan Defaults The de fault values ar e as follows: • Switche d Ethern et ports and Ether net repe ater por ts are in VLA N 1.
2-776 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set vl an If you spe cify a r an ge of V LA Ns, y ou cann ot u se the VLAN name . If you ente r the mistp-instance none co m m a nd , the specified VLANs are unmapped from any instance they are mapped to.
2-777 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set v lan Exam ples Th is example shows how to set VLAN 850 to incl ude ports 3 throu gh 7 on modul e 3: Console> (enable) set vlan 850 3/3-7 VLAN 850 modified.
2-778 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set vl an Relat e d Commands clear co nfi g pvlan clear.
2-779 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set vlan mapping set vlan mapping T o map 802.1Q VLAN s to ISL VLANs, use the set vlan mapping comman d.
2-780 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set vl an mappi ng This e xample sho ws the display if .
2-781 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set vlan verify-port-provisioning set vlan verify-por.
2-782 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set vmps con fig-fil e set vmps config-file T o set the ba ck up c on fig ur at io n f il e fo r the VLAN Membership Policy Se rve r (VMPS), us e the set vmps conf ig-f ile comman d.
2-783 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set vmps config-file This exam ple sh ows to disa ble.
2-784 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set vmps dow nloa dm et hod set vmps down loadmeth od T o spec ify wh ether to use TFTP or rcp to do wnload th e VMPS da tabas e, use t he set vmps downloadmethod comman d.
2-785 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set vmps downl oadserver set vmps downloadserver T o spec ify the IP ad dress of t he TFTP o r rcp server from which the VMPS data base is download ed, use the set vmps downloadserver com mand.
2-786 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set vm ps ser ver set vmps server T o conf igure the VMPS, use the se t vmps s erver comman d.
2-787 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set vmps server Relat e d Commands clear vmps serv er.
2-788 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set vmps state set vmps state T o enable or disable VMPS, use the set vmps state co mman d. set vmps st ate { enable | disable } Syntax D escr i pti on Defaults By defau lt, VMPS is di sabled.
2-789 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set vtp set vtp T o set t he options for VTP , us e the set vtp comm and.
2-790 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set vt p Command Mode s Pri vile ged.
2-791 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set vtp • The unknown keyword al lows you to co nfigur e the behavior of the sw it ch da taba ses th at it c an not interpret.
2-792 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands set vt p This example shows ho w to set the VTP password and hide it in the co nfiguration: Console> (enable) set vtp passwd Sa7r12ah hidden Generating the secret associated to the password.
2-793 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s set vtp pruneeligible set vtp pruneeligib le T o specify which VTP dom ain VLANs are pruning elig ible, use the set vtp pruneeligible com mand.
Chapter 2 Catalyst 6500 Series Sw itch and ROM Monitor Comm ands show ac countin g 2-794 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 22 show accou nting T o di splay ac counti ng setup and c onfigurat ion infor mati on on t he sw itch , us e the show ac counti ng comm and.
2-795 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show ac c oun ting Overall Accounting Traffic: Starts.
2-796 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show ac coun ting Relat e d Commands set accounting com.
2-797 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show acl log show acllog T o display the status of A CL log ra te limitin g, use the show acllog command .
2-798 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show ac l mac -packet -classify show acl ma c-packe t-cl assify T o displa y a list of VLANs th at hav e the MA C-based A CL feature en abled, use t he show acl mac-pack et-classi fy comm and.
2-799 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show a clmerge algo show aclme rge algo T o display informat ion about the A CL merge algorithm, use the show aclmerge algo command .
2-800 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show alia s show alias T o di splay a li sti ng of de fined com mand alia ses, use the show alias command .
2-801 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show ar p show arp T o dis pla y the ARP t able , use the show arp comman d. show arp [ ip_addr | hostnam e ] [ noalias ] Syntax Descript ion Defaults Thi s command has no de fa ult set tings.
2-802 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show au the nticati on show authen tication T o display authentica tion informatio n, use the show au thenticat ion co mm and.
2-803 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show authorization show authorizatio n T o display auth orization setup a nd config uration inform ation on the swit ch, use the sho w author ization comm and.
2-804 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show au tos hu t show autoshut T o display the automati c module sh utdo wn conf iguratio n and cu rrent status information , use the show autoshut command .
2-805 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show bann er show banne r T o v iew the messa ge of t.
2-806 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show bo ot show boot T o displa y the conte nts of the BO OT enviro nment vari ables and the config uratio n regis ter settin g, use the show boot command.
2-807 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show boo t device show boot de vice T o display the NAM boot stri ng stored in NVRA M, use the show boot device comm and.
2-808 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show ca m show cam T o display CAM table entr ies, use the show c am command.
2-809 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s sho w ca m 1 00-80-24-1d-d9-ed * 1/2 [ALL] 1 00-80-24.
2-810 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show ca m agi ngtime show cam ag ingti me T o display CAM aging time info rmation for all conf igured VLANs, use the show cam agingtime comm and.
2-811 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show cam count show cam co unt T o display the number of CAM entries only , use the show cam count comm and.
2-812 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show ca m m oni tor show cam monito r T o display the global conf igur ation f or CAM monitor ing or the conf ig uration f or specif ic inter faces, use the show cam monitor comm and.
2-813 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show cam ms fc show cam msfc T o display the router ’ s MA C-VLAN entries, use the show cam msfc comman d.
2-814 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show ca m not ification show cam notification T o display the status of CAM table notificat ions, notification intervals, and MAC addresses added a nd deleted, use the show ca m noti fication co mman d.
2-815 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show cam notification This exam ple shows how to disp.
2-816 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show ca m not ification Relat e d Commands clear ca m c.
2-817 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show cd p show cdp T o di splay Cisc o D iscovery Pr otocol (C DP) in forma tion, use th e show cdp comm and.
2-818 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show cd p This example shows how to display detai led CDP neighbor informa tion. Th e display varies dependi ng on yo ur ne twork c onfigurati on at the ti me you r un the c omman d.
2-819 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show cd p Port Device-ID Port-ID NativeVLAN -------- .
2-820 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show ch anne l show chann el T o d ispl ay E t herCh ann el i nfo rmat ion fo r a ch an nel , u s e t he show channel comman d.
2-821 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show chan nel This exam ple shows how to di splay c h.
2-822 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show ch anne l Chan Port if- Oper-group Neighbor Chan O.
2-823 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show chan nel Port Rcv-Octet Xmit-Octet -------- ----.
2-824 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show ch anne l Console> show channel 769 info protco.
2-825 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show c hannel group show chann el group T o disp lay Et herC han nel gr oup sta tus in forma tion, use th e show channel group command.
2-826 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show ch anne l group This exam ple shows how to displ a.
2-827 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show c hannel group Admin Port ACL name Protocol grou.
2-828 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show ch anne l group 769 1/2 2q2t 1q4t untrusted 0 port.
2-829 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show channel h ash show chann el has h T o display the channe l port the traff ic goes to based on the current ch annel distrib ution mode, use the show channel hash command .
2-830 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show ch annel ha sh Exam ples This example sho ws how to display hash informatio n in a channel: Console> show channel hash 769 10.
2-831 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show channel m ac show chann el mac T o display MA C information in the chan nel, use the sho w channel mac comm and.
2-832 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show ch anne lprot oco l show chann elprotocol T o d i s pl a y the channeling pro tocol used by each module in the s ystem, us e t h e show channelpr otocol comm and.
2-833 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show cha nnelproto col Relat e d Commands set channel.
2-834 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show ch anne l traffi c show chann el traffic T o display c hannel p ort utilization based on MAC counters, use the show channel traffic command.
2-835 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show conf ig show config T o d isplay the nond efaul t sys tem or m odule con figura tion, u se the show config command.
2-836 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show co nfi g ! set editing disable ! #frame distribution method set port channel all distribution mac unknown ! #snmp set snmp trap 0.
2-837 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show conf ig #rcp set rcp username 1 ! #dns set ip dns server 171.68.10.70 primary set ip dns server 171.
2-838 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show co nfi g #module 4 empty ! #module 5 : 48-port 10/.
2-839 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show conf ig #system set system baud 9600 set system modem disable set system name set system location set system contact ! .
2-840 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show co nfi g This e xample sho ws how to display the A CL configur ation f ile location: Console> (enable) show config acl location ACL configuration is being saved in NVRAM.
2-841 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show config checkpoints show config checkpoin ts T o display conf iguration checkpoint f ile informatio n, use the show conf ig checkpoints comman d.
2-842 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show co nfi g di fference s show config differences T o.
2-843 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show config differences Relat e d Commands show conf .
2-844 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show co nfi g m od e show config mode T o disp lay t he syste m confi gurati on mo de curre ntly runn ing on t he swi tch, use the sho w config mode comm and.
2-845 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show co n fig q os a cl show config qos acl T o display the co mmitted ac cess lists in a c ommand l ine form at, use th e show conf ig qos acl comm and.
2-846 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show co ps show cops T o display COPS information, use the show cops comm and.
2-847 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s sh ow co ps COPS connection state : connected Last active server : 171.21.34.56 Primary configured server : 171.
2-848 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show co ps COPS RSVP client state ---------------------.
2-849 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show count ers show counte rs T o d isplay h ardwa re c oun ter s fo r a por t, al l p orts on a m odul e, or a su pe rviso r e ngin e, u se t he show counters com mand.
2-850 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show co unt ers 15 rxTxHCpkts1024to1518Octets = 0 16 rx.
2-851 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show count ers Ta b l e 2 - 3 1 describes the possible fields in th e show coun ter s comm and out put.
2-852 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show co unt ers 32-bit coun ters rxCRCA lignEr rors Nu .
2-853 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show count ers dot3StatsSingle ColFr am es A count of successful ly tra nsmitte d fra mes on a par tic ul ar inte rf ac e for which transmission is inhibited b y exac tly one col lision.
2-854 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show co unt ers Relat e d Commands clear co unters dot3.
2-855 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show crypto key show crypt o key T o display RSA key pa ir information, use the sho w crypto k ey command.
2-856 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show de fau lt show defaul t T o che c k the stat us of the d efault po rt s ta tus sett ing, u se the show default command.
2-857 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show dhcp -snooping b indings show dhcp-snoo ping bindi ngs T o display DHCP binding s learned fro m DHCP snooping , use the s how dhcp-snooping bindings comm an d.
2-858 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show dh cp-s noopi ng bi ndings Relat e d Commands clea.
2-859 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show dhcp-s nooping con fig show dhcp-snoo ping confi g T o di splay t he DHCP sno oping configu ratio n, use the show dhcp-snooping config comm and.
