Gebruiksaanwijzing /service van het product W04C van de fabrikant Dell
Ga naar pagina of 79
Dell OptiPlex 9010 All-In-One (Touch) Owner's Manual Regulatory Model: W04C Regulatory Type: W04C001.
Notes, Cautions, and Warnings NOTE: A NOTE indicates important information that helps you make better use of your computer. CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. WARNING: A WARNING indicates a potential for property damage, personal injury, or death.
Contents 1 Working on Your Computer....................................................................................................... 7 Before Working Inside Your Computer ..........................................................................
Removing the Input/Output Board Shield ............................................................................................................... 27 Installing the Input/Output Board Shield ........................................................
6 Technical Specifications......................................................................................................... 73 7 Contacting Dell ..................................................................................................
6.
1 Working on Your Computer Before Working Inside Your Computer Use the following safety guidelines to help protect your computer from potential damage and to help to ensure your personal safety.
CAUTION: Before touching anything inside your computer, ground yourself by touching an unpainted metal surface, such as the metal at the back of the computer. While you work, periodically touch an unpainted metal surface to dissipate static electricity, which could harm internal components.
Important Information NOTE: Avoid using the touchscreen in dusty, hot, or humid environments. NOTE: Sudden change in temperature may cause condensation on the inner surface of the glass screen, which will disappear after a short time and does not affect normal usage.
10.
2 Removing and Installing Components This section provides detailed information on how to remove or install the components from your computer. Recommended Tools The procedures in this document may req.
5. Remove the screws that secure the VESA stand to the computer and lift the VESA stand away from the computer. Installing the VESA Stand 1. Align and place the VESA stand on the back of the computer. 2. Tighten the screws to secure the VESA stand to the computer.
4. Lift the cover and remove it from the computer using the notches near the input/output panel. Installing the Back Cover 1. Place the cover on the back of the computer using the notches near the input/output panel. 2. Tighten the screws to secure the back cover to the computer.
3. Lift the memory shield outwards. 4. Pry the retention clips away from the memory module until it pops up. Lift and remove the memory module from its connector. Installing the Memory 1. Align the notch on the memory-card with the tab in the system-board connector.
Installing the VESA Mount Bracket 1. Align and place the bracket on the back of the computer. 2. Tighten the screws to secure the VESA mount bracket to the computer. 3. Install the: a) back cover b) VESA stand 4. Follow the procedures in After Working Inside Your Computer .
Installing the Touchscreen Board 1. Tighten the screws to secure the touchscreen board to the chassis. 2. Connect all the touchscreen-board cables to the connectors on the touchscreen board and secure the latches. 3. Connect the system-board cable to the touchscreen-board cable connector.
4. Install the: a) back cover b) VESA stand 5. Follow the procedures in After Working Inside Your Computer . Removing the System-Board Shield 1. Follow the procedures in Before Working Inside Your Computer . 2. Remove the: a) VESA stand b) back cover c) VESA mount bracket 3.
c) system-board shield 3. Press the release latch away from the battery. The battery pops out from the socket; lift the coin-cell battery out of the computer. Installing the Coin-Cell Battery 1. Place the coin-cell battery into its slot on the system board.
5. Lift the optical drive from the computer. 6. Remove the screws that secure the optical-drive bracket to the optical drive. Remove the optical-drive bracket from the optical drive.
Installing the Optical Drive 1. Place the optical-drive bracket on the optical drive. 2. Tighten the screws that secure the optical-drive bracket to the optical drive. 3. Align and slide the optical drive into its slot. 4. Connect the optical-drive cable.
6. For a 3.5–inch hard drive, remove the screws that secure the hard drive to the hard-drive bracket. Slide the hard drive from the hard-drive bracket. Installing the Hard Drive 1. For a 3.5–inch hard drive, slide the hard drive into the hard-drive bracket.
3. Disconnect the intrusion cable from the connector on the system board. Unthread the cable from the notches on the computer. 4. Remove the screws that secure the intrusion switch to the chassis. Lift the intrusion switch and remove it from the computer.
4. Follow the procedures in After Working Inside Your Computer . Removing the Wireless Local Area Network (WLAN) Card 1. Follow the procedures in Before Working Inside Your Computer . 2. Remove the: a) VESA stand b) back cover c) VESA mount bracket d) system-board shield 3.
