Gebruiksaanwijzing /service van het product EX-7 van de fabrikant DigiTech
Ga naar pagina of 36
.
DECLARA TION OF CONFORMITY Manufacturer’s Name: DigiT ech® Manufacturer’s Address: 8760 S. Sandy Parkway Sandy , Utah 84070, U.S.A. declares that the product: Product name: EX 7 Product option: all (requires Class II power adapter that conforms to the requirements of EN60065, EN60742, or equivalent.
Congratulations and special thanks from DigiT ech ® for choosing the Expression Factory TM Pedal. When you want to expr ess emotion with your guitar , two hands ar e great, but two hands and a f oot are better .
Included Items The DigiT ech ® Expression Factor y TM Pedal includes the f ollowing items: • DigiT ech Expression F actor y P edal • PS0913B P ow er Supply • This Owner’ s Manual • DigiT ech W arranty Card • DigiT ech Brochur e Please mak e sure that all of these items ha ve been included befor e you get started.
Setup Directions Follow these setup dir ections before use: 1. T urn the volume down on the amplifier/mix er you are connecting to . 2. Connect the pedal output to the amplifier/mix er input. 3. Connect the guitar to the pedal input. 4. Connect the pow er supply to the pedal.
The Expression F actor y TM Featur es at a Glance The Expression Factory TM has seven Eff ect Models that you can select (one at a time) and control with y our foot by using the Expression P edal. Y ou can also modify each Effect Model’ s tone and behavior with thr ee knobs.
The Expression Factory TM outputs can be configured in one of four Out- put Modes: 1. Mono Mode – Outputs a mono signal through either the OUT 1 (AMP) jack or the OUT 2 (MIXER) jack. 2. Stereo Mix er Mode – Outputs a stereo signal thr ough both the OUT 1 (AMP) and OUT 2 (MIXER) jacks, suitable for connecting to a mix er or recor ding device.
1. OUT 1 (AMP)* Connect this output jack to your guitar amplifier . Refer to the Flex- ible Output Mode TM Setup sec- tion for more inf ormation. 2. OUT 2 (MIXER)* This output has been specifically tailored for use with a full range audio system and is designed to be plugged directly into a mix er or recor ding device for optimal per - formance.
4. INDICA T OR LED This LED indicates the status of the selected Model or the current Mode: OFF=bypass, GREEN=Effect Model on, RED=Effect Model and Distortion Model on, FLASHING YELLO W=Distoriton Model Select mode. 5. (Tip) - CONTROL 2 Model dependent.
9. INPUT Connect your instrument to this jack. 10. FOO TSWITCH Plug in the optional FS3X footswitch her e. Refer to the Using the Optional FS3X Foots witch section to see what the FS3X can do with the Expres- sion Factory TM . 11. EXPRESSION PED AL Serves as a variable control for each of the Effect Models.
Selecting and Enabling an Effect Model 1. Use the MODEL KNOB to select an Effect Model. (Refer to the Ef- fect Model Contr ol table for a list of Effect Models.) 2. Rock the pedal forward and pr ess firmly on the T OE SWITCH . The INDICA T OR LED lights green to show that the Effect Model is enabled.
MODEL DESCRIPTIONS MODEL 1. Dunlop ® Cry Baby TM As the W ah pedal increased in popularity , slight changes were made to the original design. One of the most popular versions of the W ah pedal was (and is) the Dunlop ® Cr y Baby TM .
MODEL 2. V ox ® Clyde McCo y TM W ah In 1966, an L.A. session guitarist and a V ox ® electrical engineer tinker ed around with an amp’ s tone cir cuit and created an ar chetype of elec- tric guitar tone: the original Clyde McCo y TM W ah pedal.
MODEL 3. DigiT ech ® XP300 Space Station TM Synth Swell TM This model recr eates the most popular tone on a rare and hard-to-find pedal. The DigiT ech ® XP300 Space Station TM Synth Swell TM packs .
MODEL 4. DigiT ech Whamm y ® Model 4 captur es the unmistakable sound of DigiT ech ® ’ s legendar y pitch- bender , the Whammy ® . Y ou can now command smooth pitch bends, rich detuning, accurate dive bombs, and fast-tracking harmony shifts, just lik e the original.
MODEL 5. Unicor d Uni-Vibe TM This is the one that set the standard for all chorus pedals. The lush Uni- cord Uni-Vibe TM chorus effect ad ds depth and dimension to your m usic that is both subtle and spectacular . No wonder the Unicor d Uni-Vibe was the choice of so many guitar gr eats when it was created in the late 60s.
MODEL 6. Leslie ® 147 Rotary Speaker Long prized by organ pla yers for their rich sound and spine-chilling effects, rotating Leslie ® speak ers caught guitarists’ attention after being masterful- ly applied b y experimenting vocalists and guitar virtuosos in the mid and late 60s.
MODEL 7. A/D A TM Flanger Model 7 recr eates the granddaddy of all flangers: the A/D A TM Flanger . This stompbox set the stage for all flangers that f ollow ed in its footsteps. Af- ficionados recognize its dramatic jet-engine flyb y sweep and a ppreciate its utter lack of background noise.
