Gebruiksaanwijzing /service van het product MP615/MP107 van de fabrikant Alpes USA
Ga naar pagina of 34
MP615/MP107 MPEG-2 video player User guide WWW.ALPEG.COM.
Rev 1.5 Page 1 CONTENTS 2 . C O M P O S I T I O N 2 3 . U S A G E 3 3.1 The player 3 3.1.1 Script file 3 3.1.2 Videos 3 3.1.3 File transfer 3 Introduction to the FTP transfer protocol 4 3.2 Controls and access methods 5 3.2.2 Network connection 5 3.2.
Rev 1.5 Page 2 2. Composition The digital video player is made up of a play er section and the follo wing different m odules: - A network connection. - An RS232 connection.
Rev 1.5 Page 3 3. Usage 3.1 The player When you turn the player on, the script read er starts up automatically after about 30 seconds. You must verify beforehand that the disk is indeed plugged in and that the key locking is activated.
Rev 1.5 Page 4 Introduction to the FTP transfer protocol FTP = File Transfer protocol . After electronic m ail and the WEB, FTP is another Interne t service that evolutions in technology have made much easier to use, but the aspect of wh ich is still not very user- friendly.
Rev 1.5 Page 5 On the contrary, others, before giving you access, ask you to fill out a little form. It's nothing to worry about, and won't present any problems if your intentions are honest.
Rev 1.5 Page 6 3.2.3 RS232 Connection The RS232 connections allow the player to be driven. - See programming chapter - See connection appendix 3.2.4 Parallel electronic GPI connector Enable a video nu.
Rev 1.5 Page 7 4 How to write script(s) 4.1 Language *: equals a space 4.1.1 Play Allows a script to be read Command: Play file_name_mpeg (option). Options: - * /f : no transition to black be tween two video files. - */l,n : read the video file ‘n’ times.
Rev 1.5 Page 8 4.1.6 R Allows a specific command to be sent to another channel by the series port. There are 3 commands possible : - R*x,KEYyy : read on player n°x, script corresponding to event yy - R*x,MPG/clips/fichier.mpg : read on player n°x video file.
Rev 1.5 Page 9 4.2.3 Example 3 play/clips/pubsony.mpg wait 2 SC01 Goto 1 10 : SC02 Goto 1 This script plays the pubsony.mpg video, waits 2 seconds, reads the SC01 script and returns to the beginning. If event n°10 is called up, the SC02 scrip t will be read and will then return to the beginning of the script.
Rev 1.5 Page 10 270 5 Appendices 5.1 diagram of DB25 GPI parallel connector wiring (dry contact) 5 channels can be accessed. ATTENTION: If fewer channels are used, th e contacts must impe ratively be earthed (grounded). The closing of contact 1 activates an action a ssociated to a command number 1 (example in the file SC00: 1: play /clips/video1.
Rev 1.5 Page 11 The closing of contact 2 activates an action a ssociated to a command number 2 (example in the file SC00: 2: play /clips/video2.mpg ). The closing of contact 3 activates an action a ssociated to a command number 4 (example in the file SC00: 4: play /clips/video3.
Rev 1.5 Page 12 5.2 Language capacity 5.2.1 sub-scripts. The player allows up to 10 linke d sub-scripts to be called up. Example: In the file SC00: Play /clips/file.m pg SC01 5.2.2 Video player Because of the FAT32 system, the maximum size for one single video file is 4 Go.
Rev 1.1 Page 13 6. HTML dialogue pages: 6.1 Main page : Open your Internet explorer and type in the following address of the player: http://10.16.99.107 the screen shown below will appear.
Rev 1.1 Page 14 6.2 Network interface page: 6.2.1 TCP/IP: To communicate with the player for the first time , the follow ing initial steps must be taken: Network configuration of lo cal computer is re.
Rev 1.1 Page 15 6.2.2 Programming example so that the player is accessi ble by the following type of PC address: 192.168.0.10 After having accessed the interface, you w ill get the following screen: n.
Rev 1.1 Page 16 6.2.3 Network interface 2 (factory parameters below) 2) Change the configuration by modifying the 5 fields as shown in diagram 4 Diagram 3: network interface page 2.
Rev 1.1 Page 17 3 ) After any modification, remember to SAVE, return to the previous interface to check the new address in the “permanent interfaces” then turn the player off and on again to make the new address an active one.
Rev 1.1 Page 18 5) Reprogramming the TCP/IP properties of your computer to access the new address, in the current example this could be: IP Address: 198.
