Gebruiksaanwijzing /service van het product OB60 van de fabrikant Fisher & Paykel
Ga naar pagina of 60
Built-in ov en Installation instructions and User guide NZ A U GB IE OB60 single, double and tow er multifunction models.
.
1 Safety and warnings 2 Installation instructions 6 SEVEN-FUNC TION SINGLE OVEN MODELS Using y our oven f or the first time 16 Clock and timer 17 Using y our oven 18 Cooking functions 19 Automa tic co.
2 Safety and warnings W ARNING! Cut Hazard T ake care - panel edges are sharp . F ailure to use caution could result in injury or cuts. W ARNING! Electrical Shock Hazard Alway s disconnect the oven from the mains electricity supply before carrying out any maintenance operations or r epairs.
3 The oven will rest on a surface that can support its weight. The benchtop and oven c avity are square and level, and are the required dimensions. The height from the floor suits the user .
4 Operation Y our built-in oven has been carefully designed to operate saf ely during normal cooking procedures . Please keep the following guidelines in mind when y ou are using your ov en: W ARNING! Hot Sur face Hazard Acc essible parts may become hot when this oven is in use .
5 Impor tant safet y precautions Isolating switch: make sure this ov en is connected to a circuit which incorporates an isolating switch providing full disconnection from the power supply . Household appliances are not intended to be played with by children.
6 Installation instructions Installation diagrams for illustr ation purposes only 2.5 mm 16-20 mm L Product and cabinetry dimensions (mm) A overall height* of product 597 B overall width of product 59.
7 Installation instructions 2.5 mm 16-20 mm L Product and cabinetry dimensions (mm) Double To w e r A overall height* of product 888 1077 B overall width of product 595 595 C overall depth of product .
8 Impor tant: Please take extra care not to damage the lo wer trim of the oven. The space between the bottom of the door and the low er trim is important for the correct air circulation into the ov en. Ensure the oven sits on w ooden blocks or similar supports when it is removed from the carton as shown in F ig.
9 Air circulation Impor tant: Please take extra care not to damage the lo wer trim of the oven. The space between the bottom of the door and the low er trim is important for the correct air circulation into the ov en. Ensure the oven sits on w ooden blocks or similar supports when it is removed from the carton as shown in F ig.
10 230-240 V~ 3095-3370W 230-240 V~ 2350-2550W E N L 1 (L ) 2 1 Unhook the terminal board co ver by inserting a screwdriver into the two hooks “ A” (F ig. 7). 2 Open the cable crimp by unscrewing screw “F” (Fig . 8), unscrew the terminal scr ews and remov e the cable.
11 Connecting the pow er supply cable Double and T ower oven models 1 Unscrew the screw “ A” securing the cov er plate “B” behind the oven (F ig. 9). 2 Remove the co ver plate “B” . 3 Remove the screw s “C” from the cable clamp (F ig. 10).
12 Seven-function single oven NZ A U models W iring diagrams Fig . 11a S1 S2 F1 PR 1 6 1a 6a 4 9 4a 9a 3 8 3a 8a 2 7 2a 7a 5 10 11 5a 10a 11a C G S V CIR TM CF N/7 1 1 a L/8 LF1 TL T N L M LF2 Seven-f.
13 W iring diagrams F our-function single oven models (available in A ustralia only) LF2 C G S V TL TE S1 S2 F1 T CF N L M PR N/7 1 1 a L/8 1 4 3 2 5 P2 P1 P3 LF1 Fig. 12 6 6a 4 9 4a 9a 3 8 3a 8a 7 7a 5 10 11 5a 10a 11a C S G V CIR LF T C1 G1 S1 LF2 TL1 TL2 M N L TL3 1 4 3 P2 LF1 F1 1 1a 2 2a N/7 1 1 a L/8 F2 S2 E2 E1 PR CF 2 5 P1 P3 S1 Fig.
14 T ower ov en models W iring diagrams Fig. 14.
15.
16 Using y our ov en for the rst time Fig . 15 Control panel SEVEN-FUNCTION SINGLE MODELS T emperature knob Control butt ons F unction knob Before using y our new oven, please: 1 Read this user guide, taking special note of the ‘Safety and warnings’ section.
17 Clock and timer Fig . 17 Clock display and control buttons SEVEN-FUNCTION SINGLE MODELS Buttons Timer Cooking time End of cooking time Manual position; and cancels the set program Decreases the num.
18 Using y our ov en 1 Select the func tion using the function k nob . The oven lights will c ome on. 2 Select the temperature using the temperature control knob. The oven temperatur e indicator light, above the temperatur e knob on the control panel, will glow until the oven has r eached the set temperature, and then it will go out.
19 OVEN LAMP Only the oven light comes on. It remains on in all the cooking functions. BAKE The upper and lower heating elements c ome on. BAKE is the traditional method of cooking. It is best to cook on only one shelf at a time in this function. GRILL The grill at the top of the ov en comes on.
