Gebruiksaanwijzing /service van het product D480V van de fabrikant Clevo
Ga naar pagina of 120
.
.
Preface I Preface Notebook Computer D470V/D480V Service Manual.
Preface II Preface Notice The company reserves the right to revise this publication or to change its conten ts without notice. In formation contained herein is for reference only and does not constitute a commitment on the part of the manufacturer or any subsequent ven- dor.
Preface III Preface About this Manual This manual is intended for service pe rsonnel who have completed sufficient training to undertake the maintenance and inspection of personal computers. It is organized to allow you to lo ok up basic information for servicing and/or upgrading components of the D470V/ D480V series notebook PC.
Preface IV Preface IMPORTANT SAFETY INSTRUCTIONS When using your telephone equipment, basic safety precautions should always be foll owed to reduce the risk of fire, elec- tric shock and injury to pe rsons, including the following: 1.
Preface V Preface Instructions for Care and Operation The notebook computer is quite rugged, but it can be damaged. To prevent this, follow these suggestions: 1. Don’t drop it, or expose it to shock. If the computer falls, the case and the components could be damaged.
Preface VI Preface 4. A void interference. Keep the computer awa y from high capacity trans formers, electric motors, and other strong mag- netic fields. These can hinder proper p erformance and damage you r data. 5. T ake care when using peripheral devices .
Preface VII Preface Battery Precautions • Only use batteries designed for thi s computer . The wrong battery type may explode, leak or damage the computer . • Rechar ge the batt eries using the note book’ s system. Incorrect rechar ging may make the bat tery explode.
Preface VIII Preface Related Documents You may also need to consult the foll owing manual for addi tional information: User’s Manual on CD This describes the notebook PC’s features and the procedures for operating the computer and its RO M-based setup pro- gram.
Preface IX Preface Contents Introduction .............................................. 1-1 Overview ......................................................................................... 1-1 System Specifica tions .................................
Preface X Preface Removing the LCD Panel ............................................................. 2-29 Removing the Camera Module ..................................................... 2-30 Removing the Bluetooth/WLAN Antennas ....................
Preface XI Preface VGA DRAM 1 of 2 - Termination ............................................... B-34 VGA DRAM 2 of 2 ...................................................................... B-35 Mobility M9-P POW .......................................
Preface XII Preface.
Introduction Overview 1 - 1 1.Introduction 1: Introduction Overview This manual covers the information you need to service or upgrade the D470V/D480V series notebook computer. Infor- mation about operating th e computer (e.g. gett ing started, and the Setup utility) is in the User’s Manual .
Introduction 1 - 2 System Specifications 1.Introduction System Specifications Feature Specification Processor Typ es Intel Pentium® 4 Processor (478-pin) FC-PGA2 Package ( µ 0.13) 0.13 Micron Process T echnology , 512KB On-die L2 Cache & 800MHz Front Side Bus - 2.
Introduction System Specifications 1 - 3 1.Introduction Keyboard “WinKey” keyboard, Multi-Language, Full-size with nu meric pad Pointing Device Built-in T ouchPa d (scrolling ke y functionality integrated) Audio AC'97 compliant interface 3D stereo enhanced sound system Compatible Sound-Blaster PRO™ S/PDIF Digital output (5.
Introduction 1 - 4 System Specifications 1.Introduction Environmental Spec T emperature Operating: 5 ° C ~ 35 ° C Non-Operating: -20°C ~ 60°C Relative Humidity 20% ~ 80% 10% ~ 90% Physical Dime nsions 393 (w) x 275 (d) x 37.5 (h) mm Weight Around 3.
Introduction External Locator - Top View 1 - 5 1.Introduction External Locator - Top View Figure 1 Top View 1. Optional PC Camera 2. LCD 3. Built-In Microphone 4. LED Power & Communication Indicators 5. LED S tatus Indicators 6. Hot-Key buttons 7.
Introduction 1 - 6 External Locator - Front & Left Side Views 1.Introduction External Locator - Front & Left Side Views Figure 2 Front View 1. LCD Latches 2. Consumer In frared T ran sceiver (functions with optional TV T uner) 3. Mini IEEE 1394 Port 4.
Introduction External Locator - Right Side & Rear Views 1 - 7 1.Introduction External Locator - Right Side & Rear Views 1 Figure 4 Right Side View 1. Security Lock Slot Figure 5 Rear View 1. V ent 2. DC-In Jack 3. 2 * USB 2.0/1.1 Ports 4. External Monitor (CRT) Port 5.
