Gebruiksaanwijzing /service van het product 9103 van de fabrikant Allied Telesis
Ga naar pagina of 40
Allied T elesyn™ 910x integrated Multiservice Access Plat form Inst allation Guide Release 7.0 (and up unless reissued) Issue 1 © 2005 Allied T elesyn Networks.
© 2005 Allied T elesyn Networks. All rights reserved . Information subject to change without notice . Introduction Congratulations on your purchase of a Allied T ele syn™ 910x, integrated Mu ltiservice Access Platform (iMAP) product.
Table of Contents Telesyn 9100 Installation Gu ide (Table of Contents) 1 Installation of Allied T elesyn 9100 - - - - - - - - - - - - - - - - - - - 1-1 1.1 Installation Overview for the 9100 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1-1 1.
TOC-2 Telesyn User Guide (Table of Contents) 1.1 1.1 Install the CFC12 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1-24 1.1 1.2 Install the Service Module - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 1-25 1.
1-1 Telesyn 9100 Installation Guide (Ins tallation of Allied Telesyn 9100) 1. Inst allation of Allied T elesyn 9100 1.1 Inst allation Overview for the 9100 1.
Following Procedure s for the 9101, 9102 , and 9103 Allied T elesyn 9100 Configur at ion Telesyn 9100 Installation Guide (Ins tallation of Allied Telesyn 9100) 1-2 [ FIGURE 1-1 Allied T elesyn 9101 - .
9101 Site Requirements Selecting a Site for the 9100 1-3 Telesyn 9100 Installation Guide (Ins tallation of Allied Telesyn 9100) 1.3.1 9101 Site Requirement s The Allied T elesyn 9101 is inst alled in a environment that is affected by the existing installed equi pment and the specific requirements of the Alli ed T elesyn 9101 shelf.
Selecting a Site for the 9100 9102/9103 Sit e Requirement s Telesyn 9100 Installation Guide (Ins tallation of Allied Telesyn 9100) 1-4 1.3.2 9102/9103 Site Requirement s The Allied T elesyn 9101 is installed in a environ ment that is affected by the existing installed equipment and the specific requirements of the Allied T elesyn 9102/9103 shelf.
9102/9103 Site Requirements Selecting a Site for the 9 100 1-5 Telesyn 9100 Installation Guide (Ins tallation of Allied Telesyn 9100) FIGURE 1-3 T elesyn 9100 Space Requirements for Open Rack Envir on.
Setup Checklist 9101 Parts Included in Order Telesyn 9100 Installation Guide (Ins tallation of Allied Telesyn 9100) 1-6 1.4 Setup Checklist 1.4.1 9101 Part s Included in Order Allied T elesyn provides and ship s certain parts with each order .
9102 / 9103 Parts Included in Order Setup Checklist 1-7 Telesyn 9100 Installation Guide (Ins tallation of Allied Telesyn 9100) 1.4.2 9102 / 9103 Part s Included in Order Ta b l e 1 - 6 lists th e items that ar e shipped with the 9102. Note: If any of these it ems are not included, co ntact your local Allied T elesy n repres entative.
Shelf Mounting Options 9101 Mounting Options Telesyn 9100 Installation Guide (Ins tallation of Allied Telesyn 9100) 1-8 Ta b l e 1 - 8 lists th e items that are to be provided by the customer . 1.5 Shelf Mounting Options Three mounting optio ns are available for the 9101; front, center , and wall.
9101 Mounti ng Options Shelf Mountin g Options 1-9 Telesyn 9100 Installation Guide (Ins tallation of Allied Telesyn 9100) FIGURE 1-4 Front mount option for 9101 1. Place the brackets in the appropriate location as shown in Figure 1-4 . 2. Using the M3 x 6mm screws, mount the front brackets.
Shelf Mounting Options 9101 Mounting Options Telesyn 9100 Installation Guide (Ins tallation of Allied Telesyn 9100) 1-10 1.5.1.2 Ce nter Mounting Option - 9101 The bracket is moun ted on the center of the 9101 u nit as illustrated i n Figure 1-5 . Mount the bracket following the steps of Section 1.
