Gebruiksaanwijzing /service van het product WSC4500XF16SFP van de fabrikant Cisco Systems
Ga naar pagina of 194
Corporate Headquarters Cisco S yste ms, Inc . 170 W est Tasma n Drive San Jose , CA 95134 -1706 USA http://ww w.cisco. com Tel: 408 526-400 0 800 55 3-N ETS ( 6387 ) Fax: 408 526- 4100 Catalyst 450 0 .
THE SPECIFICA TIONS AND INFORMA TIO N REGARDING THE PR ODUCTS IN THIS MANUAL ARE SUBJECT TO CHANGE WITHOUT NOTI CE. ALL ST A TEMENTS, INFORMA TION, AND RECOMMENDA TIONS IN THIS MANUAL ARE B ELIEVED TO BE ACCURA TE BUT ARE PRESENTED WITHOUT W ARRANTY OF ANY KIND, EXPRESS OR IMP LIED.
Catalyst 45 00 Series Switches Instal lation Guide Copyright © 200 2 – 2005 Cisc o Systems, Inc. All rights res erved. CCSP , CCVP , the Cisco Square Bridge logo, Follow Me Bro wsing, and StackW ise are trademarks of Cisco Systems, Inc.
.
v Catalyst 4500 Ser ies Switches Insta llation Gu ide 78-14409-08 CONTENTS Preface ix Audienc e ix Organi zati on ix Relat ed Do cume nta tion x Convent ions xi Obtain ing Docu ment ation xvii Cisco.
Contents vi Catalyst 4500 Series Switches Installation Guide 78-14409-08 Supervi sor En gines 1-18 LEDs 1-24 Gigabi t Ethe rnet Upli nk Port s 1-25 10-G igabi t Ethe rnet Upli nk P orts 1-25 SFP Port .
vii Catalyst 4500 Ser ies Switches Insta llation Gu ide 78-14409-08 Conte nts Ventil ati on 2-14 Calcul atin g Sys tem He at Di ssipat ion 2-15 Site- Plann ing Che cklist 2-16 CHAPTER 3 Instal ling th.
Contents viii Catalyst 4500 Series Switches Installation Guide 78-14409-08 Replac ing Bac kplan e Modules on a Catalys t 4507R or 4510R Switch 4-24 Verif y the New Modul es 4-30 CHAPTER 5 Troubles hoo.
ix Cataly st 4500 Series Switches Installat ion Guide 78-14409-08 Preface This pr efac e descri bes th e audi ence, o rganizat ion, a nd conve ntion s of th e Catalyst 4 500 Seri es Switche s Install ation Gui de a nd prov ides inform ation on how to obtain r elated d ocumentatio n and te chnical assistan ce.
Preface Related Documentation x Catalyst 4500 Series Switches Installation Guide 78-14409-08 Related Documentation Refer to the following docu ments for additional Catal yst 4500 series information: • Catalyst 4500 Series Module Installation Guide at http://www .
xi Cataly st 4500 Series Switches Installat ion Guide 78-14409-08 Preface Conv ent io ns • The syste m message guid e appropr iate to your soft ware version. Syste m message g uides are at: http://www .cisco.com/en/US/p roducts/hw/switch es/ps4324/prod ucts_system _message _guides_li st.
Preface Conve ntions xii Catalyst 4500 Series Switches Installation Guide 78-14409-08 Notes use the follo wing con ventions: Note Means r eader ta ke no te . No tes cont ain h elpf ul s ugges ti ons or r efer ence s to mater ial not covered in th e publica tion.
xiii Cataly st 4500 Series Switches Installat ion Guide 78-14409-08 Preface Conv ent io ns W arn ings use the following conv entions: War ni ng IMPORT ANT SAFET Y INSTRUCT IONS This warning symbol means danger . Y ou ar e in a situation that could cause bodily injury .
Preface Conve ntions xiv Catalyst 4500 Series Switches Installation Guide 78-14409-08 Attention IMPORTANTES IN FORMA TIONS DE SÉCU RITÉ Ce symbole d'avertissement indique un danger . V ous vous trouvez dans une situation pouvant entraîner des blessu res ou des dommages corporels.
xv Cataly st 4500 Series Switches Installat ion Guide 78-14409-08 Preface Conv ent io ns Adva rsel VIKTIGE S IKKERHE TSINSTRUKS JONER Dette advarselssymbolet betyr fare.
Preface Conve ntions xvi Catalyst 4500 Series Switches Installation Guide 78-14409-08 Va r ni n g ! VIKTIGA SÄ KERHETS ANVISN INGA R Denna varningssignal signalerar fara.
xvii Cataly st 4500 Series Switches Installat ion Guide 78-14409-08 Preface Obt ain ing Do cume ntat io n Obtaining Documentation Cisco docum entati on and additi onal litera ture are av ailable on Cisc o.com. Cisco also prov ides se veral w ays to obtain technical assista nce and other technical resources.
Preface Obtaining Documentation xviii Catalyst 4500 Series Switches Installation Guide 78-14409-08 Product Docu mentation DVD Cisco docum entation a nd ad ditional l iterature are a v ai lable in the Pr oduct Docume ntation DVD package, whi ch may have shippe d with your pro duct.
xix Cataly st 4500 Series Switches Installat ion Guide 78-14409-08 Preface Docume ntation Feedba ck Documentatio n Feedback Y o u can rate an d provide feed back about Cisco tec hnical doc ument s by completing the online feedbac k form that appear s with the technical docu ments on Cisco.
Preface Obtainin g Techn ical Assist ance xx Catalyst 4500 Series Switches Installation Guide 78-14409-08 Reporting Se curity Problems in Cisco Produ cts Cisco is committed to deli v ering secure products. W e test our pr oducts internally before we rele ase them, and we stri v e to correct all vulne rabilities q uickly .
xxi Cataly st 4500 Series Switches Installat ion Guide 78-14409-08 Preface Obtaini ng T echnical Assi stance servic e contra ct, C isco T ech nica l Assist ance Center (T AC) engineer s provide telepho ne support . If you do not hav e a valid Cisco ser vice contra ct, co ntact you r reseller .
Preface Obtainin g Techn ical Assist ance xxi i Catalyst 4500 Series Switches Installation Guide 78-14409-08 solution s. If your i ssue is not resol ved using the re commen ded res ources, yo ur service req uest is a ssigned to a Cis co en gine er . The T AC Servic e Re quest T ool i s located at thi s URL: http://www .
xxii i Cataly st 4500 Series Switches Installat ion Guide 78-14409-08 Preface Obtaini ng Additiona l Publicati ons and Informa tion Obtaining Ad ditional Public ations and In formation Informa tion abo ut Cisco produ cts, tech nologies, and ne twork solu tions is av ailable fro m va ri ous onlin e and printe d sour ces.
Preface Obtaining Additional Publications and Information xxiv Catalyst 4500 Series Switches Installation Guide 78-14409-08 • Internet Pr otocol Journal i s a qua rterly j ournal pub lished by Cisco Syst ems for eng ineerin g profe ssionals inv olved in de signing, deve loping, and operatin g pu blic a nd pr i v ate i ntern ets an d intr anets.
C HAPTER 1-1 Catalyst 4500 Ser ies Switches Insta llation Gu ide 78-14409-08 1 Product Overview This ch apter pr o vides an ov er vie w of the feat ures an d compo nents of the Catalyst 4500 serie s switc hes.
