Gebruiksaanwijzing /service van het product POE-5010HD van de fabrikant AirLive
Ga naar pagina of 77
Use r ’ s Manual POE 5 Mega-Pixel Box Type IP Camera with ICR POE-5010HD.
Copyright and Disclaimer AirLive POE-5010HD User ’s Manual Copyright & Disclaimer No part of this publication may be reproduc ed in any form or by any means, whether electronic, mechanical, photocopying, or record ing without the written consent of OvisLink Corp.
T able of Contents i AirLive POE-5010HD User’s Manual Table of Contents 1. Overview .....................................................................................................1 1.1 Introduction .............................................
T able of Contents AirLive POE-5010HD User ’s Manual ii 5.4 Security ..............................................................................................35 5.4.1 Acc ount ....................................................................
1. Overview AirLive POE-5010HD User ’s Manual 1 1 1. Overview This user’s guide explains how to operate this camera from a computer. User should r ead this manual completely and carefully before you operate the device. 1.1 Introduction Thank you for purchasing the PoE H.
1. Overview AirLive POE-5010HD User ’s Manual 2 1.2 Features Easy installation with setup wizard UPnP device discovery and NA T router transversal for easy installation Dynamic IP Service, DIPS®, to se arch your IP camera from Internet easily 0.
1. Overview AirLive POE-5010HD User ’s Manual 3 1.3 Minimum System Requirement s Microsoft Internet Ex plorer 6.0 or later Microsoft Media Player 1 1.0 or later (to playback recorded file) VGA Monitor resolution 1280 x 1024 or higher Pentium-4 2.
2. Package Content s AirLive POE-5010HD User ’s Manual 4 2 2. Package Content s User can find the following items in the package as below: Item Descriptions 1. This Unit is the main element of the product. And Camera Mount Kit and pads Note: The lens is optional .
2. Package Content s AirLive POE-5010HD User ’s Manual 5 Note: 1.) Using a power supply with a differ ent voltage than the one included with the Network Camera will cause damage and void the warranty for this product. 2.) This product does not come with l ens.
2. Package Content s AirLive POE-5010HD User ’s Manual 6 Note: Restoring the factory default setting will lose the all previous settings included IP address forever. User needs to run the IPWiza rd II program to search the device and configure it to let the dev ice work properly again.
2. Package Content s AirLive POE-5010HD User ’s Manual 7 2. GPIO/RS-485: Connect to a local keyboard controller. DI/ DO: Connect to sensor in and alarm out devices Cable for I/O connectors: PIN .
2. Package Content s AirLive POE-5010HD User ’s Manual 8 2.2 Connections Mounting the Camera 1. Attaching the Wall Mount Kit The W all Mount Kit that is provided in t he package has a swivel ball screw head, so that can you can attach it to the screw hole on the camera’ s top (or bottom) panel.
2. Package Content s AirLive POE-5010HD User ’s Manual 9 3. Connect the external power supply to Camera Connect the attached power adapter to the DC power jack of the camera. Note : Use the power adapter, 12V DC, included in the package and connect it to wall outlet for AC power.
2. Package Content s AirLive POE-5010HD User ’s Manual 10 When you use a DC-Iris lens on your camera , you can adjust the brightness of the video image through the Iris Level screw-know on the back panel of the camera. Adjusting the Focus Y ou can use the provided L-type wrench to adjust the lens focus.
2. Package Content s AirLive POE-5010HD User ’s Manual 11 5. Applications of the Camera The camera can be applied in multiple applications, including: z Monitor local and remote places and objects via Internet or Intranet. z Capture still images and video clips remotely .
3. Preparation AirLive POE-5010HD User ’s Manual 12 3.1 Search and Set up by IPWizard II When you installed the Camera on a LAN envi ronment, you have two easy ways to search your Cameras by IPWizard II or UPnP™ discover y . Here is the way to execute IPWizard II to discover Camera’ s IP address and se t up related p arameter in a Camera.