Introduction 1 - 8 External Locator - Bottom View 1.Introduction External Locator - Bottom View Figure 6 Bottom View 1. V ent/Fan Intake 2. Battery Cover 3.
Introduction Mainboard Overview - Top (Key Parts) 1 - 9 1.Introduction Mainboard Overview - Top (Key Parts) Figure 7 Mainboard Top Key Parts 1. PC Card Assembly 2. Northbridge - SiS 648FX (839 mBGA) 3. Southbridge - SiS 963 (371 mBGA) 4. LAN Realtek RTL8100C (R TL 81 10S) 5.
Introduction 1 - 10 Mainboard Overview - Bottom (Key Parts) 1.Introduction Mainboard Overview - Bottom (Key Parts) Figure 8 Mainboard Bottom Key Parts 1. CPU Socket (no CPU installed) 2. Memory Slots (no memory installed) 3. CardBus ENE 1410 4. ALC650 - Audio Codec 5.
Introduction Mainboard Overview - Top (Connectors) 1 - 11 1.Introduction Mainboard Overview - Top (Connectors) Figure 9 Mainboard Top Connectors 1. Modem Cable Connector (CN1) 2. LCD (and Inverter) Connector (JLCD1) 3. Video Camera Cable Connector (JCCD1) 4.
Introduction 1 - 12 Mainboard Overview - Bottom (Connectors) 1.Introduction Mainboard Overview - Bottom (Connectors) Figure 10 Mainboard Bottom Connectors 1. Wireless LAN Connector (JWL1) 2. DDR Fan Cable Connector (JF AN3) 3. CD-ROM Device Connector (JCDROM1) 4.
Disassembly Overview 2 - 1 2.Disassembly 2: Disassembly Overview This chapter provides step-by-step instructions for disassembling the D470V/D480V series notebook’s parts and sub- systems. When it comes to reassembly, revers e the procedures (unles s otherwise indicated).
Disassembly 2 - 2 Overview 2.Disassembly NOTE : All disassembly procedures assu me that the system is turned OFF , and disconnected from any power supply (the battery is removed too). Maintenance Tools The following tools are recommende d when working on the notebook PC: • M3 Philips-head screwdriver • M2.
Disassembly Overview 2 - 3 2.Disassembly Maintenance Precautions The following precautions are a reminder. To avoid personal injury or damage to the computer while performing a re- moval and/or replacement job, take the following precautions: 1. Don't drop it .
Disassembly 2 - 4 Disassembly Steps 2.Disassembly Disassembly Steps The following table lists the disassembly steps, a nd on which page to find th e related information. PLEASE PERFORM THE DISASSEMBLY STEPS IN THE ORDER INDICATED. To remove the Battery: 1.
Disassembly Disassembly Steps 2 - 5 2.Disassembly To remove the T op Case Module: 1. Remove the battery page 2 - 8 2. Remove the HDD page 2 - 9 3. Remove the system memory page 2 - 10 4. Remove the CD device page 2 - 12 5. Remove the Bluetooth module page 2 - 14 6.
Disassembly 2 - 6 Disassembly Steps 2.Disassembly To remove the Mainboard: 1. Remove the battery page 2 - 8 2. Remove the HDD page 2 - 9 3. Remove the system memory page 2 - 10 4. Remove the CD Device page 2 - 12 5. Remove the Bluetooth module page 2 - 14 6.
Disassembly Disassembly Steps 2 - 7 2.Disassembly To remove the Inverter: 1. Remove the battery page 2 - 8 2. Remove the HDD page 2 - 9 3. Remove the system memory page 2 - 10 4. Remove the CD Device page 2 - 12 5. Remove the Bluetooth module page 2 - 14 6.
Disassembly 2 - 8 Removing the Battery 2.Disassembly Removing the Battery 1. Turn the computer off . 2. Remove screws - ( Figure 1 a ) from the battery cover , and remove the cover . 3. Carefully (use a small screwdriver) disconnect the battery cable at point .
Disassembly Removing the Hard Disk Drive Assembly 2 - 9 2.Disassembly Removing the Hard Disk Drive Assembly The hard disk drive is mounted in a removable case and can be taken out to accommodate other 2.5" IDE hard disk drives with a height of 9.
Disassembly 2 - 10 Removing the System Memory (RAM) 2.Disassembly Removing the System Memory (RAM) The computer has two memory sockets for 200 pin Small Outline Dual In-lin e Memory Modules (SO-DIMM) supporting DDR 200/266 MHz. The main memory can be expanded up to 1024MB.