2-860 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show dh cp-s noopi ng s tatistic s show dhcp-snoo ping statistic s T o display DHCP snooping statistics, use the show dhcp-snooping statisti cs comm and.
2-861 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show dot1 q-all- tagged show dot1q-all-tagg ed T o display the status of the dot1q taggi ng featu re on the switch, use the show dot1q-all-tagged comm and.
Chapter 2 Catalyst 6500 Series Sw itch and ROM Monitor Comm ands show dot1 x 2-862 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 2 show dot1x T o display sy stem 80 2.1X c apabilities a nd info rmation re lated to 8 02.1X u sers, groups , VLANs, and VLAN g rou ps, use t h e show dot1x command.
2-863 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show dot1x radius-vlan-assignment enabled radius-keep.
2-864 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show do t1 x User mNo = 3 User pNo = 18 Username = user81 User IP = 81.
2-865 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show dot1x This e x ample sho ws how to disp lay info.
2-866 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show dv la n statis ti cs show dvlan statistics T o display dynamic VLAN statistic s, use the show dvlan statistics co mmand.
2-867 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show enviro nment show environme nt T o display en vironmental, te mperat ure, an d inline po wer status informa tion, use the show en vironment comm and.
2-868 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show en vironm ent Exam ples Th is exampl e sh ows how to displa y environmen tal st atus in forma ti on: Console> show environment Environmental Status (.
2-869 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show enviro nment This exa mple shows ho w to display.
2-870 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show en vironm ent This example shows ho w to display the in line power status for a spe cific module: Console> show environment power 9 Module 9: Default Inline Power allocation per port: 9.
2-871 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show enviro nment This e xample shows h ow to display co nnector rating informa tion: Console> show environment connector Chassis connector rating : 756.
2-872 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show en vironm ent Relat e d Commands set inlinepowe r show port inlinepo wer Slot power Require ment/U sage Power Requested Module power requested.
2-873 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show errdi sable-t im eout show errdisab le-timeo ut T o displ ay the configurat ion and stat us of the errd isable tim eout, use the show errd isable-timeout comm and.
2-874 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show err dis ab le-timeou t Relat e d Commands set errd.
2-875 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show er rordetect ion show errord etection T o display error detectio n settings, u se the show errord etec ti on command.
2-876 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show fabri c channe l show fabri c channel T o display Switch Fab ric Module inform ation, use the show fabric channel command.
2-877 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show f abric channel The CEF256/ CEF72 0 modules op e.
2-878 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show fabri c channe l This exam ple sh ows how to displ.
2-879 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show f abric channel 6 18 11, 11 n/a unused 6 18 12, .
2-880 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show fabri c channe l Relat e d Commands switch fabric Speed Speed of th e fa bric link (8 G bp s or 20 G b ps).
2-881 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show fabric errors show fabri c errors T o d isplay th e fabric err or coun ter s on o ne or al l mo dule s, use the show fabric errors comman d.
2-882 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show fabri c errors Relat e d Commands show fa bric cha.
2-883 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show fabri c status show fabri c status T o di splay the in tegrate d switc h fabric sta tus an d f orward ing speed , use the s how f abric status comm and.
2-884 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show file show file T o display the conte nts of a file that hav e b een sav ed to Flash memory , use the show f ile command .
2-885 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show fir ewall show firewall T o displa y the parame ters that ar e conf igured for a Fire wall Serv ices Modul e (FWSM), us e the show fi re w al l command.
2-886 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show flas h show flash T o list bootfl ash or Fl ash PC c ard in formatio n, inc luding file c ode nam es, version nu mber s, volume ID, status , and si z es , us e t he show flash command.
2-887 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show fla sh Console> show flash chips ******** Int.
2-888 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show flas h USAGE INFO: Bytes Used = 201D9B Bytes Avail.
2-889 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show ftp show ftp T o di spla y th e param eters con fi gured for File T ransfer Pro tocol (FTP ), u se the show ftp command .
2-890 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show ga rp ti m er show garp timer T o display all the valu es of the General At tribute Reg istration Pro tocol (GARP) tim ers, use the sho w garp timer comm and.
2-891 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show ga rp tim e r Relat e d Commands set garp timer .
2-892 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show gmr p configura tion show gmrp conf iguration T o display complete GMRP-rel ated configu ration informat ion, use th e show gmrp conf iguration comm an d.
2-893 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show gmr p statist ics show gmrp statistics T o display all the GMR P-relate d statistics for a specifie d VLAN, use the show gmrp statistics comm an d.
2-894 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show gmr p timer show gm rp timer T o display all the values of the GMRP timers, use the show gmrp timer co mman d.
2-895 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show gvr p co nfi gur a tio n show gvrp c onfigura ti.
2-896 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show gvrp co nfigu rat ion Disabled Fixed Normal 4/2 Disabled Fixed Active 4/7 Disbled Forbidden Normal 4/3 Disbled Forbidden Active 4/6 GVRP Participants running on no ports.
2-897 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show gvrp stat istics show gvrp statistics T o vie w GVRP statistics for a port, use the show gvrp sta tisti cs command.
2-898 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show gvrp s tatistic s Relat e d Commands clear g vrp s.
2-899 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show ifindex show ifindex T o display the informatio n of the specif ic if Index, use the show if index command.
2-900 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show igm p fl oo ding show igmp fl ooding T o d ispl ay w he the r t he IGM P f l oodin g f eat ure i s e nabl ed o r disab l ed, us e t he show i gmp fl ooding comm and.
2-901 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show igmp gd a_status show igmp g da_status T o displ.
2-902 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show igm p le ave-q uery -type show igmp le ave-query-type T o d ispl ay t he ty pe of q ue ry to b e sent whe n a po rt r ece ives a leave mess ag e, us e t he show igmp lea ve-query-type comman d.
2-903 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show ig mp m ode show igmp mode T o display the IGMP mode on the switch, use the show i gmp mode comman d.
2-904 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show igm p qu erier info rmatio n show igmp querier information T o disp lay queri er inf ormatio n specific to a c onfigured V LAN, us e the show igmp queri er inf ormation comm and.
2-905 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s sh ow ig mp st a t is ti c s show igmp statistics T o vie w IGMP statistics f or a partic ular VLAN, use the show igmp statistics comman d.
2-906 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show igm p s tatistics Relat e d Commands clear ig mp s.
2-907 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show imagemib show imagemib T o display i mage infor mation pr ov ided in th e CISCO-IM A GE -MIB for a particu lar imag e, us e the show imagemib command.
2-908 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show im age-ve rificat ion show image-verification T o displa y the status of the image ve rifica tion featur e, use the sh ow i mage- verif cation co mmand.
2-909 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show inlinepower show inlinep ower T o display status of inline power for all modules, use the show in l in e pow e r comman d.
2-910 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show inli nep ower Relat e d Commands set inlinepowe r set po rt i nl in epow er show port inlinepo wer Inline Po wer Admin T otal powe r that is allocated to the ports on the module.
2-911 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show interface show interface T o display information on ne twork interf aces, use the show interface command .
2-912 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show inte rfa ce Relat e d Commands set interface dest IP address of the host to which the console por t will be conn ected.
2-913 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show inventory show invento ry T o display the product in ventory listin g of al l Cisco product s that ar e installed in a netw o rking devi ce, use the show i nven t o r y command.
2-914 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show in ve ntory PID: WS-C6000-VTT , VID: , SN: SMT03461008 NAME: "2", DESCR: "1000BaseX Supervisor 2 port WS-X6K-SUP2-2GE Rev.
2-915 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show ip alias show ip alias T o s how a listi ng of de fined IP ali ases, use the show ip alias comm and.
Chapter 2 Catalyst 6500 Series Sw itch and ROM Monitor Comm ands show ip dn s 2-916 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 2 show ip dns T o s how the DNS name server s and the de fault D NS dom ain nam e, us e t he show ip dns command.
2-917 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show ip d ns Relat e d Commands clear ip dns domain c.
2-918 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show ip htt p show ip http T o vie w the HTTP conf iguration and the switch web interf ace information, use the show ip http comm and.
2-919 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show ip http This e xample sho ws the HTTP conf igura.
2-920 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show ip perm i t show ip permit T o display the IP permit list information , use the show ip pe rmit command.
2-921 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show ip permit Relat e d Commands clear ip permit set ip permit set snmp tr ap Last Accessed T ime Date and time of the last attempt to log in to the switch from the address.
Chapter 2 Catalyst 6500 Series Sw itch and ROM Monitor Comm ands show ip r oute 2-922 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 2s2 show ip route T o display IP routing table entries, use the show ip route command. show ip r oute [ noalias ] Syntax Descript ion Defaults Thi s command has no de fa ult set tings.
2-923 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show ip r out e Relat e d Commands clear ip r oute se.
2-924 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show ke rber os show ke rbero s T o display the K erberos confi g uration in formation, use the show kerberos com mand.
2-925 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show kerberos Relat e d Commands clear ke rberos clie.
2-926 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show l2pr otocol-t unnel sta ti st ic s show l2pro toco.
2-927 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show l2 protoco l-tunne l stati stics This exam ple s.
2-928 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show lacp- channel show lacp-cha nnel T o di splay inf or matio n abo ut the Li nk Aggr egation Contr ol Pr otoc ol ( LACP) channe l, use the show lacp-channel comman d.
2-929 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show l acp-chan nel Command Mode s Normal. Usage Guid el i nes If you do not speci fy the admi n-key v alue, infor mation about all LA CP channels is di splayed.
2-930 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show lacp- channel This example shows how to display L .
2-931 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show l acp-chan nel This example shows how to display the outgo ing port for th e specified source and destination IP addresses: Console> (enable) show lacp-channel hash 808 172.
2-932 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show lcper roracti on show lcperroract ion T o di splay.
2-933 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show lda show lda T o displa y the ASLB con figurati on inform ation , use the show ld a command .
2-934 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show lda Usage Guid el i nes This c omm and is suppor ted on ly o n sw itc he s configu red w ith th e Supe r visor En gine 1 wi th L aye r 3 Switching Engine WS-F6K-PFC (Pol icy Feature Card) .
2-935 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show lda LD Server Side: --------------- Server(s) an.
2-936 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show lda This exa mple shows ho w to display all ASLB M.
2-937 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show localuser show localu ser T o display the local user ac counts for a switch, use the show loca luser comma nd.
2-938 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show log show log T o display the error log for the system or a specif ic module, use the show log comm and.
2-939 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show log NVRAM log: 01.
2-940 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show log Relat e d Commands clear lo g.