4. Remove the screws that secure the power-supply fan to it's chassis and lift it away from the computer. Installing the Power-Supply Fan 1. Place the power-supply fan on the computer and tighten the screws to secure it to it's chassis. 2. Align and place the fan bracket on from the computer.
Removing the Power Supply Unit (PSU) 1. Follow the procedures in Before Working Inside Your Computer . 2. Remove the: a) VESA stand b) back cover c) VESA mount bracket d) system-board shield e) input/output board shield f) power-supply fan 3. Press the tab and disconnect the power-supply cable from the connector on the system board.
Installing the Power Supply Unit 1. Place the power supply unit on the computer. 2. Tighten the screws to secure the power supply unit to the chassis. 3. Thread the cable on the hooks in the computer. 4. Connect the power-supply cable to the connector on the system board.
b) VESA mount bracket c) back cover d) VESA stand 4. Follow the procedures in After Working Inside Your Computer . Removing the Input/Output Board Shield 1. Follow the procedures in Before Working Inside Your Computer . 2. Remove the: a) VESA stand b) back cover c) VESA mount bracket d) system-board shield e) power-supply fan 3.
5. Remove the screws that secure the input/output board shield to the chassis. Loosen the power connector and press it down the socket. 6. Flip the input/output board shield and remove it from the computer.
Installing the Input/Output Board Shield 1. Connect the power-connector cable. 2. Place the input/output board shield on the computer. 3. Pass the power connector and fix it to the socket. Tighten the screws to secure the input/output board shield to the chassis.
Installing the Power-Button Board 1. Align and place the power-button board on the computer. 2. Connect the power-button cable to the board. 3. Install: a) back cover b) VESA stand 4. Follow the procedures in After Working Inside Your Computer . Removing the Processor Fan 1.
Installing the Processor Fan 1. Place the processor fan on the computer and tighten the screws to secure the processor fan to the system board. 2. Connect the processor-fan cable to the connector on the system board. 3. Install: a) system-board shield b) VESA mount bracket c) back cover d) VESA stand 4.
Removing the Speakers 1. Follow the procedures in Before Working Inside Your Computer . 2. Remove the: a) VESA stand b) back cover c) VESA mount bracket d) system-board shield 3. Disconnect the right and left speaker cables from the connector on the system board.
Installing the Speakers 1. Place and align the speakers on the computer. Tighten the screws to secure the speaker to the chassis. 2. Thread the cables on the notches. Connect the right and left speaker cables to the connector on the system board. 3. Install: a) system-board shield b) VESA mount bracket c) back cover d) VESA stand 4.
5. Lift and remove the system board from the chassis. System Board Layout The following image displays the system board layout of the computer. 34.
1. PSU connector 2. PSU fan connector 3. Touch panel connector 4. Power button board connector 5. SATA HDD connector 6. SATA HDD power connector 7. SATA ODD power connector 8. CPU fan connector 9. SATA ODD connector 10. LVDS connector 11. 12V CPU power connector 12.
3. Install: a) power-supply fan b) converter board c) input/output board shield d) power supply unit e) heat-sink assembly f) hard drive g) optical drive h) memory i) system-board shield j) VESA mount bracket k) back cover l) VESA stand 4. Follow the procedures in After Working Inside Your Computer .
NOTE: You can also use the following steps to disable a forgotten password. 1. Follow the procedures in Before Working Inside Your Computer . 2. Remove the: a) VESA stand b) back cover c) VESA mount b.
l) power-supply fan m) power supply unit n) heat-sink assembly o) processor fan p) speakers q) antenna module r) system board NOTE: The display panel should be disassembled in a clean-room environment. 3. Remove the LVDS cable by pressing the latch inwards and disconnecting it from the connector.
6. Lift the connector latches and disconnect the touchscreen-board cables. 7. Lift and remove the display panel from the middle frame. 39.
8. Remove the screws that secure the display brackets to the display panel and remove the display brackets from the display panel. 40.
