Gebruiksaanwijzing /service van het product MAGELLAN 3200VSI van de fabrikant Datalogic
Ga naar pagina of 200
Magellan TM 3200VSi On-Count er V er tical Pr esenta tion Scanner Pr oduc t Ref erenc e Guide.
Datalogic Scanning, Inc. 959 T e rry Street Eugene, Oregon 974 02 USA T elephone: (5 41) 683-5700 F ax: ( 541) 345- 7140 An Unpublished W ork - All rights r eser ved .
Prod uc t R efer ence Gui de i Table of Contents Chapter 1. Getting Started ................................................................................................... .. .......................................................... 1 About This Manual .
ii Magellan TM 3200VSi Host Echo ..................................................................................................................... ....................................................................................... 48 Host Echo Quiet Interval .
Prod uc t R efer ence Gui de iii EAN-8 ............... .................... ......................... .................... ..................... .................... ..................... ......................... .................... ................
iv Magellan TM 3200VSi Disable/Enable PDF 417 ........................................................................................................ .......................................................................134 Length Control ..........
Prod uc t R efer ence Gui de v microSD Card Insertion/Removal Indication ......................... .................... ..................... ......................... .................... ......................... ............ 185 Autorun File Processing .
vi Magellan TM 3200VSi NO TES.
Produc t Refere nce Guid e 1 Chapter 1 Getting Star ted The Magellan TM 3200VS i On-Counter V ertical P resentation Scanner is designed for small coun- ter retail checkout environments where there is a r elatively high number of transactions with a fairly small number of items per transaction.
Getting Started 2 Magellan TM 3200VSi C onnecting the S canner The scanner kit you order ed to match your interf ace should provide a comp atible cab le for your installation.
Error Codes Produc t Reference Guide 3 USB Connect ion — Connect the scanner to a USB port on the terminal/PC using the correct USB cable for the interface type you ordered. Refer e nce Figure 1 . IBM Connection — Connect the scanner to the IBM port on the terminal/PC using the cor- rect IBM ca ble .
Getting Started 4 Magellan TM 3200VSi Mount Installation Options for mounting the scanner to a wall or countertop incl ude an L-B racket or stackable Risers (straight or tilted). Figure 2 shows the scanner being seated in an L-Bracket. Figure 3 dem- onstrates the use of stackable Risers.
Mount Installatio n Produc t Reference Guide 5 Figure 3. Using the Risers Wa l l M o u n t Attach the L-Bracket to the wall, securing it in the d esired position with two screws through the two holes in the back fac e of the L-Bracket as shown in Figure 2 .
Getting Started 6 Magellan TM 3200VSi LED and Beeper Indicators The scanner ’ s beeper sounds and its green LE D illuminates to indica te various functions or errors on the scanner .
LED and Beeper Indicators Produc t Reference Guide 7 BEEPER FUNCTIONS BEEPER INDICA TION INDICA TION C OMMENT P ower On Beep Single beep The P ower-On Beep indication is a con figurable f eature which can be enabled or disabled. When enabled, this beep Indi- cates the scanner has finished all its power up tests and is now ready f or operation.
Getting Started 8 Magellan TM 3200VSi Pr ogramming The scanner is typically fact ory-configured with a se t of default features standard to the interface type you or dered.
Bar Code Mask Produc t Reference Guide 9 Bar C ode Mask Cut a hole in this page and r emove it from the manual as indicated to create a sleeve through which bar codes (starting in the following section) can be individually viewed and scanned. It is important that only one bar code at a time be presented to the scanner .
Getting Started 10 Magellan TM 3200VSi Going Green Thank you for using the bar code mask on the oppo si te s ide o f th is pa ge. This man ual h as b een formatted to minimize the quantity of pages needed to pro vide all of the programming bar codes available for this product.
Produc t Refere nce Guid e 11 Chapter 2 Gen er al F e a tu r es Double Read T i meout fo r Linear Labels This Double R ead T im eout feature sets a time limit that determines how much time must pass before reading the same linear label agai n (e.g. two identical items in succession).
General Features 12 Magellan TM 3200VSi Double Read Timeout for Linear Labels — cont. ST AR T / END PROGRAMMING bar code 0.7 Second 0.8 Second 0.9 Second 1 Second.
Double Read Timeout for 2D Labels Produc t Reference Guide 13 Double Read T i meout fo r 2D Labels This Double R ead T im eout feature specifies th e minimum allowable time between consecutiv e good reads of the same PDF 417, Micro PDF 417 Data Matr ix, QR Code, Maxicode, Aztec or Composite label.
General Features 14 Magellan TM 3200VSi Scanner Button Options This feature allows the user to configure the scanner (volume) button to different modes of operation.
Camera But ton Mode Produc t Reference Guide 15 Cam era Bu tt on Mo de Controls the function associated with the "Picture T aking" button Opti ons a re: • N ormal T ake Picture operation .
General Features 16 Magellan TM 3200VSi Au to C ell Phone Mode Auto Cell P hone M ode enables the scanner to read bar codes on a cell phone display without user inter vention. F or high ambient light conditions, button cell phone mode is recommended. (See Camera Button Mode o n page 15.
LED Level Produc t Reference Guide 17 LED Lev el This feature defines the LED intensity level by pulse width. ST AR T / END PROGRAMMING bar codes LED Level = Medium DEF A UL T LED Lev el = Low LED Lev.
General Features 18 Magellan TM 3200VSi A uxiliary Port Mode S pecifies the function associated with the auxillary inter face. Choices are: •D i s a b l e d • 01=Serial Handheld Enabled • 02=PIR.
Auxiliary Port Baud Rate Produc t Reference Guide 19 Au xiliary Port Baud Rate S pecifies baud rate of auxillar y port when operating in PIR/CT mode. ST AR T / END PROGRAMMING bar codes Auxiliary P or.
General Features 20 Magellan TM 3200VSi Pr oduc tivity Inde x Repor ting (PIR) When PIR is enabled, label quality data is appended to decoded data before being presented to the POS. The PIR feature allo ws the scanner to provide information to an external computer , indicating how easy the label was to r ead.
