Gebruiksaanwijzing /service van het product EN-7522C van de fabrikant EverFocus
Ga naar pagina of 56
Instruction Manual EN-7522C 22” Wide Screen TFT-LCD Monitor.
Please read this manual thoroughly before use, and keep i t handy for future reference. SAFETY INSTRUCTION ……………………………………………… ………………….. 2 ~ 3 CAUTIONS ……………………………………………………………… .
INSTRUCTION MANUA L ………………………………………………………… …………. 1 Import ant Safety Instruction 1. Read these instructions. 2. Keep these Instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water .
13. Unplug this apparatus during lightning storms or when unused for long periods of time. 14. Refer all servicing to qualified service personnel . Servicing is required when the apparatus has been da.
This symbol is intended to alert the user to the presence of uninsulated : dangerous voltage with in the product’s enclosure that may be of suffici ent magnitude to constitute a risk of electric shock to pe rsons.
NEVER REMOVE THE BACK COVER Removal of t he back cover should be carried out only by qual ified person nel. DO NOT USE IN HO S TI LE ENVIRONME NT S To prevent shock or fire hazard, do not expose the unit to rain or moist ure. This unit is designed to be used in the office or home.
communications. However, there is no guarantee that interferenc e will not occur in a parti cular installation. If this equipment does ca use harmful interference to radio or t elevision reception whi.
A. BOTTOM PANEL CONTROL 1. VIDEO2(AV2) OU T 2. VIDEO2(AV2) IN 3. VIDEO1(AV1) OU T 4. VIDEO1(AV1) IN 5. TRIGGER INPUT 6, 7. AUDIO IN(R+L) for AV1, AV2 and S-VIDEO 8. S-VIDEO(Y/C) IN 9. AUDIO OUT(Speaker) 10. PC STEREO IN 11. VGA(D-SUB) IN 12. DVI IN 13.
B. REMOTE CONTROLLER(Option) 1. POWER ( ) Turn the power ON or OFF. There will be a few seconds delay before the display appears. 2. SOURCE Select pc or video(AV1/AV2/S-Video/HDMI/DVI/PC) sources. 3. AUTO Auto g eomet ry adj ust ment in PC Sour ce. 4.
C. FRONT KEY CONTROL 1. SOURCE / Select PC or video. Select On Screen Disp lay menu. 2. MENU/EXIT Activate and exit the On Screen Display. 3, 4. AUTO/ ▼ , ▲ These buttons allow user to enter the sub-menu of the activated function. The up( ▲ ) button is HOLD function and stop the Tri gger & Auto switching functions.
8 ……………………………………………………………………. INSTRUCTION MA NUAL OSD MENU DESCRIPTION A: Custom Menu (Only Video Input) 1) Press the MENU button and then press the up( ▲ ) or down( ▼ ) button to s elect the Custom.
INSTRUCTION MANUA L ………………………………………………………… …………. 9 A: Custom Menu (For RGB-PC & HDMI Inp ut ) 1) Press the MENU button and then press the up( ▲ ) or down( ▼ ) button to s elect the Custom. 2) Press the up( ▲ ) or down( ▼ ) button to select the sub menu.
10 ……………………………………………… ……………………. INSTRUCTION MANUAL B. Picture / Sound Menu (Only Video Input) 1. Picture Mode.
1) Press the MENU button and then press the up( ▲ ) or down( ▼ ) button to s elect the Picture / Sound. 2) Press the right( ▶ ) or SOURCE/ button. 3) Press the up( ▲ ) or down( ▼ ) button to select the Pic ture Mode. 4) Press the right( ▶ ) or SOURCE/ button.
INSTRUCTION MANUAL …… ………………………………………………………………. 11 2-1. Color Tone 1) Press the up( ▲ ) or down( ▼ ) button to select the Color Tone.
3) Press the right( ▶) or SOURCE/ button again. 4) Press the up( ▲ ) or down( ▼ ) button to select the Color Tone option. 5) Press the MENU button to save. 12 ……………………………………………… ……………………. INSTRUCTION MANUAL 2-2.
1) Press the up( ▲ ) or down( ▼ ) button to select the User. 2) Press the MENU button. 3) Press the up( ▲ ) or down( ▼ ) button to select the User option. 4) Press the left(◀) or right( ▶ ) button to adjust the Red, Green or Blue setting. 5) Press the MENU button to save.
INSTRUCTION MANUAL …… ………………………………………………………………. 13 3. Mute 1) Press the up( ▲ ) or down( ▼ ) button to select the Mute. 2) Press the right( ▶ ) or SOURCE/ button. 3) Press the up( ▲ ) or down( ▼ ) button to select the On or Off.
14 ……………………………………………… ……………………. INSTRUCTION MANUAL 4. Volume 1) Press the up( ▲ ) or down( ▼ ) button to select the Volume 2) Press the left (◀) or right( ▶ ) button to adjust Volume setting.
INSTRUCTION MANUAL …… ………………………………………………………………. 15 5. Size 1) Press the up( ▲ ) or down( ▼ ) button to select the Size 2) Press the right( ▶) or SOURCE/ button.
