Gebruiksaanwijzing /service van het product PA92 van de fabrikant Alamo
Ga naar pagina of 160
©2009 Alamo Group Inc. $0.00 Published 03/09 Part No. 7192859C OPERA T OR’S MANUAL ALAMO INDUSTRIAL ® 1502 E. W alnut Seguin, T exas 78155 830-372-3551 Email: part s@alamo-industrial.
T o the Owner/Operator/Dealer All implements with moving p arts are potentially hazardous . There is no substitute for a cautious, safe-minded operator who recognizes the poten tial hazards and follows reasonable safe ty practices.
In order to reduce accidents and enha nce the safe operation of mowers, Alamo Industrial, in cooperation with other industry manufacturers has developed the AEM/FEMA I ndustrial and Agri cultural Mower Safety Practices video and guide book.
Alamo Industrial Division is willing to provide one (1) AEM Mower Safety Practices V ideo Please Send Me: VHS Format – AEM/FEMA Mower Operator Safety V ideo DVD Format – AEM/FEMA Mower Operator Sa.
T ABLE OF CONTENTS SAFETY SECTION ........ ................................................. .......................................... ........... 1- 1 General Safety Instructions and Practic es ... ................ ................ .................
Tractor Safety Devices .............. ................ ................ ................ ................ ................ .......... ............. ............. ..... 4-7 Tractor Horsepower .. ................ ............. ................ .........
LUBRICATION .......... ................ ............. ................ ................ ................ ................ ............ .............. ................ .. 5-2 HYDRAULIC SYSTEM ......... ................. ................................
.
Safety Section 1-1 © 2008 Alamo Group Inc. SAFETY SECTION.
SAFETY PA92 04/09 Safety Section 1-2 © 2009 Alamo Group In c. SAFETY General Safety Instruct ions and Practices A careful operator is the best opera tor .
SAFETY PA92 04/09 Safety Section 1-3 © 2009 Alamo Group In c. SAFETY Operator Safety Instr uctions and Practices Battery posts, ter minals and related accessories cont ain lead and lead compounds, chemicals known to the state of California to cause cancer , birth defects or other reproductive har m.
SAFETY PA92 04/09 Safety Section 1-4 © 2009 Alamo Group In c. SAFETY Al ways rea d care f u ll y an d comp l y f u ll y w ith th e manu f ac t urer ’ s instructions when handling oil, solvents, cleansers, and any other chemical agent. (SG-22) KEEP A W A Y FROM ROT A TING ELEMEN TS to prevent entanglement and possible serious injury or death.
SAFETY PA92 04/09 Safety Section 1-5 © 2009 Alamo Group In c. SAFETY Equipment Operation Safety Instructions and Practices DO NOT operate this Implement o n a Tra ctor that is not properly maint ained.
SAFETY PA92 04/09 Safety Section 1-6 © 2009 Alamo Group In c. SAFETY B e sure you h ave a d equa t e k now l e d ge o f th e proper t y you w ill b e wor ki ng on. T a k e ti me t o make yourself aware of any area und erground lines or cables. Cont act with buried lines o r cable could result in serious injury or death .
SAFETY PA92 04/09 Safety Section 1-7 © 2009 Alamo Group In c. SAFETY S tart tractor only when properly seated in th e Tractor seat. S tarting a tractor in gear can resu lt in injury or death. Read the T ractor operators manual for prop er starting instructions .
SAFETY PA92 04/09 Safety Section 1-8 © 2009 Alamo Group In c. SAFETY Do Not operate this eq uipment in areas where insect s such as bees may attack you and/or cause you to lose contro l of the equip ment. If you must enter in such areas, use a tractor with an enclosed Cab and close the windows to pr event insect s from entering.
SAFETY PA92 04/09 Safety Section 1-9 © 2009 Alamo Group In c. SAFETY M ow at t h e spee d t h at you can sa f e l y operate an d contro l t h e tractor an d mower . Th e correct mowing spee d depends on terrain cond itio n and grass type, density , and height of cut.
