Gebruiksaanwijzing /service van het product AVR-3808 van de fabrikant Denon
Ga naar pagina of 44
- 1 - DENON AVR control protocol Ver. 5.2.0_a Application model : AVR-3808/AVC-3808 Application terminal: RS-232C/ Ethernet Connector specificat ion Ⅰ .
- 2 - Ⅱ . Ethernet Connector type ： RJ-45(10BASE-T/100BASE-TX) Communication format ： Communication system : A half duplex Communication speed : 10Mbps/100Mbps Communication port : TCP port 23 (.
- 3 - NETWORK SETUP of AVR-4308 >Procedure of Network Setup mode. (1)Press SYSTEM SETUP button, then System Setup Me nu appears on FL-display(and GUI) (2)Select “Network Setup > Detail” . (3)Set parameters described below. <DHCP> "ON"---Use this setting when DHCP server is on the local network.
- 4 - Ⅱ . Ethernet Connector type ： RJ-45(10BASE-T/100BASE-TX) Communication format ： Communication system : A half duplex Communication speed : 10Mbps/100Mbps Communication port : TCP port 23 (.
- 5 - NETWORK SETUP of AVR-3808 >Procedure of Network Setup mode. (1)Press SYSTEM SETUP button, then System Setup Me nu appears on FL-display(and GUI) (2)Select “Network Setup > Detail” . (3)Set parameters described below. <DHCP> "ON"---Use this setting when DHCP server is on the local network.
- 6 - Protocol speci fication The following three data forms are defined. COMMAND : The message sent to a system(AVR) from a controlle r(Touch Panel etc.) A command to a system is given from a controller. EVENT : The message sent to a controller (Touch Panel etc.
- 7 - The example of a command * <CR> is the meaning of 0x0D. SIDVD<CR> : Select Input source DVD MSSTEREO<CR> : surround Mode Set to STEREO MVUP<CR> : Master Volume UP PWON<.
- 8 - Others A) COMMAND is receivable also during transmission of EVENT . B) Since CHANNEL VOLUME changes simultaneou sly when the SURROUND MODE changes, the value of t he channel volume of all channels returns as EVENT . C) CHANNEL VOLUME returns the data of A LL channels by the presen t SURROUND MODE also including an intact channel.
- 9 - COMMAND and PARAMETER list COMMAND PARAMETER function example PW ON POWER ON/S TANDBY change PWON<CR> STANDBY PWSTANDBY<CR> ? Return PW Status PW?<CR> MV UP MASTER VOL UME UP/D.
- 10 - COMMAND PARAMETER function example CV SB UP ---SURROUND BACKch (SBch 1SP) CVSB UP<CR> SB DOWN CVSB DOWN<CR> SB ** **:00 to 99 by ASCII , 50=0dB CVSB 50<CR> ? Return CV Status .
- 1 1 - COMMAND PARAMETER function example SD AUTO set AUTO mode (Prior ity:HDMI>>DIGITAL>>ANALOG) SDAUTO<CR> HDMI set force HDMI INPUT mode SDHDMI<CR> DIGITAL set force DIGITAL INPUT (Optical,Coaxial)mode SDDIGITAL<CR> ANALOG set force ANALOG INPUT mode SDANALOG<CR> EXT.
- 12 - COMMAND PARAMETER function example MS CLASSIC CONCERT MSCLASSIC CONCERT<CR> MONO MOVIE MSMONO MOVIE<CR> MATRIX MSMATRIX<CR> VIDEO GAME MSVIDEO GAME<CR> VIRTUAL MSVIRTUAL.
- 13 - COMMAND PARAMETER function example PS TONE DEFEAT ON PARAMETER setting PSTONE DEFEAT ON<CR> TONE DEFEAT OFF TONE DEFEAT ON/OFF PSTONE DEFEAT OFF<CR> TONE DEFEAT ? Return PSTONE DEFE.
- 14 - COMMAND PARAMETER function example PS TRE UP TREBLE UP/DOWN , direct change to **dB PSTRE UP<CR> TRE DOWN **:00 to 99 by ASCII , 50=0dB PSTRE DOWN<CR> TRE ** ---AVR-3808 can be oper.
- 15 - COMMAND PARAMETER function example PS PAN ON PANORAMA O N/OFF PSPAN ON<CR> PAN OFF PSPAN OFF<CR> PAN ? Return PSPAN Status PSPAN ?<CR> DIM UP DIMENSION UP/DOWN , direct change.