Sleep Mode Produc t Reference Guide 21 Sleep Mode This feature specifies t he amount of time with no bar code reads bef ore t he scanner enters sleep mode.
General Features 22 Magellan TM 3200VSi Sleep Mode — cont. ST AR T / END PROGRAMMING bar codes 6 Minutes 7 Minutes 8 Minutes 9 Minutes 10 Minutes DEF AUL T 12 Minutes 15 Minutes 30 Minutes 1 Hour.
LED and Beeper Indicators Produc t Reference Guide 23 LED and Beeper Indicators Pow er O n A l er t Disables or enables the indication (a single b eep ) that the scanner has finished all its power up tests and is now r eady for operation.
General Features 24 Magellan TM 3200VSi ERI T imeout S pecifies the amount of time the External Read In dicator (ERI) signal is held active for a good read . ST AR T / END PROGRAMMING bar codes Sets the ERI timeout duration using he x valu es from 000 to 255 in increments of ten mi lliseconds (10ms or 0.
LED and Beeper Indicators Produc t Reference Guide 25 Goo d Read: When to Indi cate This feature specifies when the scanner will prov ide indication (beep and/or flash its green LED) upon successfully reading a bar code.
General Features 26 Magellan TM 3200VSi Good Read Beep C ontr ol This feature enables/disables the scanner ’ s ability to beep upon a successful decode of a bar code. Good Read Beep F requency Adjusts the good read beep to sound at a selectab le low , medium or high frequency , selectable from the list below .
LED and Beeper Indicators Produc t Reference Guide 27 Good Read Beep Length S pecifies the duration of a good read beep. ST AR T / END PROGRAMMING bar codes 60msec 80msec DEF AUL T 100msec 120msec 140.
General Features 28 Magellan TM 3200VSi Good Read Beep V olume Selects the bee per volume (loudness) upon a good r ead beep. There ar e three selectable volume levels.
Scanning Features Produc t Reference Guide 29 Scanning F eatures W ake Up Intensity This feature indicates the percentage of ambient light change which will trigger the scanner to wake up from S leep M ode. Low er settings provide greater sensitivity .
General Features 30 Magellan TM 3200VSi Wake Up Intensity — cont. ST AR T / END PROGRAMMING bar codes 13% 14% 15%.
Produc t Refere nce Guid e 31 Chapter 3 Image Captur e Image Capture How t o Capture an Image There ar e two methods of capturing images as discussed below: • Image Capture to a microSD Card by Scan.
Image Capture 32 Magellan TM 3200VSi Image Capture to the Host b y Host Command This feature is only available fo r RS-232 and USB COM interfaces. The host command format is as follows: P<cnt>pS.
Image Compression Produc t Reference Guide 33 Image C ompression S pecifies the starting image compression factor for JPEG images. A higher numb er specifies a higher quality image with less compression than a r elative lower number for the same image.
Image Capture 34 Magellan TM 3200VSi Image Size S pecifies the size of the image capture. Choices are: •V G A •W V G A •S X G A , F u l l S i z e •C I F ST AR T / END PROGRAMMING bar codes Ima.
Image Brightness Produc t Reference Guide 35 Image Brightness This feature sets the image brightness value. F ollo w these instructions to configure this featur e: 1.
Image Capture 36 Magellan TM 3200VSi NO TES.
Produc t Refere nce Guid e 37 Chapter 4 Inter fa c e Related F eature s At the time of this writing, the reader supports the interfaces listed in Ta b l e 1 . Select the desired interface type from the table, then reference the page number given for the customizable featur es section associated with each interf ace.
Interface Related Features 38 Magellan TM 3200VSi Table 2. Keyboard Wedge Interface Referen ce I/F T ype PCs Suppor ted A PC/XT w/Alter nate K ey Encoding B A T , PS /2 25-286, 30-286, 50, 50Z, 60, 70.
Interface Selection Produc t Reference Guide 39 Inte r face Selection ST AR T / END PROGRAMMING bar codes RS-232 Standard RS-232 Wincor-Nixdorf IBM 4683 P or t 5B IBM 4683 P or t 9B IBM 4683 P or t 17.
Interface Related Features 40 Magellan TM 3200VSi Interface Selection — cont. ST AR T / END PROGRAMMING bar codes K eyboard W edge A K eyboard W edge B K eyboard Wedge C K eyboard W edge D K eyboard.
Interface Features Produc t Reference Guide 41 Inter face F eatures Obey/Ignore Host C ommands When set to ignore host commands, the scanner will ignore all host commands ex cept for the minimum set necessar y to keep the interface active and transmit labels F or normal operation of the interface, select Obey Host Commands.
Interface Related Features 42 Magellan TM 3200VSi Interface Features — cont. Host T ransmission Buffers S pecifies the number of host transmission(s) that may be buffered. B y buffering data from a bar code, the scanner can continue to r ead a new bar code while the old one is being transmitted to the host.
Interface Features Produc t Reference Guide 43 RS-232 Inter fac e F eatur es ST AR T / END PROGRAMMING bar codes Baud Rate 1200 Baud 2400 Baud 4800 Baud 9600 Baud DEF A UL T 19200 Baud 38400 Baud 5760.
Interface Related Features 44 Magellan TM 3200VSi RS-232 Interface Features — cont. ST AR T / END PROGRAMMING bar codes Data Bits 7 Data Bits 8 Data Bits DEF A UL T Stop Bits 1 Stop Bit DEF AUL T 2 .
Interface Features Produc t Reference Guide 45 RS-232 Interface Features — cont. Hardware Flow Control Disable Hardw are Control— The scanner transmits to the host regardless of any activity on the CTS line. Enable CTS Flow Control— The CTS signal controls transmission of data to the host.
Interface Related Features 46 Magellan TM 3200VSi RS-232 Interface Features — cont. Interchara cter Delay This delay is inserted after each data character tr ansmitted. If the transmission speed is too high, the system may not be able to receive all charac ters.
Interface Features Produc t Reference Guide 47 Intercharacter Delay — cont. So ft ware Flow Cont rol Disables/Enables software cont rol using X ON/ X O FF characters.
