Gebruiksaanwijzing /service van het product 315.17513 van de fabrikant Craftsman
Ga naar pagina of 18
Owner's Manual ROUTER Double Insulated Model No. 315.175130 Save this manual for future reference CAUTION: Read and follow all Safety Rules and Operating Instructions before first use of this product. Customer Help Line: 1-800-932-3188 Sears, Roebuck and Co.
• Table Of Contents .......................................................................................................................................... 2 • Warranty ...........................................................................
The purpose of safety symbolsis to attract your attention to possibledangers. The safety symbols, and the explanations with them, deserve your carefulattentionand understanding. The safetywarningsdo not by themselves eliminate any danger. The Instructions or warnings they give are not substitutes for proper accident prevention measures.
• PROTECT YOUR HEARING, Wear hearing protection during extended periods of operation. • DO NOT ABUSE CORD. Never carry tool by cord or yank it to disconnect from receptacle, Keep cord from heat, oil, and sharp edges. • SECURE WORK. Use clamps or a vise to hold work.
_i WARNING: Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to cause cancer, birth defects or other reproductive harm.
KNOW YOUR ROUTER See Figure I. Before attempting to use any tool, familiarize yourself with all operating features and safety requirements. SWITCH To turn your router on, depress the switch trigger.
_k WARNING: Your router should never be connected to power supply when you are assembling parts, making adjustments, installing or removing cutters, cleaning, or when not in use, Disconnecting router will prevent accidental starting that could cause serious personal injury.
DEPTH OF CUT ADJUSTMENTS See Figures 4, 5, and 6. We recommend that cuts be made at a depth not exceeding 1/8 in. and that several passes be made to reach depths of cut greater than 1/8 in. • Unplug your router. _1 WARNING: Failure to unplug your router could result in accidental starting causing serious injury.
DEPTH OF CUT ADJUSTMENTS WHEN ROUTER IS MOUNTED TO A ROUTER TABLE See Figure 7. The depth of cut is readable from both sides of the depth indicator ring. The bottom ring is convenient when using your router mounted upside down to a router table. The indicator point on the base can also be used when using your router mounted to a router table.
FREEHAND ROUTING See Figure 9. FREEHAND ROUTING Fig. 9 When used freehand, your router becomes a flexible and versatile tool. This flexibility makes it possible to easily rout signs, relief sculptures, etc. There are two basic techniques for freehand routing: • Routing letters, grooves, and patterns into wood.
TOO FAST TO0 SLOW Fig. 10 Your router is an extremely high-speed tool (25,000 RPM no-load speed), and will make clean, smooth cuts if allowed to run freely without the ovedoad of a forced (too fast) feed. Three things that cause "force feeding" are bit size, depth-of-cut, and workpiece characteristics.
To make deeper cutsit is therefore necessary to make as many successive passes as required, lowering the bit 1/8 inch for each new pass. In order to save time, do all the cutting necessary at onedepth setting, before lowering the bitfor the next pass.
STARTING AND ENDING A CUT INTERNAL ROUTING Tilt router and place on workpiece, letting edge of subbase contact workpiece first. Be careful not to let router bit contact workpiece. Turn router on and let motor build to its full speed. Gradually feed cutter into workpiece until subbase is level with workpiece.
,_ WARNING: When servicing, use only identical Craftsman replacement parts. Use of any other part may create a hazard or cause product damage. GENERAL Only the parts shown on parts list, page 17, are intended to be repaired or replaced by the customer.
SWITCH REPLACEMENT See Figures 15 and 16. • Unplug your router, _k WARNING: Failure to unplug your router could result in accidental starting causing serious injury. • Remove screws (A) and handle cover (B). See Figure 15. B c .15 • Note the location of the molded bend relief (C) on the power handle cord.
CRAFTSMAN ROUTER - MODEL NUMBER 315.175130 I I 10 9 I I SEE NOTE"A" i 25 26 6_ 23 24 22 18 9 19 NOTE: "A" - The assembly shown represents an important part of the Double Insulated System. To avoid the possibility of alteration or damage to the System, service should be performed by your nearest Sears Repair Center.
CRAFTSMAN ROUTER - MODEL NUMBER 315.175130 The model number will be found on a plate attached to the motor housing. Always mention the model number | in all correspondence regarding your ROUTER or when ordering repair parts. I SEE BACK PAGE FOR PARTS ORDERING INSTRUCTIONS Key Part No.
1-800-4-MY-HOME sM Anytime, day or night (1-800-469-4663) www.sears.com To bring in products such as vacuums, lawn equipment and electronics for repair, call for the location of your nearest Sears Parts & Repair Center. 1-800-488-1222 Anytime, day or night www.
Een belangrijk punt na aankoop van elk apparaat Craftsman 315.17513 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Craftsman 315.17513 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Craftsman 315.17513 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Craftsman 315.17513 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Craftsman 315.17513 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Craftsman 315.17513 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Craftsman 315.17513 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Craftsman 315.17513 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
