Gebruiksaanwijzing /service van het product CC3710 van de fabrikant Aerus
Ga naar pagina of 24
Installa tion/Oper a tion CC3610 and CC3710 Series Color Camer a C2914M-F (08/05) Pelco Worldwide Headquarters • 3500 Pelco Way, Clovis, CA 93612-5699 USA • www.
[ 2 ] Pelco Manual C2914M-F (08/05) ® Pelco, the Pelco logo, Spectra, Genex, Legacy , Esprit and Camclosure are registered trademarks of Pelco. ™Endura and ExSite are trademarks of Pelco ™DLP is a trademark of T exas Instruments, Inc. ™SuperHAD CCD is a trademark of the Sony Corporation.
Pelco Manual C2914M-F (08/05) [ 3 ] CONTENTS IMPORT ANT SAFETY INSTRUCTIONS ........................................................................................................... 4 REGULA TORY NOTICES .............................................
[ 4 ] Pelco Manual C2914M-F (08/05) This symbol indicates that dangerous voltage constituting a risk of electric shock is present within this unit. This symbol indicates that there are impor- tant operating and maintenance instructions in the literature accompanying this unit.
Pelco Manual C2914M-F (08/05) [ 5 ] REGULA T OR Y NOTICES This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
[ 6 ] Pelco Manual C2914M-F (08/05) DESCRIPTION CC3610 and CC3710 Series cameras are color video cameras with a 1/3-inch CCD imager . All cameras have a direct drive/auto iris lens connector and adjustable back focus, and they accept C and CS lenses. Models CC3610H-6 High resolution (480 TV lines), Exview HAD™ CCD, 0.
Pelco Manual C2914M-F (08/05) [ 7 ] CAMERA LA Y OUT Figure 1. Camera Layout INST ALLA TION Lens Mounting CC3610 and CC3710 Series cameras can use fixed iris, manual iris, auto iris, or direct drive lenses. Cameras are factory-set for CS-mount lenses, but are easily adjusted for C-mount lenses.
[ 8 ] Pelco Manual C2914M-F (08/05) Camera Mounting Mounting points are provided on the top and bottom of the camera and are used to mount the camera on a bracket or tripod. They are designed to accept standard photographic mounting bolts (1/4-inch UNC-20).
Pelco Manual C2914M-F (08/05) [ 9 ] CONNECTIONS CC3610 and CC3710 Series cameras offer standard power and coax video connectors as well as an RJ45-10 connector that combines low voltage power and video (composite or UTP).
[ 10 ] Pelco Manual C2914M-F (08/05) Low V olt age Power Supply Cameras fitted with an automatic-switching low voltage power supply operate at 10.8 to 13.8 VDC (12 VDC -10% +15%) or 20.4 to 27.6 V AC (24 V AC ±15%) at 50/60Hz. Connections and polarity are indicated adjacent to the screw terminals on the rear panel.
Pelco Manual C2914M-F (08/05) [ 11 ] RJ45-10 Connections The RJ45-10 connector allows video (composite and twisted pair) and power connections to be made to the camera using a single Cat5-style cable. NO TE: The PCM150 camera mount is designed for the CC3610 and CC3710 Series camera.
[ 12 ] Pelco Manual C2914M-F (08/05) Ser vice Connection The service connector allows a video monitor to be connected locally to the camera using a 2.5 mm plug to composite video BNC cable.
Pelco Manual C2914M-F (08/05) [ 13 ] CAMERA SETUP Lens Setup and Focus Procedures Video Drive or Direct Drive (DC) Auto Iris Lens 1. Set the ESC switch and AGC switch to OFF . 2. Adjust the lens for the optimum picture. Video Drive Refer to the lens instructions and adjust the lens for the optimum picture (video output level of 1 V peak-to-peak).
[ 14 ] Pelco Manual C2914M-F (08/05) Back F ocus Adjustment The back focus adjustment is located at the front of the camera and is accessible from either side of the case. T o adjust the back focus: 1. Loosen the two back focus locking screws (one on each side).
Pelco Manual C2914M-F (08/05) [ 15 ] Switch Settings NO TE: Under most conditions, no setting of switches will be required. Please read the details of each switch before making any adjustments. AGC (Automatic Gain Control) - Switch Setting 1 Automatically adjusts the image to compensate for low levels of illumination.
[ 16 ] Pelco Manual C2914M-F (08/05) Flickerless - Switch Setting 4 The flickerless setting can reduce the flicker caused by certain lighting conditions. The Electronic Shutter Control must be off for the correct operation of the flickerless function and is therefore automatically disabled.
Pelco Manual C2914M-F (08/05) [ 17 ] Camera Synchronization When using more than one camera power supply , a brief vertical roll may occur on the monitor when a camera view is switched. T o eliminate this vertical roll, it is necessary for the cameras to be synchronized.
[ 18 ] Pelco Manual C2914M-F (08/05) SPECIFICA TIONS GENERAL Imaging Device: 1/3-inch interline transfer CCD Picture Elements CC3710H and CC3610H: NTSC 768 (H) x 494 (V); P AL 752 (H) x 582 (V) CC3710.
Pelco Manual C2914M-F (08/05) [ 19 ] MECHANICAL Lens Mount: C/CS mount (adjustable) Camera Mount: 1/4 –inch UNC-20 screw , top or bottom of camera housing ENVIR ONMENT AL Operating T emperature: 14.
[ 20 ] Pelco Manual C2914M-F (08/05).
Pelco Manual C2914M-F (08/05) [ 21 ].
[ 22 ] Pelco Manual C2914M-F (08/05) If the goods are to be sent by a FREIGHT FORWARDER, send the goods to: Pelco c/o Expeditors 473 Eccles Avenue South San Francisco, CA 94080 USA Phone: 650-737-1700.
Pelco Manual C2914M-F (08/05) [ 23 ] REVISION HIST ORY Manual # Date Comments C2914M 05/04 Original version. C2914M-A 07/04 Lens connector pin out changed. C2914M-B 09/04 Clarified instructions for UTP use. C2914M-C 1 1/04 Added UL warning for high-voltage models.
[ 24 ] Pelco Manual C2914M-F (08/05) Worldwide Headquarters 3500 Pelco Way Clovis, California 93612 USA USA & Canada Tel: 800/289-9100 Fax: 800/289-9150 International Tel: 1-559/292-1981 Fax: 1-559/348-1120 www.pelco.com www.pelco.com www.pelco.com www.
Een belangrijk punt na aankoop van elk apparaat Aerus CC3710 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Aerus CC3710 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Aerus CC3710 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Aerus CC3710 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Aerus CC3710 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Aerus CC3710 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Aerus CC3710 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Aerus CC3710 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
