Gebruiksaanwijzing /service van het product AR-6024 van de fabrikant Edimax Technology
Ga naar pagina of 72
ADSL Br oadband Router AR-6024 User ’ s Manual.
T able of Content s Specification ................................................................................................................ 2 Package Contents .....................................................................................
Specification 4-Port Ethernet ADSL Router Features ADSL Compliance ANSI T1.413 i2 ITU G.992.1 (G.dmt) Annex A, B ITU G.992.2 (G.lite) Maximum downstream rate of 8Mbps Maximum upstream rate of 1Mbp.
DHCP server/client/relay agent PPP auto reconnect and configurable timeouts PPP auto reconnect on W AN access PPP Auto, P AP , and CHAP 128 character support for PPPx username/passwords DNS proxy NA T.
Hardware LAN: 4-Port 10/100Base-T (RJ-45) ADSL: One Port (RJ-1 1) Power: 9V AC 800mA LED indicators: Power , Ready (S tatus), ADSL, LAN ＊ 4 Reset button Certification: FCC Part 15/Part 68, C.
Package Content s ADSL Router CD-ROM containing Manual Ethernet Cable (CA T5 UTP S traight-Through) ADSL Cable (S tandard telephone cable) USB Cable (Optional) Power Adapter .
Hardware Connecting 4 Port Ethernet ADSL Route r S plitter (opti onal and changes depending o n country specification) Factory Reset RJ-45 Ethernet port connect Ethernet cable here Power Adapter (9V A.
LED Indicators 4 Port Ethernet ADSL Router Label Meaning S tatus Indicates PWR Power On Power is on Off Power is off RDY W AN Link Flashing Link being attempted by router . On Link established Off No link LAN 1/ LAN 2/ LAN 3/ LAN 4 LAN Link Flashing Flashes when data is being sent or received on the LAN connection.
General Setting Y ou can use the RJ 45 cable or the USB cable connect to the ADSL Router . Please see the connecting procedures as below: Move your cursor as following sequence Start Setting s Control Panel and click Control Panel .
Highlight Internet Protocol (TCP/IP) under “This connection uses the following items.” by click on it once. Click on the Properties button. Select Obtain an IP address automatically: by clicking once in the circle. Click OK button to confirm and save y our changes, and the close the Control Panel.
Launch your PC web brow ser and enter the URL: 10.0.0.2 In the User name/Password prompt, please type in admin/epicrouter as default. 10.
Now you can start browsing the web through the ADSL device. 11.
One Page Setup When working with wide area connections, the fi rst thing you must do is to have the handle of the connection. Once you have th e handle for a Connection you must define the PVC and protocol settings for it. LAN IP Address & Subnet M ask: The default is 10.
Password: Enter the password provided by your ISP . Disconnect Timeout: Disconnect T imeout means the router will disconnect after being idle for a preset amount of time. W AN T ype: Select type from the list. VC Settings VPI: If instructed to change this, type in the VPI value for the initial connection (using PVC 0).
St a t u s Router The Home page shows the Firmware V ersion and W AN and LAN interface status. Firmware V ersion: This field dis plays the Firmware V ersion number . W AN: These fields display the IP Addre ss, Subnet Mask, MAC Address for W AN interface.
LAN: These fields display the IP Address, Subnet Mask, MAC Address for LAN interface. Number of Ethernet devices connected to the DHCP server: This field displays the number of DHCP clients connec ted to the ADSL Router . It also shows the IP address and MAC address of t he attached DHCP clients.
ADSL The ADSL S tatus p age shows the ADSL physical layer status. Showtime Firmware V ersion: This field displays the ADSL dat a pump firmware version number . Line S tate: This field displays the ADSL connection process and status. Modulation: This field displays the ADSL modul ation status for G .
PPP The PPP S tatus page shows the st atus of PPP for each PPP interface. See PPP . These fields display the following information on each PPP interface: Connection Name (user defined) Interfa.
W AN Configuration: The W AN configuration page al lows the user to set the configuration W AN/ADSL ports. Per VC Settings V irtual Circuit: Selection Enable or Disable. VPI: If instructed to change this, type in the VPI value for the initial connection (using PVC 0).
