Gebruiksaanwijzing /service van het product D8530 van de fabrikant Datalogic Scanning
Ga naar pagina of 160
PowerScan ® D8530 Reference Manual.
ii Datalogic Scanning, Inc. 959 Terry Street Eugene, Oregon 97402 USA Telephone: (541) 683- 5700 Fax: (541) 345-7140 An Unpublished Work - All rights reserved.
iii CONTENTS GENERAL VIEW .......................................................................................... v COMPLIANCE .............................................................................................. v FCC Comp liance.........
iv 3.2 Wedge Interface Select ion .......................................................................... 13 3.3 USB Interface Select ion .............................................................................. 14 4 CONFIGURATION USIN G CODE SYMBOL S .
v GENERAL VIEW POWERSCAN® D8530 Read er COMPLIANCE POWERSCAN® D8530 Reader Product Labels LEDs Cable Connector Aiming System Imager Beam Out p ut Windo w.
vi CE COMPLIANCE WA RN IN G This is a Class A product . In a domestic environment this product may cause radio interference, in which case the user may be required to take adequate measures.
vii Aiming System The PowerScan® D8530 aiming s ystem meets the requirements for laser safet y. I D F E LA LUCE LASER È VISIBILE ALL'OCCHIO UMANO E VIENE EMESSA DALLA FINESTRA INDICATA NELLA FIGURA.
viii ITALIANO Le seguenti informazio ni vengono fornite diet ro direttive delle autor ità internazionali e si riferiscono all’uso corretto del terminale. NORMATIVE STANDARD PER LA SICUREZZA LASER Questo prodotto risulta conforme alle normat i ve vigenti sulla sicure zza laser alla data di produzione: CDRH 21 CFR 1040 e EN 60825-1.
ix NORMES DE SECURITE LASER Ce produit est conforme aux normes d e sécurité laser en vigueur à sa date de fabrication: CDRH 21 CFR 1040 et EN 60 825-1. Il n’est pas nécessaire d’ouvrir l’appareil p our l’installati on, l’utilisation ou l’entretien.
x WEEE COMPLIANCE Waste Electrical an d Electronic Equipmen t (WEEE) Statement English For informati on about the disposal of Wa ste Electric al and Electronic Equipment (WEEE), please refer to the website at www.
xi POWER SUPPLY This device is intended to be supplied by a UL Listed or CSA Certified Po wer Unit marked "Class 2" or "LPS" output rat ed 5- 30 V, minimum 0.75 A which supplies power directly to the scanner vi a the jack connector on the cable.
xii SERVICE AND SUPPORT Datalogic provides sever al services as well as technical support through it s website. Log on to www.scanning. datalogic.com an d click on the links indicated for further info.
INTRODUCTION 1 1 INTRODUCTION 1.1 POWERSCAN® D8530 FAMILY DESCRIPTION The PowerScan® D8530 Fa mily Hand-Held Read er packs a lot of performance into an attractive, rugged, hand-hel d device. It operates in c ommercial and industrial environments as well as the front office.
POWERSCAN® D8530 2 1.3 CONFIGURATION MET HODS 1.3.1 Reading Configuration Codes This manual can be used for complete setup and configuration. If you wish to change the default settings, you c an configure the PowerScan® D8530 r eader by readi ng the programming code s ymbols in this manu al.
INTRODUCTION 3 1.4 CABLE CONNECTION A. Rubber gasket B. Plastic boot C. Cable spacer D. Cover E. Strain relief.
POWERSCAN® D8530 4 Follow the given procedure for correct cable i nsertion: c Slip the cover over the cable. d Push the plastic boot into the rubb er gaske t. Take care that the tab on the plasti c boot is aligned with the notch in the rubb er gasket.
USING POWERSCAN® D8530 5 2 USING POWERSCAN® D8530 2.1 AIMING SYSTEM The PowerScan® D8530 r eader uses an int elligent aiming system similar to those on cameras.
POWERSCAN® D8530 6 The field of view indicated b y the aiming system will be smaller when the PowerScan® D8530 is closer to the code and larger when it is farther from the code. Symbologies with small er bars or eleme nts (mil size) should be r ead closer to the unit.
USING POWERSCAN® D8530 7 You can use the aiming s ystem to position the reader fro m the object (ensure th e reader is about centered ov er the target). Adjust t he d istance at which you are holding the reader (see Figure 2). If the RS-232 interface h as been selected, the image will be transferred to the hos t PC via XMODEM_1K protocol.
POWERSCAN® D8530 8 2.3.2 Advanced Configuration Parameters By default, for all Image Presets, the window has its origin coordinates equal to zero, its width equal to 1280 pixe ls and its height to 1024 pixels. Brightness Adjustment is availabl e in the range from –10 0% up to 100%, in steps of 1%.
USING POWERSCAN® D8530 9 undesired effect, the Autoscan P attern Code is plac ed in the Po werScan® D8530 reading area which prevents decoding. Us ing this co de as the background, code reading takes place normally b y presenting desired codes t o be read over the Pattern Code.
POWERSCAN® D8530 10 2.6 DEFINING DATA FORMATTING The string of a decoded code to be sent to the host may be formatted as follo ws: • defining simple data formatting (see page 42); • defining adv anced data formatting giving complete flexibilit y in changi ng the format of data (see par.
USING POWERSCAN® D8530 11 2.6.1 Concatenation It is possible to concate nate up to 4 different cod es, set their length an d enable the intercode delay bet ween them (the intercode de lay is set in the specific interfac e parameters, see page 27, 29 and 34).
POWERSCAN® D8530 12 3 INITIAL SETUP This procedure allows setting up the reader to operate with the default settings. Whenever you nee d to change the default values refer to par. 4.2. 3.1 RS-232 INTERFACE SELECTION The PowerScan® D8530 rea der requires the RS-232 i nterface cable and the AC/DC power adapter to be connected.
INITIAL SETUP 13 3.2 WEDGE INTERFACE SELECTION The PowerScan® D8530 rea der requires the Wedg e interface cable and the AC/DC power adapter to be connected. To install and configur e your reader wi th the Wedge interface, follo w these instructions: Make all the PowerScan® D8530 read er connections as shown in Figure 4: 1.