20 Cooking functions SEVEN-FUNCTION SINGLE MODELS FA N B A K E The upper and lower heating elements and the fan c ome on. Impor tant! Safe food handling: leave food in the oven for as short a time as possible before and af ter cooking or defrosting. This is to avoid c ontamination by organisms which may cause food poisoning .
21 Use automatic cooking to automatically turn the ov en on, cook, and then turn the oven off . 1 Check the clock shows the corr ect time. 2 Select the func tion and temperature . The oven will c ome on. 3 Decide how long the food will take to c ook, allowing time for preheating if necessary .
22 Using y our ov en for the rst time Fig . 21Control panel Before using y our new oven, please: 1 Read this user guide, taking special note of the ‘Safety and warnings’ section. 2 Remove all acc essories and packaging. 3 Set the clock. The o ven will not work until the clock has been set.
23 Clock, timer and automatic switch-o Setting the clock When the oven is first connected, or after a pow er failure, ‘0 . 00’ will flash on the display . T o set the clock , push the button, then the or buttons. Using the timer The timer can be set for a maximum period of 99 minutes and 50 sec onds.
24 Cooking functions OVEN LAMP Only the oven light comes on. It remains on in all the cooking functions. BAKE The upper and lower heating elements c ome on. BAKE is the traditional method of cooking. It is best to cook on only one shelf at a time in this function.
25 Cooking functions Notes on baking and roasting: Only use the fat filter for r oasting. Remov e before baking. Alwa ys clean the filter after cooking. Preheat the o ven befor e baking. Do not place anything , including water or ice, on the o ven floor .
26 Double models Fig . 27 Control panel DOUBLE MODELS Using the main low er oven f or the first time Before using y our new oven, please: 1 Read this user guide, taking special note of the ‘Safety and warnings’ section. 2 Remove all acc essories and packaging.
27 DOUBLE MODELS Clock and timer Fig . 29 Clock display and control buttons Buttons Timer Cooking time End of cooking time Manual position; and cancels the set program Decreases the number shown on th.
28 Using the main lo wer o ven DOUBLE MODELS Fig . 30 Function knob Fig . 31 T emperature knob 1 Select the func tion using the function control knob. The oven lights will come on.
29 DOUBLE MODELS Lo wer o ven c ooking func tions OVEN LAMP Only the oven light comes on. It remains on in all the cooking functions. BAKE The upper and lower heating elements c ome on. BAKE is the traditional method of cooking. It is best to cook on only one shelf at a time in this function.
30 DOUBLE MODELS Lo wer o ven c ooking func tions FA N B A K E The upper and lower heating elements and the fan c ome on. Impor tant! Safe food handling: leave food in the oven for as short a time as possible before and af ter cooking or defrosting. This is to avoid c ontamination by organisms which may cause food poisoning .
31 Note: automatic cooking is av ailable on the lower (main) ov en only . Use automatic cooking to automatically turn the ov en on, cook, and then turn the oven off . 1 Check the clock shows the corr ect time. 2 Select the func tion and temperature . The oven will c ome on.
32 Upper oven Using the upper o ven f or the rst time DOUBLE MODELS Before using y our new oven, please: 1 Read this user guide, taking special note of the ‘Safety and warnings’ section. 2 Remove all acc essories and packaging. 3 Condition the oven: Put in the shelf and tray .
33 DOUBLE MODELS Upper ov en cooking func tions OVEN LAMP Only the oven light comes on. It remains on in all the cooking functions. BAKE The upper and lower heating elements c ome on. BAKE is the traditional method of cooking. It is best to cook on only one shelf at a time in this function.
34 T ow er models Fig . 35 Control panel T OWER MODELS Using the ov ens for the first time Before using y our new ovens, please: 1 Read this user guide, taking special note of the ‘Safety and warnings’ section. 2 Remove all acc essories and packaging.
35 T OWER MODELS Clock and timer Fig . 37 Clock display and control buttons Buttons Timer Cooking time End of cooking time Manual position; and cancels the set program Decreases the number shown on th.
36 Using the o vens Fig . 38 Function knob Fig . 39 T emperature knob 1 Select the func tion using the function control knob. The oven lights will come on.
37 Cooking functions OVEN LAMP Only the oven light comes on. It remains on in all the cooking functions. BAKE The upper and lower heating elements c ome on. BAKE is the traditional method of cooking. It is best to cook on only one shelf at a time in this function.
38 Cooking functions FA N B A K E The upper and lower heating elements and the fan c ome on. Impor tant! Safe food handling: leave food in the oven for as short a time as possible before and af ter cooking or defrosting. This is to avoid c ontamination by organisms which may cause food poisoning .
39 Note: automatic cooking is av ailable on the upper oven only . Use automatic cooking to automatically turn the ov en on, cook, and then turn the oven off . 1 Check the clock shows the corr ect time. 2 Select the func tion and temperature f or the upper oven.
40 Car e and cleaning Impor tant! Before you start cleaning your oven, please: Read these cleaning instructions and the ‘Safet y and warnings ’ section at the star t of this user guide. T urn the oven off at the wall . Make sure the ov en is a safe temperature to touch.
