Gebruiksaanwijzing /service van het product 1750 van de fabrikant Epson
Ga naar pagina of 193
PowerLite ® 1750/1760W/1770W/1775W Projector User's Guide.
.
Contents Introduction to Your Projector ................................................................................................................... 9 Projector Features ..........................................................................
Connecting to External USB Devices ............................................................................................ 39 USB Device Projection ..................................................................................................
Remote Control Operation ................................................................................................................. 74 Using the Remote Control as a Wireless Mouse ................................................................
Projector Identification System for Multiple Projector Control ........................................................... 101 Setting the Projector ID....................................................................................................
Solutions When "No Signal" Message Appears ........................................................................... 144 Displaying From a PC Laptop ..........................................................................................
.
Introduction to Your Projector Refer to these sections to learn more about your projector and this manual. Projector Features Notations Used in the Documentation Where to Go for Additional Information.
Product Box Contents Additional Components Optional Equipment and Replacement Parts Registration and Warranty Information Parent topic: Introduction to Your Projector Related concepts Projector Parts Locations Product Box Contents Save all the packaging in case you need to ship the projector.
1 Projector 2 Remote control 3 Remote control batteries (two AA alkaline) 4 Power cord 5 VGA computer cable 6 USB cable 7 Audio adapter cable 8 Carrying case 11.
9 Wireless LAN module (PowerLite 1775W) 10 Epson Quick Wireless USB Connection Key (PowerLite 1775W) 11 Password Protected sticker 12 Projector documentation CD 13 Projector software CD Parent topic: .
Option or part Part number Epson DC-11 document camera V12H377020 Epson DC-10s document camera ELPDC10S Epson DC-06 document camera V12H321001 BrightLink Solo interactive module (IU-01) V12H415020 Ken.
Notations Used in the Documentation Follow the guidelines in these notations as you read your documentation: • Warnings must be followed carefully to avoid bodily injury. • Cautions must be observed to avoid damage to your equipment. • Notes contain important information about your projector.
Projector Parts - Base Projector Parts - Control Panel Projector Parts - Remote Control Parent topic: Introduction to Your Projector Projector Parts - Front/Top 1 Exhaust vent 2 Wireless LAN module in.
10 Air intake vent (air filter) 11 Speaker 12 Projector status lights 13 Zoom ring 14 Focus ring (PowerLite 1750/1760W/1770W) 15 Control panel 16 Lamp cover Parent topic: Projector Parts Locations Pro.
Projector Parts - Base 1 Mounting bracket holes 2 Rear feet 3 Front adjustable foot 4 Wireless LAN module screw (PowerLite 1760W/1770W/1775W) Parent topic: Projector Parts Locations 17.
Projector Parts - Control Panel 1 Power button and light 2 Screen Fit button (PowerLite 1775W; adjusts projected images) 3 Source Search button (searches for connected video sources) 4 Enter button (s.
Projector Parts - Remote Control 1 Power button 2 Computer button (selects connected computer source) 3 Video button (cycles through connected video sources) 4 Screen Fit button (adjusts image shape; .
7 Freeze button (stops video action) 8 Auto button (automatically adjusts position, tracking, and sync settings) 9 Aspect button (selects the image aspect ratio) 10 Page Up / Down buttons (control pre.
Setting Up the Projector Follow the instructions in these sections to set up your projector for use. Projector Placement Projector Connections Installing Batteries in the Remote Control Opening the Lens Cover Projector Placement You can place the projector on almost any flat surface to project your presentation.
Front Rear Ceiling 22.
Rear Ceiling Wherever you set up the projector, make sure to position it squarely in front of the center of the screen, not at an angle, if possible. If you project from the ceiling or from the rear, be sure to select the correct Projection option in the projector's menu system.
PowerLite 1760W/1770W/1775W 4:3 Aspect Ratio Image or Screen Screen or image size Projection distance (1) Offset from lens center (2) Wide to Tele 28 inches (71 cm) 28 to 33 inches –1.5 inches (–4 cm) (71 to 85 cm) 30 inches (76.2 cm) 30 to 36 inches –1.
Screen or image size Projection distance (1) Offset from lens center (2) Wide to Tele 40 inches (101.6 cm) 40 to 48 inches –2.2 inches (–6 cm) (102 to 122 cm) 50 inches (127 cm) 50 to 60 inches –2.7 inches (–7 cm) (127 to 153 cm) 60 inches (152.
Screen or image size Projection distance (1) Offset from lens center (2) Wide to Tele 40 inches (101.6 cm) 36 to 44 inches –0.9 inch (–2 cm) (92 to 111 cm) 50 inches (127 cm) 45 to 55 inches –1.1 inches (–3 cm) (115 to 139 cm) 60 inches (152.4 cm) 55 to 66 inches –1.