Disassembly Removing the System Memory (RAM) 2 - 11 2.Disassembly 5. Gently pull the two release latches ( & ) on the sides of the memory socket toward the sides of the co mputer . 6. The module will pop-up, and you can remove it. 7. Repeat the process for the second module if necessary .
Disassembly 2 - 12 Removing the CD Device 2.Disassembly Removing the CD Device 1. Turn off the computer and remove the battery ( page 2 - 8 ). 2. Remove screws - from the memory socket cover . 3. Carefully lift up the memory socket cover (a fan cabl e is still attached to the mainboard and yo u can discon- nect it).
Disassembly Removing the CD Device 2 - 13 2.Disassembly 4. Use a screwdriver to carefully push the CD devi ce asse mbly out of the computer at point . 5. Insert the new device and carefully slide it into the comp uter (the device only fits one wa y . DO NOT FORCE IT ; The screw holes should line up.
Disassembly 2 - 14 Removing the Bluetooth Module 2.Disassembly Removing the Bluetooth Module 1. Turn off the computer and remove the battery ( page 2 - 8 ). 2. Remove screws & from the Bluetooth module cover . 3. Carefully lift up the Bluetooth module cover of f the computer .
Disassembly Removing the Wireless LAN Module 2 - 15 2.Disassembly Removing the Wireless LAN Module 1. Turn off the computer and remove the battery ( page 2 - 8 ). 2. Remove screws - from the memory socket cover . 3. Carefully lift up the memory socket cover (a fan cabl e is still att ached to the mainboard and you can disco n- nect it).
Disassembly 2 - 16 Removing the Processor 2.Disassembly Removing the Processor 1. Turn off the computer and remove the battery ( page 2 - 8 ). 2. Remove screws - from the memory socket cover . 3. Carefully lift up the memory socket cover (a fan cabl e is still attached to the mainboard and yo u can discon- nect it).
Disassembly Removing the Processor 2 - 17 2.Disassembly 6. Remove screws & and lift the CPU holder of f the computer . 7. Unlock the processor by raising lever . 8. Lift the CPU off the compu ter . 1 2 3 4 5 Figure 10 Processor Removal (cont’d) a.
Disassembly 2 - 18 Removing the Keyboard & Center Cover 2.Disassembly Removing the Keyboard & Center Cover 1. Turn off the computer and remove the battery ( page 2 - 8 ). 2. Press the four keyboard latches - at the top of t he keyboar d to elevate the keyboard from its normal position (you may need to use a small screwdriver to do this).
Disassembly Removing the LCD Assembly 2 - 19 2.Disassembly Removing the LCD Assembly 1. Turn off the computer and remove the battery ( page 2 - 8 ), HDD ( page 2 - 9 ), memory ( page 2 - 10 ), CD devi.
Disassembly 2 - 20 Removing the LCD Assembly 2.Disassembly 4. Remove the three hinge covers . 5. Disconnect cables & . 6. Carefully ease up the LCD assembly (be very carefu l with the antenna cables for the WLAN and Blue tooth modules). 1 2 3 4 Figure 13 LCD Assembly Removal (cont’d) a.
Disassembly Removing the Top Case Module 2 - 21 2.Disassembly Removing the Top Case Module 1. Turn off the computer and remove the battery ( page 2 - 8 ), HDD ( page 2 - 9 ), memory ( page 2 - 10 ), C.
Disassembly 2 - 22 Removing the TouchPad 2.Disassembly Removing the TouchPad 1. Turn off the computer and remove the battery ( page 2 - 8 ), HDD ( page 2 - 9 ), memory ( page 2 - 10 ), CD d evice ( pa.
Disassembly Removing the LED Board 2 - 23 2.Disassembly Removing the LED Board 1. Turn off the computer and remove the battery ( page 2 - 8 ), HDD ( page 2 - 9 ), memory ( page 2 - 10 ), CD device ( p.
Disassembly 2 - 24 Removing the Modem 2.Disassembly Removing the Modem 1. Turn off the computer and remove the battery ( page 2 - 8 ), HDD ( page 2 - 9 ), memory ( page 2 - 10 ), CD d evice ( page 2 -.
Disassembly Removing the Mainboard 2 - 25 2.Disassembly Removing the Mainboard 1. Turn off the computer and remove the battery ( page 2 - 8 ), HDD ( page 2 - 9 ), memory ( page 2 - 10 ), CD device ( p.
