Gebruiksaanwijzing /service van het product POEGEM12T2SFP van de fabrikant Alloy
Ga naar pagina of 234
User Manual POEGEM12T2SFP 12 Port Gigabit SNMP Managed POE Switch 12x 10/100/1000Mbp s port s + 2 p a ired SFP Port s V ersion: 1.01 April, 2006.
POEGEM12T2SFP User Manual Alloy Computer Products Pty Lt d Copyright ©2006 T ABLE O F C ONTENTS C AUTION ............................................................................................................................... . IV E LECTRONIC E MISSION N OTICES .
POEGEM12T2SFP User Manual Alloy Computer Products Pty Lt d Copyright ©2006 3-13-2. GVRP Counter .................................................................................................... 79 3-13-3. GVRP Group Information ...................
POEGEM12T2SFP User Manual Alloy Computer Products Pty Lt d Copyright ©2006 Caution Electronic Circuit devices are sensitive to st atic electricity . Dry weather conditions or walki ng across a carpeted floor may cause you to acquire a st atic electric charge.
POEGEM12T2SFP User Manual 1 Alloy Computer Products Pty Lt d Copyright ©2006 About this User Manual This User Manual will guide you on proc edures to inst all, configure and monitor the Alloy 12 port Gigabit SNMP Manage d POE Switch utilising the bu ilt-in web management interface a nd also the CLI.
POEGEM12T2SFP User Manual 2 Alloy Computer Products Pty Lt d Copyright ©2006 1. Introduction 1.1. Overview of th e POEGEM12T2SFP SNMP Mana ged POE Switches The POEGEM12T2SFP features 12 P oE compli ant ports running at 10/100/100 0Mbp s and 2 paired mini-GBIC (SFP) ports.
POEGEM12T2SFP User Manual 3 Alloy Computer Products Pty Lt d Copyright ©2006 The 10/100/1000Mbps co pper ports meet all IEEE 802. 3/u/x/z Gigabit and Fast Ethernet specifications. The 1000Mbps SFP fibre ports via optional mini-GBIC modules are compli ant with all IEEE 802.
POEGEM12T2SFP User Manual 4 Alloy Computer Products Pty Lt d Copyright ©2006 1.2. Checklist Before you start installing your switch, ve rify that the package contains the follo wing: • A POEGEM12T2.
POEGEM12T2SFP User Manual 5 Alloy Computer Products Pty Lt d Copyright ©2006 • Supports Port Based and 802.1Q VLAN’s • Supports user management via web inte rface and limits three u s ers to lo.
POEGEM12T2SFP User Manual 6 Alloy Computer Products Pty Lt d Copyright ©2006 1.4.1. User Interfaces on the Front Panel (Button, LED's and Plugs) There are 12x copper RJ-45 Gigabit Ethern et por ts and 2x paired SFP fibre ports for optional mini-GBIC modules on the front panel of the swit ch.
POEGEM12T2SFP User Manual 7 Alloy Computer Products Pty Lt d Copyright ©2006 1.4.2. User Interfaces on the Rear Panel 1.5. Overview of th e Optional SFP Modules With the POEGEM12T2SFP switch, the SFP ports are paired with RJ-45 copper ports 11 and 12.
POEGEM12T2SFP User Manual 8 Alloy Computer Products Pty Lt d Copyright ©2006 Fig. 1-4: Front View of 1000Base-SX/LX LC, SFP Fibre Transceive r Fig. 1-5: Front View of 1000Base-LX WDM L C SFP Fibre Tr.
POEGEM12T2SFP User Manual 9 Alloy Computer Products Pty Lt d Copyright ©2006 2. Installation 2.1. St arting the POEGEM12T2SFP SNMP Managed POE Switches This section provides a quick st art guide for: • Hardware and Cable Inst al lation • Management S tation Inst all ation • Software booting and confi guratio n 2.
POEGEM12T2SFP User Manual 10 Alloy Computer Products Pty Lt d Copyright ©2006 • Copper Ports - Cable Inst allation Please Note: ⇒ The RJ-45 ports o n the POEGEM12T2SFP support MDI/MDI-X auto-crossover functionality .
POEGEM12T2SFP User Manual 11 Alloy Computer Products Pty Lt d Copyright ©2006 2.1.2. Cabling Requirement s T o help ensure a successful installatio n a nd keep network performa nce at optimu m levels, take care to use Cat.5e grade or higher cabli ng.
POEGEM12T2SFP User Manual 12 Alloy Computer Products Pty Lt d Copyright ©2006 Cont. Please Note: ⇒ Further information can be found in section 1.5 on page 7 ⇒ All figures denoting the range a given cable type can achieve must be treated as maximum values.
POEGEM12T2SFP User Manual 13 Alloy Computer Products Pty Lt d Copyright ©2006 T o set or change the default IP address of the swit ch via the console port, plea se follow the steps below: 1. Log into the switch via hyper terminal using the above settings.
POEGEM12T2SFP User Manual 14 Alloy Computer Products Pty Lt d Copyright ©2006 2.1.3.2. Configuring th e POEGEM12T2SFP through the Ethern et Po rt There are three diff erent m ethods of configuring the POEGEM12T2 SFP through the Ethernet Port. They are CLI, W eb Browser and via SNMP Management Software.
POEGEM12T2SFP User Manual 15 Alloy Computer Products Pty Lt d Copyright ©2006 If using the CLI open a command prompt and create a te lnet session to the defa ult IP Address of the switch. Y ou will now be prompted to log into the switch, the default use rname and password is sho w n below: Username: admin Password: admin Fig .
POEGEM12T2SFP User Manual 16 Alloy Computer Products Pty Lt d Copyright ©2006 3. Operation of the Web Based Management The following chapter allows the admini strator to monitor and manage the POE GEM12T2SFP through the web management interface. Managem e nt function ality such as Port Based and 802.
POEGEM12T2SFP User Manual 17 Alloy Computer Products Pty Lt d Copyright ©2006 3-1. Web Management Home Overview Once you have entered a valid username and p a ssword and logged into the switch the System Information page will b e displaye d, this is the def ault page, it will be displayed every time that you log into the switch.
POEGEM12T2SFP User Manual 18 Alloy Computer Products Pty Lt d Copyright ©2006 - System Information Page Layout At the top of the page, there is a picture of the front p anel of t he switch. The picture displays the port status of each of the port s on the switch.
POEGEM12T2SFP User Manual 19 Alloy Computer Products Pty Lt d Copyright ©2006 3-1-1. System Information Allows the Administrator to view basic system settings. Fig. 3-5 Function Name: System Information Function Description: Shows the basic sy stem inf ormatio n Parameter Description: Model Name: The model name of the device.
POEGEM12T2SFP User Manual 20 Alloy Computer Products Pty Lt d Copyright ©2006 System Up T ime: The time accumulated since last power up. Format is Day , Hour , Minute, Second. (Read Only) Current Ti m e: Shows the system time of the switch. Form at is Day of week, Month, Day , Hours, Minutes, Seconds, Y ear .
POEGEM12T2SFP User Manual 21 Alloy Computer Products Pty Lt d Copyright ©2006 3-1-2. IP Configuration The IP configuration i s used to set the IP se ttings in the switch. The POEGEM12T2SFP support s either a static IP address allocated via the system administrator o r can b e assig ned an IP address dynamically from a DHCP server on yo ur network.
POEGEM12T2SFP User Manual 22 Alloy Computer Products Pty Lt d Copyright ©2006 Subnet Mask: Y ou will also need to specify a Subnet Mask to be u sed on your network. Enter the required Subnet Mask in the spa ce provided. Click the < apply > button to update.
POEGEM12T2SFP User Manual 23 Alloy Computer Products Pty Lt d Copyright ©2006 3-1-3. Time Configuration The POEGEM12T2SFP provides two methods to keep the switch’ s time settings correct, they are via manual input and via a T ime Server on the internet.