3) Press the up( ▲ ) or down( ▼ ) button to select the Siz e option. 4) Press the MENU button to save. 16 ……………………………………………… …………………….
1) Press the up( ▲ ) or down( ▼ ) button to select the NR. 2) Press the right( ▶) or SOURCE/ button. 3) Press the up( ▲ ) or down( ▼ ) button to select the On or Off.
INSTRUCTION MANUAL …… ………………………………………………………………. 17 7. 3D Comb 1) Press the up( ▲ ) or down( ▼ ) button to select the 3D Comb. 2) Press the right( ▶) or SOURCE/ button. 3) Press the up( ▲ ) or down( ▼ ) button to select the On or Off.
18 ……………………………………………… ……………………. INSTRUCTION MANUAL B. Picture / Sound Menu (F or RGB-PC & HDMI Input) 1. Si z e 1) Press the up( ▲ ) or down( ▼ ) button to select the Size. 2) Press the right( ▶) or SOURCE/ button.
INSTRUCTION MANUAL …… ………………………………………………………………. 19 2. PC (Only RGB -PC Input ) 1) Press the up( ▲ ) or down( ▼ ) button to select the PC.
2) Press the right( ▶) or SOURCE/ button. 3) Press the up( ▲ ) or down( ▼ ) button to select the PC sub menu. 4) Press the right( ▶ ) or SOURCE/ button. 5) Press the left (◀) or right( ▶ ) button to adjust the PC setting. 6) Press the MENU button to save.
1) Press the MENU button and then press the up( ▲ ) or down( ▼ ) button to s elect the PIP. 1. PIP 1) Press the right( ▶ ) or SOURCE/ button. 2) Press up( ▲ ) or down( ▼ ) button to select the On or Off.
INSTRUCTION MANUAL …… ………………………………………………………………. 21 2. Input Source 1) Press the up( ▲ ) or down( ▼ ) button to select the Input Source. 2) Press the right( ▶ ) or SOURCE/ button. 3) Press the up( ▲ ) or down( ▼ ) button to select the Source option.
Main Sub RGB PC or HDMI RGB PC or HDMI 22 ……………………………………………… ……………………. INSTRUCTION MANUAL 3. PIP Mode 1) Press the up( ▲ ) or down( ▼ ) button to select the PIP Mode. 2) Press the right( ▶ ) or SOURCE/ button.
※ PBP1 Main image Sub image ※ PBP2 Main image Sub image INSTRUCTION MANUAL …… ……………………………………………………………….
1) Press the up( ▲ ) or down( ▼ ) button to select the Size. 2) Press the right( ▶ ) or SOURCE/ button. 3) Press the up( ▲ ) or down( ▼ ) button to select the Size option.
24 ……………………………………………… ……………………. INSTRUCTION MANUAL 5. Position 1) Press the up( ▲ ) or down( ▼ ) button to select the Posi tion. 2) Press the right( ▶ ) or SOURCE/ button. 3) Press the up( ▲ ) or down( ▼ ) button to select the Position option.
INSTRUCTION MANUAL …… ………………………………………………………………. 25 6. Swap 1) Press the up( ▲ ) or down( ▼ ) button to select the Swap. 2) Press the right( ▶ ) or SOURCE/ button to swap the main image for the sub one.
26 ……………………………………………… ……………………. INSTRUCTION MANUAL 7. Sound Select 1) Press the up( ▲ ) or down( ▼ ) button to select the Sound Sel ect.
2) Press the right( ▶ ) or SOURCE/ button. 3) Press the up( ▲ ) or down( ▼ ) button to select the Sound Select opti on. 4) Press the MENU button to save. INSTRUCTION MANUAL …… ……………………………………………………………….
1) Press the MENU button and then press the up( ▲ ) or down( ▼ ) button to sel ect the Setup. 1. Reset 1) Press the right( ▶ ) or SOURCE/ button 2) Press the right( ▶ ) or SOURCE/ button again. 3) Press SOURCE/ button to execute the reset. Reset : All settings go to the factory initialization.
2. Language 1) Press the up( ▲ ) or down( ▼ ) button to select the Language. 2) Press the right() or SOURCE/ button. 3) Press the up( ▲ ) or down( ▼ ) button to select language. 4) Press the MENU button to save. INSTRUCTION MANUAL …… ……………………………………………………………….
3. OSD Tone 1) Press the up( ▲ ) or down( ▼ ) button to select the OSD Tone. 2) Press the right() or SOURCE/ button 3) Press the up( ▲ ) or down( ▼ ) button to select the OSD Tone option. 4) Press the MENU button to save. 30 ……………………………………………… …………………….
4. Blue Screen 1) Press the up( ▲ ) or down( ▼ ) button to select the Blue Screen. 2) Press the right() or SOURCE/ button. 3) Press the up( ▲ ) or down( ▼ ) button to select the On or Off. 4) Press the MENU button to save. INSTRUCTION MANUAL …… ……………………………………………………………….