POWERSCAN® D8530 14 Make all PC system connections as shown in Figure 5: 4. Figure 5 – PC Wedge Connec tion 5. Power up your PC. CA UTI ON When not using the Pow erScan® D8530 reader remember t o disconnect the Wedge interfa ce from the PC before disconnecting the power cord.
INITIAL SETUP 15 Figure 6 – Reader USB Conne ctions Read the restore default param eter code below: 2. Restore Default AMHKGPAOFNGNENEI EPANHOGOCK AHHPMBAMDKEOFMHM LJALECHGIK AKCBPJCJGIIJCMCF GPLCMM.
POWERSCAN® D8530 16 Install the USB driver on your PC (the first time only) to complete the connection. 5. • For USB Bulk the relevant files and driv ers must be installed from the CD-ROM. See the “DLBulkUSB User Guide” file pr ovided on the CD- ROM for more information.
CONFIGURATION USING CODE S YMBOLS 17 4 CONFIGURATION USING CODE SYMBOLS This section describes the programmin g me thod of using config uration code symbols to program your re ader. By using th e PowerScan® D85 30 reader to re ad/decode these special configuratio n sy mbols, you ca n configure, and obta in information from its system software.
POWERSCAN® D8530 18 4.1 DEFAULT SETTINGS Configuration Field Default Setting RS-232 Communication Baud Rate 115200 Parity, Data Bits, Stop Bits No parity; 8 Data bits; 1 Stop bit Handshake None ACK/N.
CONFIGURATION USING CODE S YMBOLS 19 Configuration Field Default Setting Data Format-Symbology Dependent Parameters Symbology Specific Format Select All Header Symbology No headers Terminator Symbolog.
POWERSCAN® D8530 20 Configuration Field Default Setting Code 32 Selection Disabled Interleaved 2 of 5 Selection Enabled - check digit control and tx Code Length Check Disabled Minimum Length 014 Maxi.
CONFIGURATION USING CODE S YMBOLS 21 Data Matrix Selection Enabled - normal & inverted Rectangular Style Enabled Minimum Code Length 0001 Maximum Code Length 3600 QR Selection Enabled Postal Codes.
POWERSCAN® D8530 22 Reading Parameters (continued) Order by Code Length Disabled Order by Code Symbology Disabled Autoscan Mode Disabled Autoscan Aiming System Enabled Autoscan Hardware Trigger Enabl.
CONFIGURATION USING CODE S YMBOLS 23 4.2 CHANGING DEFAULT SETTINGS Once the reader is setup, you can chang e the default paramet ers to meet your application nee ds. Refer to the preceding par agraphs for ini tial configuration in order to set the default values and select the interface for your a pplication.
Enter Reader Configuration Exit and Save Reader Configuration AMHKGMHOFNGNENEI EPANHOGOCK AHPNIBAMDKEOFMHM LJALFCAFIK AKCBPJCJGIIJCMCE GOODCCEDJK AEFBJLBGMHPLNPGL ABJHFIAEGK AAPHBAJICCBGBIAF NLNLLAIND.
Enter Reader Configuration Exit and Save Reader Configuration AMHKGMHOFNGNENEI EPANHOGOCK AHPNIBAMDKEOFMHM LJALFCAFIK AKCBPJCJGIIJCMCE GOODCCEDJK AEFBJLBGMHPLNPGL ABJHFIAEGK AAPHBAJICCBGBIAF NLNLLAIND.
Enter Reader Configuration Exit and Save Reader Configuration AMHKGMHOFNGNENEI EPANHOGOCK AHPNIBAMDKEOFMHM LJALFCAFIK AKCBPJCJGIIJCMCE GOODCCEDJK AEFBJLBGMHPLNPGL ABJHFIAEGK AAPHBAJICCBGBIAF NLNLLAIND.
Enter Reader Configuration Exit and Save Reader Configuration AMHKGMHOFNGNENEI EPANHOGOCK AHPNIBAMDKEOFMHM LJALFCAFIK AKCBPJCJGIIJCMCE GOODCCEDJK AEFBJLBGMHPLNPGL ABJHFIAEGK AAPHBAJICCBGBIAF NLNLLAIND.
Enter Reader Configuration Exit and Save Reader Configuration AMHKGMHOFNGNENEI EPANHOGOCK AHPNIBAMDKEOFMHM LJALFCAFIK AKCBPJCJGIIJCMCE GOODCCEDJK AEFBJLBGMHPLNPGL ABJHFIAEGK AAPHBAJICCBGBIAF NLNLLAIND.
Enter Reader Configuration Exit and Save Reader Configuration AMHKGMHOFNGNENEI EPANHOGOCK AHPNIBAMDKEOFMHM LJALFCAFIK AKCBPJCJGIIJCMCE GOODCCEDJK AEFBJLBGMHPLNPGL ABJHFIAEGK AAPHBAJICCBGBIAF NLNLLAIND.
Enter Reader Configuration Exit and Save Reader Configuration AMHKGMHOFNGNENEI EPANHOGOCK AHPNIBAMDKEOFMHM LJALFCAFIK AKCBPJCJGIIJCMCE GOODCCEDJK AEFBJLBGMHPLNPGL ABJHFIAEGK AAPHBAJICCBGBIAF NLNLLAIND.
Enter Reader Configuration Exit and Save Reader Configuration AMHKGMHOFNGNENEI EPANHOGOCK AHPNIBAMDKEOFMHM LJALFCAFIK AKCBPJCJGIIJCMCE GOODCCEDJK AEFBJLBGMHPLNPGL ABJHFIAEGK AAPHBAJICCBGBIAF NLNLLAIND.
Enter Reader Configuration Exit and Save Reader Configuration AMHKGMHOFNGNENEI EPANHOGOCK AHPNIBAMDKEOFMHM LJALFCAFIK AKCBPJCJGIIJCMCE GOODCCEDJK AEFBJLBGMHPLNPGL ABJHFIAEGK AAPHBAJICCBGBIAF NLNLLAIND.
Enter Reader Configuration Exit and Save Reader Configuration AMHKGMHOFNGNENEI EPANHOGOCK AHPNIBAMDKEOFMHM LJALFCAFIK AKCBPJCJGIIJCMCE GOODCCEDJK AEFBJLBGMHPLNPGL ABJHFIAEGK AAPHBAJICCBGBIAF NLNLLAIND.
