Gebruiksaanwijzing /service van het product C62 van de fabrikant Cortelco
Ga naar pagina of 84
V ersion 1.0 August 14, 2013 C 6 2 V o IP P h o n e U s e r M a n u a l Cortelco 1703 S awyer Road Corinth, MS 3 8834 USA www.cortelco.com Tel: (662)2 87-5281 Fax:(662)287 - 3889.
2 Safety Notices Please read the fol lowing safety notices before installing or using this phone. They are crucial for the safe and reliable operation o f the dev ice. Please use th e external pow er supply that is included in the pack age. Other power supplies m ay cause damag e to the device, af fect the behavior or ind uce noise.
3 T able of Co ntents 1 INTRODUCING C62 V OIP PHONE ............................................................................... 7 1.1 T HANK Y OU .....................................................................................................
4 4.3 R EDIAL / U NREDIAL ........................................................................................................... 18 4.4 C LICK T O DIAL ..............................................................................................
5 7 ADV ANC ED SETTINGS ................................................................................................ 26 7.1 G ENERAL ..................................................................................................................
6 8.3.4.3 DIAL PLAN ...................................................................................................................... 57 8.3.4.4 CONT ACT ............................................................................................
7 1 Introducin g C62 VoIP Phone 1.1 Thank you Thank y ou for purchasing the C62 V oice Over I nt ernet Proto col (V oIP) telephone. The C62 is a fully featu red telephone that provides v oice comm unication over the data network. T his phone has all the features o f a traditional telephone and al l gives access to many data service features.
8 added. T o exit Phone Boo k mode, press and hold this key . Mute During a call pre ss this key to prevent the d istant party from hearing the conv ersation. T he di stant party will still be heard. Line1/2/3 /4 The C62 has 4 SI P lines. The user may select ei ther of them to place a ca ll if they have been reg istered to a SIP server .
9 DSS key s V arious functions whi ch can be configured in the web interface. See Section 8.3.5. 1.4 Input/Output Ports Port Port name Description Power switch Input: 5V AC, 1A W AN 10/100M Connect it.
10 Call mute Contact DND(Do not Dis turb) In hand free mode In handset mode In headset mode SMS Missed call Call forward 1.6 LED Introduc tion 1.6.1 Program mable k ey LEDs for BLF LED S tat us Description S teady green The object is idle. Slow blinking red The object is ring ing.
11 Slow Blinking Green The call is on ho ld. Slow Blinking R ed Registration is un successful. Of f The line is not subsc ribed or idle. 1.6.4 Program mable k ey LEDs for MWI LED S tat us Description Blinking Green There are new v oice mails. Of f There is no new v oice mail.
12 2. Connect the hand set to the handset jack usi ng the hand set cable in th e packag e. 3. Connect the powe r supply to the DC port on the ba ck of the phone. Connect the power supply to a standard power ou tlet. Note tha t the power su pply will not be needed if your ne twork prov i des Power ov er Ethernet ( PoE).
13 7. Input the password (default v alue is 123). 8. Press ENTER. 9. Scroll down to “ 2. N etwork. ” 10. Press OK. 11. Press OK to sele ct W AN Setting s. 12. Scroll down to “ 4. PP PoE Setting s. ” 13. Press OK. 14. Use the key pad to enter the User Name.
14 20. Use the key pad to enter the G ateway Address. 21. Press SA VE softkey . 22. Press DOWN ARROW . 23. Use the key pad to enter the D NS 1 Address. 24. Press SA VE softkey . 25. Press DOWN ARROW . 26. Use the key pad to enter the D NS 2 Address if desired.
15 3 Basic Functions 3.1 Making a call 3.1.1 Call Dev i ce Calls can be m ade using three di ffe rent devices: 1. Handset - Pick up the handset. The icon will be sh own on the LCD screen. 2. Speakerphone - Pre ss the S peaker button. The icon will be shown on the LCD screen.
16 The following cal l forwarding events can be configured: Off : Call fo rwarding is dea ct ivated by default. Always : Incom i ng calls are immediately forwarded. Busy : Incom i ng calls are imm ediately forwarded whe n the phone is b usy . No Answer : Incoming calls are forwarded when t he ph one is not answe red after a specific pe riod.
17 3.9 Call transfer 3.9.1 Blind Tra nsfer During a conver sation, press the XFER k ey , dial the num ber to which the ca ll is to be transferred followed by "#" and then h ang up.