SAFETY PA92 04/09 Safety Section 1- 10 © 2009 Alamo Group In c. SAFETY Use extreme caution when raisin g the Mower above ground level. S top the Blades from turning when the Mowe r is raised and passers by are within 100 yards.
SAFETY PA92 04/09 Safety Section 1-11 © 2009 Alamo Group In c. SAFETY Connecting or Di sconnecting Implement Safety Instructions and Prac- tices DO NOT use a PTO adapter to attach a non-matching Implement driveline to a T ractor PTO.
SAFETY PA92 04/09 Safety Section 1- 12 © 2009 Alamo Group In c. SAFETY T ransporting Safety Inst ructions and Practices Be particularly ca reful when transporting the Im plement with the T ractor . T urn curves or go up hills only at a low speed and using a grad ual steering angle.
SAFETY PA92 04/09 Safety Section 1-13 © 2009 Alamo Group In c. SAFETY Maintenance and Service Safet y Instructions and Practices T ransport only at speeds where you can maint ain control of the equipment. Seriou s accidents and injuries can result from operating this equipment at high speeds.
SAFETY PA92 04/09 Safety Section 1- 14 © 2009 Alamo Group In c. SAFETY Relieve hydraulic pr essure prior to doing any maintenance or rep air work on the Implement. Place the Implement on the ground or se curely blocked up, disengage the PTO, and turn of f the tractor eng ine.
SAFETY PA92 04/09 Safety Section 1-15 © 2009 Alamo Group In c. SAFETY Perform service, rep airs and lubrication accord ing to the maintenance section. Ensure the unit is properly lubr icated as specified in the lubrication schedule and all bolts and nut s are properly torq ued.
SAFETY PA92 04/09 Safety Section 1- 16 © 2009 Alamo Group In c. SAFETY Concluding Safety In structions and Practices I n addition to the design and co nfiguration of this Impl ement, including Sa fet.
SAFETY PA92 04/09 Safety Section 1-17 © 2009 Alamo Group In c. SAFETY Decal Location NOTE: Alamo Industrial supplies safety decals on this product to promote safe operation.
SAFETY PA92 04/09 Safety Section 1- 18 © 2009 Alamo Group In c. SAFETY ITEM P ART NO. QTY LEVEL DESCRIPTION 1. 002369 1 DANGER Multiple Haza rd Flail 2. 02958241 1 DANGER Multiple Haza rd Boom 3. 02965262 1 DANGER Oil Leak/Pene tration 4. 02965100 1 INSTRUCT Use Genuin e Alamo Industrial Parts 5.
SAFETY PA92 04/09 Safety Section 1-19 © 2009 Alamo Group In c. SAFETY Decal Description Danger! Mult-Hazard W arning. Failing to follow these Safety Messages an d Operating Instructions can cause serious bo dily injury or even death to operator and others in th e area.
SAFETY PA92 04/09 Safety Section 1- 20 © 2009 Alamo Group In c. SAFETY DANGER! - Multi-Hazard Boom. T ake precautions while transporting and oper ating Boom Unit.
SAFETY PA92 04/09 Safety Section 1-21 © 2009 Alamo Group In c. SAFETY DANGER! Crushing and Pinch Point s. Moving machiney p arts can pinch or cru sh or fall- which may cause injury or death. P/N 02962765 INFORMA TIO N - T o prevent prem ature hydra ulic component failure, do not over speed the engine.
SAFETY PA92 04/09 Safety Section 1- 22 © 2009 Alamo Group In c. SAFETY W ARNING: Press urized T ank 03200437 DANGER! Keep Away Thrown Object s. Inspect the area before m owing for potential mower hazards. Remove or avoid all foreign objects such as wire, cable, met al objects, and all other foreign material.