9102/3 Mounti ng Options Shelf Mountin g Options 1-11 Telesyn 9100 Installation Guide (Ins tallation of Allied Telesyn 9100) 1.5.2 9102/3 Mounting Options Because of the depth of the 9102/3 unit, there are adjustable brack et extensions, and attach ed to these extensions are the rear brackets.
Shelf Mounting Options 9102/3 Mounting Options Telesyn 9100 Installation Guide (Ins tallation of Allied Telesyn 9100) 1-12 1.5.2.2 C enter Mou nting Op tion The bracket is mounted on the center of the 9101 un it as illustrated in Figur e 1-7 . Mount the brackets following the steps of Section 1.
9102/3 Mounti ng Options Shelf Mountin g Options 1-13 Telesyn 9100 Installation Guide (Ins tallation of Allied Telesyn 9100) 1.5.2.3 At t aching the Exte nsion Bracket s and Rear Bracket s Caution: T wo persons are required to moun t the 9102/3, with one person in front of and another person behind the unit.
W all Mounting Option Overview Telesyn 9100 Installation Guide (Ins tallation of Allied Telesyn 9100) 1-14 1.6 W all Mounting Option 1.6.1 Overview If the customer wishes to wa ll mount the unit, there is a separate kit available through an Allied T elesyn repre- sentative.
Installing the W all Mount Allied T elesyn 9100 Installation Safety 1-15 Telesyn 9100 Installation Guide (Ins tallation of Allied Telesyn 9100) Caution: The customer must ensure that the we ight of a fully conf igured unit can be su pported by the mounting hardware/support us ed with the brack ets.
Allied T elesyn 9100 Inst allati on Safety Safety Pre cautions While Worki ng with Electri city Telesyn 9100 Installation Guide (Ins tallation of Allied Telesyn 9100) 1-16 • The user should not perform any action that creates an unsafe or hazar dous situation for th emselves or other personnel.
Precautions and Conforman ce St an dards Allied T elesyn 9100 Installation Safety 1-17 Telesyn 9100 Installation Guide (Ins tallation of Allied Telesyn 9100) 3. Connect the clip from the ESD-preventative device to an unpainted surf a ce of the frame, rack or ESD point on the chassis frame connectin g it directly to ground.
Inst alling Power and Grou nd for the 9101 Laser Safety Ins tructions Telesyn 9100 Installation Guide (Ins tallation of Allied Telesyn 9100) 1-18 1.7.5 Laser Safety Instructions 1.
Connect Power and Grou nd Installing Power and Ground for the 9101 1-19 Telesyn 9100 Installation Guide (Ins tallation of Allied Telesyn 9100) 1.8.2 Connect Power and Ground The Allied T elesyn 91 01 is shipped with a power entry module plug.
Inst alling Power and Ground for the 9101 Connect Power and Ground Telesyn 9100 Installation Guide (Ins tallation of Allied Telesyn 9100) 1-20 FIGURE 1-10 9101 power entry module (PEM) The figure below details the 9 100 PEM plug.
Connect the -48VDC office po wer supply to th e 9101 PEM plug . In sta lling Power an d Ground for the 9101 1-21 Telesyn 9100 Installation Guide (Ins tallation of Allied Telesyn 9100) 1.8.3 Connect the -48V DC office power suppl y to the 9101 PEM plug.
Inst alling Power and Ground for the 9101 Connect to Power Source (Single or Dual) Telesyn 9100 Installation Guide (Ins tallation of Allied Telesyn 9100) 1-22 1.8.4 Connect to Power Source (Singl e or Dual) The user can decide to connect th e A and B feeds to a single power source or a dif fer ent power source.
Connect Power and Grou nd Installing Power and Ground for the 9102 1-23 Telesyn 9100 Installation Guide (Ins tallation of Allied Telesyn 9100) 1.9 Inst alling Power and Ground for the 9102 1.9.1 Connect Power and Ground The Allied T e lesyn 91 02 com es with a pre-installed AC power converter .