Bandwidth: Bandwidth setting takes ef fect only when the CBR is s elected. The maximum available bandwidth is from t he up stream data rate of ADSL status page.
Table-1 Configuration WA N Configuration Bridge Mode Router Mode (PPPoA/PPPoE) Router Mode (Dynamic IP) Router Mode (S tatic IP) IP address N/A Automatically assigned by ISP Automatically assigned by .
PPP: The current release supports multiple PPP sessions per PVC. The PPP configuration in the W AN c onfiguration page is for the first PPP session for each PVC. The predefined PPP Account Name (A ccount ID) is “Simple PPP Account 0” for PVC0 and predefined PPP Connection Na me is “Simple PPP Session 0” for PVC0.
please leave it blank. Note: Click the Submit button to save the settings in temporary memory . If you make changes the configurations. 22.
Advanced Setting ADMINISTRA TION The links under the ADMINISTRA TION colu mn are associated to the pages that represent the configurations of system and interfaces. Note: When the configurations are changed, please click the Save Setting and Reboot button.
Per VC Settings V irtual Circuit: Selection Enable or Disable. VPI: If instructed to change this, type in the VPI value for the initial connection (using PVC 0). Default = 0 . VCI: If instructed to change this, type in the VC I value for the initial connection (using PVC 0).
End-user multicast application device send IGMP report while receiving IGMP query or being activated by user, the AD SL modem should be responsible to proxy (that is, change source IP to ADSL modem’s WAN IP) the IGMP report to ADSL WAN side, include all PVCs.
Table-1 Configuration WA N Configuration Bridge Mode Router Mode (PPPoA/PPPoE) Router Mode (Dynamic IP) Router Mode (S tatic IP) IP address N/A Automatically assigned by ISP Automatically assigned by .
PPP: The current release supports multiple PPP sessions per PVC. The PPP configuration in the W AN c onfiguration page is for the first PPP session for each PVC. The predefined PPP Account Name (A ccount ID) is “Simple PPP Account 0” for PVC0 and predefined PPP Connection Na me is “Simple PPP Session 0” for PVC0.
please leave it blank. Note: Click the Submit button to save the settings in temporary memory . If you make changes the configurations. 28.
LAN The LAN configuration page allows you to set the configuration for the LAN port. LAN IP Address & Subnet M ask: The default is 10.0.0.2 and 255.0.0.0 you can change it to another private IP addr ess, such as 21 1.22.10.191 and 255.255.255.0. For most confi gurations it is recommended to leave it as default.
DHCP Gateway Selection: The default setting for the DHCP Gateway Selection is “Automatic”. The user c an select the “User Defined” to specify “User Defined Gateway Address”. The DHCP server will iss ue the “ User Defined Gateway Address” to the LAN DHCP client.
DNS The DNS Configuration page al lows you to set the configuration of DNS proxy . Disable DNS Proxy: The LAN port does not process the DNS query message. For the DHCP requests from local PCs, the DHCP server will set the user-configured preferred DNS sever or alternate DNS serv er whichever is available as the DNS server .
NA T The NA T Configuration p age allo ws users to set the conf iguration for the Network Address T ranslation. The default setting is Dynamic NAPT . It provides dynamic Network Address T ranslation c.
Number of NA T Configurations : This field displays the total number of NA T Sessions is entered. A vailable Sessions St a tu s will be displayed at the end of this p age to show all the Session Name with its W AN Interface. Interface: This field allows the user to choose specific W AN Interface (PVC or PPP Session) for NA T Session.
Port Forwarding The Port Forwarding page allows the user def ine a port forwarding rule without using the firewall policy database definitions and apply it to the connection. Public Port: This field allows the user to enter the port number of Public Network.
ADSL Configuration The ADSL Configuration page allows user s to set the configuration for ADSL protocols. T rellis: This field allows the user to enable or di sable the T rellis Code. By default, it is always enabled. Handshake Protocol: This field allows the user to select the ADSL handshake protocol.
RIP Configuration The RIP System Wide Configurat ion page allows the user to set the configuration for each Interface (PVCs, PPP Sessions, USB and LAN). Interface: This field allows the user to choose the Interface (PVCs, PPP Sessions, USB and LAN), for the RIP to be configured.