Screen or image size Projection distance (1) Offset from lens center (2) Wide to Tele 30 inches (76.2 cm) 26 to 32 inches –1.4 inches (–4 cm) (67 to 80 cm) 40 inches (101.6 cm) 35 to 42 inches –1.9 inches (–5 cm) (89 to 108 cm) 50 inches (127 cm) 44 to 53 inches –2.
PowerLite 1750 4:3 Aspect Ratio Image or Screen Screen or image size Projection distance (1) Offset from lens center (2) Wide to Tele 30 inches (76.2 cm) 28 to 34 inches –2 inches (–5 cm) (72 to 86 cm) 40 inches (101.6 cm) 38 to 45 inches –2.7 inches (–7 cm) (96 to 116 cm) 50 inches (127 cm) 47 to 57 inches –3.
Screen or image size Projection distance (1) Offset from lens center (2) Wide to Tele 60 inches (152.4 cm) 57 to 69 inches –4.1 inches (–10 cm) (145 to 174 cm) 80 inches (203.2 cm) 76 to 92 inches –5.4 inches (–14 cm) (194 to 233 cm) 100 inches (254 cm) 95 to 115 inches –6.
Screen or image size Projection distance (1) Offset from lens center (2) Wide to Tele 60 inches (152.4 cm) 62 to 75 inches 0.5 inch (1 cm) (158 to 190 cm) 70 inches (177.8 cm) 73 to 87 inches 0.6 inch (1 cm) (185 to 222 cm) 80 inches (203.2 cm) 83 to 100 inches 0.
Screen or image size Projection distance (1) Offset from lens center (2) Wide to Tele 40 inches (101.6 cm) 40 to 48 inches –0.7 inch (–2 cm) (102 to 123 cm) 50 inches (127 cm) 50 to 60 inches –0.9 inch (–2 cm) (128 to 154 cm) 60 inches (152.4 cm) 60 to 73 inches –1.
• If your presentation or video includes sound, you can connect audio input cables, if necessary. • For presentations or slide shows without a computer, you can connect USB devices (such as a flash drive or camera) or an optional document camera.
• Mac OS X 10.6.x Connect the projector to your computer using a USB cable. Note: The computer display resolution must be between 640 × 480 and 1600 × 1200 (Windows) or 1680 × 1200 (Macintosh) to project using USB.
Related references Projector Setup Settings - Extended Menu Connecting to a Computer for VGA Video You can connect the projector to your computer using a VGA computer cable.
3. Connect the other end to the projector's HDMI port. 1 HDMI port Parent topic: Connecting to Computer Sources Connecting to a Computer for USB Mouse Control If you connected your computer to a Computer or HDMI port on the projector, you can set up the remote control to act as a wireless mouse.
Related references Projector Setup Settings - Extended Menu Projector Parts - Remote Control Connecting to a Computer for Sound If your computer presentation includes sound and you did not connect it using the projector's USB TypeB or HDMI port, you can still play sound through the projector's speaker system.
3. Connect the other end to the projector's HDMI port. 1 HDMI port Parent topic: Connecting to Video Sources Connecting to a Component-to-VGA Video Source If your video source has component video ports, you can connect it to the projector using a component-to-VGA video cable.
Related references Input Signal Settings - Signal Menu Connecting to a Composite Video Source If your video source has a composite video port, you can connect it to the projector using an optional RCA-style video or A/V cable. 1. Make sure the projector and your video source are turned off.
2. Connect the other end of the cable to the projector's Audio port. 1 Audio port Parent topic: Connecting to Video Sources Connecting to External USB Devices Follow the instructions in these sections to connect external USB devices to the projector.
Parent topic: Connecting to External USB Devices Related topics Projecting a Slide Show Connecting a USB Device or Camera to the Projector You can connect your USB device or camera to the projector's USB Type A port and use it to project a slide show or presentation.
2. Press the USB button on the remote control. 3. Press the button again to cycle through other USB sources, if available. Parent topic: Connecting to External USB Devices Disconnecting a USB Device o.
Installing Batteries in the Remote Control The remote control uses the two AA batteries that came with the projector. 1. Open the battery cover as shown.
3. Close the battery cover and press it down until it clicks into place. Parent topic: Setting Up the Projector Opening the Lens Cover 1. To open the projector's lens cover, slide the A/V Mute slide lever.
2. To cover the lens or temporarily turn off the projected picture and sound, slide the A/V Mute slide cover closed. Parent topic: Setting Up the Projector 44.
Using the Projector on a Network Follow the instructions in these sections to set up your projector for use on a network. Wireless Network Projection Setting Up Projector Network E-Mail Alerts Setting.
Related references Optional Equipment and Replacement Parts Installing the Wireless LAN Module To use the PowerLite 1760W/1770W/1775W over a wireless network, install the Epson 802.11g/b/n wireless module in the projector. Do not install any other type of wireless module.
