Gebruiksaanwijzing /service van het product 5988-7401EN van de fabrikant Agilent Technologies
Ga naar pagina of 92
S 1 Agilent 81133A/81134A Pulse Generator User’ s Guide.
2 Agilen t 81133A/ 81134A P ulse Gener ator User’ s Guide, Janu ary 200 5 Important Notic e © Agilent Technologies, Inc. 2005 Manu al P ar t Nu mbe r 5988-7401EN Revision January 2005 Printed in Ge.
Contents Agilen t 8113 3A/8113 4A Pulse Gene rato r User’ s Guide, Jan uary 20 05 3 Content s Safety R equir ements 7 Safety Su mmary 7 Enviro nmenta l Cond itio ns 7 Before Appl ying Power 8 Groun .
Cont ents 4 Agilen t 81133A/ 81134A P ulse Gener ator User’ s Guide, Janu ary 200 5 Setting Up Gener ic and Advanced Sig nals 27 Setting Up a Clo ck Si gnal 28 Using the Graphi cal Us er Inte rface .
Contents Agilen t 8113 3A/8113 4A Pulse Gene rato r User’ s Guide, Jan uary 20 05 5 Ti ming of Genera ted Signals 76 Clock 77 Pulses 78 Data Pa ttern 79 PRB S 80 Star ted Bu rst 81 Repeti tive B urs.
Cont ents 6 Agilen t 81133A/ 81134A P ulse Gener ator User’ s Guide, Janu ary 200 5.
Agilen t 8113 3A/8113 4A Pulse Gene rato r User’ s Guide, Jan uary 20 05 7 Safety Requirements The follo wing general safety precautions must be observed during all phase s of opera tio n of this in strument.
Safety R equirem ent s Safety Su mmary 8 Agilen t 81133A/ 81134A P ulse Gener ator User’ s Guide, Janu ary 200 5 Before Applying Power V erify t hat all safety precautions are t aken. The p ow er cab le inle t of t he ins tr umen t is u sed to disc onnec t t he instrument f ro m the ma ins i n case of h azar d.
Initial I nspectio n Safety Requirements Agilen t 8113 3A/8113 4A Pulse Gene rato r User’ s Guide, Jan uary 20 05 9 Initial Inspection Inspect t he s hipping c ont ainer for da mage.
Safety R equirem ent s Power Requir ements 10 Agilen t 81133A/ 81134A P ulse Gener ator User’ s Guide, Janu ary 200 5 Power Requirements NOTE W hen the front p anel swit ch is o ff , t he ins tr um ent is in “st andby” mode. The in strument is disc onn ected fr om the A C line p o w er only by disconne cting the po w er cor d.
Clea ning Recom men dation Safety Requirements Agilen t 8113 3A/8113 4A Pulse Gene rato r User’ s Guide, Jan uary 20 05 11 Cleaning Recommendation Use a d r y clot h o r one s ligh tly dampene d wit h wat er t o cl ean e xte rna l case p ar ts . Do no t att empt t o c lean int er nally.
Safety R equirem ent s Declaration of Conformity 12 Agilen t 81133A/ 81134A P ulse Gener ator User’ s Guide, Janu ary 200 5 Declaration of Conformity DECLARATION OF CONFORMI TY According t o ISO/IEC.
Agilen t 8113 3A/8113 4A Pulse Gene rato r User’ s Guide, Jan uary 20 05 13 Introduction to the Agilent 81133A/81134A Pulse Generator The Agilent 81133A and 81134A Pu lse/Pattern Generators are high- end, easy- to -use t ools for ge nerat ing p ulses , pat ter ns and dat a a t spee ds up to 3.
Introduc tion t o the A gilent 81133A/8 1134A Pulse Genera tor Benefits and Ke y Features 14 Agilen t 81133A/ 81134A P ulse Gener ator User’ s Guide, Janu ary 200 5 Benefits and Key Features Yo u r .
Front Pa nel Overv iew Introducti on to t he Agil ent 81 133A/811 34A Puls e Generat or Agilen t 8113 3A/8113 4A Pulse Gene rato r User’ s Guide, Jan uary 20 05 15 Front Panel Overview The follo wing f igure sh o ws th e main elements of t he front pan el.