SAFETY PA92 04/09 Safety Section 1-23 © 2009 Alamo Group In c. SAFETY W ARNING! Keep all safe ty shielding installed, repaire d and replaced when damaged so that machine stays in safe condition. P/N 00756007 DANGER! Keep Away - Rot ating Blades P/N 00756485 DANGER! Make certain that drivelin es are correct length and are se curely attached.
SAFETY PA92 04/09 Safety Section 1- 24 © 2009 Alamo Group In c. SAFETY Information that Grease Fitting is pre sent and must apply grease. P/N 000678 Instructions to properly lubricate and check mower for potential problems pr ior to operation. P/N 000108 INFORMA TION - Attention - Service Hydraulic System with Universal Tr acto r Hydraulic Oil.
SAFETY PA92 04/09 Safety Section 1-25 © 2009 Alamo Group In c. SAFETY W ARNING! Avoid Bodily Injury , Use 540RPM PTO S peed Only . P/N D103 Slow Moving V ehicle Decal. Keep SMV reflector clean and visible. DO NOT transport or operate without the SM V .
SAFETY PA92 04/09 Safety Section 1- 26 © 2009 Alamo Group In c. SAFETY PELIGRO! S panish T ranslati on for Driveline Safety P/N 00773723 ALAMO INDUSTRIAL LOGO P/N 001651 ALAMO NAME LOGO. P/N 001650 Read Operato r ’s Manual! The operator’s manual is located inside this canister .
SAFETY PA92 04/09 Safety Section 1-27 © 2009 Alamo Group In c. SAFETY Federal Laws and Regulations This section is intend ed to explain in broa d terms the concep t and effect of federal laws and reg ulations concerning emplo yer and employee equipment o perat ors.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
Introduction Section 2-1 © 2009 Alamo Group Inc. INTRODUCTION SECTION.
INTRODUCTION PA92 04/09 Introduction Section 2-2 © 2009 Alamo Group Inc. INTRODUCTION Made for use with smaller tractors in the 35 HP range, the rear mounted P A92 is your first choice when yo u have the need to get in those hard to reach ar eas such as ditches and culverts to take care of light duty vegetation.
INTRODUCTION PA92 04/09 Introduction Section 2-3 © 2009 Alamo Group Inc. INTRODUCTION These hydraulically driven mowe rs are designed for light -duty work.
INTRODUCTION PA92 04/09 Introduction Section 2-4 © 2009 Alamo Group Inc. INTRODUCTION A TTENTION OWNER/ OPERA TOR BEFORE OPERA TING THIS MACHINE: 1. Carefully read the Operator’s Manual, completely underst and the Safety Messages and instructions, an d know how to operate correctly both the Mower an d Power Unit.
Assembly Section 3-1 © 2009 Alamo Group In c. ASSEMBL Y SECTION.
ASSEMBLY PA92 04/09 Assembly Section 3-2 © 2009 Alamo Group Inc. ASSEMBL Y TRACTOR SELECTION Linkage Requirement s The Power Arm 92 fit almost any tractor with a Category II linkage.
ASSEMBLY PA92 04/09 Assem bly Section 3-3 © 2009 Alamo Group In c. ASSEMBL Y TRACTOR PREP ARA TION Fitting Operator Guard A tractor fitted with a cab that has a safety glass windo ws should b e used whenever possible. This is a basic safety precaution applicable to the use of all flail-type hedge trimmer s.
ASSEMBLY PA92 04/09 Assembly Section 3-4 © 2009 Alamo Group Inc. ASSEMBL Y Wheel Wid th Set wheel widths as wide as possible. Ballast Weig ht T ractor must be st able while operating the hedge cutter s under all conditions. Pay at tention when operating on slopes.
ASSEMBLY PA92 04/09 Assem bly Section 3-5 © 2009 Alamo Group In c. ASSEMBL Y DELIVER Y 1. The machine is delivered in a partially dismantled condition. T o make re ady for att achment to the tractor it will be necessary to select a hard level surface 2.
