Gebruiksaanwijzing /service van het product DS-15xx van de fabrikant DoubleSight
Ga naar pagina of 53
USER’S MANUAL DoubleSight ™ Dual 15” LCD Monitor (Model: DS-15xx Series) For the latest updates and more information, visit our website at www.doublesight.
.
Trademarks DoubleSight, DoubleSight Displays, the DoubleSight logo, and other DoubleSight trademarks are the property of DoubleSight Displays, LLC and may be registered in the Unit ed States and/or other countries.
.
i Contents Contents ......................................................... i Notice to Users .............................................. 1 Important Safety Instructions ..................................... 1 Important Notices Regarding Power Cord .
User’s Manual ii Contents Setting Up Your Monitor ............................... 11 Connecting the Display to Base Stand ......................... 11 Connecting the Monitor to a Computer ........................ 12 Setting Up Computer Display Properties .
User’s Manual www.doublesight.com iii Display ................................................................ 31 Input Signals ....................................................... 31 Connections ..................................................
User’s Manual iv Contents (This page is left blank intentionally).
1 Notice to Users Important Safety Instructions Please carefully read the following safety instructions as they are designed to reduce the risk of electric shock, personal injury or damage to the LCD monitor. WARNING This device must be operated with the original power supply, part number: HJC HASU05F .
User’s Manual 2 Notice to Users female receptacle of the cord set must meet IEC-60320 requirements and may look like (Figure A1 below): For the United States and Canada In the United States and Canada, the male plug is a NEMA5-15 style (Figure A2), UL Listed, and CSA Labeled.
User’s Manual www.doublesight.com 3 WARNING This appliance must be grounded. IMPORTANT: The wires in the main lead are colored in accordance with the following codes: Green-and-Yellow: Grounded Blue.
User’s Manual 4 Notice to Users Additional Safety Information To prevent fire or shock hazards, do not expose this monitor to rain, moisture or liquids. Use only a properly grounded plug and receptacle. Do not use this unit’s polarized plug with an extension cord receptacle or other outlet unless the prongs can be fully inserted.
User’s Manual www.doublesight.com 5 • Do not cover or block the ventilation ports on the rear of the monitor to avoid breakdown or fire. • Do not install the monitor near heat sources, such as radiators or air ducts, or in locations exposed to direct sunlight, excessive dust, mechanical vibration or shock.
User’s Manual 6 Notice to Users (This page is left blank intentionally).
7 Introduction Congratulations on your purchase of DoubleSight, an innovative dual LCD monitor. DoubleSight is designed to harness your information and computing power utilizing unique multiple monito.
User’s Manual 8 Introduction how you want to set up each LCD display. DoubleSight’s multi- screen control technology and industrial design employ a single controlling motherboard that seamlessly manages and adjusts the display of multiple monitors.
User’s Manual www.doublesight.com 9 DoubleSight Monitor Overview Front SELECT The SELECT button is a single control function for selecting the On-Screen Display menu of left-side panel, right-side panel, or both panels.
User’s Manual 10 Introduction AUTO The AUTO button automatically adjusts the display settings. POWER The POWER button turns the monitor on and off. POWER LED Indicator A green LED indicates the monitor is on.
11 Setting Up Your Monitor Prior to setting up your DoubleSight monitor, it is important to select a location where it will be stable and protected, yet convenient to use. You will need a flat, hard surface, such as a sturdy desk or table, located near a power outlet.
User’s Manual 12 Setting Up Your Monitor Holding the base stand handle, insert its three prongs (located on the handle’s reverse side) straight down into the three holes on the display’s back silver face plate. To secure the prongs into a locked position, push the stand forward until it connects to the display securely.
User’s Manual www.doublesight.com 13 WARNING Only use the correct power cord for your local voltage. The power adapter included in the box automatically supports 100V~240V. Depending on the configuration of your computer, there are different methods for connecting it to your DoubleSight monitor.
User’s Manual 14 Setting Up Your Monitor NOTE If your computer does not specify VGA 1 and 2, you can change the order later using your computer display setting or monitor On-Screen Display setting.