Interface Related Features 48 Magellan TM 3200VSi RS-232 Interface Features — cont. Host Ec ho When enabled, this feature passes all data throug h the scanner to the host as it comes in. This feature is u sed for applications where “ daisy ch aining” of RS -232 devices onto the same cable is necessary .
Interface Features Produc t Reference Guide 49 RS-232 Interface Features — cont. Host Echo Quiet Interval This setting specifies the time interval of RS-232 channel inactivity which must transpire befor e the scanner will break the host echo loop to transmit the bar code data that has just been scanned to the host.
Interface Related Features 50 Magellan TM 3200VSi Host Echo Quiet I nterval — cont. Signal V oltage: Normal/T TL S pecifies whether the RS-232 interface provides TTL levels on the output pins TxD and R TS.
Interface Features Produc t Reference Guide 51 RS-232 Inv ert Enables/disables inversion of RS-232 TXD and RXD signals. Beep on ASCII BEL Enables/disables ability of scanner to beep (sou nd a good r ead tone) on receiving an ASCII BEL (07 hex).
Interface Related Features 52 Magellan TM 3200VSi Beep on Not on File Select for the host to beep (or not) when a not-on -file (host command) condition is detected by the host.
Interface Features Produc t Reference Guide 53 AC K NA K O p t i o n s This enables/disables the ability of the scan ner to support the RS-2 32 ACK/NAK pr otocol. When configured, the scanner and/or host sends an “ A CK” when it receives data properly , and sends “NAK” when the data is in error .
Interface Related Features 54 Magellan TM 3200VSi RS-232 Interface Features — cont. A CK Character NAK Character ST AR T / END PROGRAMMING bar codes Sets the ACK char acter from the set of ASCII characters or an y decimal v alue from 000 to 255. P ad entries of less than three di gits with zeros , as in “005”.
Interface Features Produc t Reference Guide 55 RS-232 Interface Features — cont. Retr y on A CK NAK T imeout Enables/disables retry after the configurable ACK NAK T imeout V alue (set in the following fea- ture ) has expi red.
Interface Related Features 56 Magellan TM 3200VSi RS-232 Interface Features — cont. AC K NA K R e t r y C ou n t ST AR T / END PROGRAMMING bar codes This feature sets the number of times f or the scanner to retry a label transmi ssion under a retr y condition.
Interface Features Produc t Reference Guide 57 RS-232 Interface Features — cont. A CK NAK Error Handling This item specifies the method the scanner will use to handle errors detect ed while waiting to receive the ACK character from the host. Errors include unrecognized host commands and com - munication errors such as parity or framing err ors.
Interface Related Features 58 Magellan TM 3200VSi RS-232 Interface Features — cont. T ransmission F ailure Indication Enables/disables bad-label indication upon transmission failure. Single Cable RS-232 Single Cable RS-232 Options The RS-232 S ingle Cable interface shar es some configuration options with other RS-232 inter- faces.
Single Cable RS-232 Produc t Reference Guide 59 Single Cable RS-232 RTS CTS Selec tion S pecifies how R TS and CTS are used to contr ol the data flow . R TS is controlled by the Scanner and can be continuously held high/low , or can be asserted during label transmission.
Interface Related Features 60 Magellan TM 3200VSi Single Cable RS-232 Use BC C Enables/disables the ab ility of the scanner to use BCC. Single Cable RS-232 Use A CK/NAK Enables/disables the ab ility of the scanner to use A CK/NAK.
Single Cable RS-232 Produc t Reference Guide 61 Single Cable RS-232 Use STX Enables/disables the ab ility of the scanner to use STX. Set Single Cable RS-232 ST X Character This feature selects the STX character . T o specify the STX Character: 1. Scan the ST AR T/EN D bar code.
Interface Related Features 62 Magellan TM 3200VSi Single Cable RS-232 Use ETX Enables/disables the ab ility of the scanner to use ETX. Set Single Cable RS-232 ET X Character Allows selection of the ETX character . T o specify the ET X Character: 1. Scan the ST AR T/EN D bar code.
Single Cable RS-232 Produc t Reference Guide 63 Single Cable P acesetter Plus Enables/disables sending P acesetter Plus i nformation as trailers to UPC/EAN labels. Single Cable Da talogic Extensions Enables Datalogic Scanning, Inc. extensions to the Single Cable RS-232 interface.
Interface Related Features 64 Magellan TM 3200VSi USB- OEM Inter face F eatures USB- OEM Devic e usage The USB-OEM protocol allows for the scanner to be identified as one of two different types of bar code scanners.
Single Cable RS-232 Produc t Reference Guide 65 Key b oa rd W e dg e and USB Ke yboard As a keyboard interface, the sc anner supports most popular PCs and IBM terminals. The instal- lation of the wedge is a fairly simple pr ocess that doesn ’ t require any changes of softwar e or har d- ware.
Interface Related Features 66 Magellan TM 3200VSi Keyboard Wedge — c ont. ST AR T / END PROGRAMMING bar codes Italy Norwa y P or tugal Spain Sweden Switzerland Japan 106 K ey Hungar y Czech Repub li.
Single Cable RS-232 Produc t Reference Guide 67 Keyboard Wedge — c ont. Cap s Loc k St ate S pecifies the format in which the scanner sends character data.
Interface Related Features 68 Magellan TM 3200VSi Keyboard Wedge — c ont. P ower-On Simulation All PCs check the keyboard status during the po wer-on S elftest. I t is recommended that you enable this function if you are working without a keyboard installation.
Single Cable RS-232 Produc t Reference Guide 69 Con tr ol Ch ar ac t er s S pecifies how the scanner transmits ASCII co ntrol characters to the host. Choices are: • Disable Control Characters • Enable transmission of control characters to host • Send characters b etween 00H and 1FH acco rding to a special function-key mapping table.
Interface Related Features 70 Magellan TM 3200VSi Keyboard Wedge — c ont. W edge Quiet Inter val Quiet Interval is the amount of time to look fo r keyboard activity before the scanner breaks the keyboard connection in or der to transmit data to the host.