POEGEM12T2SFP User Manual 24 Alloy Computer Products Pty Lt d Copyright ©2006 NTP is used t o sync the network time with a time serv er on the internet based on the Greenwich Mean T ime (GMT).
POEGEM12T2SFP User Manual 25 Alloy Computer Products Pty Lt d Copyright ©2006 3-1-4. Account Configuration The account configuration is used to create or modify guest and administrator ac cou nts. The POEGEM12T2SFP allows the admini strator to create up to 5 guest account s , accounts can onl y be created by the administrator .
POEGEM12T2SFP User Manual 26 Alloy Computer Products Pty Lt d Copyright ©2006 Please enter a username for the admini strator or guest account, a maximum of 15 alphanumeric chara cters only . Password: Please enter a pa sswo rd for the administrator or guest account, a maximum of 15 alphanumeric chara cters only .
POEGEM12T2SFP User Manual 27 Alloy Computer Products Pty Lt d Copyright ©2006 3-1-5. Management Security Configuration The Management Security Configuration is used to implement se curity rules based on what type of management access a certain u ser has.
POEGEM12T2SFP User Manual 28 Alloy Computer Products Pty Lt d Copyright ©2006 Incoming Port: If you want to lock the management interface access down to cert ain ports on your switch please select the Custom radio button and tick the req uired ports which will allow/deny access to the management.
POEGEM12T2SFP User Manual 29 Alloy Computer Products Pty Lt d Copyright ©2006 3-1-6. Virtual S tack Configuration The Virtual S tack function allows multiple POEGEM12T2SFP switches to be managed from a single IP Address. One POEGEM12T2SFP switch will be config ured as a Master and all other POEGEM12T2SFP swit ches will be configured as Slaves.
POEGEM12T2SFP User Manual 30 Alloy Computer Products Pty Lt d Copyright ©2006 3-2. Port Configuration The Port Configuration section consi st s of four sub sections S tatus, Configuration, Simple Counter and Detail Counter . These four sections are used to control and monito r all ports on t he POEGEM12T2SFP switch.
POEGEM12T2SFP User Manual 31 Alloy Computer Products Pty Lt d Copyright ©2006 Function Name: Port S tatus Function Description: Reports the current S tatus of each port; if the state of a port chang e s the status screen will refresh every 5 seconds.
POEGEM12T2SFP User Manual 32 Alloy Computer Products Pty Lt d Copyright ©2006 If you have a valid link on a Fibre port you will be able to see some detailed information for that port by clicking on the port number in the Port S tatus screen.
POEGEM12T2SFP User Manual 33 Alloy Computer Products Pty Lt d Copyright ©2006 Displays the part number of the SFP module. V endor Rev: Displays the revision number of the SFP module. V endor SN: Displays the serial number of the SFP module. Date Code: Displays the date the SFP module was manufactured.
POEGEM12T2SFP User Manual 34 Alloy Computer Products Pty Lt d Copyright ©2006 3-2-2. Port Configuration The Port Configuration section allows the admin i strat or to Enable or Disable a port, turn aut o negotiation on or of f for a particular port and al so force the speed and dupl ex settings of each port.
POEGEM12T2SFP User Manual 35 Alloy Computer Products Pty Lt d Copyright ©2006 device that is having trouble linking whe n runni ng in Auto mode you made need to manually force the speed and duplex settings of the port.
POEGEM12T2SFP User Manual 36 Alloy Computer Products Pty Lt d Copyright ©2006 3-2-3. Simple Counter The Simple Counter section allows the administ ra tor to view information regarding the amount of data that is being p assed through a particul ar port whether the p ackets are good or bad.
POEGEM12T2SFP User Manual 37 Alloy Computer Products Pty Lt d Copyright ©2006 RX Error Packet: Displays the total amount of bad p ackets received. Refresh Interval: The user can define the amount of time t he switch will t ake to update the ports statistics.
POEGEM12T2SFP User Manual 38 Alloy Computer Products Pty Lt d Copyright ©2006 3-2-3. Det ail Counter The Detail Counter sectio n allows the administrato r to view information regarding the amount of data that is being p assed through a particul ar port whether the p ackets are good or bad.
POEGEM12T2SFP User Manual 39 Alloy Computer Products Pty Lt d Copyright ©2006 RX Multicast: Displays the total numb er o f multicast packet s received. TX Packet s : Displays the total numb er o f packet s transmitted. TX Octet s: Displays the total numb er o f transmitted bytes.
POEGEM12T2SFP User Manual 40 Alloy Computer Products Pty Lt d Copyright ©2006 TX 512 ~ 1023 Bytes: Displays the total number o f 512 ~ 1023 byte frames transmitted. TX 1024 Bytes: Displays the total number o f 1024 byte frames transmitted. RX CRC/Alignment: Displays the total number o f Alignment and CRC error packet s received.
POEGEM12T2SFP User Manual 41 Alloy Computer Products Pty Lt d Copyright ©2006 3-3. POE The POEGEM12T2SFP supports the IEEE 802.3af Po E st andard for Power Injection (PSE). This injects PoE powe r onto the Cat5 Cable when it det ect s the presence of a PoE compliant device.
POEGEM12T2SFP User Manual 42 Alloy Computer Products Pty Lt d Copyright ©2006 T emperature: The temperature of the POE chip set inside the switch. Port No: The port number of each port on the swi t ch. Port On: Display’s whe ther the port is supplying power .
POEGEM12T2SFP User Manual 43 Alloy Computer Products Pty Lt d Copyright ©2006 3-3-1. POE Configuration Fig. 3-18 Function Name: POE Configuration Function Description: The POE Configuration screen allows the administrator to set a pri ority level to each of the POE ports on the switch.
POEGEM12T2SFP User Manual 44 Alloy Computer Products Pty Lt d Copyright ©2006 Power (W): The total power been drawn from ea ch port. Current (mA): The total current supplied to the PD.
POEGEM12T2SFP User Manual 45 Alloy Computer Products Pty Lt d Copyright ©2006 3-4. Mirror The Mirror function of the POEGEM12T2SFP switches is used to capture data from a particular port on the switch.
POEGEM12T2SFP User Manual 46 Alloy Computer Products Pty Lt d Copyright ©2006 3-5. Bandwid th The Bandwidth Manag ement function of the POEGEM12T2SFP swi tches is used to limit the bandwidt h a port may use whe n sending or receiv ing dat a.
POEGEM12T2SFP User Manual 47 Alloy Computer Products Pty Lt d Copyright ©2006 Broadcast & Multicast for Ingress Rate Limiting (Policing): Is used to set up the limit of Ingress bandwidth the port is allowed to utilise before traffic will be di scarded.
POEGEM12T2SFP User Manual 48 Alloy Computer Products Pty Lt d Copyright ©2006 3-6. QOS (Quality of Service) The switch of fers po werful QoS functions includin g : Per Port Priority where you can set.
POEGEM12T2SFP User Manual 49 Alloy Computer Products Pty Lt d Copyright ©2006 Fig. 3-22 Function Name: VLAN T ag Priority Function Description: The POEGEM12T2SFP al lows the administrator to configure priority levels base d on a priority field found inside the VLAN T ag.
POEGEM12T2SFP User Manual 50 Alloy Computer Products Pty Lt d Copyright ©2006 Fig. 3-23 Function Name: IP TOS Classifica tion Function Description: The POEGEM12T2SFP al lows the administrator to configure priority levels base d on the TOS field of the IP Header .
POEGEM12T2SFP User Manual 51 Alloy Computer Products Pty Lt d Copyright ©2006 Fig. 3-24 Function Name: IP TCP/UDP Port Classification Function Description: The POEGEM12T2SFP allows the administrator to configure QoS rules b ased on Layer 4 networking protocol s su ch as HTTP , FTP etc.
POEGEM12T2SFP User Manual 52 Alloy Computer Products Pty Lt d Copyright ©2006 want to customise the port s that are in us e by this built in service click on the advanced tab to make the nec essary changes. Cli ck the <Apply > button for changes to take effect.