3. Remove the wireless LAN module cover. 4. Insert the wireless LAN module into the port. 47.
5. Replace the cover and secure it using the screw you removed. 6. Plug in and turn on the projector. Parent topic: Wireless Network Projection Using Quick Wireless Connection (Windows Only) You can use the optional Epson Quick Wireless Connection USB key to quickly connect the projector to a Windows computer wirelessly.
4. Now connect the USB key to a USB port on your computer or notebook. Note: In Windows Vista, if you see the AutoPlay window, select Run LaunchU3.exe , then select Allow on the next screen. 5. Follow the on-screen instructions to install the Quick Wireless Connection driver.
3. Select the Network menu and press Enter . 4. Select Network Configuration and press Enter . 5. Select the Basic menu and press Enter . 6. Select the following basic options as necessary: • Projector Name lets you enter a name up to 16 alphanumeric characters long to identify the projector over the network.
• PJLink Password lets you enter a password up to 32 alphanumeric characters long for using the PJLink protocol for projector control. • Web Control Password lets you enter a password up to 8 alphanumeric characters long for accessing the projector over the web.
Wireless LAN Menu Settings Note: See your projector's EasyMP Network Projection Operation Guide for details on selecting these settings. Setting Options Description Wireless LAN Power On Turns on.
Setting Options Description IP Settings DHCP ( On or Off ) Selects DHCP if your network assigns addresses automatically, IP Address or turns off DHCP so you can Subnet Mask enter the network's IP.
Parent topic: Wireless Network Projection Setting Up Wireless Network Security You can set up security for your projector to use on the wireless network (PowerLite 1760W/1770W/1775W).
Parent topic: Wireless Network Projection Wireless Security Menu Settings Settings on the Security menu let you select the type of security and security settings that match the network you are connecting the projector to.
Parent topic: Setting Up Wireless Network Security Setting Up Projector Network E-Mail Alerts You can set up the projector to send you an e-mail alert over the network if there is a problem with the projector. 1. Press the Menu button on the remote control.
8. Choose an Address field, enter the e-mail address, and select the alerts you want to receive there. Repeat for up to three addresses. Note: Your e-mail address can be up to 32 alphanumeric characters long. 9. When you finish selecting settings, select Complete and follow the on-screen instructions to save your settings and exit the menus.
4. Select the Others menu and press Enter . 5. Enter up to two IP addresses to receive SNMP notifications, using 0 to 255 for each address field. Note: Do not use these addresses: 127.x.x.x or 224.0.0.0 through 255.255.255.255 (where x is a number from 0 to 255).
2. Start your web browser on a computer connected to the network. 3. Type the projector's IP address into the browser's address box and press the computer's Enter key. You see the Web Control screen. 4. To select projector menu settings, select the name of the menu and follow the on-screen instructions to select settings.
10 Volume button controls 6. Select the icon corresponding to the projector function you want to control. Parent topic: Using the Projector on a Network Related concepts Wireless Network Projection 60.
Using Basic Projector Features Follow the instructions in these sections to use your projector's basic features. Turning On the Projector Turning Off the Projector Selecting the Language for the .
1. Open the projector's lens cover. 2. Connect the power cord to the projector's power inlet. 62.
3. Plug the power cord into an electrical outlet. The projector's power light turns orange. This indicates that the projector is receiving power, but is not yet turned on. Note: With Direct Power On turned on, the projector turns on as soon as you plug it in.
The projector displays a shutdown confirmation screen. 2. Press the power button again. (To leave it on, press any other button.) The projector beeps twice, the lamp turns off, and the power light turns orange. Note: With Epson's Instant Off technology, there is no cool-down period so you can pack up the projector for transport right away.
Caution: To avoid damaging the projector or lamp, never unplug the power cord when the power light is green or flashing orange. 4. Close the projector's lens cover.
3. Press the down arrow button to select the Extended menu and press Enter . Note: The Network menu does not appear on non-network projector models. 4. Press the down arrow button to select the Language setting and press Enter . 5. Select the language you want to use and press Enter .
2. To adjust the front foot, pull up on the foot release lever and lift the front of the projector. The foot extends from the projector. 3. Release the lever to lock the foot. 4. If the image is tilted, rotate the rear feet to adjust their height. If the projected image is unevenly rectangular, you need to adjust the image shape.
Image Shape You can project an evenly rectangular image by placing the projector directly in front of the center of the screen and keeping it level. If you place the projector at an angle to the screen, or tilted up or down, or off to the side, you may need to correct the image shape for the best display quality.
1. Press the Screen Fit button on the projector or remote control. You see a message on the screen. 2. Move the projector as necessary to display the message in the middle of the screen. 3. Zoom into the image until its white frame extends beyond the edges of the screen.
