Gebruiksaanwijzing /service van het product Stylus Color 900N van de fabrikant Epson
Ga naar pagina of 125
Epson America, Inc. Stylus COLOR 900N User’s Guide.
Copyright Notice All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of SEIKO EPSON CORPORATION.
FCC Compliance Statement For United States Users This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
i Contents INTRODUCTION 1 How to Use Your Documentation 2 Warnings, Cautions, Notes, and Tips 3 Windows/PC System Requirements 4 Macintosh System Requirements 5 ENERGY STAR Compliance 6 Year 2000 Read.
ii Configuring for AppleTalk 44 Configuring for NetBEUI 46 INSTALLING THE PRINTER DRIVER ON THE WORKSTATIONS 49 Installing the Printer Driver 49 Installing in Windows 98, Windows 95, or Windows NT 4.
iii Replacing an Ink Cartridge 80 Removing and Installing Ink Cartridges 81 Replacing an Outdated Ink Cartridge 83 Aligning the Print Head 85 Cleaning the Printer 86 Transporting the Printer 87 PROBLE.
iv Installing the Printer Driver in Windows 110 Installing the Printer Driver in Macintosh 111 INDEX 113 StartTOC.fm Page iv Friday, February 19, 1999 3:59 PM.
1 Introduction Your EPSON Stylus ® COLOR 900N Professional Series printer/print server is the ideal output device for business graphics, digital photographs, and more. You can print anything from reports and resumes to photos and greeting cards with fabulous results.
2 How to Use Your Documentation This Start Here book explains how to set up your printer and covers basic printing and maintenance procedures. It contains the following information: Setting U p Y our P rinter explains how to set up your printer and connect it to the network.
3 Warnings, Cautions, Notes, and Tips Please follow these guidelines: Warnings must be followed carefully to avoid bodily injury. Cautions must be observed to avoid damage to your equipment. Notes contain important information about your printer. Tips contain additional hints for better printing.
4 Windows/PC System Requirements To use your printer and its software with a PC, your system should have: ■ An IBM ® compatible PC with at least a 386/25 (for Windows 3.1x), 486/25 MHz (for Windows 95 or Windows NT ® 4.0), or 486/66 MHz (for Windows 98) processor ■ DOS, Microsoft ® Windows 3.
5 Macintosh System Requirements To use your printer and its software with a Macintosh, your system should have: ■ One of the following Macintosh models: LC475, LC575, LC630 Macintosh Quadra ® serie.
6 E NERGY S TAR Compliance As an E NERGY S TAR Partner, EPSON has determined that this product meets the E NERGY S TAR guidelines for energy efficiency.
7 About Your Software The printer software CD-ROM includes all the software you need for configuring your printer and printing: ■ The EPSON Net!2 utility (for Windows 98, Windows 95, Windows NT 4.0, and Macintosh) allows you to configure your printer for protocols including Novell ® NetWare ® , TCP/IP, and AppleTalk ® .
8 Important Safety Instructions Before using your printer, read the following safety instructions to make sure you use the printer safely and effectively: ■ Turn off and unplug the printer before cleaning. Clean with a damp cloth only. Do not spill liquid on the printer.
9 ■ Unplug the printer and refer servicing to qualified service personnel under the following conditions: If the power cord or plug is damaged; if liquid has entered the printer; if the printer has been dropped or the case damaged; if the printer does not operate normally or exhibits a distinct change in performance.
10 Intro.fm Page 10 Friday, February 19, 1999 4:00 PM.
11 Setting Up Your Printer This chapter describes how to set up your printer by doing the following: ■ Unpack the printer ■ Attach the paper support ■ Install the ink cartridges ■ Load paper .
12 Attach the Paper Support Insert the paper support into the slots at the back of the printer’s sheet feeder. Put the printer near an available grounded outlet, but avoid areas: ■ With high tempe.
13 Install the Ink Cartridges 1. Make sure the printer is turned off (the P power button should be up). Then plug the printer’s power cord into a grounded outlet. Don’t use an outlet controlled by a wall switch or timer, or one that uses the same circuit as a large appliance.