POEGEM12T2SFP User Manual 53 Alloy Computer Products Pty Lt d Copyright ©2006 - Prioritise S treaming Audio/V ideo: 2979, 1755, 7070, 7071, 554, 800 0 - Prioritise Database s (Oracle, IBM DB2, SQL, Microsof t): 66, 1571, 1575, 523, 1 18, 156, 3306, 1232, 1433, 1434 Fig.
POEGEM12T2SFP User Manual 54 Alloy Computer Products Pty Lt d Copyright ©2006 Function Name: IP Dif fse rve Classification: Function Description: The POEGEM12T2SFP al lows the administrator to configure priority levels base d on the 6-bit field in the DSCP of the IP packet.
POEGEM12T2SFP User Manual 55 Alloy Computer Products Pty Lt d Copyright ©2006 3-7. SNMP Configuration Any Network Management System (NMS ) runni ng the Simple Network Manage ment Protocol (SNMP) can .
POEGEM12T2SFP User Manual 56 Alloy Computer Products Pty Lt d Copyright ©2006 Get/Set/T rap Community: The Community name is used as a p asswo rd for authentication to the Network Management software that is bein g used. If they both don’t have the same community name, they don’t belong to the same group.
POEGEM12T2SFP User Manual 57 Alloy Computer Products Pty Lt d Copyright ©2006 3-8. IGMP Snooping IGMP Snoopi ng is u sed to establish multica st groups to forward multicast p ackets to each of the multicast member port s, and, in nature, avoids wasting bandwi dth with IP multicast packets.
POEGEM12T2SFP User Manual 58 Alloy Computer Products Pty Lt d Copyright ©2006 Active: When using Active mode the switch will periodically issue the membership query message to all hosts attached to the switch and update the multicast table respectively .
POEGEM12T2SFP User Manual 59 Alloy Computer Products Pty Lt d Copyright ©2006 3-9. Max. Packet Length The POEGEM12T2SFP support s Jumbo frames up to 9k in size to allow transmission of larg e amounts of dat a in a network environment.
POEGEM12T2SFP User Manual 60 Alloy Computer Products Pty Lt d Copyright ©2006 3-10. DHCP Boot The POEGEM12T2SFP suppo rt s DHCP Broadcast Suppr ession allowing the switch to suppress broadcast traf fic.
POEGEM12T2SFP User Manual 61 Alloy Computer Products Pty Lt d Copyright ©2006 3-1 1. VLAN (Virtual Local Area Netw ork) The POEGEM12T2SFP supports b oth 802.1q T agged based VLA N’ s and Port-based VLAN’s. VLAN’s are used to logicall y separate your network into smaller more defined n etworks.
POEGEM12T2SFP User Manual 62 Alloy Computer Products Pty Lt d Copyright ©2006 two VLAN groups. The switch has suppor t for up to 24 port-based VLAN group s. T ag-based: T ag-based VLAN’s identify members by its VID. A VID can be applied to a packet from a host machine that support s 802.
POEGEM12T2SFP User Manual 63 Alloy Computer Products Pty Lt d Copyright ©2006 Uplink Port: This option is only available when Metro Mode is used. 11 : Each port of the switch can no longer communi ca.
POEGEM12T2SFP User Manual 64 Alloy Computer Products Pty Lt d Copyright ©2006 3-1 1-2. T ag-based Group Fig. 3-34 Function name: Tag-based Group Configuration Function description: Shows information of the existing tag-based VLAN groups, the administrator can also Add, Delete and Edit VLAN’s using the function buttons provided.
POEGEM12T2SFP User Manual 65 Alloy Computer Products Pty Lt d Copyright ©2006 settings to take effect. Fig. 3-35 Delete: Highlight the VLAN group you wish to delete and click the Del ete button to remove the VLAN group from the table.
POEGEM12T2SFP User Manual 66 Alloy Computer Products Pty Lt d Copyright ©2006 Fig. 3-37 3-1 1-3. Port-based Group Fig. 3-38 Function name: Port-based Group Configuration Function description: Shows information of the existing port-based VLAN groups, the administrator can al so Add, Delete and Edit VLAN’s using the function buttons provided.
POEGEM12T2SFP User Manual 67 Alloy Computer Products Pty Lt d Copyright ©2006 Parameters description: VLAN Name: Is the name of the VLAN group defined by the Administrator . V alid characters that can be used are A – Z, a – z and 0 – 9. S pecial characters are not allowed and a total of 15 characte rs are su pported.
POEGEM12T2SFP User Manual 68 Alloy Computer Products Pty Lt d Copyright ©2006 Fig. 3-40 Edit: Highlight the VLAN group you wish to edit and click t he Edit button to modify the selected VLAN group.
POEGEM12T2SFP User Manual 69 Alloy Computer Products Pty Lt d Copyright ©2006 3-1 1-4. T ag Rule Fig. 3-42 Function name: Tag Rule Function description: The administrator can appl y a VID to each port of th e switch; the valid range of the VID is from 1 to 4094.
POEGEM12T2SFP User Manual 70 Alloy Computer Products Pty Lt d Copyright ©2006 Rule 2: Drop untagge d frame. Y ou can configure a given port to accept all frames t agged and untagged or just to receive tagge d frames. If the forme r is the case, then packet s that are tag ged o r untagged will be processed.
POEGEM12T2SFP User Manual 71 Alloy Computer Products Pty Lt d Copyright ©2006 3-12. MAC T able The MAC T able configurati on can be used by the ad ministrator to st atically add MAC entries to the sw.
POEGEM12T2SFP User Manual 72 Alloy Computer Products Pty Lt d Copyright ©2006 Search: Is used to search for MAC addresses that are conne cted to the switch. The search will depend on the criteria entered in the abov e section. For example if you have all ports selected the swit ch will display all MAC address connected to all ports of the switch.
POEGEM12T2SFP User Manual 73 Alloy Computer Products Pty Lt d Copyright ©2006 3-12-2. MAC T able Maintenance Fig. 3-45 Function name: MAC Table Maintenance Function description: Allows the administrator to set the MA C age time out value and allows you to flush the Mac table of the switch.
POEGEM12T2SFP User Manual 74 Alloy Computer Products Pty Lt d Copyright ©2006 3-12-3. St atic Forward Fig. 3-46 Function name: Static Forward Function description: The Static Forward function is used to associ ate a MAC address to a particular port of the switch.
POEGEM12T2SFP User Manual 75 Alloy Computer Products Pty Lt d Copyright ©2006 3-12-4. St atic Filter Fig. 3-47 Function name: Static Filter Function description: The Static Filter function allows the administrator to block MA C addresse s from being forwarded by the switch.
POEGEM12T2SFP User Manual 76 Alloy Computer Products Pty Lt d Copyright ©2006 3-12-5. MAC Alias Fig. 3-48 Function name: MAC Alias Function description: The MAC Alias function is used to assign a use r frien dly name to a MAC Address. Enter the MAC address and its assig ned Alias name and clic k the Create/Edit button to add this entry.
POEGEM12T2SFP User Manual 77 Alloy Computer Products Pty Lt d Copyright ©2006 3-13. GVRP The GARP (Generic Attribute Registration Protocol ) VLAN Registration Proto col (GVRP) defines a GARP application that provides the 8 0 2.1 Q-compliant VLAN pruning and dynamic VLAN creation on 802.
POEGEM12T2SFP User Manual 78 Alloy Computer Products Pty Lt d Copyright ©2006 Join Time: Used to specify the Join T ime in units of 100 th of a Second, V alid time range is 20 – 100. Default: 20 Leave Time: Used to specify the Leave T ime in units of 100 th of a Second, V alid time range is 60 – 300.
POEGEM12T2SFP User Manual 79 Alloy Computer Products Pty Lt d Copyright ©2006 Enabled: The switch will not create dynamic VLAN’ s when this port receives GVRP BDU, except if it receives a dynamic VLAN message and the GVRP PDU is an existing static VLAN entry .