Two displays flash briefly, then this message appears: 5. Fine-tune the image shape as necessary using the arrow buttons on the control panel. 6. When you are finished, press Esc . Now, if necessary, you can correct the image corners individually using Quick Corner by pressing the arrow buttons on the control panel.
5. Select the Quick Corner setting and press Enter . You see the Quick Corner adjustment screen. 6. Use the arrow buttons on the projector or the remote control to select the corner of the image you want to adjust. Then press Enter . 7. Press the arrow buttons to adjust the image shape as necessary.
2. Press a keystone button on the projector's control panel. After correction, your image is slightly smaller. Note: If the projector is installed out of reach, you can also correct the image shape using the Keystone settings in the projector menus.
2. To enlarge or reduce the image size, rotate the projector's zoom ring. 1 PowerLite 1775W 2 PowerLite 1750/1760W/1770W Parent topic: Using Basic Projector Features Focusing the Image Before you sharpen the focus, turn on the projector and display an image.
1 PowerLite 1775W 2 PowerLite 1750/1760W/1770W Parent topic: Using Basic Projector Features Remote Control Operation The remote control lets you control the projector from almost anywhere in the room, up to 19.7 feet (6 m) away. You can point it at the screen, or the front or back of the projector.
Note: Avoid using the remote control in conditions with bright fluorescent lights or in direct sunlight, or the projector may not respond to commands. If you will not use the remote control for a long time, remove the batteries.
• To move the cursor on the screen, use the arrow buttons. • To left-click, press the Enter button once (press it twice to double-click). • To right-click, press the Esc button. • To drag-and-drop, hold the Enter button as you move the cursor with the arrow buttons, then release Enter at the destination.
2. Use the arrow buttons on the remote control to move the pointer on the screen. 3. Press Esc to clear the pointer from the screen. Parent topic: Remote Control Operation Related references Projector.
3. Do one of the following: • Press the Source Search button on the projector or remote control until you see the image from the source you want. 78.
• Press the button for the source you want on the remote control. If there is more than one port for that source, press the button again to select the other source. 1 Computer port source 2 Video and HDMI sources 3 USB port sources (computer display and external devices) 4 Network source 4.
• Rear/Ceiling flips the image over top-to-bottom and horizontally to project from the ceiling and the rear. You can change the projection mode using the remote control or by changing a menu setting.
3. Select the Extended menu and press Enter . 4. Select the Projection setting and press Enter . 5. Select a projection mode and press Enter . 6. Press Menu to exit. Parent topic: Projection Modes Image Aspect Ratio The projector can display images in different width-to-height ratios called aspect ratios.
1. Turn on the projector and switch to the image source you want to use. 2. Press the Aspect button on the remote control. The shape and size of the displayed image changes, and the name of the aspect ratio appears briefly on the screen. 3. To cycle through the available aspect ratios for your input signal, press the Aspect button repeatedly.
PowerLite 1760W/1770W/1775W Aspect ratio setting Description Auto Automatically sets the aspect ratio according to the input signal. Normal Displays images using the full projection area and maintains the aspect ratio of the image. 16:9 Converts the aspect ratio of the image to 16:9.
1. Turn on the projector and switch to the image source you want to use. 2. If you are projecting from a DVD player or other video source, insert a disc or other video media and press the Play button, if necessary. 3. Press the Color Mode button on the remote control to change the Color Mode.
Color Mode Description Whiteboard Best for presentations onto a whiteboard (adjusts the colors accordingly) Photo Best for still images projected in a bright room Customized Best for customizing a color mode using manual Color Adjustment settings in the Image menu.
Parent topic: Color Mode Controlling the Volume With the Volume Buttons You can use the Volume buttons on the remote control to adjust the volume as you project a presentation with audio. The volume buttons control the projector’s internal speaker system.
• Present a slide show of all images in a folder • Project PowerPoint presentations converted to "scenario" files using the EasyMP Slide Converter program included with your projector No.
Starting a Slide Show or Presentation After connecting a USB device to the projector, you can switch to the USB input source and start your slide show or presentation. Note: You can change the Slideshow operation options or add special effects by highlighting Option at the bottom of the screen and pressing Enter .
• To move back up a folder level on your device, highlight Back to Top and press Enter . • To view additional images in a folder, highlight Next page or Previous page and press Enter .
Option Available settings Description Sort Order In Ascending Sorts files in first-to-last order In Descending Sorts files in last-to-first order Continuous Play On Displays a slide show continuously Off Displays a slide show one time through Screen switching No Does not display the next file automatically time 1Sec.
Adjusting Projector Features Follow the instructions in these sections to use your projector's feature adjustments. Shutting Off the Picture and Sound Temporarily Stopping Video Action Temporaril.