USB COM Interface Set-up Produc t Reference Guide 71 Keyboard Wedge — c ont. Intercharac ter Delay USB C OM Inter fac e Set-up The scanner has two USB COM interfaces, US B COM and USB COM DL (Datalogic). The Datalogic USB-COM driver works for both USB COM interfaces.
Interface Related Features 72 Magellan TM 3200VSi NOTES.
Produc t Refere nce Guid e 73 Chapter 5 Data Editing Data Editing Ov er view When a bar code is scanned, additional inform ation can be sent to the host computer along with the bar code data. This combination of bar code data and supplementar y user- defined data is called a “ message string.
Data Editing 74 Magellan TM 3200VSi Global Pr efix/Suffix U p to 20 ASCII characters may be added as a pref ix (in a position before the bar code data) and/ or as a suffix (in a position following the bar code data) as indicated in Figure 5-2 . Figure 5-2.
Global Prefix/Suffix Produc t Reference Guide 75 Global Prefix/Suffix — cont. ST AR T / END PROGRAMMING bar codes Sets up to 20 characters each from the set of ASCII characters or any hex v alue from 00 to FF .
Data Editing 76 Magellan TM 3200VSi AIM ID AIM (Automatic I dentification Manufacturers) la bel identifiers ar e assi gned from a globally standardized list — as opposed to custom label ID characters you select y ourself — and can be included with scanned bar code data.
Label ID Produc t Reference Guide 77 Label ID A Label ID is used to identify a bar code (symbology) type. See Appendix D , F actor y Defa ult Set- tings , for a listing for common symbologies. It can be appended previous to or follo wing the transmitted bar code data depending upon how th is option is enabled.
Data Editing 78 Magellan TM 3200VSi Label ID — cont. ST AR T / END PROGRAMMING bar codes Label ID T ransmission: Disab le Label ID P osition Label ID P osition: Before Bar Code Data DEF A UL T Label.
Label ID Produc t Reference Guide 79 Label ID — cont. ST AR T / END PROGRAMMING bar codes DEF AUL T SETTING FOR THIS FEA TURE: E (45 hex) Set UPC-E w/P2 Addon Label ID Character(s) Set UPC-E w/P5 Ad.
Data Editing 80 Magellan TM 3200VSi Label ID — cont. ST AR T / END PROGRAMMING bar codes DEF A UL T SETTING FOR THIS FEA TURE: F (46 hex) Set EAN-13 w/P2 Addon Label ID Character(s) Set EAN-13 w/P5 .
Label ID Produc t Reference Guide 81 Label ID — cont. ST AR T / END PROGRAMMING bar codes DEF AUL T SETTING FOR THIS FEA TURE: G8 (4738 hex) Set GTIN w/C128 addon Label ID Character(s) Set GS1 Omnid.
Data Editing 82 Magellan TM 3200VSi Label ID — cont. ST AR T / END PROGRAMMING bar codes DEF A UL T SETTING FOR THIS FEA TURE: % (25 hex) Set Codabar Label ID Character(s) Set Code 93 Label ID Chara.
Label ID Produc t Reference Guide 83 Label ID — cont. NO TE For the 2D symbologies on this page, the Label ID is 4 bytes. The fir st 3 bytes are characters f or the label ID . A 00 (hex) value in the fir st 3 bytes indicates the end of the label ID characters.
Data Editing 84 Magellan TM 3200VSi Case C on version This feature can convert scanned bar code data to either all lower case (a through z) or all upper case (A through Z) characters . NO TE Case con version aff ects ONL Y scanned bar code data, and does not affect Label ID , P refix, Suffix, or other appended data.
Character Conversion Produc t Reference Guide 85 Character C onv ersion Character conversion is an eight byte configurati on item. The eight bytes are 4 character pairs represented in hexadecimal ASCII values. The first character in the pair is the character that will be converted.
Data Editing 86 Magellan TM 3200VSi NOTES.
Produc t Refere nce Guid e 87 Chapter 6 Sy m b o l o g i e s The scanner supports the following symbologies (b ar code types). O ptions for each symbology are included in this chapter . Factory Defaults— for the standard RS-232 interface are indicated in bold text throughout this section.
Symbologies 88 Magellan TM 3200VSi UPC-A — c ontinued Check Digit T ransmission Enable this option to transmit the check digit along with UPC-A bar code data. Number Sy stem T ransmission This feature enables/disables transmission of UPC-A System N umber .
UPC-A Produc t Reference Guide 89 UPC-A — c ontinued Expand UPC-A to EAN-13 Expands UPC-A data to the EAN-13 data format. Selecting this feature also changes the sym- bology ID to match those required for EAN-13.
Symbologies 90 Magellan TM 3200VSi UPC-E The following options apply to the UPC-E symbology . Disable/Enable UPC-E When disabled, the scanner will not read UPC-E bar codes. Check Digit T ransmission Enable this option to transmit the check digit along with UPC-E bar code data.
UPC-E Produc t Reference Guide 91 UPC-E — con tinued Number Sy stem Digit The N umber System Digit (NSD) which is always a zero (0) in the leading position can be optionally included (or not) with scanned bar code data. Expand to UPC-E to UPC-A Enables/disables expansion of UPC-E labels to UPC-A.
Symbologies 92 Magellan TM 3200VSi UPC-E — con tinued Expand UPC-E to EAN13 Enables/disab les expansion of UPC-E l abels to EAN-13. Selecting this feature also changes the symbology ID to match those required for EAN-13.
UPC-E Produc t Reference Guide 93 GTIN The following options apply to the GTIN label data format. Expand UPC/EAN to GTIN When this feature is enabled, the scanner will translate U PC/EAN labels to the 14 digit GTIN format.
Symbologies 94 Magellan TM 3200VSi EAN-13 The following options apply to the EAN-13 symbology . Disable/Enable EAN-13 When disabled, the scanner will not read EAN-13 bar codes. Check Digit T ransmission Enable this option to transmit the check digit along with EAN-13 bar code data.
EAN-13 Produc t Reference Guide 95 EAN-13 — continued EAN-13 Flag 1 C haracter Enables/disables transmission of an EAN/JAN13 Flag1 character . ISBN When enabled, this feature truncates the leading three digits from labels that contain ISBN (International S tandard Book Number) and append s an ISBN check character to the end of the label.