Introduc tion t o the A gilent 81133A/8 1134A Pulse Genera tor Front P anel Ov erview 16 Agilen t 81133A/ 81134A P ulse Gener ator User’ s Guide, Janu ary 200 5 Input and Out puts The Agilent 81133A.
Front Pa nel Overv iew Introducti on to t he Agil ent 81 133A/811 34A Puls e Generat or Agilen t 8113 3A/8113 4A Pulse Gene rato r User’ s Guide, Jan uary 20 05 17 LEDs The front panel of the 81133A.
Introduc tion t o the A gilent 81133A/8 1134A Pulse Genera tor Rear P anel Ov erview 18 Agilen t 81133A/ 81134A P ulse Gener ator User’ s Guide, Janu ary 200 5 Rear Panel Overview At the rea r pa nel, you can f in d t he co nnec tor s for t he r emot e progra mming in terfaces GP IB, U SB an d LAN, and the po wer connector .
Agilen t 8113 3A/8113 4A Pulse Gene rato r User’ s Guide, Jan uary 20 05 19 Operating the Agilent 81133A/81134A Pulse Generator The instrument pro vides se ve ral naviga tion buttons that mak e it easy to scr oll thro ugh the diff eren t pa ges o f the graph ical use r interface and to change paramet er values .
Operati ng the A gilent 8113 3A/81134A Pulse Ge nerat or Nav igati on t hro ugh the P ages 20 Agilen t 81133A/ 81134A P ulse Gener ator User’ s Guide, Janu ary 200 5 Navigation through the Pages The.
How to Nav igate thr ough th e Para meters at one Pa ge Operati ng the A gilen t 8113 3A/81134A Pulse Ge nerat or Agilen t 8113 3A/8113 4A Pulse Gene rato r User’ s Guide, Jan uary 20 05 21 How to N.
Operati ng the A gilent 8113 3A/81134A Pulse Ge nerat or How to Select a Parameter fro m a Selection List 22 Agilen t 81133A/ 81134A P ulse Gener ator User’ s Guide, Janu ary 200 5 2 Press the n a vi gati on kn ob to open the se lecti on l ist. 3 Ro t ate the n a vig ati on k n ob to scr ol l thr oug h th e li st.
How to Change a Number Field Operati ng the A gilen t 8113 3A/81134A Pulse Ge nerat or Agilen t 8113 3A/8113 4A Pulse Gene rato r User’ s Guide, Jan uary 20 05 23 How to Change a Number Field Y o u .
Operati ng the A gilent 8113 3A/81134A Pulse Ge nerat or How to Chang e a Number Fie ld 24 Agilen t 81133A/ 81134A P ulse Gener ator User’ s Guide, Janu ary 200 5 3 Modify t h e unit : – By pr essing the respect ive so ft ke y funct ion (i n th is case , you c an immedi ately s ee th e chan ges at t he o utput).
How to Change a Number Field Operati ng the A gilen t 8113 3A/81134A Pulse Ge nerat or Agilen t 8113 3A/8113 4A Pulse Gene rato r User’ s Guide, Jan uary 20 05 25 3 P r e s s a n d ro t a t e t h e n a v i g a t i o n k n o b t o s e t t h e l e a s t s i g n i f i c a n t d i g i t to cha ng e .
Operati ng the A gilent 8113 3A/81134A Pulse Ge nerat or How to Chang e a Number Fie ld 26 Agilen t 81133A/ 81134A P ulse Gener ator User’ s Guide, Janu ary 200 5.
Agilen t 8113 3A/8113 4A Pulse Gene rato r User’ s Guide, Jan uary 20 05 27 Setting Up Generic and Advanced Signals The in tention of this chapte r is to giv e the n eces sary steps to set up generi c and advanc ed si gnals for f irst- time users o f t he A gilen t 81133A/81134A Pulse Generator.
Setting Up Gene ric and A dvanced Signals Settin g Up a Cloc k Signal 28 Agilen t 81133A/ 81134A P ulse Gener ator User’ s Guide, Janu ary 200 5 Setting Up a Clock Signal Ta s k Set up tw o cl ock signals with 100 MHz and 200 MHz freq uencies, a duty cy cle of 50%, a h igh le v el of 1.