Chapter 1 Product Ove rview Swit ch F eat ure s 1-2 Catalyst 4500 Series Switches Installation Guide 78-14409-08 Catalys t 4503 Switch Fe atures The Ca talyst 4503 swit ch (see Figure 1-1 ) is a three- slot switch desi gned for high-pe rforma nce, hi gh-den sity w iring c loset appli cations.
1-3 Catalyst 4500 Ser ies Switches Insta llation Gu ide 78-14409-08 Chapter 1 Product Ov erview Switch Features Slot 1 is reserved for the super visor en gine on ly , whic h provides switching , local and rem ot e mana geme nt , and sw itc h-st atus mon itori ng .
Chapter 1 Product Ove rview Swit ch F eat ure s 1-4 Catalyst 4500 Series Switches Installation Guide 78-14409-08 Switching modul e support • 24-port 10/100 B ASE-TX Fast Et hernet swi tching module .
1-5 Catalyst 4500 Ser ies Switches Insta llation Gu ide 78-14409-08 Chapter 1 Product Ov erview Switch Features Switchi ng module support (continue d) • 2-port Gigabit Ethern et switc hing m odule (.
Chapter 1 Product Ove rview Swit ch F eat ure s 1-6 Catalyst 4500 Series Switches Installation Guide 78-14409-08 Catalys t 4506 Switch Fe atures The Ca talyst 4506 swit ch (see Figure 1-2 ) is a six- slot swit ch designed for high-pe rforma nce, hi gh-den sity w iring c loset appli cations.
1-7 Catalyst 4500 Ser ies Switches Insta llation Gu ide 78-14409-08 Chapter 1 Product Ov erview Switch Features for Gi gabit E therne t conn ections, or X2 module s for 10-Gi gabit Ethern et connec tions. Refe r to the inst allatio n note for your superviso r engine for more details on t hese mo dules.
Chapter 1 Product Ove rview Swit ch F eat ure s 1-8 Catalyst 4500 Series Switches Installation Guide 78-14409-08 Super vis or en gine support • Supports th e Supervis or Engine II, II+, II+10 GE, II.
1-9 Catalyst 4500 Ser ies Switches Insta llation Gu ide 78-14409-08 Chapter 1 Product Ov erview Switch Features Switchi ng module support (continue d) • 32-port 10/100- Mbps Fast Et hernet p lus 2 -.
Chapter 1 Product Ove rview Swit ch F eat ure s 1-10 Catalyst 4500 Series Switches Installation Guide 78-14409-08 Catalyst 45 07R Switch F eatures The Catal yst 4507R switch (se e Figure 1-3 ) is a se ven-slot switch designe d for high-pe rforma nce, hi gh-den sity w iring c loset appli cations.
1-11 Catalyst 4500 Ser ies Switches Insta llation Gu ide 78-14409-08 Chapter 1 Product Ov erview Switch Features Series Superv isor Engine s and Switching Modules Insta llation Note . Some supervisor engines use SFP modules for Gigabit Ethe rnet connections, or X2 modules for 10-Gi gabit Ether net connectio ns.
Chapter 1 Product Ove rview Swit ch F eat ure s 1-12 Catalyst 4500 Series Switches Installation Guide 78-14409-08 Super vis or en gine support • Supports the Sup ervisor Engine II, I I+, II+10 GE, I.
1-13 Catalyst 4500 Ser ies Switches Insta llation Gu ide 78-14409-08 Chapter 1 Product Ov erview Switch Features Switchi ng module support (continue d) • 24-port IEEE 802 .3af-co mpliant Po E 10/1 00B ASE-T X switchin g mod ule (WS-X4224 -RJ45V) • 48-port IEEE 802.
Chapter 1 Product Ove rview Swit ch F eat ure s 1-14 Catalyst 4500 Series Switches Installation Guide 78-14409-08 Catalyst 45 10R Switch F eatures The Catal yst 4510R switch (se e Figure 1-4 ) is a ten-slot switch desi gned for high-pe rforma nce, hi gh-den sity w iring c loset appli cations.
1-15 Catalyst 4500 Ser ies Switches Insta llation Gu ide 78-14409-08 Chapter 1 Product Ov erview Switch Features Ins tal lati on Gu id e or th e Catalyst 4500 Se ries Supervi sor Engines a nd Switching Modules Installation Note .
Chapter 1 Product Ove rview Swit ch F eat ure s 1-16 Catalyst 4500 Series Switches Installation Guide 78-14409-08 Super vis or en gine support • Supports t he Supervis or Engine V and V -1 0GE • H.
1-17 Catalyst 4500 Ser ies Switches Insta llation Gu ide 78-14409-08 Chapter 1 Product Ov erview Switch Features Switchi ng module support (continue d) • 32-port 10/100- Mbps Fast Et hernet s witchi.
Chapter 1 Product Ove rview Supervisor Engines 1-18 Catalyst 4500 Series Switches Installation Guide 78-14409-08 Supervisor Engines The fol lo wing s upe rvisor en gine s are a v aila ble for th e Cat.
1-19 Catalyst 4500 Ser ies Switches Insta llation Gu ide 78-14409-08 Chapter 1 Product Ov erview Super visor Engine s Hot- swappable Suppo rted. On non-red undant systems, packets ar e not fo rwarded while the supe rvisor engine is re moved, and a system rebo ot occur s whe n a supe rvisor en gine is re insert ed.
Chapter 1 Product Ove rview Supervisor Engines 1-20 Catalyst 4500 Series Switches Installation Guide 78-14409-08 The Superv isor Engi ne IV and Superv isor Engi ne V support th e Catalyst 450 0 Series NetFlow Services Card ( WS-F4531). The Sup ervisor E ngine V - 10GE supports Ne tFlo w services with out a NetFl ow Ser vices Car d.
1-21 Catalyst 4500 Ser ies Switches Insta llation Gu ide 78-14409-08 Chapter 1 Product Ov erview Super visor Engine s Figur e 1 -7 Catalyst 45 00 Ser ies Supervisor Engine II-Plus TS (WS-X40 13+TS) Fi.
Chapter 1 Product Ove rview Supervisor Engines 1-22 Catalyst 4500 Series Switches Installation Guide 78-14409-08 Figur e 1 -9 Supervisor E ngine III (WS-X40 14) Figur e 1 -1 0 Supervisor E ngine IV (W.
1-23 Catalyst 4500 Ser ies Switches Insta llation Gu ide 78-14409-08 Chapter 1 Product Ov erview Super visor Engine s Figur e 1 -1 1 Supervisor E ngine V (WS-X4516 ) Figur e 1 -12 Supervisor E ngine V.
Chapter 1 Product Ove rview Supervisor Engines 1-24 Catalyst 4500 Series Switches Installation Guide 78-14409-08 • CONSO LE Po rt, page 1 -26 • RESET Bu tton, pa ge 1-26 • CompactFl ash Port, page 1-27 LEDs Ta b l e 1 - 6 describes th e supervisor e ngine LEDs.
1-25 Catalyst 4500 Ser ies Switches Insta llation Gu ide 78-14409-08 Chapter 1 Product Ov erview Super visor Engine s Gigabit Etherne t Uplink Ports The Gigabit Eth erne t uplink ports op erate in full -duplex mod e only . GBICs hav e SC connectors to inter face with multimode f iber (MMF) and single-mode f iber (SMF) ca ble.