18 4 Advanced Fu nctions 4.1 Call pickup This allows a thi rd party to answer a cal l by dialing a code. For example: A calls B , but there is no answe r . C can g o off hook, dia l a code plu s B’ s num ber , and pick up the call. The following chart shows how to config ure this in the dial peer scre en.
19 4.4 Click to dial If User A browses to User B’ s phone number or SI P address i n the contact p age and clicks it, User A ’ s phone will ring . After he goes of f hook, the phone wi ll call User B. Note ： This feature req uires that the PBX suppor t click to dial.
20 3. Press Edit 4. Use the navig ation keys to enable v oi cem ail. 5. Input the num ber . Press 2aB softkey i f nece ssary to change the input method. 6. Press Save to sav e the chang e. 7. To hear a new v oi cemail, pr ess the V oicemail softk ey .
21 F_ MWI – Mess age W aiting F_DND – D o Not Disturb F_HOLD – H old F_B_TRANSFER – Blind Trans fer F_PBOOK – Phon ebook F_REDI AL – Redial F_PI CKUP – Call P.
22 4. Use UP ARRO W or DOWN A RROW to access time setting . 5. Use keypad to en ter time in secon ds. 5.2 Auto Handdow n This is the tim e after a cal l ends before the phone retur ns to the idle sta te. 1. Press Menu - >Features-> Enter ->A uto Handdown- > Enter.
23 5.8 Auto Redial If Auto Redial is enabled, the phon e will continue to retry a bu sy call. Th e user sets the retry interval and the num ber of t imes to redial. The user is also giv en the option to ac tivate this feature on each b usy call. 1. Press Menu - >Features-> Enter ->A uto Redial- > Enter .
24 Example: A call is placed t o 6625551212. Password is set to 662 and length is set to 3. Display will show 662 ***1212. 1. Press Menu - >Features-> Enter ->Passwd D ial-> Ente r . 2. Use LEFT ARR OW or RIG HT ARROW to enab le the feature.
25 6.3 R ing Se tt ing s 6.3.1 Ring Volum e 1. Press Menu - >Settings-> Enter ->Basic Set tings- > Enter ->Ring Settings->Enter ->Ring V olume->Enter . 2. Use LEFT ARROW or RIGHT ARROW to sele ct the d esired ring v olume from the 9 choices.
26 4. Press Save. 5. Use BACK or EXI T to return to id le screen. 6.6 Greeting Words This feature shows the words displa y ed in the upp er left of the LCD. Def ault is VOIP PHONE. 1. Press Menu - >Settings-> Enter ->Basic Set tings- > Enter ->Greeting W ord->Enter .
27 7.2.2 Advanced Sett i ngs 1. Domain Realm – SIP Domain 2. Dial W ithout Registered – Enable or disabl e dialing with n o SIP registration 3. Anonymous – Priv acy Support. C hoose RFC3323, RFC3325 or Non e 4. DTMF Mode – Choo se RFC2833, SI P_Info, In-band, or Auto 5.
28 name must be en tered. 7.6 Factory Rese t Choose Y es to return the phone to factory default settings. 8 W eb Configur ation 8.1 Introduction o f configuration 8.
29 After configur ing the IP phone, rem e mber to click SA VE under the Maintenance t ab. If this is not done, the pho ne will lose t he modificatio ns when it is reboo ted.
30 Field Name Explanation Network Shows the config uration inform ati on for W AN and LAN port, including connec tion mode of W AN port (S tatic, DHCP , PPPoE), MAC address, I P address of W AN port and LA N port, D HCP server status for LAN port (ENAB LED or DI SABLED).
31 8.3.1.2.1 Static IP If S tat ic I P i s select ed, this screen wi ll be displayed. Information prov ided by th e ISP should be entered. Click Back to retu rn to the Wiz ard screen. Click Next to go to Q uick SI P Settings 8.3.1.2.2 DHCP After selecting DHCP and clicking NEXT , the Quick SI P Settings sc reen will ap pea r .
32 8.3.1.2.4 Quick SIP Settings Field Name Explanation Display Nam e The name shown i n caller I D. Server Address SIP server address eithe r IP address or URI . Server Port SIP server port (usually 5060). Authentication Us er Login nam e or Authentication I D.
33 8.3.1.3 Call Log Outgoing call log s can be seen on t his pag e. Field Name Explanation S tart T ime S tart time of the outgoing call Duration Duration of the ou tgoing call. Dialed Calls Account, protocol, and line of th e outgoing call. 8.3.1.4 Language Field name Explanation Language Set the languag e of phone.