Related references Projector Setup Settings - Extended Menu Stopping Video Action Temporarily You can temporarily stop the action in a video or computer presentation and keep the current image on the screen. Any sound or video action continues to run, however, so you cannot resume projection at the point that you stopped it.
1. Press the E-Zoom + button on the remote control. You see a crosshair on the screen indicating the center of the zoom area. 2. Use the following buttons on the remote control to adjust the zoomed image: • Use the arrow buttons to position the crosshair in the image area you want to zoom into.
Installing a Security Cable Parent topic: Adjusting Projector Features Password Security Types You can set up these types of password security using one shared password: • Power On Protect password prevents anyone from using the projector without first entering a password.
You see the prompt "Change the password?". 3. Select Yes and press Enter . 4. Hold down the Num button on the remote control and use the numeric buttons to set a four-digit password. The password displays as **** as you enter it. Then you see the confirmation prompt.
If you do not see this menu, hold down the Freeze button on the remote control for five seconds until the menu appears. 1. To prevent unauthorized use of the projector, select Power On Protect , press Enter , select On , and press Esc .
1. Hold down the Num button on the remote control while you enter the password using the numeric buttons. The password screen closes. 2. If the password is incorrect, the following may happen: • You see a "wrong password" message and a prompt to try again.
1. Display the image you want to project as the User's Logo from a connected computer or video source. 2. Press the Menu button, select the Extended menu, and press Enter . 3. Select the User's Logo setting and press Enter . You see a prompt asking if you want to use the displayed image as a user's logo.
You see the User's Logo zoom factor menu. 7. Select a zoom percentage and press Enter . You see a prompt asking if you want to save the image as the User's Logo.
Locking the Projector's Buttons You can lock the buttons on the projector's control panel to prevent anyone from using the projector. You can lock all the buttons or all the buttons except the power button. 1. Press the Menu button. 2. Select the Settings menu and press Enter .
Installing a Security Cable You can use the security slot on the back of the projector to attach a Kensington Microsaver Security system, available from Epson.
3. Select Projector ID and press Enter . 4. Use the arrow buttons on the remote control to select the identification number you want to use for the projector. Then press Enter . Repeat these steps for all the other projectors you want to operate from one remote control.
4. Hold down the ID button on the remote control while you press the numeric button that matches the projector's ID. Then release the buttons. 5. Press the ID button on the remote control to check if the ID-setting process worked. You see a message displayed by the projector.
5. Press the Menu button, select the Extended menu, and press Enter . 6. Select the Multi-screen setting and press Enter . 7. Set the Adjustment Level setting to 1 and press Enter .
Adjusting the Menu Settings Follow the instructions in these sections to access the projector menu system and change projector settings. Note: The Network menu does not appear on non-network projector models.
1. Press the Menu button on the control panel or remote control. You see the menu screen displaying the Image menu settings. 106.
2. Press the up or down arrow buttons to move through the menus listed on the left. The settings for each menu are displayed on the right. Note: The available settings depend on the current input source. 3. To change settings in the displayed menu, press Enter .
To change settings for an input source, make sure the source is connected and select that source. Setting Options Description Color Mode See the list of available Color Adjusts the vividness of image .
Setting Options Description Color Adjustment Slider bars for each color Adjusts the intensity of red, green, and blue hues in the image; for Customized Color Mode, also adjusts cyan, magenta, and yell.
Component video input source Composite video input source HDMI input source (PowerLite 1760W/1770W/1775W) 110.
Note: You can restore the default settings of the Position , Tracking , and Sync settings by pressing the Auto button on the remote control. To change settings for an input source, make sure the source is connected and select that source.
Setting Options Description Position Up, down, left, right Adjusts the image location on the screen Progressive Sets whether to convert Off interlaced-to-progressive signals Video for certain video im.
Setting Options Description Aspect See the list of available aspect Sets the aspect ratio ratios (width-to-height ratio) for the selected input source Overscan Auto Changes the projected image ratio t.
Setting Options Description Keystone H/V Keystone Adjusts image shape to rectangular (horizontally and Quick Corner vertically) H/V Keystone : lets you manually correct horizontal and vertical sides, .
Setting Options Description User Button Power Consumption Assigns a menu option to the User button on the remote Info control for one-touch access Progressive Closed Caption Test Pattern Multi-screen .
Setting Options Description Display Messages Selects various display options Display Background Messages : controls whether messages are displayed on the Startup Screen screen A/V Mute Display Backgro.
Setting Options Description Operation Direct Power On Selects various operation options Sleep Mode Direct Power On : lets you turn on the projector without pressing Sleep Mode Timer the power button L.
Setting Options Description Multi-screen Adjustment Level ( 1 to 9 ) Matches display qualities and colors of multiple projectors Brightness Correct. Color Correct.
