Gebruiksaanwijzing /service van het product LC-XBM31 van de fabrikant Eiki
Ga naar pagina of 77
Multimedia Projector MODEL LC-XBM31 Network Supported Wired LAN Refer to the Owner's Manuals below for details about network function. Network Set-up and Operation PJ Network Manag.
2 Features and Design This Multimedia Projector is designed with the most advanced technology for portability , durability , and ease of use. This projector utilizes built-in multimedia features, a palette of 16.77 million colors, and matrix liquid crystal display (LCD) technology .
3 T able of Contents T rademarks Each name of corporations or products in this book is either a registered trademark or a trademark of its respective corporation. Features and Design . . . . . . . . . . . . . . 2 T able of Contents . . . . . . . . . .
4 .
5 All the safety and operating instructions should be read before the product is operated. Read all of the instructions given here and retain them for later use.
6 Openings in the cabinet are provided for ventilation. T o ensure reliable operation of the product and to protect it from overheating, these openings must not be blocked or covered. Hot air is exhausted from the exhaust vent.
7 Compliance Federal Communications Commission Notice Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against ha rmf ul in te rf er en ce in a r es ide nt ia l i ns ta ll at io n.
8 Part Names and Functions ⑤ ⑦ ⑧ ③ ② Front Back ⑥ ① ② ③ .
9 ⑦ (MIC)- Part Names and Functions ② ③ ① ⑥ ⑤ ⑧ ④ ④ Connect the composite video output signal to this jack (p.
10 Part Names and Functions ⑦ Lights yellow when the projection lamp reaches its end of life (pp.61, 69). ⑧ – Lights red when the projector detects an abnormal condition.
1 1 T o ensure safe operation, please observe the following precautions: – Do not bend, drop or expose the remote control to moisture or heat. – For cleaning, use a soft dry cloth. Do not apply benzene, thinner , spray , or any chemical material.
12 Part Names and Functions T o ensure safe operation, please observe the following precautions : .
13 For projector positioning, see the figures below . The projector should be set perpendicularly to the plane of the screen. • The brightness in the room has a great influence on picture quality .
14 Connecting to a Computer Unplug the power cords of both the projector and external equipment from the AC outlet before connecting cables. •When the MIC function is set to in the Sound menu, the MIC function is disabled.
15 (MIC)- External Audio Equipment Audio cable (stereo) S-video cable Audio Output S-video Output Audio Input AU.
16 (MIC)- External Audio Equipment.
17 This projector uses nominal input voltages of 100-240 V AC and it automatically selects the correct input voltage. It is designed to work with single-phase power systems having a grounded neutral conductor .
18 The preparation display will disappear after 30 seconds. (See page 52 for Lamp control status.) Connect the projector ’s AC power cord into an AC outlet. The POWER indicator lights red.
19 Basic Operation PIN (Personal Identification Number) code is a security code that allows the person who knows it to operate the projector . Setting a PIN code prevents unauthorized use of the projector .
20 .
21 The projector can be adjusted or set via the On-Screen Menu. The menus have a hierarchical structure, with a main menu that is divided into submenus, which are further divided into other submenus.
22 Basic Operation Menu Bar For detailed functions of each menu, see “Menu T ree” on pages 67-68. Main Menu Sub-Menu ③ Used to select an image mode from amon.
23 Basic Operation Rotate the Zoom Ring to zoom in and out. Rotate the Focus Ring to adjust the focus of the image. If a pr.
24 Basic Operation 1 2 Press the MENU button to display the On-Screen Menu. Use the Point buttons to select Sound . Press the Point or the SELECT button to access the submenu items. Press the VOLUME+/– buttons on the top control or on the remote control to adjust the volume.
25 Basic Operation Using the remote control for some frequently used operations is advisable. Just pressing one of the buttons enables you to make the desired operation quickly without calling up the On-Screen Menu.
26 Basic Operation Press the P-TIMER button on the remote control to operate the Count up/Count down function. Refer to p.50 for detail of Setting for the P-timer function. T o stop the count time, press the P-TIMER button.