34 8.3.2 Net work 8.3.2.1 WAN C onfig Field Name Explanation Active I P Address The current I P address of the phone. Current Subnet Ma sk The current Subnet Mask. Current IP Gateway The current Ga teway I P address. MAC Address The MAC address o f the phone.
35 8.3.2.1.1 Static IP If S tat ic IP is chosen, the sc reen below w ill appear . Enter values provided by t he I SP . 8.3.2.1.2 DHCP If DHCP is chosen, all co nfiguration info rmation wil l be provided by a DHCP server . Contact the ISP to determine if DH CP is used.
36 8.3.2.2 LAN C onfig Field Name Explanation IP Address LAN static I P . Subnet Mask LAN Subnet Mask . DHCP Service Activate DHCP server for LAN port. The phone must be rebooted for the DHCP server sett ing to take ef fect. NA T Enable NA T operat ion Port Mirror Port Mirror can on ly be activ ated in bridge m ode.
37 Chart 1 shows a ne twork sw itch with no V LAN. Any broadcast frames will be t ransmitted to all other port s. For exam ple, and frames broadcast from Port 1 will be sen t to Ports 2, 3, and 4. Chart 2 shows an e xample w ith two VLANs ind icated by red and blue.
38 Field Name Explanation Enable LLDP Enable or Disable L i nk Lay er Discov ery Protocol (LL DP) Packet Interv al The time interv al for sending LLDP Packets Enable Learning Funct ion Enables the telephon e to synchron ize its VLAN data with the Network Switch.
39 8.3.2.4 Service Port Set the port values for T elnet/HTTP/R TP on this page. Field Name Explanation W eb Server T ype Specify W eb Server T ype – HTTP or H TTPS HTTP Port Port for web brow ser access. Defa ult value is 8 0. T o enhance security , change this from the default.
40 8.3.2.5 DHCP SERV IC E Field Name Explanation DHCP Client T able IP -MAC mapping table. I f the LAN por t of the phone c onnects to a device, this table will show its IP and MAC address. Leased T able Name Name of the lease t able. S tart IP Address Beginning I P address of the lease table.
41 8.3.2.6 TIME&DA TE Set the time z one and SNTP ( S imple Network T ime Protoco l) server on this page. Daylight savings time conf iguration and m anual tim e a nd date entry are also done on th.
42 Daylight Saving Time Sett ings Enable Enable daylight saving tim e. Of fset(minutes) DST of fset. Default is 60 m inut es. Month S ta rt and end m onth for DS T W eek S tart and end week fo r DST D.
43 Field Name Explanation Choose the sip lin e to config ured (SIP 1 – SIP 6). Click the dropdown arrow to select the line. Status Shows registrat ion status. Will show “Regis tered” if registered or “Unapplied” i f not registe red. Server Address SIP server I P address or URI.
44 Display Nam e Set the display nam e. T his nam e is s how n on Caller I D. Enable Registra tion Check to subm it registration inform ati on. Domain Realm SIP Dom ain if different tha n the SIP Reg istrar Server.
45 Subscribe For MWI If enabled, the phone w ill send Message Waiting Indication (MWI) Subscribe m essa ge to the SI P Server MWI Num ber Specify the num ber to call to re trieve Voice Me ssages. Subscribe Period Time interv al between MWI Subscri be Mes sages.
46 Different VoI P Service pro viders may require different m odes. Local port SIP port. Default is 5060. Ring type Set ring tone. There are 9 standard options and 3 use r options. Enable Rport Enable/Disable suppo r t for NAT traversal v ia RFC3581 (Rport) .
47 Registration Fail ure Retry Time Registration failur e retry tim e – If reg istration fails, the phone w ill attempt to register ag ain after reg istration failu re retry tim e. This will affect all lines 8.3.3.2 IAX2 Field Name Explanation S tatus Shows registrat ion status.
48 non- num eric, this number can be used to replac e the echo test text. This allows dial ing a num ber to perform an echo v oice test. This function i s provided to tes t whether com munication throug h the server . Echo T est T ext Echo test text Refresh Time Expiration tim e of IAX2 serv er regist ra tion.
49 Field Name Explanation STUN NAT Tran sversal Shows whether or no t STUN N AT Transversal was su cc essful. Server Address STUN Server I P addres s Server Port STUN Server Por t – Default is 3478. Binding Period STUN blinding period – STUN packet s are sent at this interval to keep the NAT m apping active.