ASSEMBLY PA92 04/09 Assembly Section 3-6 © 2009 Alamo Group Inc. ASSEMBL Y *Measure the PTO drive shaf t length as shown in diagram below and subtract 1 inch (2 5 mm.
ASSEMBLY PA92 04/09 Assem bly Section 3-7 © 2009 Alamo Group In c. ASSEMBL Y 16. Remove the par king feet, turn inward 90 degrees and relocate in their housings.
ASSEMBLY PA92 04/09 Assembly Section 3-8 © 2009 Alamo Group Inc. ASSEMBL Y FITTING CONTROL UNIT IN CAB The 3 lever control unit which is c abl e oper ated is mounted on an adjust abl e stalk that is att ached to a seat bracket which is of univer sal design for mounting in many models of tractor .
ASSEMBLY PA92 04/09 Assem bly Section 3-9 © 2009 Alamo Group In c. ASSEMBL Y OIL REQUIREMENTS Ta n k The machine is delivered fro m the factory without o il. Fill the reservoir wit h a light hydr aulic oil as recommended in the chart until the oil level is approximat ely 2” below the top of the tank.
ASSEMBLY PA92 04/09 Assembly Section 3-10 © 2009 Alamo Group Inc. ASSEMBL Y RUNNING UP PROCEDURE PA 9 2 T i 1. Ensure that th e rotor con trol is in “STOP” positi on, start the tractor , engage PTO and allow the oil to circulate for about 5 min utes before operating the arms.
ASSEMBLY PA92 04/09 Assembly Section 3-11 © 2009 Alamo Group In c. ASSEMBL Y REMOV AL FROM TRACTOR 1. Select a firm level site for parking the machine. 2. Remove the parking feet, turn through 90 de grees and relocate in their housings. 3. Unscrew the lift ram tap and with the machine at appr oximatel y half reach in normal working position, i.
.
Operation Sectio n 4-1 © 2009 Alamo Group In c. OPERA TION SECTION.
OPERATION PA92 04/09 Operation Section 4 -2 © 2009 Alamo Group Inc. OPERA TION ALAMO INDUSTRIAL POWER ARM 92 OPERATING INSTRUCTIONS Alamo Industrial flail mowers are m anufactured with quality material by s killed workers. These mowers are designed for cutting gra ss and small weeds.
OPERATION PA92 04/09 Operation Section 4 -3 © 2009 Alamo Group Inc. OPERA TION 1. St andard Equipment and Specifications St andard Specifications Hitch CA T I or CA T II Three Point Boom reach 14’ .
OPERATION PA92 04/09 Operation Section 4 -4 © 2009 Alamo Group Inc. OPERA TION 2.OPERA T OR REQUIREMENTS Safe operation of the unit is the responsibility of a qual ified operator .
OPERATION PA92 04/09 Operation Section 4 -5 © 2009 Alamo Group Inc. OPERA TION 3. TRACT OR REQUIREMENTS In addition to tractor ho rsepower and size required to operate the mower unit, the tra ctor mu.
OPERATION PA92 04/09 Operation Section 4 -6 © 2009 Alamo Group Inc. OPERA TION Never opera te the Tr actor and Mowe r Unit with out an OPS (Operators Protective S tructure) or Cab to prevent injury from object s thrown from ground or from overhead tr imming.
OPERATION PA92 04/09 Operation Section 4 -7 © 2009 Alamo Group Inc. OPERA TION 3.4 T ractor Ballast T o ensure tractor s tability when operat ing on flat surfaces the left rear tractor tire MUST exert a minimum down force (weight) of 1500 lbs.
OPERATION PA92 04/09 Operation Section 4 -8 © 2009 Alamo Group Inc. OPERA TION 3.6 T ractor Horsepower The horsepower r equired to operate the mower depends on many factors including veget ation to be cut, terrain condition, operator experie nce, and condition of the mower and tractor .
OPERATION PA92 04/09 Operation Section 4 -9 © 2009 Alamo Group Inc. OPERA TION 3.8 Hydraulics The P A91 is ava ilable with either a Semi or T otally Independe nt hydraulic syst em complete wit h rotor rotation control.