Symbologies 96 Magellan TM 3200VSi EAN-8 The following options apply to the EAN-8 symbology . Disable/Enable EAN-8 When disabled, the scanner will not read EAN-8 bar c odes. Check Digit T ransmission Enable this option to transmit the check Digit along with EAN-8 bar code data.
EAN-8 Produc t Reference Guide 97 EAN-8 — continued Expand EAN-8 to EAN-13— Expands EAN-8 data to the EAN-13 data format. Selecting this feature also changes the symbology ID to match those required for EAN-13.
Symbologies 98 Magellan TM 3200VSi EAN T w o -Label Enables/disables the ability of the scanner to decode EAN two-label pairs. EAN T w o -Label C o mbined T r ansmission Enables/disables the transmitting of an EAN two label pair as one label.
Price Weight Check Digit Produc t Reference Guide 99 Pric e W eight Check Digit Enables/disables calculation and verification of price/weight check digits.
Symbologies 100 Magellan TM 3200VSi Add-ons Add-ons (or supplemental characters) are commo nly added to the end of UPC/EAN bar codes. The scanner will read the add-ons if they are en abled and in the field of view . Three add-on types are supported: 2-digit, 5-digit and Code 128 add-ons.
Add-ons Product Reference Guide 101 Add-ons — continued ST AR T / END PROGRAMMING bar codes Disable Optional 2-Digit Ad d-ons DEF AUL T Enable Optional 2-Digit Add-ons Disable Optional 5-Digit Ad d-.
Symbologies 102 Magellan TM 3200VSi GS1 DataBar Omnidirec tional / Stack ed Omnidirec tional The following options apply to the GS1 DataB ar Omnidirectional symbology . Disable/Enable GS1 DataBar Omnidire ctional When this feature is disabled, the scann er will not read GS1 DataB ar Omnidirectional bar codes.
GS1 DataBar Expanded / Expanded Stacked Product Reference Guide 103 GS1 DataBar Expanded / Expanded Stacked The following options apply to the GS1 D ataBar Ex panded symbology . Disable/Enable GS1 DataBar Expanded When this feature is disabled, the scann er will not re ad GS1 DataBar Expanded bar codes.
Symbologies 104 Magellan TM 3200VSi GS1 DataBar Expanded / Expa nded Stacked — c ontinued Len gth Control Fixed Length Decoding— When fixed length decoding is enabled, the scanner will decode a bar code if the label length matches one of the configurable fixed lengths.
GS1 DataBar Expanded / Expanded Stacked Product Reference Guide 105 GS1 DataBar Expanded / Expa nded Stacked — c ontinued GS1 DataBar Expanded L ength 1, Length 2 P rogramming Instructions 1. Scan the ST AR T/EN D bar code. 2. Scan either the Set Length 1 or Set Length 2 bar code.
Symbologies 106 Magellan TM 3200VSi GS1 DataBar Expanded / Expa nded Stacked — c ontinued Co up o n R ea d Con t ro l This feature controls coupon reading.
GS1 DataBar Limited Product Reference Guide 107 GS1 DataBar Limited The following options apply to the GS1 DataB ar Limited symbology . Disable/Enable GS1 DataBar Limited When this feature is disabled, the scanner will not read GS1 DataBar Limited bar codes.
Symbologies 108 Magellan TM 3200VSi Co d e 3 9 The following options apply to the Code 39 symbology . Disable/Enable C ode 39 When this feature is disabled , the scanner will not read Code 39 bar c odes. Check Character Calcula tion When enabled, the scanner will calculate the check character of the labels.
Code 39 Product Reference Guide 109 Check Character T ransmit Enable this option to transmit the check character with scan ned bar code data. Start/Stop Characters Enables/disables transmission of Code39 start and stop characters.
Symbologies 110 Magellan TM 3200VSi Code 39 F ull ASCII Enables/disables the translation of Code 39 characters to Code 39 full-ASCII characters . ST AR T / END PROGRAMMING bar codes Disable Code 39 Fu.
Code 39 Product Reference Guide 111 C ode 39 — continued Len gth Control Fixed Length Decoding— When fixed length decoding is enabled, the scanner will decode a bar code if the label length matches one of the configurable fixed lengths.
Symbologies 112 Magellan TM 3200VSi Code 39 L ength 1, Length 2 Pr ogramming Instructions 1. Scan the ST AR T/EN D bar code. 2. Scan either the Set Length 1 or Set Length 2 bar code. 3. T u rn to Appendix C, Alpha-Numeric P ad and scan the two di gits (zero padded) representing the length in decimal notation.
Code 32 Italian Pharmacode Product Reference Guide 113 C ode 32 Italian Pharmacode The following options apply to the Code 32 I talian Pharmacode symbology . Disable/Enable C ode 32 Italian Pharmacode When this feature is disabled, the scann er will not read Code 32 I talian Pharmacode bar codes.
Symbologies 114 Magellan TM 3200VSi Code 32 Italian Pharmacode — continued Check Character T ransmit Enable this option to transmit the check character with scan ned bar code data.
Code 128 Product Reference Guide 115 C ode 128 The following options apply to the Code 128 symbology . Disable/Enable C ode 128 When this feature is disabled, the scann er will not read Code 128 bar codes. Disable/Enable EAN 128 When this feature is disabled, the scann er will not read EAN 128 bar codes.
Symbologies 116 Magellan TM 3200VSi C ode 128 — continued T ransmit F unc tion Characters Enables/disables transmission of Code 12 8 function characters 1, 2, 3, and 4.
Code 128 Product Reference Guide 117 C ode 128 — continued Len gth Control Fixed Length Decoding— When fixed length decoding is enabled, the scanner will decode a bar code if the label length matches one of the configurable fixed lengths.
Symbologies 118 Magellan TM 3200VSi C ode 128 — continued C ode 128 Length 1, Length 2 P rogramming Instructions 1. Scan the ST AR T bar code. 2. Scan either the Set Length 1 or Set Length 2 bar code. 3. T u rn to Appendix C, Alpha-Numeric P ad and scan the two di gits (zero padded) representing the length in decimal notation.