2-941 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show log command show log comman d T o dis play the command log entries, u s e th e show log co mmand command.
2-942 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show loggi ng show loggin g T o display the system m essage log info rma tion, u se the show logging command .
2-943 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show l ogging qos 7 7 radius 7 7 rsvp 7 7 security 7 .
2-944 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show loggi ng buffer show loggin g buffer T o display sy stem m essages fro m the internal buf fer , use the show log ging buffer co mmand.
2-945 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show logging callhome show loggin g callhome T o display the conf igured CallHo me settings, use the sho w logging callhome command.
2-946 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show loggi ng callho me Relat e d Commands clear lo ggi.
2-947 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show logging callhome destination show loggin g callhome destination T o display the add resses set to re ceiv e CallHome sy slog message s, use the show logging callhome destination com mand.
2-948 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show lo ggi ng callho me de st ination Relat e d Comman.
2-949 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show logging c allhome from show loggin g callhome from T o display the From address in the CallHome syslog messages, use the show loggi ng cal lhome from comm and.
2-950 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show loggi ng callho me reply -t o show loggin g callhome repl y-to T o display th e Reply-to addre ss in the Cal lHome syslog messag es, use the show logging callhome reply-to command.
2-951 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show logging callhome severity show loggin g callhome.
2-952 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show lo ggi ng call ho me sm tp-ser ve r show loggin g .
2-953 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show ma c show mac T o display MA C counters, use the show mac comman d. show mac [ utilization ] [ mod [/ port ]] Syntax Descript ion Defaults Thi s command has no de fa ult set tings.
2-954 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show mac MAC SMT-Address Curr-Path TReq TNeg TMax TVX -.
2-955 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show ma c In-Dis ca rd Incoming frame s that w ere disc arde d b eca use t he f rame d id n ot n ee d t o b e switc hed.
2-956 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show mi croc ode show microcode T o display the version of the microcode and the modu le version infor mation, use the show m icroco de comm and.
2-957 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show mls show mls T o display MLS Layer 3 pack et informa tion in t he MLS-based Catalyst 6500 series swi tches, use th e show mls com mand.
2-958 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show ml s MSFC ID Module XTAG MAC Vlans --------------- ------ ---- ----------------- -------------------- 52.
2-959 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show mls acl-route show mls acl-route T o display summari es from A CL for r outing in the M LS-based Catalyst 6500 series sw itches, use the show mls acl-r oute command.
2-960 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show ml s cef ex act -route show mls cef exact -route T.
2-961 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show mls cef interface show mls cef interface T o display MSFC VLAN information, use the sh ow mls cef i nterf ace command.
2-962 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show ml s c e f in te rfa ce This e x ample sho w how to disp lay info rmation fo r a specif ic CEF VLAN: Console> (enable) show mls cef interface 46 Module 16: vlan 46, IP Address 46.
2-963 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show m l s ce f ma c show mls cef mac T o displ ay bo.
2-964 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show mls cef maximum-routes show mls cef maximum-routes T o dis play t he maxim um num ber of rou tes that are c onfigured fo r eac h MLS pr otocol, use the show mls ce f ma ximum- ro ute s command .
2-965 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show mls cef rpf show mls cef rpf T o disp lay reverse path f orwarding (RPF) mo de info rmati on, stat istics, and VLA N tabl e conte nt, use the show mls cef rpf command.
2-966 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show ml s cef rpf Relat e d Commands clear mls cef rp f.
2-967 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show mls cef summary show mls cef summary T o display a summary of CEF table information , use the show mls cef summary comman d.
2-968 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show mls cef summary Relat e d Commands clear mls cef sho w mls cef interfa ce show mls cef mac sho w mls entry cef IPX r out e e ntri es N umbe r of IP X ro ut e en t ries.
2-969 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show mls entry show mls entry T o display state informatio n in the M LS-based Catalyst 6500 series switch es, use th e show mls entry comm and.
2-970 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show ml s entry Usage Guid el i nes On swit che s confi.
2-971 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show mls entry The show mls entry com mand disp lays bridge d flows on a Supervisor En gine 1 when bridg ed flow statistics is enabled.
2-972 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show ml s entry For destinati on-only flow: Console>.
2-973 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show mls entry 401.
2-974 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show ml s entry 0.0.0.2 0.0.0.2 2 201 101 cc-cc-cc-cc-cc-cc 2 ARPA 0 0 01:03:21 01:00:51 cccccccc cccccccc 0.
2-975 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show mls entr y cef show mls entry cef T o display CEF and adjacenc y entries (and Tx statistics) for IP resolved entries an d IPX resolved or connect ed entries, us e the show mls entry cef comm and.
2-976 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show ml s entry cef Exam ples This example sho ws how t.
2-977 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show mls entr y cef This exam ple sh ows how to displa y adj ace ncy infor mat ion: Console> (enable) show mls entry cef ip adjacency Mod: 16 Destination-IP: 127.
2-978 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show ml s entry cef Relat e d Commands clear mls cef cl.
2-979 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show mls e ntry netflow-route show mls entry netflow-route T o display shortcut informatio n in the MLS-based Catalyst 6500 series switches, use the show mls entry netflow-r oute comman d.
2-980 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show ml s entry net flow-ro ut e Ente rin g th e destin.
2-981 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show mls exclud e protocol show mls exclude protocol T o displa y excluded pr otocols on T CP or UDP f rom being sho rtcuts, u se the show mls exclud e prot ocol comm and.
2-982 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show mls mu lticast show mls multicast T o display IP multicast MLS inform ation, use the show mls multicast comm and.
2-983 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show mls multicast If you disab le DNS, no name c an be specified or shown.
2-984 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show mls mu lticast This e xample shows h ow to display.
2-985 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show mls multicast This example shows ho w to display.
2-986 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show ml s nde show mls nde T o display NetFlo w Data Export information, u se the show mls nde comm and. show ml s nde Syntax D escr i pti on This c omm and has n o a rgument s.
2-987 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show mls netflow-route show mls netflow-route T o display summar ies from NetFlo w for routing in the MLS-based Catalyst 6500 series switch es, use the show mls netflow -route command .
2-988 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show mls pb r-route show mls pbr-route T o display statistics about polic y-based routing (PBR) traff ic, use the show mls pbr - route command.
2-989 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show mls stati stics show mls statistics T o display MLS statistics info rmation in the MLS-based Cata lyst 6500 seri es switches, use the show mls statistics command.
2-990 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show ml s statis t ics Usage Guid el i nes If your syst.
2-991 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show mls stati stics Ente r th e show mls stat istics entry ip t op-talkers command to ide ntify the NetFlo ws with the maxim um network usa ge (ca lle d “top ta lkers”).
2-992 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show ml s statis t ics Note Th e foll owing command s are ou tput fr om switc hes configu red wit h the Sup ervisor Engin e 1 with Lay er 3 Switchi ng Eng in e WS-F6 K-PFC.
2-993 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show mls stati stics Relat e d Commands clear mls sta.
2-994 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show ml s verify show mls verify T o disp lay th e Layer 3 er ror chec king conf igu ratio n, use the show mls ve rify comman d.
2-995 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show mo dule show module T o disp lay modu l e status a nd i n forma t ion, use the show module co mma nd.
2-996 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show mod ule Mod MAC-Address(es) Hw Fw Sw --- -------------------------------------- ------ ---------- -------------- 1 00-30-80-f7-a5-06 to 00-30-80-f7-a5-07 1.
2-997 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show mo dule This exam ple sh ows the dis play f or a.
2-998 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show mod ule init show moduleinit T o d ispl ay c onte nts of the i nform ation stor e d in the sy stem m odule i n itiatio n lo g, use the show moduleinit co mmand.
2-999 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show moduleinit This exam ple sh ows how to displa y .
2-1000 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show ms fca utostat e show msfcautosta te T o display the Multilayer Switc h Feature Card (MSFC) auto port state, use the show msfcautosta te comm and.
2-1001 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show msmaut ostate show msmautosta te T o display t .
2-1002 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show mult icast gr oup show multi cast group T o display the multicast group conf iguration , use the show multicast group comm and.
2-1003 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show multicast group Relat e d Commands clear multi c ast rout er set multicast router show multicast r outer CoS CoS v alu e.
2-1004 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show mul ti ca st grou p cou nt show multi cast group coun t T o show the total count of multicast addresses (g roups) in a VLAN, use th e s how multicast group c ount comm and.
2-1005 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show multicast protocols status show multicast protocols status T o display the status of Layer 2 multicast pro tocol s on the switch, use the sho w multic ast pr otocol s status comma nd.
2-1006 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show mult icast ra telimit- info show multicast ratelimit-info T o display information ab out multicast rate limiting, use the show multica st ratelimi t-inf o comman d.
2-1007 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show mu lticast rou ter show multicast router T o displa y the port s that have IGMP or RGMP -cap able rou ters assigne d to them, use the show multicast rou t er command.
2-1008 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show mul ti ca st router Ta b l e 2 - 6 0 descr ibes the f iel ds in the show multicast r outer command output .
2-1009 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show multicast v3-group show multicast v3-group T o di splay IGM P version 3 in for mati on ba sed on grou p I P a ddre ss, use t he show mu lti cast v3 -gro up comm and.
2-1010 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show ne ts tat show netstat T o display the current ly activ e network connections an d to list statistics for the v arious protocols in the TCP/IP , use the show netstat comm and.
2-1011 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show net stat 69 duplicate acks 0 acks for unsent data 3468 packets (15367 bytes) received in-sequence 12 completely duplicate packets (20 bytes) 0 packets with some dup.
2-1012 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show ne ts tat This exam ple sh ows how to displ ay U .
2-1013 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show net stat Ta b l e 2 - 6 2 descri bes the f iel ds in the show netstat udp command o u tpu t.
2-1014 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show ne ts tat This example shows how to displa y ICMP.
2-1015 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show net stat This exam ple sh ows how to displa y the IP r out ing ta ble: Console> show netstat routes DESTINATION GATEWAY FLAGS USE INTERFACE default 172.
2-1016 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show ne ts tat Ta b l e 2 - 6 6 descr ibes the f iel ds in the show ne tstat in terfac e command out put.
2-1017 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show ntp show ntp T o displa y the curren t NTP status, us e the show ntp command . show ntp Syntax Descript ion This c omm and ha s no a rgume nts o r keywords.
2-1018 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show ntp Relat e d Commands clear ntp ser ver set ntp .
2-1019 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show pbf show pbf T o display PBF-related information , use the show pbf comman d.
2-1020 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show pb f This exam ple sh ows how to displ ay a dja c.
2-1021 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show pbf Relat e d Commands clear pbf set pbf.
