Gebruiksaanwijzing /service van het product BlueStorm Universal PCI van de fabrikant Connect Tech
Ga naar pagina of 27
BlueStorm Univer sal PCI User Manual Contact Information: Connect Tech Inc. 42 Arrow Road Guelph, Ontario, Canada N1K 1S6 Tel: 519-836-1291 (International) 800-426-8979 (Canada & USA) Fax: 519-836-4878 Email: sales@connecttech.com support@connecttech.
BlueStorm I nstallation Guide, Conne ct Tech Inc. 2 Revision 0.10 Limited Lifetime Warranty Connect Tec h Inc. provides a lifetime warranty for all * Connect Tech Inc. products. Shoul d this product, in Con nect Tech Inc.'s opinion, fail to be in good working order during the warra nty period, Connect Tech Inc.
BlueStorm I nstallation Guide, Conne ct Tech Inc. Revision 0.10 3 Table of Contents Limite d Lifetime Warranty .............................................................................................................................. 2 Copyrig ht Notice.
BlueStorm I nstallation Guide, Conne ct Tech Inc. 4 Revision 0.10 List of Tables Table 1: DB -25 Male Pinouts for B lueStorm/LP (2 Port Co nnector) ........................................................... 13 Table 2: HDB -44 Pinouts for BlueStor m/LP (4 Port Connecto r) .
BlueStorm I nstallation Guide, Conne ct Tech Inc. Revision 0.10 5 Customer Suppo rt Overvie w If you experience dif ficulties after read ing the manual and/or using the product, co ntact the Connect Tec h Inc. reseller from which you purc hased the pro duct.
BlueStorm I nstallation Guide, Conne ct Tech Inc. 6 Revision 0.10 Introduction Connect Tec h Inc. presents BlueStor m /LP/SP/SP Opto and SP RJ-11 . These high-speed multi- port co mmuni catio n adapters are designed for Low Profile (LP) and Standard Profile (SP) PCI compatible computers.
BlueStorm I nstallation Guide, Conne ct Tech Inc. Revision 0.10 7 BlueStorm Insta llation Overvie w There ar e three stages to installing y our B lueStorm card: 1. Hard w are Configuration Interrupts and Me mory selection will be set by the host com puter’s BIOS and o perating system.
BlueStorm I nstallation Guide, Conne ct Tech Inc. 8 Revision 0.10 Multi-drop Slav e Mode In this mode the T xD+/- line driver is enabled only when data is transmitted and RxD+/ - is enabled at all ti m e s. This mode is typically used in multi-dr op 4-wire connection s.
BlueStorm I nstallation Guide, Conne ct Tech Inc. Revision 0.10 9 Figure 1: BlueStorm /LP Jumper Block Locations (2 Po rt Models) Figure 2: BlueStorm /LP Jumper Block Locations (4 Po rt Models) Figure.
BlueStorm I nstallation Guide, Conne ct Tech Inc. 10 Revision 0.10 Figure 4: BlueStorm /SP Jumper Block Locations (8 Port Models) Figure 5: BlueStorm /SP Opto J u m per Block Locations ( 4 Port Models.
BlueStorm I nstallation Guide, Conne ct Tech Inc. Revision 0.10 11 )Figure 6: BlueSto rm/SP RJ-11 (8 Port Model) Note: Refer to Table 8 for port 7 and port 8 pinouts. Jumper Configura tion for BlueStor m Jumper configuratio n options will vary by model.
BlueStorm I nstallation Guide, Conne ct Tech Inc. 12 Revision 0.10 Figure 9 illustrates t he jumper co nfigurations for selecting +5V power or +12 V power.
BlueStorm I nstallation Guide, Conne ct Tech Inc. Revision 0.10 13 the operating s ystem is booted by the curren t driver/software RS-485 mode. T he jumper is used to ensure that a po rt will power-on tri-stated . For example, the RS -485 mode selection i n the Windows control panel will override this jumper setting once a port is opened.
BlueStorm I nstallation Guide, Conne ct Tech Inc. 14 Revision 0.10 19 2 DTR output RXD- input 20 1 DTR output RXD- input 21 NC no connect NC no connect 22 1 RI input CTS+ input 23 2 RI input CTS+ input 24 NC no connect NC no connect 25 2 DCD input RXD+ input Cable CBG002 sends the signals to two DB-9 male connectors.
BlueStorm I nstallation Guide, Conne ct Tech Inc. Revision 0.10 15 38 NC no connect NC no connect 39 3 DSR input CT S- input 40 3 DTR output RXD- input 41 3 RI input CT S+ input 42 4 DSR input CT S- input 43 4 DTR output RXD- input 44 4 RI input CT S+ input Cable CBG003 sends the signals to four DB-9 male connectors.