Firewall The Firewall page allows users to configure various dat abase/firewall options and Inbound/Outbound policies for controlling Inbound/Outbound traffic. Firewall: This field allows the user to Disabled or Enabled Firewall. Note: Click the Submit button to save the settings in temporary memory .
Ping of Death checking: Ping of Death is a type of Do S attack that uses a malformed ICMP data packet that cont ains unusually large amounts of data that causes TCP/IP to crash or behave irregularly . Enabli ng this will allow the firewall to filter out packet s containing Ping of Death properties.
containing the threat. Source Routing checking: Source routing gives the sender of a packet the ability to determine the exact route that an IP packet t akes to get to the destination.
Hacker Log This page allows you to configure which Protection Policy (see previous section) violations to log for admin viewing. Alert Log: Enable/ Disable for SYN Flooding, Pi ng of Death, IP S poofing, and WinNuke (all of these are explained in the previous section).
Service Filtering Service Filtering allows you to disabl e service request from certain sources. Note: Click the Submit button to save the settings in temporary memory .
Firewall Databases: IP Group The IP Group lets you specify IP Addre sses (Single or Range) and Subnet Masks and assign them to a group name for easy use when configuring inbound and out bound policies for the firewall. IP Entry Name: This is the name you assign to t he group of IP addresses and subnet masks.
Service Group The Service Group lets you specify a Port and assign it to a group name for easy use when configuring inbound and out bound policies for the firewall. Service Entry Name: This is the name you assign to the group containing the port number .
Time W indow The T ime Window lets you specify cert ain time periods and assi gn them to a group name for easy use when configuring inb ound and outbound policies for the firewall. T ime Window Name: This is the name you assign to the group that is given the time designation.
Inbound/ Outbound Policies: Inbound Policy The Inbound Policy allows you to filter inbou nd (from the W AN into the user side LAN) packet s based on a set of rules. This enab les you to deny access from dif ferent sources and thus increase security . Src IP: This specifies the Source IP for the I nbound Policy .
affected by the policy . See Src IP above for configuration detail. Src Port: This specifies the Source Port for the Inbound Policy . This is the external (W AN side, outside of the fire wall) port(s) that will be af fect ed by the policy . In this field, there are two port entry fiel ds and a dropdown menu.
Outbound Policy The Outbound Policy allows you to filter outbound (from the us er side LAN to the W AN) packet s based on a set of rules. This enable s you to deny access to dif ferent sources and thus increase security . Src IP: This specifies the Source IP for the Ou tbound Policy .
Src Port: This specifies the Source Port for t he Outbound Policy . This is the internal (LAN side, behind firewall) port(s) that will be affected by the policy . In this field, there are two port entry fields and a dropdown menu. The dropdown menu has four options: Any Port: Selecting this will cause all Ports to be affected by the policy .
Diagnostic T est The Diagnostic T est page shows the test re sults for the physica l layer and protocol layer for both LAN and W AN sides. T esting Ethernet LAN Connect ion: This test checks the Ethernet LAN interface connection. T esting ADSL Synchronization: This test checks the ADSL showtime.
Ping Primary DNS: This test checks the primary DNS can be reached through pin request. Query DNS for www .conexant.com : This test checks the host name can be resolved to IP address though domain name servers. Ping www .conexant.com : This test checks the s pecified host can be reached through pin request.
Router T able The Router T able page displays routing t abl e and allows the user to manually enter the routing entry . The routing t able will disp lay the routing status of Destination, Netmask, Gateway and Interface. The inte rface br0 means the USB interface; Io0 means the loopback interface and ppp1 means the PPP interface.
MAC Filtering The MAC Filtering configuration page allows the user to set the configuration of IP filtering. Enable and Disable MAC filtering by selecting the “Y es” or “No” radio buttons. Source MAC: When the bridge filtering is enabled , enter the Source Mac address, Select Block and click Add.
Security The links under Security are only to be acce ssed and configured, when it is login with administrator login name and password. Admin Password The Admin Password Configuration page allo ws the user to set the p assword for administrator .
User Password The User Password Configurat ion page allows the Admin us er to set the password for the general user . When logged in as a general user you can view the basic status. User Name: user Password (default): password Note: Click the Submit button to save the settings in temporary memory .
