Gebruiksaanwijzing /service van het product EN-7542H van de fabrikant EverFocus
Ga naar pagina of 48
Instruction Manual EN-7542H 42” PREMIUM Wide Screen TFT-LCD MONITOR.
Please read this manual thoroughly before use, and keep i t handy for future reference..
SAFETY INSTRUCTION ……………………………………………… ………………….. 2 ~ 3 CAUTIONS ……………………………………………………………… ...................... .... 4 FCC RF INTERFERENCE STATEM EN T ……………………… …….
INSTRUCTION MANUA L ………………………………………………………… …………. 1 Import ant Safety Instruction 1. Read these instructions. 2. Keep these Instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water .
bsolete outlet. 10. Protect the power cord from being walked on or pinched p articularly at pl ugs, convenience recept acles and the point where they exit from the apparatus.
This symbol is intended to alert the user to the presence of uninsulated : dangerous voltage with in the product’s enclosure that may be of suffici ent magnitude to constitute a risk of electric shock to persons.
NEVER REMOVE THE BACK COVER Removal of t he back cover should be carried out only by qual ified person nel. DO NOT USE IN HO S TI LE ENVIRONME NT S To prevent shock or fire hazard, do not expose the unit to rain or moist ure. This unit is designed to be used in the office or home.
This equipment h as been tested and found to comply w ith the limits for a Cl ass A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide re asonable protection against harmful i nterference in a residential inst allation.
A. BACK PANEL CONTROL 1. HDMI IN 2. DVI IN 3. PC VGA IN 4. PC STEREO IN 5. AUDIO O UT 6. COMPONENT IN 7. COMP ONENT AU D IO L/R IN 8. Trigger Input 9. AV 1 IN Composite signal input for AV 1 10. AV 1 OUT Video looping out for AV 1 11. AV 2 IN Composite signal input for AV 2 12.
6 ……………………………………………………………………. INSTRUCTION MA NUAL B. REMOTE CONTROLLER 1. POWER ( ) Turn the power ON or OFF. There will be a few seconds delay before the display appears. 2. SOURCE Select pc or video(AV1/AV2/S-Video/Component/HDMI/DVI/PC) sources.
INSTRUCTION MANUA L ………………………………………………………… …………. 7 C. FRONT KEY CONTROL 1. SOURCE / S E LE C T Select PC or video. Select On Screen Disp lay menu. 2. MENU Activate and exit the On Screen Display. 3 / 4.
9. POWER LED The power LED light s with green when the power is turn ed ON. The power is t urned off by press ing the power switch again and the power LED goes Red.
A: CUSTOM MENU (For HDMI, DVI & PC Input) 1) Press the MENU button and then press the up( ▲ ) or down( ▼ ) button to s elect the Custom. 2) Press the up( ▲ ) or down( ▼ ) button to select the sub menu. 3) Pres s the left(◀) or right( ▶ ) button to adjust the picture setting.
1) Press the MENU button and then press the up( ▲ ) or down( ▼ ) button to select the Picture / S ound. 2) Press the right( ▶ ) or SOURCE/SELECT button. 3) Press the up( ▲ ) or down( ▼ ) button to select the Picture Mode. 4) Press the right( ▶ ) or SOURCE/SELECT button.
3. Mute 1) Press the up( ▲ ) or down( ▼ ) button to select the Mute. 2) Press the right( ▶ ) or SOURCE/SELECT button. 3) Press the up( ▲ ) or down( ▼ ) button to select the On or Off.
INSTRUCTION MANUAL …… ………………………………………………………………. 11 5. Size 1) Press the up( ▲ ) or down( ▼ ) button to select the Size 2) Press the right( ▶) or SOURCE/SELECT button. 3) Press the up( ▲ ) or down( ▼ ) button to select the Size option.
1) Press the up( ▲ ) or down( ▼ ) button to select the NR. 2) Press the right( ▶) or SOURCE/SELECT button. 3) Press the up( ▲ ) or down( ▼ ) button to select the On or Off. 4) Press the MENU button to save. 12 ……………………………………………… …………………….
1) Press the up( ▲ ) or down( ▼ ) button to select the 3D Comb. 2) Press the right( ▶) or SOURCE/SELECT button. 3) Press the up( ▲ ) or down( ▼ ) button to select the On or Off. 4) Press the MENU button to save. B. Picture / Sound Menu (For HDMI, DVI & PC Input) 1.