Chapter 1 Product Ove rview Supervisor Engines 1-26 Catalyst 4500 Series Switches Installation Guide 78-14409-08 SFP Ports Gigabit Ethernet SFP ports operate in full-duplex mode only and are present on the WS-X 4013+TS, WS-X4516 -10GE and W S-X4013+ 10GE sup ervisor s, as well as some swit ching modul es.
1-27 Catalyst 4500 Ser ies Switches Insta llation Gu ide 78-14409-08 Chapter 1 Product Ov erview Fan Assemb ly Note Us e a paper cli p or other smal l, pointed obj ect to press th e Reset button. CompactFlash Port The C ompac tFlash p ort acce pts a T ype 1 C ompac tFlash card .
Chapter 1 Product Ove rview Fan Assem bly 1-28 Catalyst 4500 Series Switches Installation Guide 78-14409-08 Figu re 1 -13 Cat aly st 4 503 Airf low Figu re 1 -14 Cat aly st 4 506 Airf low 1 1 3 1 1 3 .
1-29 Catalyst 4500 Ser ies Switches Insta llation Gu ide 78-14409-08 Chapter 1 Product Ov erview Fan Assemb ly Figu re 1 -15 Cat aly st 450 7R A irfl ow 68111 Fan assembly W S -X 4 44 8-G B -R J4 5 S .
Chapter 1 Product Ove rview Fan Assem bly 1-30 Catalyst 4500 Series Switches Installation Guide 78-14409-08 Figu re 1 - 16 Cat aly st 4510R Airf low 94942 W S -X 4 44 8-G B -R J45 S T A TU S 1 2 1 1 1.
1-31 Catalyst 4500 Ser ies Switches Insta llation Gu ide 78-14409-08 Chapter 1 Product Ov erview Power Supplies Power Supplies Note For detailed specif ications o n all Catalyst 45 00 series po wer supplies, refer to the “Cata lyst 4500 Series Po wer Supplies” se ction on pag e A-7 .
Chapter 1 Product Ove rview Power Supp lies 1-32 Catalyst 4500 Series Switches Installation Guide 78-14409-08 Figur e 1 -18 4200 W Dual Input A C P ow er Supply Note Th e 4200 W AC po wer supply should not be used i n mixed-voltage conf igurations. A ll the in puts in a chassis must be the sa me vo ltage (1 10 or 220 V).
1-33 Catalyst 4500 Ser ies Switches Insta llation Gu ide 78-14409-08 Chapter 1 Product Ov erview Power Supplies Figur e 1 -20 1400 W DC T r iple-Input P o w er Supply Note The 1400 W DC triple- input pow er supply is not compatible with other po wer supplies use d on these pro ducts, an d can only be us ed with simila r supplies .
Chapter 1 Product Ove rview Power Supp lies 1-34 Catalyst 4500 Series Switches Installation Guide 78-14409-08 T o replac e a po wer s upply , see the “Removing and Repla cing the Power Supply” section on page 4-2 . Power Sup ply LEDs Ta b l e 1 - 7 describes th e po wer supp ly LEDs.
1-35 Catalyst 4500 Ser ies Switches Insta llation Gu ide 78-14409-08 Chapter 1 Product Ov erview Power Supplies Power Sup ply Fan Each p ower supply ha s a built-in fan. Air ent ers th e front of th e power supp ly (power-input en d) an d exits t hroug h the back.
Chapter 1 Product Ove rview Power Supp lies 1-36 Catalyst 4500 Series Switches Installation Guide 78-14409-08 For a 1400 W DC po wer supply , the main power switc h has an input range of –40 .5 to –72 V DC, while the –48 V PoE operates over a range of –40 .
1-37 Catalyst 4500 Ser ies Switches Insta llation Gu ide 78-14409-08 Chapter 1 Product Ov erview Power Supplies The ma ximu m tot al inp ut cur rent is 42.5A and th e maximu m ambi ent te mperatu re is 55 C . T o de termin e tot al maxi mum in put power to a suppl y , add up the active individual modul e input power rat ings.
Chapter 1 Product Ove rview Power Supp lies 1-38 Catalyst 4500 Series Switches Installation Guide 78-14409-08 T able 1 -1 1 Minimum Lo ad T able PSU 1 PSU 2 Input 1 Input 2 Input 3 Input 1 Inp ut 2 Inp ut 3 12V Minimum Load 3.3 V Minimum Load Sing le Op eration Mode 1 ON OFF OFF – – – 1.
1-39 Catalyst 4500 Ser ies Switches Insta llation Gu ide 78-14409-08 Chapter 1 Product Ov erview Power Supplies Dual Redund ant O perat ion M o d e 1 O NO F F O F F O NO F F O F F 2 . 6 6 A 1 . 2 A Mode 2 OFF ON OFF OFF ON OFF 2.66A 1.2A OFF OFF ON OFF OFF ON 2.
Chapter 1 Product Ove rview System A rchitecture 1-40 Catalyst 4500 Series Switches Installation Guide 78-14409-08 System Architecture This sect ion describe s the intera ction between the v arious system components of Catalyst 450 0 series switches. A Ca talyst 4503 only is sho wn in the examples.
1-41 Catalyst 4500 Ser ies Switches Insta llation Gu ide 78-14409-08 Chapter 1 Product Ov erview System Archi tect ure 2800 W AC, 4200 W AC or 1400 W D C) also provide a – 48 V circ uit (sh o wn as a dashed line) to PoE-en abled switching m odules, w hich is th en a v ail able to th e powered device con nected to the switc hing mo dule.
Chapter 1 Product Ove rview System A rchitecture 1-42 Catalyst 4500 Series Switches Installation Guide 78-14409-08 PoE Over -subscription W ith the advent of powered devices re quiring as muc h as 15.
1-43 Catalyst 4500 Ser ies Switches Insta llation Gu ide 78-14409-08 Chapter 1 Product Ov erview System Archi tect ure Although refer ences to “PoE ,” “inl ine-power ,” an d “voice” p ower supplie s and line c ards are synonymous, t here are only t wo versions: C isco pr estandar d and IEEE 80 2.
Chapter 1 Product Ove rview System A rchitecture 1-44 Catalyst 4500 Series Switches Installation Guide 78-14409-08 4200 W of redundan t data and PoE ar e requir ed for a Cisco Cat alyst 4500 Se ries chass is in an A C-powered environmen t, Cis co offers an exte rnal AC po wer she lf that hous es two 2500 W A C po wer supplies.
1-45 Catalyst 4500 Ser ies Switches Insta llation Gu ide 78-14409-08 Chapter 1 Product Ov erview System Archi tect ure with a sing le 15A circ uit. Likewise, it is po ssible to d eploy a fully p opulated Ci sco Catalyst 451 0R with two 20A and one 15A circu its rathe r than a single 60A conn ecti on, whi ch of ten re qui res ra ck re wiring.
Chapter 1 Product Ove rview System A rchitecture 1-46 Catalyst 4500 Series Switches Installation Guide 78-14409-08 • Cisco Gr oup Man agement Pro tocol sup port sta ndards-base d and C isco techn ology-en hanced e f ficient mult imedia ne tworking. • Simp le Ne two rk Ma na geme nt Pr otoco l (SN MP) .
1-47 Catalyst 4500 Ser ies Switches Insta llation Gu ide 78-14409-08 Chapter 1 Product Ov erview System Archi tect ure Figur e 1 -23 S witchi ng T raf fic F lo w Frames flo w into the switc h through interf aces on the switching module s.