OPERATION PA92 04/09 Operation Section 4-10 © 2009 Alamo Group Inc. OPERA TION Do not mount or di smount the T ractor while the tractor is moving. Mo unt the T ractor only when the T ractor and all moving part s are completely stopped.
OPERATION PA92 04/09 Operation Section 4-11 © 2009 Alamo Group Inc. OPERA TION 5. ST ARTING THE TRACTOR The operat or must have a complete und erstanding of the p lacement, fun ction, and op erational us e of all tractor cont rols before starting the tractor .
OPERATION PA92 04/09 Operation Section 4-12 © 2009 Alamo Group Inc. OPERA TION 6. Connecting Att ach ing He ad to the Boo m 1. S tart by using a hoist to lower the bo om(1) down to the mower he ad (6).
OPERATION PA92 04/09 Operation Section 4-13 © 2009 Alamo Group Inc. OPERA TION Always shut the T ractor completely down, place th e transmission in park, an d set the parking brake before you or anyone else attemp t s to connect or disco nnect the Implement and T racto r hitches.
OPERATION PA92 04/09 Operation Section 4-14 © 2009 Alamo Group Inc. OPERA TION 7. PRE-OPERA TION INSPECTION AND SER VICE Before each use, a pre-ope ration inspection and service of the imple ment and tractor must be performed.
OPERATION PA92 04/09 Operation Section 4-15 © 2009 Alamo Group Inc. OPERA TION 7.2 Boom Unit Pre-Operati on Inspection and Service Inspect and service the boom arm and head prior to operation. Damaged and/or broken part s should be repaired and/or replaced immediately .
OPERATION PA92 04/09 Operation Section 4-16 © 2009 Alamo Group Inc. OPERA TION FRAME ASSEMBL Y • Inspect condition of mounting frame weld ment. • Inspect condition of King Post frame. • Ensure all bolt s and screws are in position and are properly to rqued.
OPERATION PA92 04/09 Operation Section 4-17 © 2009 Alamo Group Inc. OPERA TION Relieve hydraulic pressure prio r to doing any maintenance or re pair work on the Implement. Place the Mower Head on the ground or secure ly supported on blocks or st ands, disengage the PTO, and turn off the engine.
OPERATION PA92 04/09 Operation Section 4-18 © 2009 Alamo Group Inc. OPERA TION Attention: Oil Filler Cap is also the Pressure Relief Cap. Remove cap slowly to relieve pressure before removing cap completely .
OPERATION PA92 04/09 Operation Section 4-19 © 2009 Alamo Group Inc. OPERA TION T ractor PRE-OPERA TION Inspection Mower ID# ________________ Make ____________________ Date: ________________ Shift ___.
OPERATION PA92 04/09 Operation Section 4-20 © 2009 Alamo Group Inc. OPERA TION Boom Mower PRE-OP ERA TION Inspection Mower ID#________________ Make ____________________ Date: ________________ Shift _.
OPERATION PA92 04/09 Operation Section 4-21 © 2009 Alamo Group Inc. OPERA TION 8. OPERA TING THE BOOM MOWER 8.1 Machine Controls Moving the Arm control le vers away from the cables will result in “LIft Down”, “Angle Down” and “Reach Out”.
OPERATION PA92 04/09 Operation Section 4-22 © 2009 Alamo Group Inc. OPERA TION 8.2 Arm Controls.
OPERATION PA92 04/09 Operation Section 4-23 © 2009 Alamo Group Inc. OPERA TION 8.3 Rotor Controls (T i Only) ROTOR ON/OFF- Si Only Rotor On/Of f is controlled by operation of the tractor ’s PT O lever . T o S tart Rotor: • Bring tractor engine revs up to 100 0 rpm.