14 3. Lower the printer’s output tray and open the cover. 4. Press the P power button to turn on the printer. The P power light flashes and the B and A ink out lights come on. The black ink cartridge holder moves slightly left to the loading position.
15 6. Place the black ink cartridge in the holder with the label facing up and toward the back of the printer, as shown. Then close the clamp, making sure it clicks into place. If ink gets on your hands, wash them thoroughly with soap and water. If ink gets in your eyes, flush them immediately with water.
16 Load Paper 1. Open the output tray extensions. Slide the left edge guide right until it is a little wider than your paper. 2. Load a stack of plain paper with the printable side up and place it against the right edge guide. Then slide the left edge guide to the paper’s left edge.
17 Connect the Printer to Your Network Connect your printer to an Ethernet twisted-pair (10BaseT or 100BaseTX) network connection. 1. Attach the network cable to the connector on the card. 2. To initialize the card, turn on the printer while pressing down the status sheet button.
18 setup.fm Page 18 Friday, February 19, 1999 4:00 PM.
19 Configuring the Printer for the Network See the table below to find your network configuration (operating system and protocol), and determine what to install and where to find instructions for configuring your network. For many operating systems, you can change configuration settings using the Ethernet card’s internal home page.
20 * To use the Ethernet card home page, you must have TCP/IP setup on your network, as well as either Microsoft Internet Explorer 4.0 or later, or Netscape Navigator TM 3.0 or later. ** If you have a Windows NT 4.0 Server network, you may need to install the driver only on the server.
21 Install the Network Software To configure the Ethernet card, you need to install the network software (EPSON Net!2) on only one workstation or on the server, depending on your network.
22 Installing EPSON Net!2 in Windows 1. Insert the printer software CD-ROM in your drive. You see the EPSON Installation Program screen: If the screen does not appear, go to My Computer and double-click the Epson CD-ROM icon to start the EPSON Installation program.
23 Installing EPSON Net!2 on a Macintosh 1. Create a folder for EPSON Net!2 on your hard disk. 2. Insert the printer software CD-ROM in your CD-ROM drive. 3. Copy EPSON Net!2 to the folder you created. After you install EPSON Net!2, use it to configure your printer for AppleTalk, following the steps on page 44.
24 Follow these steps to install Status Monitor 2: 1. Insert the printer software CD-ROM. You see the following screen: If the screen does not appear, type D :EPSETUP (where D : is the drive letter of your CD-ROM) and click OK to start the EPSON Installation program.
25 7. Select Monitor to monitor EPSON network printers that do not have drivers on your computer. Select Do not monitor if network traffic is a problem.
26 If you are not using EPSON Net!2 on your computer, you do not have to turn off background monitoring. (You should limit the number of systems that monitor the printer, however, to prevent network traffic problems.) Configuring for NetWare You can configure the printer for NDS or bindery with NwAdmin and EPSON Net!2.
27 Follow these steps to set up your printer: 1. Log in to the NDS tree (or to the server with bindery context) with admin or supervisor privileges. 2. Run the administrator tool (NwAdmin). 3. Create a printer: Click the directory context icon (or bindery context), and select Object , Create , and then Printer .
28 5. Create a print queue: Click the directory context icon (or bindery context), and select Object , then Create , and then Print Queue . Type the print queue name and select the print queue volume. Then click Create . The objects you have just created are added to the NDS tree (or bindery).
29 7. The Printer dialog box appears. Click Assignments and then click Add . 8. From the print queue list, select the queue you want to assign and click OK . 9. For Print Server mode, go to step 11. For Remote Printer mode, click Configuration , select Other/Unknown for the Printer type box and click OK .
30 10. Double-click the print server object icon on the NetWare Administrator screen. 11. The Print Server dialog box appears. Click Assignments and then click Add . 12. From the printer object list, select the printer object you want to assign and click OK .
31 13. For Print Server mode, go to step 14. For Remote Printer mode, go back to the screen in step 11 and click the Printer Number button to set up the printer number from 0 to 254. 14. Double-click the print queue object icon on the NetWare Administrator screen.