POEGEM12T2SFP User Manual 80 Alloy Computer Products Pty Lt d Copyright ©2006 Join In Message Packet s: The total number of GARP BPDU with Join In Messages received by the GARP application. Leave Empty Message Packet s: The total number of GARP BPDU with Leave Empty Messages received by the GARP appli c ation.
POEGEM12T2SFP User Manual 81 Alloy Computer Products Pty Lt d Copyright ©2006 3-13-3. GVRP Group Information Fig. 3-51 Function name: GVRP Group Function description: Displays the dynamic group members and their relev ant information. Parameters description: VID: VLAN Identifier .
POEGEM12T2SFP User Manual 82 Alloy Computer Products Pty Lt d Copyright ©2006 3-14. STP The S panning T ree Protocol (STP) is a standar dised method (IEE E 802.1D) for avoiding loo ps in switched networks. Whe n STP is enabl ed, the sw itch will ensure that only one path is active between any two nodes on the network at a time.
POEGEM12T2SFP User Manual 83 Alloy Computer Products Pty Lt d Copyright ©2006 Designated Priority: Shows the current root bridge prio rity . Root Port: Shows the port number connected to the r oot bri dge with the lowest path cost. Root Path Cost: Shows the path cost betwe en the root po rt and the designated port of the root bridge.
POEGEM12T2SFP User Manual 84 Alloy Computer Products Pty Lt d Copyright ©2006 3-14-2. STP Configuration Fig. 3-53 Function name: STP Configuration Function description: Used to configure the spanning tree param eters including, enabling and disabling, selecting to use STP or RSTP and you can also change the Bridge Priority, Hel lo Time, Max.
POEGEM12T2SFP User Manual 85 Alloy Computer Products Pty Lt d Copyright ©2006 Max. Age: If the POEGEM12T2SFP is the root brid ge, the whol e network will apply this figure as their maximum age time.
POEGEM12T2SFP User Manual 86 Alloy Computer Products Pty Lt d Copyright ©2006 3-14-3. STP Port Configuration Fig. 3-54 Function name: STP Port Configuration Function description: The STP Port setting is used to configure the “path co st”, “priority”, “admin ed ge port” and the “admin point to point” settings.
POEGEM12T2SFP User Manual 87 Alloy Computer Products Pty Lt d Copyright ©2006 Configured Path Cost: If the path cost is equal to zero, the p ath cost will be auto-negotiated and displayed in the path co st st atus field. Otherwise the value that the administrator has set manually will be displayed.
POEGEM12T2SFP User Manual 88 Alloy Computer Products Pty Lt d Copyright ©2006 3-15. T runking Configuration Port T runking is used to Aggregate Ports into a logical trunk usually called Link Aggregation.
POEGEM12T2SFP User Manual 89 Alloy Computer Products Pty Lt d Copyright ©2006 3-15-1. T runk Port Settings/St atus Fig. 3-55 Function name: Port Settings/Status Function description: Port Settings/Status is used to configure t he trunk properties of each port on the switch.
POEGEM12T2SFP User Manual 90 Alloy Computer Products Pty Lt d Copyright ©2006 Passive: A Passive LACP port will n ot send LACPDU to its lin k partner until it receives LACPDU from the link partner . Aggtr: Aggtr is an abbreviation of “Aggregator ”.
POEGEM12T2SFP User Manual 91 Alloy Computer Products Pty Lt d Copyright ©2006 3-15-2. Aggregator View Fig. 3-56 Function name: Aggregator View Function description: Shows the current port trunking informati on from the a ggregator point of view. Parameters description: Aggregator: Shows the aggregator ID of every port.
POEGEM12T2SFP User Manual 92 Alloy Computer Products Pty Lt d Copyright ©2006 3-15-2-1. LACP Det ail Fig. 3-57 Function name: LACP Detail (LACP Aggregator Detailed Information Function description: Shows detailed information rega rdi ng the LACP trunking group Parameters description: Actor: The switch that you are managing.
POEGEM12T2SFP User Manual 93 Alloy Computer Products Pty Lt d Copyright ©2006 3-15-3. LACP Sy stem Priority Fig. 3-58 Function name: LACP System Priority Function description: The LACP System Priority is used to set the priority of the LACP system ID.
POEGEM12T2SFP User Manual 94 Alloy Computer Products Pty Lt d Copyright ©2006 3-16. 802.1x Configuration The 802.1x port-based network access control prov id es a method to restrict user s to access network resources via aut henticating user ’s inform at ion.
POEGEM12T2SFP User Manual 95 Alloy Computer Products Pty Lt d Copyright ©2006 The overview of the 802.1x operation shown in Fig. 3-59 is quite simple. When the Supplicant P AE issues a request to the Authenticator P AE, the Authenticator and the Supplicant exchange authentication messages.
POEGEM12T2SFP User Manual 96 Alloy Computer Products Pty Lt d Copyright ©2006 In the Fig. 3-60, this is the typical configur ation, a single supplicant, an authenticator and a n authentication server .
POEGEM12T2SFP User Manual 97 Alloy Computer Products Pty Lt d Copyright ©2006 3-16-1. St ate Fig. 3-61 Function name: 802.1x State Setting Function description: This function is used to configure the gl obal parameters for the RADIUS authentication used with the 802.
POEGEM12T2SFP User Manual 98 Alloy Computer Products Pty Lt d Copyright ©2006 3-16-2. Mode Fig. 3-62 Function name: 802.1x Mode Setting Function description: This function is used to set the operation mode of 802.1x for ea ch individual port and only supports Multihost or Disable d mod es.
POEGEM12T2SFP User Manual 99 Alloy Computer Products Pty Lt d Copyright ©2006 3-16-3. Security Fig. 3-63 Function name: Port Security Management Function description: Shows the status of each port, the port numbe r, and if the port is authorised or unautho rised.
POEGEM12T2SFP User Manual 100 Alloy Computer Products Pty Lt d Copyright ©2006 3-16-4. Parameter Setting Fig. 3-64 Function name: Parameter Setting Function description: This section is used to configure the pa rameter settings for each port usin g 802.
POEGEM12T2SFP User Manual 101 Alloy Computer Products Pty Lt d Copyright ©2006 Period of time in seconds to transmit EAPOL PDU between the authenticator and the supplicant. Default: 30 Quiet period (0 – 65535 sec.): Period of time in which we will not attempt to access the supplicant.
POEGEM12T2SFP User Manual 102 Alloy Computer Products Pty Lt d Copyright ©2006 3-17. Alarm Configuration The POEGEM12T2SFP support s a n umber of trap messages that can be sen t to an administrator if certai n event s occur on the switch .
POEGEM12T2SFP User Manual 103 Alloy Computer Products Pty Lt d Copyright ©2006 Link Down: T ick the required trap method check box to enable a trap to be sent when a port on the switch loses lin k. Link Up: T ick the required trap method check box to enable a trap to be sent when a port on the switch establishe s link.
POEGEM12T2SFP User Manual 104 Alloy Computer Products Pty Lt d Copyright ©2006 T ick the required trap method check box to enable a trap to be sent when GVRP has been enabled. VLAN Disabled: T ick the required trap method check box to enable a trap to be sent when VLAN support has been disable d.
POEGEM12T2SFP User Manual 105 Alloy Computer Products Pty Lt d Copyright ©2006 3-17-2. Email/SMS Configuration Fig. 3-66 Function name: Email/SMS Configuration Function description: The Alarm Configuration is used to confi gure who should re ceive t he trap messages via Email, SMS or both which have been sent from the POEGEM12T2 SFP.
POEGEM12T2SFP User Manual 106 Alloy Computer Products Pty Lt d Copyright ©2006 Password: Enter the password req uire d by the SMS serve r . Email Address 1 – 6: Enter the mobile phone nu mber(s) that will rece ive the trap messages.
POEGEM12T2SFP User Manual 107 Alloy Computer Products Pty Lt d Copyright ©2006 3-18. Configuration The POEGEM12T2SFP support s m ultiple configurat ion files to be used by the admini strator including the default configuration, st art configurat ion and user configuration.