Enter Reader Configuration Exit and Save Reader Configuration AMHKGMHOFNGNENEI EPANHOGOCK AHPNIBAMDKEOFMHM LJALFCAFIK AKCBPJCJGIIJCMCE GOODCCEDJK AEFBJLBGMHPLNPGL ABJHFIAEGK AAPHBAJICCBGBIAF NLNLLAIND.
Enter Reader Configuration Exit and Save Reader Configuration AMHKGMHOFNGNENEI EPANHOGOCK AHPNIBAMDKEOFMHM LJALFCAFIK AKCBPJCJGIIJCMCE GOODCCEDJK AEFBJLBGMHPLNPGL ABJHFIAEGK AAPHBAJICCBGBIAF NLNLLAIND.
WEDGE 36 Some ASCII characters may be missing as this depends on the t ype of keyboard: these are generall y particular characters relative to the various national s ymbologies. In this case: • The first 4 characters (Sh ift, Alt, Ctrl, and Backspace) can o nly be substituted with keys not used, o r substituted with each o ther.
WEDGE 37 Acoustic Signa ls Four types of acoustic signals are associate d with the following steps: 1. Enter keyboard setup 2. Exit keyboard setup 3. SHIFT, ALT, CTRL, BACKSPACE keys 4.
WEDGE 38 E XTENDED H EA DE R /T ERMINATOR K EYS For the WEDGE interface, the following extend ed keyboard values c an also be configured. These values are restored t hrough the In terface Selection code and not Restor e Default.
Enter Reader Configuration Exit and Save Reader Configuration AMHKGMHOFNGNENEI EPANHOGOCK AHPNIBAMDKEOFMHM LJALFCAFIK AKCBPJCJGIIJCMCE GOODCCEDJK AEFBJLBGMHPLNPGL ABJHFIAEGK AAPHBAJICCBGBIAF NLNLLAIND.
WEDGE 40 If the first 4 KEYS (Shift, Alt, Ctrl, a nd Backspace) are not available on your keyboard, you can o nly substitute them w i th keys not used, or substitute them with each o ther. The reader sign als the end of the procedure w ith 3 beeps indicating the keys have been registered.
WEDGE 41 Acoustic Signa ls Four types of acoustic signals are associate d with the following steps: 1. Enter keyboard setup 2. Exit keyboard setup 3. SHIFT, ALT, CTRL, BACKSPACE keys 4.
Enter Reader Configuration Exit and Save Reader Configuration AMHKGMHOFNGNENEI EPANHOGOCK AHPNIBAMDKEOFMHM LJALFCAFIK AKCBPJCJGIIJCMCE GOODCCEDJK AEFBJLBGMHPLNPGL ABJHFIAEGK AAPHBAJICCBGBIAF NLNLLAIND.
Enter Reader Configuration Exit and Save Reader Configuration AMHKGMHOFNGNENEI EPANHOGOCK AHPNIBAMDKEOFMHM LJALFCAFIK AKCBPJCJGIIJCMCE GOODCCEDJK AEFBJLBGMHPLNPGL ABJHFIAEGK AAPHBAJICCBGBIAF NLNLLAIND.
Enter Reader Configuration Exit and Save Reader Configuration AMHKGMHOFNGNENEI EPANHOGOCK AHPNIBAMDKEOFMHM LJALFCAFIK AKCBPJCJGIIJCMCE GOODCCEDJK AEFBJLBGMHPLNPGL ABJHFIAEGK AAPHBAJICCBGBIAF NLNLLAIND.
Enter Reader Configuration Exit and Save Reader Configuration AMHKGMHOFNGNENEI EPANHOGOCK AHPNIBAMDKEOFMHM LJALFCAFIK AKCBPJCJGIIJCMCE GOODCCEDJK AEFBJLBGMHPLNPGL ABJHFIAEGK AAPHBAJICCBGBIAF NLNLLAIND.
Enter Reader Configuration Exit and Save Reader Configuration AMHKGMHOFNGNENEI EPANHOGOCK AHPNIBAMDKEOFMHM LJALFCAFIK AKCBPJCJGIIJCMCE GOODCCEDJK AEFBJLBGMHPLNPGL ABJHFIAEGK AAPHBAJICCBGBIAF NLNLLAIND.
Enter Reader Configuration Exit and Save Reader Configuration AMHKGMHOFNGNENEI EPANHOGOCK AHPNIBAMDKEOFMHM LJALFCAFIK AKCBPJCJGIIJCMCE GOODCCEDJK AEFBJLBGMHPLNPGL ABJHFIAEGK AAPHBAJICCBGBIAF NLNLLAIND.
Enter Reader Configuration Exit and Save Reader Configuration AMHKGMHOFNGNENEI EPANHOGOCK AHPNIBAMDKEOFMHM LJALFCAFIK AKCBPJCJGIIJCMCE GOODCCEDJK AEFBJLBGMHPLNPGL ABJHFIAEGK AAPHBAJICCBGBIAF NLNLLAIND.
Enter Reader Configuration Exit and Save Reader Configuration AMHKGMHOFNGNENEI EPANHOGOCK AHPNIBAMDKEOFMHM LJALFCAFIK AKCBPJCJGIIJCMCE GOODCCEDJK AEFBJLBGMHPLNPGL ABJHFIAEGK AAPHBAJICCBGBIAF NLNLLAIND.
Enter Reader Configuration Exit and Save Reader Configuration AMHKGMHOFNGNENEI EPANHOGOCK AHPNIBAMDKEOFMHM LJALFCAFIK AKCBPJCJGIIJCMCE GOODCCEDJK AEFBJLBGMHPLNPGL ABJHFIAEGK AAPHBAJICCBGBIAF NLNLLAIND.
Enter Reader Configuration Exit and Save Reader Configuration AMHKGMHOFNGNENEI EPANHOGOCK AHPNIBAMDKEOFMHM LJALFCAFIK AKCBPJCJGIIJCMCE GOODCCEDJK AEFBJLBGMHPLNPGL ABJHFIAEGK AAPHBAJICCBGBIAF NLNLLAIND.
Enter Reader Configuration Exit and Save Reader Configuration AMHKGMHOFNGNENEI EPANHOGOCK AHPNIBAMDKEOFMHM LJALFCAFIK AKCBPJCJGIIJCMCE GOODCCEDJK AEFBJLBGMHPLNPGL ABJHFIAEGK AAPHBAJICCBGBIAF NLNLLAIND.
