Gebruiksaanwijzing /service van het product DI-707P van de fabrikant D-Link
Ga naar pagina of 46
DI - 707P Ethernet Broadband Router User ’ s Manual (Please refer to the Quick Install Guide for installation instructions.).
- 2 - Table of Contents Introduction .................................................................................................. 4 Functions and Features ......................................................................... 4 Introduction to Broadband Router Technology .
- 3 - B.1 Install TCP/IP Protocol into Your PC .......................................... 28 B.2 Set TCP/IP Protocol for Working with the DI - 707P ................... 30 Technical Specifications .......................................................
- 4 - Introduction Congratulations on your purcha se of this outstanding Broadband Router. The DI - 707P is specifically designed for Small Office and Home Office needs. It provides a complete solution for Internet surfing and office resources sharing, and it is easy to configure and operate for even non - te chnical users.
- 5 - l Access Control supported Allows you to assign different access rights for different users. l Virtual Server supported Enables you to expose WWW, FTP and other services on your LAN to be accessible to Internet users.
- 6 - Introduction to Broadband Ro uter Technology A router is a device that forwards data packets from a source to a destination. Routers forward data packets using IP addresses and not a MAC address. A router will forward data from the Internet to a particular computer on your LAN.
- 7 - Introduction to Local Area Networking Local Area Networking (LAN) is the term used when connecting several computers together over a small area such as a buildi ng or group of buildings. LAN’s can be connected over large areas. A collection of LAN’s connected over a large area is called a Wide Area Network (WAN).
- 8 - Point - to - Point Tunneling Protocol (PPTP) PPTP uses proprietary means of connecting two private networks over the Internet. PPTP is a way of securing the information that is communicated between networks. PPTP secures information by encrypting the data inside of a packet .
- 9 - Contents of Package DI - 707P Ethernet Broadband Router Installation CD - ROM Power cord and power ada pter DI - 707P Ethernet Broadband Router.
- 10 - CAT - 5 UTP Fast Ethernet Cable Panel Layout Front Panel M1&M2 System status indicators, Orange . M1 is flashed once per second to indicate system is active. When system is busy, M2 is lighted. Broadband & LAN Ethernet port indicators, Green .
- 11 - Note: The included power adapter is DC 5V/ 2 A. Using the wrong type of power adapter may cause product damage. Rear Panel PRINTER Parallel port connector (25 - pins D - type female.) This is where you will connect the shared printer. ( Optional ) COM Serial por t connector (9 - pins D - type male.
- 12 - Network Settings To use the DI - 707P correctly, you have to properly configure the network settings of your computers. The default IP address of the DI - 707P is 192.168.0.1 , and the default subnet mask is 255.255.255.0. These addresses can be changed as needed, but the default values are used in this manual.
- 13 - 2. Is the TCP/IP of your computers properly configured? If the IP address of the DI - 707P is 192.168.0.1, the IP address of your computer must be 192.168.0.X (where “X” is a number between 2 and 254. Each computer on your network must have a different IP address within that range where “X” represents a number between 2 and 254.
- 14 - Configuring the Ethernet Broadband Router The DI - 707P provides Web based configuration. You can configure your DI - 7 07P through your Netscape Communicator or Internet Explorer browser in MS Windows, Macintosh or UNIX based platforms.
- 15 - Device Information This option allows you to observe the DI - 707P’s working status: A. Modem Status B. Printer Status. The pos sible kinds of printer status include “ Ready ,” “ Not ready ,” “ Printing …, ” and “ Device error .
- 16 - Useful Tools This function enables you to change the administrator password, and get information about the Firmware version and the WAN's MAC Address . At this window you can: • V iew the system logs by clicking the View Log button. • Restart the DI - 707P by clicking the Reboot button.
- 17 - Setup Before you begin the Setup , you must choose the correct WAN type. 1. LAN IP Address : the DI - 707P’s IP address. The default address is 192.168.0.1. You can change the LAN IP Address if needed. 2. WAN Type : your ISP’s WAN Connection type.
- 18 - E nter the proper setting provided by your ISP for the following fields : WAN IP Address, Subnet Mask, Gateway, Primary and Secondary DNS 2. Dynamic IP Address • Host Name : optional.
- 19 - • Set My IP Address as the IP address that the ISP assigned to your PC, e.g. 10.0.0.140. • Set My Subnet Mask as the mask that the ISP assigned to your PC, e.g. 255.255.255.0. • Set Server IP Address as the IP address of the DSL modem, e.
- 20 - DHCP Server The DI - 707P includes a DHCP Server. If you select “Enable” the DHCP Server, and you configure the computers on your network to “Obtain an IP Address automatically,” then when you turn your computer “ON,” it will automatical ly load the proper TCP/IP settings from the DI - 707P.
- 21 - Virtual Server The firewall filters out unrecognized packets to protect your Intranet; so all computers networked with the DI - 707P are invisible to the outside world. If you wish, you can make some of them accessible by enabling the Virtual Server Mapping .
- 22 - Special Applications Some applications require multiple connections, like Internet games, Video conferencing, Internet telephony and so on. Due to the firewall function, these applications cannot work without some inter vention. Special Applications makes some of these applications work with the DI - 707P.
