Gebruiksaanwijzing /service van het product PGW 2200 van de fabrikant Cisco Systems
Ga naar pagina of 436
Americas Headquarters Cisco Systems, In c. 170 West Tasman Drive San Jose, CA 951 34-1706 USA http://www.cisco.com Tel: 408 526-4000 800 553-NETS (638 7) Fax: 408 527-0883 Cisco PGW 220 0 S of tswitc h Release 9.
THE SPECIFICATION S AND INFORMATION RE GARDING THE PRODU CTS IN THIS MANU AL ARE SUBJECT TO CHANGE WITHOUT N OTICE. ALL STATEMENTS , INFORMATION, AND RECOMMENDATI ONS IN THI S MANUAL ARE BE LIEVED TO BE A CCURATE BUT ARE PRESENTED WI THOUT WARRANTY OF ANY KIND, EX PRESS OR IMPLIED.
iii Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 CONTENTS Preface ix Document Objectives ix Audience ix Related Documentation ix Obtaining Documenta.
Contents iv Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Removing the Solstice Dis kSuite 2-88 Installing the Log and Spool File Systems (CSCOh024 ).
Contents v Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-01 Adding a User with Minimal MML Privileges 4-12 Configuring SNMP Support Resources 4-13 Migrating the SNMP Configuration to a More Se cure Environment (for Cisco PGW 2200 So ftswitch Release 9.
Contents vi Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Verifying Datab ase Synchroni zation 4-87 Synchronizing Da tabases 4-88 Checking for Instal.
Contents vii Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-01 Falling Back to Solaris 8 on the Second Disk Drive 5-28 Restoring the Original Cisco PGW 2.
Contents viii Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Sample Configured XECfgParm.dat Files for Cisco PGW 2200 Softswitch Release 9.7(3) D-27 Sample Configured XECfgParm.dat Files for Cisco PGW 2200 Softswitch Release 9.
ix Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Preface This pref ace describes the object iv es of th is docume nt and explains ho w to find add itional information on related products and serv ices.
x Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Preface http://www .cisco.com/en/US/products/hw/ vcallcon/ps2027/produ cts_documentation_roadmap s_list.
C HAPTER 1-1 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 1 Preparing for Sun Solaris Operating System and Cisco PGW 2200 Softswitch Software Insta.
1-2 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 1 Preparing for Sun Solaris Operating System and Cisco PGW 2200 Softswitch Softwa re Installation Solaris 10, Cisco PGW 2200 Softswitc h Software Release 9.
1-3 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 1 Preparing for Sun Solaris Operating System and Cisco PG W 2200 Softswitch Software Installation Solaris 10, Cisco PGW 2200 Softswitch Software Rele ase 9.
1-4 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 1 Preparing for Sun Solaris Operating System and Cisco PGW 2200 Softswitch Softwa re Installation Solaris 10, Cisco PGW 2200 Softswitc h Software Release 9.
C HAPTER 2-1 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 2 Installing the Sun Sola ris 10 Operating System This chapter pro vides instructions for installin g th e packages that create the Sun Solaris 10 operating system and its operating en vironment on the Sun Netra and Sun Fire platforms.
2-2 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 2 Installing the Sun Solaris 10 Operating System Before You Start Before You Start Be sure to read the following cau tions, notes, and tips before i nstalling the Sun Solaris 10 operating system and the operating en vironment.
2-3 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operatin g Sy.
2-4 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 2 Installing the Sun Solaris 10 Operating System Loading the Su n Solaris 10 Operating System b. When the machine prompts for a password, type either ^ -d to pro ceed with normal startu p, or the root password for system maintenance.
2-5 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operatin g System Skipped interface bge0 Beginning system identification.
2-6 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 2 Installing the Sun Solaris 10 Operating System Loading the Su n Solaris 10 Operating Syst.
2-7 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operatin g Sy.
2-8 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 2 Installing the Sun Solaris 10 Operating System Loading the Su n Solaris 10 Operating System SUNWlibms........................done. 311.09 Mbytes remaining.
2-9 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operatin g System SUNWwsr2.........................done. 112.59 Mbytes remaining.
2-10 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 2 Installing the Sun Solaris 10 Operating System Loading the Su n Solaris 10 Operating System SUNWglmr.u.......................done. 37.04 Mbytes remaining.
2-11 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operatin g System SUNWrge..........................done. 3.26 Mbytes remaining.
2-12 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 2 Installing the Sun Solaris 10 Operating System Loading the Su n Solaris 10 Operating System Sun Fire V210, No Keyboard Copyright 2005 Sun Microsystems, Inc.
2-13 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operatin g S.
2-14 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 2 Installing the Sun Solaris 10 Operating System Loading the Su n Solaris 10 Operating System f. Sav e your change s and exit the Setup menu.
2-15 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operatin g S.
2-16 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 2 Installing the Sun Solaris 10 Operating System Loading the Su n Solaris 10 Operating Sys.
2-17 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operatin g System Warning: 1062 sector(s) in last cylinder unallocated /dev/rdsk/c1t0d0s5:116599770 sectors in 18978 cylinders of 48 tracks, 128 sectors 56933.
2-18 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 2 Installing the Sun Solaris 10 Operating System Loading the Su n Solaris 10 Operating System add link /dev/ipsecesp=../devices/pseudo/ipsecesp@0:ipsecesp add c devices/pseudo/keysock@0:keysock (136, 0) 0666 root sys add link /dev/keysock=.
2-19 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operatin g System Installation of <SUNWxwrtl> was successful.
2-20 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 2 Installing the Sun Solaris 10 Operating System Loading the Su n Solaris 10 Operating System Installation of <SUNWopenssl-libraries> was successful.
2-21 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operatin g System Installation of <SUNWtnetc> was successful.
2-22 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 2 Installing the Sun Solaris 10 Operating System Loading the Su n Solaris 10 Operating System Reboot client to install driver. Reboot client to install driver.
2-23 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operatin g System 2429 blocks Reboot client to install driver. Installation of <SUNW1394> was successful.
2-24 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 2 Installing the Sun Solaris 10 Operating System Loading the Su n Solaris 10 Operating System 671 blocks Installation of <SUNWgssk> was successful.
2-25 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operatin g System Installation of <SUNWzoner> was successful.
2-26 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 2 Installing the Sun Solaris 10 Operating System Loading the Su n Solaris 10 Operating System Installation of <SUNWeuodf> was successful.
2-27 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operatin g System Installation of <SUNWmkcd> was successful.
2-28 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 2 Installing the Sun Solaris 10 Operating System Loading the Su n Solaris 10 Operating System 497 blocks Installation of <SUNWroute> was successful.
2-29 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operatin g S.
2-30 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 2 Installing the Sun Solaris 10 Operating System Loading the Su n Solaris 10 Operating Sys.
2-31 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operatin g S.
2-32 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 2 Installing the Sun Solaris 10 Operating System Loading the Su n Solaris 10 Operating System Completed profile begin script.
2-33 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operatin g S.
2-34 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 2 Installing the Sun Solaris 10 Operating System Loading the Su n Solaris 10 Operating Sys.
2-35 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operatin g System add c devices/pseudo/tcp@0:tcp (42, 2) 0666 root sys add link /dev/tcp=.
2-36 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 2 Installing the Sun Solaris 10 Operating System Loading the Su n Solaris 10 Operating System Installation of <SUNWzlib> was successful.
2-37 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operatin g System Installation of <SUNWadmr> was successful.
2-38 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 2 Installing the Sun Solaris 10 Operating System Loading the Su n Solaris 10 Operating System 8 blocks Installation of <SUNWkrbr> was successful.
2-39 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operatin g System Installation of <SUNWudapltu> was successful.
2-40 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 2 Installing the Sun Solaris 10 Operating System Loading the Su n Solaris 10 Operating System 379 blocks Reboot client to install driver. Installation of <SK98sol> was successful.
2-41 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operatin g System Installation of <SUNWamr> was successful.
2-42 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 2 Installing the Sun Solaris 10 Operating System Loading the Su n Solaris 10 Operating System Installation of <SUNWnisu> was successful.
2-43 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operatin g System 918 blocks Installation of <SUNWcpcu> was successful.
2-44 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 2 Installing the Sun Solaris 10 Operating System Loading the Su n Solaris 10 Operating System 328 blocks Installation of <SUNWsacom> was successful.
2-45 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operatin g System Installation of <SUNWqlc> was successful.
2-46 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 2 Installing the Sun Solaris 10 Operating System Loading the Su n Solaris 10 Operating Sys.
2-47 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operatin g S.
2-48 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 2 Installing the Sun Solaris 10 Operating System Loading the Su n Solaris 10 Operating Sys.
2-49 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operatin g S.