32 15. The Print Queue dialog box appears. Click Assignments . Check that the print server and the printer are assigned to the queue. You now need to use EPSON Net!2 to configure the card: ■ For Print Server mode, see the section below. ■ For Remote Printer mode, go to page 36.
33 Using EPSON Net!2 to Configure the Card in Print Server Mode Once you have set up the printer in NwAdmin or PCONSOLE, you can configure the printer with EPSON Net!2, as described below. If the Status Monitor 2 utility is running, or if background monitoring is turned on, it may interfere with EPSON Net!2.
34 3. Click the NetWare Basic tab and make the following settings: Frame type Select one of the following: Auto , Ethernet 802.2 , Ethernet 802.3 , Ethernet II , or SNAP . Mode Select Print Server . NDS Select Enable or Disable . NDS Tree name If you are using NDS mode, type the same name as you used in NwAdmin (up to 31 characters).
35 See your NetWare manual for the available characters and number of characters you can use. 4. Click the Print Server tab and make the following settings: Primary file server name Select the server where you created the queue. Password Type any new password up to 19 characters.
36 6. In the file Server Console’s MONITOR.NLM, select the Connection Information. Check if the print server name assigned to the Ethernet card has been logged in to the Active Connections list.
37 2. Start EPSON Net!2. The following screen appears: 3. Highlight your printer and click Configuration . 4. Click the NetWare Basic tab and make the following settings: Frame type Select one of the following: Auto , Ethernet 802.2 , Ethernet 802.3 , Ethernet II , Ethernet SNAP .
38 NDS Select Enable or Disable . NDS Tree name If you are using NDS mode, type the same name (up to 31 characters) as you set in NwAdmin. NDS Context NDS context is the Object rank in the Directory tree. Type the container object (up to 255 characters) from the Object to the Root.
39 6. Click OK to save changes. If the message “Configuration is successfully done” appears on your screen, the update is complete. 7. Select Printer Status from the Console screen of the print server. Then check the status. 8. Select Queues serviced .
40 Follow these steps to assign an IP address: 1. Make sure Windows is running, the Ethernet card is connected to the network, and the printer is turned on. 2. Click Start , point to Programs , point to EPSON Net!2 , then click EPSON Net!2 . 3. Click the printer where you want to set the IP address, and then click the Configuration button.
41 4. Click the TCP/IP tab to display the TCP/IP menu. 5. For The way of acquiring an IP address , select one of the following: Manual , RARP , BOOTP , or DHCP . To use RARP, BOOTP, or DHCP, a server for each protocol is necessary. If there is no corresponding server, do not use any of these settings.
42 7. Click OK to save the new settings. The update is complete when the message “Configuration is successfully done” appears. (After you click OK , wait a few minutes before turning off the printer, so the settings have time to reach the card.
43 7. Type in the following command to set up the routing table: ping 11.22.33.44 8. Add an entry in the ARP table that assigns an IP address to the hardware address of the Ethernet card. Use the following command: arp -s <IP address> <MAC address> For example: arp -s 192.
44 Before you can print using TCP/IP, you still need to do the following on each computer that will use the printer: ■ Install the printer driver (see page 49) ■ Add a printer port (see page 51) See page 46 if you need to enable NetBEUI on the Ethernet card.
45 2. Highlight Stylus COLOR 900 and click Configuration . The IP Address Configuration and AppleTalk Configuration dialog box appears. 3. Make the following settings in the AppleTalk Configuration box. Printer Name Type the printer name (up to 31 characters).
46 4. Click the Send button to save the new settings to the Ethernet card. If the message “Configuration is successfully done” appears, the update is complete. Configuring for NetBEUI You can use NetBEUI in Windows networks to print to your EPSON Stylus COLOR 900N.
47 2. Click NetBEUI under Network on the Configuration menu. The NetBEUI setting screen appears. 3. Select Enable in order to use NetBEUI. If Disable is on, all NetBEUI related functions stop. The NetBIOS name is the name of your computer on the network.