2-1022 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show pb f arp-insp ectio n show pbf arp-in spection T o ve rify that an ARP-inspection A CE is set on the A CL for a clie nt list or a gate way , use the show pbf arp-inspection comman d.
2-1023 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show pbf cli ent show pbf client T o display the PBF.
2-1024 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show pb f gw show pbf gw T o display the PBF gate way confi guration, use the show pbf gw command.
2-1025 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show pbf-map show pbf-map T o display PBF map information, use the show pbf- map co mmand . show pbf-map { vla n | config } Syntax Descript ion Defaults Thi s command has no de fa ult set tings.
2-1026 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show pb f-ma p Relat e d Commands clear pbf cli ent cl.
2-1027 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show pol l show poll T o display system polling information, use the show poll comma nd. show poll Syntax Descript ion This c omm and ha s no a rgume nts o r keywords.
Chapter 2 Catalyst 6500 Series Sw itch and ROM Monitor Comm ands show por t 2-1028 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 22 show port T o disp lay po rt st atus informa tion, use the show port comman d. show port [ mod [ /port ]] Syntax Descript ion Defaults Thi s command has no de fa ult set tings.
2-1029 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show port Exam ples Th is example shows how to displ.
2-1030 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show po rt Port Security Violation Shutdown-Time Age-T.
2-1031 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show port 7/8 enable 00-10-7b-00-0a-5f (Port host pr.
2-1032 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show po rt 3/8 onhook 1 full 64k FXS 3/9 onhook 1 full.
2-1033 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show port Ta b l e 2 - 6 8 describe s the possib le fields (de pending on the p ort type q ueried ) in the show port co mman d output.
2-1034 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show po rt Unde rSize Number of received frames l ess than 64 oc tets long (but are othe rwise wel l-form ed).
2-1035 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show port Relat e d Commands set port disable set port enable show port status Lem-Re j-Ct Number o f times a conn ection was reject ed bec ause of ex cessi ve LEM errors .
2-1036 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show po rt arp-insp ection show port a rp-inspection T.
2-1037 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show port a uto-mdi x show po rt au to-mdix T o displ ay th e status of the au to mat ic Me dia -De pende nt Int erfac e C rossover (MDIX) fea ture on a port , use the show port auto-mdix comman d.
2-1038 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show po rt au xiliaryvl an show port auxiliaryvlan T o display the port auxiliary VLAN status for a sp ecif ic port, use the sho w port aux ili aryv lan comm and.
2-1039 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show port au xiliaryv lan This exam ple sh ows how t.
2-1040 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show po rt br oadcas t show port b roadcast T o display broadcast information, use the show port br oadcast comma nd .
2-1041 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show port br oad ca st Relat e d Commands set port broadcast T otal-Drop Number of broad cast, multic ast, and u nicast pa ckets d ropped because the port bro adcast l imit was e xceeded.
2-1042 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show po rt ca pabilitie s show port c apabilities T o display the capabilit ies on the ports, use the show port capabilit ies comm and.
2-1043 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show port capabilities Trunk encap type 802.
2-1044 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show po rt ca pabilitie s This e xample sho ws the por.
2-1045 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show port capabilities Ta b l e 2 - 7 1 describ es the possibl e fields (dep ending on th e type of port queried ) and the values in th e show port capabilities c omman d outp ut.
2-1046 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show po rt ca pabilitie s Relat e d Commands set port .
2-1047 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s sho w po r t cd p show po rt cd p T o display the port CDP enable state and the message interv al, use the show port cdp comman d.
2-1048 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show po rt cd p Relat e d Commands set cdp show cdp.
2-1049 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show port c hannel show port c hannel T o disp lay Et herC han nel inf ormat ion, use the show port channel comm and.
2-1050 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show po rt ch annel Exam ples Th is exampl e sh ows ho.
2-1051 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show port c hannel Port Port Portfast Port Port prio.
2-1052 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show po rt ch annel 3/3 enabled normal disabled 3/4 en.
2-1053 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show port c hannel Speed Spee d s etti ng for the por t (a uto, 10, 10 0, 1000) . Dupl ex Duplex setti ng for the por t (auto, ful l, half).
2-1054 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show po rt ch annel Relat e d Commands set port channel show channel sho w chann el gro up GVRP regist ration Stat us of the ad ministra tive control of an outbo und port (nor mal, fixed, forbidden).
2-1055 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show port cops show port c ops T o display COPS informat ion on all or individual port s, use the s how port cops command .
2-1056 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show po rt co ps This example shows how to display COP.
2-1057 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show por t count ers show port c ount ers T o sho w all the counters fo r a port, u se the show port count ers command .
2-1058 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show po rt co unters Ta b l e 2 - 7 5 describ es the possib le fields (de pending on the port t ype que ried) in th e show port count ers comm an d o utpu t.
2-1059 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show port de bou nc e show port d ebounce T o displa y whether the port debo unce timer s are enabled or disable d , use the show port debounc e comm and.
2-1060 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show po rt dh cp-sno oping show port d hcp-snooping T o d isplay t he port specific DHC P snoopi ng co nfiguration , use the show port dhcp-snooping comm and.
2-1061 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show port dhcp -snoopi ng Console> (enable) This .
2-1062 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show po rt do t1q-all-ta gged show port d ot1q-all-tagged T o sho w the status of the dot1q-a ll-tagged featur e on all or specif ic ports, use the show port dot1q-all-tagged com mand.
2-1063 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show port do t1q-eth ertype show port d ot1q-ethertyp e T o s how the stat us of t he 8 02. 1q Eth er type field on a ll or spec ific port s, us e t he show port dot1q-ethertype comm and.
2-1064 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show po rt do t1qtunn el show port d ot1qtunnel T o d isplay the dot1q tun nel mo de sta tus, use the show port dot1qtunnel command.
2-1065 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show po rt dot1 x show po rt dot1x T o displa y all .
2-1066 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show po rt do t1x Exam ples This example sho ws ho w t.
2-1067 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show por t errdi sable-t imeout show port e rrdisabl.
2-1068 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show po rt er rdisable -timeout This e xample sho ws t.
2-1069 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show por t errorde tection show port e rrordetect ion T o display informat ion about port error detec tion, use the sh ow port err ordetection command.
2-1070 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show po rt f low c ontrol show port fl owcontrol T o display per-por t status inf ormation and statistics rela ted to fl ow control, use the show port flowcont rol command.
2-1071 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show por t flowcontr ol Ta b l e 2 - 7 6 descri bes the f iel ds in the s how p or t f low c on tr ol command outp ut.
2-1072 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show po rt i nli ne power show port in linepower T o display the port power admini strati on and opera tional status, use the show p o rt i nl i nep ower comm and.
2-1073 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show port inl ine p owe r This exam ple shows how to.
2-1074 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show po rt i nli ne power Relat e d Commands set inlinepowe r set po rt i nl in epow er show environment Port Modul e nu mb er and por t nu mb er .
2-1075 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s sh ow po rt jumb o show port jumbo T o display th e jumbo fram e setting s for all port s with the feat ure enab led, use the show port jumbo comm an d.
2-1076 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show po rt l 2pr otocol-t unn el show port l2 pro tocol-tun nel T o d isplay L ayer 2 pr ot ocol tu nnel ing info rma tion on a po rt o r ra nge o f por ts, u se the show por t l2protocol-tunnel command .
2-1077 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show port lacp-c hannel show port la cp-channel T o display informat io n about LA CP channels b y port or module number , use the show port lacp-channel comman d.
2-1078 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show po rt l acp -channe l This exam ple sh ows how to.
2-1079 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show port lacp-c hannel This exam ple shows how to d.
2-1080 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show po rt mac show port mac T o displa y port MA C coun ter inf ormat ion, u se the show port mac command.
2-1081 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show p ort mac Ta b l e 2 - 7 8 describes the possible fields in th e show p ort ma c comman d outpu t.
2-1082 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show po rt mac -addres s show port mac-add ress T o displa y the MA C address as sociat ed with a ph ysical por t or ports, use the show port mac-address comm and.
2-1083 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s sh ow po rt mac -ad d re ss Port Mac address ----- ---------------------- 5/1 00-d0-d3-33-80-9c 5/2 00-d0-d3-33-80-9d .
2-1084 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show po rt ne gotiati on show port n egotiation T o di splay the link n egotiat ion pro toco l se ttin g f or t he sp ec ified por t, use t he show port negot iati on comm and.
2-1085 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show port p rbs show po rt pr bs T o di splay the po.
2-1086 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show po rt pr otocol show port p rotocol T o v iew proto co l filters co nfigured on the E the rChan ne l por ts , use the show port protocol comma nd.
2-1087 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show port qo s show po rt qo s T o display QoS-related inform ation, use the show port qos comman d.
2-1088 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show po rt qo s Runtime: Port ACL name Type ----- -------------------------------- ---- No ACL is mapped to port 2/1.
2-1089 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show port qo s Config: Port ACL name Type ----- -------------------------------- ---- No ACL is mapped to port 4/1.
2-1090 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show po rt rsvp show port rsvp T o di splay RSVP i nforma ti on on a per- por t basi s, use the show port rsvp co mmand .
2-1091 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show po r t se cur ity show port se curity T o vie w port security conf iguration informatio n and statistics, us e the show po rt se curity co mmand.
2-1092 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show po rt s ecu rity Port Secure-Src-Addrs Age-Left L.
2-1093 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show po r t se cur ity This e xample shows ho w to d.
2-1094 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show po rt s ecu rity-acl show port se curity-acl T o displa y the port acce s s control list (P A CL) mode and th e status of a P A CL mer ge oper ation, use the sho w port security- acl command .
2-1095 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show po rt secur ity-acl dhcp-snooping: Port Trust S.
2-1096 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show po rt s pan tree show port sp antree T o v iew port spa nnin g t ree in for ma tio n, use the show port spantree command.
2-1097 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show port sta tus show port st atus T o disp lay po rt st atus informa tion, use the show port status co mmand .
2-1098 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show po rt sync-re start-de lay show port sync-restart-delay T o display a port’ s synchronization restar t delay , use the show port sync -res tart-de lay command .
2-1099 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show po r t tdr show port tdr T o display the results of the T ime Domain Reflectometer (TDR) test on a port , use the show port td r comm and.
2-1100 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show po rt t dr Port Speed Local pair Pair length Remo.
2-1101 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show po rt trap show port trap T o disp lay po rt tra p status, use the show port trap comman d. show port trap [ mod [ /port ]] Syntax Descript ion Defaults Thi s command has no de fa ult set tings.