OPERATION PA92 04/09 Operation Section 4-24 © 2009 Alamo Group Inc. OPERA TION 8.4 Engaging Drive Fully Independent Model 1. Ensure that the rotor control lever is move d to the “STOP” position before en gaging the PTO shaf t. 2. Allow the oil to circulate for a minute or so before operating the armhead levers.
OPERATION PA92 04/09 Operation Section 4-25 © 2009 Alamo Group Inc. OPERA TION 8.6 Forward Speed T ractor ground speed is deter mined by common sense and experience. It should be slow enough to allow sufficient time for the flails to cut the work without o verloading.
OPERATION PA92 04/09 Operation Section 4-26 © 2009 Alamo Group Inc. OPERA TION 8.10 Breakaway Action When the flail head meet s an obstruction and the tractor continues to move forward, the complete armhea d which is hinged on the frame w ill be forced backwards and upwards at the same time in an effort to clear the obstruction.
OPERATION PA92 04/09 Operation Section 4-27 © 2009 Alamo Group Inc. OPERA TION 8.13 High V oltage Cables 8.14 Hedge Cutting Procedure Upward Cutting The flail head is assembled at the facto ry for the flails to cut with an upward motion.
OPERATION PA92 04/09 Operation Section 4-28 © 2009 Alamo Group Inc. OPERA TION For Downward Cutting For downward cutting, a rear hood kit Part No. 71-90-310 must be fitted. The front hood may be removed to allow lon ger material to be cut. If this is done, the rotor should ne ver be reversed to cut upwards ev en momentarily .
OPERATION PA92 04/09 Operation Section 4-29 © 2009 Alamo Group Inc. OPERA TION Cutting Sequence Operator prefer ence will ultimately decide on the or der of cutting.
OPERATION PA92 04/09 Operation Section 4-30 © 2009 Alamo Group Inc. OPERA TION NOTE: Flails are more prone to accidental dam age and bl unting by stones on a grou nd cut. Therefore, when convenient , this should be left until the end. Where the hedge has been well maintained in the past, it may be found better to cut the top be fore siding up.
OPERATION PA92 04/09 Operation Section 4-31 © 2009 Alamo Group Inc. OPERA TION 8.16 Grass Cutting Flails must cut upwards. Front hood CW flap s, skids and rear flap must be fitted. The mounting holes a llow two positions for the front hood and two positions for the skids.
OPERATION PA92 04/09 Operation Section 4-32 © 2009 Alamo Group Inc. OPERA TION 9 . DRIVING THE TRACT OR AND IMPLEMENT Safe tractor transport r equires the operator to po ssess a thorou gh knowledge of the model being operated and precaution s to take while driving with an at tached implement.
OPERATION PA92 04/09 Operation Section 4-33 © 2009 Alamo Group Inc. OPERA TION T ransport only at speeds where you can maint ain control of the equipment. Seriou s accidents and injuries can result from operating this equipment at high speeds. Understand the Tra ctor and Implement and how it hand les before transporting on street s and highways.
OPERATION PA92 04/09 Operation Section 4-34 © 2009 Alamo Group Inc. OPERA TION 9.2 Brake and Differen tial Lock Setting Make sure the tracto r brakes are in good operating conditio n. Tractor br akes can be set to operate independ ently allowing single rear wheel braking action or locked to gether to provide simultaneo us rear wheel braking.
OPERATION PA92 04/09 Operation Section 4-35 © 2009 Alamo Group Inc. OPERA TION 9.4 Moving from the T ransport to the Work Position T o revert back to the working position, it is only necessary to place the flail head firmly on th e ground. Drive the tractor forward sufficiently to take the weight off the breakaway bar .
OPERATION PA92 04/09 Operation Section 4-36 © 2009 Alamo Group Inc. OPERA TION 9.5 Driving the T ractor and Boom S tart off driving at a slo w speed and gradually increase your speed while maintainin g complete contr ol of the tractor .