48 6. If the message “Configuration change is complete!” appears on your screen, the update is complete. Enable the changes by pressing RESET or turning your printer off and on.
49 Installing the Printer Driver on the Workstations This chapter describes how to install the printer driver. For Windows computers, you need to change the port settings and for Macintosh computers, you need to select the printer in the Chooser.
50 Installing in Windows 98, Windows 95, or Windows NT 4.0 1. Insert the printer software CD-ROM. You see the EPSON Installation Program screen: If you do not see the screen, click Start , Run , and type D :EPSETUP (where D : is the drive letter of your CD-ROM).
51 Changing Your Port Setting Follow the steps below to change the port setting. In Windows NT 4.0, make sure the TCP/IP Print Server service is running before you start. 1. Click Start , point to Settings , and click Printers . 2. Right-click the EPSON Stylus COLOR 900N printer icon.
52 Changing Your Port Setting Follow these steps to change the port setting under Windows 3.1x: 1. Open the Print Manager and select EPSON Stylus COLOR 900N from the list of printers.
53 Printing a Test Page If you have a Windows 98, Windows 95, or Windows NT 4.0 workstation, follow the steps below to test the printer and make sure that the network is working correctly. Make sure the printer is turned on and a sheet of letter-sized paper is loaded.
54 clients.fm Page 54 Friday, February 19, 1999 4:01 PM.
55 Installing and Using Your Electronic Manual This chapter describes how to install the EPSON Stylus COLOR 900N Manual on your hard disk and how to view the manual using Adobe Acrobat Reader.
56 Installing Acrobat Reader Follow the instructions below to install Acrobat Reader on your hard disk, if necessary: ■ Windows 95, Windows 98, and Windows NT: Insert the printer software CD-ROM into your CD-ROM drive. When you see the Installation Program screen, select Install Adobe Acrobat Reader and click the right arrow button .
57 Navigating an Electronic Manual When you open an electronic manual, you’ll see this toolbar: There are several ways to navigate through electronic manuals: ■ Click on hot topics, which are usually underlined or displayed in a different color. To find out if a topic is hot, move your cursor over it.
58 manual.fm Page 58 Friday, February 19, 1999 4:01 PM.
59 Basic Printing This chapter describes what you need to do to print a basic document—such as a memo, newsletter, or photograph—from loading the paper to selecting print settings to controlling print jobs.
60 Printing with Windows 1. Make sure your printer and computer are turned on. 2. Load a stack of plain paper with the printable side up and place it against the right edge guide. Then slide the left edge guide against the paper’s left edge, making sure the stack is lower than the arrow on the guide.
61 6. If your application’s Print dialog box contains a Properties button, click Properties and go to step 7. If you see a Setup , Printer , or Options button, click it. Then click Properties on the next screen. In Windows 3.1, you won’t see a Properties button; just click Setup , Printer , or Options until you see the window in step 7.
62 8. Check the following settings: ■ Make sure the Media Type is set to Plain paper . (If you load a different type of paper, select the corresponding Media Type for it, as described on page 76. For instructions on loading special paper, see page 73.
63 10. Click the Layout tab (not available with Windows 3.1) if you want to reduce or enlarge your printed image, print multiple pages on one sheet of paper, or add a watermark. 11. Click OK until you see the Print dialog box again. 12. Click OK to start printing.
64 Printing with a Macintosh 1. Make sure your printer and Macintosh are turned on. 2. Load a stack of plain paper with the printable side up and place it against the right edge guide. Then slide the left edge guide against the paper’s left edge, making sure the stack is lower than the arrow on the guide.
65 6. Now open the File menu and choose Print . You see the main printer settings dialog box: 7. Check the following settings: ■ Make sure the Media Type is set to Plain Paper . (If you load a different type of paper, select a corresponding Media Type for it, as described on page 76.
66 8. Click the Layout icon if you want to reduce or enlarge your printed image, print multiple pages on one sheet of paper, or add a watermark. 9. Click the Background Printing icon if you want to prioritize or schedule your print job for printing. 10.
