Gebruiksaanwijzing /service van het product CDP-102 van de fabrikant Classe Audio
Ga naar pagina of 82
Owner’ s Manual CDP-102 and CDP-202 Disc Players CDP-102 和 CDP-102 光盘播放机 用户手册 中文 ENGLISH.
NOTICE All of us at C lassé take extr eme c are t o ens ure t hat y our p urcha se wi ll re main a pri zed i nvest ment. We a re pr oud t o inf orm y ou that all C lassé comp onent s hav e bee n of– ciall y app roved for the E urope an Co mmuni ty (C E) ma rk.
Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer»s instructions.
4 Contents W elcome to the Classé family ....................................................................... 6 a word about installation ...................................................................... 6 Unpacking and Placement ............
5 The Menu System ........................................................................................ 2 5 main menu system ............................................................................... 2 5 system setup ..........................
6 W elcome to the Classé family Congratulations on your purchase of a Classé product. It is the result of many years of continuous re–nement, and we are sure that you will enjoy it for many years to come. We value our relationship with our customers.
7 Unpacking and Placement unpacking your player Carefully unpack your disc player according to the supplied instructions, and remove all accessories from the carton. Important! Keep all packing materials for future transport of your Classé Important! Keep all packing materials for future transport of your Classé product.
8 serial number The serial number for your disc player is found on the rear of the unit. Please note and record this number on the page entitled Important Safety Instructions for your future reference. register your pur chase! Having found the serial number, now would be a good time to register your purchase.
9 The Standby LED will —ash to indicate the condition. warm up/break-in period Your new Classé disc player will deliver outstanding performance immediately. However, you should expect to hear it improve somewhat as it reaches its normal operating temperatures and its various components ≈break-in.
10 Special Design Featur es fl exible GUI The LCD touchscreen on the front panel of your new component supports an extremely —exible and versatile graphical user interface (GUI) while maintaining a clean, uncluttered appearance.
11 MENU CDP-202 LOAD � Fr ont Panel 1 Standby button & LED indicator The front panel Standby button will toggle the player between its fully operational status and a standby mode that leaves the.
12 2 Menu button Pressing the front panel Menu button will call up the menu system, replacing the normal status display in the LCD touchscreen. 3 LCD touchscreen You may control the player by using the front panel LCD touchscreen .
13 Rear Panel 1 Analog Outputs The front left and right channels are supported with both balanced analog outputs on XLR connectors and single-ended analog outputs on RCA connectors.
14 The pin assignments of these XLR-type female output connectors are: Pin 1: Signal ground Pin 2: Signal + (non-inverting) Pin 3: Signal √ (inverting) Connector ground lug: chassis ground These pin assignments are consistent with the standards adopted by the Audio Engineering Society.
15 coaxial digital output The coaxial digital output provides a digital audio signal via a 75 Ω coaxial cable equipped with RCA-type connectors. Connect this output to a corresponding coaxial digital input on your preampli–er/processor.
16 Note: Many IR repeater systems do not yet support the stripped- Note: Many IR repeater systems do not yet support the stripped- carrier signal format requir ed by your disc player . If yours does not, a Delta IR Interface may be requir ed to ensur e compatibility between your IR repeater system and your Delta-series Classé equipment.
17 7 RS-232 Control Port This port has two purposes: • downloading new operating software into your player (should new features ever be added, for example) • external control of your preampli–er.
18 The Remote Contr ol Your new disc player comes with a versatile remote control which can control both the disc player and several aspects of the rest of a Classé-based system.
19 • Time cycles through the four time display modes: time elapsed on track time elapsed on disc time remaining on track time remaining on disc • Prog (for Program) allows you to quickly and easil.
20 • Disc Menu presents the menu of available chapters, within whatever title you are watching at the moment. (See explanation of DVD menus in this section.) • Title gives you a list of available ≈titles∆ on the disc you are watching. (See explanation of DVD menus in this section.
21 5 System Controls The remote control can also be programmed to perform user de–ned functions through the Fkeys. • F1/F2/F3/F4 keys are available for controlling features not covered by the other buttons on the remote control. You are able to choose what the disc player does when it receives the infrared signal from a particular Fkey.
22 Using the CDP-102 and CDP-202 Your disc player includes a versatile touchscreen LCD display which supports both an attractive information display and a —exible menu system. Because of this —exibility, the disc player can present different controls and capabilities when playing a CD, and when playing a DVD.