Setting Up a Cl ock Sign al Setting Up Ge neric an d Adva nced Signal s Agilen t 8113 3A/8113 4A Pulse Gene rato r User’ s Guide, Jan uary 20 05 29 Using the Graphical User Interface First Step s Bef ore y ou start: 1 Put the inst rument into o perat ion.
Setting Up Gene ric and A dvanced Signals Settin g Up a Cloc k Signal 30 Agilen t 81133A/ 81134A P ulse Gener ator User’ s Guide, Janu ary 200 5 4 Enabl e the C hann el 1 normal Out put : By pressin.
Setting Up a Cl ock Sign al Setting Up Ge neric an d Adva nced Signal s Agilen t 8113 3A/8113 4A Pulse Gene rato r User’ s Guide, Jan uary 20 05 31 Chan nel 2 S ett ings To set t he c hann el para met ers for channe l 2 : 1 Switch to channe l 2 b y press ing the Ch2 so ftk ey .
Setting Up Gene ric and A dvanced Signals Settin g Up a Cloc k Signal 32 Agilen t 81133A/ 81134A P ulse Gener ator User’ s Guide, Janu ary 200 5 The Channe l 2 page no w looks as f ollo ws: Reconnec.
Setting Up a Cl ock Sign al Setting Up Ge neric an d Adva nced Signal s Agilen t 8113 3A/8113 4A Pulse Gene rato r User’ s Guide, Jan uary 20 05 33 Generated Si gnal If you att ach a scop e (a s DUT ), you ca n imm ediat ely se e t he sig nal. Use t he Pulse Generat or’s TRIGGER OUT to trigger t he sc ope.
Setting Up Gene ric and A dvanced Signals Settin g Up a Cloc k Signal 34 Agilen t 81133A/ 81134A P ulse Gener ator User’ s Guide, Janu ary 200 5 The sig nals as d ispla y ed on a s tandard osci llosc ope ar e de picted belo w .
Setting Up a Cl ock Sign al Setting Up Ge neric an d Adva nced Signal s Agilen t 8113 3A/8113 4A Pulse Gene rato r User’ s Guide, Jan uary 20 05 35 Using the Remot e Progra mming Interfaces The f ollowing code perfor ms the same t ask .
Setting Up Gene ric and A dvanced Signals Se ttin g Up a Pulse Signal 36 Agilen t 81133A/ 81134A P ulse Gener ator User’ s Guide, Janu ary 200 5 Setting Up a Pulse Signal Ta s k Se t up a co ntin uous p ulse sign al wi th 20 ns pe riod, a p ulse wid th of 5 ns, a n am plitude of 2.
Setting Up a Pu lse S ignal Se tting Up Generic and Adv anced Signal s Agilen t 8113 3A/8113 4A Pulse Gene rato r User’ s Guide, Jan uary 20 05 37 5 Enab le t he Chan nel 1 nor mal Outp ut: By press.
Setting Up Gene ric and A dvanced Signals Se ttin g Up a Pulse Signal 38 Agilen t 81133A/ 81134A P ulse Gener ator User’ s Guide, Janu ary 200 5 T o s et u p the tr igger outp ut: 1 On t he Au x pag e, selec t th e trigger mode Pulse . The frequency of t he trigger ou tput e quals t he syst em freque ncy.
Setting Up a Pu lse S ignal Se tting Up Generic and Adv anced Signal s Agilen t 8113 3A/8113 4A Pulse Gene rato r User’ s Guide, Jan uary 20 05 39 Using the Remot e Progra mming Interfaces The f ollowing code perfor ms the same t ask .
Setting Up Gene ric and A dvanced Signals Settin g Up a Data Patte rn 40 Agilen t 81133A/ 81134A P ulse Gener ator User’ s Guide, Janu ary 200 5 Setting Up a Data Pattern Ta s k Se t up two sig nals : • A PRBS sign al to te st a digital t ransmi tter .
Setting Up a Da ta Pat tern Setting Up Generic and Adv anced Signal s Agilen t 8113 3A/8113 4A Pulse Gene rato r User’ s Guide, Jan uary 20 05 41 6 Enab le t he Chan nel 1 nor mal Outp ut: By press .
Setting Up Gene ric and A dvanced Signals Settin g Up a Data Patte rn 42 Agilen t 81133A/ 81134A P ulse Gener ator User’ s Guide, Janu ary 200 5 6 Enabl e the C hann el 2 normal Output either: By pressing t he res pecti ve sof tkey in th e us er in ter fa ce.