Interleaved 2 of 5 Product Reference Guide 119 Inte rleav ed 2 of 5 The following options apply to the I nterleaved 2 of 5 (I 2 of 5) symbology . Disable/Enable Interlea ved 2 of 5 When this feature is disabled, the scann er will not read I nterleaved 2 of 5 bar codes.
Symbologies 120 Magellan TM 3200VSi Interlea ved 2 of 5 — c ontinued Check Digit T ransmit Enable this option to transmit the check digit with scanned bar code data.
Interleaved 2 of 5 Product Reference Guide 121 Interlea ved 2 of 5 — c ontinued Len gth Control Fixed Length Decoding— When fixed length decoding is enabled, the scanner will decode a bar code if the label length matches one of the configurable fixed lengths.
Symbologies 122 Magellan TM 3200VSi Interlea ved 2 of 5 — c ontinued Interleav ed 2 of 5 Le ngth 1, Length 2 Pr ogramming Instructions 1. Scan the ST AR T bar code.
Codabar Product Reference Guide 123 Co d ab a r The following options apply to the Codabar symbology . Disable/Enable C odabar When this feature is disabled , the scanner will not read Codabar bar cod es. Check Character V e rification When enabled, the scanner wil l verify the check character of the labels.
Symbologies 124 Magellan TM 3200VSi Check Character T ransmit Enable this option to transmit the check character with scan ned bar code data. ST AR T / END PROGRAMMING bar codes Disable Chec k Char T .
Codabar Product Reference Guide 125 Co d ab a r — co nt i n u ed Len gth Control Fixed Length Decoding— When fixed length decoding is enabled, the scanner will decode a bar code if the label length matches one of the configurable fixed lengths.
Symbologies 126 Magellan TM 3200VSi Co d ab a r — co nt i n u ed C odabar Length 1, Length 2 P rogramming Instructions 1. Scan the ST AR T bar code. 2. Scan either the Set Length 1 or Set Length 2 bar code. 3. T u rn to Appendix C, Alpha-Numeric P ad and scan the two di gits (zero padded) representing the length in decimal notation.
Codabar Product Reference Guide 127 Co d ab a r — co nt i n u ed Start/Stop Character T ype Codabar has four pairs of S tart/Stop patterns. S elect one pair to match your application. Start/Stop Charac ter T ransmission The transmission of start and end char acters of Codabar is selected below .
Symbologies 128 Magellan TM 3200VSi Start/Stop Character Match This feature enables/disables the requirem ent that start and stop characters match . ST AR T / END PROGRAMMING bar codes Disable Start/S.
Code 93 Product Reference Guide 129 Co d e 9 3 The following options apply to the Code 93 symbology . Disable/Enable C ode 93 When this feature is disabled, the scann er will not read Code 93 bar codes.
Symbologies 130 Magellan TM 3200VSi C ode 93 — continued Len gth Control Fixed Length Decoding— When fixed length decoding is enabled, the scanner will decode a bar code if the label length matches one of the configurable fixed lengths.
Code 93 Product Reference Guide 131 C ode 93 — continued C ode 93 Length 1, Length 2 Pr ogramming Instructions 1. Scan the ST AR T bar code. 2. Scan either the Set Length 1 or Set Length 2 bar code. 3. T u rn to Appendix C, Alpha-Numeric P ad and scan the two di gits (zero padded) representing the length in decimal notation.
Symbologies 132 Magellan TM 3200VSi NO TES.
Produc t Refere nce Guid e 133 2D S ymbologies 2D Symbologies The scanner supports the 2D symbologies (bar code types) listed below . A vailable options for each 2D symbology are included in this chapter . Factory Defaults— for the standard RS-232 interface are indicated in bold text throughout.
2D Symbologies 134 Magellan TM 3200VSi PDF 417 Disable/Enable PDF 417 When disabled, the scanner will not read PDF 417 b ar codes. ST AR T / END PROGRAMMING bar codes Disable PDF 417 Enable PDF 417 DE.
2D Symbologies Product Reference Guide 135 PDF 417 — continued Leng th Contro l Fixed Length Decoding— When fixed length decoding is enabled, the scanner will decode a bar code if the label length matches one of the configurable fixed lengths.
2D Symbologies 136 Magellan TM 3200VSi PDF 417 — continued PDF 417 Length 1, Length 2 Pr ogramming Instructions 1. Scan the ST AR T bar code. 2. Scan either the Set Length 1 or Set Length 2 bar code. 3. T u rn to Appendix C, Alpha-Numeric P ad and scan the four digits (zero-padded) r epresenting the length.
2D Symbologies Product Reference Guide 137 Micro PDF 417 Disable/Enable Micro PDF 417 When disabled, the scanner will not read Micro PDF 417 bar codes.
2D Symbologies 138 Magellan TM 3200VSi Micro PDF 417 — continued Leng th Contro l Fixed Length Decoding— When fixed length decoding is enabled, the scanner will decode a bar code if the label length matches one of the configurable fixed lengths.
2D Symbologies Product Reference Guide 139 Micro PDF 417 — continued Micro PDF 417 Length 1, L ength 2 P rogramm ing Instructions 1. Scan the ST AR T bar code. 2. Scan either the Set Length 1 or Set Length 2 bar code. 3. T u rn to Appendix C, Alpha-Numeric P ad and scan the four digits (zero-padded) r epresenting the length.
2D Symbologies 140 Magellan TM 3200VSi Datamatrix Disable/Enable Datamatrix When disabled, the scanner will not read Datamatrix bar codes. ST AR T / END PROGRAMMING bar codes Disable Datamatrix Enable.
2D Symbologies Product Reference Guide 141 Datamatrix — continued Leng th Contro l Fixed Length Decoding— When fixed length decoding is enabled, the scanner will decode a bar code if the label length matches one of the configurable fixed lengths.
2D Symbologies 142 Magellan TM 3200VSi Datamatrix — continued Datamatrix L ength 1, Length 2 Pr ogramming Instructions 1. Scan the ST AR T bar code. 2. Scan either the Set Length 1 or Set Length 2 bar code. 3. T u rn to Appendix C, Alpha-Numeric P ad and scan the four digits (zero-padded) r epresenting the length.