POEGEM12T2SFP User Manual 108 Alloy Computer Products Pty Lt d Copyright ©2006 3-18-2. Config File Fig. 3-68 Function name: Configure Export/Import File Path Function description: Used by the administrator to Export and Impor t the start and user configuration files.
POEGEM12T2SFP User Manual 109 Alloy Computer Products Pty Lt d Copyright ©2006 Import User-Conf: After configuring the import p a th click on the import user-conf button to import the User-Conf configuration file. 3-19. Diagnostics Three Diagnostic tools are supported in the POEGEM12T2SFP including Diagnostics, Loopback test and Ping test.
POEGEM12T2SFP User Manual 1 10 Alloy Computer Products Pty Lt d Copyright ©2006 3-19-2. Loopback T est Fig. 3-70 Function name: Loopback Test Function description: The POEGEM12T2SFP supports two t y pes of loopback tests including a n Internal and an External loopback test.
POEGEM12T2SFP User Manual 111 Alloy Computer Products Pty Lt d Copyright ©2006 3-19-3. Ping T est Fig. 3-71 Function name: Ping Test Function description: The POEGEM12T2SFP supports a ping test functio n to allow the switch to test communication between ot her IP base d devices.
POEGEM12T2SFP User Manual 1 12 Alloy Computer Products Pty Lt d Copyright ©2006 3-20. TFTP Server Fig. 3-72 Function name: TFTP Server Function description: Used to set the IP address of the TFTP Server. Parameters description: Server: Enter the IP addres s of the TFTP Server .
POEGEM12T2SFP User Manual 1 13 Alloy Computer Products Pty Lt d Copyright ©2006 3-21. Log Fig. 3-73 Function name: Log Data Function description: The Trap Log Data displays all SNMP Privat e trap events, SNMP Public traps a nd all other user logs. The POEGEM12T2SFP support s up to 120 log entries.
POEGEM12T2SFP User Manual 1 14 Alloy Computer Products Pty Lt d Copyright ©2006 3-22. Firmware Upgrade The POEGEM12T2SFP al lows the administrator to upgrade the firmwa re to imp rove the features and capabilities of the switch. The firmware is upgraded via a TFTP server using any Ethernet port on the switch.
POEGEM12T2SFP User Manual 1 15 Alloy Computer Products Pty Lt d Copyright ©2006 3-23. Reboot The POEGEM12T2SFP al lows the Administrator to reboot the switch from the web manageme nt you can also reboot the switch using the re set button on the front panel of the switch.
POEGEM12T2SFP User Manual 1 16 Alloy Computer Products Pty Lt d Copyright ©2006 3-24. Logout Fig. 3-76 Function name: Logout Function description: Used to logout of the web management interface. Parameters description: Logout: Click the Logout button to log out of the management interface.
POEGEM12T2SFP User Manual 1 17 Alloy Computer Products Pty Lt d Copyright ©2006 4. Operation of CLI Management 4-1. CLI Management Refer to chapter 2 for basic installation. When configuring the POEGEM12T 2SF P via the RS -232 con sole please connect the swit ch via the provided serial cable to a DCE device such as a PC.
POEGEM12T2SFP User Manual 1 18 Alloy Computer Products Pty Lt d Copyright ©2006 Fig. 4-1 4-2. Commands of the CLI T o display the list of commands that are supported on the POEGEM12T2SFP CLI type “?” and press enter . All commands on the switch are divide d into 2 groups G lobal commands and Local commands.
POEGEM12T2SFP User Manual 1 19 Alloy Computer Products Pty Lt d Copyright ©2006 Fig. 4-3.
POEGEM12T2SFP User Manual 120 Alloy Computer Products Pty Lt d Copyright ©2006 4-2-1. Global Commands of the CLI exit Synt ax : exit Description : Back to the previous menu. Use this command to navigate back to previou s menus. Argument : None. Possible value: None.
POEGEM12T2SFP User Manual 121 Alloy Computer Products Pty Lt d Copyright ©2006 help Synt ax: help Description: Displays available commands in the current menu. T o display the available commands in any given menu enter the appropriate menu an d type help.
POEGEM12T2SFP User Manual 122 Alloy Computer Products Pty Lt d Copyright ©2006 history Synt ax: history [#] Description: Shows you a list of commands t hat have previously been entered. When you enter this command, the CLI will sh ow a li st of commands which you have entered before.
POEGEM12T2SFP User Manual 123 Alloy Computer Products Pty Lt d Copyright ©2006 logout Synt ax: logout Description: When you enter this command via a T elnet connec tion, you will be automatically logged out of the system and disconnected.
POEGEM12T2SFP User Manual 124 Alloy Computer Products Pty Lt d Copyright ©2006 save user Synt ax: save user Description: T o save the current configuration as the user-defined configuration. When you enter this command, the CLI will save yo ur current configuratio n into the non -volatile FLASH as the user-defined configuration.
POEGEM12T2SFP User Manual 125 Alloy Computer Products Pty Lt d Copyright ©2006 restor e user Synt ax: restor e user Description: T o restore the startup co nfiguratio n as the user defined configuration. If the switch has been correctly restored back to the user d efined configuration you will be prompted immediately to reboot the switch.
POEGEM12T2SFP User Manual 126 Alloy Computer Products Pty Lt d Copyright ©2006 4-2-2. Local Commands of CLI system show Synt ax : show Description : Display’s the basi c information of the switch.
POEGEM12T2SFP User Manual 127 Alloy Computer Products Pty Lt d Copyright ©2006 Synt ax : set location <location string> Description : Enter a descriptive location for the POEGEM12T2SFP . Argument : S tring length up to 32 characters. Possible values: a, b, c, d, .
POEGEM12T2SFP User Manual 128 Alloy Computer Products Pty Lt d Copyright ©2006 IP set ip Synt ax : set ip <ip> <mask> <gateway> Description : T o set the system IP address, subnet mask and gate way .
POEGEM12T2SFP User Manual 129 Alloy Computer Products Pty Lt d Copyright ©2006 enable dhcp Synt ax : enable dhcp <manual o r auto> Description : T o enable the DHCP function and a ssign a DNS Server addre ss manually or a utomatically . Argument : <manual or auto> : enable DHCP and assign DNS address using manual or aut o mode.
POEGEM12T2SFP User Manual 130 Alloy Computer Products Pty Lt d Copyright ©2006 show Synt ax : show Description : T o display the system’s DHCP function state, IP address, subnet mask, default gateway , DNS mode, DNS server IP addre ss and current IP address.
POEGEM12T2SFP User Manual 131 Alloy Computer Products Pty Lt d Copyright ©2006 time set manual Synt ax: set manual <YYYY/MM/DD> <hh:mm:ss> Description: Used to set up the current time manually .
POEGEM12T2SFP User Manual 132 Alloy Computer Products Pty Lt d Copyright ©2006 set daylight sa ving Synt ax: set daylightsaving <hr> <s: MM/DD/hh> <e:MM/DD/hh> Description: Used to configure the daylight savings st art and ending dates.
POEGEM12T2SFP User Manual 133 Alloy Computer Products Pty Lt d Copyright ©2006 Day light Saving End : Mth: 1 Day: 1 Hour: 0.
POEGEM12T2SFP User Manual 134 Alloy Computer Products Pty Lt d Copyright ©2006 account add Synt ax: add guest <name> Description: T o create a new guest user . When you create a new guest user , you must ty pe in a password and then confirm the pa ssword.
POEGEM12T2SFP User Manual 135 Alloy Computer Products Pty Lt d Copyright ©2006 modify Synt ax: modify <name> Description: Used to change the username and p a ssword of an existing account. Argument: <name> : existing user account Possible value: None.
POEGEM12T2SFP User Manual 136 Alloy Computer Products Pty Lt d Copyright ©2006 port set speed-duplex Synt ax : set speed-duplex <range > <auto|10half|10full|100half |100full|1Gfull> Description : Used to configure the speed and du plex setting s of each port.