3. Preparation AirLive POE-5010HD User ’s Manual 13 LAN In case you want to change the IP related para meters of wired interfac e, please select the device you want to c onfigure and click the LAN button. Relative settings will be carried out as below .
3. Preparation AirLive POE-5010HD User ’s Manual 14 In case, you do not want to change usernam e and/or password, then just cl ick “ Submit ” button to perform your setting accordingly . Click “ << ” button will go back to previous page.
3. Preparation AirLive POE-5010HD User ’s Manual 15 Wireless This model does not support wireless function. Ther efore, IPWizard II disables this function automatically .
3. Preparation AirLive POE-5010HD User ’s Manual 16 3.3 Inst all the Device behind a NA T Router Once installed, the device is accessible on your LAN. T o access the device from the Internet you must configure your broadband router to allow incoming data traffic to the device.
3. Preparation AirLive POE-5010HD User ’s Manual 17 3.4 Access the device from the Internet Explorer for the first time 1. S tart the web browser on the computer and type the IP address of the Network Camera you want to monitor as below: The Login Window of the Camera is prompted: 2.
3. Preparation AirLive POE-5010HD User ’s Manual 18 4. After the ActiveX control was install ed and ran, the first im age will be displayed. Logging in as an User If you log in the Camera as an ordinary User , “Setting” function wi ll be not accessible.
4. Operating the Network Camera AirLive POE-5010HD User ’s Manual 19 S tart-up screen will be as follow no matter an ordinary users or an administrator . Monitor Image Section The image shot by the Network Camera is s hown here. The date and time are displayed at the top of the window.
4. Operating the Network Camera AirLive POE-5010HD User ’s Manual 20 Function Buttons You can use the function buttons above the win dow to control the camera’s audio, video, and zoom functions. z : Click to display the live vi ew image of the camera.
5. Administrating the Device AirLive POE-5010HD User ’s Manual 21 System Setting This function is only available for user logged into Network Camera as administrator .
5. Administrating the Device AirLive POE-5010HD User ’s Manual 22 Status The S tatus menu provides t he current status of the camera, including the basic informa tion, audio/video settings, networking configurat ion, and system logs. 5.1 System Setting: Configure and maint ain system 5.
5. Administrating the Device AirLive POE-5010HD User ’s Manual 23 Date and T ime: Enter the correc t date and time for the sy stem. - Time Zone: Select the proper time zone for the region from the pull-down menu. - DayLight Saving: Select this option if the Daylig ht Saving T ime is used in your location.
5. Administrating the Device AirLive POE-5010HD User ’s Manual 24 Factory Reset: Click Reset to restore all factory def ault settings for the camera. Reboot: Click Reboot to restart the camera just like turning the device off and on. The camera configuration will be retained af ter rebooting.
5. Administrating the Device AirLive POE-5010HD User ’s Manual 25 5.2.1 General DHCP / St atic IP: This field allows you to select the IP addr ess mode and set up the related configuration. The avail options include: DHCP IPv4 , DHCP IPv4/IPv6 , and St atic IPv4/IPv6 .
5. Administrating the Device AirLive POE-5010HD User ’s Manual 26 Default Gateway Enter the Default Gateway of the camera. The default setting is 192.168.1.254 Primary/ Secondary DNS DNS (Domain Name System) tran slates domain names into IP addresses.
5. Administrating the Device AirLive POE-5010HD User ’s Manual 27 NOTE Once the camera get an IP address from the ISP as starting up, it automatically sends a notification email to you. Theref ore, when you select PPPoE as your connecting type, you have to set up the em ail or DDNS configuration in advance.
5. Administrating the Device AirLive POE-5010HD User ’s Manual 28 Bonjour: The devices with Bonjour will automatic ally broadcast their own services and listen for services being offered for the use of others.
5. Administrating the Device AirLive POE-5010HD User ’s Manual 29 The IP Filter setting allows the administrator of the camera to limit the users within a certain range of IP addresses to access the camera.