2-50 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 2 Installing the Sun Solaris 10 Operating System Loading the Su n Solaris 10 Operating System This system is configured with NFS version 4, which uses a domain name that is automatically derived from the system's name services.
2-51 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operatin g S.
2-52 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 2 Installing the Sun Solaris 10 Operating System Loading the Su n Solaris 10 Operating Sys.
2-53 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operatin g System Note This screen may sho w a dif ferent interf ace, de pending on the platform and PC I card that are installed.
2-54 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 2 Installing the Sun Solaris 10 Operating System Loading the Su n Solaris 10 Operating Sys.
2-55 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operatin g S.
2-56 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 2 Installing the Sun Solaris 10 Operating System Loading the Su n Solaris 10 Operating Sys.
2-57 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operatin g System Primary network interface: Yes Use DHCP: No Host name: va-host IP address: 10.
2-58 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 2 Installing the Sun Solaris 10 Operating System Loading the Su n Solaris 10 Operating System - Name Service ---------------------------------------------------------------- On this screen you must provide name service information.
2-59 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operatin g System Name service: NONE Domain name: Server address(es): Search domain(s): yourdomain.
2-60 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 2 Installing the Sun Solaris 10 Operating System Loading the Su n Solaris 10 Operating System x [ ] Belize x [ ] Bolivia x [ ] Brazil x [ ] Canada x [ ] Cayman Islands v [ ] Chile press Return to mark it [X].
2-61 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operatin g System - Confirm Information --------------------------------------------------------- > Confirm the following information.
2-62 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 2 Installing the Sun Solaris 10 Operating System Loading the Su n Solaris 10 Operating Sys.
2-63 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operatin g S.
2-64 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 2 Installing the Sun Solaris 10 Operating System Loading the Su n Solaris 10 Operating System Installing SunVTS Framework (Root) as <SUNWvtsr> ## Installing part 1 of 1.
2-65 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operatin g System /opt/SUNWexplo/tools/vxfs /opt/SUNWexplo/tools/vxvm [ verifying class <none> ] ## Executing postinstall script.
2-66 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 2 Installing the Sun Solaris 10 Operating System Loading the Su n Solaris 10 Operating System ## Executing postinstall script. Installation of <SUNWpsr> was successful.
2-67 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operatin g System Sudo - superuser do(sparc) 1.6.8.5,REV=2006.03.
2-68 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 2 Installing the Sun Solaris 10 Operating System Loading the Su n Solaris 10 Operating System SUCH DAMAGE. YOU MUST OBSERVE ANY AUTHORS' CONDITIONS WITH RESPECT TO INDIVIDUAL COMPONENTS PROVIDED WITHIN THIS CODE.
2-69 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operatin g System 119963-08 Checking installed patches... Verifying sufficient filesystem capacity (dry run method).
2-70 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 2 Installing the Sun Solaris 10 Operating System Loading the Su n Solaris 10 Operating Sys.
2-71 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operatin g S.
2-72 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 2 Installing the Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operating E nvironment Step 7 Remove the CD from the CD-R OM drive.
2-73 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Op erating E.
2-74 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 2 Installing the Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operating E nvironment The system lists the patches that it wil l install.
2-75 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Op erating Environment Note If you used the CD-ROM dri ve to load the So laris 10 patch cluster , eject the CD prior to rebooting.
2-76 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 2 Installing the Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operating E nvironment Using </opt/sun_install> as the package base directory.
2-77 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Op erating Environment not indicate a problem. Please look at the log file after the rest of the patches are applied Install Solaris 10 patches from set 2 .
2-78 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 2 Installing the Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operating E nvironment Step 1 Load the Cisco Solaris 10 Operat ing En vi ronment CD into t he CD-R O M dri ve.
2-79 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Op erating Environment !! /opt/sun_install/DiskSuite and run the !! install_disksuite_1.
2-80 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 2 Installing the Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operating E nv.
2-81 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Op erating E.
2-82 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 2 Installing the Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operating E nv.
2-83 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Op erating Environment d3: Mirror is setup d6: Mirror is setup d9: Mirror is setup d12: Mirror is setup d15: Mirror is setup The machine will now reboot.
2-84 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 2 Installing the Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operating E nvironment mirror to the second disk. It will take some time for the disk to be completely mirrored.
2-85 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Op erating E.
2-86 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 2 Installing the Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operating E nvironment Note Disk1 is a system-maintained stan dard for the system's second hard disk.
2-87 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Op erating Environment . Executing last command: boot disk1 Boot device: /pci@1f,0/pci@1/scsi@8/disk@1,0 File and args: SunOS Release 5.
2-88 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 2 Installing the Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operating E nv.
2-89 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Op erating Environment This procedure un-mirrors the di sk partitions and remo ves the DiskSuite applicatio n from the platform.
2-90 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 2 Installing the Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operating E nvironment T o determine wheth er DiskSuite is installed and configured, run the /usr/sbin/metastat command.
2-91 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Op erating Environment Step 1 Load the Cisco Solaris 10 Operating En vironment CD int o the CD-R OM drive.
2-92 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 2 Installing the Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operating E nvironment Step 4 Answer y and press Enter to install the f iles.
2-93 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Op erating Environment AVAILABLE DISK SELECTIONS: 0. c0t0d0 <SUN36G cyl 24620 alt 2 hd 27 sec 107> /pci@1f,4000/scsi@3/sd@0,0 1.
2-94 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 2 Installing the Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operating E nv.
2-95 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Op erating E.
2-96 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 2 Installing the Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operating E nv.
2-97 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Op erating E.
2-98 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 2 Installing the Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operating E nvironment Note If you hav e installed the Solaris DiskSuite pack age (CSCOh023) on your system, the message s below are displayed du ring system boot.
2-99 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Op erating Environment The selected base directory </opt/sun_install> must exist before installation is attempted.
2-100 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 2 Installing the Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operating E n.
2-101 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Op erating .
2-102 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 2 Installing the Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operating E n.
2-103 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Op erating .
2-104 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 2 Installing the Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operating E nvironment Note The installation of this packag e does not automatically enable ft p communications on your host.
2-105 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Op erating Environment /opt/sun_install/SolPkg/SUNWnfsckr.tar.
2-106 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 2 Installing the Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operating E nvironment X Window System Optional Clients(sparc) 6.
2-107 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Op erating Environment This package contains scripts which will be executed with super-user permission during the process of installing this package.
2-108 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 2 Installing the Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operating E nvironment including all modifications or additions, on a medium and in a form allowing fully working executable programs to be produced.
2-109 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Op erating Environment 7. USE, MODIFICATION, OR REDISTRIBUTION, OF THIS SOFTWARE IMPLIES ACCEPTANCE OF ALL TERMS AND CONDITIONS OF THIS LICENSE.
2-110 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 2 Installing the Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operating E n.
2-111 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Op erating Environment /etc/opt <shared pathname not removed> /etc <shared pathname not removed> ## Updating system information.
2-112 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 2 Installing the Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operating E n.
2-113 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Op erating Environment ## Installing part 1 of 1. y y y 94197 blocks Installation of <SUNWvtsts> was successful.
2-114 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 2 Installing the Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operating E nvironment ## Processing package information. ## Processing system information.
2-115 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Op erating .
2-116 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 2 Installing the Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operating E n.
2-117 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Op erating Environment Processing package instance <SUNWnfsskr> from </tmp> Network File System (NFS) server kernel support (Root)(sparc) 11.
2-118 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 2 Installing the Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operating E nvironment Note If you need to disable the ftp communications softw are, use the svcadm disable ftp command.
2-119 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Op erating Environment ## Verifying disk space requirements. ## Checking for conflicts with packages already installed.
2-120 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 2 Installing the Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operating E nvironment X Window System Optional Clients(i386) 6.
2-121 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Op erating Environment 7 package pathnames are already properly installed.
2-122 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 2 Installing the Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operating E nvironment an irrevocable offer to provide a copy of the Source Code for up to three years at the cost of materials and delivery.
2-123 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Op erating .
2-124 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 2 Installing the Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operating E nvironment IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
2-125 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Op erating Environment ## Verifying package <SUNWvtsr> dependencies in global zone ## Processing package information.
2-126 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 2 Installing the Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operating E n.
2-127 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Op erating Environment Installation of <SUNWvtsr> was successful.
2-128 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 2 Installing the Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operating E nvironment Copyright 2007 Sun Microsystems, Inc. All rights reserved.
2-129 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Op erating Environment installed with this package NTP software is installed and configured.
2-130 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 2 Installing the Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operating E nvironment 1 CSCOh021 Media Gateway Controller Solaris 10 test for SPARC/Opteron (sparc,i386) 3.
2-131 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Op erating .
2-132 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 2 Installing the Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operating E n.