Setting Options Description Net. Info - Wireless LAN Connection mode Displays wireless network status and details Antenna level Projector Name SSID DHCP IP Address Subnet Mask Gateway Address MAC Addr.
Video input source USB or LAN input source 120.
Note: The lamp usage timer does not register any hours until you have used the lamp for at least 10 hours. Available settings depend on the current input source.
Information item Description Event ID Displays the Event ID number corresponding to a specific projector problem; see the list of Event ID codes (PowerLite 1760W/1770W/1775W) Event ID Code List Parent.
Event ID code Cause and solution 0891 Cannot find an access point with the same SSID. Set your computer, access point, and projector to the same SSID. 0892 The WPA/WPA2 authentication type does not match. Make sure the wireless network security settings are correct.
You cannot reset the following settings using the Reset All option: • Input Signal • User's Logo • Language • Network menu items • Lamp Hours • Password • User Button • Multi-scre.
Maintaining and Transporting the Projector Follow the instructions in these sections to maintain your projector and transport it from place to place. Projector Maintenance Transporting the Projector Projector Maintenance Your projector needs little maintenance to keep working at its best.
• To remove stubborn smudges, moisten a soft, lint-free cloth with lens cleaner and gently wipe the lens. Warning: Do not use a lens cleaner that contains flammable gas. The high heat generated by the projector lamp may cause a fire. Caution: Do not use glass cleaner to clean the lens, or you may damage it.
2. Gently remove the dust using a small vacuum designed for computers or a very soft brush (such as a paintbrush). Note: You can remove the air filter so you can clean both sides of it. Do not rinse the air filter in water, or use any detergent or solvent to clean it.
2. Grasp the tab at the center of the air filter and pull it out of the projector. Note: Air filters contain polycarbonate, ABS resin, and polyurethane foam.
3. Place the new air filter in the projector as shown and push gently until it clicks into place. Parent topic: Air Filter and Vent Maintenance Projector Lamp Maintenance The projector keeps track of the number of hours the lamp is used and displays this information in the projector's menu system.
Projector Lamp Specifications Optional Equipment and Replacement Parts Replacing the Lamp Before you replace the lamp, let the projector cool down for at least one hour so the lamp will not be hot. Warning: Let the lamp fully cool before replacing it to avoid injury.
4. Slide the lamp cover out and lift it off. 5. Lift up the metal bar securing the lamp. 131.
6. Lift up the lamp handle and gently pull the lamp out of the projector. Caution: Lift the lamp handle carefully to avoid damaging the handle as you pull out the lamp. Note: The lamp(s) in this product contain mercury. Please consult your state and local regulations regarding disposal or recycling.
7. Gently insert the new lamp into the projector. If it does not fit easily, make sure it is facing the right way. Press down on the area shown to secure the lamp in place. Caution: Do not touch any glass on the lamp assembly to avoid premature lamp failure.
9. Replace the lamp cover and tighten the screw to secure it. Note: Be sure the lamp cover is securely installed or the lamp will not come on. Reset the lamp timer to zero to keep track of the new lamp’s usage.
3. Select the Reset menu and press Enter . 4. Select Reset Lamp Hours and press Enter . You see a prompt asking if you want to reset the lamp hours. 5.
1. Open the battery cover as shown. 2. Remove the old batteries. Warning: If the battery fluid has leaked, wipe it away with a soft cloth and avoid getting the fluid on your hands. If it gets on your hands, wash them immediately to avoid injury. 3. Insert the batteries with the + and – ends facing as shown.
4. Close the battery cover and press it down until it clicks into place. Warning: Dispose of used batteries according to local regulations. Do not expose batteries to heat or flame. Keep batteries out of the reach of children; they are choking hazards and are very dangerous if swallowed.
Note: Epson shall not be liable for any damages incurred during transportation. Parent topic: Maintaining and Transporting the Projector 138.
Solving Problems Check the solutions in these sections if you have any problems using the projector. Projection Problem Tips Projector Light Status Using the Projector Help Displays Solving Image or S.
1 Power light 2 Lamp light 3 Temperature light Power light Lamp light Temperature Status and solution light Green Off Off Normal operation. Flashing green Off Off Warming up. Wait for an image to appear. Orange Off Off Standby or sleep mode. Flashing orange Off Off Preparing network monitoring or shutting down.
Power light Lamp light Temperature Status and solution light Red Flashing red Off Lamp has a problem. • Check to see if the lamp is burned out, broken, or installed incorrectly. Reseat or replace the lamp as necessary. • Make sure that the vents and air filter are not clogged with dust or obstructed by nearby objects.
Using the Projector Help Displays You can display information to help you solve common problems using the projector's Help system. 1. Turn on the projector. 2. Press the Help button on the projector or the remote control. You see the Help menu. 3.