POEGEM12T2SFP User Manual 137 Alloy Computer Products Pty Lt d Copyright ©2006 show simple-counter Synt ax : show simple-counter Description : Used to display the summary of each port’ s traffic u s age.
POEGEM12T2SFP User Manual 138 Alloy Computer Products Pty Lt d Copyright ©2006 show conf Synt ax : show conf Description : Used to display each port’ s state, speed-du plex and flow control settings.
POEGEM12T2SFP User Manual 139 Alloy Computer Products Pty Lt d Copyright ©2006 clear counter Synt ax : clear counter Description : Used to clear all ports’ counter (include simple a nd d etail port counter) info rmation.
POEGEM12T2SFP User Manual 140 Alloy Computer Products Pty Lt d Copyright ©2006 enable flow-control Synt ax : enable flow-control <range> Description : Used to enable flow control on a p articular port.
POEGEM12T2SFP User Manual 141 Alloy Computer Products Pty Lt d Copyright ©2006 disable flow-control Synt ax : disable flow-control <range> Description : Used to disable flow control on a p articular port.
POEGEM12T2SFP User Manual 142 Alloy Computer Products Pty Lt d Copyright ©2006 mirror set mirror -mode Synt ax : set mirror-mode <rx or disable> Description : Used to set the switches Mirror mode. (rx mode o r d i sabl ed). Argument : <rx | disable> rx : Enable the switch to mirror all re ceiv ed packet s.
POEGEM12T2SFP User Manual 143 Alloy Computer Products Pty Lt d Copyright ©2006 set monitored-port Synt ax : set monitored-port <range> Description : Used to set up the port(s) that will be monitor ed, the packet s received by this port(s) will be copied to the monitoring port.
POEGEM12T2SFP User Manual 144 Alloy Computer Products Pty Lt d Copyright ©2006 bandw id th enable ingress-rate Synt ax : enable ingress-rate <range> <dat a_rate> Description : Used to set up the Ingress-rate of each port on the switch.
POEGEM12T2SFP User Manual 145 Alloy Computer Products Pty Lt d Copyright ©2006 enable egress-rate Synt ax : enable egress-rate <range> <dat a_rate> Description : Used to set up the Egress-rate of each port on the swit ch. Argument : <range>:synt ax 1, 5-7, available from 1 to 12 <data_rate>: 0-1000M bp s.
POEGEM12T2SFP User Manual 146 Alloy Computer Products Pty Lt d Copyright ©2006 d isable storm-rate Synt ax : disable ingress-rate <range> Description : Used to disable the storm-rate of the port.
POEGEM12T2SFP User Manual 147 Alloy Computer Products Pty Lt d Copyright ©2006 show Synt ax : show Description : Used to display all current settings of the bandwi dth rate control.
POEGEM12T2SFP User Manual 148 Alloy Computer Products Pty Lt d Copyright ©2006 QoS set mode Synt ax : set mode <port/pri_ta g/tos/l ayer4/diffse rv > Description : T o set the QoS priority .
POEGEM12T2SFP User Manual 149 Alloy Computer Products Pty Lt d Copyright ©2006 set port Synt ax : set port <range> <class> Description : Used to set a High or Low priority class to all port s being used by port-based QoS. Argument : <range> : port range <class> : class of service setting.
POEGEM12T2SFP User Manual 150 Alloy Computer Products Pty Lt d Copyright ©2006 set tos Synt ax : set tos <port-range> <tos-range> <class> Description : Used to set a priority level to ports ba se d on the T OS field of an IP packet.
POEGEM12T2SFP User Manual 151 Alloy Computer Products Pty Lt d Copyright ©2006 set simple-layer4 Synt ax : set simple-layer4 <#> Description : Used to prioritise data b ased on the TC P/UDP port (Layer 4 traf fic) being used.
POEGEM12T2SFP User Manual 152 Alloy Computer Products Pty Lt d Copyright ©2006 set advance-l ayer4 Synt ax : set advance-layer4 <port-range > <#> <tcp/udp port> <default> <match> Description : Used to prioritise data b ased on the TC P/UDP port (Layer 4 traf fic) being used.
POEGEM12T2SFP User Manual 153 Alloy Computer Products Pty Lt d Copyright ©2006 set diff serv Synt ax : set dif f se rv <ds-ra nge> <clas s> Description : Used to priorit se dat a based on IP Dif fServe qos.
POEGEM12T2SFP User Manual 154 Alloy Computer Products Pty Lt d Copyright ©2006 show Synt ax : show Description : Display’s the informatio n of the mode that you have chosen.
POEGEM12T2SFP User Manual 155 Alloy Computer Products Pty Lt d Copyright ©2006 snmp enable Synt ax : enable snmp enable set-ability Description : Used to enable the SNMP function and configure your com munity name s. Argument : None. Possible value: None.
POEGEM12T2SFP User Manual 156 Alloy Computer Products Pty Lt d Copyright ©2006 set Synt ax : set get-community <community> set set-community <community> set trap <#> <ip> [port] [community] Description : Set is used to configure the setup of the get -community , set-community , trap host ip, host port and trap-community .
POEGEM12T2SFP User Manual 157 Alloy Computer Products Pty Lt d Copyright ©2006 show Synt ax : show Description : Displays the configuration of the SNMP function. Argument : None. Possible value: None. Example: POEGEM12T2SFP(snmp)# show SNMP: Enable Get Community: public Set Community: private [Enable] T r ap Host 1 IP Address: 192.
POEGEM12T2SFP User Manual 158 Alloy Computer Products Pty Lt d Copyright ©2006 max-pkt-len set len Synt ax : set len <range> <length> Description : <range> Port range length (by.
POEGEM12T2SFP User Manual 159 Alloy Computer Products Pty Lt d Copyright ©2006 show Synt ax : show Description : Displays the current Maximum Packet Length of each port.
POEGEM12T2SFP User Manual 160 Alloy Computer Products Pty Lt d Copyright ©2006 igmp set igmp_snooping Synt ax : set igmp_snooping <st atus> Description : Used to set the IGMP Snooping mo de.
POEGEM12T2SFP User Manual 161 Alloy Computer Products Pty Lt d Copyright ©2006 dhcp-boot set dhcp-boot Synt ax : set dhcp-boot <sec> Description : Used to set the delay time for DHCP Broadcast Supp ression. Argument : <sec>:range syntax: 0, 1-30.
POEGEM12T2SFP User Manual 162 Alloy Computer Products Pty Lt d Copyright ©2006 vlan set mode Synt ax: set mode <disable | port | t ag | metro | double-tag> [up-lin k] Description: Used to configure the VLAN mode of the switch, including di sable, port-base d, tag-based, m etro and double-ta g modes.
POEGEM12T2SFP User Manual 163 Alloy Computer Products Pty Lt d Copyright ©2006 set tag-group Synt ax: set tag-group <vid> <name > <range> <#> Description: Used to create or edit a tag -ba sed vlan g roup. Argument: vid: vlan ID name: vlan name range: vlan group members, syntax: 1,5-7 #: sym/asym vlan setting.
POEGEM12T2SFP User Manual 164 Alloy Computer Products Pty Lt d Copyright ©2006 set port-group Synt ax: set port-group <name> <range> Description: Used to create or edit a port-based VLAN group.
POEGEM12T2SFP User Manual 165 Alloy Computer Products Pty Lt d Copyright ©2006 set pvid Synt ax: set pvid <range> <pvid> Description: Used to set the vlan pvid for use when using t ag-based VLAN’ s. Argument: Range: which port(s) you want to set PVID(s).
POEGEM12T2SFP User Manual 166 Alloy Computer Products Pty Lt d Copyright ©2006 enable sym-vlan <range> Synt ax: enable sym-vlan <range> Description: Used to drop frames with a parti cula r VID that do not belon g to the same VLA N group. Argument: range: what port(s) you want to configure.
