Gebruiksaanwijzing /service van het product SRT 9000 van de fabrikant Code Alarm
Ga naar pagina of 26
1 IMPORT ANT NOTE: The operation of the Security and Convenience System as described in this manual is applicable to most vehicles. However, due to the configuration of some vehicles, some functions AND/OR SAFETY PRECAUTIONS may not apply . Please see your installing dealer for more information.
2 T able of Contents 2-Way Transmitter Main Display Screen ........................................................................................ 4 2-way transmitter button descriptions and locations Charging the Battery ............................
3 T able of Content s, continued Using Y our Remote Control, continued ................................................................................
4 2-Way Transmitter Main Display Screen 2-Way Transmitter Button Descriptions / Locations OLED MAIN DISPLAY SCREEN Battery Level Car Jacking In Range Indicator Door Lock Door Unlock Alarm Status T.
5 Charging the Battery Y our 2-way transmitter is powered by a built-in 3.7V lithium polymer battery. When the screen displays low battery or the icon is flashing it is time to recharge your remote transmitter. Charge the transmitter battery using the supplied plug-in home charger.
6 When the remote start “ ” icon is flashing press the “ ” icon button to display the remote start status. When the count down timer “ ” icon is flashing press the “ ” icon button to display the count down timer. Use buttons numbered 1-4 to start, stop or exit the countdown timer mode.
7 Vehicle Menu Options on the 2-Way Transmitter The 2-way transmitter allows multiple operations from the main four buttons by scrolling through the menu screens and selecting the desired function. T o scroll through the menu screens press the “ ” switch up until the desired function is displayed.
8 Settings for the 2-Way Transmitter Button Beeps The 2-way transmitter buttons will respond with a short “beep” sound when pressed. T o turn this feature on or off scroll to menu 1 and select BUTTON BEEPS, then use the corresponding transmitter buttons to make your selections.
9 Settings for the 2-Way T ransmitter , continued Power Save Mode While in power save mode the 2-way transmitter will not attempt to communicate with the vehicle to conserve battery life. This feature is useful when leaving the vehicle for extended periods of time or if using the secondary 1 way transmitter .
10 Settings for the 2-Way T ransmitter , continued Lighting for 2-Way Transmitter This setting adjusts the amount of time the 2-way transmitter’s display will remain active without activity .
11 Count Down Timer The 2-way transmitter is equipped with a count down timer that will sound an alert once the time reaches 0:00. T o adjust the count down time, scroll to menu 3 and select COUNT DOWN TIMER, then use the corresponding transmitter buttons to make your selections.
12 Name of Channel Setting The 2-way transmitter’s AUX output names can be modified to reflect the accessory in which it controls, such as window automation or garage door control. T o edit the AUX output name, scroll to menu 5, then use the corresponding transmitter buttons to make your selections.
13 Arming the Security System T o arm the system, exit the vehicle, close all doors, then press the LOCK button on the remote control. The system will sound 1 time and the parking lights will flash 1 time, indicating the system is armed, has locked the doors (if equipped and connected) and activated the starter disable feature.
14 Attempted Intrusion Identification This system will inform you if an intrusion attempt has occurred while you were away from the vehicle. If an intrusion attempt occurred, the system will sound 4 times and the parking lights will flash 3 times when disarming the system.
15 Using Your Remote Control, continued Activating Optional AUX 1 (Optional) If this feature is enabled on your system, scroll to vehicle menu 3 and press the AUX 1 button OR simultaneously press and release the LOCK and TRUNK buttons on the remote control to activate an optional feature.
16 Using Valet Mode Using Valet Mode T o engage valet mode: 1. Turn the ignition key to the ON position. 2. Press and hold the emergency override button.
17 Using Y our Remote V ehicle Starter , continued Preheating or Precooling the Vehicle’s interior Before exiting the vehicle, set the temperature controls to the desired setting and operation. After the system starts the vehicle, the heater or air conditioning will activate and heat or cool the vehicle’s interior to your setting.
18 Using Y our Remote V ehicle Starter , continued Operating the Daily Start Timer The system has the ability to start your vehicle based on a preset time entered into the 2-way transmitter. Prior to activating this feature it will be necessary to enter the desired start time, refer to Daily S tart T imer on page 1 1.
19 Page Call Out From within the vehicle, press and hold the emergency override button for 4 seconds, the 2-way remote control will emit a beep and the vehicle call page will be displayed to indicate that someone is calling you to the vehicle.
20 Anti Hi-Jack Active Anti Hi-Jack When Active Anti Hi-Jack is selected it must be activated by the transmitter each time it is needed. 1. While the ignition is ON, scroll to vehicle menu 1 and select CAR JACKING or press simultaneously press ST ART and UNLOCK for 5 seconds.
21 Quick Reference Operation Guide, continued Remote control button operation. Transm itter Button System Function Notes / Button 1 Arm/Loc k Press and releas e - Arm and Double Loc k Pulse Press twic.
22 Replacing Remote Control Batteries 1-way 5 Button Remote Control: The two 3 volt lithium batteries inside the remote control should last approximately 1 year under normal use.
23 Coded Override Procedure The system has an optional override mode that allows you to program a 2-digit personal code using the emergency override button offering a higher level of security . This feature must be enabled by your inst alling dealer , the default override code is 1 1.
24 Code Systems, Inc. Limited Lifetime Warranty Code Systems Inc. (“CODE”) warrants to the ORIGINAL PURCHASER of this CODE vehicle security product (the “Product”), purchased from an authorize.
25.
26 FCC COMPLIANCE This device complies with Part 15 of the FCC rules and with RSS-210 of Industry Canada. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. This device must accept any interference received, including any interference that may cause undesired operation.
Een belangrijk punt na aankoop van elk apparaat Code Alarm SRT 9000 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Code Alarm SRT 9000 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Code Alarm SRT 9000 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Code Alarm SRT 9000 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Code Alarm SRT 9000 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Code Alarm SRT 9000 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Code Alarm SRT 9000 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Code Alarm SRT 9000 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