2-133 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Op erating Environment Host Address: 10.0.49.119 Host ID: 18089793 Domain Name: e1000g2(nettest) Host_Name: Host Address: 172.
2-134 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 2 Installing the Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operating E nvironment Central Processor Unit Test all .
2-135 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Op erating .
2-136 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 2 Installing the Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operating E n.
2-137 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Op erating .
2-138 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 2 Installing the Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operating E nvironment This completes the Sparc-based Solar is 10 Patch cluster installati on procedures.
2-139 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Op erating Environment Figur e 2-1 Syst em Agr eement Step 2 Accept the agreement in the Figure 2-1 .
2-140 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 2 Installing the Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operating E nvironment Figur e 2-3 W ar ning Message Windo w Step 5 Check the check box and click Ye s on the w arning message windo w .
2-141 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Op erating .
2-142 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 2 Installing the Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operating E nvironment Figure 2-5 Sun Fire X4600/X460 0 M2 Server Back P anel Step 4 Press Enter on the t erminal de vice.
2-143 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Op erating Environment Start ILOM Using Secure HTTP Follo w the followi ng steps to start the ILOM using secure HTTP .
2-144 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 2 Installing the Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operating E n.
2-145 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Op erating Environment Figur e 2-8 LAN Configuratio n in BIOS Set up Utility on Sun N etra X4200 M2 Platf or m Step 6 Choose Static in the IP Assig nment.
2-146 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 2 Installing the Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operating E nvironment Figur e 2-9 Sun Integr at ed Lights Out Manager Step 3 Click the Remote Contr ol tab .
2-147 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Op erating Environment Figure 2-1 0 Sun IL OM Remote Console This comple tes the ILOM con f igurati on on the Sun Netr a X4200 M2 plat form.
2-148 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 2 Installing the Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operating E nvironment Figur e 2-1 1 Syst em Output on IL OM Remote Co ntrol C onsole Step 4 Choose the desired console d evice as sh own in Figure 2-12 .
2-149 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 2 Installing th e Sun Solaris 10 Operating System Loading the Sun Solaris 10 Op erating .
2-150 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 2 Installing the Sun Solaris 10 Operating System Loading the Sun Solaris 10 Operating E n.
C HAPTER 3-1 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 3 Installing the Cisco PGW 2200 Softswitch Software Release 9.8 and Higher This chapter describes how to install Cisco PG W 2200 Softswitch and la ter releases of the Cisco PGW 2200 Softswitch software.
3-2 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 3 Installing the Cisco PGW 2200 Softswitch Software Relea se 9.
3-3 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 3 Installing the Cisco PGW 2200 Softswitch Software Release 9.8 and Higher Installing the Cisco PGW 2200 Softswi tch Software Release 9.8 and Higher Releases Installing the Cisco PGW 2200 Softswitch Software Release 9.
3-4 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 3 Installing the Cisco PGW 2200 Softswitch Software Relea se 9.8 and Higher Installing the Cisco PGW 2200 Softswitch Software Releas e 9.8 and Higher Releases Step 6 Enter y to install the CSCOg u000 utilities packag e on this host.
3-5 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 3 Installing the Cisco PGW 2200 Softswitch Software Release 9.8 and Higher Installing the Cisco PGW 2200 Softswi tch Software Release 9.8 and Higher Releases Use supplied admin file for unattended install? [n] [y,n,?,q] c.
3-6 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 3 Installing the Cisco PGW 2200 Softswitch Software Relea se 9.8 and Higher Installing the Cisco PGW 2200 Softswitch Software Releas e 9.8 and Higher Releases Installing libengif.
3-7 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 3 Installing the Cisco PGW 2200 Softswitch Software Release 9.8 and Higher Installing the Cisco PGW 2200 Softswi tch Software Release 9.8 and Higher Releases NOTE: Each TimesTen installation is identified by a unique instance name.
3-8 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 3 Installing the Cisco PGW 2200 Softswitch Software Relea se 9.8 and Higher Installing the Cisco PGW 2200 Softswitch Software Releas e 9.8 and Higher Releases Copyright (c) 1996-2006, Oracle.
3-9 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 3 Installing the Cisco PGW 2200 Softswitch Software Release 9.8 and Higher Installing the Cisco PGW 2200 Softswi tch Software Release 9.8 and Higher Releases Updating parameters for tibco.
3-10 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 3 Installing the Cisco PGW 2200 Softswitch Software Relea se 9.
3-11 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 3 Installing the Cisco PGW 2200 Softswitch Software Release 9.8 and Higher Installing the Cisco PGW 2200 Softswi tch Software Release 9.8 and Higher Releases b.
3-12 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 3 Installing the Cisco PGW 2200 Softswitch Software Relea se 9.
3-13 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 3 Installing the Cisco PGW 2200 Softswitch Software Release 9.8 and Higher Installing the Cisco PGW 2200 Softswi tch Software Release 9.8 and Higher Releases 4 package pathnames are already properly installed.
3-14 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 3 Installing the Cisco PGW 2200 Softswitch Software Relea se 9.
3-15 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 3 Installing the Cisco PGW 2200 Softswitch Software Release 9.
3-16 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 3 Installing the Cisco PGW 2200 Softswitch Software Relea se 9.
3-17 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 3 Installing the Cisco PGW 2200 Softswitch Software Release 9.
3-18 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 3 Installing the Cisco PGW 2200 Softswitch Software Relea se 9.8 and Higher Installing the Cisco PGW 2200 Softswitch Software Releas e 9.8 and Higher Releases Note Always check cisco.
C HAPTER 4-1 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 4 Configuring the Cisco PGW 2200 Softswitch Software This chapter describe s ho w to configure Release 9.8 of the Cisco PGW 2 200 Softswitch software.
4-2 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 4 Configuring t he Cisco PGW 2200 Softswitch So ftware Before You Start Note For further inf ormation on conf iguring the Cisco PGW 2200 S oftswitch software, see the Cisco PGW 2200 Softswitch Release 9.
4-3 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 4 Configuring th e Cisco PGW 2200 Softswitch Software Before You Start • Hav e your company's internal sup port and Cisco support contact inform ation readily a vailable so you can get help with the installa tion if needed.
4-4 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 4 Configuring t he Cisco PGW 2200 Softswitch So ftware Initial Cisco PGW 2200 Softs witch Software Configuration Initial Cisco PGW 2200 Softswitch Software Configuration The follo wing required configuration parameters in the XECfgP arm.
4-5 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 4 Configuring th e Cisco PGW 2200 Softswitch Software Initial Cisco PGW 2200 Softs witch Soft ware Configuration T able 4-3 sho ws the Cisco PGW 2200 Soft switch configuratio n parameters.
4-6 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 4 Configuring t he Cisco PGW 2200 Softswitch So ftware Initial Cisco PGW 2200 Softs witch Software Configuration *.
4-7 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 4 Configuring th e Cisco PGW 2200 Softswitch Software Initial Cisco PGW 2200 Softs witch S.
4-8 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 4 Configuring t he Cisco PGW 2200 Softswitch So ftware Initial Cisco PGW 2200 Softs witch S.
4-9 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 4 Configuring th e Cisco PGW 2200 Softswitch Software Initial Cisco PGW 2200 Softs witch Soft ware Configuration A dialog box displays , warning that the MGC En vironment Conf iguration T ool is for initial system confi guration only .
4-10 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 4 Configuring t he Cisco PGW 2200 Softswitch So ftware Initial Cisco PGW 2200 Softs witch Software Configuration Step 3 Click the Commit b utton after you hav e fini shed setting the parameters.
4-11 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 4 Configuring th e Cisco PGW 2200 Softswitch Software Configuring Groups and Use rs If you set the Operational Mode to Acti ve/Standb y , the XECfg pro gram displays a prompt that al lo ws you to transf er the XECfgParm.
4-12 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 4 Configuring t he Cisco PGW 2200 Softswitch So ftware Configuring Gr oups and Users # use.
4-13 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 4 Configuring th e Cisco PGW 2200 Softswitch Software Configuring SNMP Support Re sources T ext similar to the follo wing is displayed: Copyright ? 1998-2002, Cisco Systems, Inc.
4-14 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 4 Configuring t he Cisco PGW 2200 Softswitch So ftware Configuring SNMP Supp ort Resources Note SNMP managers su ch as the Ci sco Media G ate way Cont roller Node Manager (Cisco MNM) or HP OpenV ie w can be used to receiv e traps.
4-15 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 4 Configuring th e Cisco PGW 2200 Softswitch Software Configuring SNMP Support Re sources 2. Enter the follo wing commands to restart the snmp daemon: ps -ef |g rep snmpdm The system wil l display the process ID for the snmp daem on.
