Gebruiksaanwijzing /service van het product 1862-MF-61-7 van de fabrikant Digital Spectrum
Ga naar pagina of 32
Copyright © 2006 Digital Spectrum Solutions, Inc. Page 58 19. Contacting Technical Support North America: Digital Spectrum Solutions, Inc 17811 Mitchell North Irvine, CA 92614 PHONE: 888-999-073 2 OR 949-252-1111 Fax: 949-252-9397 WEB: WWW.DS ICENTRAL.
Copyright © 2006 Digital Spectrum Solutions, Inc. Page ii 7.1 Preparing t he MemoryFram e ............................................................... 19 8. Configure Mem oryFrame for Photo Shari ng ....................................... 23 9. Transferring Slideshows to/from MemoryFrame .
Copyright © 2006 Digital Spectrum Solutions, Inc. Page 56 18. MemoryFrame Limited Warranty Digital Spectrum Solutions, Inc. warrants this product to be free from manufacturing defects for a period of 1 year from the date of invoice to the end user (Customer).
Copyright © 2006 Digital Spectrum Solutions, Inc. Page 1 1. Introduction Welcome to the future of personal digital imaging. Digital Spectrum is “Bringing Your Digital Lifestyle Into View”.
Copyright © 2006 Digital Spectrum Solutions, Inc. Page 54 Connect the larger “standard USB” c onnector to the USB port of the PC. Connect the smaller “mini-USB” connector to the “PC” connector of the MemoryFrame .
Copyright © 2006 Digital Spectrum Solutions, Inc. Page 3 1.4 MemoryFra me Feature Set MemoryFrame includes functions and features that set it apart from other digital picture frames: Feature Comment 10.
Copyright © 2006 Digital Spectrum Solutions, Inc. Page 52 16.1 Federal Communications Commission Statement Instructions to User: This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC rules.
Copyright © 2006 Digital Spectrum Solutions, Inc. Page 2 4. Getting Started The following sections provide step-b y-step instructions on setting up a MemoryFrame for the first time. 4.1 Unpacking a MemoryFrame The MemoryFrame unit is wrapped in a cardboard shock-absorbent holder.
Copyright © 2006 Digital Spectrum Solutions, Inc. Page 50 • Unit was turned on without the do ngle attached. The Beta release firmware only detects the wireless dongle on power-up. Turn off the MemoryFrame , plug in the dongle and restart the unit.
Copyright © 2006 Digital Spectrum Solutions, Inc. Page 4 5. Control Buttons and Connectors This section briefly summarizes the main control buttons and connectors.
Copyright © 2006 Digital Spectrum Solutions, Inc. Page 48 either a PC (running Digital PixMaster software) or a USB memory-card- reader in order to get its images into the MemoryFrame . Check the Digital Spectrum website for a list of cameras which are compliant to the Microsoft USB Mass Storage specificati on.
Copyright © 2006 Digital Spectrum Solutions, Inc. Page 6 MemoryFrame is displaying a slideshow, and does not respond while in the Menu system. Internal Microphone When using MemoryFrame without a PC, the internal microphone is used to directly record your voice or music.
Copyright © 2006 Digital Spectrum Solutions, Inc. Page 46 • Do not disassemble and reassemble the module. This will void the warranty. • Do not expose the unit to strong vibration or shock.
Copyright © 2006 Digital Spectrum Solutions, Inc. Page 8 and playback. Digital PixMaster also allows you to upgrade the embedded operating system in the MemoryFrame as new features and enhancements become available (see Upgrading MemoryFrame Software in Section 17).
Copyright © 2006 Digital Spectrum Solutions, Inc. Page 44 12.3 Steps to Create 16:9 Content for MemoryFrame (Portrait) Step 1: Create the 9:16 Source Image This time divide the height by the width to check the dimensions. The image should be 1.7778 times taller (16 / 9) that it is wide.
Copyright © 2006 Digital Spectrum Solutions, Inc. Page 10 5. Press “Continue Anyway” to continue the installation. MemoryFrame will not impair or destabilize XP and this is just a warning about digitally signed drivers. 6. Some versions of Windows® automa te the following steps so that you may not have to perform or see each of them.