67 11. Click Print to start printing. If you turned on background printing, you see the EPSON Monitor3 dialog box to show you the print job’s progress. You can cancel , pause , or restart your print jobs as necessary. For more information on printing, see the electronic EPSON Stylus COLOR 900N Manual .
68 Follow these steps to print with custom project types: 1. Create your image or document in your application software. 2. Access the printer settings dialog box as described in “Printing with Windows” on page 60 or “Printing with a Macintosh” on page 64.
69 Always choose your Media Type and Ink setting before you select a custom project type. Some project types may not be available with the Media Type or Ink settings you choose. Printing with PhotoEnhance3 or PhotoEnhance ™ may take longer on some systems and images.
70 Using the Advanced Dialog Box For maximum control over your project, you can customize your print settings and special effects. You can even save your custom settings as a group so you can use them whenever you print a similar project. For more information, see your electronic EPSON Stylus COLOR 900N Manual .
71 3. Choose the Media Type and Ink settings you want to use. These settings are the same as the ones you selected on the main printer settings dialog box. You can change them here as you customize your settings, if needed. The available Print Quality settings may be limited by the Media Type you choose.
72 7. Select a color management system (the availability depends on your operating system): ■ Color Adjustment mode lets you choose just the level of adjustment you need, from Automatic mode to No Color Adjustment (for using other color management software).
73 Using Special Papers How can you get the best-looking photos, most vivid colors, and sharpest text? Always use EPSON’s special ink jet papers. To show you how much difference EPSON paper can make, we’ve included some free samples. Check out the EPSON Photo Paper Pack that came with your printer.
74 If you’re using 4 × 6-inch Photo Paper, follow these steps: 1. Load the paper against the right edge guide with the glossy side facing up and the perforated margins positioned as shown: You can load up to 20 sheets of 4 × 6-inch Photo Paper at a time.
75 Envelopes You can load up to 10 envelopes at a time. Load the envelope flap edge first and printable side up. Place it against the right edge guide and adjust the left edge guide as shown here. You may get better results if you press each envelope flat before loading it, or try loading one envelope at a time.
76 Selecting the Correct Media Type When you print on special media, you need to be careful about choosing the correct Media Type setting in your printer software. Check the table below if you’re not sure which setting to choose. For details on loading special media, see your electronic EPSON Stylus COLOR 900N Manual .
77 Maintaining Your Printer This section describes the most common maintenance procedures you’ll need to perform to keep your printer working at its best and to prepare it for moving.
78 Using the Head Cleaning Utility Follow these steps to run the Head Cleaning utility: 1. Make sure the printer is turned on but not printing, and both the B black and A color ink out lights are off. 2. Access the printer settings dialog box as described in “Printing with Windows” on page 60 or “Printing with a Macintosh” on page 64.
79 Using the Control Panel Follow these steps to clean the print head using the control panel: 1. Make sure the printer is turned on but not printing, and both the B black and A color ink out lights are off. 2. Press the R cleaning button and hold it down for three seconds.
80 Examining the Nozzle Check Pattern Examine the nozzle check pattern you print. It should look something like this: Each staggered horizontal and straight vertical line should be complete, with no gaps in the dot pattern. If your printout looks okay, you’re done.
81 When you need new ink cartridges, contact your dealer or call EPSON Accessories at (800) 873-7766 or visit our web site at www.epsonsupplies.com (U.
82 To avoid damaging the printer, never move the print head by hand. Don’t open the clamp or remove a cartridge except to replace it with a new one. Once you remove a cartridge, you can’t reuse it, even if it contains ink. 5. Pull up the ink cartridge clamp.
83 Replacing an Outdated Ink Cartridge If an ink cartridge is more than six months old, you may need to replace it. How can you tell? You may notice that your printouts don’t look as good as they used to. If print quality doesn’t improve after cleaning and aligning the print head, you can replace one or both cartridges.
84 6. Pull up the ink cartridge clamp. The cartridge rises up from its holder. 7. Lift the cartridge out of the printer and dispose of it carefully. If ink gets on your hands, wash them thoroughly with soap and water. If ink gets into your eyes, flush them immediately with water.