4-16 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 4 Configuring t he Cisco PGW 2200 Softswitch So ftware Configuring SNMP Supp ort Resources b.
4-17 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 4 Configuring th e Cisco PGW 2200 Softswitch Software Configuring SNMP Support Re sources.
4-18 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 4 Configuring t he Cisco PGW 2200 Softswitch So ftware Configuring SNMP Supp ort Resources.
4-19 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 4 Configuring th e Cisco PGW 2200 Softswitch Software Configuring SNMP Support Re sources.
4-20 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 4 Configuring t he Cisco PGW 2200 Softswitch So ftware Configuring SNMP Supp ort Resources Enter snmpCommunityName: Step 3 Enter an SnmpCommun ityName.
4-21 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 4 Configuring th e Cisco PGW 2200 Softswitch Software Configuring SNMP Support Re sources =================== Add Trap Menu =================== 1.
4-22 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 4 Configuring t he Cisco PGW 2200 Softswitch So ftware Configuring SNMP Supp ort Resources • V erifying the SNMP Conf iguration Migration, page 4-24 The procedure for adding a T rap Destination is now complete.
4-23 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 4 Configuring th e Cisco PGW 2200 Softswitch Software Configuring SNMP Support Re sources Step 5 Enter your selection.
4-24 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 4 Configuring t he Cisco PGW 2200 Softswitch So ftware Configuring SNMP Supp ort Resources.
4-25 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 4 Configuring th e Cisco PGW 2200 Softswitch Software Configuring the Exe cution Environm.
4-26 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 4 Configuring t he Cisco PGW 2200 Softswitch So ftware Configuring the Execution Environment • Initializing the Pro visioning Object Manager , page 4-41 The confi guration data fi le, or XECfgParm.
4-27 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 4 Configuring th e Cisco PGW 2200 Softswitch Software Configuring the Exe cution Environment Note Do not restart the software ye t if you need to conf igure SCP queries or initialize the call screening database.
4-28 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 4 Configuring t he Cisco PGW 2200 Softswitch So ftware Configuring the Execution Environment Ti p If Host X does no t take ov e r call processing after sw itchov er , restart the software on Host Y to take over the calls.
4-29 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 4 Configuring th e Cisco PGW 2200 Softswitch Software Configuring the Exe cution Environment *.ownT ranspathId T o identify t he local Cisco PGW 2200 Softswitch host in a f ault tolerant system, enter th e same valu e that you used for *.
4-30 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 4 Configuring t he Cisco PGW 2200 Softswitch So ftware Configuring the Execution Environment Specifying IP Addresses T o specify IP addresses, modify the following parame ters in the fi rst section of the XECfgP arm.
4-31 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 4 Configuring th e Cisco PGW 2200 Softswitch Software Configuring the Exe cution Environment Note If there are two Ethernet interfaces defined on the Cisco PGW 22 00 Softswitch, it is m andatory to h a ve these on distinct subn ets.
4-32 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 4 Configuring t he Cisco PGW 2200 Softswitch So ftware Configuring the Execution Environment Configuring Engine Parameters For the en gine to run correctly , you must modify the follo wing parameters in the Engine section of the XECfgParm.
4-33 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 4 Configuring th e Cisco PGW 2200 Softswitch Software Configuring the Exe cution Environment engine.SysCdrCollection Designates the format of CDRs.
4-34 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 4 Configuring t he Cisco PGW 2200 Softswitch So ftware Configuring the Execution Environment Setting the Call Cutoff Timer The Cisco PGW 2200 Softswitch call cu toff ti mer is disabled b y default.
4-35 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 4 Configuring th e Cisco PGW 2200 Softswitch Software Configuring the Exe cution Environm.
4-36 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 4 Configuring t he Cisco PGW 2200 Softswitch So ftware Configuring the Execution Environme.
4-37 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 4 Configuring th e Cisco PGW 2200 Softswitch Software Configuring the Exe cution Environment Parameter Modification ClearingL ocation This property o verrides the Clearing Location fi eld in Call Cont ext.
4-38 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 4 Configuring t he Cisco PGW 2200 Softswitch So ftware Configuring the Execution Environment DefaultLocat ion This property ov errides the Defa ult Location f ield in Call Conte xt.
4-39 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 4 Configuring th e Cisco PGW 2200 Softswitch Software Configuring the Exe cution Environment Configuring Switchover T o configure switcho ver , modify the follo wing parameters in the fo ve r d section of the XECfgP arm.
4-40 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 4 Configuring t he Cisco PGW 2200 Softswitch So ftware Configuring the Execution Environment fo verd.
4-41 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 4 Configuring th e Cisco PGW 2200 Softswitch Software Configuring the Exe cution Environment Note For more information on swi tchov er , see the Cisco PGW 2200 Softswitc h Release 9 Operations, Maintenance , and T r oubleshooting Gu ide .
4-42 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 4 Configuring t he Cisco PGW 2200 Softswitch So ftware Configuring SCP Queries Configuring SCP Queries The SCP translates routing information for t he Adva nced Intelligent Netw ork (AIN) database queries ov er TCAP .
4-43 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 4 Configuring th e Cisco PGW 2200 Softswitch Software Configuring SCP Queries • Config uring the trigger .dat File Attributes, pag e 4-43 • Sample trigger .
4-44 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 4 Configuring t he Cisco PGW 2200 Softswitch So ftware Configuring SCP Queries Configuring.
4-45 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 4 Configuring th e Cisco PGW 2200 Softswitch Software Configuring SCP Queries T able 4-6 $Message Sending T able V alues Sample trigger.
4-46 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 4 Configuring t he Cisco PGW 2200 Softswitch So ftware Configuring SCP Queries #----------.
4-47 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 4 Configuring th e Cisco PGW 2200 Softswitch Software Configuring SCP Queries 7 14 10 16 .
4-48 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 4 Configuring t he Cisco PGW 2200 Softswitch So ftware Configuring SCP Queries #----------.
4-49 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 4 Configuring th e Cisco PGW 2200 Softswitch Software Configuring SCP Queries 3 0 0 0 0 0.
4-50 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 4 Configuring t he Cisco PGW 2200 Softswitch So ftware Configuring SCP Queries inap-lnp-no.
4-51 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 4 Configuring th e Cisco PGW 2200 Softswitch Software Configuring SCP Queries #----------.
4-52 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 4 Configuring t he Cisco PGW 2200 Softswitch So ftware Configuring SCP Queries #----------.
4-53 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 4 Configuring th e Cisco PGW 2200 Softswitch Software Configuring SCP Queries #----------.
4-54 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 4 Configuring t he Cisco PGW 2200 Softswitch So ftware Configuring SCP Queries #----------.
4-55 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 4 Configuring th e Cisco PGW 2200 Softswitch Software Configuring SCP Queries #----------.
4-56 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 4 Configuring t he Cisco PGW 2200 Softswitch So ftware Configuring SCP Queries #----------.
4-57 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 4 Configuring th e Cisco PGW 2200 Softswitch Software Configuring SCP Queries # PS 1: Cus.
4-58 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 4 Configuring t he Cisco PGW 2200 Softswitch So ftware Configuring SCP Queries # PS 9: INA.
4-59 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 4 Configuring th e Cisco PGW 2200 Softswitch Software Configuring SCP Queries # PS 17: IN.
4-60 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 4 Configuring t he Cisco PGW 2200 Softswitch So ftware Configuring SCP Queries #----------.
4-61 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 4 Configuring th e Cisco PGW 2200 Softswitch Software Configuring SCP Queries #----------.
4-62 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 4 Configuring t he Cisco PGW 2200 Softswitch So ftware Configuring SCP Queries # RR 24: IN.
4-63 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 4 Configuring th e Cisco PGW 2200 Softswitch Software Configuring SCP Queries #----------.
4-64 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 4 Configuring t he Cisco PGW 2200 Softswitch So ftware Configuring SCP Queries # # F1 F2 F.
4-65 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 4 Configuring th e Cisco PGW 2200 Softswitch Software Configuring SCP Queries # MR 8: CS1.
4-66 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 4 Configuring t he Cisco PGW 2200 Softswitch So ftware Configuring SCP Queries #----------.
4-67 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 4 Configuring th e Cisco PGW 2200 Softswitch Software Configuring SCP Queries #----------.
4-68 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 4 Configuring t he Cisco PGW 2200 Softswitch So ftware Configuring SCP Queries ###########.
4-69 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 4 Configuring th e Cisco PGW 2200 Softswitch Software Configuring SCP Queries #----------.
4-70 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 4 Configuring t he Cisco PGW 2200 Softswitch So ftware Configuring SCP Queries #----------.
4-71 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 4 Configuring th e Cisco PGW 2200 Softswitch Software Configuring SCP Queries # component.