2-1102 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show po rt t runk show port trunk T o display port trunk info rmation, use the sho w port trunk co mm an d.
2-1103 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show p ort trun k Ta b l e 2 - 8 1 descri bes the f iel ds in the show port trunk comma nd output .
2-1104 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show po rt un icast-f lood show port unicast-flood T o d isplay the run -time c onfigura tion o f the po rt us ing unic ast floo d b lock ing, us e the show port unicast-flood comm and.
2-1105 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show port vlan- mapping show port vl an-mapping T o d isplay the curre nt VL AN mapp ing co nfigurat ion on a sp ec ified por t, u se the show port vlan-mapping comm and.
2-1106 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show po rt v oic e show port voice T o display vo ice port informat ion, use the show po rt voi ce co mmand .
2-1107 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show po rt voice Port DNS-Server(s) Domain -------- ----------------- ------------------------------------------------- 7/1 dns-sj3.
2-1108 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show po rt v oic e 7/5 10.
2-1109 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show por t voice act ive show port vo ice active T o displa y acti ve call inform ation on a port, use the show port voice active co mman d.
2-1110 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show po rt voice ac tive Exam ples T h is ex am p l e .
2-1111 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show por t voice act ive Fax Transmit Duration : 332.
2-1112 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show po rt voice ac tive Low water playout delay : 234.
2-1113 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show po rt v o ice f dl show port vo ice fdl T o display the facilitie s data link (FDL) s ta ti st ics for the specified ports, use the show port voice fd l comm and.
2-1114 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show po rt v oic e fdl Ta b l e 2 - 8 3 descri bes the pos sible fields (dep endi ng on the po rt type querie d) in the s how p ort vo ic e fd l comm an d o utpu t.
2-1115 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show po rt v o ice i nter fac e show port vo ice interf ace T o d i s p l a y t h e port vo ice interface configuration, us e t h e show port v oice interf ace comm and.
2-1116 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show po rt v tp show port vtp T o display the status of VLA N T runk Pro tocol (VT P) on a per-port basis, use the show port vtp comm and.
2-1117 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show port vtp 3/16 enabled 3/17 enabled 3/18 enabled.
2-1118 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show pro c show proc T o display CPU, memory allocatio n, and process utilizatio n information, use the show proc command.
2-1119 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show proc Memory Pool Utilization Memory Pool Type 1.
2-1120 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show pro c 44 -2 16 0 16 Backend_Rx 45 -2 16 0 16 Back.
2-1121 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show proc 5Min A verage me mory poo l usage o ver the last 5-minute int erva l. 10Mi n A vera ge m em ory pool usage over the la st 10 -min ute i nterval.
2-1122 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show pro to colfilter show proto colfilter T o list whether protoco l filte ring is enable d or disabled, use the show protocolf ilter command.
2-1123 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show pvlan show pvlan T o s how th e co nfigur at ion fo r a given private VLA N, u se t he show pvlan command.
2-1124 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show pvla n This e x ample sho ws how to display the s.
2-1125 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show pvlan capability show pvlan capability T o d eterm i ne w he the r or not a por t c an be ma de a p riv ate port, u se the show pvlan capability comm and.
2-1126 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show pvla n capabi li ty Console> (enable) show pvlan capability 5/3 Ports 5/1 - 5/12 are in the same ASIC range as port 5/3.
2-1127 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show pvlan mapp ing show pvlan mappi ng T o s how the priv ate VLA N m a pping s c onfigure d on pro mi scuous po rt s, use th e show pvlan mapping comm an d.
2-1128 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show pvla n mappin g Relat e d Commands clear co nfi g.
2-1129 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show qos acl editbuff er show qos acl editbuffer T o display A CL names in the edit buf fer , use the show qos acl editbuffer command.
2-1130 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show qo s acl info show qos acl in fo T o display QoS A C L information, use the show qos acl info comman d.
2-1131 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show qos acl info 2. set qos acl ip my_ip_acl trustdscp microflow my-micro aggregate agg tcp 173.22.3.4 255.
2-1132 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show qo s acl map show qos acl map T o display the ACL mapping inform ation, use the show qos acl map command.
2-1133 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show qos acl map This exam ple shows how to di spla .
2-1134 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show qo s acl resou rce-us age show qos acl resou rce-us age T o disp lay ACL mana gement in forma tion, use t he show qos acl resour ce-usage comman d.
2-1135 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show qo s bridged-m icrofl ow-polic ing show qos bridged -microflow-p olicing T o displa y the VLAN-b ridged packe t-polic ing status , use the sho w qos bridged-pack et-policing comm and.
2-1136 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show qo s info show qos info T o display QoS-related inf ormation for a specif ied port, use the sho w qos i nf o comman d.
2-1137 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show qos info The num ber pr eceding the p lette r in the port_type value (for ex ample , 1p2q2t an d 1p1q4t ) determines the threshold in the prio rity queue.
2-1138 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show qo s info This exam ple sh ows how to displ ay a .
2-1139 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show qos info This exam ple sh ows anothe r di splay.
2-1140 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show qo s info This exam ple shows how to di splay t h.
2-1141 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show qos info This exam ple shows anothe r di sp lay.
2-1142 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show qo s mac-cos show qos mac-cos T o display the cu rrently con figur ed QoS-related information fo r the MA C address and VLAN pa ir , use the show qos mac-cos command .
2-1143 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show qos mac-cos Relat e d Commands clea r q o s m a.
2-1144 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show qo s maps show qos maps T o d isplay the mappi ng o f d ifferent ma ps, use the show qos maps command.
2-1145 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s sh ow qo s map s Exam ples Th is exampl e sh ows how to displa y the co s-dscp- map ma p: Console> show qos maps cos-dscp-map CoS - DSCP map: CoS DSCP --- --------------- 0 10 .
2-1146 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show qo s maps DSCP - CoS map: DSCP CoS --------------- ---- 34-40,60 0 .
2-1147 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s sh ow qo s map s 9 9 10 10 11 11 12 12 13 13 14 14 1.
2-1148 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show qo s maps This exam ple sh ows how to displa y th.
2-1149 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show qos poli cer show qos poli cer T o displ ay micr oflow or a ggreg ate pol icers cu rrentl y conf igured, use the show qos policer comm and.
2-1150 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show qo s policer This exam ple sh ows how to displa y.
2-1151 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show qos poli cy-sour ce show qos policy-source T o d isplay the QoS po licy sour ce i nfor ma tion, use th e show qos policy-source comman d.
2-1152 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show qo s rsvp show qos rsvp T o display RSVP information, use the show qos r svp command. show qos rsvp { info | flo w-inf o } Syntax D escr i pti on Defaults Thi s command has no de fa ult set tings.
2-1153 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show qos stati stics show qos statistics T o displa y the v arious QoS-r elated counter s fo r a specif ied port, us e the sho w qos st ati sti cs comman d.
2-1154 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show qo s statist ics This e xample shows ho w to display the QoS Layer 3 statistics: Console> show qos statistics l3stats Warning: QoS is disabled.
2-1155 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show qos statistics exp ort info show qos statistics export info T o displa y QoS data export configurati on and stati stical informat ion, use t he show qos st atistics export inf o comman d.
2-1156 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show qo s status show qos status T o d i s p l ay if QoS is enabled on the switch, u s e t he show qo s status comm and.
2-1157 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show radius show radius T o disp lay co nf igured RAD IUS par ameter s, use the show r adius command . show radi us [ noalias ] Syntax Descript ion Defaults Thi s command has no de fa ult set tings.
2-1158 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show rate-l im it show rate-limit T o display rate-limiter settings and information , use the show rate-limit co mmand.
2-1159 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show rate-limit FIB RECEIVE Off * * FIB GLEAN Off * .
2-1160 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show rcp show rcp T o display rcp informatio n, use the sho w r cp command . show r cp Syntax D escr i pti on This c omm and has n o keywords or a rgument s.
2-1161 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show reset show reset T o display scheduled reset informatio n, use the show reset command. show r eset Syntax Descript ion This c omm and ha s no keywords or argume nts.
2-1162 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show rgm p group show rgmp group T o display all mult icast groups or the c ount of m ulticast gr oups that are jo ined b y RGMP-cap able router s, use the show rgmp group command .
2-1163 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show r gmp statisti cs show rgmp statistics T o displa y all the RGMP-rel ated statis tics for a gi ven VLAN, use the show r gmp statistics command.
2-1164 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show rspan show rspan T o display the remote SP AN configuratio n, use the show rspan command. show rspan Syntax D escr i pti on This c omm and has n o keywords or a rgument s.
2-1165 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s s ho w r s pan Destination : Port 6/1 Rspan Vlan : 9.
2-1166 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show run ni ng-conf ig show running-con fig T o display the conf iguratio n information currently running on the switch or the conf iguration for a specif ic A CL, use the show running-conf ig co mman d.
2-1167 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show ru nning-con fig # ***** NON-DEFAULT CONFIGURATION ***** ! ! #time: Mon Jun 11 2001, 08:22:17 ! #version 6.
2-1168 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show run ni ng-conf ig set vlan 11 3/2 ! #module 4 emp.
2-1169 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show secu rity acl show security acl T o displa y the conte nts of the VACL that are c urrently c onfigured or last c ommitted t o NVRAM and hardwa re, use th e show security acl comman d.
2-1170 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show s ecur ity ac l Exam ples Th is example shows ho .
2-1171 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show secu rity acl 1. 1 00-20-20-20-20-22 set security acl adjacency b_4 --------------------------------------------------- 1.
2-1172 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show s ecur ity ac l Relat e d Commands clea r securit.
2-1173 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show security acl arp-inspection show security acl a rp-inspection T o di splay A dd ress R esolu tion Pr otoc ol (ARP) i nspec tion i nfor mat ion, use the show security acl arp-inspection comman d.
2-1174 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show s ecur ity acl ca pture-p ort s show security acl c apture-ports T o display the c apture po rt list, use th e show secur ity acl captur e-ports com mand.
2-1175 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show security ac l cram show security acl c ram T o display information ab out CRAM, use the show security acl cram command.
2-1176 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show s ecur ity acl f eature rate limit show security .
2-1177 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show security acl log show security acl lo g T o d isplay V A CL log i nfor ma tion, use th e show security acl log command.
2-1178 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show s ecur ity ac l l og Defaults Thi s command has no de fa ult set tings. Comma nd T ypes Swit ch co mman d.
2-1179 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show security acl log Exam ples Th is example sh ows.
2-1180 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show s ecur ity ac l map show security acl map T o display ACL-to -VLAN or ACL- to-port mappin g for a specific ACL , port, or VLAN, us e the show security acl map comma nd.
