Gebruiksaanwijzing /service van het product XEM-1XP van de fabrikant Allied Telesis
Ga naar pagina of 31
x900 Series Switch and SwitchBlade ® x908 Expansion Module Installation Guide XEM-1XP XEM-2XP XEM-2XS XEM-12S XEM-12Sv2 XEM-12T XEM-12Tv2 XEM-2XT XEM-24T XEM-STK.
Expansion Modules 2 x900 Series Switch and Switch Blade ® x908 Expansion Modu le Installation Guide Document Number 613-000032 REV N © 2005-2012 Allied T elesis, Inc. All rights reserved. No part of this publication ma y be r epr oduced without prior written permission fr om Allied T elesis, Inc.
Installation Guide 3 Contents About this Guide ...................... .......................... .......................... .......................... .......... 4 Compatible Switches an d Operating Syste ms ....................... ...................
Expansion Modules 4 About this Guide Optional expansion modules (XEMs) enable econ omical combinations of port type, speed and density in a single switch.
Installation Guide 5 Compatible Switches and Operating Systems XEMs can be installed in the follo wing switch es: ■ x900-12XT/S ■ x900-24XT ■ x900-24XT -N ■ x900-24XS ■ SwitchBlade x908 The .
Expansion Modules 6 Compatible Pluggab le Optical Modules For the latest li st of approv ed SFP , SFP+ and XFP fibre transceivers plus SFP+ Direct Attach cop per modules, contact y our authorised Allied T elesis distributor or r eseller.
Installation Guide 7 XEM-1XP 10 Gigabit XFP P o rt The XEM-1 XP single-port 10 Gigabit Ethernet expansion module featur es: ■ one XFP port ■ LEDs showing port status ■ support for hot-swappable XFP transceiver modules Front vie w XEM-1 XP The follo wing LEDs re port operations and faults on the XEM-1 XP .
Expansion Modules 8 For the latest list of appr ov ed XFP transceiv er modules, contact y our authorised Allied T elesis distributor or r eseller. See t he most cur rent r ev ision a vailable of the XEM datasheet (document number 617 -000034) for further information about which XFP transceiver module s are appr oved for use with the XEM-1XP .
Installation Guide 9 XEM-2XP Dual 10 Gigabit XFP P or ts The XEM-2 XP Dual 10 Gigabit Ethernet expansion module featur es: ■ two XFP ports ■ four LEDs (one set f or each XFP port) showing port status ■ support for hot-swappable XFP transceiv er modules Front vie w XEM-2 XP The follo wing LEDs re port operations and faults on the XEM-2XP .
Expansion Modules 10 For the latest list of appr ov ed XFP transceiv er modules, contact y our authorised Allied T elesis distributor or r eseller. See t he most cur rent r ev ision a vailable of the XEM datasheet (document number 617 -000034) for further information about which XFP transceiver module s are appr oved for use with the XEM-2XP .
Installation Guide 11 XEM-2XS Dual 10 Gigabit SFP+ P or ts The XEM-2 XS Dual 10 Gigabit Ethernet expansi on module featur es: ■ two SFP+ ports ■ four LEDs (one set f or each SFP+ port) showing por.
Expansion Modules 12 For the lat est list of appr ov ed SFP+ fibr e transceiv ers and Dir ect Attach copper modules, contact y our authorised Allied T elesis distributor or r eseller.
Installation Guide 13 XEM-12S 100/1000 BASE-X SFP P or ts The XEM-12 S 12-port 100/1000B ASE-X expansion module f eatures: ■ two r ows of 6 SFP por ts ■ LEDs showing port status ■ support for hot-swa ppable SFP transceiv er modules ■ NEBS compliant Front vie w XEM-12 S The follo wing LEDs re port operations and faults on the XEM-12 S.
Expansion Modules 14 For the latest list of appr ov ed SFP transc eiv er modules, contact y our authorised Allied T elesis distributor or r eseller. See t he most cur rent r ev ision a vailable of the XEM datasheet (document number 617 -000034) for further information about which SFP transceiv er modules ar e appr ov ed for us e with the XEM-12S.
Installation Guide 15 XEM-12Sv2 100/1000 BASE-X SFP P or ts The XEM-12 S 12-port 100/1000BASE-X expansion module features: ■ two r ows of 6 SFP ports ■ LEDs showing port status ■ support for hot-swappable SFP transceiver modul es Front vie w XEM-12 Sv2 The follo wing LEDs re port operations and faults on the XEM-12 Sv2.