Enter Reader Configuration Exit and Save Reader Configuration AMHKGMHOFNGNENEI EPANHOGOCK AHPNIBAMDKEOFMHM LJALFCAFIK AKCBPJCJGIIJCMCE GOODCCEDJK AEFBJLBGMHPLNPGL ABJHFIAEGK AAPHBAJICCBGBIAF NLNLLAIND.
Enter Reader Configuration Exit and Save Reader Configuration AMHKGMHOFNGNENEI EPANHOGOCK AHPNIBAMDKEOFMHM LJALFCAFIK AKCBPJCJGIIJCMCE GOODCCEDJK AEFBJLBGMHPLNPGL ABJHFIAEGK AAPHBAJICCBGBIAF NLNLLAIND.
Enter Reader Configuration Exit and Save Reader Configuration AMHKGMHOFNGNENEI EPANHOGOCK AHPNIBAMDKEOFMHM LJALFCAFIK AKCBPJCJGIIJCMCE GOODCCEDJK AEFBJLBGMHPLNPGL ABJHFIAEGK AAPHBAJICCBGBIAF NLNLLAIND.
Enter Reader Configuration Exit and Save Reader Configuration AMHKGMHOFNGNENEI EPANHOGOCK AHPNIBAMDKEOFMHM LJALFCAFIK AKCBPJCJGIIJCMCE GOODCCEDJK AEFBJLBGMHPLNPGL ABJHFIAEGK AAPHBAJICCBGBIAF NLNLLAIND.
Enter Reader Configuration Exit and Save Reader Configuration AMHKGMHOFNGNENEI EPANHOGOCK AHPNIBAMDKEOFMHM LJALFCAFIK AKCBPJCJGIIJCMCE GOODCCEDJK AEFBJLBGMHPLNPGL ABJHFIAEGK AAPHBAJICCBGBIAF NLNLLAIND.
Enter Reader Configuration Exit and Save Reader Configuration AMHKGMHOFNGNENEI EPANHOGOCK AHPNIBAMDKEOFMHM LJALFCAFIK AKCBPJCJGIIJCMCE GOODCCEDJK AEFBJLBGMHPLNPGL ABJHFIAEGK AAPHBAJICCBGBIAF NLNLLAIND.
Enter Reader Configuration Exit and Save Reader Configuration AMHKGMHOFNGNENEI EPANHOGOCK AHPNIBAMDKEOFMHM LJALFCAFIK AKCBPJCJGIIJCMCE GOODCCEDJK AEFBJLBGMHPLNPGL ABJHFIAEGK AAPHBAJICCBGBIAF NLNLLAIND.
Enter Reader Configuration Exit and Save Reader Configuration AMHKGMHOFNGNENEI EPANHOGOCK AHPNIBAMDKEOFMHM LJALFCAFIK AKCBPJCJGIIJCMCE GOODCCEDJK AEFBJLBGMHPLNPGL ABJHFIAEGK AAPHBAJICCBGBIAF NLNLLAIND.
Enter Reader Configuration Exit and Save Reader Configuration AMHKGMHOFNGNENEI EPANHOGOCK AHPNIBAMDKEOFMHM LJALFCAFIK AKCBPJCJGIIJCMCE GOODCCEDJK AEFBJLBGMHPLNPGL ABJHFIAEGK AAPHBAJICCBGBIAF NLNLLAIND.
Enter Reader Configuration Exit and Save Reader Configuration AMHKGMHOFNGNENEI EPANHOGOCK AHPNIBAMDKEOFMHM LJALFCAFIK AKCBPJCJGIIJCMCE GOODCCEDJK AEFBJLBGMHPLNPGL ABJHFIAEGK AAPHBAJICCBGBIAF NLNLLAIND.
Enter Reader Configuration Exit and Save Reader Configuration AMHKGMHOFNGNENEI EPANHOGOCK AHPNIBAMDKEOFMHM LJALFCAFIK AKCBPJCJGIIJCMCE GOODCCEDJK AEFBJLBGMHPLNPGL ABJHFIAEGK AAPHBAJICCBGBIAF NLNLLAIND.
Enter Reader Configuration Exit and Save Reader Configuration AMHKGMHOFNGNENEI EPANHOGOCK AHPNIBAMDKEOFMHM LJALFCAFIK AKCBPJCJGIIJCMCE GOODCCEDJK AEFBJLBGMHPLNPGL ABJHFIAEGK AAPHBAJICCBGBIAF NLNLLAIND.
Enter Reader Configuration Exit and Save Reader Configuration AMHKGMHOFNGNENEI EPANHOGOCK AHPNIBAMDKEOFMHM LJALFCAFIK AKCBPJCJGIIJCMCE GOODCCEDJK AEFBJLBGMHPLNPGL ABJHFIAEGK AAPHBAJICCBGBIAF NLNLLAIND.
Enter Reader Configuration Exit and Save Reader Configuration AMHKGMHOFNGNENEI EPANHOGOCK AHPNIBAMDKEOFMHM LJALFCAFIK AKCBPJCJGIIJCMCE GOODCCEDJK AEFBJLBGMHPLNPGL ABJHFIAEGK AAPHBAJICCBGBIAF NLNLLAIND.
Enter Reader Configuration Exit and Save Reader Configuration AMHKGMHOFNGNENEI EPANHOGOCK AHPNIBAMDKEOFMHM LJALFCAFIK AKCBPJCJGIIJCMCE GOODCCEDJK AEFBJLBGMHPLNPGL ABJHFIAEGK AAPHBAJICCBGBIAF NLNLLAIND.
Enter Reader Configuration Exit and Save Reader Configuration AMHKGMHOFNGNENEI EPANHOGOCK AHPNIBAMDKEOFMHM LJALFCAFIK AKCBPJCJGIIJCMCE GOODCCEDJK AEFBJLBGMHPLNPGL ABJHFIAEGK AAPHBAJICCBGBIAF NLNLLAIND.
Enter Reader Configuration Exit and Save Reader Configuration AMHKGMHOFNGNENEI EPANHOGOCK AHPNIBAMDKEOFMHM LJALFCAFIK AKCBPJCJGIIJCMCE GOODCCEDJK AEFBJLBGMHPLNPGL ABJHFIAEGK AAPHBAJICCBGBIAF NLNLLAIND.