OPERATION PA92 04/09 Operation Section 4-37 © 2009 Alamo Group Inc. OPERA TION 1 1. OPERA TING INSTRUCTIONS 1. Engage the PT O shaft at low engine RPM and spee d the engine up after b lades are fully engaged. Never engage the PT O shaft at a high en gine RPM.
OPERATION PA92 04/09 Operation Section 4-38 © 2009 Alamo Group Inc. OPERA TION Extremely tall grass should be cut twice. Raise mower and cut twice the desir ed height. Cut the second time at desired height at 9 0 degrees to first pass. Remember , sharp blades produce cleaner cut s and use less power .
OPERATION PA92 04/09 Operation Section 4-39 © 2009 Alamo Group Inc. OPERA TION 1 1.1 Foreign Debris Hazards Before mowing, in spect the area to make sure there are no foreign obje cts that the mower blades could hit or b ecome entangled with. Remove all foreign objects and debris.
OPERATION PA92 04/09 Operation Section 4-40 © 2009 Alamo Group Inc. OPERA TION Rotary Mowers are capable un der adverse conditions of throwing objects for great distances (30 0 feet or more) and causing serio us injury or death. Follow safety messages carefu lly .
OPERATION PA92 04/09 Operation Section 4-41 © 2009 Alamo Group Inc. OPERA TION 1 1.4 Operating Speed and Ground S peed Ground speed for mowing will depend upon the height, type, and density of veget ation to be cut. Do Not exceed 2 MPH while op erating.
OPERATION PA92 04/09 Operation Section 4-42 © 2009 Alamo Group Inc. OPERA TION There are obvio us and hidden potential hazards in the operation of this Mower . REMEMBER! This machine is often operated in he avy brush and in heavy weeds. The Bla des of this Mower ca n throw objects if shields are not pro perly installed and maint ained.
OPERATION PA92 04/09 Operation Section 4-43 © 2009 Alamo Group Inc. OPERA TION 1 1.6 Operating the Att ached Mower Heads Refer to the Assembly Sectio n of this manual to ensure the h ead is properly attach ed to the boom hitch and hydraulic line s are proper ly connected .
OPERATION PA92 04/09 Operation Section 4-44 © 2009 Alamo Group Inc. OPERA TION 12. TRACT OR, BOOM, AND A TT ACHED HEAD STORAGE Properly prep aring and storing the unit at the end of th e season is critical to maintaining its appea rance and to help ensure years of depend able service.
OPERATION PA92 04/09 Operation Section 4-45 © 2009 Alamo Group Inc. OPERA TION • Thoroughly clean all debris from boom and head to pr event dam age from rot ting grass and standing water . • Lubricate all grease points and fill oil levels according to the main tenance lubrication schedule.
OPERATION PA92 04/09 Operation Section 4-46 © 2009 Alamo Group Inc. OPERA TION NOTE: Ensure that the mo wer sections are fully raised and that the transp ort locks are engaged for e ach section.
OPERATION PA92 04/09 Operation Section 4-47 © 2009 Alamo Group Inc. OPERA TION O n l y t ow th e I mp l emen t b e hi n d a proper l y s i ze d an d equ i ppe d T rac t or which exceeds the weight of the Impl ement by at least 20%. DO NOT tow the Imp lement behin d a truck or ot her type of ve hicle.
OPERATION PA92 04/09 Operation Section 4-48 © 2009 Alamo Group Inc. OPERA TION When operating on public roads, have consideration for other road u sers. Pull to the side of the road occasionally to allow all following traffic to pass. Do not exceed the lega l speed limit set in your country for agricultural tra ctors.
OPERATION PA92 04/09 Operation Section 4-49 © 2009 Alamo Group Inc. OPERA TION 14.2 Hauling the T ractor and Implement Before transporting a loade d tractor and implement, measure the height and width dimensions and gro ss weight of the complete loaded unit.