23 playlist Pressing the playlist button on the display brings up the playlist for the current disc. If you have not created a custom program for the disc, the playlist will simply be a list of all the availab le tracks on the CD, in order. If y ou have cre ated a custom program (see below), it will be presented to you here.
24 DVD operational menu When a DVD is inserted, a different set of controls is displayed. the home screen The home screen for DVDs is presented at left in the graphic above, and contains basic information about where you are within the disc, as well as basic navigation buttons similar to those on your remote control.
25 The Menu System The disc player uses its versatile touchscreen display to make a wide variety of setup choices and system defaults readily available. Using these menus, you can easily customize the behavior of your disc player to suit your particular system»s con–guration, as well as your personal preferences.
26 teach IR The disc player has discrete infrared (IR) command codes for all its functions, a list that extends far beyond what is required by normal remote controls. However, many of these functions are critical if you plan to create a customized remote control with macros that take command of your entire system.
27 remote Fkeys This button brings up the remote Fkeys menu. The remote control supplied with your Classé product includes four user- programmable function keys , or ≈ Fkeys .∆ They are labeled F1 , F2 , F3 , and F4 , and are located near the bottom of the remote control.
28 status The status screen provides several items of information on the currently playing disc, as well as access to information on the software and internal sensors of the disc player. version info The version info button on the status screen takes you to the version information screen.
29 brightness The brightness setting has three possible values: low, medium, and high . Select the appropriate setting based on the level of ambient light typically found in your listening room while using the system.
30 volume display If you elect to use the variable volume capability, you have two choices as to how the volume setting is displayed. • Absolute is how most volume controls work, namely that a setting of ≈0∆ indicates no sound, while larger numbers represent higher volumes.
31 System Setup Pressing the menu button to the left of the LCD touchscreen, followed by pressing the on screen system setup button, will bring you to a menu system that gives you a wide range of control over how the disc player works both on its own and as a part of your overall system.
32 audio delay When a disc has been incorrectly authored, the audio can be out of sync from the video. Audio Delay allows you to compensate for this by inserting a delay that repositions the audio in relation to the video and brings them into sync.
33 distance The distance setting adjusts the speaker distance settings manually. Simply measure the distance with a tape measure or equivalent, and enter the distance into the menu.
34 aspect ratio You have three choices for the way widescreen movies will be displayed on your television. The choice should be determined by the capabilities of your television as well as your personal preference.
35 audio language You can also set a preference for the spoken language used in the soundtrack being played. Automatic defers to the default soundtrack on the disc itself. If you prefer, you can insist that the unit play an English, French, German, Spanish , or Italian soundtrack (assuming one is available).
36 Updating Y our Unit From time to t ime C lassé des igns new softw are t hat will enhan ce t he pe rform ance of yo ur co mpon ent. Updat ing your unit with the late st so ftwar e is a ma tter of downl oadin g a –le f rom t he C lassé web site (www.
37 T r oubleshooting In general, refer any service problems to your Classé dealer. Before contacting your dealer, however, check to see if the problem is listed here. If it is, try the suggested solutions. If none of these solves the problem, contact your Classé dealer.
38 4. The disc is spinning but there is no sound in one or both channels. ✓ Check that both interconnect cables are properly connected between the outputs of the disc player and the inputs of your preampli–er. ✓ Ensure that the preampli–er/ampli–er units being used are properly con–gured.
39 Specifi cations – CDP-102 All speci–cations are accurate at the time of printing. Classé reserves the right to make improvements without notice. ■ Frequency r esponse (Balanced) 8 Hz √ 20 kHz Ø0.1dB (Balanced) 8 Hz √ 20 kHz Ø0.1dB (Balanced) (single ended) 8 Hz √ 20 kHz +0/-0.
40 Specifi cations – CDP-202 All speci–cations are accurate at the time of printing. Classé reserves the right to make improvements without notice. ■ Frequency r esponse (Balanced and single ended) 8 Hz √ 20 kHz +0/-0.4dB ■ Distortion (THD+noise) 0.
41 Dimensions ENGLISH.
注意 Classé 公司的所有工作人员全心全意地制作，确保为你提供极具价值的购买选择。我们很自豪的告诉您，所有 Classé 部件均 通过欧盟 (CE ) 标志的官.