Enter Reader Configuration Exit and Save Reader Configuration AMHKGMHOFNGNENEI EPANHOGOCK AHPNIBAMDKEOFMHM LJALFCAFIK AKCBPJCJGIIJCMCE GOODCCEDJK AEFBJLBGMHPLNPGL ABJHFIAEGK AAPHBAJICCBGBIAF NLNLLAIND.
Enter Reader Configuration Exit and Save Reader Configuration AMHKGMHOFNGNENEI EPANHOGOCK AHPNIBAMDKEOFMHM LJALFCAFIK AKCBPJCJGIIJCMCE GOODCCEDJK AEFBJLBGMHPLNPGL ABJHFIAEGK AAPHBAJICCBGBIAF NLNLLAIND.
Enter Reader Configuration Exit and Save Reader Configuration AMHKGMHOFNGNENEI EPANHOGOCK AHPNIBAMDKEOFMHM LJALFCAFIK AKCBPJCJGIIJCMCE GOODCCEDJK AEFBJLBGMHPLNPGL ABJHFIAEGK AAPHBAJICCBGBIAF NLNLLAIND.
Enter Reader Configuration Exit and Save Reader Configuration AMHKGMHOFNGNENEI EPANHOGOCK AHPNIBAMDKEOFMHM LJALFCAFIK AKCBPJCJGIIJCMCE GOODCCEDJK AEFBJLBGMHPLNPGL ABJHFIAEGK AAPHBAJICCBGBIAF NLNLLAIND.
Enter Reader Configuration Exit and Save Reader Configuration AMHKGMHOFNGNENEI EPANHOGOCK AHPNIBAMDKEOFMHM LJALFCAFIK AKCBPJCJGIIJCMCE GOODCCEDJK AEFBJLBGMHPLNPGL ABJHFIAEGK AAPHBAJICCBGBIAF NLNLLAIND.
Enter Cradle Configuration Exit and Save Cradle Configuration AOAIGMHOFNGNENEI EPANHOGOCK AHPNIBAMDKEOFMHM LJALFAGHIK AKCBPJCJGIIJCMCE GMNGOBKBJK AEFBJLBGMHPLMPEE EJKEBPIHGK AAPHBAJJCHEGKKEL MEFNPDJFF.
Enter Reader Configuration Exit and Save Reader Configuration AMHKGMHOFNGNENEI EPANHOGOCK AHPNIBAMDKEOFMHM LJALFCAFIK AKCBPJCJGIIJCMCE GOODCCEDJK AEFBJLBGMHPLNPGL ABJHFIAEGK AAPHBAJICCBGBIAF NLNLLAIND.
Enter Reader Configuration Exit and Save Reader Configuration AMHKGMHOFNGNENEI EPANHOGOCK AHPNIBAMDKEOFMHM LJALFCAFIK AKCBPJCJGIIJCMCE GOODCCEDJK AEFBJLBGMHPLNPGL ABJHFIAEGK AAPHBAJICCBGBIAF NLNLLAIND.
Enter Reader Configuration Exit and Save Reader Configuration AMHKGMHOFNGNENEI EPANHOGOCK AHPNIBAMDKEOFMHM LJALFCAFIK AKCBPJCJGIIJCMCE GOODCCEDJK AEFBJLBGMHPLNPGL ABJHFIAEGK AAPHBAJICCBGBIAF NLNLLAIND.
Enter Reader Configuration Exit and Save Reader Configuration AMHKGMHOFNGNENEI EPANHOGOCK AHPNIBAMDKEOFMHM LJALFCAFIK AKCBPJCJGIIJCMCE GOODCCEDJK AEFBJLBGMHPLNPGL ABJHFIAEGK AAPHBAJICCBGBIAF NLNLLAIND.
Enter Reader Configuration Exit and Save Reader Configuration AMHKGMHOFNGNENEI EPANHOGOCK AHPNIBAMDKEOFMHM LJALFCAFIK AKCBPJCJGIIJCMCE GOODCCEDJK AEFBJLBGMHPLNPGL ABJHFIAEGK AAPHBAJICCBGBIAF NLNLLAIND.
Enter Reader Configuration Exit and Save Reader Configuration AMHKGMHOFNGNENEI EPANHOGOCK AHPNIBAMDKEOFMHM LJALFCAFIK AKCBPJCJGIIJCMCE GOODCCEDJK AEFBJLBGMHPLNPGL ABJHFIAEGK AAPHBAJICCBGBIAF NLNLLAIND.
Enter Reader Configuration Exit and Save Reader Configuration AMHKGMHOFNGNENEI EPANHOGOCK AHPNIBAMDKEOFMHM LJALFCAFIK AKCBPJCJGIIJCMCE GOODCCEDJK AEFBJLBGMHPLNPGL ABJHFIAEGK AAPHBAJICCBGBIAF NLNLLAIND.
Enter Reader Configuration Exit and Save Reader Configuration AMHKGMHOFNGNENEI EPANHOGOCK AHPNIBAMDKEOFMHM LJALFCAFIK AKCBPJCJGIIJCMCE GOODCCEDJK AEFBJLBGMHPLNPGL ABJHFIAEGK AAPHBAJICCBGBIAF NLNLLAIND.
Enter Reader Configuration Exit and Save Reader Configuration AMHKGMHOFNGNENEI EPANHOGOCK AHPNIBAMDKEOFMHM LJALFCAFIK AKCBPJCJGIIJCMCE GOODCCEDJK AEFBJLBGMHPLNPGL ABJHFIAEGK AAPHBAJICCBGBIAF NLNLLAIND.
Enter Reader Configuration Exit and Save Reader Configuration AMHKGMHOFNGNENEI EPANHOGOCK AHPNIBAMDKEOFMHM LJALFCAFIK AKCBPJCJGIIJCMCE GOODCCEDJK AEFBJLBGMHPLNPGL ABJHFIAEGK AAPHBAJICCBGBIAF NLNLLAIND.
Enter Reader Configuration Exit and Save Reader Configuration AMHKGMHOFNGNENEI EPANHOGOCK AHPNIBAMDKEOFMHM LJALFCAFIK AKCBPJCJGIIJCMCE GOODCCEDJK AEFBJLBGMHPLNPGL ABJHFIAEGK AAPHBAJICCBGBIAF NLNLLAIND.