Chapter 1 Product Ove rview System A rchitecture 1-48 Catalyst 4500 Series Switches Installation Guide 78-14409-08 Etherne t link to the inter nal switch f abric.
C HAPTER 2-1 Catalyst 4500 Ser ies Switches Insta llation Gu ide 78-14409-08 2 Preparing for Installation War ni ng This unit is intended for installat ion in restricted access area s. A restricted access area can be accessed only thro ugh t he use of a special tool, lock and key , or other m eans of security .
Chapter 2 Preparing for Installation Electro static Disch arge 2-2 Catalyst 4500 Series Switches Installation Guide 78-14409-08 If you will be using your switch as a PoE source, the follo w ing warnin.
2-3 Catalyst 4500 Ser ies Switches Insta llation Gu ide 78-14409-08 Chapter 2 Preparing f or Installa tion Electrostatic Discharge Sometime s, voltage is discharged to some of the pins of the connec tor and not others, o r to so me pin s on t he con nector b efore others.
Chapter 2 Preparing for Installation Site Power Req uirements and H eat Dissipati on 2-4 Catalyst 4500 Series Switches Installation Guide 78-14409-08 • When r emo ving a com ponent, use an y a v ail able ejector le ve rs or cap ti v e installati on scre ws t o relea se the b u s connec tors fr om the bac kplane o r midplane .
2-5 Catalyst 4500 Ser ies Switches Insta llation Gu ide 78-14409-08 Chapter 2 Preparing f or Installa tion Powe r Conn ecti on Gu ideli nes f or AC -Pow ered Syste ms Power Connection Gu idelines for AC-Powered Systems This section prov ides guidelines for connecting the Catalyst 450 0 series switch A C power suppli es to the site po wer sour ce.
Chapter 2 Preparing for Installation Power Conn ection Gu idelines for A C-Powered Sy stems 2-6 Catalyst 4500 Series Switches Installation Guide 78-14409-08 • 1400 W— Ta b l e 2 - 1 lists the AC-i.
2-7 Catalyst 4500 Ser ies Switches Insta llation Gu ide 78-14409-08 Chapter 2 Preparing f or Installa tion Powe r Conn ecti on Gu ideli nes f or AC -Pow ered Syste ms Italy CAB-7K A CI= 8 f t (2.5 m) 250 V AC, 16 A 1/3/16 CEI 23-16 United Kingdom CAB-7KACU= 8 ft (2.
Chapter 2 Preparing for Installation Power Conn ection Gu idelines for A C-Powered Sy stems 2-8 Catalyst 4500 Series Switches Installation Guide 78-14409-08 Italy CAB-751 3ACI= 14 ft (4.3 m ) 250 V AC, 16 A 1/3/ 16, CEI 23-16 United Kingdom CAB-751 3A CU= 14 ft (4.
2-9 Catalyst 4500 Ser ies Switches Insta llation Gu ide 78-14409-08 Chapter 2 Preparing f or Installa tion Powe r Conn ecti on Gu ideli nes f or AC -Pow ered Syste ms Inte rnational CAB- A C-2800W -I NT= 14 ft (4.
Chapter 2 Preparing for Installation Power Conn ection Gu idelines for A C-Powered Sy stems 2-10 Catalyst 4500 Series Switches Installation Guide 78-14409-08 4200 W Power Supply (P WR-C45-4200ACV= ) Applia nce C ouple r North Americ a 120 V A C operati on CAB-US 515P-C19-U S 6 f t (1.
2-11 Catalyst 4500 Ser ies Switches Insta llation Gu ide 78-14409-08 Chapter 2 Preparing f or Installa tion Powe r Conn ecti on Gu ideli nes f or AC -Pow ered Syste ms Australi a CAB-AS 3112-C19- A US 6 ft (1 .82 m ) 250 V AC, 15 A AS/NZZS 3112 Italy CAB- CEI2316- C19-IT 6 ft (1.
Chapter 2 Preparing for Installation Power Conn ection Gu idelines for D C-Powered Sy stems 2-12 Catalyst 4500 Series Switches Installation Guide 78-14409-08 Power Connection Gu idelines for DC-Powere.
2-13 Catalyst 4500 Ser ies Switches Insta llation Gu ide 78-14409-08 Chapter 2 Preparing f or Installa tion Powe r Conn ecti on Gu ideli nes f or DC -Pow ered Syste ms Calculating DC Input Current Complet e po wer usage table s are i n the Catalyst 4500 S eries Module In stallation Guide .
Chapter 2 Preparing for Installation Ventil ation 2-14 Catalyst 4500 Series Switches Installation Guide 78-14409-08 Step 6 Add the DC input curre nt used by data and the DC input cu rren t used by inline devices to find the total DC input current . • T otal DC input current = 6.
2-15 Catalyst 4500 Ser ies Switches Insta llation Gu ide 78-14409-08 Chapter 2 Preparing f or Installa tion Ventilation Appendix A , “Speci fications,” lists the operating and nonoper ating en vironmental site r equirement s for the switches.
Chapter 2 Preparing for Installation Site-Planni ng Checklist 2-16 Catalyst 4500 Series Switches Installation Guide 78-14409-08 Note Alth ough a class 3 device nee ds 15.4 W t o power up, 17 .3 W nee d to be gene rated from the ba ckplane i n order to have 15.
2-17 Catalyst 4500 Ser ies Switches Insta llation Gu ide 78-14409-08 Chapter 2 Preparing f or Installa tion Site-Planning Checklist 3 Power evaluation: • Input power type • Rece ptacle pr oximit y.
Chapter 2 Preparing for Installation Site-Planni ng Checklist 2-18 Catalyst 4500 Series Switches Installation Guide 78-14409-08.
C HAPTER 3-1 Catalyst 4500 Ser ies Switches Insta llation Gu ide 78-14409-08 3 Installing the Switch in a Rack War ni ng This unit is intended for installat ion in restricted access area s. A restricted access area can be accessed only thro ugh t he use of a special tool, lock and key , or other m eans of security .
Chapter 3 Installing the Switch in a Rack Checking the Sh ipping Con tainer C ontents 3-2 Catalyst 4500 Series Switches Installation Guide 78-14409-08 Note For info rmation on inst alling the superviso r engine and sw itching modu les and verif ying switch operatio n, refer to the Catalyst 4500 Series Modu le Installation Guide .
3-3 Catalyst 4500 Ser ies Switches Insta llation Gu ide 78-14409-08 Chapter 3 Installi ng the Switch in a Rack Rack-Mounting the Switch Rack-Mounting the Switch A standa rd rac k-mount kit is include d for m ountin g the switch in a stand ard 19-inc h (48.
Chapter 3 Installing the Switch in a Rack Rack-Moun ting the Swi tch 3-4 Catalyst 4500 Series Switches Installation Guide 78-14409-08 Rack-Mounting Catalyst 4500 Series Switc hes Foll ow these step s to in stall a Cata lyst 4500 se ries switch in a rack: Step 1 Prepare for instal lation a s foll o ws: a.
3-5 Catalyst 4500 Ser ies Switches Insta llation Gu ide 78-14409-08 Chapter 3 Installi ng the Switch in a Rack Rack-Mounting the Switch Note Some equipm ent racks provid e a power strip alon g the lengt h of one of the rear posts . If your rack ha s this featu re, conside r the position of the strip when plan ning fastene r points.
Chapter 3 Installing the Switch in a Rack Rack-Moun ting the Swi tch 3-6 Catalyst 4500 Series Switches Installation Guide 78-14409-08 Figu re 3-1 L Brack ets on th e Front Edge of the Ca taly st 45 03.