4-72 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 4 Configuring t he Cisco PGW 2200 Softswitch So ftware Configuring SCP Queries 205 1 1 206.
4-73 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 4 Configuring th e Cisco PGW 2200 Softswitch Software Configuring SCP Queries #----------.
4-74 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 4 Configuring t he Cisco PGW 2200 Softswitch So ftware Configuring SCP Queries #----------.
4-75 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 4 Configuring th e Cisco PGW 2200 Softswitch Software Configuring SCP Queries 211 1 1 212.
4-76 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 4 Configuring t he Cisco PGW 2200 Softswitch So ftware Configuring SCP Queries # Parameter.
4-77 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 4 Configuring th e Cisco PGW 2200 Softswitch Software Configuring SCP Queries 239 1 1 240.
4-78 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 4 Configuring t he Cisco PGW 2200 Softswitch So ftware Configuring SCP Queries #----------.
4-79 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 4 Configuring th e Cisco PGW 2200 Softswitch Software Configuring SCP Queries # RA 15: IN.
4-80 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 4 Configuring t he Cisco PGW 2200 Softswitch So ftware Configuring SCP Queries #----------.
4-81 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 4 Configuring th e Cisco PGW 2200 Softswitch Software Configuring SCP Queries #----------.
4-82 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 4 Configuring t he Cisco PGW 2200 Softswitch So ftware Initializing the Call Screening Dat.
4-83 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 4 Configuring th e Cisco PGW 2200 Softswitch Software Initializing the Call Screening Dat.
4-84 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 4 Configuring t he Cisco PGW 2200 Softswitch So ftware Initializing the Call Screening Database Network Requirements In most replication schemes, you need to identif y the name of the host machine on which your data store resides.
4-85 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 4 Configuring th e Cisco PGW 2200 Softswitch Software Initializing the Call Screening Database 192.168.11.2 UK-A-Netra1125-2 192.168.12.2 UK-A-Netra1125-2.
4-86 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 4 Configuring t he Cisco PGW 2200 Softswitch So ftware Initializing the Call Screening Database where activehost is the name (not IP address) of your acti ve host.
4-87 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 4 Configuring th e Cisco PGW 2200 Softswitch Software Initializing the Call Screening Database Step 5 Enter the numan-rtrv MML command to verify that the entry you added in Step 4 was replic ated to the database on the standby h ost.
4-88 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 4 Configuring t he Cisco PGW 2200 Softswitch So ftware Initializing the Call Screening Database % ./db_count.sh The output sho ws the ro ws counted in each database table: Counting the rows in each database table.
4-89 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 4 Configuring th e Cisco PGW 2200 Softswitch Software Configuring Cisco ITP-Ls Step 2 Check the log f i le for installat ion errors. (The log f ile is in the directory /v ar/adm/MGC_install.
4-90 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 4 Configuring t he Cisco PGW 2200 Softswitch So ftware Configuring the Data Dumper Step 4 T o change the percentage of disk usag e at which alarming and disk t rimming is initiat ed, modify the v alue of the diskmonitor .
4-91 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 4 Configuring th e Cisco PGW 2200 Softswitch Software Configuring th e Data Dumper T o configu re the dmprSink.
4-92 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 4 Configuring t he Cisco PGW 2200 Softswitch So ftware Configuring the Data Du mper to Support Cisco BAMS Step 8 Stop and start the ne wly-standby host ( formerly acti ve host).
C HAPTER 5-1 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 5 Migrating to Solaris 10 and Cisco PGW 2200 Softswitch Software Release 9.8 This chapter describes ho w to migrate your Cisco PGW 2200 Softswit ch to the Solaris 10 operat ing system and Cisco PGW 2200 Softswitch software Release 9.
5-2 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 5 Migrating to So laris 10 and Cisco PGW 2200 Softswitch So ftware Release 9.8 Cautions and N otes • The disks in the system must be at least 18 GB in size.
5-3 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 5 Migrating to Solaris 10 and Cisco PGW 2200 So ftswitch Software Release 9.8 Required Software Note The Cisco PGW 2200 Softswitch supports a li ve upgrade from the Sparc-based platforms to the Opteron-based platfor ms.
5-4 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 5 Migrating to So laris 10 and Cisco PGW 2200 Softswitch So ftware Release 9.8 Migration Overview • /etc/in et/hosts • /etc/in et/netmasks • /etc/inet/ntp.
5-5 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 5 Migrating to Solaris 10 and Cisco PGW 2200 So ftswitch Software Release 9.8 Migration from Release 9.5 or 9.6 to Release 9.8 withou t Platform Changes Migration from Release 9.
5-6 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 5 Migrating to So laris 10 and Cisco PGW 2200 Softswitch So ftware Release 9.8 Migration fro m Release 9.5 or 9.6 to Releas e 9.8 with out Platform Changes % sudo /etc/init.
5-7 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 5 Migrating to Solaris 10 and Cisco PGW 2200 So ftswitch Software Release 9.
5-8 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 5 Migrating to So laris 10 and Cisco PGW 2200 Softswitch So ftware Release 9.
5-9 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 5 Migrating to Solaris 10 and Cisco PGW 2200 So ftswitch Software Release 9.
5-10 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 5 Migrating to So laris 10 and Cisco PGW 2200 Softswitch So ftware Release 9.
5-11 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 5 Migrating to Solaris 10 and Cisco PGW 2200 So ftswitch Software Release 9.
5-12 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 5 Migrating to So laris 10 and Cisco PGW 2200 Softswitch So ftware Release 9.
5-13 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 5 Migrating to Solaris 10 and Cisco PGW 2200 So ftswitch Software Release 9.8 Migration from Release 9.5 or 9.6 to Release 9.8 withou t Platform Changes Step 11 V erify that configu ration files were successfu lly backed up.
5-14 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 5 Migrating to So laris 10 and Cisco PGW 2200 Softswitch So ftware Release 9.
5-15 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 5 Migrating to Solaris 10 and Cisco PGW 2200 So ftswitch Software Release 9.
5-16 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 5 Migrating to So laris 10 and Cisco PGW 2200 Softswitch So ftware Release 9.
5-17 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 5 Migrating to Solaris 10 and Cisco PGW 2200 So ftswitch Software Release 9.8 Migration from Release 9.5 or 9.6 to Release 9.8 withou t Platform Changes 4.
5-18 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 5 Migrating to So laris 10 and Cisco PGW 2200 Softswitch So ftware Release 9.8 Migration fro m Release 9.5 or 9.6 to Releas e 9.8 with out Platform Changes mml> rtrv-iplnk:all c.
5-19 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 5 Migrating to Solaris 10 and Cisco PGW 2200 So ftswitch Software Release 9.8 Migration from Release 9.5 or 9.6 to Release 9.8 withou t Platform Changes migration completed successfully ***finish checking migration.
5-20 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 5 Migrating to So laris 10 and Cisco PGW 2200 Softswitch So ftware Release 9.
5-21 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 5 Migrating to Solaris 10 and Cisco PGW 2200 So ftswitch Software Release 9.
5-22 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 5 Migrating to So laris 10 and Cisco PGW 2200 Softswitch So ftware Release 9.8 Upgrading Lively fr om Sparc-base d Platforms to Opteron-based Platforms Note No provi sioning is allo wed during the li ve upgrade.
5-23 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 5 Migrating to Solaris 10 and Cisco PGW 2200 So ftswitch Software Release 9.8 Upgrading Lively from Sparc-based Platforms to Opteron-base d Platforms Step 4 Use ftp utility to tran sfer MGC.
5-24 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 5 Migrating to So laris 10 and Cisco PGW 2200 Softswitch So ftware Release 9.
5-25 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 5 Migrating to Solaris 10 and Cisco PGW 2200 So ftswitch Software Release 9.8 Upgrading Lively from Sparc-based Platforms to Opteron-base d Platforms CISCO.
5-26 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 5 Migrating to So laris 10 and Cisco PGW 2200 Softswitch So ftware Release 9.8 Falling Back Overview Falling Back Overview Cisco PGW 2200 Softswitch suppor ts both Sparc-base d and Opteron-based platforms on Release 9.
5-27 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 5 Migrating to Solaris 10 and Cisco PGW 2200 So ftswitch Software Release 9.8 Falling Back to Solaris 8 and Cisco PGW 2200 Softswitch Release 9.
5-28 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 5 Migrating to So laris 10 and Cisco PGW 2200 Softswitch So ftware Release 9.8 Falling Back to Solaris 8 and Cisco PGW 2200 Softswitch Release 9.
5-29 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 5 Migrating to Solaris 10 and Cisco PGW 2200 So ftswitch Software Release 9.8 Falling Back to Solaris 8 and Cisco PGW 2200 Softswitch Release 9.