Enter Reader Configuration Exit and Save Reader Configuration AMHKGMHOFNGNENEI EPANHOGOCK AHPNIBAMDKEOFMHM LJALFCAFIK AKCBPJCJGIIJCMCE GOODCCEDJK AEFBJLBGMHPLNPGL ABJHFIAEGK AAPHBAJICCBGBIAF NLNLLAIND.
POWERSCAN® D8530 88 4.3 ADVANCED DATA F ORMAT Advanced data format has be en designed t o offer you complete flexibility in ch anging the format of barcode data before transmitting it to the host system.
CONFIGURATION USING CODE S YMBOLS 89 4.3.1 Format Definition STEP 1 FORMAT DEFINITION Define Format 1 Define Format 2 AOCLGKHMFNGNENEI EPANHOGOCK AHHPMBIMDKEOFMHM LJAKEAFGIK AKCBPJCJGIIJCMCF GLIBLHNBJ.
POWERSCAN® D8530 90 STEP 2 FORMAT DEFINITION Method 1 - Extracting Information from Barcode Method 1 allows extracting one or more fields by positi on or by characters from the decoded barcode.
CONFIGURATION USING CODE S YMBOLS 91 Example Method 1 Extrac ting Information from Barcode Decoded code : <DA T ALOGICproduct> Formatting procedure : Add new string + Extract field by position +.
POWERSCAN® D8530 92 FIELD EXTRACTION BY CHARA CTER a) Define Field Starting Character(s) Field Starting Character(s) AOCKHMFKFNGNENEI EPANHOGOCK AHJLJFGOPKEOFMHM LJALEDGHKK AOJDPBCJGIIJCMCE GNOJDNBPE.
CONFIGURATION USING CODE S YMBOLS 93 FIELD EXTRACTION BY POSITION a) Define Field Starting Position Field Starting Position AOBLHMFKFNGNENEI EPANHOGOCK AHJLJDHODKEOFMHM LJAKFAAEKK AOJDPBCJGIIJCMCF HLL.
POWERSCAN® D8530 94 ADD NEW STRING a) Define New String String Character(s) ANGOGIFKDNGNENEI EPANHOGOCK AHPNIBAMDKEOFMHM LJAKFCDGIK AKCBPJCJGIIJCMCE HJLONAJLLK AEFBJLBGMHPLMJGB FHKLALDGGK AAPHBAJJDECHGDKM OEDDMEBJBK AHLEBNKAODJIMPLG JNNKMCKJIK DDDLLLDDDLDLLLLD LDDDDLDLDL Read the Hex value from the Hex/Numeric table identifying the character(s).
CONFIGURATION USING CODE S YMBOLS 95 Method 2 - Manipulating the Barcode Data Method 2 allows mod ifying the barcode data by means of o ne of the follo wing procedures: − String insertion; − String deletion; − String substitution; − Field deletion.
POWERSCAN® D8530 96 STRING INSERTION To complete this procedure proceed as foll ows: Def ine Format 1, 2, 3, 4, or 5 End Fo rm at D efinition Add St ri ng? Insert Str i ng Add St ri ng? Ad d new Str .
CONFIGURATION USING CODE S YMBOLS 97 String Insertion Procedure a) Insert String Insert String APCJHMFKFNGNENEI EPANHOGOCK AHJLJFGOPKEOFMHM LJAKFBEFKK AOJDPBCJGIIJCMCF GNNKPHPHEK AIFBJLBGMHPKMNFK ECEK.
POWERSCAN® D8530 98 STRING DELETION To complete this procedure proceed as foll ows: Def ine For m at 1, 2, 3, 4, or 5 End For m at Defini tion Add Str ing? Dele te St ri ng Add Str ing? Ad d new Str .
CONFIGURATION USING CODE S YMBOLS 99 String Deletion Procedure a) Delete String Delete AMHLGLEKHNGNENEI EPANHOGOCK AHLNEBIMDKEOFMHM LJAKEDDEJK AKCBPJCJGIIJCMCE HKMCKLPJPK AEFBJLBGMHPLMMEI LNAAMKFHGK A.
POWERSCAN® D8530 100 STRING SUBSTITUTION To complete this procedure proceed as foll ows: Def ine For m at 1, 2, 3, 4, or 5 End Fo rm at De finition Add St ri ng? S u b s titu te Str i ng Add St ri ng.
CONFIGURATION USING CODE S YMBOLS 101 String Substitution Procedure a) Define String to be Substituted Substitute String APAKHMFKFNGNENEI EPANHOGOCK AHJLJFGOPKEOFMHM LJAKEDHGKK AOJDPBCJGIIJCMCE GOLKBI.
POWERSCAN® D8530 102 FIELD DELETION To complete this procedure proceed as foll ows: Def ine For m at 1, 2, 3, 4, or 5 End Format Defi niti on Add String? Del et e Fi eld Add String? Ad d new St ri ng.
CONFIGURATION USING CODE S YMBOLS 103 Field Deletion Procedure a) Delete Field Delete AMHLGLEKHNGNENEI EPANHOGOCK AHHPEBIMDKEOFMHM LJALEAHEIK AKCBPJCJGIIJCMCE HILFPJABJK AEFBJLBGMHPKNIFA MGIDOBPFGK AAPHBAJIDBDPFCPC BLBBIHELFK AGLFAMKAJEOIKHFK IGKEMGNILK DDLLLLLDLLLLLLLD DLDDDLDLLL Read the code to enable the command deleting the field.
POWERSCAN® D8530 104 f ) E I T H E R Add String Add AMHNGIFKDNGNENEI EPANHOGOCK AHPNIBAMDKEOFMHM LJALFCGEIK AKCBPJCJGIIJCMCE HKODEMDDPK AEFBJLBGMHPKMOBC LFFFACLGGK AAPHBAJIDBGAJHMK PCBLOPFBFK AHKEBMP.
CONFIGURATION USING CODE S YMBOLS 105 ADD NEW STRING a) Define New String String Character ANGOGIFKDNGNENEI EPANHOGOCK AHPNIBAMDKEOFMHM LJAKFCDGIK AKCBPJCJGIIJCMCE HJLONAJLLK AEFBJLBGMHPLMJGB FHKLALDG.
POWERSCAN® D8530 106 4.3.2 Match Conditions By setting one or more of the following conditions it is possible to select the codes to be formatted. Follow the given steps to define the desired condition.