Installing the Display Panel 1. Tighten the screws that secure the display brackets to the display panel. 2. Align the display assembly over the middle frame. 3. Connect all the touchscreen-board cables to the connectors on the display panel. 4. Affix the tape that adheres the connectors to the display panel.
m) power supply unit n) heat-sink assembly o) power-supply fan p) system board 3. Remove the screws that secure the antenna module to the chassis. Unthread the antenna cable from around the edges of the computer. Lift and remove the antenna module. Installing the Antenna Modules 1.
a) VESA stand b) back cover c) VESA mount bracket d) touchscreen board e) system-board shield f) input/output board shield g) WLAN card h) optical drive i) hard drive j) intrusion switch k) power button board l) converter board m) processor fan n) power supply unit o) heat-sink assembly p) power-supply fan q) system board r) display panel 3.
d) heat-sink assembly e) power supply unit f) processor fan g) converter board h) power-button board i) intrusion switch j) hard drive k) optical drive l) WLAN card m) input/output board shield n) system-board shield o) touchscreen board p) VESA mount bracket q) back cover r) VESA stand 5.
3 System Setup System Setup enables you to manage your computer hardware and specify BIOS ‐ level options. From the System Setup, you can: • Change the NVRAM settings after you add or remove hardw.
Keys Navigation <Enter> Allows you to select a value in the selected field (if applicable) or follow the link in the field. Spacebar Expands or collapses a drop ‐ down list, if applicable. <Tab> Moves to the next focus area. NOTE: For the standard graphics browser only.
Option Description • CD/DVD/CD-RW Drive • Onboard NIC (Portables enables, Desktop disables) Boot List Option • Legacy • UEFI Date/Time This option controls the system date and time.
Option Description USB Configuration This field configures the integrated USB controller. If Boot Support is enabled, the system is allowed to boot any type of USB mass storage devices (HDD, memory key, floppy). If USB port is enabled, device attached to this port is enabled and available for operation system.
Option Description Strong Password Enable strong password - This option is disabled by default. Password Configuration This field controls the minimum and maximum number of characters allowed for the admin and system passwords.
Option Description • Enable CPU XD Support (selected by default) OROM Keyboard Access Allows you to determine if you access the Option Read Only Memory (OROM) configuration screens via hotkeys during boot. These settings prevent access to the Intel RAID (CTRL+I) or Intel Management Engine BIOS Extension (CTRL+P/F12).
Table 6. Power Management Option Description AC Recovery Specifies how the computer will respond when AC power is applied after an AC power loss. You can set the AC Recovery to: • Power Off (selecte.
Option Description • LAN or WLAN — Allows the system to be powered on by special LAN or WLAN signals. Block Sleep This option lets you block entering to sleep (S3 state) in operating system environment. • Block Sleep (S3 state) - This option is disabled by default.
Option Description • Trusted Execution - This option is disabled by default. Table 9. Wireless Option Description Wireless Switch This option determines which wireless device can be controlled by the Wireless Switch. • WWAN • WLAN • Bluetooth Wireless Device Enable This option allows enabling/disabling of internal wireless devices.
Option Description ImageServer Port Allows you to specify the primary IP port of the ImageServer, which is used by the client to communicate. The default IP port is 06910 . NOTE: This field is only relevant when the Integrated NIC control in the System Configuration group is set to Enabled with ImageServer .
Option Description • Memory Information — Displays Memory Installed, Memory Available, Memory Speed, Memory Channels Mode, Memory Technology, DIMM A Size, and DIMM B Size .
Option Description • Disabled — The internal LAN is off and not visible top the operating system. • Enabled — The internal LAN is enabled. • Enabled w/PXE (selected by default) — The internal LAN is enabled (with PXE boot). • Enabled w/ImageServer — The internal LAN is enabled (with ImageServer boot).
Table 15. Security Option Description Admin Password This field lets you set, change, or delete the administrator (admin) password (sometimes called the setup password). The admin password enables several security features. The drive does not have a password set by default.
Option Description Password Change Allows you to determine whether changes to the system and hard disk passwords are permitted when an administrator password is set.
Table 16. Secure Boot Option Description Secure Boot Allows to Enable/Disable Secure Boot. Expert Key Management This gives the choice of Expert Key Management and Custom Mode Key Management. • Expert Key Management • Enable Custom Mode • Custom Mode Key Management • PK • KEK • db • dbx Table 17.