重要安全注意事项 1. 阅读这些说明。 2. 保存这些说明 。 3. 注意所有警告。 4. 遵守所有说明 。 5. 请勿在近水处使用本设备 。 6. 使用干布进行清洁 。 7. 不得堵塞任何通风口。按照制造商的说明进行安装 。 8.
44 目录 欢迎使用 Classé 公司的产品 ......................................................................... 4 6 安装简介 ................................................................................................ 4 6 打开包装并摆放好播放机 .
45 菜单系统 ....................................................................................................... 6 5 主菜单系统 ............................................................................................ 6 5 系统设置 .
46 欢迎使用 Classé 公司的产品 祝贺您购买 Classé 公司的产品，该产品是多年持续改进的结果。我们深 信，今后许多年您将享受该产品所带来的乐趣。 .
47 打开包装并摆放好播放机 打开播放机包装 根据我们提供的说明，仔细打开光盘播放机的包装，并去除包装箱上所 有附属物。 重要提醒！ 保留所有包.
48 序列号 序列号在播放机的背面，请在标题为“重要安全说明”的那一页记下该 号码，以备将来使用。 注册 找到序列号之后，就可以将您的产品注册.
49 预热和磨合期 这台新买的播放机将立即展现其突出的性能。但是，您应该期待该产品 在达到正常工作温度以及各种组件“磨合”之后能够表现出更好.
50 特别的设计特性 灵活的 GUI 该播放机前面板上的 LCD 触摸屏支持相当灵活和强大的图形用户界面 (GUI) ，同时又保留着干净、整洁的外观。从触摸屏上.
51 MENU CDP-202 LOAD � 前面板 1 待机按钮和 LED 指示灯 前面板的 Standby （待机）按钮将使播放机在全力运行状态和待机 模式之间转换。待机模式使播放机停.
52 2 菜单按钮 按下前面板的 Menu （菜单）按钮将调出菜单系统，取代 LCD 触 摸屏上正常的状态显示。 3 LCD 触摸屏 我们可以使用前面板上的 LCD 触摸屏 来.
53 后面板 1 模拟输出 使用 XLR 连接口的平衡模拟输出和 RCA 连接口的单端模拟输出， 都可以支持.
54 这些 XLR 型孔式输出连接器的引脚分配如下： 引脚 1 ：信号地 引脚 2 ：信号＋（非反相） 引脚 3 ：信号－（反相） 连接器接地片：机壳接地 这些引.
55 同轴电缆数字输出 t 同轴电缆数字输出通过带 RCA 型连接器的 75 欧姆同轴电缆，提供 数字音频信号。将该输出连接到前置放大器 / 处理器上对应的同.
56 注意： 许多红外线转发系统还不支持该播放器要求的剥离载波信号 格式。如果是这样，那么您可能需要使用 Delta 红外线接口， 以确保红外线转发系.
57 7 RS-232 控制端口 该端口有两个用途： • 将新的操作软件下载到播放机中（比如增加了新功能时） • 通过 i-Command ™ 、 AMX ® AMX ® AMX 和 Crestron ™ 这.
58 遥控器 本产品随机提供有多功能遥控器，既可以控制本播放机，也可以控制 本公司的某些其他系统。遥控器上的按键根据其功能在逻辑上被分为 几.
59 • Time ：循环切换 4 种时间显示模式： 音轨播放时间、 光盘播放时间、 音轨剩余时间、 光盘剩余时间。 • Prog （表示编程） ：使用户迅速且容易.
60 • Disc Menu 按钮给出正观看的标题内所有段的菜单（见前 面关于 DVD 菜单的解释） 。 • Title 按钮列出正观看的光盘上包括的“标题” （见前面关 于 .
61 5 系统控制 利用功能键，我们还可以将遥控器设定为执行用户定义的功能。 • F1/F2/F3/F4 键可用于遥控器上其他按钮不具有的控制功 能。用户可以选.
62 使用 CDP-102 和 CDP-202 本播放机带有多功能的触摸屏 LCD 显示器，支持引人注目的信息显 示和灵活的菜单系统。由于这种灵活性，本播放机可以在播放 C.
63 播放列表 按下显示屏上的 playlist （播放列表）按钮将显示当前光盘的播放列 表。如果还没有为光盘创建定制的播放列表，则该按键将只是顺序列出 C.