Disassembly 2 - 26 Removing the Sub Woofer 2.Disassembly Removing the Sub Woofer 1. Turn off the computer and remove the battery ( page 2 - 8 ), HDD ( page 2 - 9 ), memory ( page 2 - 10 ), CD d evice .
Disassembly Removing the Card Reader Assembly 2 - 27 2.Disassembly Removing the Card Reader Assembly 1. Turn off the computer and remove the battery ( page 2 - 8 ), HDD ( page 2 - 9 ), memory ( page 2.
Disassembly 2 - 28 Removing the PCMCIA Module 2.Disassembly Removing the PCMCIA Module 1. Turn off the computer and remove the battery ( page 2 - 8 ), HDD ( page 2 - 9 ), memory ( page 2 - 10 ), CD d .
Disassembly Removing the Inverter 2 - 29 2.Disassembly Removing the Inverter 1. Turn off the computer and remove the battery ( page 2 - 8 ), HDD ( page 2 - 9 ), memory ( page 2 - 10 ), CD device ( pag.
Disassembly 2 - 30 Removing the LCD Panel 2.Disassembly Removing the LCD Panel 1. Turn off the computer and remove the battery ( page 2 - 8 ), HDD ( page 2 - 9 ), memory ( page 2 - 10 ), CD d evice ( .
Disassembly Removing the Camera Module 2 - 31 2.Disassembly Removing the Camera Module 1. Turn off the compu ter and remove the battery ( pag e 2 - 8 ), HDD ( page 2 - 9 ), memory ( page 2 - 10 ), CD .
Disassembly 2 - 32 Removing the Bluetooth/WLAN Antennas 2.Disassembly Removing the Bluetooth/WLAN Antennas 1. Turn off the computer and remove the battery ( page 2 - 8 ), HDD ( page 2 - 9 ), memory ( .
Part Lists A-1 A.Part Lists Appendix A: Part Lists This appendix breaks down the D470V/D480V series notebook’s construction into a series of illustrations. The compo- nent part numbers are indicated in the tables opposite the drawings. Note: This section indicates the manufacturer’s part numbers.
Part Lists A - 2 Part List Illustration Location A.Part Lists Part List Illustration Location The following table indicates where to fi nd the appropriate part list illustration.
Part Lists Top (D470V) A - 3 A.Part Lists Top (D470V) Figure 1 Top (D470V).
Part Lists A - 4 Bottom (D470V) A.Part Lists Bottom (D470V) Figure 2 Bottom (D470V) (長卡時不使用) 無鉛 無鉛 無鉛.
Part Lists LCD 17" (D470V) A - 5 A.Part Lists LCD 17" (D470V) Figure 3 LCD 17" (D470V).
Part Lists A - 6 CD-ROM Drive (D470V) A.Part Lists CD-ROM Drive (D470V) Figure 4 CD-ROM Drive (D470V).
Part Lists CD-RW Drive (D470V) A - 7 A.Part Lists CD-RW Drive (D470V) Figure 5 CD-RW Drive (D470V).
Part Lists A - 8 DVD-ROM Drive (D470V) A.Part Lists DVD-ROM Drive (D470V) Figure 6 DVD-ROM Drive (D470V).
Part Lists Combo Drive (D470V) A - 9 A.Part Lists Combo Drive (D470V) Figure 7 Combo Drive (D470V).
Part Lists A - 10 Ha rd Disk Drive (D470V) A.Part Lists Hard Disk Drive (D470V) Figure 8 HDD Drive (D470V).
Part Lists Top (D480V) A - 11 A.Part Lists Top (D480V) Figure 9 Top (D480V).
Part Lists A - 12 Bottom (D480V) A.Part Lists Bottom (D480V) Figure 10 Bottom (D480V) (長卡時不使用) 無鉛 無鉛 無鉛.
Part Lists LCD 17" (D480V) A - 13 A.Part Lists LCD 17" (D480V) Figure 11 LCD 17" (D480V).
Part Lists A - 14 CD-ROM Drive (D480V) A.Part Lists CD-ROM Drive (D480V) Figure 12 CD-ROM Drive (D480V).
Part Lists CD-RW Drive (D480V) A - 15 A.Part Lists CD-RW Drive (D480V) Figure 13 CD-RW Drive (D480V).
Part Lists A - 16 DVD-ROM Drive (D480V) A.Part Lists DVD-ROM Drive (D480V) Figure 14 DVD-ROM Drive (D480V).
