Gebruiksaanwijzing /service van het product Pro system van de fabrikant CompuSTAR
Ga naar pagina of 18
1 WWW.COMPUSTAR.COM This device complies w ith Part 15 of the FCC rules. Opera tion is subject to the following conditions; (1) This device may not cause harmful interference. (2) This device may accept any interference received, including interference tha t ma y cause undesired operation.
T able of Content s Introduction ............................................................................................................................... ................ 3 Kit(s) Contents .......................................................
Introduction Introduction Thank you for purchasing a CompuStar Pro system for your vehicle. In order to truly enjoy the benefits of this system, we recommend that you fully review the following manual.
Remote Reference Remote Reference P2WSHLEDR (2-Way Super Heterodyne) Applicable to the following models; - P2WSHLED-AS (alarm and remote start) - P2WSHLED-A (alarm w/out remote start) - P2WSHLED-S (re.
Quick Reference Quick Reference Valet Mode Valet Mode When servicing or loaning your vehicle to others, the CompuStar Pro system should be in Valet mode. Valet mode prevents the system from remote starting and disables all alarm functions. IMPORTANT: While in Valet mode the CompuStar will st i ll lock and unlock power lock systems.
2 Way LED and 1 Way Remote Button Func tions Button Duration Additional Programming Required Function / Description 0.5 seconds no Lock/Arm 3.5 seconds no 0.5 seconds no Unlock/Disarm 0.5 seconds no Aux 1. Triggers the auxiliary 1 output (most commonly used for rear defrost or window roll-down).
Remote LED Diagram and Icons Remote LED Diagram and Icons Your remote pager will indicate the status of your vehicle while in range through a series of flash ing LEDs.
pager is in range to receive commands, hold buttons for 2.5 seconds – if the pager LEDs illuminate and beep, the pager is in range to receive commands. Active Lock/Arm and Unlock/Disarm Tap button for 0.5 seconds to lock/arm and unlock/disarm. The icon will flash on your remote.
• The transmission must be left in the neutral position. • The vehicles windows must be rolled up. • The vehicles door pins must be in working order. • Do not install this remote start on a manual transmission vehicle that has a convertible or removable top.
outputs up accordingly. Using auxiliary outputs to control additional vehi cle functions will require additional parts and can be rather labor extensive. Tap button for 0.5 seconds to trigger auxiliary output 1. Tap button for 0.5 seconds to trigger auxiliary output 2.
Default 1: Off Option 2: Locks the doors when the ignition is on and after the brake is depressed. Option 3: locks the doors when the RPM’s have reached two times that of idle speed (this setting requires that a tachometer wire is connected). With both settings, the doors will unlock when the ignition is turned off.
STEP 7: Turn the ignition OFF - the RPS disarm/unlock feature is now programmed. Follow steps 3 – 5 to enter your disarm/unlock code. Secure Valet Switch The optional Secure Valet Switch prevents the alarm from being put into valet mode through cycling the ignition on/off five times.
Cold/Hot Start Mode Cold/hot start mode works in conjunction with time r start mode (see above) and the temperature sensor. It allows you to configure your timer start feature to c heck the vehicles temperature prior to starting. All of these options require programming from your local CompuStar dealer.
Remote S t art Error Diagnostic gnostic If the remote start fails to start the vehicle, the parking lights will flash thr ee times immediately. Following those three flashes the parking lights will flash again correspo nding to the error table. If the remote start fails to start the vehicle, the parking lights will flash thr ee times immediately.
Limited Lifetime W arranty Firstech, LLC Warrants to the original purchaser that this product shall b e free of defects in material and workmanship under normal use and circumstances for the period of.
Notes: ___________________________________________________________________________________ ___________________________________________________________________________________ _________________________.
___________________________________________________________________________________ ___________________________________________________________________________________ ________________________________.
www.compustar.com Toll Free: 888-820-3690 21911 68 th Ave S Kent, WA 98032 18.
Een belangrijk punt na aankoop van elk apparaat CompuSTAR Pro system (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen CompuSTAR Pro system heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens CompuSTAR Pro system vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding CompuSTAR Pro system leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over CompuSTAR Pro system krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van CompuSTAR Pro system bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de CompuSTAR Pro system kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met CompuSTAR Pro system . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