5. Key Lock 1) Press the up( ▲ ) or down( ▼ ) button to select the Key Lock. 2) Press the right() or SOURCE/ button 3) Press the up( ▲ ) or down( ▼ ) button to select the On or Off 4) Press the MENU button to save. 32 ……………………………………………… …………………….
6. Trigger 1) Press the up( ▲ ) or down( ▼ ) button to select the Trigger. 2) Press the right() or SOURCE/ button. 6-1. Trigger Enable 1) Press the up( ▲ ) or down( ▼ ) button to select the Trigger Enable. 2) Press the right() or SOURCE/ button.
6-2. Trigger Input 1) Press the up( ▲ ) or down( ▼ ) button to select the Trigger Input . 2) Press the right() or SOURCE/ button. 3) Press the up( ▲ ) or down( ▼ ) button to select the Trigger Input option. 4) Press the Menu button to save.
6-3. Buzzer 1) Press the up( ▲ ) or down( ▼ ) button to select the Buzzer. 2) Press the right() or SOURCE/ button. 3) Press the up( ▲ ) or down( ▼ ) button to select the On or Off. 4) Press the Menu button to save. INSTRUCTION MANUAL …… ……………………………………………………………….
6-4. Trigger Time 1) Press the up( ▲ ) or down( ▼ ) button to select the Trigger Ti me. 2) Press left() or right() button to adjust Trigger Time setting. 3) Press the MENU button to save. 36 ……………………………………………… …………………….
6-5 Trigger Option 1) Press the up( ▲ ) or down( ▼ ) button to select the Trigger Option. 2) Press the right() or SOURCE/ button. 3) Press the up( ▲ ) or down( ▼ ) button to select the Trigger Option setting. 4) Press the Menu button to save.
6-6. Display Type 1) Press the up( ▲ ) or down( ▼ ) button to select the Display Type. 2) Press the right() or SOURCE/ button. 3) Press the up( ▲ ) or down( ▼ ) button to select the Display Type option. 4) Press the Menu button to save. PIP & FULL: When the condition is below, the Trigger Input image will be displayed as PIP.
7. Auto switching 1) Press the up( ▲ ) or down( ▼ ) button to select the Auto switc hing. 2) Press the right() or SOURCE/ button. 7-1. Auto switching On/Off 1) Press the right() or SOURCE/ button. 3) Press the up( ▲ ) or down( ▼ ) button to select the On or Off .
7-2. Auto switching Input enabled 1) Press the up( ▲ )or down( ▼ ) button to select the Inputs enabled. 2) Press the right() or SOURCE/ button. 3) Press the up( ▲ ) or down( ▼ ) button to select the Input. 4) Press the right() or SOURCE/ button.
7-3. Auto switching Time 1) Press the up( ▲ ) or down( ▼ ) button to select the Time. 2) Press the left() or right() button to adjust the Time setting. 3) Press the MENU button to save. INSTRUCTION MANUAL …… ……………………………………………………………….
Using the VESA standard wal l mount design and the 100 × 10 0mm hole pattern on the back panel to install t he LCD monitor to the wall. Wall-mount Installation (Option) 1. The Monitor fixing bracket to the monitor using t he fixing screws provided. 2.
42 ……………………………………………… ……………………. INSTRUCTION MANUAL ▶ PIN ASSI G NMENTS Pin 1 RED VIDEO 9 2 GREEN VIDEO 10 SIGNAL CABLE DETECT 3 BLUE VIDEO 11 GROUND 4 GROUND 12 SDA(for DDC) 5 GROUND 13 H-SYNC.(or H+V SYNC.
INSTRUCTION MANUAL …… ………………………………………………………………. 43 This monitor features a power management syst em to “power down” upon receipt of the VESA DPMS(The display power management sign alin g) from a VESA DPMS video ca rd.
44 ……………………………………………… ……………………. INSTRUCTION MANUAL 22 ” 22 ˝ Diagonal AM-TFT(Active-Matrix) Pixel pitch(mm) : 0.
ACTIVE DISPLAY AREA (H x V) 473.76 mm X 296.1 mm (18.65” X 11.65”) PACKI N G DIMENS IONS (W x D x H) 650 mm X 205 mm X 545 mm (25.59” X 8.07” X 21.45”) Net Weight : 5.83kg (12.83 Ibs) WEIGHT Gross Weight : 8.42kg (18.52 Ibs) ELECTRICAL RATINGS DC 12V / 5.
WEEE Symbols 46 ……………………………………………… ……………………. INSTRUCTION MANUAL Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Appl.
Taiwan - Headquarter Office 12F, No.79 Sec.1 Shin-Tai Wu Road, Hsi-Chi, Taipei, Taiwan Tel: +886-2-26982334 Fax: +886-2-26982380 China - Beijing Office Room 609,Technology Trade Build ing.
Een belangrijk punt na aankoop van elk apparaat EverFocus EN-7522C (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen EverFocus EN-7522C heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens EverFocus EN-7522C vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding EverFocus EN-7522C leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over EverFocus EN-7522C krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van EverFocus EN-7522C bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de EverFocus EN-7522C kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met EverFocus EN-7522C . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