• Make sure all necessary cables are securely connected and the power is on for the projector and connected video sources. • Press the projector's power button to wake it from standby or sleep mode. Also see if your connected computer is in sleep mode or displaying a blank screen saver.
Parent topic: Solving Image or Sound Problems Related references Projector Setup Settings - Extended Menu Solutions When "No Signal " Message Appears If the "No Signal" message appears, try the following solutions: • Press the Source Search button and wait a few seconds for an image to appear.
3. Do one of the following: • Mac OS X 10.6.x : Click Show displays in menu bar . • Other Mac OS X versions : Select the VGA Display or Color LCD option, click the Arrange or Arrangement tab, and check the Mirror Displays checkbox. (See your laptop manual for details.
Solutions When the Image is Not Rectangular If the projected image is not evenly rectangular, try the following solutions: • Place the projector directly in front of the center of the screen, facing it squarely, if possible.
• If you adjusted the image shape using the projector controls, try decreasing the Sharpness setting to improve image quality. • If you connected an extension cable, try projecting without it to see if it caused interference in the signal.
Image Quality Settings - Image Menu Projection Distance Related tasks Automatically Correcting Image Shape With Screen Fit Focusing the Image Cleaning the Lens Solutions When the Image Brightness or C.
Solutions When There is No Sound or Low Volume If there is no sound when you expect it or the volume is too low, try the following solutions: • Press a Volume button on the remote control to adjust the volume. • Press the A/V Mute button to resume video and audio if they were temporarily stopped.
• If the projector's lamp shuts off and the power and Temp lights are red, the projector has overheated and shut off. Check the solutions for this light status.
Remote Control Operation Solutions to Password Problems If you cannot enter or remember a password, try the following solutions: • You may have turned on password protection without first setting a password. Try entering 0000 using the remote control.
Internet Support Visit Epson's support website at www.epson.com/support (U.S.) or www.epson.ca/support (Canada) for solutions to common problems with your projector. You can download utilities and documentation, get FAQs and troubleshooting advice, or e-mail Epson with your questions.
Technical Specifications These sections list the technical specifications of your projector. General Projector Specifications Projector Lamp Specifications Remote Control Specifications Projector Dime.
Contrast ratio 2000:1 with Auto Iris On and Normal Power Consumption mode Image size 30 to 300 inches (0.8 to 7.6 m) Projection distance PowerLite 1750 : 2.
USB Type B port compatibility USB 1.1 and 2.0 compliant for USB display or external mouse control USB Type A port compatibility One USB 1.1 and 2.0 compliant port for USB device input or document came.
Depth 8.3 inches (210 mm) Weight PowerLite 1750 : 3.66 lb (1.66 kg) PowerLite 1760W/1770W : 3.7 lb (1.68 kg) PowerLite 1775W : 3.77 lb (1.71 kg) Parent topic: Technical Specifications Projector Electrical Specifications Rated frequency 50/60 Hz Power supply 100 to 240 VAC ±10% PowerLite 1760W : 3 to 1.
Power consumption PowerLite 1760W : (200 to 240 V) Operating: 278 W Standby: 0.44 W (Communication Off), 7.7 W (Communication On) PowerLite 1750/1770W/1775W : Operating: 304 W Standby: 0.
Supported Video Display Formats For best results, your computer monitor or video card resolution should be set to display in the projector's native resolution. However, your projector includes Epson's SizeWise chip that supports other computer display resolutions, so your image will be resized to fit automatically.
Display format Refresh rate (in Hz) Resolution (in pixels) TV (NTSC) 60 720 × 480 TV (PAL) 50/60 720 × 576 TV (SECAM) 50 720 × 576 Component video SDTV (480i) 60 720 × 480 SDTV (576i) 50 720 × 57.
** Wide resolution only Parent topic: Technical Specifications 160.
Notices Check these sections for important notices about your projector. Important Safety Information Important Safety Instructions FCC Compliance Statement Trademarks Software Copyright Copyright Notice Important Safety Information Caution: Never look into the projector lens when the lamp is turned on; the bright light can damage your eyes.
• If the projector is mounted on a ceiling, it should be installed by qualified technicians using mounting hardware designed for use with this projector. • When installing or adjusting a ceiling mount, do not use adhesives to prevent the screws from loosening and do not use oils or lubricants.
• Except as specifically explained in this manual, do not attempt to service this product yourself. Refer all servicing to qualified personnel. Opening or removing covers may expose you to dangerous voltages and other hazards. • Never open any covers on the projector except as specifically explained in this manual.
• If the lamp breaks, ventilate the room to prevent gases contained in the lamp from being inhaled or coming in contact with your eyes or mouth. • If the projector is mounted overhead and the lamp breaks, be careful to prevent pieces of glass from falling into your eyes when you open the lamp cover.
For Canadian Users This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le materiel brouilleur du Canada.