BlueStorm I nstallation Guide, Conne ct Tech Inc. 16 Revision 0.10 Table 3 : VHDCI-68 Female Pinouts for Bl ueStorm/LP (8 Port Connector) Pin No. Port No.
BlueStorm I nstallation Guide, Conne ct Tech Inc. Revision 0.10 17 Table 3 : VHDCI-68 Female Pinouts for Bl ueStorm/LP (Continued ) Pin No. Port No. RS-232 Signal Signal Direction RS-422/4 85 Signal Signal Direction 47 6 RTS output RTS- output 48 6 DSR input CTS- input 49 6 RXD input T XD+ output 50 6 CTS input RTS+ output 51 5, 6 SG signal gnd.
BlueStorm I nstallation Guide, Conne ct Tech Inc. 18 Revision 0.10 Table 4 : HDB-78 Pinouts for BlueSto rm/SP (8 Port Conne ctor) Pin No. Port No. RS- 232 Signal Signal Direction RS-422/4 8 5 Signal S.
BlueStorm I nstallation Guide, Conne ct Tech Inc. Revision 0.10 19 Table 4 : HDB-78 Pinouts for BlueSto rm/SP (Continued) Pin No. Port No. RS- 232 Signal Signal Direction RS-422/4 8 5 Signal Signal Di.
BlueStorm I nstallation Guide, Conne ct Tech Inc. 20 Revision 0.10 Table 5 : RJ-45 Pinouts for BlueStorm /SP Opto (4 Port Connector) Pin No. RS-232 Signal Direction RS-422/485 Signal Direction 1 N/C no connect RTS (-) o utput 2 N/C input RxD (+) input 3 RTS output RTS (+) output 4 SG signal gnd SR signal ref.
BlueStorm I nstallation Guide, Conne ct Tech Inc. Revision 0.10 21 Table 6 : Pinouts and Control Signals f or DB-9 and DB-2 5 Male Connectors (BlueSto rm/LP and BlueStorm/SP Only) Pin # RS-232 RS-422/.
BlueStorm I nstallation Guide, Conne ct Tech Inc. 22 Revision 0.10 Table 8 : RJ-11 Pinouts for BlueStorm /SP RJ-11 ( Ports 7 and 8 Only) Pin No. RS-232 Direction 1 DCD input 2 DSR input 3 RxD input 4 RTS o utput 5 TxD o utput 6 CTS in put 7 DTR output 8 RI input 9 SG signal gnd .
BlueStorm I nstallation Guide, Conne ct Tech Inc. Revision 0.10 23 Figure 10: BlueSto rm External I/O Box Diagram External I/O Box (part number : IOBG08BLV1) Male DB-9 conne ctors Mounting bracke t VHDCI-68 conne ctor Note: View VHDCI-68 connector pinouts in Table 3 .
BlueStorm I nstallation Guide, Conne ct Tech Inc. 24 Revision 0.10 Figure 11: RS-42 2/485 Wiring Dia grams (BlueStorm/LP and BlueStorm/SP Only) RTS + RTS - CTS + CTS - TxD + TxD - RxD + RxD - RxD + Tx.
BlueStorm I nstallation Guide, Conne ct Tech Inc. Revision 0.10 25 Hardware Instal lation Turn the po w er o ff to your computer a nd open it to expo se the expansion slots (cons ult your system’s docu m e ntation for more infor mation about this proce dure).
BlueStorm I nstallation Guide, Conne ct Tech Inc. 26 Revision 0.10 UARTs BlueStorm/LP (2 por t m od els) ■ 17D152 dual UART with 64 byte TxD/RxD FIFO b uffers BlueStor m/LP (4 port m ode ls) ■ 17D.
BlueStorm I nstallation Guide, Conne ct Tech Inc. Revision 0.10 27 Certification Connect Tec h Inc. declares that the pr oduct(s) covered b y t he contents of this manual have been tested and found co.
Een belangrijk punt na aankoop van elk apparaat Connect Tech BlueStorm Universal PCI (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Connect Tech BlueStorm Universal PCI heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Connect Tech BlueStorm Universal PCI vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Connect Tech BlueStorm Universal PCI leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Connect Tech BlueStorm Universal PCI krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Connect Tech BlueStorm Universal PCI bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Connect Tech BlueStorm Universal PCI kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Connect Tech BlueStorm Universal PCI . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