Copyright © 2006 Digital Spectrum Solutions, Inc. Page 42 Step 1: Create the 16:9 Source Image Prepare an image at 16:9 aspect ratio that is larg er than 800x600. When viewed with an image editor, the image will look normal, just really wide. It should not appear stretched.
Copyright © 2006 Digital Spectrum Solutions, Inc. Page 12 insert images into the Digital PixM aster™ template, or select images from any application, directory, CD, DVD, etc.
Copyright © 2006 Digital Spectrum Solutions, Inc. Page 40 11.5.13 Network Information This menu is used to view th e network information for a U SB Network device such as Ethernet or 802.11 wireless networks. The settings that are presented are shown in Figure 26.
Copyright © 2006 Digital Spectrum Solutions, Inc. Page 14 You can also apply a setting to all slid es by clicking Edit, Select All (Ctrl- A). Figure 8 below shows the Image Properties screen.
Copyright © 2006 Digital Spectrum Solutions, Inc. Page 38 11.5.7 Delete All Slides From Memory Selecting this function will cause all stored images in the MemoryFrame to be permanently deleted. One may wish to do this if the goal is to subsequently fill the entire MemoryFrame fro m a camera, thumb drive or card-reader.
Copyright © 2006 Digital Spectrum Solutions, Inc. Page 16 6.16 Display Time This function is used to select the period of time that the image is displayed.
Copyright © 2006 Digital Spectrum Solutions, Inc. Page 36 Figure 23 – Revert Back to Internal Slideshow 11.5.1 Replace Slideshow The MemoryFrame will search the USB device for a Digital PixMaster compatible slideshow (.
Copyright © 2006 Digital Spectrum Solutions, Inc. Page 18 6.20 Portrait/Landscape Modes MemoryFrame supports both portrait (vertical) or landscape (horizontal) orientations. You can select whether th e slideshow should be configured in either Portrait or Landscape modes.
Copyright © 2006 Digital Spectrum Solutions, Inc. Page 34 11.4.6 Show This Slide Yes/No The MemoryFrame allows i mages that are stored in memory to be hidden (not shown) when the normal slideshow is presented. This allows the user to alter the slides how without deleting the image from memory.
Copyright © 2006 Digital Spectrum Solutions, Inc. Page 20 The Configuration Welcome screen appears as shown in Figure 16. Information displayed includes the current Unit Name and Serial Number.
Copyright © 2006 Digital Spectrum Solutions, Inc. Page 32 window into the MemoryFrame ’s internal memory. The middle image is the current image to select. As you navigate through the im ages, the program will render the next thumbnail, and so on until the last image is displayed.
Copyright © 2006 Digital Spectrum Solutions, Inc. Page 22 established for your network. When th e WEP Keys are set, click “OK”, and then c lick “Next” to advance to Register Your Frame, “Cancel” to abort, or “Finish” to store and exit.
Copyright © 2006 Digital Spectrum Solutions, Inc. Page 30 Select While in the Menu system, the Select button functions as the “select” key to select a thumbnail or to select and execute a text menu option.
Copyright © 2006 Digital Spectrum Solutions, Inc. Page 24 Figure 23 – Configure Photo Sharing The Summary screen notifies you of changes that have been made during the Configuration process for your review. C lick “Finish” to store and exit, or “Cancel” to abort.
Copyright © 2006 Digital Spectrum Solutions, Inc. Page 28 Important! For Memory Card Readers, make sure that the memory-card is already inserted into the card reader before connecting the USB cable to the MemoryFrame . Connect the MemoryFrame directly to the USB peripheral using the USB cable that was provided with the peripheral.
Copyright © 2006 Digital Spectrum Solutions, Inc. Page 26 9.2 Getting the Current Slideshow from the MemoryFrame From the pull-down menu of Digital Pi xMaster, select Retrieve-Slideshow to get the current slideshow from the MemoryFrame . This function is also available by clicking on “retrieve-slideshow” icon ( ) in the toolbar.
Een belangrijk punt na aankoop van elk apparaat Digital Spectrum 1862-MF-61-7 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Digital Spectrum 1862-MF-61-7 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Digital Spectrum 1862-MF-61-7 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Digital Spectrum 1862-MF-61-7 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Digital Spectrum 1862-MF-61-7 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Digital Spectrum 1862-MF-61-7 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Digital Spectrum 1862-MF-61-7 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Digital Spectrum 1862-MF-61-7 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