Setting Up a Da ta Pat tern Setting Up Generic and Adv anced Signal s Agilen t 8113 3A/8113 4A Pulse Gene rato r User’ s Guide, Jan uary 20 05 43 The Data page no w looks as f ollo ws: Reco nnect the DUT Enable the o utput s: Generated Si gnals Use the puls e ge nerator ’s TRIGG ER OUT to t rigger the sc ope on the dat a p att er n.
Setting Up Gene ric and A dvanced Signals Settin g Up a Data Patte rn 44 Agilen t 81133A/ 81134A P ulse Gener ator User’ s Guide, Janu ary 200 5 2 Enabl e the t rigg er ou tput. The sig nals as d ispla y ed on a s tandard osci llosc ope ar e de picted belo w .
Setting Up a Da ta Pat tern Setting Up Generic and Adv anced Signal s Agilen t 8113 3A/8113 4A Pulse Gene rato r User’ s Guide, Jan uary 20 05 45 Using the Remot e Progra mming Interfaces The f ollo.
Setting Up Gene ric and A dvanced Signals Setting Up a Burst Signal 46 Agilen t 81133A/ 81134A P ulse Gener ator User’ s Guide, Janu ary 200 5 Setting Up a Burst Signal Ta s k S et u p a b u r st s i gn al c on s is t i ng o f a 3 2- b it d a t a pa t t er n r e pe a t e d t w ic e at a period of 50 0 ps with 50 ps d elay and 100 ps pu lse width.
Setting Up a Burst Signal Setting Up Generic and Adv anced Signals Agilen t 8113 3A/8113 4A Pulse Gene rato r User’ s Guide, Jan uary 20 05 47 The instr ument panel no w looks as f ollows: Channel Setti ngs for th e PRBS Si gnal To set the cha nnel p aram eter s: 1 Switch to the Chann el page.
Setting Up Gene ric and A dvanced Signals Setting Up a Burst Signal 48 Agilen t 81133A/ 81134A P ulse Gener ator User’ s Guide, Janu ary 200 5 The Channe l page no w look s as follo ws: Data Settin gs for the Pattern Signal T o set the d ata patte rn: 1 Switch to the Data page.
Setting Up a Burst Signal Setting Up Generic and Adv anced Signals Agilen t 8113 3A/8113 4A Pulse Gene rato r User’ s Guide, Jan uary 20 05 49 Reco nnect the DUT Enable the o utput s: Auxiliary Setti ngs for Start In put and T rigger Output T o set t he st ar t input an d t rigger out put parame te rs: 1 Switch to the Au x pag e.
Setting Up Gene ric and A dvanced Signals Setting Up a Burst Signal 50 Agilen t 81133A/ 81134A P ulse Gener ator User’ s Guide, Janu ary 200 5 The Aux page now look s as f ollows: Gene rat ed Si gna l Us e the ge nerator’ s TRIGG ER OU T to tr igger a scope .
Setting Up a Burst Signal Setting Up Generic and Adv anced Signals Agilen t 8113 3A/8113 4A Pulse Gene rato r User’ s Guide, Jan uary 20 05 51 Using the Remot e Progra mming Interfaces The f ollo wi.
Setting Up Gene ric and A dvanced Signals Sett ing Up a Re petit ive Bur st Si gna l 52 Agilen t 81133A/ 81134A P ulse Gener ator User’ s Guide, Janu ary 200 5 Setting Up a Repetitive Burst Sign al Ta s k Se t up a si gnal w ith 4 r epeat ed bu rsts.
Setting Up a Repeti tive B urst Signal Setti ng Up Ge neric an d Advance d Signals Agilen t 8113 3A/8113 4A Pulse Gene rato r User’ s Guide, Jan uary 20 05 53 The instr ument panel no w looks as f ollows: Channel Setti ngs for th e PRBS Si gnal To set the cha nnel p aram eter s: 1 Switch to the Chann el page.
Setting Up Gene ric and A dvanced Signals Sett ing Up a Re petit ive Bur st Si gna l 54 Agilen t 81133A/ 81134A P ulse Gener ator User’ s Guide, Janu ary 200 5 The Channe l page no w look s as follo ws: Data Settin gs for the Pattern Signal T o set the d ata patte rn: 1 Switch to the Data page.