27 Choose either or by pressing the COMPUTER 1 or COMPUTER 2 button on the remote control. Before using these buttons, correct input source should be selected through Menu operation as described below .
28 .
29 Auto PC Adjustment function is provided to automatically adjust , , and V ertical positions to conform to your computer .
30 PC adjust Menu Some computers employ special signal formats which may not be tuned by Multi-scan system of this projector .
31 Store T o store the adjusted data, select Store and then press .
32 .
33 Press the MENU button to display th.
34 This projector has the picture screen resize function, which enables you to customize the image size. Screen Menu Provide the image to fit the screen size.
35 Select . The On-Screen Menu disappears and appears. Press the SELECT button to expand the image size. Use the buttons to pan the image.
36 Choose Video or S-video by pressing the VIDEO or the S-VIDEO button on the remote control. Before using these buttons, correct input source should be selected through menu operation as described below .
37 Choose or by pressing the COMPONENT or the COMPUTER 1 button on the remote control.
38 1 .
39 .
40 1 2 Press the Point button to decrease the contrast; press the Point button to increase the contrast (from 0 to 63). Press the Point button to decrease the brightness; press the Point button to increase the brightness (from 0 to 63).
41 An interlaced video signal can be displayed in progressive mode. Select one of the following options. ......... Disabled. L 1 ......... For an active picture.
42 This projector has the picture screen resize function, which enables you to customize the image size. Normal Screen Menu 1 2 Provide the image to fit the screen size while maintaining the aspect ratio of the input signal.
43 This function is used to adjust keystone distortion of the projected image. Use the Point buttons to choose the item you want to adjust. T o correct keystone distortion, press the SELECT button.
44 Setting Setting Setting Menu Press the MENU button to display the On-Screen Menu. Press the Point buttons to select Setting and press the Point or the SELECT button to access the submenu items. 1 2 Use the Point buttons to select the desired item and then press the Point or the SELECT button to access the selected item.
45 • Du ring i s in pro gre ss, If the ME NU button or the ON/ST AND-BY button is pressed, will stop.
46 Setting This function decides whether to display On-Screen Displays. On ............................ Show all the On-Screen displays. Use this function when you want to project images after the lamp becomes bright enough. The factory default setting is in this option.
47 Setting Capture Capture This function enables you to capture an image being projected to use it for a starting-up display or interval of presentations. Select Capture and press the SELECT button. A confirmation box appears and select to capture the projected image.
48 Use the Point buttons to enter a number . Press the Point buttons to fix the number and move the red frame pointer to the next box.
49 The COMPUTER IN 2/MONITOR OUT terminal on the back of the projector is switchable for computer input or monitor output. (See page 9) Select Computer 2 or Monitor Out with the Point buttons. Computer 2 . . computer input Monitor Out .
50 This function is available when operating the projector via network. Network .... Supply the power to the network function even after turning off the projector by pressing the ON/ST AND-BY button on the remote control.
51 Closed Caption Closed Caption Closed Caption is a function that displays the audio portion of a TV program as text on the screen. If the input signal contains closed captions, you can turn on the feature and switch the channels.
52 This projector provides two different remote control codes: the factory-set initial code ( Code 1 ) and the secondary code ( Code 2 ). This switching function prevents remote control interference when operating several projectors or video equipment at the same time.
53 Setting This function locks the top control and remote control buttons to prevent operation by unauthorized persons.
54 Use the Point buttons to select , On 1 or On 2 , and then press the SELECT button to make a choice. Use the Point buttons to enter a number .
55 Setting This function provides the following options in the cooling fans’ operation when the projector is turned off (p.20). L 1 ..... Normal operation L 2 .
56 This function returns all setting values except for the , , , Lamp counter and Filter counter to the factory default settings.
57 Setting The Information Menu is used for checking the status of the image signal being projected and the operation of the projector .