5) Press the up( ▲ ) or down( ▼ ) button to select the Picture Mode option. 6) Press the MENU button to save. INSTRUCTION MANUAL …… ………………………………………………………………. 13 2-1. Color Tone 1) Press the up( ▲ ) or down( ▼ ) button to select the Color Tone.
3) Press the left( ▶) or SOURCE/SELECT button again. 4) Press the up( ▲ ) or down( ▼ ) button to select the Color Tone option. 5) Press the MENU button to save. 14 ……………………………………………… ……………………. INSTRUCTION MANUAL 2-2.
3) Press the up( ▲ ) or down( ▼ ) button to select the Red(R), Green(G) or Blue(B). 4) Press the left(◀) or right( ▶) button to adjust color density. 5) Press the MENU button to save. INSTRUCTION MANUAL …… ……………………………………………………………….
1) Press the up( ▲ ) or down( ▼ ) button to select the Size. 2) Press the right( ▶) or SOURCE/SELECT button. 3) Press the up( ▲ ) or down( ▼ ) button to select the Size option. 4. PC control (On ly PC Input ) 1) Press the up( ▲ ) or down( ▼ ) button to select the PC.
Phase: Adjust the number of horizontal picture elements. H-Position: Move image horizontally on screen right or left. V-Position: Move image vertically on screen up or down. Frequency: Adjust the vertical noise of screen image. 16 ……………………………………………… …………………….
2) Press up( ▲ ) or down( ▼ ) button to select the On or Off. 3) Press the MENU button to save. INSTRUCTION MANUAL …… ………………………………………………………………. 17 2. Input Source 1) Press the up( ▲ ) or down( ▼ ) button to select the Input Source.
3. Size 1) Press the up( ▲ ) or down( ▼ ) button to select the Size. 2) Press the right( ▶ ) or SOURCE/SELECT button. 3) Press the up( ▲ ) or down( ▼ ) button to select the Size option. 4) Press the MENU button to save. 18 ……………………………………………… …………………….
1) Press the up( ▲ ) or down( ▼ ) button to select the Position. 2) Press the right( ▶ ) or SOURCE/SELECT button. 3) Press the up( ▲ ) or down( ▼ ) button to select the Position option. 4) Press the MENU button to save. 5. Sw ap 1) Press the up( ▲ ) or down( ▼ ) button to select the Swap.
INSTRUCTION MANUAL …… ………………………………………………………………. 19 5. Sound Select 1) Press the up( ▲ ) or down( ▼ ) button to select the Sound Select. 2) Press the right( ▶ ) or SOURCE/SELECT button. 3) Press the up( ▲ ) or down( ▼ ) button to select the Sound Select option.
1) Press the up( ▲ ) or down( ▼ ) button to select the Input Source. 2) Press the right( ▶ ) or SOURCE/SELECT button. 3) Press the up( ▲ ) or down( ▼ ) button to select the Input Source option. 4) Press the MENU button to save. 20 ……………………………………………… …………………….
1) Press the right( ▶ ) or SOURCE/SELECT button 2) Press the right( ▶ ) or SOURCE/SELECT button again. 3) Press SOURCE/SELECT button to execute the reset. Reset : All settings go to the factory initialization. INSTRUCTION MANUAL …… ……………………………………………………………….
1) Press the up( ▲ ) or down( ▼ ) button to select the Language. 2) Press the right() or SOURCE/SELECT button. 3) Press the up( ▲ ) or down( ▼ ) button to select language. 4) Press the MENU button to save. 3. OSD Tone 1) Press the up( ▲ ) or down( ▼ ) button to select the OSD Tone.
4. Blue Screen 1) Press the up( ▲ ) or down( ▼ ) button to select the Blue Screen. 2) Press the right() or SOURCE/SELECT button. 3) Press the up( ▲ ) or down( ▼ ) button to select the On or O ff. 4) Press the MENU button to save. 5. Key Lock 1) Press the up( ▲ ) or down( ▼ ) button to select the Key Lock.
INSTRUCTION MANUAL …… ………………………………………………………………. 23 6. Trigger 1) Press the up( ▲ ) or down( ▼ ) button to select the Trigger. 2) Press the right() or SOURCE/SELECT button. 6-1. Trigger Enable 1) Press the up( ▲ ) or down( ▼ ) button to select the Trigger Enable.
