Gebruiksaanwijzing /service van het product HDP5000 van de fabrikant FARGO electronic
Ga naar pagina of 44
HDP5000 CUPS Driver User Guide Linux & MAC OS © 2009 HID Global Corporation. All rights reserved. Document Number L001389 Rev.1.1 Fargo HDP5000 CUPS Driver User G uide for Linux and MAC.
HDP5000 CUPS User Guide Linux & Mac OS User Guide (Rev 1.1), property of HID/Fargo Electronics, Incorporated © 2009 HID Global Corporation. All rights reserved.
Table of Contents Supported Distributi ons CUPS 5 Installation Procedure for the CUPS Driver on Linux OS 6 Installation Procedure for MAC OS X Driver 7 HID/Fargo Printer Driver Setup 11 Selecting the .
Setting Printer Options 35 Canceling Pri nt jobs from Com mand Line 35 General Printing Options for CUPS 35 Ethernet Installati on Procedure for the MAC Driver 36 Printer Maintenance Op tions for Linu.
Supported Distributions CUPS The Common Unix Printing System ( CUPS ), a modular printing system for Unix-like computer operating systems, allows a com puter to act as a print serv er. A computer running CUPS is a host that can accept print jobs from c lient computers, process them, and send them to the appropriate printe r.
Installation Procedure for the CUPS Driver on Linux OS Note: On some Linux Distributions, it may be necessary to disable SELinux (security enhanced Linux) capabilities in order to install or use the CUPS Driver. Refer to the SELinux web site at: www.nsa.
Installation Procedure for MAC OS X Driver Download the Mac Printer Driver from www.fargosupport.com to the desktop. (This will be in Zip format) Unzip the folder Double-click on the HDP5000V1.0.0.4 PKG folder to start the installation HDP5000 Cups (Linux & MAC OS) Use r Guide Rev1.
HDP5000 Cups (Linux & MAC OS) Use r Guide Rev1.1 8.
HDP5000 Cups (Linux & MAC OS) Use r Guide Rev1.1 9.
HDP5000 Cups (Linux & MAC OS) Use r Guide Rev1.1 10.
HID/Fargo Printer Driver Setup Once the CUPS and MAC driver are installed the printer options are setup as shown below. Go to webpage http://localhost:631 In order to access the Set Printer Driver options shown below. (NOTE: Click here for Ethernet setup.
Selecting the Supported Ribbon Types Command Line Usage CUPS option Description Ribbon = YMC Ribbon Type = YMC Sets the Ribbon type for the print job to YMC – Full Color Ribbon = YMCK Ribbon Type = YMCK Sets the Ribbon type for the print job to YMCK – Full Color/ Resin Black.
Selecting the Disable Printing Option Command Line Usage CUPS option Description DisablePrinting = True Disable Printing = Yes Select it to encode or re-encode cards to save time and avoid the use of printing supplies. DisablePrinting = False Disable Printing = No Select it to perform full printing and encoding operations.
Using the Image Color Capabilities Selecting the Color Matching Options Command Line Usage CUPS Option Description ColorMatching = System Color Matching = System Color Management This provides a closer match to the RGB color specifications.
Selecting Resin Dither: Select the appropriate dither method according to the type of image to be printed. ( Note: This option only affects those objects printed on the backside of a card with the resin black Panel of a YMCK or YMCKK Print Ribbon.
Following the Resin Heat Front Procedure Command Line Usage CUPS optio n Description ResinHeatFront=0 <-50 to 50> Resin Heat Front (K) = 0 1. Adjust the Resin Heat Front value higher to use more heat to transfer resin to a card. 2. Adjust the Resin Heat Front value lower to reduce the amount of heat (used to transfer resin to the card).
Image Transfer Options Selecting the Horizontal Option Note: Over adjusting the Horizontal offset may result in ribbon breaking. Command Line Usage CUPS option Description HOffset=0 <-100 to 100>.