If you desire to receive the source code of the GPL Programs, please see the "EPSON Projector Contact List" in the User's Guide, and contact the customer support of your region. These GPL Programs are WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
When we speak of free software, we are referring to freedom, not price. Our General Public Licenses are designed to make sure that you have the freedom to distribute copies of free software (and charg.
absence of any warranty; and give any other recipients of the Program a copy of this License along with the Program. You may charge a fee for the physical act of transferring a copy, and you may at your option offer warranty protection in exchange for a fee.
a) Accompany it with the complete corresponding machine-readable source code, which must be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange;.
7. If, as a consequence of a court judgment or allegation of patent infringement or for any other reason (not limited to patent issues), conditions are imposed on you (whether by court order, agreement or otherwise) that contradict the conditions of this License, they do not excuse you from the conditions of this License.
NO WARRANTY 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT H.
You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. Also add information on how to contact you by electronic and paper mail.
LGPL Programs glibc-2.10 SDL-1.2.13 SDL-Image The GNU Lesser General Public License Version 2 is as follows. You also can see the GNU Lesser General Public License Version 2 at http://www.gnu.org/licenses/. GNU LESSER GENERAL PUBLIC LICENSE Version 2.
recipients, so that they can relink them with the library after making changes to the library and recompiling it. And you must show them these terms so they know their rights.
The precise terms and conditions for copying, distribution and modification follow. Pay close attention to the difference between a "work based on the library" and a "work that uses the library". The former contains code derived from the library, whereas the latter must be combined with the library in order to run.
b) You must cause the files modified to carry prominent notices stating that you changed the files and the date of any change. c) You must cause the whole of the work to be licensed at no charge to all third parties under the terms of this License.
complete corresponding machine-readable source code, which must be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange.
and then relink to produce a modified executable containing the modified Library. (It is understood that the user who changes the contents of definitions files in the Library will not necessarily be able to recompile the application to use the modified definitions.
9. You are not required to accept this License, since you have not signed it. However, nothing else grants you permission to modify or distribute the Library or its derivative works. These actions are prohibited by law if you do not accept this License.
Each version is given a distinguishing version number. If the Library specifies a version number of this License which applies to it and "any later version", you have the option of following the terms and conditions either of that version or of any later version published by the Free Software Foundation.
<one line to give the library's name and a brief idea of what it does.> Copyright ©) <year> <name of author> This library is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation; either version 2.
Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: 1. Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.
In plain English: 1. We don't promise that this software works. (But if you find any bugs, please let us know!) 2. You can use this software for whatever you want. You don't have to pay us. 3. You may not pretend that you wrote this software.
The Unix configuration script "configure" was produced with GNU Autoconf. It is copyright by the Free Software Foundation but is freely distributable. The same holds for its supporting scripts (config.guess, config.sub, ltconfig, ltmain.sh).
libpng version 1.2.6, September 12, 2004, is Copyright ©) 2004 Glenn Randers-Pehrson, and is distributed according to the same disclaimer and license as libpng-1.2.5 with the following individual added to the list of Contributing Authors Cosmin Truta libpng versions 1.
For the purposes of this copyright and license, "Contributing Authors" is defined as the following set of individuals: Andreas Dilger Dave Martindale Guy Eric Schalnat Paul Schmidt Tim Wegner The PNG Reference Library is supplied "AS IS".
zlib This projector product includes the open source software program "zlib" which applies the terms and conditions provided by owner of the copyright to the "zlib". The "zlib" are WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
libmd5-rfc This projector product includes the open source software program "libmd5-rfc" which applies the terms and conditions provided by owner of the copyright to the "libmd5-rfc". The "libmd5-rfc" are WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
1999-10-18 lpd Fixed typo in header comment (ansi2knr rather than md5); added conditionalization for C++ compilation from Martin Purschke <purschke@ bnl.
"Derivative Works" shall mean any work, whether in Source or Object form, that is based on (or derived from) the Work and for which the editorial revisions, annotations, elaborations, or other modifications represent, as a whole, an original work of authorship.
©) You must retain, in the Source form of any Derivative Works that You distribute, all copyright, patent, trademark, and attribution notices from the Source form of the Work, excluding those notices.
stoppage, computer failure or malfunction, or any and all other commercial damages or losses), even if such Contributor has been advised of the possibility of such damages.
Neither Seiko Epson Corporation nor its affiliates shall be liable to the purchaser of this product or third parties for damages, losses, costs, or expenses incurred by purchaser or third parties as a result of: accident, misuse, or abuse of this product or unauthorized modifications, repairs, or alterations to this product, or (excluding the U.
Een belangrijk punt na aankoop van elk apparaat Epson 1750 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Epson 1750 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Epson 1750 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Epson 1750 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Epson 1750 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Epson 1750 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Epson 1750 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Epson 1750 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.