3-7 Catalyst 4500 Ser ies Switches Insta llation Gu ide 78-14409-08 Chapter 3 Installi ng the Switch in a Rack Rack-Mounting the Switch Figu re 3-2 L Brack ets on th e Front Edge of the Ca taly st 45 .
Chapter 3 Installing the Switch in a Rack Rack-Moun ting the Swi tch 3-8 Catalyst 4500 Series Switches Installation Guide 78-14409-08 Figu re 3-3 L Brack ets on th e Front Edge of the Ca taly st 45 07.
3-9 Catalyst 4500 Ser ies Switches Insta llation Gu ide 78-14409-08 Chapter 3 Installi ng the Switch in a Rack Rack-Mounting the Switch Figu re 3-4 L Brack ets on th e Front Edge of the C ata lys t 451 0R Switch c. Attach th e cable guid e, if ne eded, using the M3 s cre ws provid ed in th e cabl e manag ement kit .
Chapter 3 Installing the Switch in a Rack Rack-Moun ting the Swi tch 3-10 Catalyst 4500 Series Switches Installation Guide 78-14409-08 Figur e 3-5 At tac hing the Cable G uide t o the C atalyst 4503 S.
3-11 Catalyst 4500 Ser ies Switches Insta llation Gu ide 78-14409-08 Chapter 3 Installi ng the Switch in a Rack Rack-Mounting the Switch Figur e 3-6 At tac hing the Cable G uide t o the C atalyst 4506.
Chapter 3 Installing the Switch in a Rack Rack-Moun ting the Swi tch 3-12 Catalyst 4500 Series Switches Installation Guide 78-14409-08 Figur e 3-7 At tac hing the Cable Guid e t o the C atalyst 4507R .
3-13 Catalyst 4500 Ser ies Switches Insta llation Gu ide 78-14409-08 Chapter 3 Installi ng the Switch in a Rack Rack-Mounting the Switch Figur e 3-8 At tachi ng the Cabl e Guide t o the C atalyst 4 51 0R Swi tch Step 3 Install th e chassis in the rack as follo ws: a.
Chapter 3 Installing the Switch in a Rack Rack-Moun ting the Swi tch 3-14 Catalyst 4500 Series Switches Installation Guide 78-14409-08 c. Secure the chas sis using at least six (three p er si de) 1 2-24 x 3/4-i nch scre ws through the el ongated holes in the L brack et and into the threaded holes in the mounting po st.
3-15 Catalyst 4500 Ser ies Switches Insta llation Gu ide 78-14409-08 Chapter 3 Installi ng the Switch in a Rack Rack-Mounting the Switch Figur e 3-1 0 Instal ling a Ca talyst 45 06 S witc h in th e Ra.
Chapter 3 Installing the Switch in a Rack Rack-Moun ting the Swi tch 3-16 Catalyst 4500 Series Switches Installation Guide 78-14409-08 Figur e 3-1 1 Instal ling a Catalyst 4507R S witc h in the Rack 6.
3-17 Catalyst 4500 Ser ies Switches Insta llation Gu ide 78-14409-08 Chapter 3 Installi ng the Switch in a Rack Rack-Mounting the Switch Figur e 3-1 2 Installing a Ca talyst 451 0R S witch i n the Rac k Step 4 Make sure t hat t he ej ector le v ers are compl etely closed an d the super visor engi ne and switc hing module s are install ed securely .
Chapter 3 Installing the Switch in a Rack System G round Connec tion Guidel ines 3-18 Catalyst 4500 Series Switches Installation Guide 78-14409-08 Step 6 Connect t he switch to an app ropriate ground. Refe r to System Ground Conn ection Guidel ines, page 3-18 .
3-19 Catalyst 4500 Ser ies Switches Insta llation Gu ide 78-14409-08 Chapter 3 Installi ng the Switch in a Rack System Ground Con necti on Guide lines Figur e 3-1 4 Catalyst 4506 Gr ounding Holes 1 1 .
Chapter 3 Installing the Switch in a Rack System G round Connec tion Guidel ines 3-20 Catalyst 4500 Series Switches Installation Guide 78-14409-08 Figur e 3-1 5 Catalyst 4507R Gr ounding Hole s 79481 .
3-21 Catalyst 4500 Ser ies Switches Insta llation Gu ide 78-14409-08 Chapter 3 Installi ng the Switch in a Rack System Ground Con necti on Guide lines Figur e 3-1 6 Catalyst 451 0 R Gr ounding Ho les .
Chapter 3 Installing the Switch in a Rack System G round Connec tion Guidel ines 3-22 Catalyst 4500 Series Switches Installation Guide 78-14409-08 Parts an d Requ ired Tools Note Some parts and required tools described in this section are not a va ilable from Cisco Sys tems.
3-23 Catalyst 4500 Ser ies Switches Insta llation Gu ide 78-14409-08 Chapter 3 Installi ng the Switch in a Rack System Ground Con necti on Guide lines Connectin g System Ground a nd Power This section describ es how to conne ct the Catalyst 4500 series switche s to earth ground.
Chapter 3 Installing the Switch in a Rack System G round Connec tion Guidel ines 3-24 Catalyst 4500 Series Switches Installation Guide 78-14409-08 Figur e 3-1 7 Connecting Sys te m Gr ound on th e S witc h Step 5 Remove the label th at covers the groundi ng pad.
3-25 Catalyst 4500 Ser ies Switches Insta llation Gu ide 78-14409-08 Chapter 3 Installi ng the Switch in a Rack System Ground Con necti on Guide lines Ensure t hat the g rounding lu g and t he attac hed wire will not interf ere with o ther switch ha rdware or ra ck equip ment.
Chapter 3 Installing the Switch in a Rack System G round Connec tion Guidel ines 3-26 Catalyst 4500 Series Switches Installation Guide 78-14409-08.
C HAPTER 4-1 Catalyst 4500 Ser ies Switches Insta llation Gu ide 78-14409-08 4 Removing and Replacing FRUs War ni ng Read the installation instructi ons bef ore connecting the sy stem to the power source. Statement 10 04 War ni ng Only trained and qualified personnel should be allowed to install, replace, or service this equipment.
Chapter 4 Re moving and R eplacing FRUs Removing and Replacing the Pow er Supply 4-2 Catalyst 4500 Series Switches Installation Guide 78-14409-08 This chapte r tells you ho w to remo ve and repla ce Catalyst 4500 serie s fi eld-repla ceable un its (FR Us).
4-3 Catalyst 4500 Ser ies Switches Insta llation Gu ide 78-14409-08 Chapter 4 Removi ng and Replac ing FRUs Removin g and Re pla cing the P ower Su ppl y Figur e 4-1 AC-Input P ow er Supply Figur e 4-.
Chapter 4 Re moving and R eplacing FRUs Removing and Replacing the Pow er Supply 4-4 Catalyst 4500 Series Switches Installation Guide 78-14409-08 Figur e 4-3 DC-Input P o w er Supply Figur e 4-4 1400 .
4-5 Catalyst 4500 Ser ies Switches Insta llation Gu ide 78-14409-08 Chapter 4 Removi ng and Replac ing FRUs Removin g and Re pla cing the P ower Su ppl y Required To ols Y ou will need a flathe ad or Phillips scre wdrive r to p erform th ese proce dures.