5. Administrating the Device AirLive POE-5010HD User ’s Manual 30 SMTP Notification (e-mail): If enable this function, then the “ Send to “ and “ Subject ” fields need to be filled. Send To: T ype the receiver ’s e-mail address. Th is address is used for reply mail.
5. Administrating the Device AirLive POE-5010HD User ’s Manual 31 5.3 Audio/V ideo/Image The Audio/Video/Image menu contains three sub-menus to provide the video and audio settings for the camera. When completed, click Apply to save the settings. 5.
5. Administrating the Device AirLive POE-5010HD User ’s Manual 32 NOTE When High Resolution is disabled, you can only set the Video Resolution as 1280x720 (720P) , 720x480 (D1) , 640x480 (VGA) , 320x240 (QVGA) , or 176x144 (QCIF) .
5. Administrating the Device AirLive POE-5010HD User ’s Manual 33 5.3.3 Image Brightness: Adjust the brightnes s level from 0~255. Contrast: Adjust the contrast level from 0~255. Saturation: Adjust the colors level from 0~255. Sharpness: Adjust the sharpness level from 0 ~ 100.
5. Administrating the Device AirLive POE-5010HD User ’s Manual 34 Overlay Setting: This option is used to set the im age overlay and mask feature of the camera. - Enable Time St amp: Select this option to display the date & time information on the live view image.
5. Administrating the Device AirLive POE-5010HD User ’s Manual 35 5.3.4 ROI ROI means Region of Interest. When the main stream is set to High Resolution, user can select specified region for monitoring, for th is will saving the bandwidth if there are too many collision on the network.
5. Administrating the Device AirLive POE-5010HD User ’s Manual 36 5.4.1 Account Admin T o prevent unauthorized access to the camera’s W eb Configuration, you are strongly recommend to change the default administrat or password. T ype the administ rator password twice and then click Modify to set and confirm the p assword.
5. Administrating the Device AirLive POE-5010HD User ’s Manual 37 Guest - User Nam e/Password/Confirm Passw ord: Enter the user ’s name you want to add to use the camera. Then, enter the p assw ord twice for the new user . When done, click Add to add the new user for the camera.
5. Administrating the Device AirLive POE-5010HD User ’s Manual 38 5.5.1 Event Event Att achment: Select One Snap shot to send the alert message with one still image captured by the camera, or select H264 V ideo to send the alert message with one video clip recorded by the camera.
5. Administrating the Device AirLive POE-5010HD User ’s Manual 39 - T est FTP: When done, click the button to test the FTP server . NOTE Due to the network environment, the came ra may not upload number of images that you set. SMTP Event Server: Select Enable to enable the SMTP server for the camera.
5. Administrating the Device AirLive POE-5010HD User ’s Manual 40 TCP Server: Select Enable to enable the TCP server for the camera. - TCP Server Address: Enter the IP address of the TCP server . - TCP Port: Set port number of TCP server NOTE Due to the network environment, the came ra may not upload number of images that you set.
5. Administrating the Device AirLive POE-5010HD User ’s Manual 41 Follow the steps below to set up t he Event Schedule for the camera: 6. Select Enable and enter the Event Name .
5. Administrating the Device AirLive POE-5010HD User ’s Manual 42 - ered. Please note ation functi on, is connected to the camera. n on the 9. W vent profile will be added to the Event list. IP T o change/remove the event profile, select the desired profile from the Event list and te .
5. Administrating the Device AirLive POE-5010HD User ’s Manual 43 to enable of th e camera. The camera provides three detecting areas. l n for the camera: move the detecting area and change the area coverage. 3. Set the Percent age and Sensitivity (1~99) for detecting motion to record video.
5. Administrating the Device AirLive POE-5010HD User ’s Manual 44 - Maxim uploaded e date & time information on the attachment. z Recording Schedule: Select Always to enable recording continuously , or select From and then set the day and time to record.