Expansion Modules 16 For the latest list of appr ov ed SFP transc eiv er modules, contact y our authorised Allied T elesis distributor or r eseller. See t he most cur rent r ev ision a vailable of the XEM datasheet (document number 617 -000034) for further information about which SFP transceiv er modules are appr oved for use with the XEM-12Sv2.
Installation Guide 17 XEM-12T 10/100/1000 BASE-T RJ-45 P or ts The XEM-12 T 12-port RJ-45 expansion modul e featur es: ■ two r ows of 6 RJ-45 ports ■ gigabit ports that support speeds of 10/100/10.
Expansion Modules 18 Caution Allied T elesis recommends waiting 3 0 seconds after hot swapping any XEM bef ore resuming norm al operations. The s witch must full y complete the bootup process bef ore y ou can hot swap an y XEM. Also ensur e the XEM fastening thumbscr ews ar e fully tigh tened.
Installation Guide 19 XEM-12Tv2 10/100/1000 BASE-T RJ-45 P or ts The XEM-12 Tv2 12-port RJ-45 expansion module featur es: ■ two r ows of 6 RJ-45 ports ■ gigabit ports that support speeds of 10/100.
Expansion Modules 20 Caution Allied T elesis recommends waiting 3 0 seconds after hot swapping any XEM bef ore resuming norm al operations. The s witch must full y complete the bootup process bef ore y ou can hot swap an y XEM. Also ensur e the XEM fastening thumbscr ews ar e fully tigh tened.
Installation Guide 21 XEM-2XT Dual 10G BASE-T RJ-45 P or ts The XEM-2 XT Dual 10 GBASE-T RJ-45 expansion module features: ■ two 10GBASE-T RJ-45 ports ■ LEDs showing port status Front vie w XEM-2 XT The follo wing LEDs re port operations and faults on the XEM-2XT .
Expansion Modules 22 XEM-24T 24 T ri-speed Gigabit Copper P or ts The XEM-24 T 24-port RJ Point Fiv e expansion module featur es: ■ two r ows of 12 RJ P oint Five ports ■ gigabit ports that suppor.
Installation Guide 23 Caution Allied T elesis recommends waiting 3 0 seconds after hot swapping any XEM bef ore resuming norm al operations. The s witch must full y complete the bootup process bef ore y ou can hot swap an y XEM. Also ensur e the XEM fastening thumbscr ews ar e fully tigh tened.
Expansion Modules 24 XEM-STK Stacking P or ts The XEM-STK dual-port stacking expansion module featur es: ■ two 15 Gb ps full duplex stacking connections ■ LEDs showing port and stack member status.
Installation Guide 25 A choice of 0.5 m or 2.0 m stacking cables can be or der ed separately . For the latest list of a ppro ved c ables, contact y our authorised Allied T elesis distributor or rese ller. The Select button r esets the stack ID of this switch to 1, and causes the other members of the stack to be ren umber ed.
Expansion Modules 26 Installation Pr ocedur e The installation pr ocedur e and XEMs supported by each swit ch depend on the operating system running on the sw itch. AlliedW are Plus™ Operating System Switches running the AlliedW ar e Plus™ operating system support all XEMs.
Installation Guide 27 ■ Gather necessary tools. Y ou ma y need a Phil lips #2 scre wdrive r to adjust the thumbsc re ws on the XEM. Installing or replacing XEMs without hot swap support Follo w this.
Expansion Modules 28 10. Restart the switch and v erify the installati on. If you h a ve a terminal connected to the asyn0 p ort, any err or message is displa y ed during startup self-tests. Confirm there is no err or message about installation in the lo g file and that the switch has recognised th e XEM.
Installation Guide 29 6. V e rify the installation. If you h a ve a terminal connected to the asyn0 p ort, any err or message is displa y ed during installation.
Expansion Modules 30 Obtaining Documentation and Resour ces The complete docume nt set for x900 Series s witches and SwitchBlade x908 includes: ■ this Installation Guide ■ the x900 Ser ies Switc h.
Installation Guide 31 Contacting us With locations co veri ng all of the established mark ets in North America, Latin America, Eur ope, Asia, and the Pacific , Allied T elesis pro vides localized sales and technical support worl dwide. T o find the r e pr esentative n earest you, visit us on the W eb at www.
Een belangrijk punt na aankoop van elk apparaat Allied Telesis XEM-1XP (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Allied Telesis XEM-1XP heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Allied Telesis XEM-1XP vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Allied Telesis XEM-1XP leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Allied Telesis XEM-1XP krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Allied Telesis XEM-1XP bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Allied Telesis XEM-1XP kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Allied Telesis XEM-1XP . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