Setting Up a Repeti tive B urst Signal Setti ng Up Ge neric an d Advance d Signals Agilen t 8113 3A/8113 4A Pulse Gene rato r User’ s Guide, Jan uary 20 05 55 Reconne ct th e DUT En able the o utput s: Generated Si gnal Use the puls e gene rator’s TRIGG ER OU T to tr igger a scope.
Setting Up Gene ric and A dvanced Signals Sett ing Up a Re petit ive Bur st Si gna l 56 Agilen t 81133A/ 81134A P ulse Gener ator User’ s Guide, Janu ary 200 5 The sig nal a s dis pla y ed o n a standa rd o scil loscop e is depicted belo w .
Setting Up a Repeti tive B urst Signal Setti ng Up Ge neric an d Advance d Signals Agilen t 8113 3A/8113 4A Pulse Gene rato r User’ s Guide, Jan uary 20 05 57 Using the Remot e Progra mming Interfac.
Setting Up Gene ric and A dvanced Signals Setting Up Sign als for a Stressed Eye Di agram Meas urement 58 Agilen t 81133A/ 81134A P ulse Gener ator User’ s Guide, Janu ary 200 5 Setting Up Signals f.
Setting Up Signals for a Stressed E ye Diag ram Measure ment Setting Up Generic and Adv anced Signal s Agilen t 8113 3A/8113 4A Pulse Gene rato r User’ s Guide, Jan uary 20 05 59 Connecting the Inst.
Setting Up Gene ric and A dvanced Signals Setting Up Sign als for a Stressed Eye Di agram Meas urement 60 Agilen t 81133A/ 81134A P ulse Gener ator User’ s Guide, Janu ary 200 5 Setting Up the 81134 A by Using the Graphica l User Inter face Instrument Sett ings T o set the i nstrument par ameters: 1 Disable the outputs.
Setting Up Signals for a Stressed E ye Diag ram Measure ment Setting Up Generic and Adv anced Signal s Agilen t 8113 3A/8113 4A Pulse Gene rato r User’ s Guide, Jan uary 20 05 61 The Chann el page now looks as f ollows: Reco nnect the DUT Enable the o utput s: Generated Si gnal Use the puls e ge nerator’ s TRIGG ER OU T to t rigger the sc ope.
Setting Up Gene ric and A dvanced Signals Setting Up Sign als for a Stressed Eye Di agram Meas urement 62 Agilen t 81133A/ 81134A P ulse Gener ator User’ s Guide, Janu ary 200 5 2 Enabl e the t rigg er ou tput.
Setting Up Signals for a Stressed E ye Diag ram Measure ment Setting Up Generic and Adv anced Signal s Agilen t 8113 3A/8113 4A Pulse Gene rato r User’ s Guide, Jan uary 20 05 63 Setting Up th e 33250A W aveform Generator Program a 50 M Hz sine wa ve with an am plitud e of 2 Vpp: 1 Press the Fr eq softk e y.
Setting Up Gene ric and A dvanced Signals Setting Up Sign als for a Stressed Eye Di agram Meas urement 64 Agilen t 81133A/ 81134A P ulse Gener ator User’ s Guide, Janu ary 200 5 Play with the Settings The dela y contr ol in put adds ad dition al d ela y to the signal dependin g on the v oltage that is f ed to the in put.
Agilen t 8113 3A/8113 4A Pulse Gene rato r User’ s Guide, Jan uary 20 05 65 Using the Agilent 81133A/81134A Pulse Generator CAUTION When using the Agilent 81133A/81134A Pulse Generator, mak e sure y ou do not s et parame ters to v alues outs ide of the s pecified ra nges.
Using t he Agil ent 81 133A/811 34A Pu lse Gene rator Pages o f the Us er Inte rfac e 66 Agilen t 81133A/ 81134A P ulse Gener ator User’ s Guide, Janu ary 200 5 Pages of the User Interface The ins trument h as a use r interfa ce to s im plif y enter ing a nd monitorin g of the s ignal set tings.