50 Example 2: Subst itution – T o dial a long distance call to Bei jing requires di aling a rea code 010 before the lo cal phone number . Using this feature 1 can be s ubstituted for 0 10. For example, to ca ll 62213123 would only requ ire dialing 162213123 in stead of 0106 2213123.
51 Dial Peer Ex amples Web Interface Explanation Example Set phone num ber, Destination, Alias a nd Delete Length. Phone number is XXXT; Destination is 255.255 .255.255 (0.0.0.2) and Alias is del. Any phone num ber that beg ins with XXX will b e sent via SIP2 after the fir st several digits are deleted de pending on the delete length.
52 The phone will add th e alias to the end of the di aled number if the dialed num ber m atches the template in the Ph one Number box. Dial “8309“ The SIP1 serv er will receive “07558309” Set Phone Num ber, Alias and Delete Length.
53 Third Codec The third codec cho ice: G.711A /u, G.722, G.723, G .729, G.726, None Fourth Codec The forth codec cho i ce: G. 711A/u, G.722, G.723, G.7 29 , G.726, None Fifth Codec The fifth codec c hoice G.711A /u, G.722, G.723, G.72 9 , G.726, None Sixth codec The sixth codec cho ice G.
54 8.3.4.2 FE ATURE This page config ures various fe atures such as Hotline, Call Transfer , Call W aiti ng , etc. Field Name Explanation Do Not Disturb If enabled, the phone w ill reject incoming call s. The callers receive busy tone. Outgoing calls m ay be made.
55 Auto Redial Times Maximum number of auto r edial attem pts. Auto Headset Automatically answ er s ca ll on headset. Enable I ntercom If enabled, al lows intercom cal ls. Enable I ntercom Tone If enabled, play s intercom ring tone to alert to an intercom call .
56 Ring from H eadset If this is enabled and a headset is connected, r ing tone will be p layed in the headset. Enable I ntercom Mute If enabled, m utes incoming cal ls during an intercom call Enable I ntercom Barge If enabled, the p hone will auto- answer an intercom cal l during an outside call.
57 8.3.4.3 DIAL P LAN This phone suppo rts 7 dialing modes: 1. End with “#”– Dia l the desired num ber , and press # to send it to the server . 2. Fixed Length – The number will be sen t to the serv er after the spec ified number of digits are dialed.
58 5. Press # to Do Bl ind T ransfe r - Press # after enteri ng the tar get number for the transfer . The phone will transfer the current call to the third party . 6. Blind T ransfer on Onhook - Hang up after entering the targ et number for the transfer .
59 8.3.4.4 CONTA CT Enter the nam e, phone number and r ing type for each c ontact here. Field Name Explanation Phonebook Tab les Group Dropdown box to select gro up Name Contact name.
60 Office Num ber, Mobile Number, Other Num ber Contact phone num ber s Ring Type Ring type for thi s contact Group Contact group for this contact Add Contact Name Contact name Office Num ber, Mobile .
61 8.3.4.5 REMOTE C ONTACT Allows access to remote co ntact lists eithe r via XML or LDAP . TFTP example: Set the Pho nebook Nam e as cortelco - Server URL is tftp://192.168.1.3/ admin/phonebook /index.xml. LDAP example: Server UR L is ldap: //192.168.
62 8.3.5 Functi on Key The phone has 8 pr ogrammable DSS /Function keys with associa ted LEDs and 4 programm able Line key s with LEDs. The 4 direction al arrow key s and the OK bu tton are also programm able. This screen also se ts the LCD contr ast and en ables the back light.
63 Screen Configurat ion Field Name Explanation Contrast Set screen contras t Enable Backlight Enable/disable LCD b ac klig ht. Line Key Settings /Function Key S ettings Field Name Explanation Key Key Nam e T ype Select the ty pe of function the k ey is to perform .
64 8.3.5.2 Softk eys Configure the fun ctions perform ed by the softkey s under t he LCD in v arious phone ope r ating modes..
65 8.3.5.3 EXT Keys These are the key s on the C10 Expan si on Modu le. Up to 5 m odules m ay be connected to one phone. The phone can power one m odul e. Add itional modules w ill require a sep arate power supply . See the C1 0 documentation fo r installation in structions.
66.
67 Auto Provision Se tting Field Name Explanation Current Config V ersion Show the current con fig file’s vers ion. If the v ersion of configuration dow nloaded i s higher than th is , the config uration will be upgraded.