- 23 - Access Control Access Control allows you to assign different access rights for different users. First, you have to divide users into different groups. Users are identified by their IP addresses. You can assign members to Groups 1, 2 and 3 . The others are all members of the Default Group .
- 24 - Miscellaneous Items IP Address of the DMZ Host : The DM Z (Demilitarized Zone) Host is a host without the protection of a firewall. It allows a computer to be exposed to unrestricted 2 - way communication. (Note: this feature should be used only when needed.
- 25 - MAC Address Control MAC Address Control allows you to assign different access rights for different users and to assign a specific IP address to a certain MAC address . MAC Address Control Check Enable to enable the MAC Address Control . All of the settings in this page will take effect only when Enable is checked.
- 26 - MAC Address MAC address indicates a specific client. IP Address Expected IP address of the corresponding client. You may choose to leave this field empty. C When " Connection control " is checked, check " C " to allow the corresponding client to connect to this device.
- 27 - Appendix A: Resetting the System P assword or the IP Address When you forget the system password or the IP address of the DI - 707P, you will need to reset them. Use a null modem cable (an RS - 232 cable) to connect your computer and the DI - 707P using the serial ports of both machines (the c om port on the DI - 707P is a serial port.
- 28 - Appendix B TCP/IP Configuration for Windows 95/98 This section shows you how to install TCP/IP protocol into your personal computer after you have successfully install ed one network card. (If you have not, please refer to your network card manual.
- 29 - 5. Select Microsoft in the Manufacturers list. And choose TCP/IP in the Network Protocols list . Click OK to return to the Network window. 6. The TCP/IP protocol will be listed in the Network window. Click OK to complete the install procedure. Restart your PC to enable the TCP/IP protocol.
- 30 - B.2 Set TCP/IP Protocol for Working with the DI - 707P 1. Go to Start > Settings , then click Control Panel . 2. Double click the Network icon. Select the TCP/IP line that has been associated to your network card in the Configuration tab of the Network window.
- 31 - a. Select Obtain an IP address automatically in the IP Address tab..
- 32 - b. Don’t input any value in the Gateway tab..
- 33 - c. Choose Disable DNS in the DNS Configuration tab.
- 34 - B. The second way to get an IP address is to input one manually as follows: a. Select Specify an IP a ddress in the IP Address tab. The default IP address of the DI - 707P is 192.168.0.1. So please use 192.168.0.xxx (where xxx is between 2 and 254) for the IP Address f ield and 255.
- 35 - b. In the Gateway tab, add the IP address of the DI - 707P (the default IP is 192.168.0.1) in the New gateway field and click the Add button..
- 36 - c. In the DNS Configuration tab, add the DNS values which are provided by the ISP into DNS Server Search Order field and click the Add button..
- 37 - Techni cal Specifications Standards: • IEEE 802.3 10BASET - T Ethernet • IEEE 802.3u 100BASE - TX Fast Ethernet • IEEE 802.3x Flow Control • ANSI/IEEE 802.
- 38 - • 10% ~ 90%.
- 39 - Contacting Technical Support You can find the most recent software and user documentation on the D - Link website. D - Link provides free technical support for customers within the United States for the duration of the warranty period on this product .
- 40 - D - Link Locations Worldwide D - L ink Australia Unit 16, 390 Eastern Valley Way Roseville, NSW 2069, Australia TEL: 61 - 2 - 94177100 FAX: 61 - 2 - 94171077 URL: www.dlink.com.au D - Link Benelux Fellenoord 1305611 ZB EindhovenThe Netherlands TEL: 31 - 40 - 2668713 FAX: 31 - 40 - 2668666 URL: www.
- 41 - FAX: 39 - 02 - 2900 - 1723 URL: www.dlink.it D - Link Japan 10F, 8 - 8 - 15 Nishi - Gotanda Shinagawa - ku, Tokyo 141, Japan TEL: 81 - 3 - 5434 - 9678 FAX: 81 - 3 - 5434 - 9868 URL: www.
- 42 - Limited Warranty D - Link Systems, Inc. (“D - LINK” ) provides this limited warranty for its product only to the person or entity who originally purchased the product from D - Link or its authorized reseller or distributor.
- 43 - Warranty Period, the magnetic media on which D - Link delivers the Software will be free of physical defects. D - Link’s sole obligation shall be to replace the non - conforming Software (or defective media) with software that substantially conforms to D - Link’s functional specifications for the Software.
- 44 - What Is Not Covered: This limited warranty provided by D - Link does not cover : Products that have been subjected to abuse, accident, alteration, modification, tampering, negligence, misuse, f.
- 45 - FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
- 46 - derivative such as translation, transformation, or adaptation without permission from D - Link Corporation/D - Link Systems, Inc., as stipulated by the United States Copyright Act of 1976. Registration Register your DI - 707P online at http://www.
Een belangrijk punt na aankoop van elk apparaat D-Link DI-707P (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen D-Link DI-707P heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens D-Link DI-707P vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding D-Link DI-707P leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over D-Link DI-707P krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van D-Link DI-707P bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de D-Link DI-707P kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met D-Link DI-707P . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