24 ……………………………………………… ……………………. INSTRUCTION MANUAL 6-2. Trigger Input 1) Press the up( ▲ ) or down( ▼ ) button to select the Trigger Input . 2) Press the right() or SOURCE/SELECT button. 3) Press the up( ▲ ) or down( ▼ ) button to select the Trigger Input option.
INSTRUCTION MANUAL …… ………………………………………………………………. 25 6-4. Trigger Time 1) Press the up( ▲ ) or down( ▼ ) button to select the Trigger Ti me. 2) Press left() or right() button to adjust Trigger Time setting.
N/C (Normal Closed): When Trigger cable is opened, Trigger function is activated. N/O (Normal Opened): When Trigger cable is closed, Trigger function is activated. High: When Trigger signal is hig h(2~5 [V]), Tri gger function is activated. Low: When Trigger signal is low(0~0.
The Type of Imag e 2 : Component, HD MI, DVI or PC. INSTRUCTION MANUAL …… ………………………………………………………………. 27 7. Auto switching 1) Press the up( ▲ ) or down( ▼ ) button to select the Auto switc hing. 2) Press the right() or SOURCE/SELECT button.
1) Press the right() or SOURCE/SELECT button. 2) Press the up( ▲ ) or down( ▼ ) button to select the On or Off . 3) Press the Menu button to save. 28 ……………………………………………… ……………………. INSTRUCTION MANUAL 7-2.
1) Press the up( ▲ )or down( ▼ ) button to select the Inputs enabled. 2) Press the right() or SOURCE/SELECT button. 3) Press the up( ▲ ) or down( ▼ ) button to select the Input. 4) Press the right() or SOURCE/SELECT button. 1) Press the up( ▲ ) or down( ▼ ) button to select the On or O ff.
1) Press the up( ▲ ) or down( ▼ ) button to select the Time. 2) Press the left() or right() button to adjust the Time setting. 3) Press the MENU button to save. 8. Image Rotation 1) Press the up( ▲ ) / down( ▼ ) button to sel ect the Image Rotation.
30 ……………………………………………… ……………………. INSTRUCTION MANUAL 8-1. Image Rotation On/Off 1) Press the right( ▶ ) or SOURCE/SELECT button. 2) Press the up( ▲ ) or down( ▼ ) button to select the On or O ff .
INSTRUCTION MANUAL …… ………………………………………………………………. 31 Using the wall mo unt design and the (130x130)x 634 hole pattern on the back panel to install the LCD monitor to the wall . Wall-mount Installation 1.
32 ……………………………………………… ……………………. INSTRUCTION MANUAL.
▶ PIN ASSI G NMENTS Pin 1 RED VIDEO 9 2 GREEN VIDEO 10 SIGNAL CABLE DETECT 3 BLUE VIDEO 11 GROUND 4 GROUND 12 SDA(for DDC) 5 GROUND 13 H-SYNC.(or H+V SYNC.) 6 RED GROUND 14 V-SYNC. 7 GREEN GROUND 15 SCL (for DDC) 8 BLUE GROUND ▶ ACCESSORY INSTRUCTION MANUAL ………………… ………………………………………………….
This monitor features a power management syst em to “power down” upon receipt of the VESA DPMS(The display power management sign alin g) from a VESA DPMS video ca rd. The VESA DPMS-compliant vid eo card performs this signali ng syste m through n ot sending horizontal, vertical, or sync signal.
42’’ WXGA 42’’ WUXGA 42 ˝ Diagonal AM-TFT(Active -Matrix) 42 ˝ Diagonal AM-TFT( Active-Matrix) Pixel pitch(mm) : 0.681mm(H) x 0.681mm(V) Pixel pitch( mm) : 0.
INSTRUCTION MANUAL …… ………………………………………………………………. 35 WEEE Symbols.
36 ……………………………………………… ……………………. INSTRUCTION MANUAL Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in the.
Taiwan - Headquarter Office 12F, No.79 Sec.1 Shin-Tai Wu Road, Hsi-Chi, Taipei, Taiwan Tel: +886-2-26982334 Fax: +886-2-26982380 China - Beijing Office Room 609,Technology Trade Build ing.
Een belangrijk punt na aankoop van elk apparaat EverFocus EN-7542H (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen EverFocus EN-7542H heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens EverFocus EN-7542H vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding EverFocus EN-7542H leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over EverFocus EN-7542H krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van EverFocus EN-7542H bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de EverFocus EN-7542H kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met EverFocus EN-7542H . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