- 16 - COMMAND PARAMETER function example PS NIGHT OFF NIGHT MODE direct change PSNIGHT OFF<CR> NIGHT LOW PSNIGHT LOW<CR> NIGHT MID PSNIGHT MID<CR> NIGHT HI PSNIGHT HI<CR> NIGH.
- 17 - Z2 COMMAND : "*" parameter uses two ASCII characte rs. (see page4 J) section) COMMAND PARAMETER function example Z2 PHONO MULTI ZONE-2 mode set , and select source at AVR-3808 Z2PHONO<CR> | ---The name of PARAMETER is | IPOD the same as that of the time of SI COMMAND.
- 18 - Z2 COMMAND : "*" parameter uses two ASCII characte rs. (see page4 J) section) Except Japan model. COMMAND PARAMETER function example Z2PS BAS UP ZONE2 BASS UP/DOWN , direct change to .
- 19 - Z3 COMMAND : "*" parameter uses two ASCII characte rs. (see page4 J) section) Except Japan model COMMAND PARAMETER function example Z3 PHONO MULTI ZONE-3 mode set , and select source at AVR-3808 Z3PHONO<CR> | ---The name of PARAMETER is | IPOD the same as that of the time of SI COMMAND.
- 20 - Z3 COMMAND : "*" parameter uses two ASCII characte rs. (see page4 J) section) Except Japan model COMMAND PARAMETER function example Z3PS BAS UP ZONE3 BASS UP/DOWN , direct change to *.
- 21 - ※ ANALOG TUNER Control (AVR model only) COMMAND PARAMETER function example TF ANUP TUNER Frequency UP/DOWN TFANUP<CR> ANDOWN TFANDOWN<CR> AN****** (6 digits) --- ****.** kHz at AM band (>050000 is AM.) ****.** MHz at FM band (<050000 is FM.
- 22 - ※ XM Control(North America model only) COMMAND PARAMETER function example TF XMUP XM Channel UP/DOWN TFXMUP<CR> XMDOWN TFXMDOWN<CR> XM*** (3 digits) --- ***:XM CH No. TFXM001<CR> (XM001 CH at XM) XM? Return TFXM Status TFXM?<CR> TP XMUP XM PRESET CH UP/DOWN , direct change to No.
- 23 - ※ iRadio/mServer/USB Extended Control COMMAND PARAMETER function example SI USB Select INPUT source NET/USB and USB Start Playback SIUSB<CR> Z2 USB Select MULTI ZONE-2 source NET/USB an.
- 24 - ※ iPod Extended Control COMMAND PARAMETER function example IP 90 “Cursor Up” Control IP90<CR> 91 “Cursor Down” Control IP91<CR> 92 “Cursor Left” Control IP92<CR>.
- 25 - ※ Cursol/Enter/Menu(Setup) COMMAND PARAMETER function example MN CUP “Cursor Up ” Control MNCUP<CR> CDN “Cursor Down” Control MNCDN<CR> CLT “Cursor Left” Control MNCLT.
- 26 - ※ Remote Lock/Panel Lock COMMAND PARAMETER function example SY REMOTE LOCK ON REMOTE CONTROL LOCK ON/OFF SYREMOTE LOCK ON<CR> REMOTE LOCK OFF SYREMOTE LOCK OFF<CR> PANEL LOCK ON PANEL BUTTON(Except MASTER VOL.)CONTROL LOCK ON SYPANEL LOCK ON<CR> PANEL+V LOCK ON PANEL BUTTON & MASTER VOL.
- 27 - EVENT(or RESPONSE) and PARAMETER list EVENT PARAMETER function example PW ON POWER ON/STANDBY change PWON<CR> STANDBY PWSTANDBY<CR> MV ** MASTER VOLUME change , **:00 to 99 by ASCII.
- 28 - EVENT PARAMETER function example SI NET/USB SINET/USB<CR> XM (North America model Only) SIHDRADIO<CR> USB SIUSB<CR> IPOD SIIPOD<CR> ZM ON MAIN-ZONE ON/OFF change ZMON<.
- 29 - EVENT PARAMETER function example MS DIRECT SURROUND mode change MSDIRECT<CR> PURE DIRECT MSPURE DIRECT<CR> STEREO MSSTEREO<CR> MULTI CH IN MSMULTI CH IN<CR> MULTI CH IN .