85 Aligning the Print Head If your printouts contain misaligned vertical lines, you may need to align the print head. If you are using DOS, follow the instructions in your electronic EPSON Stylus COLOR 900N Manual instead. Follow these steps: 1. Make sure the printer is turned on and letter-size paper is loaded.
86 Cleaning the Printer To keep your printer working at its best, you should clean it several times a year. Follow these steps: 1. Turn off the printer, unplug the power cord, and disconnect the network cable. 2. Remove all the paper from the sheet feeder.
87 Transporting the Printer If you move your printer some distance, you need to prepare it for transportation in its original box. Follow these steps: To avoid damage, always leave the ink cartridges installed when transporting the printer. Be sure to remove the tape used in step 4 after installing the printer in its new location.
88 maint.fm Page 88 Friday, February 19, 1999 4:02 PM.
89 Problem Solving This section gives you the basics for diagnosing and solving printer problems. First see “Diagnosing Printer Problems” below to help determine what the cause of the problem may be. Then see “Problems and Solutions” on page 92 for solutions to common setup and software problems.
90 Follow these guidelines when the control panel lights come on or flash: P is on The P power light is on when the printer is on and ready to print. It flashes when the printer is receiving a print job or performing a maintenance operation, such as cleaning the print head.
91 Running a Printer Check You can run a printer check to determine whether the problem comes from the printer itself or some other source. Follow these steps to run the printer check: 1. Make sure both the printer and computer are turned off. 2. Disconnect the interface cable from the printer.
92 Problems and Solutions Here are some basic troubleshooting tips if you have any problems setting up your printer, installing software, or getting good print quality. Problems Setting Up the Printer or Installing Its Software If you installed the ink cartridges and the printer started making noise .
93 If your printer icon doesn’t appear in the Chooser (Macintosh) . . . ■ Your Macintosh has extension conflicts. Disable Quick Draw GX in the Extensions Manager. Make sure AppleTalk and SC 900 (AT) are enabled, and then restart your Macintosh. Also, make sure your AppleTalk connection is set to Ethernet.
94 ■ Make sure the Media Type setting matches the paper you loaded. See page 76 for guidelines. ■ Make sure the printable side of the paper is face up. It is usually the whiter or shinier side of ink jet paper. ■ Make sure the ink cartridges aren’t low on ink.
95 For most papers, set the paper thickness lever to the 0 position. If your printout is blurry or smeared . . . ■ Make sure your paper isn’t damp or loaded face down (the printable side should be loaded face up). If it’s damp, reload a new stack of paper.
96 If your printout is faint or has gaps in the image . . . ■ Make sure the print head nozzles are not clogged. To clean the print head, see page 77. ■ Make sure your paper isn’t damaged, old, dirty, or loaded face down. If it is, reload a new stack of paper with the printable side up.
97 If your printout contains incorrect characters . . . ■ Your printer’s network cable may not be securely connected. Check that the cables are connected correctly at all places between your computer and the printer on the network to ensure proper communication.
98 Windows 98 and Windows 95 Follow the steps below to uninstall the printer driver. If you are using Status Monitor 2 and uninstall and then reinstall the printer driver software, you must either run.
99 Macintosh 1. Insert the EPSON printer software CD-ROM in your drive. 2. Double-click the Installer icon. Then click Continue . 3. Click the arrow in the list at the top showing Easy Install, and select Remove from the list. 4. Click the Remove button on the bottom of the screen.
100 Uninstalling EPSON Net!2 Follow these steps to uninstall EPSON Net!2 in Windows: 1. Double-click the My Computer icon, then double-click the Control Panel icon. 2. Double-click Add/Remove Programs . 3. Select EPSON Net!2 in the program list. 4. Click the Add/Remove button.
101 To speak to a technical support representative, dial (310) 787-6346 (U.S.) or (905) 709-2567 (Canada), 6 AM to 8 PM , Pacific Time, Monday through Friday and 7 AM to 4 PM , Saturday.
102 trouble.fm Page 102 Friday, February 19, 1999 4:0 3 PM.