Rev 1.1 Page 19 6.3 Direct TCP/IP reading control page. It is possible to control the Alpeg play er by network with the following page: By pressing o n this button, the player sends information about what it is currently doing.
Rev 1.1 Page 20 6. 4 Main script editor page : Writing the script is done entirely using the mouse intuitively, all you have to do is choose the commands, The MPEG2 files to be read are to be chosen, and everything is to be saved in an exisitng script file or in a new script.
Rev 1.1 Page 21 Editing page with the SC00 file open..
Rev 1.1 Page 22 6.4.1 Script editing pages: This is in text mode, also called "expert mode". In this area, all the scripts appearing i n the player are listed.
Rev 1.1 Page 23 6.4.2 Opening a script in expert mode. There is always, for all players, a defa ult scrip t text file called “SC00”.
Rev 1.1 Page 24 The file that has been saved is shown here. 6.4.3 Saving a script file To write a script, please use the language chapt er instructions.
Rev 1.1 Page 25 6.5.Player status page (RS232 address) If the player is linked to a nother player, the number of the player must be defined here This is how to give an addres s to the RS232 p ort of t.
Rev 1.1 Page 26 6.6 Factory preset page : Restore the original TCP/I P configuration; the sound volume will be restored the next time the player is switched on.
Rev 1.1 Page 27 6.7: MP615 Front panel: Lock key for har d disk Extractible hard disk ON/OFF switch.
Rev 1.1 Page 28 6.8 MP107 Front panel: On/off button behind the hatch..
Rev 1.1 Page 29 6.9 MP107 Rear Panel: General on/off s witch Power plug Network connection Dry contact socket RS232 input Not used Audio Stere o Output Direct video o utput Y/C, CVBS or YUV by adapter .
Rev 1.1 Page 30 6.10 MP615 Rear panel: YUV= Blue :2, Red :3, Green :4 RGsB=Blue :2, Red :3, Green :4 2 3 4 Locking of fro nt panel switch to a void an accidental switching off of the front switch 0=locked posit ion TCP/IP network con nector 10/100 baseT Table showing position of switches according to video outputs.
Rev 1.1 Page 31 RS232 Commands and protocol : Protocol: 9600,n,8,1. Each instruction must be ended with a carriage return. (Od h ). You will receive an Echo back. After each command sent by RS232, in return, th e player sends the following channel status : * equals “space” STAT*n*/clips/ filename .
Rev 1.1 Page 32 Spécifications 2 : Description Specifications Model number MP 615 Video Compression MP@ML , ISO 13818-2 Accepted MPEG Formats MPEG-1 system stream s MPEG-2 program stream at Half D1, 2/3D1, FullD1, CCIR 60 1. NTSC & PAL colour systems.
Rev 1.1 Page 33.
Een belangrijk punt na aankoop van elk apparaat Alpes USA MP615/MP107 (of zelfs voordat je het koopt) is om de handleiding te lezen. Dit moeten wij doen vanwege een paar simpele redenen:
Als u nog geen Alpes USA MP615/MP107 heb gekocht dan nu is een goed moment om kennis te maken met de basisgegevens van het product. Eerst kijk dan naar de eerste pagina\'s van de handleiding, die je hierboven vindt. Je moet daar de belangrijkste technische gegevens Alpes USA MP615/MP107 vinden. Op dit manier kan je controleren of het apparaat aan jouw behoeften voldoet. Op de volgende pagina's van de handleiding Alpes USA MP615/MP107 leer je over alle kenmerken van het product en krijg je informatie over de werking. De informatie die je over Alpes USA MP615/MP107 krijgt, zal je zeker helpen om een besluit over de aankoop te nemen.
In een situatie waarin je al een beziter van Alpes USA MP615/MP107 bent, maar toch heb je de instructies niet gelezen, moet je het doen voor de hierboven beschreven redenen. Je zult dan weten of je goed de alle beschikbare functies heb gebruikt, en of je fouten heb gemaakt die het leven van de Alpes USA MP615/MP107 kunnen verkorten.
Maar de belangrijkste taak van de handleiding is om de gebruiker bij het oplossen van problemen te helpen met Alpes USA MP615/MP107 . Bijna altijd, zal je daar het vinden Troubleshooting met de meest voorkomende storingen en defecten #MANUAl# samen met de instructies over hun opplosinge. Zelfs als je zelf niet kan om het probleem op te lossen, zal de instructie je de weg wijzen naar verdere andere procedure, bijv. door contact met de klantenservice of het dichtstbijzijnde servicecentrum.