Effect Model Contr ol T able Effect Model Expression Pedal Control 1 Control 2 Control 3 1 Dunlop Cry Baby Wah Frequency Range Q (shape) Volume 2 Vox Clyde McCoy Wah Wah Frequency Range Q (shape) Volu.
Settings to Get Y ou Going T o recreate each Effect Model’ s original tone and beha vior , set Control Knobs 1-3 to the 12 o’clock position. And here ar e a few famous and familiar settings to get you started. Cry Baby ® – This setup models the stock Cry Baby ® wah tone fa vored by giants lik e Page , Slash, and Hammett.
Whamm y TM – This setup models the octa ve Whamm y TM shifting made famous by Rage Against the Machine. Set the W et/Dr y Mix (Control 3) knob to 12 o’clock to create harmon y shifting. Uni-Vibe TM – Setting the knobs to this position and rocking the Expr ession Pedal just off of the heel gets that great Gilmour “Breathe” tone.
Selecting and Activating a Distortion Model + Effect Model The Expression Factory TM has seven Distortion Models that can be selected using the MODEL knob. This is done by accessing the Distor - tion Model Select mode. Once this mode is accessed, the MODEL knob selects a Distortion Model while the rest of the knobs maintain their labeled functions.
the differ ent Distortion Models. This lets you audition diff erent Distor - tion Models with the curr ent Effect Model. Use the three ring knobs labeled DIST LEVEL , DIST T ONE , and DIST GAIN to adjust the distortion settings.
Distortion and Cabinet Models Each Distortion Model also has CIT™ cabinet modeling associated with it when using the Out 2 (Mix er) output or when the pedal is in Stereo Mix er mode (see Flexible Output Mode)*.
Flexible Output Mode TM The Expression Factory TM has four Flexible Output Modes: Mono , Stereo Mix er , Stereo Amp, and Amp/Mix er . These modes let you send a mono sig- nal to an amp or a mix er , or a stereo signal to tw o amps or two channels of a mix er , or a mono signal to an amp and a mixer sim ultaneously .
PS0913 OR AMPLIFIER MIXER FS3X FOOT SWITCH (OPTIONAL) Connections Diagram - Flexib le Output Mode 1 (Mono).
PS0913 MIXER FS3X FOOT SWITCH (OPTIONAL) Connections Diagram - Fle xible Output Mode 2 (Stereo Mix er).
PS0913 AMPLIFIER FS3X FOOT SWITCH (OPTIONAL) AMPLIFIER Connections Diagram - Flexib le Output Mode 3 (Stereo Amp).
PS0913 AND AMPLIFIER MIXER FS3X FOOT SWITCH (OPTIONAL) Connections Diagram - Fle xible Output Mode 4 (Amp + Mix er).
Flexible Output Mode TM Setup 1. Po wer up the Expr ession Factor y TM Pedal. 2. Select Model 7 using the MODEL knob. 3. Press and hold the HEEL SWITCH f or three seconds.
Calibrating the Expression P edal If the Expression P edal’ s range becomes diminished over time, it ma y be necessar y to re-calibrate the pedal. Here is the procedur e for calibration: 1. Begin with the pow er disconnected from the Expr ession Factor y TM .
Using the Optional FS3X F ootswitch The Expression Factory TM accommodates the optional FS3X 3-button footswitch. When an Effect Model or an Effect + Distortion Model is enabled, the MODE footswitch t.
FS3X F ootswitch (Optional) MODE T oggles between Effect Model only (green LED) and Effect + Distortion Model (red LED). UP Selects the next higher Model. Hold for three seconds to select MODEL 7. DOWN Selects the next lower Model. Hold for three seconds to select MODEL 1.
W ARRANTY : W e at DigiT ech ® are pr oud of our products and back up each one with the follo wing war - ranty: 1. The warranty registration card must be mailed within ten da ys after purchase date to validate this warranty . 2. DigiT ech warrants this product, when used solely within the U.
Specifications: • Controls – CONTR OL 1/DIST LEVEL, CONTR OL 2/DIST T ONE, CONTR OL 3/DIST GAIN, MODEL • Jacks – INP UT , FOO TSWITCH, OUT 1 (AMP), OUT 2 (MIXER) • Input Impedance – 1M Ohms • Output Impedance – 200 Ohms • Po wer Consumption – 4.
DigiT ech® 8760 South Sandy Parkwa y Sandy , Utah 84070 PH (801) 566-8800 F AX (801) 566-7005 www .digitech.com Manufactured in the U .S.A. Printed 12/2005 Expression Factory TM Owner’ s Manual 18-0351-A ©2005 Harman International Industries, Incorporated, all rights reser ved.
Een belangrijk punt na aankoop van elk apparaat DigiTech EX-7 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen DigiTech EX-7 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens DigiTech EX-7 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding DigiTech EX-7 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over DigiTech EX-7 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van DigiTech EX-7 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de DigiTech EX-7 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met DigiTech EX-7 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