5. Administrating the Device AirLive POE-5010HD User ’s Manual 45 S-485 nually . hen you select this option, you need to complete the required settings of Port Setting . est each command that you have assigned. In the Extended Command 1~5 string boxes, you can customize more buttons and settings for your needs.
Appendix A: Alarm I/O Connector AirLive POE-5010HD User ’s Manual 46 Appendix A: Alarm I/O Connector Some features of the Camera c an be activated by the external sensor that senses physical changes in the area Camera is monitoring. These changes can include intrusion detection or certain physical change in the monitored ar ea.
Appendix A: Alarm I/O Connector AirLive POE-5010HD User ’s Manual 47 Explanation of External I/O Circuit Diagram: CAUTION! • THE LOW VOLTAGE/CURRENT CIRC UITS AND HIGH VOLTAGE/ CURRENT CIRCUITS ARE IN THE NETWORK C AMERA CIRCUIT. TH E QUALIFIED ELECTRICIAN SHOULD DO THE WIRING NOT BY YOURSELF.
Appendix B: Frequently Asked Questions AirLive POE-5010HD User ’s Manual 48 Appendix B: Frequently Asked Questions Question Answer or Resolution Features The video and audio codec is adopted in the device. The device utilizes H.264, MPEG4 and JPEG triple compression to providing high quality images.
Appendix B: Frequently Asked Questions AirLive POE-5010HD User ’s Manual 49 2. Reconfigure the device. Forgot the IP address of the device. Check IP address of device by usi ng the IPWizard II program or by UPnP discovery. IPWizard II program cannot find the device.
Appendix B: Frequently Asked Questions AirLive POE-5010HD User ’s Manual 50 The IP address and Subnet Mask of the PC and Network Camera must be in the same class of the private IP address on the LAN. • Make sure the http port used by the Network Camera, default=80, is forward to the Network Camera’s private IP address.
Appendix B: Frequently Asked Questions AirLive POE-5010HD User ’s Manual 51 security settings prohibit downloading ActiveX controls”. The device work locally but not externally. • Might be caused from the firewall protection. Check the Internet firewall with your system or network administrator.
Appendix B: Frequently Asked Questions AirLive POE-5010HD User ’s Manual 52 Camera is bad. the lens can degrade the image quality. The color of the image is poor or strange.
Appendix C: PING IP Addre ss AirLive POE-5010HD User ’s Manual 53 Appendix C: PING IP Address The PING (stands for Packet Internet Gr oper) command is used to detect whether a specific IP address is accessible by sending a packet to the specific address and waiting for a reply.
Appendix D: Bandwid th Estimation AirLive POE-5010HD User ’s Manual 54 Appendix D: Bandwid th Estimation The frame rate of video transmitted from the device depends on connection bandwidth between client and server, video resolution, c odec type, and quality setti ng of server.
Appendix E: S pecifications AirLive POE-5010HD User ’s Manual 55 Appendix E: S pecifications Camera Image Device 5 Mega-pixel image sensor Effective Pixels 2592 x 1944 pixels Sensitivity 0.5V/lux-sec (550nm) Signal to Noise 44dB Lens F:1.2 ; f:4mm, C/CS mount (optional) IRIS Control DC IRIS IP Module Video Video Encoder H.
Appendix E: S pecifications AirLive POE-5010HD User ’s Manual 56 Motion Detection 3-zone video motion detection Alarm Events Events Triggered by Motion Detection or GPIO or According to Schedule Ima.
Appendix F: Configure Port Forwarding Manually AirLive POE-5010HD User ’s Manual 57 Appendix F: Configure Port Forwarding Manually The device can be used with a router.
Appendix F: Configure Port Forwarding Manually AirLive POE-5010HD User ’s Manual 58 Y our W AN IP Addre ss will be listed here. Note: Because a dynamic W AN IP can change from time to time depending on your ISP , you may want to obtain a S tatic IP address from your ISP .