OPERATION PA92 04/09 Operation Section 4-50 © 2009 Alamo Group Inc. OPERA TION 15. TROUBLESHOOTING GUIDE TROUBLE POSSIBLE CAUSE POSSIBLE REMEDY Hydraulic Cylinder Hydraulic level low . Check hydraulic fluid level. Not Working (See sight gauge on tan k) Pump not functioning Attempt to use another cylinder or properly .
OPERATION PA92 04/09 Operation Section 4-51 © 2009 Alamo Group Inc. OPERA TION TROUBLE POSSIBLE CAUSE POSSIBLE REMEDY Excessive Vibr ations Blade Broken. Replace blades, in sets. Blade carrier bent. Replace carrier . Blade hub not properly Remove hub, check t apered spline seated on shaf t shaft, clean an d replace.
OPERATION PA92 04/09 Operation Section 4-52 © 2009 Alamo Group Inc. OPERA TION TROUBLE POSSIBLE CAUSE POSSIBLE REMEDY Clutch Slips Excessively Clutch linings badly worn or Repair clutch per maintenance plates warp ed. section o f manuals. T oo much power for clutch.
Maintenanc e Section 5-1 © 2008 Alamo Group Inc. MAINTENANCE SECTION.
MAINTENANCE PA92 03/08 Maintenance Section 5-2 © 2008 Alamo Group Inc. MAINTENANCE LUBRICA TION General Refer to the lubrication diagram and grease daily all the points shown. 1. Power take-of f shaft - The PTO shaf t should be regularly examined to ensure that it is in g ood condition together with the guar ds.
MAINTENANCE PA92 03/08 Maintenance Section 5-3 © 2008 Alamo Group Inc. MAINTENANCE HYDRAULIC SYSTEM Oil Supply Check daily the oil level in the reserv oir . No fixed time period can be quoted for oil changes as operating conditions and maintenance st andards vary so widely .
MAINTENANCE PA92 03/08 Maintenance Section 5-4 © 2008 Alamo Group Inc. MAINTENANCE Hose Replacement 1. Replace one hose at a time to av oid the risk of wrong connections. 2. When the hose is scr ewed to an additional fitt ing or union, use a second sp anner on the union to avoid breaking both seals.
MAINTENANCE PA92 03/08 Maintenance Section 5-5 © 2008 Alamo Group Inc. MAINTENANCE FLAILHEAD 1. Frequently inspe ct the rotor assembly for damaged or mi ssing flails. Bolts an d nuts securing the flails to the rotor should be regularly checked an d kept tight .
MAINTENANCE PA92 03/08 Maintenance Section 5-6 © 2008 Alamo Group Inc. MAINTENANCE HOSE CONNECTIONS Main Contro l V alve A Supply B Return (T i illustrated) C Reach base - Restrictor M D Reach gland .
MAINTENANCE PA92 03/08 Maintenance Section 5-7 © 2008 Alamo Group Inc. MAINTENANCE A Supply from pump B Return t o tank C Motor upper D Motor lower E Return from main valve.
MAINTENANCE PA92 03/08 Maintenance Section 5-8 © 2008 Alamo Group Inc. MAINTENANCE STORAGE If machine is to be lef t standing for an extended period of time , lightly coat the e xposed por tions of the r am rods with grease.
.
ALAMO-INDUSTRIAL LIMITED W ARRANTY 1. LIMITED W ARRA NTIES 1.01. Alamo Industrial warrants for one year from the purchase dat e to the original non-commercial, governmental, or municipal purchaser (“Purchaser”) and warrants for six months to the original commercial or industrial purchaser 1.
T o keep your implement running efficien tly and safely , read your manual thoroug hly and follow these directions and the Safety Messages in this Ma nual. The T able of Cont ent s clearly identifies each section where you can easily find the information you need.
P A92-SOM-04/09 Printed U.S.A P/N 7192859C.
Een belangrijk punt na aankoop van elk apparaat Alamo PA92 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Alamo PA92 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Alamo PA92 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Alamo PA92 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Alamo PA92 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Alamo PA92 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Alamo PA92 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Alamo PA92 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.