Gebruiksaanwijzing /service van het product 3616A-SN1302 van de fabrikant EnGenius Technologies
Ga naar pagina of 24
~2~ Table of Contents Safety Inst ructions ........................................................................................ 4 General Safety Instructions ...................................................................... 4 Product Safety Instruct ions .
~3~ Advanced Oper ations ................................................................................. 31 Handset Regi stration.............................................................................. 31 Handset Group Su bscription ..........
~5~ 3. Changes or modifications to this product not expressively approve d by the manufacturer will void the warr anty and the FCC authorization to operate the equipment. Use only manu facturer provided accessories. 4. Do not use the telephone near water.
~7~ Regulatory Information DuraFon 1X FCC ID: NI3-SN1302 IC: 3616A-SN1302 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) this device may not cause ha rmful interference, and 2) this device must accept any interferenc e received, including interference that may cause undesired opera tion.
~9~ Equipment Checklist 1. In a Base + Handset package, plea se find the following component s: a. Base Station x 1 b. Base Antenna x 1 c. Base AC/DC Adaptor x 1 d. Handset x 1 e. Low Profile Handset Antenna x 1 f. Optimal Performance Handset Antenna x 1 g.
~11~ Handset Features Basic Handset Features 1. 4-lin e LCD (Liquid Crystal Display) a. The LCD display has LED (Light Emitting Diode) for ba cklighting.
~13~ a. Five-level ringer volume selectio ns (high/ low/ vibrate/ vibrate-the n- ring/ off) b. Four ringer type selections 3. Caller ID a. Displays incoming call phone number and name on the LCD (nee ds Caller ID service from local telephone company) 4.
~15~ a. Allow user to pre-program the most frequ ently used PBX feature along with its feature code into Du raFon which is adjunct to the PBX system b. Up to 9 entries can be saved c. Once the feature and featur e codes being progra mmed, you can quick perform those functions du ring the call by pressing OPTION soft key.
~17~ Base Features Basic Base Station Features 1. Antenna a. The antenna port has a reverse thread connector ; to remove antenna or cable, turn clockwi se; to install, turn counterclockwi se.
~19~ Charger Features 1. DC In Connects to Charger AC Adaptor. 2. Handset Chargi ng Slot a. Charge handset battery when handset is placed in cradle. b.
~21~ Handset and Charger Ins tallation 1. Plug the tran sformer end of the Cha rger AC/DC adaptor into a standa rd AC electric power outlet, plug the other end into the “DC In ” jack on the back of the Charger. 2. Install battery pack onto the handset.
~23~ Making a Telephone Call 1. Press TALK, wait for dial tone, and then enter phone number. 2. Alternatively, you can enter phone number first then press TALK key. When using this method, you can use the CLEAR (Left) and DELETE (Right) soft keys to edit the number entered.
~25~ handset responds. 4. Before a handset answers, the INTERCOM can be cancelled from the base by pressing INTERCOM again. Ho wever, once a hand set answers, only the answering handset can end the call.
~27~ [Note] Intercom numbers (Handset ID ) are not stored in the last 1 0 numbers dialed log. Receiving a Telephone Call 1. When an incoming call arrives, the ri nger will ring or vibrate unless the ringer has been turned off.
~29~ effective only for the current call. Do Not Disturb (Silent Ri ng) 1. Enter the key sequence M ENU – Sounds – Ring Volume, then select “Off”. Press SAVE to confirm your choice. This will turn off the ringer until it is turn on again from the menu.
~31~ Advanced Operations Handset Registration 1. If your handset(s) is purchased as part of a system, it has bee n pre- registered with the base st ation at the factory. 2. If Handset ID as “00,” that means it is a new handset or the ID has been erased.
~33~ 3 rd , and 4 th base unit. 3. Registration: a. Press MENU-6 from HS 11 to enter the registration mode b. Press and hold the Registration (REG) button on that additional base unit, which you want to add into the system) for 2 seconds until 4 LEDs light up.
~35~ a. Press Menu-9 and enter the two-digit base ID to enter the System mode. b. Press 1 to enter Tone selection c. You can adjust the dial mode between Tone and Pulse. The default setting is Tone. d. The default setting is Tone. 2. Flash Time a. Press Menu-9 and enter the two-digit base ID to enter the System mode.
~37~ Notes: 1. When enter a phone number, the cursor aut omatically advances to the n ext digit field. Use ¿ or À scrolling key to move the cursor backward or forward to insert or delete. 2. When entering a name, the cursor aut omatic ally advances to the next character field if you press a different ke y for the next character.
~39~ confirm your selection. 3. To edit the Call barring code a. Once turn on the call barring feature, you can key in the “call barring” cod e. (1) Up to 5 digit can be edit to be call barring code. For example, if you want to block all call dialin g to Manhanttan, NY area, y ou can enter 1212 a s the call barring code.
~41~ 2. Up to 9 most frequent ly used PBX feature codes can be pre-programmed. 3. Name and enter PBX feature codes: a. Press Menu (Right) soft key while the handset is in standby. b. Press “5” following by “0” to enter “PBX Options” menu. c.
~43~ (2) Save: press “2” to edit and save or save without editing into the phonebook. (3) View Number: press “3” to view the complete number if the phone number is longer than 14 digit s. b. Press “2” to view the last 10 phone numbers received, starting from the most recent one.
~45~ (2) When finished; press SAVE to save change. g. Press “7” to change the LCD backlight: (1) Use ¿ or À to scroll through options: On, Off, and 8 Seconds. Default = 8 seconds, meaning that the backlight will turn off the backlight after 8 seconds of inactivity.
~47~.
Een belangrijk punt na aankoop van elk apparaat EnGenius Technologies 3616A-SN1302 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen EnGenius Technologies 3616A-SN1302 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens EnGenius Technologies 3616A-SN1302 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding EnGenius Technologies 3616A-SN1302 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over EnGenius Technologies 3616A-SN1302 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van EnGenius Technologies 3616A-SN1302 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de EnGenius Technologies 3616A-SN1302 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met EnGenius Technologies 3616A-SN1302 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