5-30 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 5 Migrating to So laris 10 and Cisco PGW 2200 Softswitch So ftware Release 9.8 Falling Back to Solaris 8 and Cisco PGW 2200 Softswitch Release 9.
5-31 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 5 Migrating to Solaris 10 and Cisco PGW 2200 So ftswitch Software Release 9.8 Falling Back to Solaris 8 and Cisco PGW 2200 Softswitch Release 9.
5-32 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 5 Migrating to So laris 10 and Cisco PGW 2200 Softswitch So ftware Release 9.
5-33 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 5 Migrating to Solaris 10 and Cisco PGW 2200 So ftswitch Software Release 9.8 Replacing Hard Disks on an Existing Solaris 10 Pla tform # /etc/init.
5-34 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 5 Migrating to So laris 10 and Cisco PGW 2200 Softswitch So ftware Release 9.
5-35 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 Chapter 5 Migrating to Solaris 10 and Cisco PGW 2200 So ftswitch Software Release 9.8 Replacing Hard Disks on an Existing Solaris 10 Pla tform Caution Be sure to follo w the appropriate anti-static procedures when performing this p rocedure.
5-36 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 5 Migrating to So laris 10 and Cisco PGW 2200 Softswitch So ftware Release 9.
C HAPTER 6-1 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuratio n Guide OL-18083-01 6 Configuring the Local Area Network Switch This chapter pro vides a brief ov erview of the local area n etwork (LAN) switches (Cisco Catalyst Switch family) in your solution.
6-2 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Chapter 6 Configuring the Lo cal Area Network Switch Catalyst 2900 XL Series Catalyst 2900 XL Series See the follo wing web sites for hardware and software documentation for the Ca talyst 2900 XL seri es: http://www .
A-1 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-01 APPENDIX A XECfgParm.dat File Parameters This appendix describes the parameters found in the XECfgParm.dat f ile for the Cisco PGW 2200 Softswitch softw are Release 9.
A-2 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Appendix A XECfgParm.da t File Parameters Understanding the XECfgParm.
A-3 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-01 Appendix A XECfgParm.dat File Para meters Understanding the XECfg Parm.dat File Format T able A -1 Cisco PGW 2200 Softswitch 9.x XECfgP arm.dat File Configur ation P aramet ers Configuration Parameter Definition *.
A-4 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Appendix A XECfgParm.da t File Parameters Understanding the XECfgParm.
A-5 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-01 Appendix A XECfgParm.dat File Para meters Understanding the XECfg Parm.dat File Format *.CustSpecif icIN APHandling Controls IN AP (Intelligent Network Applicati on Protocol) beha vior , including advertised applicatio n context.
A-6 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Appendix A XECfgParm.da t File Parameters Understanding the XECfgParm.dat File Format *.DefaultLocation Specifies whether to ove rride the default lo cation field in the call context d ata for calls released by the Cisco PGW 2200 Softswitch.
A-7 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-01 Appendix A XECfgParm.dat File Para meters Understanding the XECfg Parm.dat File Format *.DisableCCBSov erT unneledQSIG Specif ies the protocol used to deli ver Call Back Services messages ov er the network.
A-8 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Appendix A XECfgParm.da t File Parameters Understanding the XECfgParm.dat File Format *.GWClearChannelAlgorithm Allo ws the use of the clear channel 64 K unrestrict ed data transfer between g atew a ys.
A-9 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-01 Appendix A XECfgParm.dat File Para meters Understanding the XECfg Parm.dat File Format *.ipAddrLocalB Second local IP address; used for checkpointi ng and failo ver heartbeats if you have acti ve/standby Cisco PGW 2200 Softswitch hosts.
A-10 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Appendix A XECfgParm.da t File Parameters Understanding the XECfgParm.dat File Format *.LISupport Enables Cisco PGW 2200 Softswitch to be used for La wful Intercept.
A-11 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-01 Appendix A XECfgParm.dat File Para meters Understanding the XECfg Parm.dat File Format *.logPrio Def ines the initial defau lt logging le vel used by loggi ng clients when sending messages to the logging server .
A-12 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Appendix A XECfgParm.da t File Parameters Understanding the XECfgParm.dat File Format *.logPrio ( continued) • Critical —These messages indicate errors so sev ere tha t a process cannot continue operati ng.
A-13 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-01 Appendix A XECfgParm.dat File Para meters Understanding the XECfg Parm.dat File Format *.maxLocationLabels (Added in Release 9.6(1) Specif ies the maximum numbe r of location labels that can be provisioned.
A-14 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Appendix A XECfgParm.da t File Parameters Understanding the XECfgParm.dat File Format *.MMLManualBlockingCic Allo ws the Cisco PGW 2200 Softswitch to manuall y block channels that do not respond to Release, Restart, or Disconnect messages.
A-15 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-01 Appendix A XECfgParm.dat File Para meters Understanding the XECfg Parm.dat File Format *.OwnClli Common language locatio n identif ier; used for circuit query v alidation when ci rcuit queries are supported.
A-16 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Appendix A XECfgParm.da t File Parameters Understanding the XECfgParm.dat File Format *.RedirectingA T ree Used to control A- number screening/analysis via A-dig it tree.
A-17 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-01 Appendix A XECfgParm.dat File Para meters Understanding the XECfg Parm.
A-18 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Appendix A XECfgParm.da t File Parameters Understanding the XECfgParm.dat File Format *.SU A.maxOPCs Def ines the maximum number of SU A OPCs. Va l u e : 64 Note Do not change this v alue.
A-19 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-01 Appendix A XECfgParm.dat File Para meters Understanding the XECfg Parm.dat File Format *.tablesFile Location of the database d irectories. Default: .
A-20 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Appendix A XECfgParm.da t File Parameters Understanding the XECfgParm.dat File Format *.VSCNetwo rkPlacement Determines Cisco PGW 2200 Softswitch placement (A T or IXC) and bias r outing accordingly .
A-21 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-01 Appendix A XECfgParm.dat File Para meters Understanding the XECfg Parm.dat File Format diskmonitor .CdrRmFinished Specif ies the number of days to keep f inished CDR file s.
A-22 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Appendix A XECfgParm.da t File Parameters Understanding the XECfgParm.dat File Format diskmonitor .DailyStartT ime Specif ies the time that the disk mo nitor is run each day to remov e files that are older than th e va lue set in diskmonitor .
A-23 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-01 Appendix A XECfgParm.dat File Para meters Understanding the XECfg Parm.dat File Format diskmonitor .PreserveLogs Specif ies, alon g with diskmonito r .
A-24 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Appendix A XECfgParm.da t File Parameters Understanding the XECfgParm.dat File Format diskmonitor .Threshold Erases old log files to free di sk space.
A-25 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-01 Appendix A XECfgParm.dat File Para meters Understanding the XECfg Parm.dat File Format engine.CallLimitingCo ntrol (added in Release 9.6(1) Allo ws enabling or disabling the call l imiting capability on the Cisco PG W 2200 Softswit ch.
A-26 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Appendix A XECfgParm.da t File Parameters Understanding the XECfgParm.
A-27 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-01 Appendix A XECfgParm.dat File Para meters Understanding the XECfg Parm.dat File Format engine.RelIN APCallsAfterSw Over Defines the trea tment of IN AP calls in answer state after platform switchov e r .
A-28 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Appendix A XECfgParm.da t File Parameters Understanding the XECfgParm.dat File Format engine.ShortDurationCallPeriod Allo ws you to sp ecify the period used to determine a short duration call.
A-29 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-01 Appendix A XECfgParm.dat File Para meters Understanding the XECfg Parm.
A-30 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Appendix A XECfgParm.da t File Parameters Understanding the XECfgParm.dat File Format engine.SysMdlMemoryReduction Controls use of MDL memory reductions.
A-31 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-01 Appendix A XECfgParm.dat File Para meters Understanding the XECfg Parm.dat File Format engine.SysSGCPREtryT imerInterval The interv al between SGCP message tran smissions, in milliseconds.
A-32 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Appendix A XECfgParm.da t File Parameters Understanding the XECfgParm.dat File Format fo verd.abswitchPort Port used for communication with the A/B switch.
A-33 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-01 Appendix A XECfgParm.dat File Para meters Understanding the XECfg Parm.
A-34 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Appendix A XECfgParm.da t File Parameters Understanding the XECfgParm.
A-35 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-01 Appendix A XECfgParm.dat File Para meters Understanding the XECfg Parm.dat File Format GWNetworkContin uity F or network continuity test on VI SM. V alid values: 1 —Network continuity is present/requested.
A-36 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Appendix A XECfgParm.da t File Parameters Understanding the XECfgParm.