Chapter 4 Re moving and R eplacing FRUs Removing and Replacing the Pow er Supply 4-6 Catalyst 4500 Series Switches Installation Guide 78-14409-08 Figur e 4-6 Loosenin g the Side-C lamp Scr ew Step 3 Disconne ct the power cord fr om the power supply bei ng removed.
4-7 Catalyst 4500 Ser ies Switches Insta llation Gu ide 78-14409-08 Chapter 4 Removi ng and Replac ing FRUs Removin g and Re pla cing the P ower Su ppl y Cautio n Use both hand s to grasp a power sup ply . Step 5 Grasp the power supply han dle with o ne hand.
Chapter 4 Re moving and R eplacing FRUs Removing and Replacing the Pow er Supply 4-8 Catalyst 4500 Series Switches Installation Guide 78-14409-08 Installing an AC-Input Power Supply War ni ng The plug-socket combination must be accessible at all times, because it serves as the main disconnecting device.
4-9 Catalyst 4500 Ser ies Switches Insta llation Gu ide 78-14409-08 Chapter 4 Removi ng and Replac ing FRUs Removin g and Re pla cing the P ower Su ppl y Figur e 4-9 Plugging the P o w er Cor d into the P o w er Supply Step 10 Connect the other en d of the power cord to an A C-power input so urce.
Chapter 4 Re moving and R eplacing FRUs Removing and Replacing the Pow er Supply 4-10 Catalyst 4500 Series Switches Installation Guide 78-14409-08 Step 12 V erif y power supply operati on by checki ng the power supply’ s front-pane l LEDs. Y ou should se e the f ollowing: • The LED labeled G OOD is gree n.
4-11 Catalyst 4500 Ser ies Switches Insta llation Gu ide 78-14409-08 Chapter 4 Removi ng and Replac ing FRUs Removin g and Re pla cing the P ower Su ppl y Removin g a DC-Input Po wer Supply This se ction de scribes how to rem ov e a D C-input p ower supply .
Chapter 4 Re moving and R eplacing FRUs Removing and Replacing the Pow er Supply 4-12 Catalyst 4500 Series Switches Installation Guide 78-14409-08 Figur e 4-1 1 DC-Input P ow er Supply Figur e 4-1 2 D.
4-13 Catalyst 4500 Ser ies Switches Insta llation Gu ide 78-14409-08 Chapter 4 Removi ng and Replac ing FRUs Removin g and Re pla cing the P ower Su ppl y Step 5 Disconne ct the DC -input wire s from the t erminal block. D isconnect the groun d wire last ( see Figure 4-13 or Figure 4-14 ).
Chapter 4 Re moving and R eplacing FRUs Removing and Replacing the Pow er Supply 4-14 Catalyst 4500 Series Switches Installation Guide 78-14409-08 Step 6 Using a screwdriver , loos en and remove the captive screws on the power suppl y . (See Fi gure 4-15 , which sho ws the single input po wer supp ly .
4-15 Catalyst 4500 Ser ies Switches Insta llation Gu ide 78-14409-08 Chapter 4 Removi ng and Replac ing FRUs Removin g and Re pla cing the P ower Su ppl y Figur e 4-1 6 Handling a DC-Input P ower Suppl y Step 8 If the bay is to remain empty , install a blank po wer supply f iller plate o ver the opening and secure it with the mountin g screws.
Chapter 4 Re moving and R eplacing FRUs Removing and Replacing the Pow er Supply 4-16 Catalyst 4500 Series Switches Installation Guide 78-14409-08 Installing a DC-Input Power Supply This se ction de scribes how to install a DC-i nput p o wer su pply .
4-17 Catalyst 4500 Ser ies Switches Insta llation Gu ide 78-14409-08 Chapter 4 Removi ng and Replac ing FRUs Removin g and Re pla cing the P ower Su ppl y Foll ow th ese steps to install a DC-input po.
Chapter 4 Re moving and R eplacing FRUs Removing and Replaci ng the Chassis Fa n Assembl y 4-18 Catalyst 4500 Series Switches Installation Guide 78-14409-08 Step 8 V eri fy power supply operat ion by chec king the power supply’ s front-pa nel LEDs .
4-19 Catalyst 4500 Ser ies Switches Insta llation Gu ide 78-14409-08 Chapter 4 Removi ng and Replac ing FRUs Removing a nd Replaci ng th e Chassis F an Assembly Figu re 4-17 Cataly st 450 3 System Fan.
Chapter 4 Re moving and R eplacing FRUs Removing and Replaci ng the Chassis Fa n Assembl y 4-20 Catalyst 4500 Series Switches Installation Guide 78-14409-08 Figu re 4-18 Cataly st 450 6 System Fan Ass.
4-21 Catalyst 4500 Ser ies Switches Insta llation Gu ide 78-14409-08 Chapter 4 Removi ng and Replac ing FRUs Removing a nd Replaci ng th e Chassis F an Assembly Figu re 4-19 Cataly st 450 7R System F .
Chapter 4 Re moving and R eplacing FRUs Removing and Replaci ng the Chassis Fa n Assembl y 4-22 Catalyst 4500 Series Switches Installation Guide 78-14409-08 Figu re 4-20 Cat alyst 4 51 0 R System Fan Asse mbly Required To ols Y ou will need a Philli ps scre wdr i ver f or the f ollo wing tw o pr ocedures.
4-23 Catalyst 4500 Ser ies Switches Insta llation Gu ide 78-14409-08 Chapter 4 Removi ng and Replac ing FRUs Removing a nd Replaci ng th e Chassis F an Assembly Removin g the Fa n Assembly War ni ng When removing the fan tray , keep your hands and fingers away from the spinning fan blades.
Chapter 4 Re moving and R eplacing FRUs Replaci ng Backplane M odules on a Catalyst 45 07R or 4510R Swi tch 4-24 Catalyst 4500 Series Switches Installation Guide 78-14409-08 Verifying the Installation Note T o che ck th e opera tion of the fa ns, you n eed t o power up th e ch assis.
4-25 Catalyst 4500 Ser ies Switches Insta llation Gu ide 78-14409-08 Chapter 4 Removi ng and Replac ing FRUs Replacing Ba ckplane Modules on a Catalyst 4507R or 4510R Switch Step 3 Remove all supervi sor engines a nd switching mod ules from the chassis, a nd find the backp lane mod ules yo u need to rep lace.
Chapter 4 Re moving and R eplacing FRUs Replaci ng Backplane M odules on a Catalyst 45 07R or 4510R Swi tch 4-26 Catalyst 4500 Series Switches Installation Guide 78-14409-08 Figur e 4-2 1 Catalyst 45 .
4-27 Catalyst 4500 Ser ies Switches Insta llation Gu ide 78-14409-08 Chapter 4 Removi ng and Replac ing FRUs Replacing Ba ckplane Modules on a Catalyst 4507R or 4510R Switch Step 4 If you are removing a cloc k mod ule, rem ove the two sc rews that atta ch the mod ule to th e ba ckplan e.
Chapter 4 Re moving and R eplacing FRUs Replaci ng Backplane M odules on a Catalyst 45 07R or 4510R Swi tch 4-28 Catalyst 4500 Series Switches Installation Guide 78-14409-08 Step 7 Pull ou t the m odule w hile hol ding the top left an d top r ight corners.
4-29 Catalyst 4500 Ser ies Switches Insta llation Gu ide 78-14409-08 Chapter 4 Removi ng and Replac ing FRUs Replacing Ba ckplane Modules on a Catalyst 4507R or 4510R Switch Step 9 Make sure the module is fully seated.