Part Lists Combo Drive (D480V) A - 17 A.Part Lists Combo Drive (D480V) Figure 15 Combo Drive (D480V).
Part Lists A - 18 Ha rd Disk Drive (D480V) A.Part Lists Hard Disk Drive (D480V) Figure 16 HDD Drive (D480V).
Schematic Diagrams B-1 B.Schematic Diagrams Appendix B:Schematic Diagrams This appendix has circ uit diagrams of the D470V/D480V notebook’s PCB’s. The following table indicates where to find the appropriate schematic diagram.
Schematic Diagrams B - 2 System Block Dia g ram (71-D40U0-D03) B.Schematic Diagrams System Block Diagram Sheet 1 of 42 System Block Diagram MODEM RGB PCI I/F A Wireless LAN VB-LINK USB 2.
Schematic Diagrams Socket 478 1 of 2 (71-D40U0-D03) B - 3 B.Schematic Diagrams Socket 478 1 of 2 Sheet 2 of 42 Socket 478 1 of 2 VCC_CORE VCC_CORE VCC_CORE VCC_CORE VCC_CORE +2.5V +3VS HBPRM5# 3 HBPRM4# 3 HBPM1# 3 HA#[3..31] 5 HD#[0..63] 5 RS#0 5 RS#1 5 RS#2 5 PM_CPUPERF# 15 H_DPSLP# 29,36 HBPM0# 3 HREQ#[0.
Schematic Diagrams B - 4 Socket 478 & ITP 2 of 2 (71-D40U0-D03) B.Schematic Diagrams Socket 478 & ITP 2 of 2 VCC_CORE VCC_CORE VCC_CORE +3V +3V VDD3 VCC_CORE VCC_CORE VCC_CORE VCCVID INTR 15 N.
Schematic Diagrams Clock Generator (71-D40U0-D03) B - 5 B.Schematic Diagrams Clock Generator Sheet 4 of 42 Clock Generator VTT +2.5VS +3VS +3VS +3VS +3VS +3VS +2.
Schematic Diagrams B - 6 M648FX-1 (Host/AGP) 1 of 4 (71-D40U0-D03) B.Schematic Diagrams M648FX-1 (Host/AGP) 1 of 4 Sheet 5 of 42 M648FX-1 (Host/AGP) 1 of 4 AAD12 +3VS SB_STB ADEVSEL# 30 SB_STB# 30 DBI_LOW 30 DEFER# DRDY# HIT# 3 HREQ#1 AGPCLK DBI_HI HD#45 HA#5 HD#49 DBI#[0.
Schematic Diagrams M648FX-2 (Memory for DDR) 2 of 4 (71-D40U0-D03) B - 7 B.Schematic Diagrams M648FX-2 (Memory for DDR) 2 of 4 Sheet 6 of 42 M648FX-2 (Memory for DDR) 2 of 4 MA3 C593 0.01UF DQM1 RP45 8P4R-10 1 8 2 7 3 6 4 5 /RMD48 /RMD54 MD55 DQS6 MD37 MD49 MD41 MD53 MA12 C587 0.
Schematic Diagrams B - 8 M648FX-3 & CRT Out 3 of 4 (71-D40U0-D03) B.Schematic Diagrams M648FX-3 & CRT Out 3 of 4 +3VS +1.8VS +1.8VS +3VS +3VS +1.8VS +3VS +3VS +3VS +3VS +3VS +3VS +3VS +3VS +5VS +5VS +5VS +3VS +5VS +5VS ZCLK0 4 ZUREQ 13 ZDREQ 13 ZSTB0 13 ZSTB#0 13 ZSTB1 13 ZSTB#1 13 ZAD[0.
Schematic Diagrams M648FX-4 (Power) 4 of 4 (71-D40U0-D03) B - 9 B.Schematic Diagrams M648FX-4 (Power) 4 of 4 IVDD VTT +1.8VS +3V +2.5V +1.8VS +3V +1.8VS AUX_IVDD +2.5V VTT +1.8VS AGP1.5/1.8 VTT VTT +2.5V AGP1.5/1.8 +1.8V +3V +3V +1.8VS +3VS +1.8VS +1.
Schematic Diagrams B - 10 DDR Memory DI MM (71-D40U0-D03) B.Schematic Diagrams DDR Memory DIMM VDDSPD +2.5V +3VS +2.5V +2.5V +2.5V +2.5V +2.5V +2.5V +2.5V VDDSPD VDDSPD +2.5V /RCS#[0..5] 6,8 DDRCLK#[0..5] 4 DDRCLK[0..5] 4 /RDQM[0..7] 6,8 /RMA[0..14] 6,8 /RDQS[0.