User’s Manual www.doublesight.com 15 Setting Up Computer Display Properties For Microsoft Windows Users Click the Start button in Windows, then select Settings > Control Panel > Display. On the Settings tab, click the monitor icon that represents the monitor you want to extend your desktop to.
User’s Manual 16 Setting Up Your Monitor NOTE You can rearrange the position of display 1 and 2 without physically switching video adapter signal cables. Simply drag a monitor icon (1 or 2) to a desired position on the Settings tab of Display Properties Windows and select Apply or OK.
User’s Manual www.doublesight.com 17 Removing Base Stand from the Display If you need to disconnect the base stand from the display, use the bottom layer of foam packaging in the box as a secure material to protect the LCD panels.
User’s Manual 18 Setting Up Your Monitor (This page is left blank intentionally).
19 Key Function Controls DoubleSight features an intuitive, menu-driven On-Screen Display (OSD) that provides a full range of customizable tools to optimize your display. The OSD can be accessed anytime your computer is powered up. (Note: If your computer is in a power saving mode or is powered down, the OSD will be inaccessible.
User’s Manual 20 Key Function Controls 5. Press the MENU button to select a function. If more than one setting is listed, use the LEFT ◄ or RIGHT ► button to make your selection within the selected function. 6. Press the LEFT ◄ or RIGHT ► button to change the settings as described under each menu function in the following section.
User’s Manual www.doublesight.com 21 USEFUL TIP You can easily change video signal source by simply pressing the LEFT ◄ or RIGHT ► button without entering the OSD window. Just press the LEFT ◄ or RIGHT ► button anytime to switch video signal source between VGA1 and VGA2 for the corresponding panel.
User’s Manual 22 Key Function Controls Contrast 1. Press the LEFT ◄ or RIGHT ► button until the Contrast icon is highlighted. 2. Press the MENU button to select the Contrast icon. 3. Press the LEFT ◄ or RIGHT ► button to set the contrast on the 0-100 scale.
User’s Manual www.doublesight.com 23 1. Press the LEFT ◄ or RIGHT ► button until the Color icon is highlighted. 2. Press the MENU button to select the Color icon. 3. Press the LEFT ◄ or RIGHT ► button to move between the options. 4. Press the MENU button to change the setting.
User’s Manual 24 Key Function Controls 4. Press the LEFT ◄ or RIGHT ► button to select the color category. 5. Press the MENU button to select the RED, GREEN or BLUE option. 6. Press the LEFT ◄ or RIGHT ► button to set each color as desired on the 0-100 scale.
User’s Manual www.doublesight.com 25 5. Press the EXIT button to save the settings and return to the Position menu. 6. Press the EXIT button to return to the function selection menu. Image Use the image settings to adjust the sharpness, white balance, and to fine-tune picture performance to compensate for drifts in the computer signal.
User’s Manual 26 Key Function Controls Misc Menu The Misc Menu lets you access sub-menus that include Reset, Language, OSD Position, and the read-only System Information screen. 1. Press the LEFT ◄ or RIGHT ► button until the Misc Menu icon is highlighted.
User’s Manual www.doublesight.com 27 1. Press the LEFT ◄ or RIGHT ► button until Language is highlighted. 2. Press the MENU button to select Language. 3. Press the LEFT ◄ or RIGHT ► button to scroll through the languages shown. 4. Press the MENU button to select OSD language.
User’s Manual 28 Key Function Controls (This page is left blank intentionally).
29 Recommended Use Placement Correct placement and adjustment of the monitor can reduce eye, shoulder, and neck fatigue. Check the following when you position the monitor: • Keep the top of the monitor screen at or slightly below eye level. Your eyes should look slightly downward when viewing the middle of the screen.
User’s Manual 30 Recommended Use • Position the monitor at a 90° angle to windows and other light sources to minimize glare and reflections. Adjust the monitor tilt so that ceiling lights do not reflect on your screen. • Use a document holder placed close to the screen.