Chapter 4 Re moving and R eplacing FRUs Replaci ng Backplane M odules on a Catalyst 45 07R or 4510R Swi tch 4-30 Catalyst 4500 Series Switches Installation Guide 78-14409-08 Verify the New Modules After the switch i s reassembled and po we r is restored, conne ct a terminal to the supervis or engine and m onitor t he boot process.
C HAPTER 5-1 Catalyst 4500 Ser ies Switches Insta llation Gu ide 78-14409-08 5 Troubleshooting If your system has prob lems du ring st art up or ope ration, use t he info rmati on in this chap ter to help isola te the c ause.
Chapter 5 Troubleshoot ing System B oot Verifica tion 5-2 Catalyst 4500 Series Switches Installation Guide 78-14409-08 Note This chapte r cov ers only the chass is comp onent hardwa re as pects of troublesh ooting . For configurati on issues, refe r to the softwa re configurat ion guide or comm and re ference for your swit ch.
5-3 Catalyst 4500 Ser ies Switches Insta llation Gu ide 78-14409-08 Chapter 5 Troubles hooting Problem Solving to the System Comp onent Level Problem Solving to the System Co mponent Level The ke y to success when troublesho oting the system is to isolate the problem to a specif ic system c omponent.
Chapter 5 Troubleshoot ing Using L EDs to Identify Startup P roblems 5-4 Catalyst 4500 Series Switches Installation Guide 78-14409-08 Using LEDs to Identify Startup Problems All sy stem state s in the star tup sequ ence ar e in dicat ed using LED s.
5-5 Catalyst 4500 Ser ies Switches Insta llation Gu ide 78-14409-08 Chapter 5 Troubles hooting Using LEDs to Identify Startup Problems Step 4 V erify that the L EDs lab eled ST A TUS on e ach swit ching m odule are g reen when the supervisor engine completes initializ ation.
Chapter 5 Troubleshoot ing Troublesho oting the Power Supply 5-6 Catalyst 4500 Series Switches Installation Guide 78-14409-08 Troubleshooting the Power Supply T o help isolate a power subsystem problem, follo w these steps: Step 1 Check whether the pow er supply LED labe led GOOD is on or the LED labeled F AIL is on.
5-7 Catalyst 4500 Ser ies Switches Insta llation Gu ide 78-14409-08 Chapter 5 Troubles hooting Troubleshooting the Power Supply If you are una ble to resol ve the probl em, or if you det ermine t hat eithe r a power supply or ba ckplan e connec tor is faulty , contact the Cisco T e chnical Assistance Cente r (T A C) fo r inst ruct ion s.
Chapter 5 Troubleshoot ing Troub leshooting the Fan A ssemb ly 5-8 Catalyst 4500 Series Switches Installation Guide 78-14409-08 The 1400 W DC mu lti-in put supply can not be used with other power supp ly types, but other power suppli es in this produ ct line work with the other type s during an upgr ade.
5-9 Catalyst 4500 Ser ies Switches Insta llation Gu ide 78-14409-08 Chapter 5 Troubles hooting Troubl eshoo ting Backplan e Module s C4K_IOSM ODPOR TMAN-4-F ANTRA YP AR TI ALF AILURE C4K_IOSM ODPOR TM.
Chapter 5 Troubleshoot ing Troubles hooting Sw itching Modules 5-10 Catalyst 4500 Series Switches Installation Guide 78-14409-08 • The swi tch powers down and s tays down for a few minutes to a few days for no cl ear r eason . • The o utput-fail LED on the power supplie s are re d and no power is d elivered to th e ch assis.
5-11 Catalyst 4500 Ser ies Switches Insta llation Gu ide 78-14409-08 Chapter 5 Troubles hooting Troub lesh ooti ng S witch ing M odu les Figur e 5-2 1 0 /1 00 BA SE-T P ort LEDs 17407 STATUS 4 1 2 3 4.
Chapter 5 Troubleshoot ing Troubles hooting Sw itching Modules 5-12 Catalyst 4500 Series Switches Installation Guide 78-14409-08 Troublesho oting Switc hing Modu les Using Cis co IOS Connect a term in.
5-13 Catalyst 4500 Ser ies Switches Insta llation Gu ide 78-14409-08 Chapter 5 Troubles hooting Troub lesh ooti ng S uperv iso r Engi nes Troubleshooting Supervi sor Engine s This se ction on ly add resses pr oblems w ith hard ware. Proble ms with features or configurati on are not c ov ered h ere.
Chapter 5 Troubleshoot ing Troubles hooting Supervi sor Engines 5-14 Catalyst 4500 Series Switches Installation Guide 78-14409-08 Troublesho oting Supe rvisor Engines Us ing Cisco IOS Connect a term i.
5-15 Catalyst 4500 Ser ies Switches Insta llation Gu ide 78-14409-08 Chapter 5 Troubles hooting Troub lesh ooti ng S uperv iso r Engi nes C4K_REDUND ANCY -2-HANDSHAKE_ TIMEOUT C4K_REDUND ANCY -2-POSTF.
Chapter 5 Troubleshoot ing Contacting the Cisco Techn ical Assistanc e Center 5-16 Catalyst 4500 Series Switches Installation Guide 78-14409-08 Some probl ems can be solved by resetti ng the supervi sor engin e.
5-17 Catalyst 4500 Ser ies Switches Insta llation Gu ide 78-14409-08 Chapter 5 Troubles hooting Contacti ng the Cisco Te chnica l Assistance Center See the “Obt ainin g T echnical Assi sta nce” sect ion on page xx for more inform ation about conta cting the T AC.
Chapter 5 Troubleshoot ing Contacting the Cisco Techn ical Assistanc e Center 5-18 Catalyst 4500 Series Switches Installation Guide 78-14409-08 Figur e 5-4 Catalyst 4506 Ser ial Numbe r Location 1 1 3.
5-19 Catalyst 4500 Ser ies Switches Insta llation Gu ide 78-14409-08 Chapter 5 Troubles hooting Contacti ng the Cisco Te chnica l Assistance Center Figur e 5-5 Catalyst 45 07R Ser ial Numbe r Location.
Chapter 5 Troubleshoot ing Contacting the Cisco Techn ical Assistanc e Center 5-20 Catalyst 4500 Series Switches Installation Guide 78-14409-08 Figur e 5-6 Catalys t 451 0R Ser i al Number Locati on 1.
A-1 Catalyst 4500 Ser ies Switches Insta llation Gu ide 78-14409-08 APPEND IX A Specifications Cable and technical sp ecif ication s for Catalyst 4500 series switch es are p rovided in the follo wing .
Append ix A Specifications Cata lyst 4503 Swit ch Spe cifi catio ns A-2 Catalyst 4500 Series Switches Installa tion Guide 78-14409-08 Catalyst 4503 Switch Specifications Ta b l e A - 1 lists the Catalyst 45 03 switch specific ations.
A-3 Catalyst 4500 Series S witches Installa tion Guide 78-14409-08 Append ix A Specification s Catalyst 4506 Switch Specifica tions Catalyst 4506 Switch Specifications Ta b l e A - 2 lists the Catalyst 45 06 switch specific ations. Powe r PoE suppl ied –48 VDC Power to Module s and fans 12 VDC Power to ba ckplan e compo nents 3.