103 Installing Software From Diskettes If you need to install the printer software on a system that doesn’t have a CD-ROM drive (such as a workstation), use the instructions in this chapter to do on.
104 1. Insert the printer software CD-ROM in your CD-ROM drive and a blank, formatted diskette in the diskette drive. You see the EPSON Installation Program screen: If the screen does not appear, go to My Computer and double-click the Epson CD-ROM icon to start the EPSON Installation program.
105 4. Click Next . You see a screen similar to the following: 5. Click Copy to copy the first diskette. You see a screen showing the progress as the files are copied to the diskette. For multiple diskettes, when the first diskette is finished, the installer prompts you to insert disk 2.
106 Copying Macintosh Files If you have a Macintosh computer and you need to create diskettes, use a computer that has a CD-ROM drive to drag the following files from your CD-ROM onto diskettes (1 per.
107 ■ Daytime telephone number ■ Payment method (VISA, MasterCard, or American Express) Card number and expiration date Be sure to sign your fax; it is required for the credit card purchase ■ Printer name (EPSON Stylus COLOR 900N) ■ Operating system (Window 3.
108 Installing EPSON Net!2 on a Macintosh Follow these steps: 1. Create a folder for EPSON Net!2 on your hard disk. 2. Insert the EPSON Net!2 diskette in your drive. 3. Double-click the diskette to open it and copy EPSON Net!2 to the folder you created.
109 3. Type A:SETUP and click OK . 4. Close any open programs and click Next . A screen appears asking where you want to install Status Monitor 2. 5. Click Next to accept the default directory or choose a different directory and click Next .
110 13. Follow steps 2 through 10, using the same settings you used in those steps. 14. When the Setup Complete screen appears, select Yes and click Finish . 15. After you restart your computer, right-click the green background monitoring icon in your Startup group on the taskbar.
111 Installing the Printer Driver in Macintosh Follow these steps to install your printer driver: 1. Turn on your printer and your Macintosh and turn off any virus protection programs you may have. 2. Insert the diskette in your drive and double-click the diskette icon that appears.
112 diskette.fm Page 112 Friday, February 19, 1999 4:03 PM.
113 Index 360 dpi Ink Jet Paper, 76 A Accessories, 101 Adobe Acrobat Reader, 55 to 57 Advanced mode, 70 to 72 Advanced settings print quality, 70 to 72 project types, 67 to 69 special effects, 70 to 7.
114 Ethernet card MAC address, 17 Ethernet card home page, 46 to 48 F Faint images, 96 Finest Detail setting, 71 Flip Horizontal setting, 71 G Gateway, 41 Graph setting, 69 H Halftoning setting, 71 He.
115 Preview, Macintosh, 66 Print head aligning, 85 cleaning, 77 to 79 Print quality, 71, 93 to 97 Printable area setting, Photo Paper, 74 Printer cable, 4, 5 noise, 92 parts, 6 Printer software, unins.
116 Windows Progress Meter, 63 system requirements, 4 using diskettes, 103 to 110 Workgroup name, 47 World Wide Web, 101 Y Year 2000, 6 StartIX.fm Page 116 Friday, February 19, 1999 4:03 PM.
1 EPSON Ink Jet Papers Use EPSON’s paper and inks to get the same photo quality results that have earned your printer all of its awards! EPSON’s papers are specially coated to work with EPSON’s quick drying inks. You’ll notice that when prints come out of your printer, you can immediately handle them.
79 How to Order EPSON Ink and Paper To order EPSON ink cartridges, paper, and other printing media, contact your dealer or call EPSON Accessories at (800) 873-7766 or visit our web site at www.epsonsupplies.com (U.S. sales only). In Canada, please call (800) 873-7766 for dealer referral.
Een belangrijk punt na aankoop van elk apparaat Epson Stylus Color 900N (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Epson Stylus Color 900N heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Epson Stylus Color 900N vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Epson Stylus Color 900N leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Epson Stylus Color 900N krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Epson Stylus Color 900N bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Epson Stylus Color 900N kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Epson Stylus Color 900N . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