Schematic Diagrams DDR SSTL-2 Termination (71-D40U0-D03) B - 11 B.Schematic Diagrams DDR SSTL-2 Termination +1.25VS +1.25VS +1.25VS +1.25VS +1.25VS /RDQS[0.
Schematic Diagrams B - 12 LVDS Interface (SiS 302LV) (71-D40U0-D03) B.Schematic Diagrams LVDS Interface (SiS302LV) Sheet 11 of 42 LVDS interface (SiS302LV) +5VS +3VS +3VS +3VS +3VS +3VS +3VS +3VS +3VS.
Schematic Diagrams Panel Con & LED Indicato r (71-D40U0-D03) B - 13 B.Schematic Diagrams Panel Con & LED Indicator Sheet 12 of 42 Panel Con & LED Indicator 12V LCDVCC +3VS LCDVCC VIN LCDVC.
Schematic Diagrams B - 14 963-1 (PCI/IDE/HyperZi p) 1 of 4 (71-D40U0-D03) B.Schematic Diagrams 963-1 (PCI/IDE/HyperZip) 1 of 4 Sheet 13 of 42 963-1 (PCI/IDE/ HyperZip) 1 of 4 +1.8VS +1.8VS +1.8VS +3VS +3VS +3VS +3VS +3V +3V IDECS#A[0..1] 14 IDESAA[0..
Schematic Diagrams 963-2 (Misc Signals) 2 of 4 (71-D40U0-D03) B - 15 B.Schematic Diagrams 963-2 (Misc Signals) 2 of 4 Sheet 14 of 42 963-2 (Misc Signals) 2 of 4 +3VS +3VS +3VS RTCVDD +3V +3V +3V +3V +.
Schematic Diagrams B - 16 963 -3 (USB I/F) 3 of 4 (71-D40U0-D03) B.Schematic Diagrams 963-3 (USB I/F) 3 of 4 Sheet 15 of 42 963-3 (USB I/F) 3 of 4 +1.8V +3VS +3VS +3VS +3V +3VS +3V +3VS UCLK48M 4 PHY_.
Schematic Diagrams 963-4 (Power & RTC) 4 of 4 (71-D40U0-D03) B - 17 B.Schematic Diagrams 963-4 (Power & RTC) 4 of 4 Sheet 16 of 42 963-4 (Power & RTC) 4 of 4 +3VS +1.8VS +1.8V VTT +1.8VS +3VS VTT +3V +1.8V +3V RTCVDD BAT +3VS +3V +3VS +2.5V +3V +3VS +1.
Schematic Diagrams B - 18 HDD/Combo Connect or (71-D40U0-D03) B.Schematic Diagrams HDD/Combo Connector Sheet 17 of 42 HDD/Combo Connector +3VS +3VS +5VS +5VS FDDVCC +5VS FDDVCC +5VS +5VS +5VS CBLIDB 1.
Schematic Diagrams USB Port (71-D40U0-D03) B - 19 B.Schematic Diagrams USB Port Sheet 18 of 42 USB Port +5V RFVCC BTVCC +3V +5V +5V +3VS +3V +5V USBVCC0 USBVCC1 USBVCC0 USBVCC1 USBVCC2 +5V USBVCC2 OC0.
Schematic Diagrams B - 20 PCMCIA ENE141 0 (71-D40U0-D03) B.Schematic Diagrams PCMCIA ENE1410 Sheet 19 of 42 PCMCIA ENE1410 +3V +3V B_VPP B_VCC B_VCC B_VCC +3V +3V +3V +3V AD[0.
Schematic Diagrams PCMCIA Power & MDC Interface (71-D40U0-D03) B - 21 B.Schematic Diagrams PCMCIA Power & MDC Interface Sheet 20 of 42 PCMCIA Power & MDC Interface +5V +12V B_VCC B_VPP +3V.
Schematic Diagrams B - 22 1394 PHY TSB41L V01 (71-D40U0-D03) B.Schematic Diagrams 1394 PHY TSB41LV01 Sheet 21 of 42 1394 PHY TSB41LV01 PHY3V PHY3V PHY3V +3VS PHY3V PHY3V PHY3V VDD5 +3V PHY_D0 16 PHY_D.