Option Description • Power On • Last Power State Auto On Time This option sets the time of the day when you would like the system to turn on automatically. Time is kept in standard 12-hour format (hour:minutes:seconds). The startup time can be changed by typing the values in the time and A.
Option Description • Block Sleep (S3 state) - This option is disabled by default. Table 19. POST Behavior Option Description Numlock LED Specifies if the NumLock function can be enabled when the system boots. • Enable Numlock (default) Keyboard Errors Specifies whether keyboard related errors are reported when it boots.
Option Description • Bluetooth Table 22. Maintenance Option Description Service Tag Displays the service tag of your computer. Asset Tag Allows you to create a system asset tag if an asset tag is not already set. This option is not set by default. SERR Messages Controls the SERR message mechanism.
Option Description Client SubnetMask Displays the subnet mask of the client. The default setting is 255.255.255.255 . NOTE: This field is only relevant when the Integrated NIC control in the System Configuration group is set to Enabled with ImageServer and when Client DHCP is set to Static IP .
System and Setup Password You can create a system password and a setup password to secure your computer. Password Type Description System password Password that you must enter to log on to your system. Setup password Password that you must enter to access and make changes to the BIOS settings of your computer.
Deleting or Changing an Existing System and/or Setup Password Ensure that the Password Status is Unlocked (in the System Setup) before attempting to delete or change the existing System and/or Setup password. You cannot delete or change an existing System or Setup password, if the Password Status is Locked.
66.
4 Diagnostics If you experience a problem with your computer, run the ePSA diagnostics before contacting Dell for technical assistance. The purpose of running diagnostics is to test your computer's hardware without requiring additional equipment or risking data loss.
Customers can test the health of the power system by pressing the test button. The button is lit by a signal in the power supply called Power_Good (PG). When the +3.3v, +5v, and +12v rails are up and within specification, the PG signal turns on, lighting the self-test LED.
5 Troubleshooting Your Computer You can troubleshoot your computer using indicators like Diagnostic Lights, Beep Codes, and Error Messages during the operation of the computer. Important Information NOTE: Avoid using the touchscreen in dusty, hot, or humid environments.
Blinking Amber Power LED Problem Description 2,6 The processor may be faulty. 2,7 The memory may be faulty. Reseat the memory or install a different memory module. 3,1 The video device or subsystem may be faulty. 3,2 The video subsystem may be faulty.
Message Description the F1 key to continue, F2 to run the setup utility. No boot device available No bootable partition on the hard drive, a cable or connector is loose, or no bootable device exists.
72.
6 Technical Specifications NOTE: Offerings may vary by region. For more information regarding the configuration of your computer, click Start (Start icon) → Help and Support , and then select the option to view information about your computer. Table 25.
Table 28. Audio Feature Specification Controller Intel High Definition Audio with Waves MaxxAudio3 Speaker single 8-ohms speakers in both the left and right speaker assembly (5 W average per channel) .
Table 33. Ports and Connectors Feature Specification Audio: • one line-out connector • one audio input/microphone port • one headphone port Network adapter one RJ45 connector USB 2.0 four USB 3.0 four Video 15-pin VGA connector HDMI one 19-pin output port Media card reader one 8-in-1 slot Table 34.
Table 37. Physical Dimensions Feature Specification Width 574.00 mm (22.60 inches) Height 440.40 mm (17.34 inches) Depth: Without basic stand 68.00 mm (2.68 inches) With basic stand 220.00 mm (8.66 inches) Weight: Without basic stand 7.34 kg – 9.00 kg (16.
Table 39. Environmental Feature Specification Temperature range: Operating 10 °C to 35 °C (50 °F to 95 °F) Storage –40 °C to 65 °C (–40 °F to 149 °F) Relative humidity (maximum): Operating 10% to 90% (non-condensing) Storage 10% to 95% (non-condensing) Maximum vibration: Operating 0.
78.
7 Contacting Dell To contact Dell for sales, technical support, or customer service issues: 1. Visit support.dell.com. 2. Verify your country or region in the Choose a Country/Region drop-down menu at the bottom of the page. 3. Click Contact Us on the left side of the page.
Een belangrijk punt na aankoop van elk apparaat Dell W04C (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Dell W04C heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Dell W04C vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Dell W04C leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Dell W04C krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Dell W04C bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Dell W04C kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Dell W04C . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