2-1181 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show security acl map This exam ple shows how to dis.
2-1182 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show s ecur ity ac l re source -usage show security acl resou rce-us age T o disp lay VACL ma nage ment infor mati on, us e the sho w securit y acl res ourc e-usage co mmand .
2-1183 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show security acl tcam interface show security acl tc am interface T o display the TCAM details fo r a specified V LAN, use the sho w security acl tcam int erface comm and.
2-1184 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show snm p show snmp T o display SNMP informat ion, use the show snmp comma nd. show snmp [ no alias ] Syntax D escr i pti on Defaults Thi s command has no de fa ult set tings.
2-1185 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show snmp Chassis Alias:my chassis Traps Enabled: No.
Chapter 2 Catalyst 6500 Series Sw itch and ROM Monitor Comm ands show snmp acce ss 2-1186 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 22 show snmp a ccess T o displa y SNMP access inf ormati on, use the show snmp access comman d.
2-1187 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show snmp access • V ers ion 3 ( SNMPv 3)—T his i s the most recen t v ersi on of SNMP and i s ful ly de scri bed i n RFC 257 1, RFC 2572, RFC 2573, RFC 2574, and RFC 2575.
2-1188 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show s n m p ac cess- list show snmp access-list T o disp lay SNMP a ccess li st numbe rs and co rresp onding I P addre sses and I P masks , use the show snmp access-list command.
2-1189 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show snmp buffer show snmp buffer T o displa y the num ber of SNM P pa ckets that can be saved in the SNM P UD P soc ket receive buf fe r , use the show snmp buffer command.
2-1190 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show snmp community show snmp community T o display SNMP conte xt information, use the show snmp community comm and.
2-1191 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show snmp community This exam ple sh ows the d ispl .
2-1192 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show snm p co ntext show snmp c ontext T o display SNMP conte xt information, use the show snmp context co mmand.
2-1193 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show s n mp coun ters show snmp c ounters T o display SNMP counter info rmation, use the sho w snmp counters comman d.
2-1194 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show snm p co unters snmpInASNParseErrs = 0 snmpInTooB.
2-1195 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show s n mp coun ters snmpInT otalReqV ars Number of MIB objects r etrie ved successfully b y the SNMP prot ocol entit y as the result of recei ving va lid SN MP Get-Reque st and Get- Next PDUs.
2-1196 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show snm p co unters snmpInT raps Num ber of SNMP T rap PDUs accept ed and proc essed b y the SNMP protoc ol entity .
2-1197 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show sn mp engineid show snmp e ngineid T o display the SNMP local engine ID, use the show snmp engineid comman d.
2-1198 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show snm p gr oup show snmp group T o di splay the nam e of t he SNMP gro up or col lect ion o f users who have a common a cce ss pol icy , use the show snmp g roup command .
2-1199 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show snm p gr oup The SNMP func tionality o n the Cata lyst enterp rise LAN switc hes for SNMP v 1 and SNMP v 2c remain s intact; ho we ver , the functionality has greatly ex panded for SNMPv3.
2-1200 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show snm p i falias show snmp ifalias T o display SNMP interfa ce aliases, use the show snmp ifalias comman d.
2-1201 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show snmp inform show snmp inform T o d isplay inf or ma tion a bo ut t he SNM P ver sion 3 in for m reque st f ea tur e, us e th e show snmp inf o rm comm and.
2-1202 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show snm p no tify show snmp notify T o display the snmpNotify T able conf iguration, use the sh ow snmp notify command .
2-1203 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show snmp notify Ta b l e 2 - 9 1 descri bes the f iel ds in the show snmp notify comm and outpu t.
2-1204 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show snmp rmonmemory show snmp rmonmemory T o display the memory usag e limit in percenta ge, use the show snmp rmonmemory comma nd.
2-1205 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show snmp target addr show snmp ta rgetadd r T o display the SNMP tar get address entries in the snmpT argetAddr essT able, use the show snmp targetaddr co mmand .
2-1206 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show snm p t argeta ddr Ta b l e 2 - 9 2 descr ibes the f iel ds in the show snmp targetaddr command ou t put.
2-1207 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show sn mp target para ms show snmp ta rgetparams T .
2-1208 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show snmp targetparams Ta b l e 2 - 9 3 descr ibes the f iel ds in the show snmp targetparams command outpu t.
2-1209 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show s n mp user show snmp user T o displa y SNMP infor mation for a specif ic user , use the show snmp user co mmand .
2-1210 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show snm p us er Ta b l e 2 - 9 4 descr ibes the f iel ds in the show snmp user command out put.
2-1211 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show snmp view show snmp view T o disp lay th e SNMP MIB vie w conf igurat ion, u se the show snmp view comm and.
2-1212 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show sn mp vie w Ta b l e 2 - 9 5 descr ibes the f iel ds in the show snmp view command ou tput.
2-1213 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show span show span T o display informat ion about the curren t SP AN conf iguration, use th e show span comm and.
2-1214 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show span Relat e d Commands clear co nfi g set spantree root Multicast Statu s of whet her monito ring multica st traf fic is enabled o r disabled.
2-1215 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show spantr ee show spantree T o displ ay span ning tree i nform ation fo r a VLAN or p ort, use t he show spantree comm and.
2-1216 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show spant ree Designated Root 00-60-70-4c-70-00 Desig.
2-1217 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show spantr ee This exam ple (wh ile i n Rapid PV ST.
2-1218 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show spant ree Relat e d Commands show spantr ee backb.
2-1219 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show spant ree backb onefast show spantree ba ckbonefa st T o disp lay whether th e sp anning tree B ackbo neF ast Co n ver gence featur e is enabl ed, use the show spantree backbonefast com mand.
2-1220 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show spant ree blo cke dports show spantree bl ockedports T o di splay o nly the bloc ked por t s o n a p er-VLAN or per-instanc e ba sis, use th e show spantree blockedports co mmand .
2-1221 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show spantree bpdu-filter show spantree bpdu-filter T o display information ab out BPDU filtering , use the show spantree bpdu-f ilter com mand.
2-1222 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show spant ree bpd u-guard show spantree bp du-guard T o display informat ion about BPDU guard, use the show spantr ee bpdu-guard comman d.
2-1223 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show spantree bp du-skewing show spantree bp du-skewing T o display BPDU ske wing detection status, use the show spantree bpdu-skewing comm an d.
2-1224 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show spant ree bpd u-skewi ng .
2-1225 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show spantree conflicts show spantree conflicts T o .
2-1226 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show spant ree con flicts This e xample shows th e out.
2-1227 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show sp a ntree defaultcostmode show spantree de faultcostmode T o display the curr ent def ault port c ost mode, use th e sh ow span tree de fault costmo de command.
2-1228 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show spant ree gua rd show spantree gu ard T o display spanning t ree guard inf ormatio n for the VLANs or i nstances on a po rt, use the show s pantr ee guard com mand .
2-1229 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show spantr ee guard Exam ples Th is exampl e sh ows.
2-1230 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show spant ree mapp ing show spantree mappi ng T o display VLAN and instan ce mapping informa tion, use the show spantree mapping .
2-1231 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show spantre e mapping This e xample shows h ow to d.
2-1232 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show s pant ree mis tp -instanc e show spantree mistp-instan ce T o display instance infor mation, use the show spantree mistp-instance comma nd.
2-1233 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show spantree mistp-in stance Ta b l e 2 - 1 0 0 des.
2-1234 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show spant ree mst show spantree mst T o display MST informa tion, use the show spantree mst comm and.
2-1235 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show spa ntr e e m s t This e xample shows h ow to d.
2-1236 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show spant ree mst con fig show spantree mst conf ig T.
2-1237 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show spantree mst config 7 301-400 8 - 9 - 10 - 11 -.
2-1238 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show spant ree port fa st show spantree po rtfast T o di splay Port Fast infor ma tion, use th e show spantree portfast comman d.
2-1239 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s sh ow spantree porti nstancecost show spantree po rtinstanc ecost T o sho w the path cost fo r the instan ces on a port , use the show spantree portinstancecost co mman d.
2-1240 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show spant ree port v lancost show spantree po rtvlanco st T o sho w the path cost for the VLANs or e xtended-r ange VLANs, use the show spantree portvlanc ost comm and.
2-1241 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show spantree statistics show spantree sta tistics T o sho w spanning tree statistica l information, us e the show spantree statistics comman d.
2-1242 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show s pant ree stat istics designated_cost 0 designat.
2-1243 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show spantree statistics This e x ample sho ws how t.
2-1244 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show s pant ree stat istics num of similar bpdus to pr.
2-1245 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show spantree statistics bridge forward delay 15(15).
2-1246 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show s pant ree stat istics desig nated_ bridge Bridge i denti fier of the bridge assumed to be t he design ated b ridge f or t he LAN associ ated wi th the port.
2-1247 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show spantree statistics VLAN- based infor matio n and st ati stics span ningtr ee type T ype of spanning t ree (IEE E, IBM, CISCO ).
2-1248 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show s pant ree stat istics Relat e d Commands clear s pantr ee statistics show spantr ee curr_sr c_mac Source MA C ad dr ess o f th e co nf igured BP DU re ceiv ed on a pa rti cular port.
2-1249 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show sp a ntree summa r y show spantree su mmary T o d isplay a summ ar y of spanni ng tr ee i nfo rma tio n, use t he show spantree summary comman d.
2-1250 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show s pant ree sum m ary This exam ple shows how to d.
2-1251 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show sp a ntree summa r y This exam ple sh ows how t.
2-1252 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show spant ree upl in kfast show spantree up linkfast T o sho w the UplinkFa st feature settings, use the show spantr ee uplinkfast comm and.
2-1253 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show spantree up linkfast This e xample sho ws how t.
2-1254 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show ssh show ssh T o display information ab out Secure Shell (SSH) sessions, use the sho w ssh com mand.
2-1255 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show start up-conf ig show startu p-config T o displ.
2-1256 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show star tup-co nfi g #vtp set vtp domain dan set vtp.
2-1257 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show start up-conf ig #module 8 empty ! #module 9 em.
2-1258 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show summertime show summertime T o disp lay th e curr ent st atus of the sum mertime feat ure, us e the sho w summertime command .
2-1259 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show system show system T o display system information, use the sho w system command. show system Syntax Descript ion This c omm and ha s no keywords or argume nts.
2-1260 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show sy stem Core Dump Core File ---------------------.
2-1261 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show system Core Dump Core File --------------------.
2-1262 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show sy stem Relat e d Commands set system ba ud set s.
