Gebruiksaanwijzing /service van het product MS2005 van de fabrikant Clarion
Ga naar pagina of 20
MS2005BO.QXD 6/27/2002 2:25 PM Page 1.
C ongratulations on your purchase of this Ungo System. Please read this manual thoroughly to familiarize yourself with your system’s components and operation. Discuss any questions you might have with your installing dealer. Record the serial number of your Ungo System and keep all dealer records and receipts.
Table of Contents 1. About Your System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Page 1 2. Remote Transmitters Remote Transmitter Layout . . . . . . . . . . . . . . . . . . . . . . . .
MS2005BO.QXD 6/27/2002 2:25 PM Page 4.
The Ungo MS2005 is a state-of-the-art combination vehicle security and remote controlled car starter system. The MS2005 offers security features designed to deter and detect potential intrusions to your vehicle. It will alert and inform the driver and people in the vicinity of your vehicle when a zone is violated.
Page 2 - MS2005 Owner’s Manual Remote Transmitter Layout The Ungo MS2005 comes with 2 multi-function Remote Transmitters used to control nearly all of the system’s features. Each time a transmitter button is pressed, the LED will flash to indicate that a transmission is taking place.
MS2005 Owner’s Manual - Page 3 Battery Replacement Your Ungo Remote Transmitter uses a 12 volt alkaline battery, which will need to be replaced from time to time. Under normal conditions, the battery should last for up to a year before it needs replacement.
Page 4 - MS2005 Owner’s Manual Remote Arming When Armed, the system monitors and protects 3 independent areas, or zones , including the doors, hood/trunk, and shock sensor. To Arm the system: 1. Turn off the ignition. 2. Press Button 1. • The siren/horn will chirp once.
MS2005 Owner’s Manual - Page 5 * The siren chirps and light flashes during disarming will alert you if the system had been triggered while armed. 2 chirps / 2 flashes = normal disarming 3 chirps / 3.
Page 6 - MS2005 Owner’s Manual To start the Passive Arming Process: 1. Turn off the ignition.* • The status LED will begin to flash quickly. 2. Open the door and exit the vehicle. • Once all doors are closed and the dome light is turned off, the LED will turn off.
MS2005 Owner’s Manual - Page 7 3. Turn ignition key on. 4. Within 4 seconds, press and hold the Override switch. • The system will disarm. 5. You can now start and drive the car. Note: During installation, your installer can program the system to give 10 second entry delay when the system Arms passively.
Page 8 - MS2005 Owner’s Manual Remote Starting To Remote Start the System: 1. Be sure the System is not in Valet Mode. 2. Press Button 4. • The parking lights will turn on. • T he siren will chirp 3 times (if the system is Armed, the shock sensor will turn off).
MS2005 Owner’s Manual - Page 9 To re-enter the vehicle and resume driver control: 1. Disarm the alarm by pressing Button 2 on the Remote Transmitter.* • The doors will unlock.* 2. Turn on the ignition. 3. Press the brake pedal to disengaged the MS2005.
Valet Mode Allows you to temporarily disable the security system when the car is being service or turned over to a parking attendant. To turn Valet Mode on or off: 1. Turn on the ignition. 2. Press and hold the override switch. 3. While holding the override switch, turn off the ignition.
Dome Light Control The dome light will turn on for 20 seconds when the system is disarmed (or unlocked in Valet Mode) using the Remote Transmitter. Auxiliary Function This function will operate regardless of whether the system is armed or disarmed and will stay active for as long as the Button 3 is held.
Notes Page 12 - MS2005 Owner’s Manual MS2005BO.QXD 6/27/2002 2:25 PM Page 12.
MS2005 Owner’s Manual - Page 13 You can use this chart to quickly identify and interpret your system’s chirp indications and LED flashes. Reference Chart Output When Status 1 chirp 1 + 4 chirps ar.
Page 14 - MS2005 Owner’s Manual You can use these tables to quickly identify and interpret the MS2005’s parking light and LED indications. Technical Data System Indications Specifications Main Uni.
MS2005 Owner’s Manual - Page 15 1. Ungo Security Corporation of Gardena, California ("Ungo Security") warrants this Ungo system to be free from defects in materials and workmanship and to comply with Ungo Security’s applicable printed specifications.
Ungo Security Corporation A Clarion Company 661 West Redondo Beach Blvd. Gardena, CA 90247 800-Go-Clarion www.clarion-usa.com © Ungo Security Corporation, Gardena, CA 97-MS2005-10 Rev.
Een belangrijk punt na aankoop van elk apparaat Clarion MS2005 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Clarion MS2005 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Clarion MS2005 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Clarion MS2005 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Clarion MS2005 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Clarion MS2005 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Clarion MS2005 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Clarion MS2005 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