A-37 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-01 Appendix A XECfgParm.dat File Para meters Understanding the XECfg Parm.dat File Format logger .f ileRotateInterv al T riggers a file rota tion based on the t ime elapsed since the pre vious rotation.
A-38 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Appendix A XECfgParm.da t File Parameters Understanding the XECfgParm.dat File Format MgcHeaderA ddrT ype Sets the Cisco PGW 2200 Softswitch H.248 lo cal MID address type.
A-39 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-01 Appendix A XECfgParm.dat File Para meters Understanding the XECfg Parm.dat File Format pom.dataSync Indicates that the Pro visioning Object Manager (POM) should sync hronize the provisioni ng data at startu p.
A-40 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Appendix A XECfgParm.da t File Parameters Understanding the XECfgParm.dat File Format procM.lo gDBFile Specif ies the location of the log lev el storage.
A-41 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-01 Appendix A XECfgParm.dat File Para meters Understanding the XECfg Parm.dat File Format RadiusAccounting.smSize The size of shared mem ory in MB. V alue: Any inte ger from 1 to 199.
A-42 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Appendix A XECfgParm.da t File Parameters Understanding the XECfgParm.dat File Format SIP .Conn_Idle_Period Def ines the length of ti me (in seconds) that a TCP connection can remain idle before the Cisco PGW 2200 Softswitch closes the connectio n.
A-43 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-01 Appendix A XECfgParm.dat File Para meters Understanding the XECfg Parm.
A-44 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Appendix A XECfgParm.da t File Parameters Understanding the XECfgParm.dat File Format SIP .T ransportPr otocol (Obsolete in Release 9.8(1), u sed for software migrati on only) Defin es the transport protocol used to compl ete calls.
A-45 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-01 Appendix A XECfgParm.dat File Para meters Understanding the XECfg Parm.dat File Format SipT oIsupInterworkingInd Only applicable with SI P to ISUP (or ISUP to SIP) calls.
A-46 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Appendix A XECfgParm.da t File Parameters Understanding the XECfgParm.dat File Format TCAP .avgIn v okePerDialog Sets the av erage nu mber of Inv okes for a TCAP dialog.
B-1 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-01 APPENDIX B Client/Server and S ecure Connectivity Relationships This appendix describes the client/server and secure connecti vity relationships used among the dif ferent applications of the Cisco PGW 2200 Softswitch, Cisco B A MS, and Cisco HSI.
B-2 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Appendix B Client/Server and Secure Connectivity Relationships Client/Server an d Secure Connectivity Relationships Note For simplici ty , redundant p latforms are not sho wn in this fi gure.
B-3 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-01 Appendix B Client/Server and Secure Connectivity Relations hips Client/Server an d Secure Connectiv.
B-4 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Appendix B Client/Server and Secure Connectivity Relationships Client/Server an d Secure Connectivi.
C-1 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-01 APPENDIX C HP OpenView Sample SNMP Configuration Configuring the Cisco PGW 2200 Softswitch to Send Alarms to HP OpenView This sample conf iguration sets up a Cisco PGW 2200 Softswitch to send alarms to HP OpenV ie w .
C-2 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Appendix C HP Op enView Sample SNMP Configuration Configuring the Cisco PGW 2200 Softs witch to Send Alarms to HP OpenView Step 10 Click Set . Y ou should see a dia log box indicati ng that the values are entered successfully .
C-3 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-01 Appendix C HP OpenView Sample SNMP Configuration Formatting Trap Message s Ti p Y ou can v erify the settings b y selecting each MIB OID and clicking Start Query .
C-4 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Appendix C HP Op enView Sample SNMP Configuration Formatting Trap Messages Follo wing is an example.
D-1 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-01 APPENDIX D Sample Installation Scripts This appendix contain s sample outputs from the follo wing: • Sample Output from instal l.sh, page D-1 • Updated Conf iguration File Sample, page D-1 1 • Sample Conf igured snmpd.
D-2 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Appendix D Sample Installation Scripts Sample Output from install.sh Enter CiscoMGC UID [20000] Enter CiscoMGC group name [mgcgrp] Enter CiscoMGC GID [20000] [mgcgrp] group added [mgcusr] user added Modifying /etc/init.
D-3 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-01 Appendix D Samp le Installation Scripts Sample Out put from insta ll.sh Installing libACE.so Installing libbtsUtil.so Installing libcmg.so Installing libconvutil.
D-4 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Appendix D Sample Installation Scripts Sample Output from install.sh Preparing to install TimesTen in /opt on va-redskins Executing TimesTen installation script.
D-5 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-01 Appendix D Samp le Installation Scripts Sample Out put from insta ll.sh Installation of <CSCOga002> was successful. Updating parameters for critagt.
D-6 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Appendix D Sample Installation Scripts Sample Output from install.
D-7 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-01 Appendix D Samp le Installation Scripts Sample Out put from insta ll.
D-8 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Appendix D Sample Installation Scripts Sample Output from install.sh Uncompressing dummy.so Uncompressing lcm.mdo Uncompressing lcm.so Installation of <CSCO00000> was successful.
D-9 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-01 Appendix D Samp le Installation Scripts Sample Out put from insta ll.sh Uncompressing Q761_AUSTRL.so Uncompressing Q761_AUSTRL_C2.mdo Uncompressing Q761_AUSTRL_C2.
D-10 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Appendix D Sample Installation Scripts Sample Output from install.sh Uncompressing ISUPV2_FINNISH96.so Uncompressing ISUPV2_FRENCH.mdo Uncompressing ISUPV2_FRENCH.
D-11 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-01 Appendix D Samp le Installation Scripts Upda ted Config ur ation File Sample Uncompressing Q767_BASE.so Uncompressing Q767_BRAZIL.mdo Uncompressing Q767_BRAZIL.
D-12 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Appendix D Sample Installation Scripts Updated Configur ation File Sample #---------------- MGC Environment Configuration Tool Usage -------------------- # REQUIRED STARTUP PARAMETERS # DO NOT MOVE THESE PARAMETERS BEYOND THIS BOX *.
D-13 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-01 Appendix D Samp le Installation Scripts Sample Conf igured snmpd. cnf File # Improved SIP Failover Support. Setting 0.0.0.0 to both will disable # the SIP Improved failover support Feature.
D-14 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Appendix D Sample Installation Scripts Sample Configured snmpd.
D-15 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-01 Appendix D Samp le Installation Scripts Sample Conf igured snmpd.
D-16 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Appendix D Sample Installation Scripts Sample Configured XECfgP arm.
D-17 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-01 Appendix D Samp le Installation Scripts Sample Configured XECfgParm.dat Files for Cisco PGW 2200 Softswitch Release 9.8(1) # Copyright (c) 1997-2008 by Cisco Systems, Inc.
D-18 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Appendix D Sample Installation Scripts Sample Configured XECfgP arm.dat Files for Cisco PGW 2200 Softswitch Release 9.8(1) # are different on the two MGC hosts *.
D-19 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-01 Appendix D Samp le Installation Scripts Sample Configured XECfgParm.
D-20 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Appendix D Sample Installation Scripts Sample Configured XECfgP arm.dat Files for Cisco PGW 2200 Softswitch Release 9.8(1) *.PNPopulate = disable # disable/enable *.
D-21 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-01 Appendix D Samp le Installation Scripts Sample Configured XECfgParm.dat Files for Cisco PGW 2200 Softswitch Release 9.8(1) # engine.logPrio = Debug # foverd.
D-22 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Appendix D Sample Installation Scripts Sample Configured XECfgP arm.dat Files for Cisco PGW 2200 Softswitch Release 9.8(1) engine.SysMaxOverlap = 28 engine.
D-23 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-01 Appendix D Samp le Installation Scripts Sample Configured XECfgParm.dat Files for Cisco PGW 2200 Softswitch Release 9.8(1) #---------------------- cdrDmpr.
D-24 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Appendix D Sample Installation Scripts Sample Configured XECfgP arm.dat Files for Cisco PGW 2200 Softswitch Release 9.8(1) SIP.connLocalMsgQueueSize = 1500 # Maximum number of local outgoing messsages per TCP connection queue SIP.
D-25 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-01 Appendix D Samp le Installation Scripts Sample Configured XECfgParm.dat Files for Cisco PGW 2200 Softswitch Release 9.8(1) # connection 1 parameters foverd.
D-26 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Appendix D Sample Installation Scripts Sample Configured XECfgP arm.
D-27 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-01 Appendix D Samp le Installation Scripts Sample Configured XECfgParm.dat Files for Cisco PGW 2200 Softswitch Release 9.7(3) H248.localMID = 0.0.0.0 # MGC Message Identifier.
D-28 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Appendix D Sample Installation Scripts Sample Configured XECfgP arm.