CONFIGURATION USING CODE S YMBOLS 107 AND/OR MATCH SYMBOLOGY Define Code Symbology Match Symbology AOCLFLFMFNGNENEI EPANHOGOCK AHPNIJAMDKEOFMHM LJAKEGBHIK AKCBPJCJGIIJCMCF GMKNOLCFJK AEFBJLBGMHPLMLHP OCDCLFDGGK AAPHBAJJCECGCJGB DFGBNLINBK AHKFAILPHFEMACFD FLIEKIPKLK DDDLLDLDDLDLLLLD DDLDDLDLLL Read the above code and: 1.
POWERSCAN® D8530 108 4.3.3 Format Enable/Disable Format 1 Format 2 AOCLGKHMHNGNENEI EPANHOGOCK AHHPMBIMDKEOFMHM LJAKFFFGIK AKCBPJCJGIIJCMCE HIMHGIADNK AEFBJLBGMHPLNMAN FIHIMLGEGK AAPHBAJJDEENFCPP LHP.
CONFIGURATION USING CODE S YMBOLS 109 4.3.4 Mismatch Result The result of each format may be set in case the match con ditions previousl y selected are not satisfied. Once the desired formats hav e been enable d and a code has b een read, the results corresponding to each format will be conc atenated togethe r and transmitted in the output message.
POWERSCAN® D8530 110 5 REFERENCES 5.1 RS-232 – USB COM 5.1.1 ACK/NACK Protocol The transmission protoco l takes place betwee n reader and Host. Once the reader has read a code, it emits a good read beep and passes its d ata to the Host. When ACK/NACK is disabled, there is no co ntrol from reader to Host transmission.
REFERENCES 111 5.2 USB KEYBOARD 5.2.1 Keyboard Speed This parameter manages the transmission spee d of characters to the Host. A fast Keyboard Speed al lows rapid transmission of a great amount of characters (for example 2D codes), but it might not be compatible with slower systems.
POWERSCAN® D8530 112 5.5 CONFIGURATION EDI TING COMMANDS The follow ing commands carry out their spe cific functi on and do not requ ire reading the Enter or Exit and Save Configuration cod es.
TEST CODE SYMBOLS 113 6 TEST CODE SYMBOLS Use these 1D and 2D test s ymbols to check that the read er is imaging and decoding properly, according to your configur ation.
POWERSCAN® D8530 114 QR PDF417 DataMatrix (Normal) DataMatrix (Inverse).
MAINTENANCE 115 7 MAINTENANCE You do not need to perform regular preventative mainte nance on the PowerScan® D8530 reader. Do not try to open th e case, because you mig ht damage the interior electron ic components and suc h action v oids the warranty.
POWERSCAN® D8530 116 8 TECHNICAL FEATURES PowerScan® D8530 Famil y Common Features Electrical Features Operating Voltage 5 to 30 V Power Consumption @ 5V (Typical) 600 mA @30V (Typical) 100 mA Commu.
TECHNICAL FEATURES 117 PowerScan® D85 30™ Optical Features Focus distance 140 mm Field of view 28° (H) x 23° (V) Horizontal field of view at distance ( d ) in mm 0.52 d + 15 Vertical field of view at distance ( d ) in mm 0.42 d + 12 Max Resolution Linear codes - mm (mils) PDF 417 – mm (mils) Datamatrix – mm (mils) 0.
POWERSCAN® D8530 118 PowerScan® D85 30™ HD Optical Features Focus distance 65 mm Field of view 27° (H) x 22° (V) Horizontal field of view at distance ( d ) in mm 0.50 d + 13 Vertical field of view at distance ( d ) in mm 0.40 d + 10 Max Resolution Linear co des - mm (mils) PDF 417 – mm (mils) Datamatrix – mm (mils) 0.
TECHNICAL FEATURES 119 PowerScan® D85 30™ WA Optical Features Focus distance 115 mm Field of view 54° (H) x 45° (V) Horizontal field of view at distance ( d ) in mm 1.04 d + 40 Vertical field of view at distance ( d ) in mm 0.40 d + 10 Max Resolution Linear co des - mm (mils) PDF 417 – mm (mils) Datamatrix – mm (mils) 0.
POWERSCAN® D8530 120 8.1 INDICATORS 8.1.1 PowerScan® D8530 LED Indicators The PowerScan® D8530 famil y uses green LED indicators to signal the following reader functions: STATUS BEHAVIOR Power ON At power-on, the LEDs blink briefly, then light up for 2 seconds to signal the power supply is present.
HOST CONFIGURATION STRINGS 121 A HOST CONFIGURATION STRINGS In this section we provide a descri ption of how to modif y the device configuratio n using serial strings sent from the Host. This method requi res the RS-232, USB- Com, USB Bulk or USB Generic HID interface.
POWERSCAN® D8530 122 SERIAL CONFIGURATION STRINGS ENTER/EXIT CONFIGURATION COMMANDS DESCRIPTION STRING Enter Configuration $+ Exit and Save Configuration $- Restore Default $+$* Transmit Software Rel.
HOST CONFIGURATION STRINGS 123 RS-232 (continued) DESCRIPTION STRING FIFO disabled DDC0 enabled DDC1 RX Timeout DEB00 - DEB99 Intercharacter Delay DEA00 - DE A99 Intercode Delay DEC00 - DEC99 Serial T.
POWERSCAN® D8530 124 DATA FORMAT (continued) DESCRIPTION STRING Set Headers nine characters ED A09 xxxxxxxxx ten characters EDA10 xxxxxxxxxx Headers disabled EDB0 enabled EDB1 Set Terminators no term.
HOST CONFIGURATION STRINGS 125 POWER SAVE DESCRIPTION STRING Illumination System Power Illumination System OFF HAA 0 Illumination System ON HA A1 CODE SELECTION DESCRIPTION STRING Disable All Symbolog.
POWERSCAN® D8530 126 CODE SELECTION DESCRIPTION STRING LINEAR SYMBOLOGIES Interleaved 2/5 disabled AC A0 enabled – no check digit control AC A1 enabled – check digit control and without transmiss.
HOST CONFIGURATION STRINGS 127 CODE SELECTION (contin ued) DESCRIPTION STRING GS1 DataBar Expanded disabled AMD 0 Stacked enabled AMD 1 GS1 DataBar Stacked disabled AM E0 enabled AM E1 d = a number fr.