41 Cleaning the inside of your ov en (single and tow er models and double lower o ven) Do not use abrasive cleaners, cloths or pads to clean the enamel . Do not use any ov en cleaners, abrasive cleaners, ammonia-based cleaners , products containing acids or alkalis, or detergents on the catalytic panels (not supplied with all models).
42 Car e and cleaning Cleaning the enamel cavity Clean the enamel on the inside of the oven when it has cooled do wn, using household detergents or an ammonia-based cleaner . Y ou may use ‘ off the shelf ’ oven cleaners, if you carefully follo w the manufacturers’ instructions.
43 Sliding shelf supports (some models only) The telescopic sliding shelf supports make it safer and easier to insert and remove the ov en shelves and trays . They stop when they are pulled out t o the maximum position. Wipe the supports with a damp cloth and a mild detergent only.
44 Car e and cleaning Fig .27 Fig .47a Cleaning the oven door glass Do not use harsh abrasive cleaners or sharp metal scrapers to clean the oven door glass since they scratch the surface, which may result in shattering of the glass . SINGLE and TOWER MODELS Removing the inner and middle panes of glass These oven doors ha ve three panes of glass.
45 Car e and cleaning 3 Remove the middle pane: Gently unlock the middle pane of glass from the bottom clamps by mo ving it as in Fig . 4 8 b. Gently lift the bottom edge of the pane (arrow 1 in F ig. 48c) and remove it by pulling it out from the top clamps (arro w 2 in Fig .
46 Car e and cleaning Fig .49a Replacing the middle and inner panes of glass 1 Make sure the door is locked open (see Figs 47a - 47c). 2 Replace the middle pane: Check that the four rubber pads are in place (“M” in Fig . 49a). Check that you are holding the pane the correct way .
47 Car e and cleaning Fig .50a Fig .50b Fig .50c D E F G A H Fig .50d Fig .50e Fig .50f 3 Replace the inner pane: Check that the four rubber pads are in place (“D” in Fig. 50a). Check that you are holding the pane the correct way . Y ou should be able to read the wording on it as it faces y ou.
48 Car e and cleaning Fig .27 Fig .51a DOUBLE MODELS The lower o ven has three panes of glass. T o clean these, you need to r emove the inner and middle panes.
49 Car e and cleaning 3 Remove the middle pane: Gently unlock the middle pane of glass from the bottom clamps by mo ving it as in Fig . 5 2 b. Gently lift the bottom edge of the pane (arrow 1 in F ig. 52c) and remove it by pulling it out from the top clamps (arro w 2 in Fig .
50 Car e and cleaning Low er oven door Replacing the middle and inner panes of glass 1 Make sure the door is locked open (see Figs 51a - 51c). 2 Replace the middle pane: Check that the four rubber pads are in place (“M” in Fig . 53a). Check that you are holding the pane the correct way .
51 Car e and cleaning 3 Replace the inner pane: Check that the four rubber pads are in place (“D” in Fig. 54a). Check that you are holding the pane the correct way . Y ou should be able to read the wording on it as it faces y ou. Inser t the pane in the left “E” and right “F” slide guides (Fig .
52 G Car e and cleaning Fig .55a Upper oven door Removing the inner pane of glass 1 Lock the door open: F ully open the oven door (F ig. 55a). F ully open the lever “ A ” on the left and right hinges (Fig . 55b). 2 Remove the inner pane: Remove the seal “G” by unhook ing the three fixing hooks (F ig.
53 Car e and cleaning A D G E F H Upper oven door Replacing the inner pane of glass 1 Replace the inner pane: Check that the four rubber pads are in place (“D” in Fig. 56a). Check that you are holding the pane the correct way . Y ou should be able to read the wording on it as it faces y ou.
54 Car e and cleaning Removing the ov en door(s) The oven door(s) can easily be r emoved as foll ows : Open the door to its full extent (Fig . 57a). Open the lever “ A ” completely on the left and right hinges (Fig . 57b). Hold the door (Fig .57c).
55 Car e and cleaning A B B C 1 2 A A Replacing the oven lamp Let the ov en cavity and the heating elements cool down. Left lamp (single models, tow er models and lower double o ven only): Remove the side rack (and the side catalytic panel if supplied) by unscr ewing the fixing screws.
56 W arranty and ser vice Before y ou call for service or assistance ... Check the things you can do yourself . Refer to the installation instructions and your user guide and check that: 1 Y our product is correctly installed. 2 Y ou are familiar with its normal operation.
.
Copyright © F isher & P aykel 2008. All rights reserved. The product specifications in this booklet apply to the specific products and models described at the date of issue. Under our policy of continuous product improvement, these specifications may change at an y time.
Een belangrijk punt na aankoop van elk apparaat Fisher & Paykel OB60 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Fisher & Paykel OB60 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Fisher & Paykel OB60 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Fisher & Paykel OB60 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Fisher & Paykel OB60 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Fisher & Paykel OB60 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Fisher & Paykel OB60 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Fisher & Paykel OB60 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