68 PnP Port PnP Server Port PnP T ransport PnP T ransfer protocol – U DP or TCP PnP Interval Interval tim e for querying P nP server . Default is 1 hour . Phone Flash Se ttings Server Address Set FTP/TF TP/HTTP server IP address for auto update . The address can be an IP addr ess o r Dom ai n name with subd irectory .
69 Level Name Description 0 Emer gency System is unusab le. T his is the highest debug info le vel. 1 Alert Action m ust be taken imm ediately . 2 Critical Critical condit ions. System is probably working incorrectly . 3 Error Error conditions. Sy st em m ay not work cor rectly .
70 8.3.6.3 Config Sett ing Config Setti ng Field Name Explanation Save Configura tion Save the current phone config uration. Clicking this sa ves all configuration chang es and makes them effective im mediately . Backup Configura tion Save the phone co nfiguration to a txt or xm l file.
71 8.3.6.4 Update This page allows up l oading configuration files to the phone. Update Field Name Explanation Web Update Web Update Browse to the con fig file, a nd press Update to load it to the phone. V arious types of files can b e loaded here inc luding firmw are, ring tones, local phon ebook and config files in either tex t or xm l format.
72 T ype Action to be execu t ed by th e phone. 1. Application upda te - download system update file 2. Config file expo rt - Upload config file to FTP/TF TP server . It can then be nam ed and saved. 3. Config file im port - Download th e config file f rom FTP/ TFTP server .
73 8.3.6.5 Access User accounts can b e a dded or dele ted from this pag e. T he au thority of account s can also b e changed. Access Con figuration Field Name Explanation LCD Menu Pass word Settings Menu Password Set s the passwo rd for enteri ng the setup menu fr om the phone keypad.
74 8.3.6.6 Reboot Some configura tion modificat ions require a reboot to becom e effective. Clicking the Reboo t button will caus e the phone to reboot imm ediat ely . Note : Be su re to save the c onfiguration before r ebooting. 8.3.7 Security 8.3.7.
75 8.3.7.2 Firewall Firewall Confi guration Firewall rules can b e used to prevent unau t horized I nter net users from access ing private networks connec ted to this phone (input rule), or p revent unauthoriz ed devices connected to this phone from ac cessing t he Internet (ou tput rule).
76 When a connec ted device tr ies to access 192.168.1.118 , t he phone w i ll deny th e request because of the ou t_access rule. Acces s to any other I P address wil l be allowed.
77 connectivity to specific hosts in th e internal ne twork, althoug h communication with other hosts in the DMZ and t o th e external network is allowed.
78 Network Address T ranslation (NA T) T able Shows the NA T TCP a nd UDP mapping tables NA T T able O ption T ransfer T ype Select the T CP or UDP protocol.
79 VPN Server Address Set VPN L2 TP Se rver I P address . VPN User Set User Nam e access to VPN L2TP Ser ver . VPN Password Set Password ac cess to V PN L2TP Server . 8.3.7.5 Security Field Name Explanation Update Security File Select Security Fi le Browse to the se curity file to be upd at ed.
V ersion 1.0 August 14, 2013 9 Appendix 9.1 Specification 9.1.1 Hardware Item Specification Power Adapter Input: 100- 240V Output: 5V 1A Port W AN 10/100Base- T RJ-45 1 PO R T LAN 10/100Base- T RJ-45 1 PO R T EXT RJ45 1 POR T Headset RJ9 1 POR T Power Consum pt ion Idle: 2.
- 81 - SIP domain SIP authentication none basic MD5 DNS Peer to Peer / IP call Autom atic line selection 9 S t andard ring tones and 3 user -defined ring tones .
- 82 - Phonebook 500 r ecords Incom ing Calls Outgoing Calls Miss ed Calls Max of 300 Records Ea ch Supports vCard/XML/CS V Support I AX2 4 Programm able Li ne/DSS key .
- 83 - W an Port Suppo r ts Main D NS and Seconda ry DNS Supports DNS v i a DHCP or S t atic D NS Supports DHC P client on W AN Supports DHC P server on LAN QoS with Dif fServ Network T ools in T elnet Serv er Ping T race Route T elnet Client 9.
- 84 - 9.2 Digit-character map table Keypad Character Keypad Ch aracter 1 @ 7 P Q R S p q r s 2 A B C a b c 8 T U V t u v 3 D E F d e f 9 W X Y Z w x y z 4 G H I g h i */.
Een belangrijk punt na aankoop van elk apparaat Cortelco C62 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Cortelco C62 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Cortelco C62 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Cortelco C62 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Cortelco C62 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Cortelco C62 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Cortelco C62 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Cortelco C62 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