Appendix F: Configure Port Forwarding Manually AirLive POE-5010HD User ’s Manual 59 Follow these steps to configure your router ’s V irtual Server settings • Click Enabled . • Enter a unique name for each entry. • Select Both under Protocol Type ( TCP and UDP ) • Enter your camera’s local IP Address (e.
Appendix F: Configure Port Forwarding Manually AirLive POE-5010HD User ’s Manual 60 Enter valid ports in the V irtual Server section of your router . Please make sure to check the box on this line to enable settings. Then the devic e can be access from W AN by the router ’s W AN IP Address.
Appendix G: DDNS Application AirLive POE-5010HD User ’s Manual 61 Appendix G: DDNS Application 1. Preface If you have a Cable modem or xDSL, this is a great way to host your own Networked Device or other TCP/IP Service. Get your own domain like w ww.
Appendix G: DDNS Application AirLive POE-5010HD User ’s Manual 62 3. Application S tep s—DDNS & Domain Name (1). V isit the following web site: http://www .
Appendix G: DDNS Application AirLive POE-5010HD User ’s Manual 63 (4). Fill the application agreement and necessary information. a. Username b. E-mail address and confirmation c.
Appendix G: DDNS Application AirLive POE-5010HD User ’s Manual 64 (5). Check your e-mail mailbox. There wil l be an e-mail with a title “Y our DynDNS Account Information“. Click the hyperlink addr ess to confirm the DDNS service that you just applied.
Appendix G: DDNS Application AirLive POE-5010HD User ’s Manual 65 Input your account (7). If the correct username and passw ord are input, you can see the following picture at the top -right of the login page. ( 8 ) . C l i c k t h e “ Services”.
Appendix G: DDNS Application AirLive POE-5010HD User ’s Manual 66 (10). Click the “ Get S tarted ”. (1 1). We could create a domain name without any charge at this step. First, we input the host name. (Pink No.1) Then we pick a domain that is easy to remember .
Appendix G: DDNS Application AirLive POE-5010HD User ’s Manual 67 4. Setup the DDNS and PPPoE of Networked Device At last, users have to enter the web p age of Networked Device and setup the necessary information of DDNS and PPPoE after the applicat ion of DDNS service.
Appendix H: Power Line Frequ ency AirLive POE-5010HD User ’s Manual 68 Appendix H: Power Line Frequency COUNTR Y VOL T AGE FREQUENCY COMMENTS Argentina 220V 50 Hz *Neutral and line wires are reversed from that used in Australia and elsewhere. Australia 230V* 50 Hz *Outlets typically controlled by adjacent switch.
Appendix I: 3GPP AirLive POE-5010HD User ’s Manual 69 Appendix I: 3GPP To use the 3GPP function, in add ition to previous section, you might need more information or configuration to make this function work.
Appendix J: Enable UPnP of Windows XP AirLive POE-5010HD User ’s Manual 70 Appendix J: Enable UPnP of Windows XP Use the following steps to enable UPnP settings only if your operati ng system of PC is running Windows XP .
Appendix J: Enable UPnP of Windows XP AirLive POE-5010HD User ’s Manual 71 Click Add/Remove Windows Components The following screen will appear: Select Networking Services , and then click Details.
Appendix J: Enable UPnP of Windows XP AirLive POE-5010HD User ’s Manual 72 Select Universal Plug and Play , and then click OK Click Next.
Appendix J: Enable UPnP of Windows XP AirLive POE-5010HD User ’s Manual 73 Please wait while Setup configures the components. Click Finish.
Een belangrijk punt na aankoop van elk apparaat AirLive POE-5010HD (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen AirLive POE-5010HD heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens AirLive POE-5010HD vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding AirLive POE-5010HD leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over AirLive POE-5010HD krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van AirLive POE-5010HD bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de AirLive POE-5010HD kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met AirLive POE-5010HD . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