Transfer Temperature Command Line Usage CUPS option Description TransferHeat =0 <150 to 190> Transfer Heat = 0 <150 to 190> Transfer Temperature Sets temperature for InTM transfer in Celsius Lower limit = 150.0 Celsius, Upper limit = 190.0 Celsius • UltraCard III - Composite: Default = 175.
K-Panel Options Selecting the Front K-Panel Area Command Line Usage CUPS option Description KPanelAreaFront = None Front K-Panel Area = None Select None to have any graphics objects that are black in .
Selecting the K-Panel Only Front Options Command Line Usage CUPS Options Description KPanelOnlyFront = True K-Panel Only Front = Yes Select K-Panel Only Front if printing resin black onto a white background in order to maximize the sharpness of printed text and bar codes.
Lamination Options Lamination Position and Speed: Command Line Usage CUPS Options Description LaminationPosition = <-100 to +100> Lamination Position = < -100 to +100> Horizontal Offset: T.
Lamination Film Types Per Cartridge Command Line Usage CUPS Options Description LaminationType1 = 0 Lamination Film type for cartridge 1 = Clear Film Indicates that clear film is being used in cartridge 1. LaminationType1 = 1 Lamination Film type for cartridge 1 = 0.
LaminationType2 = 3 Lamination Film type for cartridge 2 = Polyguard Alternating Patch Indicates that Polyguard Alternating Patch is being used in cartridge 2. LaminationType2 = 4 Lamination Film type for cartridge 2 = Registered Film Indicates that Registered Film is being used in cartridge 2.
Magnetic Encoding Options Setting the Encoding Mode Command Line Usage CUPS option Description MagEncodingMode1 = ISO Magnetic Stripe Encoding Mode = ISO Sets the Encoding Mode for the Print job to ISO. See Sending ISO Magnetic Encoding Information for additional information.
additional information. MagEncodingMode3 = ISO Magnetic Stripe Encoding Mode = ISO Sets the Encoding Mode for the Print job to ISO. See Sending ISO Magnetic Encoding Information for additional information. MagEncodingMode3 = JIS2 Magnetic Stripe Encoding Mode = JIS II Sets the Encoding Mode for the Print job to JIS II.
Sending ISO Magnetic Encoding Information The CUPS Driver uses URL Encoding when defining data to be encoding to the Magnetic Stripe. Any special characters (such as start and end sentine ls) must be described with URL encoding to be recognized. See the URL Encoding Reference Reviewing the URL Encoding Reference for additional information.
Sending JIS II Magnetic Encoding Information The CUPS Driver uses URL Encoding when defining data to be encoding to the Magnetic Stripe. Any special characters (such as start and end sentine ls) must be described with URL ncoding to be recognized. See the URL Encoding Reference below.
Reviewing the ASCII Code and Character Table ASCII Code Character ASCII Code Character ASCII Code Character 32 space 56 8 80 P 33 ! 57 9 81 Q 34 “ 58 : 82 R 35 # 59 ; 83 S 36 $ 60 < 84 T 37 % 61 = 85 U 38 & 62 > 86 V 39 ' 63 ? 87 W 40 ( 64 @ 88 X 41 ) 65 A 89 Y 42 * 66 B 90 Z 43 + 67 C 91 [ 44 ' 68 D 92 45 - 69 E 93 ] 46 .
Using the Command Line Option Setup for CUPS Adding a USB Printer The primary CUPS interface can be accesse d on the local computer using a web browser. The address for the CUPS interface is: http://localhost:631/ Step Procedure 1 Attach Power and USB to the printer.
10 After installation is complete, it may be necessary to specify the page sca ling options for the Print Queue. Example output from lshal udi = '/org/freedesktop/Hal/devices/usb_device_9b0_2110_A8010217_if0_printer_A8010217' info.addons = {'hal_lpadmin --add'} (string list) info.
printer.vendor = 'Fargo Electronics Inc ' (string) Adding a Network Printer The primary CUPS interface can be accessed on the local computer using a web browser.