Misc Configuration The Miscellaneous Configurat ion allows the user to set all the miscellaneous configurations. HTTP server access: This field allows the user to confi gure the Web p ages can be accessed from. ALL: When this field is checked, it allo ws both W AN and LAN access to the Web pages.
FTP server: This field allows the user to Enable or Disable the FTP connection. If you want FTP access from the W AN side you must ensure there are no port forwards for port 21. TFTP server: This field allows the user to Enable or Disable the TFTP connection.
System Log The System Log page shows the event s triggered by the system. T o clear the System Log simply click on the Clear Log button. Note: Click the Submit button to save the settings in temporary memory .
Code Update The code Update page allows the user to upload new firmware to the ADSL Router . T o upload new firmware: 1. Download the latest firmwa re image from the website. 2. Save the file to your Desktop or other location. 3. Select the Browse button and loca te the file saved in step 2.
St a t u s Router The Home page shows the Firmware V ersion and W AN and LAN interface status. Firmware V ersion: This field dis plays the Firmware V ersion number . W AN: These fields display the IP Addre ss, Subnet Mask, MAC Address for W AN interface.
number of DHCP clients connec ted to the ADSL Wireless Router . It also shows the IP address and MAC address of the attached DHCP client s. 60.
ADSL The ADSL S tatus p age shows the ADSL physical layer status. Showtime Firmware V ersion: This field displays the ADSL dat a pump firmware version number . Line S tate: This field displays the ADSL connection process and status. Modulation: This field displays the ADSL modul ation status for G .
W AN S t atus The W AN S tatus p age shows the information and status of W AN PVCs. W AN: These fields display the IP Address, Subnet Mask and MAC Address for the W AN (ADSL) interface. Use the V irtual Circu it selection to selection dif ferent PVC for status d isplay .
AT M S t a t u s The A TM S tatus page shows all the st atistics information of A TM cells. Reset Counters: This button allows user to reset the A TM S tatus counter .
TCP connections The TCP S tatus p age shows the statistics for all TCP connections. 64.
Learned MAC T able The Learned MAC T able page shows the current learned Bridge MAC table. Aging T imeout: This field allows the user to enter the update per iod for the MAC table. Note: Click the Submit button to save the settings in temporary memory .
PPP S t atus The PPP S tatus page shows the st atus of PPP for each PPP interface. See PPP . These fields display the following information on each PPP interface: Connection Name (user defined) .
Save Settings/Reboot The Save Settings/Reboot page allows users to save the new configuration to the flash and reboot the system. When the configurations are changed via the Web p ages, the settings n.
Appendix Country ISP PVC VPI:8 Australia All Internet providers VCI:35 VPI:0 Belgium VCI:33 VPI:0 Canada T elus VCI:35 VPI:8 Cybercity VCI:35 VPI:8 Danmark T iscali VCI:35 VPI:1 1 & 1 Internet DSL.
Country ISP PVC VPI:1 T iscali VCI:32 VPI:1 T -online VCI:32 VPI:1 Anderer Anbieter VCI:32 VPI:8 W annadoo VCI:35 VPI:8 France T iscali VCI:35 VPI:8 ISRAEL KPN PPPoE LLC VCI:48 VPI:8 T elecom Italia V.
Country ISP PVC VPI:8 Eresmas VCI:35 VPI:8 Jazztel VCI:35 VPI:8 Ola Internet VCI:35 VPI:0 Retevision VCI:35 VPI:8 T erra VCI:32 VPI:1 T iscali VCI:32 VPI:8 T elefornica VCI:32 VPI:8 Te l e p a c VCI:35 VPI:1 Uni2 VCI:33 VPI:8 Ya .
Country ISP PVC VPI:0 Hinet VCI:33 VPI:0 T aiwan Seednet VCI:33 VPI:8 Etisalat Classical IP Single User VCI:35 VPI:8 United Arab Emirates Etisalat Classical IP for Business VCI:35 VPI:0 United Kingdom.
Een belangrijk punt na aankoop van elk apparaat Edimax Technology AR-6024 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Edimax Technology AR-6024 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Edimax Technology AR-6024 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Edimax Technology AR-6024 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Edimax Technology AR-6024 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Edimax Technology AR-6024 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Edimax Technology AR-6024 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Edimax Technology AR-6024 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