Pages of the Use r Inte rface Using t he A gilent 81 133A /81134A Pu lse Ge nerator Agilen t 8113 3A/8113 4A Pulse Gene rato r User’ s Guide, Jan uary 20 05 67 • D at a Page At t he D a t a p ag e , yo u ca n se t u p a n a rb it r ar y d a t a p at t e r n up t o t h e maximal a vaila ble memo r y (8 kBit) per chann el.
Using t he Agil ent 81 133A/811 34A Pu lse Gene rator Combining Parameters for Signal Generation 68 Agilen t 81133A/ 81134A P ulse Gener ator User’ s Guide, Janu ary 200 5 Combining Parameters for Signal Generation The follo wing t able sho ws y ou ho w the various modes and parameters can be comb ined.
Combining Parameters for Signal Generation Using t he Agil ent 81 133A/811 34A Pu lse Gene rator Agilen t 8113 3A/8113 4A Pulse Gene rato r User’ s Guide, Jan uary 20 05 69 – Data in e ither R Z, R1 or N RZ f ormat – Pse udo random b it stream ( PRBS) polynomials F or d et ails on t hes e sig nals, see “P attern Modes” on page 70 .
Using t he Agil ent 81 133A/811 34A Pu lse Gene rator Combining Parameters for Signal Generation 70 Agilen t 81133A/ 81134A P ulse Gener ator User’ s Guide, Janu ary 200 5 Pattern Modes Y ou ca n selec t t he following patt er n mod es: •S q u a r e Gener ate s a sq uare wave (clock) of f ixed widt h (50 % du ty cycle).
Combining Parameters for Signal Generation Using t he Agil ent 81 133A/811 34A Pu lse Gene rator Agilen t 8113 3A/8113 4A Pulse Gene rato r User’ s Guide, Jan uary 20 05 71 Signal Modes In Data and PRBS pattern m ode s, the p ulse outp ut f or mat ca n be select ed from RZ , R1 , an d NRZ .
Using t he Agil ent 81 133A/811 34A Pu lse Gene rator Combining Parameters for Signal Generation 72 Agilen t 81133A/ 81134A P ulse Gener ator User’ s Guide, Janu ary 200 5 V ariable Crossover Y ou can change the crossover point in range 30% … 70% of the NRZ signal separ ately f or e ach chann el.
Combining Parameters for Signal Generation Using t he Agil ent 81 133A/811 34A Pu lse Gene rator Agilen t 8113 3A/8113 4A Pulse Gene rato r User’ s Guide, Jan uary 20 05 73 Clock Sources The sel ected clo ck source defines t he tim e base fr om which all oth er timing par ameters are deriv ed.
Using t he Agil ent 81 133A/811 34A Pu lse Gene rator Combining Parameters for Signal Generation 74 Agilen t 81133A/ 81134A P ulse Gener ator User’ s Guide, Janu ary 200 5 –I n t . D i r e c t Allo ws you to vary the clock deriv ed fr om the internal YIG oscilla tor in t he ra nge o f one oct ave.
Combining Parameters for Signal Generation Using t he Agil ent 81 133A/811 34A Pu lse Gene rator Agilen t 8113 3A/8113 4A Pulse Gene rato r User’ s Guide, Jan uary 20 05 75 Start Mode When the Ext.
Using t he Agil ent 81 133A/811 34A Pu lse Gene rator Ti ming of Gene rate d Sig nals 76 Agilen t 81133A/ 81134A P ulse Gener ator User’ s Guide, Janu ary 200 5 NOTE The trigger divi der does not t ake the frequency divider of the ch an n e ls in t o ac c ou n t .
Timing of G enerated Signa ls Using t he Agil ent 81 133A/811 34A Pu lse Gene rator Agilen t 8113 3A/8113 4A Pulse Gene rato r User’ s Guide, Jan uary 20 05 77 Clock The following f igu re sh o ws t he typ ica l timin g for the clock signa l.
Using t he Agil ent 81 133A/811 34A Pu lse Gene rator Ti ming of Gene rate d Sig nals 78 Agilen t 81133A/ 81134A P ulse Gener ator User’ s Guide, Janu ary 200 5 Pulses The following f ig ure s hows the typic al tim ing for cont inuous pulse s.
Timing of G enerated Signa ls Using t he Agil ent 81 133A/811 34A Pu lse Gene rator Agilen t 8113 3A/8113 4A Pulse Gene rato r User’ s Guide, Jan uary 20 05 79 Data Pa ttern The following f ig ure shows t he typic al tim ing for a dat a p att ern .