2-1263 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show system health show system health T o test system health and display the resu lts of the tests, use the show system health co mman d.
2-1264 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show sys te m health rbus_timeout = 0x1 L3 Non zero registers - none.
2-1265 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show system highava ilability show system hi ghava ilability T o display the system high-a va ilability configurat io n settings, use the show system higha vailability comm an d.
2-1266 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show sy stem info- log show system info-log T o display the conf iguration of the system information loggin g feature, use the sho w system info-log comm and.
2-1267 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show system profile show system profile T o display the system prof ile conf iguration, use the show system pr ofile comman d.
2-1268 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show sy stem sanity show system sanity T o displ ay the outpu t for the san ity check s that the syst em has perf ormed, use the show system sanity comm and.
2-1269 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show system sanity The following vlans have max age .
2-1270 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show sys te m superv is or- update show system supervi.
2-1271 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show system switchmode show system switchmode T o display the system switching mode setting, use the show system switchmode co mmand.
2-1272 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show tacac s show tacacs T o di splay the T ACA CS+ prot ocol con figuratio n, use the show taca cs comm and.
2-1273 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show tacacs Relat e d Commands set tac acs a ttemp t.
2-1274 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show te ch- suppor t show tech-supp ort T o di splay s.
2-1275 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show tech-su pport • sho w micr ocode • show mod.
Chapter 2 Catalyst 6500 Series Sw itch and ROM Monitor Comm ands sho w test 2-1276 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 222 show test T o display the errors r eporte.
2-1277 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show test DontForwardTest: . DontLearnTest: . ConditionalLearnTest: . BadBpduTest: . TrapTest: . Loopback Status [Reported by Module 2] : Ports 1 2 ----------- .
2-1278 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show te st This e xample shows the di splay if you do not specify a module: Console> show test Environmental Status (.
2-1279 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show test Ta b l e 2 - 1 0 5 describe s the p ossibl e f ield s in th e show test command o utput. Th e fields shown depe nd on the m odule ty pe qu er ied.
2-1280 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show te st Relat e d Commands set tes t di agfa il- ac tion set test dia glevel DPRAM T est results for the dual-po rt RAM.
2-1281 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show time show time T o display the curren t time of day in the system clo ck, use the show time command.
2-1282 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show timezo ne show timezone T o disp lay th e curr ent time zone and o ff set, use the show ti mezone comman d.
2-1283 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show top show top T o start the T opN process , use the show top command.
2-1284 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show top Usage Guid el i nes Y ou ca n termina te T opN processe s with the background option specified only by using the clea r to p [ r eport_num ] comm and.
2-1285 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show top r eport show top re port T o list all T opN processes and specific T opN reports, use the show top r eport comm and.
2-1286 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show top rep ort This exampl e shows ho w to displa y .
2-1287 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show traffic show traffic T o displa y traf fic and peak informat ion, use the show traffic command. show traffic Syntax Descript ion This c omm and ha s no keywords or argume nts.
2-1288 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show trunk show trunk T o display trunking informati o n for the switch, use the show trunk comm and.
2-1289 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s sho w tr unk Exam ples Th is example sh ows how to d.
2-1290 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show trunk Port Vlans allowed and active in management.
2-1291 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s s h ow ud ld show udld T o display UDLD informatio n, use the show udld co mmand . show udl d show udl d port [ mod [ /port ]] Syntax Descript ion Defaults Thi s command has no de fa ult set tings.
2-1292 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show ud ld Ta b l e 2 - 1 0 7 describes the fiel ds in the show udld comma nd output.
2-1293 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show users show us ers T o show if the console por t is acti ve an d to list all acti ve T elnet sessions with the IP a ddress or IP alias of the originatin g host, use the show use rs comm and.
Chapter 2 Catalyst 6500 Series Sw itch and ROM Monitor Comm ands show versio n 2-1294 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 22 show version T o display so ftware, h ardwar e, and web in terfa ce versio n informa tion, use the show ve r s i o n co mm and .
2-1295 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show version DRAM FLASH NVRAM Module Total Used Free.
2-1296 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show vers ion Ta b l e 2 - 1 0 8 describes the fiel ds in the show v ersion com mand ou tput.
2-1297 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show v lan show vlan T o display VLAN informatio n, use the show vlan comm and.
2-1298 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show vlan 20 VLAN0020 active 20 21 VLAN0021 active 21 .
2-1299 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show v lan This exam ple sh ows how to displa y inf .
2-1300 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show vlan This exam ple shows how to di spla y a s umm.
2-1301 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show v lan Relat e d Commands set trunk set vlan show trunk Second ary-T ype T ype of second ary VLAN port.
2-1302 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show vlan counte rs show vlan cou nters T o displa y counte rs for al l VLANs or a range of VLANs, use th e show vlan co unters comm and.
2-1303 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show vlan count ers Relat e d Commands clear vl an counters L3-O ut-N onUn ica st-Pkts La yer 3 n onu nica st p ackets for warde d p er o utput VL AN .
2-1304 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show vlan verify-p ort -provision ing show vlan verify.
2-1305 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show vmps show vmps T o di splay VM PS configura tion i nfor ma tion, use the show vmps comma nd. show vmps [ noalias ] Syntax Descript ion Defaults Thi s command has no de fa ult set tings.
2-1306 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show vm ps Ta b l e 2 - 1 1 1 describes the fiel ds in the show vmps c omman d output.
2-1307 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show v mp s mac show vmps mac T o disp lay t he MA C-addr ess- to-VL AN mapp ing ta ble, u se the sho w vmps mac command.
2-1308 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show vm ps statistic s show vmps statistics T o display the VMPS statistics, u se the show vmps statistics command.
2-1309 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show vm ps vl an show vmps vlan T o displa y all the MA C addresses assi gned to a VLAN in the VMPS table, use the sho w vmps vlan comm and.
2-1310 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show vtp show vtp T o displa y devices and c onflict s betwee n devices in the VLAN Trunk Protocol (V TP) version 3 domain, use the show vtp command .
2-1311 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show vtp Relat e d Commands set vtp.
2-1312 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show vtp do main show vtp domain T o display VTP domain informati on, use the show vtp domain comman d. show vtp domain Syntax D escr i pti on This c omm and has n o keywords or a rgument s.
2-1313 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show vtp domain Relat e d Commands set vtp show vtp statistics Notificat ions Notificatio ns to SNM P (e nabl ed or disa bled ).
2-1314 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands show vtp s ta tistics show vtp statisti cs T o display VTP statistics, use th e s how vtp st atist ics command.
2-1315 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s show vtp stati stics Relat e d Commands clear vt p statistic s set vtp No of con fig revision errors Nu mber of conf ig re vision er rors.
2-1316 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands slip slip T o attac h or detach Se rial Line Int ernet Prot ocol (SLI P) for the co nsole port, use the slip command.
2-1317 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s sque eze squeeze T o d el et e Fl ash fil es pe rm an en tly , us e th e squeeze command. squeeze [ m/ ] de vice : Syntax Descript ion Defaults Thi s command has no de fa ult set tings.
Chapter 2 Catalyst 6500 Series Sw itch and ROM Monitor Comm ands stack 2-1318 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 22 stack T o dump a st ack trace o f frames , use the stack command . stack [ -d | - m ] [ num ] Syntax Descript ion Defaults The d ef ault for num is f ive frames.
2-1319 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s switch switch T o swi t ch the c lock f rom the super v i sor cloc k to th e inte rn al c l ock or fr om th e act ive supervisor engi ne to the stan dby supervis or engine , use the switch co mman d.
2-1320 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands switch co nsole switch console T o swi tch the c ons ole con nection physic ally to t he MSFC on the active supervisor engi ne, us e the switch consol e command.
2-1321 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s switch fabric switch fabric T o reset th e acti ve Switch F abric Module and allo w the standb y Switch Fa bric Module to take o ver , use the switch fabric command .
2-1322 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands sync sync T o write th e workin g in-cor e copy o f en vironment v ariables and th e aliases o ut to NVRAM so the y are read on the ne xt reset, use the sync command.
2-1323 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s sysret sysret T o display the return informatio n from the last booted system image, use the sysret comman d.
2-1324 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands tclquit tclquit T o exit f rom a to ol co mma nd lan guage (TC L) shel l, use t he t clquit com mand. tclquit Syntax D escr i pti on This c omm and has n o keywords or a rgument s.
2-1325 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s tclsh tclsh T o sta rt a tool co mm and langu age (T CL) sh ell, use the tc lsh command. tclsh Syntax Descript ion This c omm and ha s no keywords or argume nts.
2-1326 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands telnet telnet T o start a T elnet conn ection to a rem ote host or to encrypt a T elnet session, us e the telnet command .
2-1327 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s test cable-diagnostics test cable-d iagnostics T o t.
2-1328 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands test cab le-diagn osti cs Exam ples Th is example sh o.
2-1329 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s test snmp trap test snmp trap T o send an SNMP trap message to the trap recei vers, use the test snmp trap co mman d.
2-1330 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands tracerou te traceroute T o di splay a h op- by-hop path th rough an I P ne twork f rom th e Catal yst 6500 se rie s swi tch t o a spe ci fic destinati on ho st, use the tracer oute co mmand.
2-1331 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s t racer out e Usage Guid el i nes T o i n te r r up t tr aceroute after the command has been issued , pre ss Ctrl- C .
2-1332 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands tracerou te Ta b l e 2 - 1 1 8 describes the fiel ds in the trac ero ute comm an d o utp u t.
2-1333 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s unal ias unalias T o remov e the alias name and ass ociated value from the alias lis t, use the unalias comman d.
2-1334 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands undelet e undelete T o recover a delete d file on a Flash memo ry device, use the undelete comman d.
2-1335 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s uns et= varn ame unset=v arname T o remov e a variab le name from the v ariable list, use the unset= varnam e command.
2-1336 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands varn ame= varname= T o set the v ariable VA R N A M E to var value , use th e varnam e= command. Note that th e syntax va rnam e = sets the variable to a NULL stri ng.
2-1337 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s verify verify T o co nf irm the checks um of a f ile on a Fla sh de vice, u se the ver ify command.
2-1338 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands wait wait T o cau se the C LI to paus e for a specif ied nu mber of se conds b efore ex ecuting t h e ne xt comman d, use the wait comman d.
2-1339 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s whichb oot whichboot T o determine which file booted, use the whichboot command . whichboot Syntax Descript ion This c omm and ha s no a rgume nts o r keywords.
2-1340 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands write write T o uplo ad the cu rren t configuratio n to th e network or di splay th e configur ation inf orma tion cu rrently i n running m em ory , u s e t he write comman d.