POWERSCAN® D8530 128 CODE SELECTION DESCRIPTION STRING 2D SYMBOLOGIES PDF417 disabled AG A0 enabled AG A1 Macro PDF417 unbuffered mode AVB 0 buffered mode AV B1 Micro PDF417 disabled AGB0 enabled AG .
HOST CONFIGURATION STRINGS 129 CODE SELECTION (contin ued) DESCRIPTION STRING C o m p o s i te C o de disabled AN A0 enabled ANA1 Discard Linear disabled ANB0 Part enabled ANB1 e = a number from the H.
POWERSCAN® D8530 130 CODE ORDERING AND SELECTION Code per Scan one code per sca n BCB0 all codes per scan BCB1 Central Code Transmission disabled OA A0 enabled OAA 1 Order by Code Length disabled OAB.
HOST CONFIGURATION STRINGS 131 ADVA NCED IMAG E CAPTU RE DESCRIPTION STRING IMAGE PRESET 1 Advanced Configurati on Brightness increase IAO 0IAF i decrease IA O1IA F1i Contrast increase IA P0IAE i decr.
POWERSCAN® D8530 132 ADVA NCED IMAG E CAPTU RE DESCRIPTION STRING IMAGE PRESET 3 Basic Configuration Image Format JPEG format IC A1 TIFF format ICA2 Resolution full resolution (1280 x 1024) ICB0 half.
PROGRAMMING FOR EXPERT USERS 133 B PROGRAMMING FOR EXPERT USERS This document is addresse d to expert users who ar e familiar with soft ware programming langua ges and want to define a personaliz ed code formatting.
POWERSCAN® D8530 134 CONVENTIONS DESCRIPTION + Conc atenates two strings or fields. - Deletes a substring or a field from the origina l string. #DS Returns the string which has been d ecoded by the library. #F<n> Returns th e result of a format which has bee n previously defined.
PROGRAMMING FOR EXPERT USERS 135 SelectString (SSTR) This function has the following syntax: SSTR <source_string, pos_start, pos_end> Ö string It extracts a substring whose characters are between "pos _start" and "pos _end" from the "source_string".
POWERSCAN® D8530 136 StringDiscard This function has the following syntax: string1 - string2 Ö string This function discards all th e strings having the same value as "string2" which can be found in "string1". If no "string2" is found with in "string1", the result returns "string1".
PROGRAMMING FOR EXPERT USERS 137 Examples The string transmitted is S 12345abc def3790 T and correspon ds to the #DS function, as defined in the programming language.
POWERSCAN® D8530 138 C CODE IDENTIFIE R TABLE EAN/UPC CODA BA R APCPCMHOFNGNENEI EPANHOGOCK AHPNIBAMDKEOFMHM LJAKEGBHIK AKCBPJCJGIIJCMCE GOMAPFDLJK AEFBJLBGMHPLMNBJ DBAMFHOEGK AAPHBAJJCCDBJLHE JOHAEJ.
CODE IDENTIFIER TABLE 139 DA T A MATR IX MAXICODE AODKGMHOFNGNENEI EPANHOGOCK AHPNIBAMDKEOFMHM LJAKFCCHIK AKCBPJCJGIIJCMCF GJJCFJLDPK AEFBJLBGMHPLMJBF PMGFAJNHGK AAPHBAJJCBEPCBED OJMDKCEPHK AFLFAOMAAG.
POWERSCAN® D8530 140 D HEX AND NUMERIC TABLE CHARACTER TO HEX CONVERSION TABLE char decimal hex char decimal hex char decimal hex NUL 000 00 * 042 2A U 085 55 SOH 001 01 + 043 2B V 086 56 STX 002 02 , 044 2C W 087 57 ETX 003 03 - 045 2D X 088 58 EOT 004 04 .
HEX AND NUMERIC TABLE 141 0 1 ANFOGIFKDNGNENEI EPANHOGOCK AHPNIBAMDKEOFMHM LJAKFHBHIK AKCBPJCJGIIJCMCF GPOFMJLDJK AEFBJLBGMHPKNIFG JCGBBDNHGK AAPHBAJJDEBJCDJA GBDLGHNFHK AFKEBJJPCPKMAJNA MBKKKCFJKK DL.
POWERSCAN® D8530 142 5 6 AMEPGIFKDNGNENEI EPANHOGOCK AHPNIBAMDKEOFMHM LJAKFAAEIK AKCBPJCJGIIJCMCE GJNDOAMLNK AEFBJLBGMHPLMLCP BCACOJIFGK AAPHBAJIDCFJGLHN IKABJCDBBK AHKEBJNIIGGECEIH HDDMMFLLIK DDDLLL.
HEX AND NUMERIC TABLE 143 A B APCPGIFKDNGNENEI EPANHOGOCK AHPNIBAMDKEOFMHM LJAKFABHIK AKCBPJCJGIIJCMCE HLIFKKKFJK AEFBJLBGMHPKNMFG FGAOPLOGGK AAPHBAJJDAECFFJN DGOFJPBHFK AFKEBKMFNHHIOOPE FNLCMAMLLK DL.
POWERSCAN® D8530 144 AUTOSCAN PATTERN CODE ÌÄÄsÎ.
NOTES.
NOTES.
DECLARATION OF CONFORMITY EC-049 REV.: 0 Pag.: 1 di 1 08 Datalogic S canning Group Srl Via S. Vitalino, 13 Lippo di Calderara di Reno (BO) 40012 Italy dichiara che declares that the déclare que le be.
Aus t r a l ia Datalogic Scanning Pty Ltd T elephone: [61] (2) 9870 3200 australia.sca nning@datalogic.com France and Benelux Datalogic Scanning Sarl T elephone: [33].01.64.86.7 1.00 france.s canning@datalogic.com Germany Datalogic Scanning GmbH T elephone: 49 (0) 61 51/93 58-0 germany .
Een belangrijk punt na aankoop van elk apparaat Datalogic Scanning D8530 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Datalogic Scanning D8530 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Datalogic Scanning D8530 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Datalogic Scanning D8530 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Datalogic Scanning D8530 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Datalogic Scanning D8530 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Datalogic Scanning D8530 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Datalogic Scanning D8530 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