POEGEM12T2SFP User Manual 167 Alloy Computer Products Pty Lt d Copyright ©2006 enable drop-unt ag Synt ax: enable drop-unt ag <range> Description: Used to create a rule so that all untagg e d frames received on this port will be dro pped. Argument: range: which port(s) you want to configure.
POEGEM12T2SFP User Manual 168 Alloy Computer Products Pty Lt d Copyright ©2006 del tag-group <vid> Synt ax: del tag-group <vid> Description: Used to delete an existing t ag-b ased vlan group. Argument: vid: which vlan group you want to delete.
POEGEM12T2SFP User Manual 169 Alloy Computer Products Pty Lt d Copyright ©2006 show group Synt ax: show group Description: Used to display the vlan mode and vlan group(s). Argument: None Possible value: None Example: POEGEM12T2SFP(vlan)# show group Vlan mode is double-ta g.
POEGEM12T2SFP User Manual 170 Alloy Computer Products Pty Lt d Copyright ©2006 show pvid Synt ax: show pvid Description: Used to display the pvid and the ingress/egress rule(s).
POEGEM12T2SFP User Manual 171 Alloy Computer Products Pty Lt d Copyright ©2006 mac-t able <<info rmation>> show Synt ax : Show Description : Used to display all MAC table informatio n.
POEGEM12T2SFP User Manual 172 Alloy Computer Products Pty Lt d Copyright ©2006 search Synt ax : search <port > <mac> <vid> Description : Used to search the MAC table fo r speci fic MAC information.
POEGEM12T2SFP User Manual 173 Alloy Computer Products Pty Lt d Copyright ©2006 <<maint ain>> set aging Synt ax : set aging <#> Description : Used to set up the age out time value of MAC addresses learnt dynamically . Argument : <#> : age-timer in second s, 0, 10 to 65535.
POEGEM12T2SFP User Manual 174 Alloy Computer Products Pty Lt d Copyright ©2006 show Synt ax : show Description : Used to display the settings of age-timer .
POEGEM12T2SFP User Manual 175 Alloy Computer Products Pty Lt d Copyright ©2006 del Synt ax : del <mac> <vid> Description : Used to remove a selected st atic MAC address entry . Argument : <mac>: mac address, format: 00-02-03 -04-05-06 <vid>: vlan id.
POEGEM12T2SFP User Manual 176 Alloy Computer Products Pty Lt d Copyright ©2006 show filter Synt ax : show filter Description : Used to display the static MAC filter t able.
POEGEM12T2SFP User Manual 177 Alloy Computer Products Pty Lt d Copyright ©2006 del Synt ax : del <mac> Description : Used to delete a MAC alias entry .
POEGEM12T2SFP User Manual 178 Alloy Computer Products Pty Lt d Copyright ©2006 gvrp enable Synt ax : enable Description : Used to enable the GVRP function. Argument : None Possible value: None Example: POEGEM12T2SFP(gvrp)# enable : Enables GVRP on the switch.
POEGEM12T2SFP User Manual 179 Alloy Computer Products Pty Lt d Copyright ©2006 set timer Synt ax : set timer <range> <join> <l eave> <leaveall> Description : Used to set GVRP join time, leave time, and leaveall time for ea ch p ort.
POEGEM12T2SFP User Manual 180 Alloy Computer Products Pty Lt d Copyright ©2006 set applicant Synt ax : set applicant <range> <nor mal | non-particip ant> Description : Used to set default applicant mode for each port.
POEGEM12T2SFP User Manual 181 Alloy Computer Products Pty Lt d Copyright ©2006 show counter Synt ax : show counter Description : Usage: show counter <port> Argument : <port>: port number .
POEGEM12T2SFP User Manual 182 Alloy Computer Products Pty Lt d Copyright ©2006 show config Synt ax : show config Description : Used to display the GVRP config uration.
POEGEM12T2SFP User Manual 183 Alloy Computer Products Pty Lt d Copyright ©2006 show group Synt ax : show group Description : Used to show the GVRP group(s).
POEGEM12T2SFP User Manual 184 Alloy Computer Products Pty Lt d Copyright ©2006 stp enable Synt ax : enable Description : Used to enable the STP function. Argument : None Possible value: None Example: POEGEM12T2SFP(stp)# enable disable Synt ax : disable Description : Used to disable the STP function.
POEGEM12T2SFP User Manual 185 Alloy Computer Products Pty Lt d Copyright ©2006 set config Synt ax : set config <Bridge Priority > <Hello T ime> <Max. Age> <Forward Delay> Description : Used to configure the STP parameters. Argument : <Bridge Priority> :Priority must be a mu ltiple of 4096,a v ailable from 0 to 61440.
POEGEM12T2SFP User Manual 186 Alloy Computer Products Pty Lt d Copyright ©2006 set port Synt ax : set port <range> <p ath cost> <priority> <edge_port> <admin p2p > Description : Used to configure the port information of STP .
POEGEM12T2SFP User Manual 187 Alloy Computer Products Pty Lt d Copyright ©2006 show st at us Synt ax : show st at us Description : Used to display the status of STP .
POEGEM12T2SFP User Manual 188 Alloy Computer Products Pty Lt d Copyright ©2006 show config Synt ax : show config Description : Used to display the configuration of STP .
POEGEM12T2SFP User Manual 189 Alloy Computer Products Pty Lt d Copyright ©2006 s how port Synt ax : show port Description : Used to display the port information of STP .
POEGEM12T2SFP User Manual 190 Alloy Computer Products Pty Lt d Copyright ©2006 trunk set priority Synt ax : set priority <range> Description : Used to configure the LACP system priority settings. Argument : <range> : available from 1 to 65535.
POEGEM12T2SFP User Manual 191 Alloy Computer Products Pty Lt d Copyright ©2006 del trunk Synt ax : del trunk <port-range> Description : Delete trunk port Argument : <port-range> : synt ax 1,5-7 , available from 1 to 12 Possible value: None Example: POEGEM12T2SFP(trunk)# del trunk 1 : Deletes trunk group 1.
POEGEM12T2SFP User Manual 192 Alloy Computer Products Pty Lt d Copyright ©2006 show st at us Synt ax : show st at us Description : Used to display the aggregator st atus and the settings of each port.
POEGEM12T2SFP User Manual 193 Alloy Computer Products Pty Lt d Copyright ©2006 show aggtr - view Synt ax : show aggtr-view Description : Used to display the aggregator list.
POEGEM12T2SFP User Manual 194 Alloy Computer Products Pty Lt d Copyright ©2006 show lacp-detail Synt ax : show lacp -detail <aggtr> Description : Used to display detailed information of a LACP trun k grou p.
POEGEM12T2SFP User Manual 195 Alloy Computer Products Pty Lt d Copyright ©2006 show lacp-priorit y Synt ax : show lacp-priorit y Description : Used to display the value of LACP Priority .
POEGEM12T2SFP User Manual 196 Alloy Computer Products Pty Lt d Copyright ©2006 802.1x set state Synt ax : set state <ip > <port -number> <secret-ke y> Description : T o configure the settings related with 802.1X Radius Server . Argument : <ip>: the IP addre s s of the Radi us Server .
POEGEM12T2SFP User Manual 197 Alloy Computer Products Pty Lt d Copyright ©2006 set port-control Synt ax : set port-control <port-range> <authorised> Description : Use to set up the 802.
POEGEM12T2SFP User Manual 198 Alloy Computer Products Pty Lt d Copyright ©2006 set txPeriod Synt ax : set txPeriod <port-range> <sec> Description : A timer used by the Authenticator P AE state machine to determine when an EAPOL PDU is to be transmitted.
POEGEM12T2SFP User Manual 199 Alloy Computer Products Pty Lt d Copyright ©2006 set reAuthEnabled Synt ax : set reAuthEnabled <port-range> <ebl > Description : Defines whether a regular re-authe ntication will ta ke place on this port.