Schematic Diagrams LPC Super I/O (71-D40U0-D03) B - 23 B.Schematic Diagrams LPC Super I/O Sheet 22 of 42 LPC Super I/O +3VS +3VS +3VS +3VS +3VS +3VS +5VS +5VS FIRVCC FIRGND FIRGND FIRVCC +3VS +5VS +3V.
Schematic Diagrams B - 24 LPT/COM Port (71-D40U0-D03) B.Schematic Diagrams LPT/COM Port Sheet 23 of 42 LPT/COM Port VDD3 +5V +5V VDD5 +5V VDD5 +5V CTSA# 22 DCDA# 22 DSRA# 22 DTRA 22 RTSA# 22 SOUTA 22 SINA 22 RIA# 22 PACK# 22 PBUSY 22 PPE 22 PSLCT 22 PSTB# 22 PATFD# 22 PSLIN# 22 PME# 19,22,24,25 PINIT# 22 PPERR# 22 PD[0.
Schematic Diagrams LPC H8 (71-D40U0-D03) B - 25 B.Schematic Diagrams LPC H8 Sheet 24 of 42 LPC H8 VDD5 3VH8 3VH8 3VH8 +5VS 3VH8 3VH8 3VH8 VDD3 VDD3 3VH8 3VH8 +5VS 3VH8 VDD5 3VH8 +5VS 3VH8 3VH8 3VH8 BA.
Schematic Diagrams B - 26 LAN RTL8100S(B)-32/RTL8100C (71-D40U0-D03) B.Schematic Diagrams LAN RTL8100S(B)-32/RTL8100C LANVCC2.5 +3VS LANVDD3 LANVDD3 LAN_V_12P LANVDD3 LAN_AVDDH LANVDD3 LANVCC2.5 LANVDD3 LAN_AVDDL LAN_DVDD LAN_DVDD LANVCC2.5 LANVDD3 +3V VDD3 LANVDD3 LANVCC1.
Schematic Diagrams Audio Codec ALC650 (71-D40U0-D03) B - 27 B.Schematic Diagrams Audio Codec ALC650 Sheet 26 of 42 Audio Codec ALC650 VDDA +3VS AGND VDDA AGND AGND AGND AGND AGND AGND AGND AGND AGND A.
Schematic Diagrams B - 28 Au dio Out & Off Board Connectors (71-D40U0-D03) B.Schematic Diagrams Audio Out & Off Board Connectors Sheet 27 of 42 Audio Out & Off Board Connectors AGND VDDA A.
Schematic Diagrams System Power Control (71-D40U0-D03) B - 29 B.Schematic Diagrams System Power Control Sheet 28 of 42 System Power Control +3V +3V +3V +3V +12V +5V +5VS +12V +3VS +3V +2.
Schematic Diagrams B - 30 Fan Control and Sp eedStep (71-D40U0-D03) B.Schematic Diagrams Fan Control and SpeedStep +5V +3V +5V +5V +3VS +3VS +5VS +1.8VS +3V +3V +3V +3V +5V +3V +3V +3V +5V +5V +3V FAN.
Schematic Diagrams Mobility M10-P (71-D40U0-D03) B - 31 B.Schematic Diagrams Mobility M10-P AGP1.5/1.8 +3VS +3VS +3VS +3VS +1.8VS +3VS +3VS +3VS AGP1.5/1.8 AGP1.5/1.8 +3VS +3VS +3VS AGPCLKATI 4 PCIRST# 9,10,13,14,20,22,24 ST[0..2] 5 AAD[0..15] 5,10 AAD18/AHSYNC 5 AAD16/VADE 5,10 AAD17/AVSYNC 5 AAD[19.
Schematic Diagrams B - 32 Mobili ty M10-P Me m A/B (71-D40U0-D03) B.Schematic Diagrams Mobility M10-P Mem A/B +1.8VS +3VS +2.5V_MEM +2.5V_MEM +2.5V_MEM +2.
Schematic Diagrams VGA DDR DRAM Channel A (71-D40U0-D03) B - 33 B.Schematic Diagrams VGA DDR DRAM Channel A +2.5V_MEM +2.5V_MEM +2.5V_MEM +1.25VS +2.5V_MEM +2.5V_MEM +2.5V_MEM +2.5V_MEM +1.25VS MEM_DIMA0 31 MEM_DIMA1 31 MDA[63..0] 31,34 QSA[0..7] 31 DQMA#[0.