58 Maintenance and Cleaning The W ARNING indicator shows the state of the function which protects the projector. Check the state of the W ARNING indicator and the POWER indicator to take proper maintenance.
59 Maintenance and Cleaning Filter prevents dust from accumulating on the optical elements inside the projector . Should the Filter become clogged with dust particles, it will reduce cooling fans’ ef fectiveness and may result in internal heat buildup and adversely affect the life of the projector .
60 Maintenance and Cleaning Unplug the AC power cord before cleaning.
61 Maintenance and Cleaning When the projection lamp of the projector reaches its end of life, the Lamp replacement icon appears on the screen and LAMP REPLACE indicator lights yellow . Replace the lamp with a new one promptly . The timing when the LAMP REPLACE indicator should light is depending on the lamp mode.
62 Maintenance and Cleaning This projector uses a high-pressure lamp which must be handled carefully and properly . Improper handling may result in accidents, injury , or create a fire hazard.
63 – Solutions No power – Plug the power cord of the projector into the AC outlet. – See if the POWER indicator lights red. – W ait until the POWER indicator stops blinking to turn on the projector again.
64 No image – Check the connection between your computer or video equipment and the projector . See pages 14-16. – See if the input signal is correctly output from your computer . Some laptop computers may need to change the setting for monitor output when connecting to a projector .
65 – Check PC adjust menu or Screen menu and adjust them. See pages 30-31, 34-35. – PIN code lock is being set.
66 .
67 V olume Mute On/Off Sound 0-63 RGB Component S-video RGB RGB (Sc.
68 Auto P AL SECAM NTSC NTSC 4.43 P AL-M P AL-N Auto 1080i 1035i 720p 575p 480p 575i 480i 0–63 0–63 Off (2) (3) .
69 Check the indicators for projector condition. • • • green. • • • red • • • off • • • blinks green. When the projection lamp reaches its end of life, the LAMP REPLACE indicator lights yellow . When this indicator lights yellow , replace the projection lamp with a new one promptly .
70 Basically this projector can accept the signal from all computers with the V -, H-Frequency mentioned below and less than 140 MHz of Dot Clock. When selecting these modes, PC adjustment can be limited.
71 Projector T ype Multi-media Projector Dimensions (W x H x D) 13.13" x 3.98" x 9.
72 Model No. .
73 This projector is compliant with PJLink Standard Class 1 of JBMIA (Japan Business Machine and Information System Industries Association). This projector supports all commands defined by PJLink Class 1 and is verified conformance with PJLink Standard Class 1.
74 .
75 Write down the PIN code number in the column below and keep it with this manual securely . If you forgot or lost the number and unable to operate the projector , contact the service center .
76 Dimensions Unit: mm(inch) Screw Holes for Ceiling Mount Screw: M4 Depth: 12.0(0.47) 79.6(3.13) 46.2(1.82) 3.7(0.15) 17.1(0.67) 33.6(1.32) 35.9(1.41) 85.4(3.36) 83.8(3.30) 10.0˚ 247.0(9.72) 4.6(0.18) 80.2(3.16) 138.0(5.43) 122.2(4.81) 1 14.0(4.49) 137.
KT8BE U.S.A. EIKI International, Inc. 30251 Esperanza Rancho Santa Margarita CA 92688-2132 U.S.A. Tel : 800-242-3454 (949)-457-0200 Fax : 800-45 7-3454 (949)-457-7878 E-Mail : usa@eiki.com Deutschland & Österreich EIKI Deutschland GmbH Am Frauwald 12 65510 Idstein Deutschland Tel : 06126-9371-0 Fax : 06126- 9371-14 E-Mail : info@eiki.
Een belangrijk punt na aankoop van elk apparaat Eiki LC-XBM31 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Eiki LC-XBM31 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Eiki LC-XBM31 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Eiki LC-XBM31 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Eiki LC-XBM31 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Eiki LC-XBM31 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Eiki LC-XBM31 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Eiki LC-XBM31 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