- 30 - EVENT PARAMETER function example MS DTS NEO:6 C MSDTS NEO:6 C<CR> DTS NEO:6 M MSDTS NEO:6 M<CR> DTS SURROUND MSDTS SURROUND<CR> DTS ES DSCRT6.
- 31 - EVENT PARAMETER function example MS NEURAL (North America model Only) MSNEURAL<CR> DOLBY D+ MSDOLBY D+ <CR> DOLBY D+ +EX MSDOLBY D+ +EX<CR> DOLBY D+ +PL2x C MSDOLBY D+ +PL2X C.
- 32 - EVENT PARAMETER function example PS TONE DEFEAT ON TONE DEFEAT ON/OFF change PSTONE DEFEAT ON<CR> TONE DEFEAT OFF PSTONE DEFEAT OFF<CR> SB:MTRX ON SURROUND BACK MODE change PSSB:MTR.
- 33 - EVENT PARAMETER function example PS DRC AUTO DRC change PSDRC AUTO<CR> DRC LOW PSDRC LOW<CR> DRC MID PSDRC MID<CR> DRC HI PSDRC HI<CR> DRC OFF PSDRC OFF<CR> DCO OFF D.
- 34 - EVENT PARAMETER function example PS DELAY *** AUDIO DELAY change, ***:000 to 999 by ASCII PSDELAY 200<CR> ---AVR-3808 ： 200=200ms （ MAX ） 100=100ms, 000=0ms NIGHT OFF NIGHT MODE cha.
- 35 - EVENT PARAMETER function example Z2 PHONO MULTI ZONE-2 source change Z2PHONO<CR> | ---The name of PARAMETER is | IPOD the same as that of the time of SI COMMAND.
- 36 - EVENT PARAMETER function example Z3 PHONO MULTI ZONE-3 source change Z3PHONO<CR> | ---The name of PARAMETER is | IPOD the same as that of the time of SI COMMA ND.
- 37 - ※ ANALOG TUNER Control(AVR model only) EVENT PARAMETER function example TF AN****** (6 digits) TUNER Frequency change TFAN105000<CR> --- ****.** kHz at AM band (1050.00kHz at AM) ****.** MHz at FM band TP AN**(PRESE T No.) TUNER PRESET change to No.
- 38 - ※ iRadio/mServer/USB Extended Control EVENT PARAMETER function NSA Onscreen Display Information is Answered By the NSA Command. 0 Display Line1 Information NSA0**************_?????<CR> .
- 39 - EVENT PARAMETER function NSE Onscreen Display Information(mserver/iRadio) is Answered By the NSE Command. 0 Display Line1 Information NSE0**************_?????<CR> 1 Display Line3 Informat.
- 40 - ※ iPod Extended Control EVENT PARAMETER function IPA Onscreen Display Information is Answered By the IPA Command. 0 Display Line1 Information IPA0***************_???<CR> 1 Display Line3.
- 41 - EVENT PARAMETER function IPA <example1> IPA0Artist??????????????????<CR> IPA1 ※ Ana Caram_????????????<CR> IPA2 ※ Badi Assad_???????????<CR> IPA3 ※ Christy Baron_?.
- 42 - EVENT PARAMETER function IPE Onscreen Display Information(iPod) is Answered By the IPA Command. 0 Display Line1 Information IPE0***************_???<CR> 1 Display Line3 Information IPE1 .
- 43 - EVENT PARAMETER function IPE <example1> IPE0Artist??????????????????<CR> IPE1 ※ Ana Caram_????????????<CR> IPE2 ※ Badi Assad_???????????<CR> IPE3 ※ Christy Baron_?.
- 44 - ※ Remote Lock/Panel Lock EVENT PARAMETER function example SY REMOTE LOCK ON REMOTE CONTROL LOCK ON/OFF SYREMOTE LOCK ON<CR> REMOTE LOCK OFF SYREMOTE LOCK OFF<CR> PANEL LOCK ON PANEL BUTTON(Except MASTER VOL.)CONTROL LOCK ON SYPANEL LOCK ON<CR> PANEL+V LOCK ON PANEL BUTTON & MASTER VOL.
Een belangrijk punt na aankoop van elk apparaat Denon AVR-3808 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Denon AVR-3808 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Denon AVR-3808 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Denon AVR-3808 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Denon AVR-3808 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Denon AVR-3808 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Denon AVR-3808 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Denon AVR-3808 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