2D Symbologies Product Reference Guide 143 QR C ode Disable/Enable QR Code When disabled, the scanner will not read QR Code labe ls. ST AR T / END PROGRAMMING bar codes Disable QR Code DEF AUL T Enabl.
2D Symbologies 144 Magellan TM 3200VSi QR Code — continued Leng th Contro l Fixed Length Decoding— When fixed length decoding is enabled, the scanner will decode a bar code if the label length matches one of the configurable fixed lengths.
2D Symbologies Product Reference Guide 145 QR Code — continued QR C ode Length 1, Le ngth 2 Progr amming Instructions 1. Scan the ST AR T bar code. 2. Scan either the Set Length 1 or Set Length 2 bar code. 3. T u rn to Appendix C, Alpha-Numeric P ad and scan the four digits (zero-padded) r epresenting the length.
2D Symbologies 146 Magellan TM 3200VSi Maxicode Disable/Enable Maxicode When disabled, the scanner will not read Maxicode labels. ST AR T / END PROGRAMMING bar codes Disable Maxicode DEF AUL T Enable .
2D Symbologies Product Reference Guide 147 Maxicode — continued Leng th Contro l Fixed Length Decoding— When fixed length decoding is enabled, the scanner will decode a bar code if the label length matches one of the configurable fixed lengths.
2D Symbologies 148 Magellan TM 3200VSi Maxicode — continued Max ico de Le ngt h 1, Len gth 2 Pro gramm ing In str uc ti ons 1. Scan the ST AR T bar code. 2. Scan either the Set Length 1 or Set Length 2 bar code. 3. T u rn to Appendix C, Alpha-Numeric P ad and scan the four digits (zero-padded) r epresenting the length.
2D Symbologies Product Reference Guide 149 Aztec Disable/Enable Aztec When disabled, the scanner will not read Aztec labels. ST AR T / END PROGRAMMING bar codes Disable Aztec DEF AUL T Enable Aztec.
2D Symbologies 150 Magellan TM 3200VSi Aztec — continued Leng th Contro l Fixed Length Decoding— When fixed length decoding is enabled, the scanner will decode a bar code if the label length matches one of the configurable fixed lengths.
2D Symbologies Product Reference Guide 151 Aztec — continued Aztec Length 1, Length 2 Programming Instructions 1. Scan the ST AR T bar code. 2. Scan either the Set Length 1 or Set Length 2 bar code. 3. T u rn to Appendix C, Alpha-Numeric P ad and scan the four digits (zero-padded) r epresenting the length.
2D Symbologies 152 Magellan TM 3200VSi Co mp os i te L a be l s Disable/Enable GS1 DataBar Omnidirectional 2D Com ponent When enabled, if a GS1 DataBar Omnidirectiona l label is decoded which has the 2D linkage flag set, the 2D component must also be de coded or the base label will be discarded.
2D Symbologies Product Reference Guide 153 Disable/Enable GS1 DataBar Limited 2D C omponent When enabled, if a GS1 DataBar Limited label is decoded whic h has the 2D linkage flag set, the 2D component must also be decoded or the base label will be discarded.
2D Symbologies 154 Magellan TM 3200VSi NOTES.
Produc t Refere nce Guid e 155 A dvanc ed Decoding F eatur es In v erse Label Reading This controls the method of reading inverse labels (white label on black background).
Advanced Decoding Features 156 Magellan TM 3200VSi NOTES.
Produc t Refere nce Guid e 157 Appendix A Pr oduc t Specifications Optical and Read P er formance P arameters Scanner Dimensions Pa rameter Specification Scan V olume 250 cubic inches Minimum Resolution 5 mil Depth of Field (100% UPC Labels) 0 - 8” (0 - 20.
158 Magellan TM 3200VSi Ph ysical Pr oper ties Electrical Par ameters Environ ment al Paramete rs Other Para meters Pa rameter Specification Dimensions (Scanner only): 6” x 5.
Other Parameters Product Reference Guide 159 NOTES.
160 Magellan TM 3200VSi NOTES.
Produc t Refere nce Guid e 161 Appendix B Ca ble Pinouts Stan dard Cab le Pinout s (P rimar y Inter face Cables) Cable P i nouts (Handheld Scanne r A ttached via the Aux P or t) Pin # RS-232 IBM Po rt.
162 Magellan TM 3200VSi NOTES.
Produc t Refere nce Guid e 163 Appendix C Alpha-Numeric P ad A B C D E F.
164 Magellan TM 3200VSi Alpha-Numeric Pad 1 2 3 0 9 8 7 6 5 4.
Produc t Refere nce Guid e 165 Appendix D F ac tor y Default Settings Fa c t o r y D e f a u l t s b y I n t e r f a c e The following is a partial list of key settings for each interface type.
166 Magellan TM 3200VSi Host T r ansmission Buffers 222222 Baud Rate 9600 9600 9600 9600 9600 9600 Data Bits 888888 Stop Bits 111111 Pa r i t y None None None None None None Hardware Flow Control Disa.
Factory Defaults by Inte rface Product Reference Guide 167 Set Single Cab le RS-232 ETX Character 0D Single Cable P acesetter Plus Disable Single Cable Datalogic Extensions Disable USB-OEM Interf ace .
168 Magellan TM 3200VSi Expand UPC/EAN to GTIN Don’t Expand Don’t Expand Don’t Expand Don’t Expand Don’t Expand Don’t Expand Disable/Enab le EAN-13 Enable Enable Enab le Enable Enable Enab.
Factory Defaults by Inte rface Product Reference Guide 169 Length Control Va r i a b l e 02/50 Va r i a b l e 02/50 Va r i a b l e 02/50 Va r i a b l e 02/50 Va r i a b l e 02/50 Va r i a b l e 02/50 .
170 Magellan TM 3200VSi Length Control Va r i a b l e 0001/0366 Va r i a b l e 0001/0366 Va r i a b l e 0001/0366 Va r i a b l e 0001/0366 Va r i a b l e 0001/0366 Va r i a b l e 0001/0366 Disable/Ena.