64 DVD 操作菜单 当插入 DVD 时，将显示一组不同的控制按钮。 主屏幕 上图左边是 DVD 的 home （主）屏幕，包括关于当前所在光盘位置的 基本信息，还有.
65 菜单系统 本播放机使用功能丰富的触摸屏显示，使用户可以轻松设定各种选项和 系统默认值。使用这些菜单，用户可以轻松定制该播放机的行为，以.
66 训练 IR 训练 IR 训练 本播放机包括所有功能的红外线（ IR ）命令代码，其范围远远超出正常 遥控操作的需要。然而，如果用户打算制作定制的、包含.
67 遥控器功能键 该按钮将引出 remote Fkeys （遥控器功能键）菜单。 随本产品提供的遥控器包括四个可编程的用户功能键，它们分别被标记 为 F1 、 F2 、 .
68 状态 status （状态）屏幕提供关于当前正播放光盘的多项信息，还可以访问 关于本播放机的软件和内部传感器的信息。 版本信息 按下状态屏幕上 versi.
69 亮度 brightness （亮度）设置共有三项：低、中和高。基于使用本系统时听 音室内通常的环境光强度来选择合适的亮度。高亮度通常最适合光线较 强的.
70 音量显示 如果用户选择使用可变音量功能，则需要选择显示音量设置的方式： • Absolute （绝对） ：这是大多数音量控件的工作方式，即 0 表示没 有.
71 系统设置 按下 LCD 触摸屏左边的 menu （菜单）按钮，再按下屏幕上的 system setup （系统设置）按钮，将进入对播放机进行各种控制的菜单系统， 而播.
72 音频延迟 如果光盘的编辑有错误，则音频可能与视频不同步。音频延迟设置通过 插入一段延迟时间，重新确定与视频相关的音频位置，使音视频同步.
73 距离 distance （距离）屏幕用于手动调整喇叭距离设定值。 只需用卷尺或其他尺子测量出距离，然后将其输入本菜单即可。播放机 将自动将输入的距.
74 宽高比 对于将显示在电视机上的宽银幕电影来说，我们有三种选择。所作的选 择取决于电视机的功能和个人偏好。 • 4:3 — —如果用户有宽高比为 4.
75 音频语言 用户还可以设定配音中使用的语言。选择 Automatic （自动）将使用光 盘本身默认的配音。如果愿意，用户可以选择使播放机播放英语、法 语.
76 产品升级 Class é 公司经常设计新的软件，以增强产品性能。用最新软件更新产品 只需要从官方网站（ www.c lasseaudi o.
77 疑难解答 一般来说，用户应该将任何需维修的问题交给经销商处理。不过，在联 系经销商之前，您可以看看遇到的问题是否已经在下面列出。如果是.
78 4. 光盘在旋转，但一个或两个声道内没有声音 ✓ 检查播放机输出与前置放大器之间的两根互连电缆是否连 接正确。 ✓ 确保使用的前置放大器单元配置正确（可能需要参考这些 产品的用户手册，以了解更多信息） 。 5.
79 CDP-102 技术规格 所有规格在本手册印刷时都是准确的，本司保留在不通知客户的情况下 改进产品的权利。 ■ 频率响应 （平衡输出） 8 Hz √ 20 kHz Ø0.1dB （单端输出） 8 Hz √ 20 kHz +0/-0.7dB ■ 失真 （ THD+ 噪声） 0.
80 CDP-202 技术规格 所有规格在本手册印刷时都是准确的，本司保留在不通知客户的情况下 改进产品的权利。 ■ 频率响应 （平衡和单端输出） 8 Hz √ 20 kHz +0/-0.
81 尺寸 中文.
Classé Audio 5070 François Cusson Lachine, Quebec Canada H8T 1B3 +1 (514) 636-6384 +1 (514) 636-1428 (fax) （传真） http://www.classeaudio.com email （ 电子信箱 ） : cservice@classeaudio.com North America （ 北 美地 区 ） : 1 800 370 3740 email （ 电子信箱 ） : classe@bwgroupusa.
Een belangrijk punt na aankoop van elk apparaat Classe Audio CDP-102 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Classe Audio CDP-102 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Classe Audio CDP-102 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Classe Audio CDP-102 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Classe Audio CDP-102 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Classe Audio CDP-102 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Classe Audio CDP-102 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Classe Audio CDP-102 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