D-29 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-01 Appendix D Samp le Installation Scripts Sample Configured XECfgParm.dat Files for Cisco PGW 2200 Softswitch Release 9.7(3) # Set *.sipFailover = true # MIGRATED # *.
D-30 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Appendix D Sample Installation Scripts Sample Configured XECfgP arm.dat Files for Cisco PGW 2200 Softswitch Release 9.7(3) M3UA.maxOPCs = 64 # Max number of M3UA OPCs M3UA.
D-31 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-01 Appendix D Samp le Installation Scripts Sample Configured XECfgParm.dat Files for Cisco PGW 2200 Softswitch Release 9.7(3) # unix filename of the process must be used.
D-32 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Appendix D Sample Installation Scripts Sample Configured XECfgP arm.dat Files for Cisco PGW 2200 Softswitch Release 9.7(3) #------------- # Engine #------------- engine.
D-33 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-01 Appendix D Samp le Installation Scripts Sample Configured XECfgParm.dat Files for Cisco PGW 2200 Softswitch Release 9.7(3) engine.ChargingMode = 1 # MIGRATED engine.
D-34 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Appendix D Sample Installation Scripts Sample Configured XECfgP arm.dat Files for Cisco PGW 2200 Softswitch Release 9.7(3) # measM #----------- # # Currently we assume 8000 XEMeas objects fit into 8 Mb of shared memory.
D-35 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-01 Appendix D Samp le Installation Scripts Sample Configured XECfgParm.dat Files for Cisco PGW 2200 Softswitch Release 9.7(3) foverd.conn3Type = serial foverd.
D-36 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Appendix D Sample Installation Scripts Sample Configured XECfgP arm.dat Files for Cisco PGW 2200 Softswitch Release 9.7(3) diskmonitor.Limit = 7 # MIGRATED diskmonitor.
D-37 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-01 Appendix D Samp le Installation Scripts Sample Configured XECfgParm.dat Files for Cisco PGW 2200 Softswitch Release 9.6(1) # Default value: 0 Sample Configured XECfgParm.
D-38 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Appendix D Sample Installation Scripts Sample Configured XECfgP arm.dat Files for Cisco PGW 2200 Softswitch Release 9.6(1) *.desiredPlatformState = master *.
D-39 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-01 Appendix D Samp le Installation Scripts Sample Configured XECfgParm.
D-40 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Appendix D Sample Installation Scripts Sample Configured XECfgP arm.
D-41 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-01 Appendix D Samp le Installation Scripts Sample Configured XECfgParm.dat Files for Cisco PGW 2200 Softswitch Release 9.6(1) # Specialized "autonomous" flags for debug, fault isolation # engine.
D-42 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Appendix D Sample Installation Scripts Sample Configured XECfgP arm.dat Files for Cisco PGW 2200 Softswitch Release 9.6(1) *.SelectTermCustGrpId = 0 # 1= Select Terminating SigPath CustGrpId if Originating SigPath CustGrpId is 0000.
D-43 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-01 Appendix D Samp le Installation Scripts Sample Configured XECfgParm.dat Files for Cisco PGW 2200 Softswitch Release 9.6(1) # evtTimer(msec.) - Frequency at which the queue is scanned for Msgs.
D-44 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Appendix D Sample Installation Scripts Sample Configured XECfgP arm.dat Files for Cisco PGW 2200 Softswitch Release 9.6(1) # (verb all lowercase) MML.
D-45 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-01 Appendix D Samp le Installation Scripts Sample Configured XECfgParm.dat Files for Cisco PGW 2200 Softswitch Release 9.6(1) replicator.portDataChannelRecv = 2970 replicator.
D-46 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Appendix D Sample Installation Scripts Sample Configured XECfgP arm.dat Files for Cisco PGW 2200 Softswitch Release 9.6(1) MML.rtrv-callinfo = 30000 *.
E-1 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-01 APPENDIX E Sample Uninstall Scripts This appendix contain s sample outputs from the follo wing section, Removing a Cisco PGW 2200 Softswitch Software V ersion: Sample Output for uninstall.
E-2 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Appendix E Sample Uninstall Scripts Removing a Cisco PGW 2200 Softswitch Softwar e Version: Sample Ou tput for uninstall.s h Removing /opt/CiscoMGC/etc/migrate/migrate_7.
E-3 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-01 Appendix E Sa mple Uninstall Scripts Removing a Cisco PGW 2200 Softswitch Softwar e Version: Sample Outp ut for uninstall.sh Removing /opt/CiscoMGC/etc/CONFIG_LIB/5.
E-4 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Appendix E Sample Uninstall Scripts Removing a Cisco PGW 2200 Softswitch Softwar e Version: Sample Ou tput for uninstall.s h Removing /opt/CiscoMGC/etc/CONFIG_LIB/7.
E-5 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-01 Appendix E Sa mple Uninstall Scripts Removing a Cisco PGW 2200 Softswitch Softwar e Version: Sample Outp ut for uninstall.sh Removing /opt/CiscoMGC/etc/CONFIG_LIB/9.
E-6 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Appendix E Sample Uninstall Scripts Removing a Cisco PGW 2200 Softswitch Softwar e Version: Sample Ou tput for uninstall.s h Saving rows... 0/0 rows saved.
E-7 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-01 Appendix E Sa mple Uninstall Scripts Removing a Cisco PGW 2200 Softswitch Softwar e Version: Sample Outp ut for uninstall.sh Table successfully saved.
E-8 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Appendix E Sample Uninstall Scripts Removing a Cisco PGW 2200 Softswitch Softwar e Version: Sample Ou tput for uninstall.s h Removal of <CSCO00000> was successful.
F-1 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-01 APPENDIX F Sample LAN Configurations This appendix contains sample conf igurations for two LAN switches, Cisco Catalyst 5500 A and Cisco Catalyst 55 00 B, and the route s witch modules.
F-2 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Appendix F Sample LAN Configurations Sample Configuration for Cisco Cataly st 5500 A set snmp trap .
F-3 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-01 Appendix F Sample LAN Configurations Sample Configuration for Cisco Catalyst 5500 A e bridge 0x0 st.
F-4 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Appendix F Sample LAN Configurations Sample Configuration for Cisco Cataly st 5500 A set logging le.
F-5 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-01 Appendix F Sample LAN Configurations Sample Configuration for Cisco Catalyst 5500 A set port enable.
F-6 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Appendix F Sample LAN Configurations Sample Configuration for Cisco Cataly st 5500 A set port proto.
F-7 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-01 Appendix F Sample LAN Configurations Sample Configuration for Cisco Catalyst 5500 A set spantree po.
F-8 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Appendix F Sample LAN Configurations Sample Configuration for Cisco Cataly st 5500 B hostname Catalyst_5513A_RSM ! enable password cisco ! no ip domain-lookup ! ! ! interface Vlan2 ip address 209.
F-9 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-01 Appendix F Sample LAN Configurations Sample Configuration for Cisco Catalyst 5500 B Catalyst_5513B (enable) show config Output similar to the follo wing appears: begin ! #version 4.
F-10 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Appendix F Sample LAN Configurations Sample Configuration for Cisco Cataly st 5500 B ! #dns set ip.
F-11 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-01 Appendix F Sample LAN Configurations Sample Configuration for Cisco Catalyst 5500 B set spantree m.
F-12 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Appendix F Sample LAN Configurations Sample Configuration for Cisco Cataly st 5500 B clear timezone set summertime disable ! #set boot command set boot config-register 0x2 set boot system flash bootflash:cat5000-sup3.
F-13 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-01 Appendix F Sample LAN Configurations Sample Configuration for Cisco Catalyst 5500 B set port duple.
F-14 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Appendix F Sample LAN Configurations Sample Configuration for Cisco Cataly st 5500 B set cdp inter.
F-15 Cisco PGW 2200 Softswitch Release 9.8 Softwar e Installation and Configuration Guide OL-18083-01 Appendix F Sample LAN Configurations Sample Configuration for Cisco Catalyst 5500 B set spantree p.
F-16 Cisco PGW 2200 Softswitch Release 9.8 Softw are Installation and Configuration Guide OL-18083-01 Appendix F Sample LAN Configurations Sample Configuration for Cisco Cataly st 5500 B standby 4 preempt standby 4 authentication VSC3000 standby 4 ip 209.
Een belangrijk punt na aankoop van elk apparaat Cisco Systems PGW 2200 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Cisco Systems PGW 2200 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Cisco Systems PGW 2200 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Cisco Systems PGW 2200 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Cisco Systems PGW 2200 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Cisco Systems PGW 2200 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Cisco Systems PGW 2200 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Cisco Systems PGW 2200 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.