31 Technical Information Product Specifications (Model: DS-15xx) Display Panel Type Dual 15” TFT-LCD Viewable Area 608.2mm (24 inches) horizontal; 228.1mm (9 inches) vertical Resolution 2048 x 768 max. Colors 16M max. Brightness 250 cd/m² Contrast Ratio 400:1 Pixel Pitch 0.
User’s Manual 32 Technical Information User Controls Manual Control Buttons SELECT, MENU, ◄ , ► , EXIT, AUTO, POWER On-screen Display Functions Select Source, Brightness, Contrast, Color, Position (horizontal/vertical), Image (phase, clock), Misc.
User’s Manual www.doublesight.com 33 Application Video Timing VESA Modes Horizontal Vertical Mode Resolution Total Nominal Frequency +/- 0.5KHz Nominal Frequency +/- 1Hz Nominal Pixel Clock (MHz) DOS 720x400@70Hz 900x449 31.500 70.000 28.322 640x480@60Hz 800x525 31.
User’s Manual 34 Technical Information MAC Modes Horizontal Vertical Mode Resolution Total Nominal Frequency +/- 0.5KHz Nominal Frequency +/- 1Hz Nominal Pixel Clock (MHz) VGA 640x480@60Hz 800x525 31.469 59.940 25.175 SVGA 832x624@75Hz 1152x667 49.725 74.
35 Troubleshooting & Support Warning Messages Message Solution OUT OF RANGE The input signal is not acceptable by the monitor. - Please ensure that the video resolution and refresh rate of the graphics card in your computer are within specified ranges for the monitor.
User’s Manual 36 Troubleshooting & Support CABLE NOT CONNECTED The VGA cable is not connected to the computer. - Check that VGA cable is connected to the computer tightly. Troubleshooting Checklist Symptom Check Items Computer has only one VGA port - You need to install an additional graphics card to enable a dual monitor configuration.
User’s Manual www.doublesight.com 37 Text is not solid - Ensure that the resolution of the video signal is 1024 by 768. Lower resolution may produce distorted display due to automatic expansion of the display. - Select the corresponding panel and press the AUTO button to run automatic adjustment.
User’s Manual 38 Troubleshooting & Support will need to provide the product serial number located on the back of your monitor and proof of purchase to verify your warranty status if you have not registered your monitor within 30 days of purchase.
39 Limited Warranty INTRODUCTION This Warranty covers DoubleSight Displays, LLC’s (“DSD”) DS- 15xx DoubleSight Dual 15” LCD Monitors (“Product”) sold by DSD or DSD’s authorized resellers. DSD provides a limited warranty for the originally purchased Products for use, not resale (“Original Purchase”), located in the United States.
User’s Manual 40 Limited Warranty WARRANTY EXCLUSIONS This warranty does not cover: 1. Any Product on which the serial number has been defaced, modified or removed.
User’s Manual www.doublesight.com 41 C. Your address. D. The serial number of the product. E. A description of the problem. 3. Bring or ship the Product prepaid and insured in the original container, with the associated accessories, to the DSD depot repair site.
User’s Manual 42 Limited Warranty AUTHORIZED RESELLER FOR THIS PRODUCT HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, OR FOR ANY CLAIM BASED ON ANY THIRD PARTY CLAIM. DSD LIABILITY WILL BE NO MORE THAN THE AMOUNT YOU PAID FOR THE PRODUCT THAT IS THE SUBJECT OF A CLAIM.
43 Regulatory Information FCC Compliance This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
User’s Manual 44 Regulatory Information FCC WARNING To assure continued FCC compliance, the user must use a ground power supply cord and the provided shielded video interface cable with bonded ferrite cores. If a BNC cable is going to be used, use only a shielded BNC (5) cable.
www.doublesight.com Part No. TINSE3090D8 V3 Printed in Taiwan.
Een belangrijk punt na aankoop van elk apparaat DoubleSight DS-15xx (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen DoubleSight DS-15xx heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens DoubleSight DS-15xx vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding DoubleSight DS-15xx leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over DoubleSight DS-15xx krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van DoubleSight DS-15xx bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de DoubleSight DS-15xx kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met DoubleSight DS-15xx . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