Schematic Diagrams B - 34 VGA DDR DRAM Cha nnel B (71- D40U0-D03) B.Schematic Diagrams VGA DDR DRAM Channel B +2.5V_MEM +2.5V_MEM +2.5V_MEM +2.5V_MEM +2.5V_MEM +1.25VS +2.5V_MEM +2.5V_MEM +1.25VS MEM_DIMB0 31 MEM_DIMB1 31 MDB[63..0] 31,34 DQMB#[63..0]31 QSB[0.
Schematic Diagrams VGA DDR DRAM Termination (71-D40U0-D03) B - 35 B.Schematic Diagrams VGA DDR DRAM Termination MDA[63..0] 31,32 MEM_MDA[63..0] 32 MDB[63.
Schematic Diagrams B - 36 Mobili ty M10-P Power (71-D40U0-D03) B.Schematic Diagrams Mobility M10-P Power +1.8VS +1.8VS AGP1.5/1.8 +3VS +3VS +1.2VS +2.5V_MEM +1.5VS +1.8VS +1.8VS +1.8VS +2.5VS +1.8VS +2.5V_MEM +2.5VS L35 BK2125HS121 1 2 C538 1U C534 10U(0805) C537 1U C125 0.
Schematic Diagrams VCORE (71-D40U0-D03) B - 37 B.Schematic Diagrams VCORE VCC_CORE VCC12 VIN VCC_CORE VCC12 VIN +5V VIN VIN VCC5_DRV VCC5_DRV VIN VIN VCC5_DRV SYS5V SYS5V SYS5V VTT +3V SYS5V V_ADJ 15 .
Schematic Diagrams B - 38 +1.2V, +1.5 V (71-D40U0-D03) B.Schematic Diagrams +1.2V, +1.5V SYS5V VIN SYS5V +1.2VS 1.5V +1.5V SYS5V +1.5VS +12V +1.5V DD_ON# 38,39 SUS- 38 1.2VS SUS- SUS- PQ28 IRF7811AV 4 6 2 5 7 3 1 8 PR125 14.2K 1% 1 2 PQ27 IRF7807D1 4 6 2 5 7 3 1 8 PC156 1U 1 2 + PC43 220U/4V 1 2 PC157 0.
Schematic Diagrams +2.5V, +1.25V (7 1-D40U0-D03) B - 39 B.Schematic Diagrams +2.5V, +1.25V Sheet 38 of 42 +2.5V, +1.25V +3V 1.8VS 2.5V +1.8VS +1.8V +3VS SYS3V SYS3V VCCVID SYS5V 3VH8 VCCVID VDDP 2.5V +2.5V SYS5V VIN SYS5V +1.25VS VDD5 SUSB- 40 PWRGOOD_VID 36 VIDPWRGD 2 DD_ON# 37,39 SUS- 37 SUSB- 40 1.
Schematic Diagrams B - 40 +3V, +5V, + 12V (71-D40U0-D03) B.Schematic Diagrams +3V, +5V, +12V Sheet 39 of 42 +3V, +5V, +12V SYS5V SYS3V VIN VIN1 VL VL VA VIN VDD3 VDD3 VDD5 12V +2.
Schematic Diagrams Charger (71-D40U0-D03) B - 41 B.Schematic Diagrams Charger VA VIN VA VIN VB VB SYS3V VA VDD5 SYS3V SYS3V SYS3V VA VA SYS3V SYS3V SYS3V BAT_SMCLK 24 BAT_SMDATA 24 BATTEMP 24 SUSB- 38 CURSEN24 CHAGEN 24 BATVOLT 24 PSON 28,29 SUSB- 38 I_CHG 24 INCURSEN 24 TEST 36,39 VBB VBB VREF2.
Schematic Diagrams B - 42 S/W Board & Hot Key (71-D40U0-D03) B.Schematic Diagrams S/W Board & Hot Key VIN_10 PWRS_10 PWRS_10 WEB2#_10 WEB0#_10 VIN_10 LID_SW#_10 WEB1#_10 WEB1#_10 WEB0#_10 WEB2.
Schematic Diagrams TouchPad & SwitchBoard (71-D40U0-D03) B - 43 B.Schematic Diagrams TouchPad & SwitchBoard VCC5_T VCC5_T VCC5_T VCC5_T VCC5_T VCC5_T SWEB1 HCH STS-05-A 1 3 2 4 VC5 120P SWEB2 .
Schematic Diagrams B - 44 B.Schematic Diagrams.
Een belangrijk punt na aankoop van elk apparaat Clevo D480V (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Clevo D480V heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Clevo D480V vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Clevo D480V leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Clevo D480V krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Clevo D480V bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Clevo D480V kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Clevo D480V . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