Using t he Agil ent 81 133A/811 34A Pu lse Gene rator Ti ming of Gene rate d Sig nals 80 Agilen t 81133A/ 81134A P ulse Gener ator User’ s Guide, Janu ary 200 5 PRBS See “D ata Pattern” on page 79 for for th e tim ing dia gr am.
Timing of G enerated Signa ls Using t he Agil ent 81 133A/811 34A Pu lse Gene rator Agilen t 8113 3A/8113 4A Pulse Gene rato r User’ s Guide, Jan uary 20 05 81 Started Burst The follo wing fig ure shows t he typical timing f or the star t ed burst. The burst s are started by the risin g e dge of the armin g sour ce.
Using t he Agil ent 81 133A/811 34A Pu lse Gene rator Ti ming of Gene rate d Sig nals 82 Agilen t 81133A/ 81134A P ulse Gener ator User’ s Guide, Janu ary 200 5 Repetitive Burst The following figure shows the typi cal timi ng for the repet itive burst.
Jitter Modulati on Using t he Agil ent 81 133A/811 34A Pu lse Gene rator Agilen t 8113 3A/8113 4A Pulse Gene rato r User’ s Guide, Jan uary 20 05 83 Jitter Modulation The ext er nal sou rce for jitt er m odu latio n is a ppli ed t o t he delay contr ol i np ut.
Using t he Agil ent 81 133A/811 34A Pu lse Gene rator Saving and Re calling Sett ings 84 Agilen t 81133A/ 81134A P ulse Gener ator User’ s Guide, Janu ary 200 5.
Agilen t 8113 3A/8113 4A Pulse Gene rato r User’ s Guide, Jan uary 20 05 87 Updating the Firmware Fir m ware updat es o f t he ins tr um ent ca n be done by usin g one of t he supported pro gramming i nterfaces. Updates and pat ches are availab le on the Agi lent W eb a t: http://www .
Updating t he Firmware 88 Agilen t 81133A/ 81134A P ulse Gener ator User’ s Guide, Janu ary 200 5.
Agilen t 8113 3A/8113 4A Pulse Gene rato r User’ s Guide, Jan uary 20 05 87 T roubleshooting This chapter pro vides basic troubleshooti ng tips that yo u can use i f t he instr ument is not per form ing as exp ect ed. Instrument out of Specs The sp ecification is vali d within +/ - 10 de gree Celsiu s after running Sel fcal ibr atio n.
T roubleshooting 88 Agilen t 81133A/ 81134A P ulse Gener ator User’ s Guide, Janu ary 200 5 Instrument does not Respond If t he instr u ment d oes no t resp ond when you press a butt on, i t is possibl e that it is be ing u sed r emotely. T o reacti vate the instr ument , press t he Local ke y (if this is a vaila ble).
Inde x Agilen t 8113 3A/8113 4A Pulse Gene rato r User’ s Guide, Jan uary 20 05 89 Index A advanced sig nals setup 27 Aux page 67 B benefits 14 Burst (instrument mode) 69 burst signal example 46 C channel page pages channel 66 cleaning recom mendations 11 clock timing 77 Clock Input 16 clock jitter 14 clock signal example 28 clock sources 73 ext.
Inde x 90 Agilen t 81133A/ 81134A P ulse Gener ator User’ s Guide, Janu ary 200 5 P pages Aux 67 Data 67 graphical use r interface 66 Main 66 scrolli ng 19 pages overvi ew 20 parameter selec ting 21.
Inde x Agilen t 8113 3A/8113 4A Pulse Gene rato r User’ s Guide, Jan uary 20 05 91.
S 1 Copy righ t Agi lent T ech nolo gies 2 005 Printed in Ge rmany January 2005 5988-740 1EN.
Een belangrijk punt na aankoop van elk apparaat Agilent Technologies 5988-7401EN (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Agilent Technologies 5988-7401EN heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Agilent Technologies 5988-7401EN vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Agilent Technologies 5988-7401EN leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Agilent Technologies 5988-7401EN krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Agilent Technologies 5988-7401EN bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Agilent Technologies 5988-7401EN kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Agilent Technologies 5988-7401EN . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