Produc t Refere nce Guid e 171 Appendix E K eyboard F unc tion K ey Mappings K eyboard Model Cr oss Refer e nc e Ta b l e E - 1 summarizes the keyboard models, their defined protoc ol, scancode set, and some unique featur es. The remaining tables in this chapter pro vide the function key maps associated with each of the scancode sets.
172 Magellan TM 3200VSi Table E-2. USB Fun ction Key Usage Map ASCII Ke y value Usage Name Modifier/ Scancode 02 STX F11 00h 44h 03 ETX F12 00h 45h 04 EO T GUI right Make 80h 00h 05 ENQ GUI right Brea.
Keyboard Model Cross Reference Product Reference Guide 173 Table E-3. Scanset 1 Function K ey Map Table E-4. Scanset 2 Function K ey Map ASCII (hex) ASCII code K ey Scancode 02 STX AL T left Make 38h .
174 Magellan TM 3200VSi Table E-5 . Scanset 3, 102-Ke y Function Key Map 1D GS F8 0Ah 1E RS F9 01h 1F US F10 09h ASCII (hex) ASCII code Ke y Scancode 02 STX AL T left Make 19h 03 ETX AL T left Break F.
Keyboard Model Cross Reference Product Reference Guide 175 Table E-6. Scanset 3 122-Key Funct ion Key Map ASCII (hex) ASCII code Key Scancode 02 STX AL T left Make 19h 03 ETX AL T left Break F0h 19h 0.
176 Magellan TM 3200VSi Table E-7. Japanese DOS Function Key Map ASCII value ASCII code Key Scancode 02h STX AL T left Make 31h 03h ETX AL T left Break B1h 04h EO T CTRL left Mak e 41h 05h ENQ CTRL le.
Keyboard Model Cross Reference Product Reference Guide 177 Table E-8. NEC 98 01-Key Function Key Map ASCII value ASCII code Key Scancode 00h NUL un used n/a 01h SOH CR 1Ch 02h STX CAPS LOCK ON (mak e).
178 Magellan TM 3200VSi NOTES.
Produc t Refere nce Guid e 179 Ap pend ix F Host C ommands Ac cepting RS-232 Commands The scanner responds to the following RS-232 commands: If one of the abo ve commands is received, the scanner wi ll perform the steps indicated for the command. H ost commands for other interfaces are also availa ble.
180 Magellan TM 3200VSi NOTES.
Produc t Refere nce Guid e 181 Appendix G Sam ple S ym bo ls 1D Symbol Samples 0 1234567890 UPC-A 05 1234567890 Interleav ed 2 of 5 Code 128 Code 128 9 780330 290951 EAN-13 BC321 Code 39 A13579B Codab.
182 Magellan TM 3200VSi 1D Symbol Samples — continued 0100123456789050 GS1 DataBar Expanded (01)00123456789012 GS1 DataBar Omnidirectional 123456 Code 2 of 5 (01)16543210987654 GS1 DataBar Limited.
2D Sample Symbols Product Reference Guide 183 2D Sample Symbols A12B3C BV17453 1314H17L L PDF 417 Micro PDF 417 Datamatrix QR Code 35900G9 Maxicode Aztec This is an Aztec Code 111TUVCCIUL7-1.
184 Magellan TM 3200VSi C omposite Sample Symbols GS1 DataBar Limited Composite GS1 DataBar T runcated Composite.
Produc t Refere nce Guid e 185 Appendix H microSD C ard microSDHC C ompatibility At the time of this writing, the micro SD card interfac e for this product supports SD-M emor y Card S pecifications/ P art 1. Physical Layer Specification; V ersion 1.01, but the processor MCI can communicate with SDHC Cards.
186 Magellan TM 3200VSi microSD F unc tion Summary The following table summarizes various functions of micro SD car d. * Contact tech suppor t f or any av ailable feature upgr ade license. microSD F unc tion Details F rom Scanner to microSD C ard Capture and sa ve an image to a micr o SD card by scanning a label.
microSD Function Details Product Reference Guide 187 Expor t a C onfiguration file from the Scanner to the micro SD card By Autoru n.dl s fil e 1. Generate a text file by any text editor as follo ws and save it as autor un.dls $ST A R T$ DUMPCFG,SDCONFIG.
188 Magellan TM 3200VSi By Autoru n.dl s fil e 1. Generate a text file by any text editor as follo ws and save it as autor un.dls $ST A R T$ DUMPST A TS,dmpstats.txt $END$ 2. Save or copy the autorun.dls file to the microSD card 3. Insert the micro SD car d into the scanner 4.
microSD Function Details Product Reference Guide 189 C onfiguration load to scanner By Autoru n fil e 1. Generate a text file by any text editor as follo ws and save it as autor un.dls $ST A R T$ CONFIG,R96-cfg1.tex $END$ 2. Save or copy the autorun.dls file, and copy the CPLD code (example R96-cfg1.
190 Magellan TM 3200VSi NO TES.
ASCII Char t ASCII Char . Hex No . ASCII Char . Hex No . ASCII Char . Hex No . ASCII Char . Hex No . NUL SOH STX ETX EO T ENQ AC K BEL BS HT LF VT FF CR SO SI DLE DC1 DC2 DC3 DC4 NAK SYN ETB CAN EM SU.
Au st ral ia Datalogic Scanning Pt y Ltd T elephone: [61] (2) 9870 3200 australia.scanning@datalogic.com Fra n ce a n d B e n e l ux Datalogic Scanning SAS T elephone: [33].01.64.86.71.00 france.scanning@datalogic .com German y Datalogic Scanning GmbH T elephone: 49 (0) 61 51/93 58-0 germany .
Een belangrijk punt na aankoop van elk apparaat Datalogic MAGELLAN 3200VSI (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Datalogic MAGELLAN 3200VSI heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Datalogic MAGELLAN 3200VSI vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Datalogic MAGELLAN 3200VSI leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Datalogic MAGELLAN 3200VSI krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Datalogic MAGELLAN 3200VSI bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Datalogic MAGELLAN 3200VSI kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Datalogic MAGELLAN 3200VSI . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