2-1341 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s write Exam ples Th is example sh ows how to upload the syste m5 .
2-1342 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands write This exam ple sh ows how to uploa d t he ru nni ng syst em configu ratio n to a pre spe cified loc ation : Console> (enable) write memory Upload configuration to bootflash:switch.
2-1343 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s write tech-support write tech-sup port T o g ener at.
2-1344 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands write tech -suppo rt Note I f y o u a re u pl o a d i .
2-1345 Catalyst 6500 Series Switch Command Refer ence—Release 8.4 OL-6244-01 Chapter 2 Cata ly st 65 00 Series Switch an d ROM Monitor Co mmand s write tech-support • show pr oc mem • show pr oc.
2-1346 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Chapter 2 Catalyst 6500 Serie s Switch and ROM Monitor Commands write tech -suppo rt.
A- 1 Catalyst 6500 Series Switch Command Reference—Release 8.4 OL-6244-01 APPEND IX A Acronyms T able A-1 d ef ines the ac ronyms used in this publication .
A- 2 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Appendix A Acronyms C OP S - D S COPS Differentiated Serv ices COPS-PR CO PS f or Pr ov isi oni ng CoS c lass o f servic.
A-3 Catalyst 6500 Series Switch Command Reference—Release 8.4 OL-6244-01 Appendix A Acronyms FW SM Firewall Ser v ices Module GARP Genera l At tribute Registration Pr otoc ol GBIC Gigabit Interf ace.
A- 4 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Appendix A Acronyms LES L AN emu lation ser ver or line erro red second s LLC logic al link control MA C Me dia Access C.
A-5 Catalyst 6500 Series Switch Command Reference—Release 8.4 OL-6244-01 Appendix A Acronyms PCR peak cell rate PDP policy deci sio n point PDU proto col data unit PEP policy enf orcement p oint PFC.
A- 6 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Appendix A Acronyms SMP standb y moni tor present SMT stati on manageme nt SN serial number SN AP Subnet work Ac cess Pr.
A-7 Catalyst 6500 Series Switch Command Reference—Release 8.4 OL-6244-01 Appendix A Acronyms VI D ver sion iden tifie r VID VLAN I D VIP virtual IP addre ss VLAN virtual LAN VMPS VLAN Membershi p Po.
A- 8 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Appendix A Acronyms.
B-1 Catalyst 6500 Series Switch Command Reference—Release 8.4 OL-6244-01 APPEND IX B Acknowledgments for Open-Source Software The C atalyst op erat ing syst em soft ware pipe comman d uses H enry Spe ncer’ s regular expressio n libra ry (regex).
B-2 Catalyst 6500 S eries Switch C ommand Refe rence—Releas e 8.4 OL-6244-01 Appendi x B Acknowledgment s for Open-S ource Sof tware.
IN-1 Catalyst 6500 Series Switch Command Reference—Release 8.4 OL-6244-01 INDEX Symbols ? (help) comm an d c om ple ti o n 1-11 displaying ma tc hes 1-11 switch CLI 1-9 Numerics 3DES keys defining 2-374 removi ng 2-50 802.
Index IN-2 Catalyst 6500 Series S witch Command Reference—Release 8.4 OL-6244-0 1 See se curity ACL accoun ting RADIUS disabling ac countin g of normal login session 2-242 disabling ac coun ting of .
Inde x IN-3 Catalyst 6500 Series Switch Command Reference—Release 8.4 OL-6244-01 configuratio n informatio n 2-804 curr ent stat us inf ormat ion 2-804 enab lin g 2-263, 2-430 resetting to default 2.
Index IN-4 Catalyst 6500 Series S witch Command Reference—Release 8.4 OL-6244-0 1 Callhome setting fragmen t size 2-388 CAM tables adding e ntries 2-280 cleari ng configura tion for MAC-add ress lim.
Inde x IN-5 Catalyst 6500 Series Switch Command Reference—Release 8.4 OL-6244-01 console p ort 1-2 ending sessi on 2-225 IP addresses 1-11 IP aliase s 1-11 IPX addr esses 1-11 MAC a ddr esses 1-11 o.
Index IN-6 Catalyst 6500 Series S witch Command Reference—Release 8.4 OL-6244-0 1 checkp oi nt f ile s clearin g 2-22 crea ting 2-294 displaying 2-841 rolling back 2-299 cleari ng conte nts 2-13 com.
Inde x IN-7 Catalyst 6500 Series Switch Command Reference—Release 8.4 OL-6244-01 setting export destinatio n 2-594 daylight sav ing time displaying c lock 2-1258 setting clock 2-445, 2-731 debuggi n.
Index IN-8 Catalyst 6500 Series S witch Command Reference—Release 8.4 OL-6244-0 1 rcp confi gura tion fil e 2-184 dow nloa ding ima ges 2-205 DSCP-to-CoS map clearin g 2-112 dump log clearin g 2-57 displaying 2-938 DVLAN displaying sta tistics 2-866 E EAP config uring 8 02.
Inde x IN-9 Catalyst 6500 Series Switch Command Reference—Release 8.4 OL-6244-01 displayin g status of multiple VLAN inter face featu re 2-885 displaying V LANs 2-1297 securing VLANs 2-774 setting m.
Index IN- 10 Catalyst 6500 Series S witch Command Reference—Release 8.4 OL-6244-0 1 high avai lability disabling 2-741 disabling ve rsioning 2-742 displaying c onfigur ation setting s 2-1265 enab li.
Inde x IN- 11 Catalyst 6500 Series Switch Command Reference—Release 8.4 OL-6244-01 See IGM P Intern et Protocol See IP addres ses inventor y displaying PID 2-913 displayi ng product listing for all .
Index IN- 12 Catalyst 6500 Series S witch Command Reference—Release 8.4 OL-6244-0 1 L l2trace 2-217 LACP clea ring chan nel coun ters 2-26 displaying c hannel information 2-1077 restoring ch annel c.
Inde x IN- 13 Catalyst 6500 Series Switch Command Reference—Release 8.4 OL-6244-01 enab l in g o n VL A Ns 2-249 MAC c oun ters clearin g 2-26 displaying 2-953 displaying c hanne l po rt ut ilizat i.
Index IN- 14 Catalyst 6500 Series S witch Command Reference—Release 8.4 OL-6244-0 1 displayi ng maximum nu mber of routes confi gured for protoc ols 2-964 displaying MLS L ayer 3 p acket i nform ati.
Inde x IN- 15 Catalyst 6500 Series Switch Command Reference—Release 8.4 OL-6244-01 disp layin g current stat us of li ne prot ocol state determin ation of M SM 2-1001 displaying li ne pr otoc ol sta.
Index IN- 16 Catalyst 6500 Series S witch Command Reference—Release 8.4 OL-6244-0 1 return ing from pri vileg ed mode 2-203 NTP clearin g to de fault time zone 2-86 config uring I P a ddress of N TP.
Inde x IN- 17 Catalyst 6500 Series Switch Command Reference—Release 8.4 OL-6244-01 policed-d scp table resetting to default 2-119 policy-b ased forw arding See PBF port access cont rol lists See PAC.
Index IN- 18 Catalyst 6500 Series S witch Command Reference—Release 8.4 OL-6244-0 1 port spee d config uring 2-534 powering m odule 2-433 power redun dancy turnin g redundan cy betwee n power sup pl.
Inde x IN- 19 Catalyst 6500 Series Switch Command Reference—Release 8.4 OL-6244-01 displaying policy sour ce infor mation 2-1151 displaying relat ed information 2-1136 displayi ng st atist ic s fo r.
Index IN- 20 Catalyst 6500 Series S witch Command Reference—Release 8.4 OL-6244-0 1 clearin g microflow policin g rule 2-120 displaying po licing i nform ation 2-1149 mappin g i n-pr ofi le DS CPs c.
Inde x IN- 21 Catalyst 6500 Series Switch Command Reference—Release 8.4 OL-6244-01 acce ssing 1-17 operati ng 1-17 root gu ar d disabling 2-692 displaying informatio n 2-1228 enab lin g 2-692 rou ti.
Index IN- 22 Catalyst 6500 Series S witch Command Reference—Release 8.4 OL-6244-0 1 SmartPorts setting Cisco Desktop configu ration macro 2-507 setting Cisco global macro 2-406 setting Cisco IP Phon.
Inde x IN- 23 Catalyst 6500 Series Switch Command Reference—Release 8.4 OL-6244-01 displaying informatio n 2-1201 SNMP per mit list adding 2-360 clearin g 2-42 SNMP trap re ceiver table removi ng en.
Index IN- 24 Catalyst 6500 Series S witch Command Reference—Release 8.4 OL-6244-0 1 setting instance bridge priority 2-722 setting mode 2-700 setting port bridge priority 2-718 setting port cost mod.
Inde x IN- 25 Catalyst 6500 Series Switch Command Reference—Release 8.4 OL-6244-01 displaying seve rity leve l of m essages se nt to syslog history ta ble 2-942, 2-945, 2-947, 2-949, 2-950, 2-951 du.
Index IN- 26 Catalyst 6500 Series S witch Command Reference—Release 8.4 OL-6244-0 1 configurin g maximum number of login attempts 2-757 defining TA CACS+ se rver 2-760 disabling ac countin g of norm.
Inde x IN- 27 Catalyst 6500 Series Switch Command Reference—Release 8.4 OL-6244-01 starting 2-1283 stopping pro cess 2-170 traffic displaying informatio n 2-1287 traff ic filterin g config uring 2-2.
Index IN- 28 Catalyst 6500 Series S witch Command Reference—Release 8.4 OL-6244-0 1 displaying t runk port info rmat ion 2-1297 displaying V LAN infor mation 2-1297 displayi ng V LAN m appi ng t abl e info rm ation 2-1297 groupin g p orts int o VL AN mapping 8 02.
Inde x IN- 29 Catalyst 6500 Series Switch Command Reference—Release 8.4 OL-6244-01 W web interf ace config uring T CP p ort num ber 2-358 disabling HTT P server 2-359 displaying H TTP con figur atio.
Index IN- 30 Catalyst 6500 Series S witch Command Reference—Release 8.4 OL-6244-0 1.
Een belangrijk punt na aankoop van elk apparaat Cisco Systems OL-6244-01 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Cisco Systems OL-6244-01 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Cisco Systems OL-6244-01 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Cisco Systems OL-6244-01 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Cisco Systems OL-6244-01 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Cisco Systems OL-6244-01 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Cisco Systems OL-6244-01 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Cisco Systems OL-6244-01 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.