Determining the Printer IP Address Use this procedure to determine the IP address of a Printer. Step Procedure 1 Apply power to the Printer. 2 Ensure that the Printer is connected to the network via the RJ45 jack on the back of the Printer. 3 Wait up to one minute for the Printer to allow the Printer to obtain an IP address from DHCP.
Probing for Fargo Network Printers on the Network The fargo-netprobe program installed with the driver can be used to probe for Fargo printers on the local subnetwork. This program must be run as root: # fargo-netprobe 192.168.1.127 Reviewing the File Listing /usr/share/cups/profiles/sRGB.
Printing a Sample Card Entering the Print Only Command Using the Fargo Card Printer ---------------------------- To test the functionality of the printer, you can type the following command to print a sample card (root privileges not necessary): $ lpr samplecard.
S etting Printer Options For many types of files, the default printer opt ions m ay be sufficient for your needs. However, at times you may need to change the options for a particular file you are printing. Cups provides both they System V (lp) and Berkeley (lpr) printing commands.
Ethernet Installation Procedure for the CUPS Driver Step Procedure 1 On the home page click the add printer button. 2 On the Add Printer page Enter a name for the printer. The name cannot contain any spaces. Enter a description of the printer’s location.
4 On the Device URI for (printer name) page enter the IP address of the printer in the format of socket://aaa.bbb.ccc.ddd:9100 where aaa.bbb.ccc.ddd is the IP address shown on the printer LCD display 5 On the Make/Manufacturer page, select Fargo Electronics from the Make: list HDP5000 Cups (Linux & MAC OS) Use r Guide Rev1.
6 On the Model/Driver page select HDP5000 from the Model: list and click the Add Printer button 7 Refer to the users guide to set up the print options. When you have completed setting up the options click on the Set Printer Options to save your changes.
8 Click the Print Test Page button to confirm printer operation. HDP5000 Cups (Linux & MAC OS) Use r Guide Rev1.1 39.
Printer Maintenance Options for Linux and Mac Performing a Ribbon Sensor Calibration Step Description 1 Ensure that the ribbon cartridge is removed. 2 Ensure the Printer’s cover is closed. 3 From a terminal window enter: fargo-sendprn “/usr/share/fargo/HDP5000/RibbonCalibration.
Performing a Film Sensor Calibration Step Description 1 Ensure the film cartridge is installed. 2 Ensure the printer cover is closed. 3 From a terminal window enter: fargo-sendprn “/usr/share/fargo/HDP5000/FilmCalibration.prn” 4 The Printer’s LCD will display CALIBRATE PASSED.
Performing a Lamination Sensor Calibration Step Description 1 Ensure that the cartridges are out of the Laminator. 2 Ensure the Laminator cover is closed. 3 From a terminal window enter: fargo-sendprn “/usr/share/fargo/HDP5000/LaminatorCalibration.prn” 4 The Printer’s LCD will display CALIBRATE PASSED.
Cleaning the Printer Step Description 1 Remove Card, Film and Laminate cartridges and close the covers. 2 Remove the paper backing from both sides of the Cleaning Card. *Note: (DO NOT remove left liner if a magnetic encoding module is installed in your printer) 3 Insert the Cleaning Card into the Card Hopper’s infeed rollers.
Printing a Test Card Step Description 1 Ensure that the cards are in the hopper. 2 Ensure that YMCK ribbon is installed in the printer. 3 From a terminal window enter: lpr -l “/usr/share/fargo/HDP5000/HDP5000Tst.prn” 4 The test card should print. HDP5000 Cups (Linux & MAC OS) Use r Guide Rev1.
Een belangrijk punt na aankoop van elk apparaat FARGO electronic HDP5000 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen FARGO electronic HDP5000 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens FARGO electronic HDP5000 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding FARGO electronic HDP5000 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over FARGO electronic HDP5000 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van FARGO electronic HDP5000 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de FARGO electronic HDP5000 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met FARGO electronic HDP5000 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