POEGEM12T2SFP User Manual 200 Alloy Computer Products Pty Lt d Copyright ©2006 set max-request Synt ax : set max-request <port-range> <times> Description : The maximum number of times that the st ate machine will retransmit an EAP Request packet to the Supplicant before it times out the authentication session.
POEGEM12T2SFP User Manual 201 Alloy Computer Products Pty Lt d Copyright ©2006 set serverTimeout Synt ax : set serverT imeout <port-range> <sec> Description : A timer used by the Backend .
POEGEM12T2SFP User Manual 202 Alloy Computer Products Pty Lt d Copyright ©2006 show mode Synt ax : show mode Description : Displays what mode each port is using.
POEGEM12T2SFP User Manual 203 Alloy Computer Products Pty Lt d Copyright ©2006 show security Synt ax : show security Description : Displays the authentication st atu s of each port.
POEGEM12T2SFP User Manual 204 Alloy Computer Products Pty Lt d Copyright ©2006 show param eter Synt ax : show para me ter Description : Displays the parameter settings of each port. Argument : None Possible value: None Example: POEGEM12T2SFP(802.1x)# show p arameter Port.
POEGEM12T2SFP User Manual 205 Alloy Computer Products Pty Lt d Copyright ©2006 alarm <<event s>> set Synt ax : set sms <range> set email <range> set trap <range> set all <range> Description : Used to activate the dif ferent alarm event s su ppo rted including sms, email and tra ps.
POEGEM12T2SFP User Manual 206 Alloy Computer Products Pty Lt d Copyright ©2006 del Synt ax : del sms <range> del email <range> del trap <range> del all <range> Description : Used to de-activate the different ala rm event s supported including sms, email and trap s.
POEGEM12T2SFP User Manual 207 Alloy Computer Products Pty Lt d Copyright ©2006 show Synt ax: show Description: Displays the configuration of the alarm event s.
POEGEM12T2SFP User Manual 208 Alloy Computer Products Pty Lt d Copyright ©2006 <<email>> set Synt ax : set server <ip > set user <usernam e> set mail-address <#> <mail addres s> Description : Used for the configuration of the e-mail se rver , username, password and email address.
POEGEM12T2SFP User Manual 209 Alloy Computer Products Pty Lt d Copyright ©2006 del Synt ax : del <#> Description : Used to remove the configuration of the E-mail add ress. Argument : <#>: email address numb er , range: 1 to 6 Possible value: <#>: 1 to 6 Example: POEGEM12T2SFP(alarm-email)# del 2 : Deletes email recipient 2.
POEGEM12T2SFP User Manual 210 Alloy Computer Products Pty Lt d Copyright ©2006 <<sms>> set Synt ax : set server <ip > set user <usernam e> set phone-number <#> <p hone-number> Description : Used for the configuration of the SMS server , username, password and phone numbe r .
POEGEM12T2SFP User Manual 21 1 Alloy Computer Products Pty Lt d Copyright ©2006 del Synt ax : del <#> Description : Used to remove the configuration of a mobile ph one n umber .
POEGEM12T2SFP User Manual 212 Alloy Computer Products Pty Lt d Copyright ©2006 show (alarm) Synt ax : show Description : Display’s the config uration of T rap, SMS or E-mail.
POEGEM12T2SFP User Manual 213 Alloy Computer Products Pty Lt d Copyright ©2006 diag diag Synt ax: diag Description: Diag is used to test the UART , DRAM, Flash and EEPROM.
POEGEM12T2SFP User Manual 214 Alloy Computer Products Pty Lt d Copyright ©2006 ping Synt ax: ping <ip> Description: Used to test connectivity between othe r IP based d evices on your network. Argument: [ip] : ip address or domain name Possible value: IP address, e .
POEGEM12T2SFP User Manual 215 Alloy Computer Products Pty Lt d Copyright ©2006 log show Synt ax: show Description: Display’s a list of trap log event s. If a trap event occurs, it will be recorded into the log. The log can hold up to 120 record s.
POEGEM12T2SFP User Manual 216 Alloy Computer Products Pty Lt d Copyright ©2006 clear Synt ax: clear Description: Used to clear the log data. Argument: None. Possible value: None. Example: POEGEM12T2SFP(log)# clear upload Synt ax: Upload Description: Used to upload log data throug h TFTP .
POEGEM12T2SFP User Manual 217 Alloy Computer Products Pty Lt d Copyright ©2006 enable auto-upload Synt ax: enable auto-upload Description: Used to enable the auto-upload fun ction.
POEGEM12T2SFP User Manual 218 Alloy Computer Products Pty Lt d Copyright ©2006 firmware set upgrade-path Synt ax : set upgrade-path <filep ath> Description : Sets the firmware file needed to upg ra de the switch.
POEGEM12T2SFP User Manual 219 Alloy Computer Products Pty Lt d Copyright ©2006 show Synt ax : show Description : Display’s the TFTP server and upgrade - path information. Argument : None Possible value: None Example: POEGEM12T2SFP(firmware)# show TFTP Server IP Address: 192.
POEGEM12T2SFP User Manual 220 Alloy Computer Products Pty Lt d Copyright ©2006 config-file set export-path Synt ax : set export-path <filep ath> Description : T o set the filepath and filename that will be used to export the confi guration of the switch.
POEGEM12T2SFP User Manual 221 Alloy Computer Products Pty Lt d Copyright ©2006 e xport st art Synt ax : export start Description : Exports the st art up configuration of the switch. Argument : None Possible value: None Example: POEGEM12T2SFP(config-file)# export st art Export succe ssful.
POEGEM12T2SFP User Manual 222 Alloy Computer Products Pty Lt d Copyright ©2006 import start Synt ax : import start Description : Imports the st artup configuration into the switch. Argument : None Possible value: None Example: POEGEM12T2SFP(config-file)# import st art Import successful.
POEGEM12T2SFP User Manual 223 Alloy Computer Products Pty Lt d Copyright ©2006 show Synt ax : show Description : Display’s the config -file information. Argument : None Possible value: None Example: POEGEM12T2SFP(config-file)# show TFTP Server IP Address: 192.
POEGEM12T2SFP User Manual 224 Alloy Computer Products Pty Lt d Copyright ©2006 tft p set server Synt ax : set server <ip > Description : T o set up the IP address of the TFTP server . Argument : <ip>: TFTP server ip Possible value: <ip>: TFTP server ip Example: POEGEM12T2SFP(tf tp)# set server 192.
POEGEM12T2SFP User Manual 225 Alloy Computer Products Pty Lt d Copyright ©2006 hostname hostname Synt ax : hostname Description : Used to configure a hostname for the switch. Argument : <name>: hostname, max 128 ch aracters. Possible value: <name>: hostname, max 128 ch aracters.
POEGEM12T2SFP User Manual 226 Alloy Computer Products Pty Lt d Copyright ©2006 reboot reboot Synt ax: reboot Description: Used to reboot the switch.
POEGEM12T2SFP User Manual 227 Alloy Computer Products Pty Lt d Copyright ©2006 Appendix A T echnical S pecifications Hardware Specifications St andard Compliance: IEEE802.
POEGEM12T2SFP User Manual 228 Alloy Computer Products Pty Lt d Copyright ©2006 Back pressure flow control for half duplex Cable and Maximum Length: TP Cat.
POEGEM12T2SFP User Manual 229 Alloy Computer Products Pty Lt d Copyright ©2006 Appendix B Null Modem Cable S pecifications The DB-9 cable is used for con ne cting a terminal or terminal emulator to the Managed Switch’ s RS-232 port to access the co mmand-line interface.
POEGEM12T2SFP User Manual 230 Alloy Computer Products Pty Lt d Copyright ©2006.
Een belangrijk punt na aankoop van elk apparaat Alloy POEGEM12T2SFP (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Alloy POEGEM12T2SFP heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Alloy POEGEM12T2SFP vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Alloy POEGEM12T2SFP leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Alloy POEGEM12T2SFP krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Alloy POEGEM12T2SFP bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Alloy POEGEM12T2SFP kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Alloy POEGEM12T2SFP . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