Append ix A Specifications Catalyst 4507R Switch Spe cifications A-4 Catalyst 4500 Series Switches Installa tion Guide 78-14409-08 Catalyst 4507R Switch Specifications Ta b l e A - 3 lists the Catalyst 45 07R switch sp ecif ication s. Phy sical Character istics Dim ensions (H x W x D) 1 7.
A-5 Catalyst 4500 Series S witches Installa tion Guide 78-14409-08 Append ix A Specification s Catalyst 4507R Switch Sp ecification s Humi dity (RH) , ambient (noncond ensin g): operati ng nono perati.
Append ix A Specifications Catalyst 4510R Switch Spe cifications A-6 Catalyst 4500 Series Switches Installa tion Guide 78-14409-08 Catalyst 4510R Switch Specifications Ta b l e A - 4 lists the Catalyst 4 510R switch specif icatio ns.
A-7 Catalyst 4500 Series S witches Installa tion Guide 78-14409-08 Append ix A Specification s Catalyst 4500 Serie s Power Supplies Catalyst 4500 Series Power Supplies Ta b l e s A-5 through A-12 list the specif icati ons for the Cata lyst 4500 series p o wer supplies.
Append ix A Specifications Catalyst 4500 Series Power Supplies A-8 Catalyst 4500 Series Switches Installa tion Guide 78-14409-08 T able A -5 1 0 00 W AC-Input P ow er Supply Specificatio ns Item Specification Minim um software re quiremen t Ci sco IOS Releas e 12.
A-9 Catalyst 4500 Series S witches Installa tion Guide 78-14409-08 Append ix A Specification s Catalyst 4500 Serie s Power Supplies Power supply output 1300 W maximum 1000 W+ 40 W redundan t mode (Dat.
Append ix A Specifications Catalyst 4500 Series Power Supplies A-10 Catalyst 4500 Series Switches Installa tion Guide 78-14409-08 Cautio n Do not m ix the 1400 W DC power sup ply wit h any oth er power supp ly , even for a hot swap or othe r short-term em ergency .
A-11 Catalyst 4500 Series S witches Installa tion Guide 78-14409-08 Append ix A Specification s Catalyst 4500 Serie s Power Supplies DC-i nput curren t Data only: 31 A @ –60 VDC Data and inline devices: 180 A maxi mum @ –48 VD C input Note The inpu t power is configur able in the CLI.
Append ix A Specifications Catalyst 4500 Series Power Supplies A-12 Catalyst 4500 Series Switches Installa tion Guide 78-14409-08 Cataly st 4503-Speci fic Power Usage (data onl y) Maximu m draw 475 W Maximu m input 633 W Current dra w at –40.5 V (min voltage) Current dra w at –72 V (max v oltage) 15.
A-13 Catalyst 4500 Series S witches Installa tion Guide 78-14409-08 Append ix A Specification s Catalyst 4500 Serie s Power Supplies T able A -9 1 400 W DC T r iple-In put P o w er Supply Spec ifications Item Specification Minim um software requi rement Cisco IOS Rele ase 12.
Append ix A Specifications Catalyst 4500 Series Power Supplies A-14 Catalyst 4500 Series Switches Installa tion Guide 78-14409-08 Catalyst 4503-Specifi c Po wer Usage (data on ly) T wo mo dules minimum required @ –40.
A-15 Catalyst 4500 Series S witches Installa tion Guide 78-14409-08 Append ix A Specification s Catalyst 4500 Serie s Power Supplies T able A -1 0 Input Modes Input Mode Input Number Input Configuration Maximum T otal Output Power 1 1 1 x 12.5 A 386 W @ –40 .
Append ix A Specifications Catalyst 4500 Series Power Supplies A-16 Catalyst 4500 Series Switches Installa tion Guide 78-14409-08 T able A -12 2800 W AC-In put P o w er Supply Specificatio ns Item Specification Minim um software re quiremen t Cisco IOS Release 12 .
A-17 Catalyst 4500 Series S witches Installa tion Guide 78-14409-08 Append ix A Specification s Catalyst 4500 Serie s Power Supplies Note Th e 4200 W AC po wer supply should not be used i n mixed-voltage conf igurations. All the inputs in a chassis must be at the same v oltage (110 V A C or 220 V A C).
Append ix A Specifications Catalyst 4500 Series Power Supplies A-18 Catalyst 4500 Series Switches Installa tion Guide 78-14409-08 Ta b l e A - 1 4 shows the wattage outpu t possible with t he 4200W power supply in redunda nt mode. In red undan t mode, both power supplie s must have identical inputs an d all inputs mu st be at the same v oltage.
B-1 Catalyst 4500 Ser ies Switches Insta llation Gu ide 78-14409-08 APPEND IX B Repacking a S witch If you need to retu rn your Catalyst 4500 se ries s witch to the fa ctory , use the instruct ions i n this a ppendix to re pack your switch in pre parati on for s hipping .
Appendix B Repacking a Switch B-2 Catalyst 4500 Series Switches Installa tion Guide 78-14409-08 Figur e B -1 Catalyst 45 00 Ser ies Sw itc h P ac king Ma t er ial Packing carton Packing foam Packing f.
IN- 1 Catalyst 4500 Ser ies Switches Insta llation Gu ide 78-14409-08 INDEX Numerics 10/100BAS E-T port LED s 5-11 1000BASE -T interfac es 1-3, 1-7, 1-11, 1- 15 1000BASE -X Etherne t interf aces 1-19 .
Index IN-2 Catalyst 4500 Series Switches Installation Guide 78-14409-08 autonegotiati on Catalyst 4503 switche s (table) 1-3 Catalyst 4506 switche s (table) 1-7 Catalyst 4507 switche s (table) 1-11, 1.
IN- 3 Catalyst 4500 Ser ies Switches Insta llation Gu ide 78-14409-08 Index D DC-inp ut power supplie s connec ting syst em grou nd 3-23 descript ion 1-31 environm ental monitori ng 1-35 figure 1-32, .
Index IN-4 Catalyst 4500 Series Switches Installation Guide 78-14409-08 fiel d-re place able unit s See FRUs Flash code troublesh ooting 5-5 FRUs AC-inp ut power supplie s 4-5 to 4-10 DC-inp ut power .
IN- 5 Catalyst 4500 Ser ies Switches Insta llation Gu ide 78-14409-08 Index checki ng po wer suppl ies 5-4 checki ng supe rviso r engin es 5-2 See also specific types of LEDs Link L ED descript ion (t.
Index IN-6 Catalyst 4500 Series Switches Installation Guide 78-14409-08 S serial num bers 5-16 ship pi ng i nstr ucti ons B-1 show system command 4-10 site planni ng chec klist 2-16 slots Catalyst 450.
IN- 7 Catalyst 4500 Ser ies Switches Insta llation Gu ide 78-14409-08 Index UTILI ZATION LEDs descript ion (tabl e) 1-24 V voltage specifi cati ons A-10, A-13 W weight Catalyst 4503 switche s (table) .
Index IN-8 Catalyst 4500 Series Switches Installation Guide 78-14409-08.
Een belangrijk punt na aankoop van elk apparaat Cisco Systems WSC4500XF16SFP (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Cisco Systems WSC4500XF16SFP heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Cisco Systems WSC4500XF16SFP vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Cisco Systems WSC4500XF16SFP leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Cisco Systems WSC4500XF16SFP krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Cisco Systems WSC4500XF16SFP bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Cisco Systems WSC4500XF16SFP kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Cisco Systems WSC4500XF16SFP . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.