Inst all Card Modules Inst all the CFC12 Telesyn 9100 Installation Guide (Ins tallation of Allied Telesyn 9100) 1-24 1.1 1 Install Card Modules 1.1 1.1 Inst all the CFC12 Note: Do not attempt to install system cards withou t observing correct antist atic procedur es.
Install the Service Module Install Card Modules 1-25 Telesyn 9100 Installation Guide (Ins tallation of Allied Telesyn 9100) FIGURE 1-15 Detail of the card la tch in Open Positio n (Card Below is Locked) 1.1 1.2 Inst all the Service Module The Service Modules can be placed in any of slots 0, 1 a nd 2.
Configure Local T erminal or PC Inst all Filler Plat es (FPF) Telesyn 9100 Installation Guide (Ins tallation of Allied Telesyn 9100) 1-26 1.1 1.4 Inst all Filler Plates (FPF) For the Allied T elesyn 9101/9102, and 9103, FPFs are inst alled in empty service module slots.
Install Filler Plates (FPF) Configure Local T erminal or PC 1-27 Telesyn 9100 Installation Guide (Ins tallation of Allied Telesyn 9100) • Carrier Detect The settings for th e CONSOLE po rt are facto.
Connect System Ca bles Service Modules with RJ21connector s Telesyn 9100 Installation Guide (Ins tallation of Allied Telesyn 9100) 1-28 1.13 Connect System Cables The following figure illustrates sy stem cable connector locations. FIGURE 1-16 9101 Cable Connections - T o Be Supplied 1.
SMs with RJ45 connectors Connect System C ables 1-29 Telesyn 9100 Installation Guide (Ins tallation of Allied Telesyn 9100) 1.13.2 SMs with RJ45 connectors Attach the RJ45 end of the Ethernet cable to the specified port on the FE10 card.
Connect System Ca bles Dat a Management Cable (MGMT Port on CFC12) Telesyn 9100 Installation Guide (Ins tallation of Allied Telesyn 9100) 1-30 1.13.5 Dat a Management Cable (MGMT Po rt on CFC12) Note: Connect this cable only if the user plans to use the MGMT port for the ma nagement interface .
Data Management Cable (MGMT Port on CFC12) Apply Power and Check Startup Sequence 1-31 Telesyn 9100 Installation Guide (Ins tallation of Allied Telesyn 9100) 1.14 Apply Power and Check S tartup Sequence 1. For the 9101, insert Fuse A and then Fuse B into the 9101 PEM.
Apply Power and Check St artup Sequence Dat a Management Cable (MGMT Port on CFC12) Telesyn 9100 Installation Guide (Ins tallation of Allied Telesyn 9100) 1-32 @@@@@@@@@@@" "@@@@@ " @@@@@@@@@@@@@" Allied Telesyn Net works, Inc. Allied Telesyn 12G Central Fabric Contr oller Version 7.
Check software load Check the con figuration 1-33 Telesyn 9100 Installation Guide (Ins tallation of Allied Telesyn 9100) 7. Check the management logs for any pro blems by typing the follo wing: > SHOW LOG SEVERITY=CRITICAL > SHOW LOG SEVERITY=MAJOR > SHOW LOG SEVERITY=MINOR 8.
Adding AC Power Module Check management interface s Telesyn 9100 Installation Guide (Ins tallation of Allied Telesyn 9100) 1-34 1.16 Adding AC Power Module To B e S u p p l i e d Caution: When adding a power supp ly , ensure power is not be ing applied and the switch for the AC supply is in the Of f (-) position.
2-1 Telesyn x400 Series - User Guide (Appendix) 2. Appendix 2.1 Glossary of T erms T o Be Su pplied.
T elesyn 9100 Inventory For m Telesyn x400 Series - User Guide (Appendix) 2-2 2.2 T elesyn 9100 Inventory Form Y ou can use the following form to record registration information about the T elesyn 9100 and keep with your office records. Note: Y ou may also id entify the p roduct with C LI commands.
Een belangrijk punt na aankoop van elk apparaat Allied Telesis 9103 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Allied Telesis 9103 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Allied Telesis 9103 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Allied Telesis 9103 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Allied Telesis 9103 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Allied Telesis 9103 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Allied Telesis 9103 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Allied Telesis 9103 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
